From f9560bc615c9f3257ae1ba919aedb6786c116d83 Mon Sep 17 00:00:00 2001 From: Frank Brehm Date: Thu, 8 Nov 2012 23:37:25 +0100 Subject: [PATCH] Current state --- config-archive/etc/conf.d/postgrey | 55 ++ config-archive/etc/postfix/main.cf | 13 +- config-archive/etc/postfix/main.cf.1 | 2 +- config-archive/etc/postfix/main.cf.2 | 736 ++++++++++++++++++++++++ config-archive/etc/postfix/main.cf.dist | 4 +- config-archive/etc/screenrc | 357 ++++++++++++ config-archive/etc/screenrc.dist.new | 356 ++++++++++++ init.d/dhcpcd | 22 +- postfix/main.cf | 4 +- rkhunter.conf | 24 +- 10 files changed, 1538 insertions(+), 35 deletions(-) create mode 100644 config-archive/etc/conf.d/postgrey create mode 100644 config-archive/etc/postfix/main.cf.2 create mode 100644 config-archive/etc/screenrc create mode 100644 config-archive/etc/screenrc.dist.new diff --git a/config-archive/etc/conf.d/postgrey b/config-archive/etc/conf.d/postgrey new file mode 100644 index 0000000..c88be74 --- /dev/null +++ b/config-archive/etc/conf.d/postgrey @@ -0,0 +1,55 @@ +# Config file for /etc/init.d/postgrey + +# LISTEN TYPE +# Set to 'inet' if you want to use a TCP socket. +# Set to 'unix' if you want to use an UNIX socket. +POSTGREY_TYPE="unix" + +# HOST +# What IP should postgrey bind to? +# Leave unchanged unless you know what you are doing. +# (ignored if POSTGREY_TYPE is set to 'unix') +POSTGREY_HOST="127.0.0.1" + +# PORT +# What TCP port should postgrey listen on? +# (ignored if POSTGREY_TYPE is set to 'unix') +POSTGREY_PORT="10030" + +# SOCKET +# Unix socket to listen on, if POSTGREY_TYPE is set to 'unix'. +# Leave unchanged unless you know what you are doing. +# (ignored if POSTGREY_TYPE is set to 'inet') +POSTGREY_SOCKET="/var/spool/postfix/private/postgrey" + +# PID +# Postgrey pid file. +# Do not change, if you don't know what this is! +POSTGREY_PID="/var/run/postgrey.pid" + +# DELAY +# How long to delay mail that is greylisted in seconds. +POSTGREY_DELAY=300 + +# TEXT +# The response we'll send back with delayed mail. +POSTGREY_TEXT="Greylisted for %s seconds" + +# Additional Postgrey options +# +# -v, --verbose increase verbosity level +# --max-age=N delete entries older than N days since the last time +# that they have been seen (default: 30) +# --retry-window=N allow only N days for the first retrial (default: 2) +# append 'h' if you want to specify it in hours +# --greylist-action=A if greylisted, return A to Postfix (default: DEFER_IF_PERMIT) +# --lookup-by-subnet strip the last 8 bits from IP addresses (default) +# --lookup-by-host do not strip the last 8 bits from IP addresses +# --whitelist-clients=FILE default: /etc/postfix/postgrey_whitelist_clients +# --whitelist-recipients=FILE default: /etc/postfix/postgrey_whitelist_recipients +# +# Note that the --whitelist-x options can be specified multiple times, and that +# per default /etc/postfix/postgrey_whitelist_clients.local is also read, so +# that you can put there local entries. +# +POSTGREY_OPTS="" diff --git a/config-archive/etc/postfix/main.cf b/config-archive/etc/postfix/main.cf index 6bac0c9..044fe07 100644 --- a/config-archive/etc/postfix/main.cf +++ b/config-archive/etc/postfix/main.cf @@ -41,7 +41,7 @@ command_directory = /usr/sbin # daemon programs (i.e. programs listed in the master.cf file). This # directory must be owned by root. # -daemon_directory = /usr/lib64/postfix +daemon_directory = /usr/libexec/postfix # The data_directory parameter specifies the location of Postfix-writable # data files (caches, random numbers). This directory must be owned @@ -460,7 +460,12 @@ unknown_local_recipient_reject_code = 550 # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # -#mailbox_transport = lmtp:unix:/file/name +# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd" +# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf. +#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp +# +# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and +# subsequent line in master.cf. #mailbox_transport = cyrus # The fallback_transport specifies the optional transport in master.cf @@ -637,7 +642,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.8.9/html +html_directory = /usr/share/doc/postfix-2.9.3/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -650,7 +655,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.8.9/readme +readme_directory = /usr/share/doc/postfix-2.9.3/readme home_mailbox = .maildir/ #alias_maps = mysql:/etc/postfix/mysql-aliases.cf alias_maps = hash:/etc/postfix/maps/aliases diff --git a/config-archive/etc/postfix/main.cf.1 b/config-archive/etc/postfix/main.cf.1 index 01dffb3..6bac0c9 100644 --- a/config-archive/etc/postfix/main.cf.1 +++ b/config-archive/etc/postfix/main.cf.1 @@ -41,7 +41,7 @@ command_directory = /usr/sbin # daemon programs (i.e. programs listed in the master.cf file). This # directory must be owned by root. # -daemon_directory = //usr/lib64/postfix +daemon_directory = /usr/lib64/postfix # The data_directory parameter specifies the location of Postfix-writable # data files (caches, random numbers). This directory must be owned diff --git a/config-archive/etc/postfix/main.cf.2 b/config-archive/etc/postfix/main.cf.2 new file mode 100644 index 0000000..01dffb3 --- /dev/null +++ b/config-archive/etc/postfix/main.cf.2 @@ -0,0 +1,736 @@ +# vim: noai: filetype=pfmain ts=4 sw=4 + +# Global Postfix configuration file. This file lists only a subset +# of all parameters. For the syntax, and for a complete parameter +# list, see the postconf(5) manual page (command: "man 5 postconf"). +# +# For common configuration examples, see BASIC_CONFIGURATION_README +# and STANDARD_CONFIGURATION_README. To find these documents, use +# the command "postconf html_directory readme_directory", or go to +# http://www.postfix.org/. +# +# For best results, change no more than 2-3 parameters at a time, +# and test if Postfix still works after every change. + +# SOFT BOUNCE +# +# The soft_bounce parameter provides a limited safety net for +# testing. When soft_bounce is enabled, mail will remain queued that +# would otherwise bounce. This parameter disables locally-generated +# bounces, and prevents the SMTP server from rejecting mail permanently +# (by changing 5xx replies into 4xx replies). However, soft_bounce +# is no cure for address rewriting mistakes or mail routing mistakes. +# +#soft_bounce = no + +# LOCAL PATHNAME INFORMATION +# +# The queue_directory specifies the location of the Postfix queue. +# This is also the root directory of Postfix daemons that run chrooted. +# See the files in examples/chroot-setup for setting up Postfix chroot +# environments on different UNIX systems. +# +queue_directory = /var/spool/postfix + +# The command_directory parameter specifies the location of all +# postXXX commands. +# +command_directory = /usr/sbin + +# The daemon_directory parameter specifies the location of all Postfix +# daemon programs (i.e. programs listed in the master.cf file). This +# directory must be owned by root. +# +daemon_directory = //usr/lib64/postfix + +# The data_directory parameter specifies the location of Postfix-writable +# data files (caches, random numbers). This directory must be owned +# by the mail_owner account (see below). +# +data_directory = /var/lib/postfix + +# QUEUE AND PROCESS OWNERSHIP +# +# The mail_owner parameter specifies the owner of the Postfix queue +# and of most Postfix daemon processes. Specify the name of a user +# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS +# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In +# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED +# USER. +# +mail_owner = postfix + +# The default_privs parameter specifies the default rights used by +# the local delivery agent for delivery to external file or command. +# These rights are used in the absence of a recipient user context. +# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. +# +#default_privs = nobody + +# INTERNET HOST AND DOMAIN NAMES +# +# The myhostname parameter specifies the internet hostname of this +# mail system. The default is to use the fully-qualified domain name +# from gethostname(). $myhostname is used as a default value for many +# other configuration parameters. +# +#myhostname = host.domain.tld +#myhostname = virtual.domain.tld + +# The mydomain parameter specifies the local internet domain name. +# The default is to use $myhostname minus the first component. +# $mydomain is used as a default value for many other configuration +# parameters. +# +#mydomain = domain.tld + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user@that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +#myorigin = $myhostname +#myorigin = $mydomain + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user@[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +#inet_interfaces = all +#inet_interfaces = $myhostname +#inet_interfaces = $myhostname, localhost + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain. On a mail domain +# gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user@[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +#mydestination = $myhostname, localhost.$mydomain, localhost +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, +# mail.$mydomain, www.$mydomain, ftp.$mydomain + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user@domain.tld address. +# +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +#local_recipient_maps = + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +unknown_local_recipient_reject_code = 550 + +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = subnet), Postfix "trusts" SMTP +# clients in the same IP subnetworks as the local machine. +# On Linux, this does works correctly only with interfaces specified +# with the "ifconfig" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.189.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_recipient_restrictions description in +# postconf(5) for detailed information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is $mydestination. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = $mydestination + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +#relayhost = $mydomain +#relayhost = [gateway.my.domain] +#relayhost = [mailserver.isp.tld] +#relayhost = uucphost +#relayhost = [an.ip.add.ress] + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user@domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +#alias_maps = dbm:/etc/aliases +#alias_maps = hash:/etc/aliases +#alias_maps = hash:/etc/aliases, nis:mail.aliases +#alias_maps = netinfo:/aliases + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +#alias_database = dbm:/etc/aliases +#alias_database = dbm:/etc/mail/aliases +#alias_database = hash:/etc/aliases +#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +#recipient_delimiter = + + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /some/where/procmail +#mailbox_command = /some/where/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#mailbox_transport = lmtp:unix:/file/name +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/file/name +#fallback_transport = cyrus +#fallback_transport = + +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user@other.host +#luser_relay = $local@other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +#header_checks = regexp:/etc/postfix/header_checks + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +#local_destination_concurrency_limit = 2 +#default_destination_concurrency_limit = 20 + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +debugger_command = + PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin + ddd $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen sesssion, su root and run "screen -r +# " where uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = /usr/sbin/sendmail + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = /usr/bin/newaliases + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = /usr/bin/mailq + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = postdrop + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = /usr/share/doc/postfix-2.8.9/html + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = /usr/share/man + +# sample_directory: The location of the Postfix sample configuration files. +# This parameter is obsolete as of Postfix 2.1. +# +sample_directory = /etc/postfix + +# readme_directory: The location of the Postfix README files. +# +readme_directory = /usr/share/doc/postfix-2.8.9/readme +home_mailbox = .maildir/ +#alias_maps = mysql:/etc/postfix/mysql-aliases.cf +alias_maps = hash:/etc/postfix/maps/aliases +anvil_status_update_time = 3600s +body_checks = pcre:/etc/postfix/maps/body_checks +bounce_template_file = /etc/postfix/bounce-templates/bounce.de-DE.cf +broken_sasl_auth_clients = yes +#canonical_maps = mysql:/etc/postfix/mysql-canonical.cf +canonical_maps = hash:/etc/postfix/maps/canonical +cyrus_sasl_config_path = /etc/sasl2 +default_destination_concurrency_limit = 5 +header_checks = pcre:/etc/postfix/maps/header_checks +inet_protocols = all +local_recipient_maps = $alias_maps $virtual_mailbox_maps unix:passwd.byname +mail_spool_directory = /var/spool/mail +mailbox_size_limit = 512000000 +message_size_limit = 51200000 +#mydestination = $myhostname, $mydomain, mysql:/etc/postfix/mysql-mydomains.cf +mydestination = $myhostname, $mydomain, hash:/etc/postfix/maps/mydomains +mydomain = brehm-online.com +myhostname = helga.brehm-online.com +mynetworks = 127.0.0.0/8 85.214.134.152/32 85.214.109.1/32 [::1]/128 [2a01:238:4225:6e00:8f8c:808a:7fb8:88df]/128 +mynetworks_style = host +myorigin = $mydomain +#recipient_bcc_maps = mysql:/etc/postfix/mysql-recipient_bcc.cf +recipient_bcc_maps = hash:/etc/postfix/maps/recipient_bcc +#relay_clientcerts = hash:/etc/postfix/relay_clientcerts +relay_clientcerts = hash:/etc/postfix/maps/relay_clientcerts +#relay_domains = mysql:/etc/postfix/mysql-relay-domains.cf +relay_domains = hash:/etc/postfix/maps/relay_domains +#relocated_maps = mysql:/etc/postfix/mysql-relocated.cf +relocated_maps = hash:/etc/postfix/maps/relocated +#sender_bcc_maps = mysql:/etc/postfix/mysql-sender_bcc.cf +sender_bcc_maps = hash:/etc/postfix/maps/sender_bcc +smtp_generic_maps = hash:/etc/postfix/maps/generic +smtp_tls_CAfile = /etc/ssl/CA-Brehm/cacert.pem +smtp_tls_cert_file = /etc/postfix/postfix.pem +smtp_tls_enforce_peername = no +smtp_use_tls = yes +smtpd_banner = $myhostname ESMTP Frank Brehms Mail Service $mail_name ($mail_version) + +smtpd_recipient_restrictions = + check_client_access cidr:/etc/postfix/maps/access_client, + check_recipient_access hash:/etc/postfix/maps/access_recipient, + check_helo_access hash:/etc/postfix/maps/access_helo, + check_sender_access hash:/etc/postfix/maps/access_sender, + reject_non_fqdn_recipient, + reject_unknown_recipient_domain, + reject_non_fqdn_sender, + reject_unknown_sender_domain, + reject_invalid_helo_hostname, + permit_mynetworks, + permit_sasl_authenticated, + permit_tls_clientcerts, + reject_rbl_client zen.spamhaus.org, + reject_rbl_client ix.dnsbl.manitu.net, + check_policy_service unix:private/postgrey, + check_policy_service inet:127.0.0.1:12525, + reject_unverified_recipient, + permit_mx_backup, + reject_unauth_destination, + permit + +smtpd_sasl_auth_enable = yes +smtpd_tls_CAfile = $smtp_tls_CAfile +smtpd_tls_cert_file = $smtp_tls_cert_file +smtpd_tls_key_file = $smtp_tls_cert_file +smtpd_tls_loglevel = 1 +smtpd_tls_received_header = yes +smtpd_use_tls = yes +transport_maps = hash:/etc/postfix/maps/transport +#virtual_alias_domains = mysql:/etc/postfix/mysql-virtual-alias-domains.cf +virtual_alias_domains = hash:/etc/postfix/maps/virtual_alias_domains +#virtual_alias_maps = mysql:/etc/postfix/mysql-virtual.cf +virtual_alias_maps = hash:/etc/postfix/maps/virtual_alias_maps +virtual_gid_maps = static:1023 +virtual_mailbox_base = / +#virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf +virtual_mailbox_domains = hash:/etc/postfix/maps/virtual_mailbox_domains +virtual_mailbox_limit = 512000000 +#virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-maps.cf +virtual_mailbox_maps = hash:/etc/postfix/maps/virtual_mailbox_maps +virtual_uid_maps = static:1023 diff --git a/config-archive/etc/postfix/main.cf.dist b/config-archive/etc/postfix/main.cf.dist index f608dfb..a7c3834 100644 --- a/config-archive/etc/postfix/main.cf.dist +++ b/config-archive/etc/postfix/main.cf.dist @@ -640,7 +640,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.9.3/html +html_directory = /usr/share/doc/postfix-2.9.4/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -653,5 +653,5 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.9.3/readme +readme_directory = /usr/share/doc/postfix-2.9.4/readme home_mailbox = .maildir/ diff --git a/config-archive/etc/screenrc b/config-archive/etc/screenrc new file mode 100644 index 0000000..2423949 --- /dev/null +++ b/config-archive/etc/screenrc @@ -0,0 +1,357 @@ +# Copyright 1999-2011 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# +# /etc/screenrc +# +# This is the system wide screenrc. +# +# You can use this file to change the default behavior of screen system wide +# or copy it to ~/.screenrc and use it as a starting point for your own +# settings. +# +# Commands in this file are used to set options, bind screen functions to +# keys, redefine terminal capabilities, and to automatically establish one or +# more windows at the beginning of your screen session. +# +# This is not a comprehensive list of options, look at the screen manual for +# details on everything that you can put in this file. +# +# + +# ============================================================================== +# SCREEN SETTINGS +# ============================================================================== + +# ESCAPE - the COMMAND CHARACTER +# =============================================================== +# escape ^aa # default +# escape ^^^^ # suggested binding (Control-^) for Emacs users + + +# PASSWORD +# =============================================================== +# This commands sets the *internal* password for the screen session. +# WARNING!! If this is set then a "lock" command will only let you in to the +# session after you enter the user's account password and then *also* +# the internal password for that session. This gives additional safety but, +# if you forget the internal password then you cannot resume your session. +# Use :password to generate a password +# password ODSJQf.4IJN7E # "1234" + + +# VARIABLES +# =============================================================== +# No annoying audible bell, using "visual bell" +# vbell on # default: off +# vbell_msg " -- Bell,Bell!! -- " # default: "Wuff,Wuff!!" + +# Automatically detach on hangup. + autodetach on # default: on + +# Don't display the copyright page + startup_message off # default: on + +# Uses nethack-style messages +# nethack on # default: off + +# Affects the copying of text regions + crlf off # default: off + +# Enable/disable multiuser mode. Standard screen operation is singleuser. +# In multiuser mode the commands acladd, aclchg, aclgrp and acldel can be used +# to enable (and disable) other user accessing this screen session. +# Requires suid-root. + multiuser off + +# Change default scrollback value for new windows + defscrollback 5000 # default: 100 + +# Define the time that all windows monitored for silence should +# wait before displaying a message. Default 30 seconds. + silencewait 15 # default: 30 + +# bufferfile: The file to use for commands +# "readbuf" ('<') and "writebuf" ('>'): + bufferfile $HOME/.screen_exchange +# +# hardcopydir: The directory which contains all hardcopies. +# hardcopydir ~/.hardcopy +# hardcopydir ~/.screen +# +# shell: Default process started in screen's windows. +# Makes it possible to use a different shell inside screen +# than is set as the default login shell. +# If begins with a '-' character, the shell will be started as a login shell. +# shell zsh +# shell bash +# shell ksh + shell -$SHELL + +# shellaka '> |tcsh' +# shelltitle '$ |bash' + +# emulate .logout message + pow_detach_msg "Screen session of \$LOGNAME \$:cr:\$:nl:ended." + +# caption always " %w --- %c:%s" +# caption always "%3n %t%? @%u%?%? [%h]%?%=%c" + caption always " %{gw}$LOGNAME@%H | %{bw}%c%{-} | %{kw}%-Lw%{rw}%50>%{rW}%n%f* %t %{kw}%+LW%<" + +# advertise hardstatus support to $TERMCAP +# termcapinfo * '' 'hs:ts=\E_:fs=\E\\:ds=\E_\E\\' + +# set every new windows hardstatus line to somenthing descriptive +# defhstatus "screen: ^En (^Et)" + +# don't kill window after the process died +# zombie "^[" + +# ignore displays that block on output +defnonblock on + +# XTERM TWEAKS +# =============================================================== + +# xterm understands both im/ic and doesn't have a status line. +# Note: Do not specify im and ic in the real termcap/info file as +# some programs (e.g. vi) will not work anymore. + termcap xterm hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l + terminfo xterm hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l + +# 80/132 column switching must be enabled for ^AW to work +# change init sequence to not switch width + termcapinfo xterm Z0=\E[?3h:Z1=\E[?3l:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l + +# Make the output buffer large for (fast) xterms. +# termcapinfo xterm* OL=10000 + termcapinfo xterm* OL=100 + +# tell screen that xterm can switch to dark background and has function +# keys. + termcapinfo xterm 'VR=\E[?5h:VN=\E[?5l' + termcapinfo xterm 'k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~' + termcapinfo xterm 'kh=\EOH:kI=\E[2~:kD=\E[3~:kH=\EOF:kP=\E[5~:kN=\E[6~' + +# special xterm hardstatus: use the window title. + termcapinfo xterm 'hs:ts=\E]2;:fs=\007:ds=\E]2;screen\007' + +#terminfo xterm 'vb=\E[?5h$<200/>\E[?5l' + termcapinfo xterm 'vi=\E[?25l:ve=\E[34h\E[?25h:vs=\E[34l' + +# emulate part of the 'K' charset + termcapinfo xterm 'XC=K%,%\E(B,[\304,\\\\\326,]\334,{\344,|\366,}\374,~\337' + +# xterm-52 tweaks: +# - uses background color for delete operations + termcapinfo xterm* be + +# Do not use xterm's alternative window buffer, it breaks scrollback (see bug #61195) + termcapinfo xterm|xterms|xs ti@:te=\E[2J + +# WYSE TERMINALS +# =============================================================== + +#wyse-75-42 must have flow control (xo = "terminal uses xon/xoff") +#essential to have it here, as this is a slow terminal. + termcapinfo wy75-42 xo:hs@ + +# New termcap sequences for cursor application mode. + termcapinfo wy* CS=\E[?1h:CE=\E[?1l:vi=\E[?25l:ve=\E[?25h:VR=\E[?5h:VN=\E[?5l:cb=\E[1K:CD=\E[1J + + +# OTHER TERMINALS +# =============================================================== + +# make hp700 termcap/info better + termcapinfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@' + +# Extend the vt100 desciption by some sequences. + termcap vt100* ms:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC + terminfo vt100* ms:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC + termcapinfo linux C8 +# old rxvt versions also need this +# termcapinfo rxvt C8 + + +# KEYBINDINGS +# ============================================================== +# The "bind" command assign keys to (internal) commands +# SCREEN checks all the keys you type; you type the key +# which is known as the "command character" then SCREEN +# eats this key, too, and checks whether this key is +# "bound" to a command. If so then SCREEN will execute it. +# +# The command "bind" allows you to chose which keys +# will be assigned to the commands. +# +# Some commands are bound to several keys - +# usually to both some letter and its corresponding +# control key combination, eg the command +# "(create) screen" is bound to both 'c' and '^C'. +# +# The following list shows the default bindings: +# +# break ^B b +# clear C +# colon : +# copy ^[ [ +# detach ^D d +# digraph ^V +# displays * +# dumptermcap . +# fit F +# flow ^F f +# focus ^I +# hardcopy h +# help ? +# history { } +# info i +# kill K k +# lastmsg ^M m +# license , +# log H +# login L +# meta x +# monitor M +# next ^@ ^N sp n +# number N +# only Q +# other ^X +# pow_break B +# pow_detach D +# prev ^H ^P p ^? +# quit \ +# readbuf < +# redisplay ^L l +# remove X +# removebuf = +# reset Z +# screen ^C c +# select " ' +# silence _ +# split S +# suspend ^Z z +# time ^T t +# title A +# vbell ^G +# version v +# width W +# windows ^W w +# wrap ^R r +# writebuf > +# xoff ^S s +# xon ^Q q +# ^] paste . +# - select - +# 0 select 0 +# 1 select 1 +# 2 select 2 +# 3 select 3 +# 4 select 4 +# 5 select 5 +# 6 select 6 +# 7 select 7 +# 8 select 8 +# 9 select 9 +# I login on +# O login off +# ] paste . +# + +# And here are the default bind commands if you need them: +# +# bind A title +# bind C clear +# bind D pow_detach +# bind F fit +# bind H log +# bind I login on +# bind K kill +# bind L login +# bind M monitor +# bind N number +# bind O login off +# bind Q only +# bind S split +# bind W width +# bind X remove +# bind Z reset + +# Let's remove some dangerous key bindings ... + bind k + bind ^k +# bind . dumptermcap # default + bind . +# bind ^\ quit # default + bind ^\ +# bind \\ quit # default + bind \\ +# bind ^h ??? # default + bind ^h +# bind h hardcopy # default + bind h + +# ... and make them better. + bind 'K' kill + bind 'I' login on + bind 'O' login off + bind '}' history + +# Yet another hack: +# Prepend/append register [/] to the paste if ^a^] is pressed. +# This lets me have autoindent mode in vi. + register [ "\033:se noai\015a" + register ] "\033:se ai\015a" + bind ^] paste [.] + + +# hardstatus alwaysignore +# hardstatus alwayslastline "%Lw" + +# Resize the current region. The space will be removed from or added to +# the region below or if there's not enough space from the region above. + bind = resize = + bind + resize +3 + bind - resize -3 +# bind _ resize max +# +# attrcolor u "-u b" +# attrcolor b "R" + +# STARTUP SCREENS +# =============================================================== +# Defines the time screen delays a new message when one message +# is currently displayed. The default is 1 second. +# msgminwait 2 + +# Time a message is displayed if screen is not disturbed by +# other activity. The dafault is 5 seconds: +# msgwait 2 + +# Briefly show the version number of this starting +# screen session - but only for *one* second: +# msgwait 1 +# version + +# Welcome the user: +# echo "welcome :-)" +# echo "I love you today." + +# Uncomment one/some following lines to automatically let +# SCREEN start some programs in the given window numbers: +# screen -t MAIL 0 mutt +# screen -t EDIT 1 vim +# screen -t GOOGLE 2 links http://www.google.com +# screen -t NEWS 3 slrn +# screen -t WWW 4 links http://www.math.fu-berlin.de/~guckes/ +# screen 5 +# screen 6 + +# Set the environment variable var to value string. If only var is specified, +# you'll be prompted to enter a value. If no parameters are specified, +# you'll be prompted for both variable and value. The environment is +# inherited by all subsequently forked shells. +# setenv PROMPT_COMMAND 'echo -n -e "\033k\033\134"' + +# Don't you want to start programs which need a DISPLAY ? +# setenv DISPLAY '' diff --git a/config-archive/etc/screenrc.dist.new b/config-archive/etc/screenrc.dist.new new file mode 100644 index 0000000..02e63bf --- /dev/null +++ b/config-archive/etc/screenrc.dist.new @@ -0,0 +1,356 @@ +# Copyright 1999-2011 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# +# /etc/screenrc +# +# This is the system wide screenrc. +# +# You can use this file to change the default behavior of screen system wide +# or copy it to ~/.screenrc and use it as a starting point for your own +# settings. +# +# Commands in this file are used to set options, bind screen functions to +# keys, redefine terminal capabilities, and to automatically establish one or +# more windows at the beginning of your screen session. +# +# This is not a comprehensive list of options, look at the screen manual for +# details on everything that you can put in this file. +# +# + +# ============================================================================== +# SCREEN SETTINGS +# ============================================================================== + +# ESCAPE - the COMMAND CHARACTER +# =============================================================== +# escape ^aa # default +# escape ^^^^ # suggested binding (Control-^) for Emacs users + + +# PASSWORD +# =============================================================== +# This commands sets the *internal* password for the screen session. +# WARNING!! If this is set then a "lock" command will only let you in to the +# session after you enter the user's account password and then *also* +# the internal password for that session. This gives additional safety but, +# if you forget the internal password then you cannot resume your session. +# Use :password to generate a password +# password ODSJQf.4IJN7E # "1234" + + +# VARIABLES +# =============================================================== +# No annoying audible bell, using "visual bell" +# vbell on # default: off +# vbell_msg " -- Bell,Bell!! -- " # default: "Wuff,Wuff!!" + +# Automatically detach on hangup. + autodetach on # default: on + +# Don't display the copyright page + startup_message off # default: on + +# Uses nethack-style messages +# nethack on # default: off + +# Affects the copying of text regions + crlf off # default: off + +# Enable/disable multiuser mode. Standard screen operation is singleuser. +# In multiuser mode the commands acladd, aclchg, aclgrp and acldel can be used +# to enable (and disable) other user accessing this screen session. +# Requires suid-root. + multiuser off + +# Change default scrollback value for new windows + defscrollback 1000 # default: 100 + +# Define the time that all windows monitored for silence should +# wait before displaying a message. Default 30 seconds. + silencewait 15 # default: 30 + +# bufferfile: The file to use for commands +# "readbuf" ('<') and "writebuf" ('>'): + bufferfile $HOME/.screen_exchange +# +# hardcopydir: The directory which contains all hardcopies. +# hardcopydir ~/.hardcopy +# hardcopydir ~/.screen +# +# shell: Default process started in screen's windows. +# Makes it possible to use a different shell inside screen +# than is set as the default login shell. +# If begins with a '-' character, the shell will be started as a login shell. +# shell zsh +# shell bash +# shell ksh + shell -$SHELL + +# shellaka '> |tcsh' +# shelltitle '$ |bash' + +# emulate .logout message + pow_detach_msg "Screen session of \$LOGNAME \$:cr:\$:nl:ended." + +# caption always " %w --- %c:%s" +# caption always "%3n %t%? @%u%?%? [%h]%?%=%c" + +# advertise hardstatus support to $TERMCAP +# termcapinfo * '' 'hs:ts=\E_:fs=\E\\:ds=\E_\E\\' + +# set every new windows hardstatus line to somenthing descriptive +# defhstatus "screen: ^En (^Et)" + +# don't kill window after the process died +# zombie "^[" + +# ignore displays that block on output +defnonblock on + +# XTERM TWEAKS +# =============================================================== + +# xterm understands both im/ic and doesn't have a status line. +# Note: Do not specify im and ic in the real termcap/info file as +# some programs (e.g. vi) will not work anymore. + termcap xterm hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l + terminfo xterm hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l + +# 80/132 column switching must be enabled for ^AW to work +# change init sequence to not switch width + termcapinfo xterm Z0=\E[?3h:Z1=\E[?3l:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l + +# Make the output buffer large for (fast) xterms. +# termcapinfo xterm* OL=10000 + termcapinfo xterm* OL=100 + +# tell screen that xterm can switch to dark background and has function +# keys. + termcapinfo xterm 'VR=\E[?5h:VN=\E[?5l' + termcapinfo xterm 'k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~' + termcapinfo xterm 'kh=\EOH:kI=\E[2~:kD=\E[3~:kH=\EOF:kP=\E[5~:kN=\E[6~' + +# special xterm hardstatus: use the window title. + termcapinfo xterm 'hs:ts=\E]2;:fs=\007:ds=\E]2;screen\007' + +#terminfo xterm 'vb=\E[?5h$<200/>\E[?5l' + termcapinfo xterm 'vi=\E[?25l:ve=\E[34h\E[?25h:vs=\E[34l' + +# emulate part of the 'K' charset + termcapinfo xterm 'XC=K%,%\E(B,[\304,\\\\\326,]\334,{\344,|\366,}\374,~\337' + +# xterm-52 tweaks: +# - uses background color for delete operations + termcapinfo xterm* be + +# Do not use xterm's alternative window buffer, it breaks scrollback (see bug #61195) + termcapinfo xterm|xterms|xs ti@:te=\E[2J + +# WYSE TERMINALS +# =============================================================== + +#wyse-75-42 must have flow control (xo = "terminal uses xon/xoff") +#essential to have it here, as this is a slow terminal. + termcapinfo wy75-42 xo:hs@ + +# New termcap sequences for cursor application mode. + termcapinfo wy* CS=\E[?1h:CE=\E[?1l:vi=\E[?25l:ve=\E[?25h:VR=\E[?5h:VN=\E[?5l:cb=\E[1K:CD=\E[1J + + +# OTHER TERMINALS +# =============================================================== + +# make hp700 termcap/info better + termcapinfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@' + +# Extend the vt100 desciption by some sequences. + termcap vt100* ms:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC + terminfo vt100* ms:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC + termcapinfo linux C8 +# old rxvt versions also need this +# termcapinfo rxvt C8 + + +# KEYBINDINGS +# ============================================================== +# The "bind" command assign keys to (internal) commands +# SCREEN checks all the keys you type; you type the key +# which is known as the "command character" then SCREEN +# eats this key, too, and checks whether this key is +# "bound" to a command. If so then SCREEN will execute it. +# +# The command "bind" allows you to chose which keys +# will be assigned to the commands. +# +# Some commands are bound to several keys - +# usually to both some letter and its corresponding +# control key combination, eg the command +# "(create) screen" is bound to both 'c' and '^C'. +# +# The following list shows the default bindings: +# +# break ^B b +# clear C +# colon : +# copy ^[ [ +# detach ^D d +# digraph ^V +# displays * +# dumptermcap . +# fit F +# flow ^F f +# focus ^I +# hardcopy h +# help ? +# history { } +# info i +# kill K k +# lastmsg ^M m +# license , +# log H +# login L +# meta x +# monitor M +# next ^@ ^N sp n +# number N +# only Q +# other ^X +# pow_break B +# pow_detach D +# prev ^H ^P p ^? +# quit \ +# readbuf < +# redisplay ^L l +# remove X +# removebuf = +# reset Z +# screen ^C c +# select " ' +# silence _ +# split S +# suspend ^Z z +# time ^T t +# title A +# vbell ^G +# version v +# width W +# windows ^W w +# wrap ^R r +# writebuf > +# xoff ^S s +# xon ^Q q +# ^] paste . +# - select - +# 0 select 0 +# 1 select 1 +# 2 select 2 +# 3 select 3 +# 4 select 4 +# 5 select 5 +# 6 select 6 +# 7 select 7 +# 8 select 8 +# 9 select 9 +# I login on +# O login off +# ] paste . +# + +# And here are the default bind commands if you need them: +# +# bind A title +# bind C clear +# bind D pow_detach +# bind F fit +# bind H log +# bind I login on +# bind K kill +# bind L login +# bind M monitor +# bind N number +# bind O login off +# bind Q only +# bind S split +# bind W width +# bind X remove +# bind Z reset + +# Let's remove some dangerous key bindings ... + bind k + bind ^k +# bind . dumptermcap # default + bind . +# bind ^\ quit # default + bind ^\ +# bind \\ quit # default + bind \\ +# bind ^h ??? # default + bind ^h +# bind h hardcopy # default + bind h + +# ... and make them better. + bind 'K' kill + bind 'I' login on + bind 'O' login off + bind '}' history + +# Yet another hack: +# Prepend/append register [/] to the paste if ^a^] is pressed. +# This lets me have autoindent mode in vi. + register [ "\033:se noai\015a" + register ] "\033:se ai\015a" + bind ^] paste [.] + + +# hardstatus alwaysignore +# hardstatus alwayslastline "%Lw" + +# Resize the current region. The space will be removed from or added to +# the region below or if there's not enough space from the region above. + bind = resize = + bind + resize +3 + bind - resize -3 +# bind _ resize max +# +# attrcolor u "-u b" +# attrcolor b "R" + +# STARTUP SCREENS +# =============================================================== +# Defines the time screen delays a new message when one message +# is currently displayed. The default is 1 second. +# msgminwait 2 + +# Time a message is displayed if screen is not disturbed by +# other activity. The dafault is 5 seconds: +# msgwait 2 + +# Briefly show the version number of this starting +# screen session - but only for *one* second: +# msgwait 1 +# version + +# Welcome the user: +# echo "welcome :-)" +# echo "I love you today." + +# Uncomment one/some following lines to automatically let +# SCREEN start some programs in the given window numbers: +# screen -t MAIL 0 mutt +# screen -t EDIT 1 vim +# screen -t GOOGLE 2 links http://www.google.com +# screen -t NEWS 3 slrn +# screen -t WWW 4 links http://www.math.fu-berlin.de/~guckes/ +# screen 5 +# screen 6 + +# Set the environment variable var to value string. If only var is specified, +# you'll be prompted to enter a value. If no parameters are specified, +# you'll be prompted for both variable and value. The environment is +# inherited by all subsequently forked shells. +# setenv PROMPT_COMMAND 'echo -n -e "\033k\033\134"' + +# Don't you want to start programs which need a DISPLAY ? +# setenv DISPLAY '' diff --git a/init.d/dhcpcd b/init.d/dhcpcd index 5d350c0..d88b061 100755 --- a/init.d/dhcpcd +++ b/init.d/dhcpcd @@ -1,5 +1,5 @@ #!/sbin/runscript -# Copyright 1999-2011 Roy Marples +# Copyright 2007-2008 Roy Marples # All rights reserved. Released under the 2-clause BSD license. command=/sbin/dhcpcd @@ -9,19 +9,9 @@ name="DHCP Client Daemon" depend() { - if [ "${RC_VERSION:-0}" != "0" ]; then - provide net - need localmount - use logger network - after bootmisc modules - before dns - fi + provide net + need localmount + use logger network + after bootmisc modules + before dns } - -if [ "${RC_VERSION:-0}" = "0" ]; then - start() - { - eerror "This script cannot be used for baselayout-1." - return 1 - } -fi diff --git a/postfix/main.cf b/postfix/main.cf index 044fe07..e911f61 100644 --- a/postfix/main.cf +++ b/postfix/main.cf @@ -642,7 +642,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.9.3/html +html_directory = /usr/share/doc/postfix-2.9.4/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -655,7 +655,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.9.3/readme +readme_directory = /usr/share/doc/postfix-2.9.4/readme home_mailbox = .maildir/ #alias_maps = mysql:/etc/postfix/mysql-aliases.cf alias_maps = hash:/etc/postfix/maps/aliases diff --git a/rkhunter.conf b/rkhunter.conf index 040cc2a..b8a2616 100644 --- a/rkhunter.conf +++ b/rkhunter.conf @@ -26,6 +26,12 @@ # wildcard characters (globbing) are allowed in the list, then the # text describing the option will say so. # +# Space-separated lists may be enclosed by quotes, but these must only +# appear at the start and end of the list, not in the middle. +# +# For example: XXX="abc def gh" (correct) +# XXX="abc" "def" "gh" (incorrect) +# INSTALLDIR=/usr @@ -106,11 +112,6 @@ DBDIR=/var/lib/rkhunter/db # SCRIPTDIR=/usr/lib/rkhunter/scripts -# -# Specify the root directory to use. -# -#ROOTDIR="" - # # This option can be used to modify the command directory list used # by rkhunter to locate commands (that is, its PATH). By default @@ -376,7 +377,8 @@ DISABLE_TESTS="suspscan hidden_ports hidden_procs deleted_files packet_cap_apps" # # This option is a space-separated list of commands, directories and file -# pathnames. This option can be specified more than once. +# pathnames which will be included in the file properties checks. +# This option can be specified more than once. # # Whenever this option is changed, 'rkhunter --propupd' must be run. # @@ -530,11 +532,12 @@ IMMUTABLE_SET=0 # ALLOWPROCDELFILE="/usr/libexec/gconfd-2:/tmp/abc:/var/tmp/xyz" # # This is a space-separated list of process names. The option -# may be specified more than once. +# may be specified more than once. The option may use wildcard +# characters, but only in the file names. # #ALLOWPROCDELFILE="/sbin/cardmgr /usr/sbin/gpm:/etc/X11/abc" #ALLOWPROCDELFILE="/usr/libexec/gconfd-2" -#ALLOWPROCDELFILE="/usr/sbin/mysqld" +#ALLOWPROCDELFILE="/usr/sbin/mysqld:/tmp/ib*" # # Allow the specified processes to listen on any network interface. @@ -824,7 +827,8 @@ SUSPSCAN_THRESH=200 # # The following option can be used to whitelist shared library files that would # normally be flagged with a warning during the preloaded shared library check. -# These library pathnames usually exist in the '/etc/ld.so.preload' file. +# These library pathnames usually exist in the '/etc/ld.so.preload' file or in +# the LD_PRELOAD environment variable. # # NOTE: It is recommended that if you whitelist any files, then you include # those files in the file properties check. See the USER_FILEPROP_FILES_DIRS @@ -945,7 +949,7 @@ SHOW_LOCK_MSGS=1 # # If the option SCANROOTKITMODE is set to "THOROUGH" the scanrootkit() function # will search (on a per rootkit basis) for filenames in all of the directories (as defined -# by the result of running 'find "${RKHROOTDIR}/" -xdev'). While still not optimal, as it +# by the result of running 'find / -xdev'). While still not optimal, as it # still searches for only file names as opposed to file contents, this is one step away # from the rigidity of searching in known (evidence) or default (installation) locations. # -- 2.39.5