From 8136fef22f511ca9cda0002e2b8cbd3d94357953 Mon Sep 17 00:00:00 2001 From: frank Date: Wed, 29 Feb 2012 21:32:21 +0100 Subject: [PATCH] saving uncommitted changes in /etc prior to emerge run --- config-archive/etc/pulse/client.conf | 33 ++++++++ .../etc/pulse/client.conf.dist | 0 config-archive/etc/pulse/daemon.conf | 81 +++++++++++++++++++ .../etc/pulse/daemon.conf.dist | 0 config-archive/etc/pulse/default.pa | 2 +- .../etc/pulse/default.pa.1 | 43 +++------- config-archive/etc/pulse/default.pa.dist | 41 +++++++--- config-archive/etc/pulse/system.pa | 55 +++++++++++++ .../etc/pulse/system.pa.dist | 0 .../etc/xdg/autostart/pulseaudio.desktop | 12 +++ .../etc/xdg/autostart/pulseaudio.desktop.dist | 0 cups/printers.conf | 2 +- cups/printers.conf.O | 2 +- pulse/client.conf | 6 +- pulse/daemon.conf | 9 ++- pulse/default.pa | 41 +++++++--- pulse/system.pa | 17 ++-- xdg/autostart/pulseaudio.desktop | 2 + 18 files changed, 283 insertions(+), 63 deletions(-) create mode 100644 config-archive/etc/pulse/client.conf rename pulse/._cfg0000_client.conf => config-archive/etc/pulse/client.conf.dist (100%) create mode 100644 config-archive/etc/pulse/daemon.conf rename pulse/._cfg0000_daemon.conf => config-archive/etc/pulse/daemon.conf.dist (100%) rename pulse/._cfg0000_default.pa => config-archive/etc/pulse/default.pa.1 (77%) create mode 100644 config-archive/etc/pulse/system.pa rename pulse/._cfg0000_system.pa => config-archive/etc/pulse/system.pa.dist (100%) create mode 100644 config-archive/etc/xdg/autostart/pulseaudio.desktop rename xdg/autostart/._cfg0000_pulseaudio.desktop => config-archive/etc/xdg/autostart/pulseaudio.desktop.dist (100%) diff --git a/config-archive/etc/pulse/client.conf b/config-archive/etc/pulse/client.conf new file mode 100644 index 00000000..b3738abf --- /dev/null +++ b/config-archive/etc/pulse/client.conf @@ -0,0 +1,33 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA. + +## Configuration file for PulseAudio clients. See pulse-client.conf(5) for +## more information. Default values a commented out. Use either ; or # for +## commenting. + +; default-sink = +; default-source = +; default-server = + +; autospawn = yes +; daemon-binary = /usr/bin/pulseaudio +; extra-arguments = --log-target=syslog + +; cookie-file = + +; enable-shm = yes +; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB diff --git a/pulse/._cfg0000_client.conf b/config-archive/etc/pulse/client.conf.dist similarity index 100% rename from pulse/._cfg0000_client.conf rename to config-archive/etc/pulse/client.conf.dist diff --git a/config-archive/etc/pulse/daemon.conf b/config-archive/etc/pulse/daemon.conf new file mode 100644 index 00000000..e058f497 --- /dev/null +++ b/config-archive/etc/pulse/daemon.conf @@ -0,0 +1,81 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA. + +## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for +## more information. Default values a commented out. Use either ; or # for +## commenting. + +; daemonize = no +; fail = yes +; allow-module-loading = yes +; allow-exit = yes +; use-pid-file = yes +; system-instance = no +; enable-shm = yes +; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB +; lock-memory = no +; cpu-limit = no + +; high-priority = yes +; nice-level = -11 + +; realtime-scheduling = yes +; realtime-priority = 5 + +; exit-idle-time = 20 +; scache-idle-time = 20 + +; dl-search-path = (depends on architecture) + +; load-default-script-file = yes +; default-script-file = + +; log-target = auto +; log-level = notice +; log-meta = no +; log-time = no +; log-backtrace = 0 + +; resample-method = speex-float-3 +; enable-remixing = yes +; enable-lfe-remixing = no + +; flat-volumes = yes + +; rlimit-fsize = -1 +; rlimit-data = -1 +; rlimit-stack = -1 +; rlimit-core = -1 +; rlimit-as = -1 +; rlimit-rss = -1 +; rlimit-nproc = -1 +; rlimit-nofile = 256 +; rlimit-memlock = -1 +; rlimit-locks = -1 +; rlimit-sigpending = -1 +; rlimit-msgqueue = -1 +; rlimit-nice = 31 +; rlimit-rtprio = 9 +; rlimit-rttime = 1000000 + +; default-sample-format = s16le +; default-sample-rate = 44100 +; default-sample-channels = 2 +; default-channel-map = front-left,front-right + +; default-fragments = 4 +; default-fragment-size-msec = 25 diff --git a/pulse/._cfg0000_daemon.conf b/config-archive/etc/pulse/daemon.conf.dist similarity index 100% rename from pulse/._cfg0000_daemon.conf rename to config-archive/etc/pulse/daemon.conf.dist diff --git a/config-archive/etc/pulse/default.pa b/config-archive/etc/pulse/default.pa index 33179fd6..ea8956e2 100644 --- a/config-archive/etc/pulse/default.pa +++ b/config-archive/etc/pulse/default.pa @@ -72,7 +72,7 @@ load-module module-native-protocol-unix ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp -#load-module module-zeroconf-publish +load-module module-zeroconf-publish ### Load the RTP reciever module (also configured via paprefs, see above) #load-module module-rtp-recv diff --git a/pulse/._cfg0000_default.pa b/config-archive/etc/pulse/default.pa.1 similarity index 77% rename from pulse/._cfg0000_default.pa rename to config-archive/etc/pulse/default.pa.1 index 79cf27b2..33179fd6 100644 --- a/pulse/._cfg0000_default.pa +++ b/config-archive/etc/pulse/default.pa.1 @@ -38,11 +38,13 @@ load-module module-card-restore ### stored in /usr/share/application load-module module-augment-properties -### Load audio drivers statically -### (it's probably better to not load these drivers manually, but instead -### use module-udev-detect -- see below -- for doing this automatically) +### Load audio drivers statically (it's probably better to not load +### these drivers manually, but instead use module-hal-detect -- +### see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 +#load-module module-oss device="/dev/dsp" sink_name=output source_name=input +#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink @@ -50,17 +52,11 @@ load-module module-augment-properties .ifexists module-udev-detect.so load-module module-udev-detect .else -### Use the static hardware detection module (for systems that lack udev/hal support) +### Alternatively use the static hardware detection module (for systems that +### lack udev support) load-module module-detect .endif -### Automatically connect sink and source if JACK server is present -.ifexists module-jackdbus-detect.so -.nofail -load-module module-jackdbus-detect -.fail -.endif - ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover @@ -76,13 +72,13 @@ load-module module-native-protocol-unix ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp -load-module module-zeroconf-publish +#load-module module-zeroconf-publish -### Load the RTP receiver module (also configured via paprefs, see above) +### Load the RTP reciever module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) -#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. @@ -94,10 +90,7 @@ load-module module-gconf .fail .endif -### Automatically restore the default sink/source when changed by the user -### during runtime -### NOTE: This should be loaded as early as possible so that subsequent modules -### that look up the default sink/source get the right value +### Automatically restore the default sink/source when changed by the user during runtime load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are @@ -115,9 +108,7 @@ load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. -.ifexists module-console-kit.so load-module module-console-kit -.endif ### Enable positioned event sounds load-module module-position-event-sounds @@ -125,18 +116,6 @@ load-module module-position-event-sounds ### Cork music streams when a phone stream is active load-module module-cork-music-on-phone -### Modules to allow autoloading of filters (such as echo cancellation) -### on demand. module-filter-heuristics tries to determine what filters -### make sense, and module-filter-apply does the heavy-lifting of -### loading modules and rerouting streams. -load-module module-filter-heuristics -load-module module-filter-apply - -### Load DBus protocol -.ifexists module-dbus-protocol.so -load-module module-dbus-protocol -.endif - # X11 modules should not be started from default.pa so that one daemon # can be shared by multiple sessions. diff --git a/config-archive/etc/pulse/default.pa.dist b/config-archive/etc/pulse/default.pa.dist index ea8956e2..79cf27b2 100644 --- a/config-archive/etc/pulse/default.pa.dist +++ b/config-archive/etc/pulse/default.pa.dist @@ -38,13 +38,11 @@ load-module module-card-restore ### stored in /usr/share/application load-module module-augment-properties -### Load audio drivers statically (it's probably better to not load -### these drivers manually, but instead use module-hal-detect -- -### see below -- for doing this automatically) +### Load audio drivers statically +### (it's probably better to not load these drivers manually, but instead +### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 -#load-module module-oss device="/dev/dsp" sink_name=output source_name=input -#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink @@ -52,11 +50,17 @@ load-module module-augment-properties .ifexists module-udev-detect.so load-module module-udev-detect .else -### Alternatively use the static hardware detection module (for systems that -### lack udev support) +### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect .endif +### Automatically connect sink and source if JACK server is present +.ifexists module-jackdbus-detect.so +.nofail +load-module module-jackdbus-detect +.fail +.endif + ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover @@ -74,11 +78,11 @@ load-module module-native-protocol-unix #load-module module-native-protocol-tcp load-module module-zeroconf-publish -### Load the RTP reciever module (also configured via paprefs, see above) +### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) -#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink" +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. @@ -90,7 +94,10 @@ load-module module-gconf .fail .endif -### Automatically restore the default sink/source when changed by the user during runtime +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are @@ -108,7 +115,9 @@ load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. +.ifexists module-console-kit.so load-module module-console-kit +.endif ### Enable positioned event sounds load-module module-position-event-sounds @@ -116,6 +125,18 @@ load-module module-position-event-sounds ### Cork music streams when a phone stream is active load-module module-cork-music-on-phone +### Modules to allow autoloading of filters (such as echo cancellation) +### on demand. module-filter-heuristics tries to determine what filters +### make sense, and module-filter-apply does the heavy-lifting of +### loading modules and rerouting streams. +load-module module-filter-heuristics +load-module module-filter-apply + +### Load DBus protocol +.ifexists module-dbus-protocol.so +load-module module-dbus-protocol +.endif + # X11 modules should not be started from default.pa so that one daemon # can be shared by multiple sessions. diff --git a/config-archive/etc/pulse/system.pa b/config-archive/etc/pulse/system.pa new file mode 100644 index 00000000..23a9857a --- /dev/null +++ b/config-archive/etc/pulse/system.pa @@ -0,0 +1,55 @@ +#!/usr/bin/pulseaudio -nF +# +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +# This startup script is used only if PulseAudio is started in system +# mode. + +### Automatically load driver modules depending on the hardware available +.ifexists module-hal-detect.so +load-module module-hal-detect +.else +### Alternatively use the static hardware detection module (for systems that +### lack HAL support) +load-module module-detect +.endif + +### Load several protocols +.ifexists module-esound-protocol-unix.so +load-module module-esound-protocol-unix +.endif +load-module module-native-protocol-unix + +### Automatically restore the volume of streams and devices +load-module module-stream-restore +load-module module-device-restore + +### Automatically restore the default sink/source when changed by the user during runtime +load-module module-default-device-restore + +### Automatically move streams to the default sink if the sink they are +### connected to dies, similar for sources +load-module module-rescue-streams + +### Make sure we always have a sink around, even if it is a null sink. +load-module module-always-sink + +### Automatically suspend sinks/sources that become idle for too long +load-module module-suspend-on-idle + +### Enable positioned event sounds +load-module module-position-event-sounds diff --git a/pulse/._cfg0000_system.pa b/config-archive/etc/pulse/system.pa.dist similarity index 100% rename from pulse/._cfg0000_system.pa rename to config-archive/etc/pulse/system.pa.dist diff --git a/config-archive/etc/xdg/autostart/pulseaudio.desktop b/config-archive/etc/xdg/autostart/pulseaudio.desktop new file mode 100644 index 00000000..a3d14fd2 --- /dev/null +++ b/config-archive/etc/xdg/autostart/pulseaudio.desktop @@ -0,0 +1,12 @@ +[Desktop Entry] +Version=1.0 +Encoding=UTF-8 +Name=PulseAudio Sound System +Name[de]=PulseAudio Sound System +Comment=Start the PulseAudio Sound System +Comment[de]=Das PulseAudio Sound System starten +Exec=start-pulseaudio-x11 +Terminal=false +Type=Application +Categories= +GenericName= diff --git a/xdg/autostart/._cfg0000_pulseaudio.desktop b/config-archive/etc/xdg/autostart/pulseaudio.desktop.dist similarity index 100% rename from xdg/autostart/._cfg0000_pulseaudio.desktop rename to config-archive/etc/xdg/autostart/pulseaudio.desktop.dist diff --git a/cups/printers.conf b/cups/printers.conf index c9666bc9..ed7dce88 100644 --- a/cups/printers.conf +++ b/cups/printers.conf @@ -1,5 +1,5 @@ # Printer configuration file for CUPS v1.4.8 -# Written by cupsd on 2012-02-29 08:18 +# Written by cupsd on 2012-02-29 20:16 # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING Info Kyocera FS-1020D diff --git a/cups/printers.conf.O b/cups/printers.conf.O index d1addb30..c9666bc9 100644 --- a/cups/printers.conf.O +++ b/cups/printers.conf.O @@ -1,5 +1,5 @@ # Printer configuration file for CUPS v1.4.8 -# Written by cupsd on 2012-02-28 07:05 +# Written by cupsd on 2012-02-29 08:18 # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING Info Kyocera FS-1020D diff --git a/pulse/client.conf b/pulse/client.conf index b3738abf..342395d5 100644 --- a/pulse/client.conf +++ b/pulse/client.conf @@ -16,12 +16,13 @@ # USA. ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for -## more information. Default values a commented out. Use either ; or # for +## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = +; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/bin/pulseaudio @@ -31,3 +32,6 @@ ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB + +; auto-connect-localhost = no +; auto-connect-display = no diff --git a/pulse/daemon.conf b/pulse/daemon.conf index e058f497..ac69dccb 100644 --- a/pulse/daemon.conf +++ b/pulse/daemon.conf @@ -16,7 +16,7 @@ # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for -## more information. Default values a commented out. Use either ; or # for +## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no @@ -25,6 +25,7 @@ ; allow-exit = yes ; use-pid-file = yes ; system-instance = no +; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no @@ -42,7 +43,7 @@ ; dl-search-path = (depends on architecture) ; load-default-script-file = yes -; default-script-file = +; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice @@ -79,3 +80,7 @@ ; default-fragments = 4 ; default-fragment-size-msec = 25 + +; enable-deferred-volume = yes +; deferred-volume-safety-margin-usec = 8000 +; deferred-volume-extra-delay-usec = 0 diff --git a/pulse/default.pa b/pulse/default.pa index ea8956e2..79cf27b2 100644 --- a/pulse/default.pa +++ b/pulse/default.pa @@ -38,13 +38,11 @@ load-module module-card-restore ### stored in /usr/share/application load-module module-augment-properties -### Load audio drivers statically (it's probably better to not load -### these drivers manually, but instead use module-hal-detect -- -### see below -- for doing this automatically) +### Load audio drivers statically +### (it's probably better to not load these drivers manually, but instead +### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 -#load-module module-oss device="/dev/dsp" sink_name=output source_name=input -#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink @@ -52,11 +50,17 @@ load-module module-augment-properties .ifexists module-udev-detect.so load-module module-udev-detect .else -### Alternatively use the static hardware detection module (for systems that -### lack udev support) +### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect .endif +### Automatically connect sink and source if JACK server is present +.ifexists module-jackdbus-detect.so +.nofail +load-module module-jackdbus-detect +.fail +.endif + ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover @@ -74,11 +78,11 @@ load-module module-native-protocol-unix #load-module module-native-protocol-tcp load-module module-zeroconf-publish -### Load the RTP reciever module (also configured via paprefs, see above) +### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) -#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink" +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. @@ -90,7 +94,10 @@ load-module module-gconf .fail .endif -### Automatically restore the default sink/source when changed by the user during runtime +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are @@ -108,7 +115,9 @@ load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. +.ifexists module-console-kit.so load-module module-console-kit +.endif ### Enable positioned event sounds load-module module-position-event-sounds @@ -116,6 +125,18 @@ load-module module-position-event-sounds ### Cork music streams when a phone stream is active load-module module-cork-music-on-phone +### Modules to allow autoloading of filters (such as echo cancellation) +### on demand. module-filter-heuristics tries to determine what filters +### make sense, and module-filter-apply does the heavy-lifting of +### loading modules and rerouting streams. +load-module module-filter-heuristics +load-module module-filter-apply + +### Load DBus protocol +.ifexists module-dbus-protocol.so +load-module module-dbus-protocol +.endif + # X11 modules should not be started from default.pa so that one daemon # can be shared by multiple sessions. diff --git a/pulse/system.pa b/pulse/system.pa index 23a9857a..e389e058 100644 --- a/pulse/system.pa +++ b/pulse/system.pa @@ -20,11 +20,10 @@ # mode. ### Automatically load driver modules depending on the hardware available -.ifexists module-hal-detect.so -load-module module-hal-detect +.ifexists module-udev-detect.so +load-module module-udev-detect .else -### Alternatively use the static hardware detection module (for systems that -### lack HAL support) +### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect .endif @@ -38,9 +37,17 @@ load-module module-native-protocol-unix load-module module-stream-restore load-module module-device-restore -### Automatically restore the default sink/source when changed by the user during runtime +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value load-module module-default-device-restore +.ifexists module-dbus-protocol.so +### If you want to allow TCP connections, set access to "remote" or "local,remote". +load-module module-dbus-protocol access=local +.endif + ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams diff --git a/xdg/autostart/pulseaudio.desktop b/xdg/autostart/pulseaudio.desktop index a3d14fd2..a627175e 100644 --- a/xdg/autostart/pulseaudio.desktop +++ b/xdg/autostart/pulseaudio.desktop @@ -3,8 +3,10 @@ Version=1.0 Encoding=UTF-8 Name=PulseAudio Sound System Name[de]=PulseAudio Sound System +Name[ru]=Звуковая система PulseAudio Comment=Start the PulseAudio Sound System Comment[de]=Das PulseAudio Sound System starten +Comment[ru]=Запуск звуковой системы PulseAudio Exec=start-pulseaudio-x11 Terminal=false Type=Application -- 2.39.5