From: Frank Brehm Date: Sun, 22 Nov 2015 02:10:05 +0000 (+0100) Subject: daily autocommit X-Git-Url: https://git.uhu-banane.org/?a=commitdiff_plain;h=e3f793c0ee36adddb5d6d3ea1a6666aeb4411b57;p=config%2Fbruni%2Fetc.git daily autocommit --- diff --git a/config-archive/etc/ssh/sshd_config b/config-archive/etc/ssh/sshd_config index f6717754..9c2183fd 100644 --- a/config-archive/etc/ssh/sshd_config +++ b/config-archive/etc/ssh/sshd_config @@ -1,4 +1,4 @@ -# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $ +# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -85,7 +85,6 @@ PasswordAuthentication no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes -#GSSAPIStrictAcceptorCheck yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -114,8 +113,8 @@ UsePrivilegeSeparation sandbox # Default for new installations. #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 -#UseDNS yes -#PidFile /var/run/sshd.pid +#UseDNS no +#PidFile /run/sshd.pid #MaxStartups 10:30:100 #PermitTunnel no #ChrootDirectory none diff --git a/config-archive/etc/ssh/sshd_config.1 b/config-archive/etc/ssh/sshd_config.1 index 7bbd37f7..f6717754 100644 --- a/config-archive/etc/ssh/sshd_config.1 +++ b/config-archive/etc/ssh/sshd_config.1 @@ -1,4 +1,4 @@ -# $OpenBSD$ +# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -26,72 +26,6 @@ #HostKey /etc/ssh/ssh_host_ecdsa_key #HostKey /etc/ssh/ssh_host_ed25519_key -# "key type names" for X.509 certificates with RSA key -# Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 -#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 - -# "key type names" for X.509 certificates with DSA key -# Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-dss,dss-asn1 -#X509KeyAlgorithm x509v3-sign-dss,dss-raw - -# The intended use for the X509 client certificate. Without this option -# no chain verification will be done. Currently accepted uses are case -# insensitive: -# - "sslclient", "SSL client", "SSL_client" or "client" -# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose" -# - "skip" or ""(empty): don`t check purpose. -#AllowedCertPurpose sslclient - -# Specifies whether self-issued(self-signed) X.509 certificate can be -# allowed only by entry in AutorizedKeysFile that contain matching -# public key or certificate blob. -#KeyAllowSelfIssued no - -# Specifies whether CRL must present in store for all certificates in -# certificate chain with atribute "cRLDistributionPoints" -#MandatoryCRL no - -# A file with multiple certificates of certificate signers -# in PEM format concatenated together. -#CACertificateFile /etc/ssh/ca/ca-bundle.crt - -# A directory with certificates of certificate signers. -# The certificates should have name of the form: [HASH].[NUMBER] -# or have symbolic links to them of this form. -#CACertificatePath /etc/ssh/ca/crt - -# A file with multiple CRL of certificate signers -# in PEM format concatenated together. -#CARevocationFile /etc/ssh/ca/ca-bundle.crl - -# A directory with CRL of certificate signers. -# The CRL should have name of the form: [HASH].r[NUMBER] -# or have symbolic links to them of this form. -#CARevocationPath /etc/ssh/ca/crl - -# LDAP protocol version. -# Example: -# CAldapVersion 2 - -# Note because of OpenSSH options parser limitation -# use %3D instead of = ! -# LDAP initialization may require URL to be escaped, i.e. -# use %2C instead of ,(comma). Escaped URL don't depend from -# LDAP initialization method. -# Example: -# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom - -# SSH can use "Online Certificate Status Protocol"(OCSP) -# to validate certificate. Set VAType to -# - none : do not use OCSP to validate certificates; -# - ocspcert: validate only certificates that specify `OCSP -# Service Locator' URL; -# - ocspspec: use specified in the configuration 'OCSP Responder' -# to validate all certificates. -#VAType none - # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 @@ -137,7 +71,6 @@ PermitRootLogin yes # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no -#PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords @@ -194,13 +127,29 @@ UsePrivilegeSeparation sandbox # Default for new installations. # Allow client to pass locale environment variables AcceptEnv LANG LC_* +# here are the new patched ldap related tokens +# entries in your LDAP must have posixAccount & ldapPublicKey objectclass +#UseLPK yes +#LpkLdapConf /etc/ldap.conf +#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/ +#LpkUserDN ou=users,dc=phear,dc=org +#LpkGroupDN ou=groups,dc=phear,dc=org +#LpkBindDN cn=Manager,dc=phear,dc=org +#LpkBindPw secret +#LpkServerGroup mail +#LpkFilter (hostAccess=master.phear.org) +#LpkForceTLS no +#LpkSearchTimelimit 3 +#LpkBindTimelimit 3 +#LpkPubKeyAttr sshPublicKey + # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server # the following are HPN related configuration options # tcp receive buffer polling. disable in non autotuning kernels #TcpRcvBufPoll yes - + # disable hpn performance boosts #HPNDisabled no diff --git a/config-archive/etc/ssh/sshd_config.2 b/config-archive/etc/ssh/sshd_config.2 index 75517570..7bbd37f7 100644 --- a/config-archive/etc/ssh/sshd_config.2 +++ b/config-archive/etc/ssh/sshd_config.2 @@ -24,6 +24,7 @@ #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key #HostKey /etc/ssh/ssh_host_ecdsa_key +#HostKey /etc/ssh/ssh_host_ed25519_key # "key type names" for X.509 certificates with RSA key # Note first defined is used in signature operations! @@ -153,8 +154,8 @@ PasswordAuthentication no #GSSAPICleanupCredentials yes #GSSAPIStrictAcceptorCheck yes -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass @@ -170,6 +171,7 @@ UsePAM yes X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes +#PermitTTY yes PrintMotd no PrintLastLog no #TCPKeepAlive yes @@ -213,6 +215,7 @@ Subsystem sftp /usr/lib64/misc/sftp-server #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no +# PermitTTY no # ForceCommand cvs server # Allow client to pass locale environment variables #367017 diff --git a/config-archive/etc/ssh/sshd_config.3 b/config-archive/etc/ssh/sshd_config.3 index fac258de..75517570 100644 --- a/config-archive/etc/ssh/sshd_config.3 +++ b/config-archive/etc/ssh/sshd_config.3 @@ -27,8 +27,8 @@ # "key type names" for X.509 certificates with RSA key # Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 #X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 +#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 # "key type names" for X.509 certificates with DSA key # Note first defined is used in signature operations! @@ -95,6 +95,9 @@ #KeyRegenerationInterval 1h #ServerKeyBits 1024 +# Ciphers and keying +#RekeyLimit default none + # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH @@ -116,6 +119,11 @@ PermitRootLogin yes # but this is overridden so installations will only check .ssh/authorized_keys #AuthorizedKeysFile .ssh/authorized_keys +#AuthorizedPrincipalsFile none + +#AuthorizedKeysCommand none +#AuthorizedKeysCommandUser nobody + # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 @@ -166,16 +174,17 @@ PrintMotd no PrintLastLog no #TCPKeepAlive yes #UseLogin no -#UsePrivilegeSeparation yes +UsePrivilegeSeparation sandbox # Default for new installations. #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid -#MaxStartups 10 +#MaxStartups 10:30:100 #PermitTunnel no #ChrootDirectory none +#VersionAddendum none # no default banner path #Banner none @@ -190,18 +199,21 @@ Subsystem sftp /usr/lib64/misc/sftp-server # tcp receive buffer polling. disable in non autotuning kernels #TcpRcvBufPoll yes -# allow the use of the none cipher -#NoneEnabled no - -# disable hpn performance boosts. +# disable hpn performance boosts #HPNDisabled no # buffer size for hpn to non-hpn connections #HPNBufferSize 2048 +# allow the use of the none cipher +#NoneEnabled no + # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no # ForceCommand cvs server + +# Allow client to pass locale environment variables #367017 +AcceptEnv LANG LC_* diff --git a/config-archive/etc/ssh/sshd_config.4 b/config-archive/etc/ssh/sshd_config.4 index 176bf48d..fac258de 100644 --- a/config-archive/etc/ssh/sshd_config.4 +++ b/config-archive/etc/ssh/sshd_config.4 @@ -7,7 +7,7 @@ # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options change a +# possible, but leave them commented. Uncommented options override the # default value. #Port 22 @@ -103,13 +103,17 @@ # Authentication: #LoginGraceTime 2m -PermitRootLogin no +#PermitRootLogin no +PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 #RSAAuthentication yes #PubkeyAuthentication yes + +# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 +# but this is overridden so installations will only check .ssh/authorized_keys #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts @@ -139,6 +143,7 @@ PasswordAuthentication no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes +#GSSAPIStrictAcceptorCheck yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -175,6 +180,9 @@ PrintLastLog no # no default banner path #Banner none +# Allow client to pass locale environment variables +AcceptEnv LANG LC_* + # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server diff --git a/config-archive/etc/ssh/sshd_config.5 b/config-archive/etc/ssh/sshd_config.5 index 9f5583ea..176bf48d 100644 --- a/config-archive/etc/ssh/sshd_config.5 +++ b/config-archive/etc/ssh/sshd_config.5 @@ -1,4 +1,4 @@ -# $OpenBSD: sshd_config,v 1.82 2010/09/06 17:10:19 naddy Exp $ +# $OpenBSD$ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -175,22 +175,6 @@ PrintLastLog no # no default banner path #Banner none -# here are the new patched ldap related tokens -# entries in your LDAP must have posixAccount & ldapPublicKey objectclass -#UseLPK yes -#LpkLdapConf /etc/ldap.conf -#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/ -#LpkUserDN ou=users,dc=phear,dc=org -#LpkGroupDN ou=groups,dc=phear,dc=org -#LpkBindDN cn=Manager,dc=phear,dc=org -#LpkBindPw secret -#LpkServerGroup mail -#LpkFilter (hostAccess=master.phear.org) -#LpkForceTLS no -#LpkSearchTimelimit 3 -#LpkBindTimelimit 3 -#LpkPubKeyAttr sshPublicKey - # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server diff --git a/config-archive/etc/ssh/sshd_config.6 b/config-archive/etc/ssh/sshd_config.6 index f3c6c252..9f5583ea 100644 --- a/config-archive/etc/ssh/sshd_config.6 +++ b/config-archive/etc/ssh/sshd_config.6 @@ -1,4 +1,4 @@ -# $OpenBSD$ +# $OpenBSD: sshd_config,v 1.82 2010/09/06 17:10:19 naddy Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -175,8 +175,24 @@ PrintLastLog no # no default banner path #Banner none +# here are the new patched ldap related tokens +# entries in your LDAP must have posixAccount & ldapPublicKey objectclass +#UseLPK yes +#LpkLdapConf /etc/ldap.conf +#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/ +#LpkUserDN ou=users,dc=phear,dc=org +#LpkGroupDN ou=groups,dc=phear,dc=org +#LpkBindDN cn=Manager,dc=phear,dc=org +#LpkBindPw secret +#LpkServerGroup mail +#LpkFilter (hostAccess=master.phear.org) +#LpkForceTLS no +#LpkSearchTimelimit 3 +#LpkBindTimelimit 3 +#LpkPubKeyAttr sshPublicKey + # override default of no subsystems -Subsystem sftp /usr/lib/misc/sftp-server +Subsystem sftp /usr/lib64/misc/sftp-server # the following are HPN related configuration options # tcp receive buffer polling. disable in non autotuning kernels diff --git a/config-archive/etc/ssh/sshd_config.7 b/config-archive/etc/ssh/sshd_config.7 new file mode 100644 index 00000000..f3c6c252 --- /dev/null +++ b/config-archive/etc/ssh/sshd_config.7 @@ -0,0 +1,199 @@ +# $OpenBSD$ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options change a +# default value. + +#Port 22 +#AddressFamily any +#ListenAddress 0.0.0.0 +#ListenAddress :: + +# The default requires explicit activation of protocol 1 +#Protocol 2 + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +#HostKey /etc/ssh/ssh_host_rsa_key +#HostKey /etc/ssh/ssh_host_dsa_key +#HostKey /etc/ssh/ssh_host_ecdsa_key + +# "key type names" for X.509 certificates with RSA key +# Note first defined is used in signature operations! +#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 +#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 + +# "key type names" for X.509 certificates with DSA key +# Note first defined is used in signature operations! +#X509KeyAlgorithm x509v3-sign-dss,dss-asn1 +#X509KeyAlgorithm x509v3-sign-dss,dss-raw + +# The intended use for the X509 client certificate. Without this option +# no chain verification will be done. Currently accepted uses are case +# insensitive: +# - "sslclient", "SSL client", "SSL_client" or "client" +# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose" +# - "skip" or ""(empty): don`t check purpose. +#AllowedCertPurpose sslclient + +# Specifies whether self-issued(self-signed) X.509 certificate can be +# allowed only by entry in AutorizedKeysFile that contain matching +# public key or certificate blob. +#KeyAllowSelfIssued no + +# Specifies whether CRL must present in store for all certificates in +# certificate chain with atribute "cRLDistributionPoints" +#MandatoryCRL no + +# A file with multiple certificates of certificate signers +# in PEM format concatenated together. +#CACertificateFile /etc/ssh/ca/ca-bundle.crt + +# A directory with certificates of certificate signers. +# The certificates should have name of the form: [HASH].[NUMBER] +# or have symbolic links to them of this form. +#CACertificatePath /etc/ssh/ca/crt + +# A file with multiple CRL of certificate signers +# in PEM format concatenated together. +#CARevocationFile /etc/ssh/ca/ca-bundle.crl + +# A directory with CRL of certificate signers. +# The CRL should have name of the form: [HASH].r[NUMBER] +# or have symbolic links to them of this form. +#CARevocationPath /etc/ssh/ca/crl + +# LDAP protocol version. +# Example: +# CAldapVersion 2 + +# Note because of OpenSSH options parser limitation +# use %3D instead of = ! +# LDAP initialization may require URL to be escaped, i.e. +# use %2C instead of ,(comma). Escaped URL don't depend from +# LDAP initialization method. +# Example: +# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom + +# SSH can use "Online Certificate Status Protocol"(OCSP) +# to validate certificate. Set VAType to +# - none : do not use OCSP to validate certificates; +# - ocspcert: validate only certificates that specify `OCSP +# Service Locator' URL; +# - ocspspec: use specified in the configuration 'OCSP Responder' +# to validate all certificates. +#VAType none + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 1024 + +# Logging +# obsoletes QuietMode and FascistLogging +#SyslogFacility AUTH +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +PermitRootLogin no +#StrictModes yes +#MaxAuthTries 6 +#MaxSessions 10 + +#RSAAuthentication yes +#PubkeyAuthentication yes +#AuthorizedKeysFile .ssh/authorized_keys + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +#RhostsRSAAuthentication no +# similar for protocol version 2 +#HostbasedAuthentication no +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no +# Don't read the user's ~/.rhosts and ~/.shosts files +#IgnoreRhosts yes + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication no +#PasswordAuthentication yes +#PermitEmptyPasswords no + +# Change to no to disable s/key passwords +#ChallengeResponseAuthentication yes + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no + +# GSSAPI options +#GSSAPIAuthentication no +#GSSAPICleanupCredentials yes + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM yes + +#AllowAgentForwarding yes +#AllowTcpForwarding yes +#GatewayPorts no +X11Forwarding yes +#X11DisplayOffset 10 +#X11UseLocalhost yes +PrintMotd no +PrintLastLog no +#TCPKeepAlive yes +#UseLogin no +#UsePrivilegeSeparation yes +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#UseDNS yes +#PidFile /var/run/sshd.pid +#MaxStartups 10 +#PermitTunnel no +#ChrootDirectory none + +# no default banner path +#Banner none + +# override default of no subsystems +Subsystem sftp /usr/lib/misc/sftp-server + +# the following are HPN related configuration options +# tcp receive buffer polling. disable in non autotuning kernels +#TcpRcvBufPoll yes + +# allow the use of the none cipher +#NoneEnabled no + +# disable hpn performance boosts. +#HPNDisabled no + +# buffer size for hpn to non-hpn connections +#HPNBufferSize 2048 + + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server diff --git a/config-archive/etc/ssh/sshd_config.dist b/config-archive/etc/ssh/sshd_config.dist index 5b4b032b..1647cbe4 100644 --- a/config-archive/etc/ssh/sshd_config.dist +++ b/config-archive/etc/ssh/sshd_config.dist @@ -1,4 +1,4 @@ -# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $ +# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -41,7 +41,7 @@ # Authentication: #LoginGraceTime 2m -#PermitRootLogin no +#PermitRootLogin prohibit-password #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 diff --git a/config-archive/etc/sudoers b/config-archive/etc/sudoers index 15ae4fb6..47d1316c 100644 --- a/config-archive/etc/sudoers +++ b/config-archive/etc/sudoers @@ -27,6 +27,7 @@ ## Groups of commands. Often used to group related commands together. # Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \ # /usr/bin/pkill, /usr/bin/top +# Cmnd_Alias REBOOT = /sbin/halt, /sbin/reboot, /sbin/poweroff ## ## Defaults specification @@ -60,7 +61,7 @@ # Defaults log_output # Defaults!/usr/bin/sudoreplay !log_output # Defaults!/usr/local/bin/sudoreplay !log_output -# Defaults!/sbin/reboot !log_output +# Defaults!REBOOT !log_output ## ## Runas alias specification diff --git a/config-archive/etc/sudoers.1 b/config-archive/etc/sudoers.1 index 35c422c1..15ae4fb6 100644 --- a/config-archive/etc/sudoers.1 +++ b/config-archive/etc/sudoers.1 @@ -82,6 +82,8 @@ root ALL=(ALL) ALL frank ALL=(ALL) NOPASSWD: ALL +backuppc ALL = NOPASSWD: /bin/tar + ## Uncomment to allow any user to run sudo if they know the password ## of the user they are running the command as (root by default). # Defaults targetpw # Ask for the password of the target user diff --git a/config-archive/etc/sudoers.2 b/config-archive/etc/sudoers.2 new file mode 100644 index 00000000..35c422c1 --- /dev/null +++ b/config-archive/etc/sudoers.2 @@ -0,0 +1,92 @@ +## sudoers file. +## +## This file MUST be edited with the 'visudo' command as root. +## Failure to use 'visudo' may result in syntax or file permission errors +## that prevent sudo from running. +## +## See the sudoers man page for the details on how to write a sudoers file. +## + +## +## Host alias specification +## +## Groups of machines. These may include host names (optionally with wildcards), +## IP addresses, network numbers or netgroups. +# Host_Alias WEBSERVERS = www1, www2, www3 + +## +## User alias specification +## +## Groups of users. These may consist of user names, uids, Unix groups, +## or netgroups. +# User_Alias ADMINS = millert, dowdy, mikef + +## +## Cmnd alias specification +## +## Groups of commands. Often used to group related commands together. +# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \ +# /usr/bin/pkill, /usr/bin/top + +## +## Defaults specification +## +## You may wish to keep some of the following environment variables +## when running commands via sudo. +## +## Locale settings +# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET" +## +## Run X applications through sudo; HOME is used to find the +## .Xauthority file. Note that other programs use HOME to find +## configuration files and this may lead to privilege escalation! +# Defaults env_keep += "HOME" +## +## X11 resource path settings +# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH" +## +## Desktop path settings +# Defaults env_keep += "QTDIR KDEDIR" +## +## Allow sudo-run commands to inherit the callers' ConsoleKit session +# Defaults env_keep += "XDG_SESSION_COOKIE" +## +## Uncomment to enable special input methods. Care should be taken as +## this may allow users to subvert the command being run via sudo. +# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER" +## +## Uncomment to enable logging of a command's output, except for +## sudoreplay and reboot. Use sudoreplay to play back logged sessions. +# Defaults log_output +# Defaults!/usr/bin/sudoreplay !log_output +# Defaults!/usr/local/bin/sudoreplay !log_output +# Defaults!/sbin/reboot !log_output + +## +## Runas alias specification +## + +## +## User privilege specification +## +root ALL=(ALL) ALL + +## Uncomment to allow members of group wheel to execute any command +# %wheel ALL=(ALL) ALL + +## Same thing without a password +# %wheel ALL=(ALL) NOPASSWD: ALL + +## Uncomment to allow members of group sudo to execute any command +# %sudo ALL=(ALL) ALL + +frank ALL=(ALL) NOPASSWD: ALL + +## Uncomment to allow any user to run sudo if they know the password +## of the user they are running the command as (root by default). +# Defaults targetpw # Ask for the password of the target user +# ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw' + +## Read drop-in files from /etc/sudoers.d +## (the '#' here does not indicate a comment) +#includedir /etc/sudoers.d diff --git a/config-archive/etc/sudoers.dist b/config-archive/etc/sudoers.dist index 4808d473..c1563c91 100644 --- a/config-archive/etc/sudoers.dist +++ b/config-archive/etc/sudoers.dist @@ -56,6 +56,12 @@ ## this may allow users to subvert the command being run via sudo. # Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER" ## +## Uncomment to use a hard-coded PATH instead of the user's to find commands +# Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" +## +## Uncomment to send mail if the user does not enter the correct password. +# Defaults mail_badpass +## ## Uncomment to enable logging of a command's output, except for ## sudoreplay and reboot. Use sudoreplay to play back logged sessions. # Defaults log_output diff --git a/cups/printers.conf b/cups/printers.conf index 8d1607cc..bb95472b 100644 --- a/cups/printers.conf +++ b/cups/printers.conf @@ -1,5 +1,5 @@ # Printer configuration file for CUPS v2.0.3 -# Written by cupsd on 2015-11-17 08:16 +# Written by cupsd on 2015-11-21 11:07 # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING UUID urn:uuid:37ccb9f9-f39f-3442-414c-7de19e42748d diff --git a/cups/subscriptions.conf b/cups/subscriptions.conf index 56d42009..22a92b49 100644 --- a/cups/subscriptions.conf +++ b/cups/subscriptions.conf @@ -1,3 +1,11 @@ # Subscription configuration file for CUPS v2.0.3 -# Written by cupsd on 2015-11-18 08:16 -NextSubscriptionId 234 +# Written by cupsd on 2015-11-21 11:07 +NextSubscriptionId 235 + +Events printer-changed +Owner root +LeaseDuration 86400 +Interval 60 +ExpirationTime 1448186793 +NextEventId 1 + diff --git a/ssh/sshd_config b/ssh/sshd_config index 9c2183fd..4db817fc 100644 --- a/ssh/sshd_config +++ b/ssh/sshd_config @@ -1,4 +1,4 @@ -# $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $ +# $OpenBSD: sshd_config,v 1.97 2015/08/06 14:53:21 deraadt Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -42,6 +42,7 @@ #LoginGraceTime 2m #PermitRootLogin no +#PermitRootLogin prohibit-password PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 diff --git a/sudoers b/sudoers index 47d1316c..c6b2a468 100644 --- a/sudoers +++ b/sudoers @@ -56,6 +56,12 @@ ## this may allow users to subvert the command being run via sudo. # Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER" ## +## Uncomment to use a hard-coded PATH instead of the user's to find commands +# Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" +## +## Uncomment to send mail if the user does not enter the correct password. +# Defaults mail_badpass +## ## Uncomment to enable logging of a command's output, except for ## sudoreplay and reboot. Use sudoreplay to play back logged sessions. # Defaults log_output