From: Frank Brehm Date: Wed, 13 Mar 2013 14:24:06 +0000 (+0100) Subject: Current state X-Git-Url: https://git.uhu-banane.org/?a=commitdiff_plain;h=c7f8b061a3d543b04eea5d2462222a051def1f07;p=config%2Fhelga%2Fetc.git Current state --- diff --git a/apache2/modules.d/00_apache_manual.conf b/apache2/modules.d/00_apache_manual.conf index db1f06d..a0e5c83 100644 --- a/apache2/modules.d/00_apache_manual.conf +++ b/apache2/modules.d/00_apache_manual.conf @@ -3,9 +3,9 @@ # The documentation is always available at # http://httpd.apache.org/docs/2.2/ -AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apache-2.2.23/manual$1" +AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apache-2.2.24/manual$1" - + Options Indexes AllowOverride None Order allow,deny diff --git a/config-archive/etc/inittab b/config-archive/etc/inittab new file mode 100644 index 0000000..3d50dac --- /dev/null +++ b/config-archive/etc/inittab @@ -0,0 +1,60 @@ +# +# /etc/inittab: This file describes how the INIT process should set up +# the system in a certain run-level. +# +# Author: Miquel van Smoorenburg, +# Modified by: Patrick J. Volkerding, +# Modified by: Daniel Robbins, +# Modified by: Martin Schlemmer, +# Modified by: Mike Frysinger, +# Modified by: Robin H. Johnson, +# +# $Header: /var/cvsroot/gentoo-x86/sys-apps/sysvinit/files/inittab-2.87,v 1.1 2010/01/08 16:55:07 williamh Exp $ + +# Default runlevel. +id:3:initdefault: + +# System initialization, mount local filesystems, etc. +si::sysinit:/sbin/rc sysinit + +# Further system initialization, brings up the boot runlevel. +rc::bootwait:/sbin/rc boot + +l0:0:wait:/sbin/rc shutdown +l0s:0:wait:/sbin/halt -dhp +l1:1:wait:/sbin/rc single +l2:2:wait:/sbin/rc nonetwork +l3:3:wait:/sbin/rc default +l4:4:wait:/sbin/rc default +l5:5:wait:/sbin/rc default +l6:6:wait:/sbin/rc reboot +l6r:6:wait:/sbin/reboot -dk +#z6:6:respawn:/sbin/sulogin + +# new-style single-user +su0:S:wait:/sbin/rc single +su1:S:wait:/sbin/sulogin + +# TERMINALS +c1:12345:respawn:/sbin/agetty --noclear 38400 tty1 linux +c2:2345:respawn:/sbin/agetty 38400 tty2 linux +c3:2345:respawn:/sbin/agetty 38400 tty3 linux +c4:2345:respawn:/sbin/agetty 38400 tty4 linux +c5:2345:respawn:/sbin/agetty 38400 tty5 linux +c6:2345:respawn:/sbin/agetty 38400 tty6 linux + +# SERIAL CONSOLES +#s0:12345:respawn:/sbin/agetty 115200 ttyS0 vt100 +#s1:12345:respawn:/sbin/agetty 115200 ttyS1 vt100 +s0:12345:respawn:/sbin/agetty -L ttyS0 57600 vt100 + +# What to do at the "Three Finger Salute". +ca:12345:ctrlaltdel:/sbin/shutdown -r now + +# Used by /etc/init.d/xdm to control DM startup. +# Read the comments in /etc/init.d/xdm for more +# info. Do NOT remove, as this will start nothing +# extra at boot if /etc/init.d/xdm is not added +# to the "default" runlevel. +x:a:once:/etc/X11/startDM.sh + diff --git a/config-archive/etc/inittab.dist.new b/config-archive/etc/inittab.dist.new index a6a04f3..2f6af66 100644 --- a/config-archive/etc/inittab.dist.new +++ b/config-archive/etc/inittab.dist.new @@ -44,8 +44,8 @@ c5:2345:respawn:/sbin/agetty 38400 tty5 linux c6:2345:respawn:/sbin/agetty 38400 tty6 linux # SERIAL CONSOLES -#s0:12345:respawn:/sbin/agetty 9600 ttyS0 vt100 -#s1:12345:respawn:/sbin/agetty 9600 ttyS1 vt100 +#s0:12345:respawn:/sbin/agetty 115200 ttyS0 vt100 +#s1:12345:respawn:/sbin/agetty 115200 ttyS1 vt100 # What to do at the "Three Finger Salute". ca:12345:ctrlaltdel:/sbin/shutdown -r now diff --git a/config-archive/etc/nagios/nrpe.cfg b/config-archive/etc/nagios/nrpe.cfg index e121a78..b04eff8 100644 --- a/config-archive/etc/nagios/nrpe.cfg +++ b/config-archive/etc/nagios/nrpe.cfg @@ -14,7 +14,7 @@ # LOG FACILITY # The syslog facility that should be used for logging purposes. -log_facility=daemon +log_facility=local7 @@ -23,7 +23,7 @@ log_facility=daemon # number. The file is only written if the NRPE daemon is started by the root # user and is running in standalone mode. -pid_file=/var/run/nrpe/nrpe.pid +pid_file=/var/run/nrpe.pid @@ -67,7 +67,9 @@ nrpe_group=nagios # ALLOWED HOST ADDRESSES # This is an optional comma-delimited list of IP address or hostnames -# that are allowed to talk to the NRPE daemon. +# that are allowed to talk to the NRPE daemon. Network addresses with a bit mask +# (i.e. 192.168.1.0/24) are also supported. Hostname wildcards are not currently +# supported. # # Note: The daemon only does rudimentary checking of the client's IP # address. I would highly recommend adding entries in your /etc/hosts.allow @@ -76,7 +78,7 @@ nrpe_group=nagios # # NOTE: This option is ignored if NRPE is running under either inetd or xinetd -allowed_hosts=127.0.0.1 +allowed_hosts=127.0.0.1,46.16.73.147 @@ -92,7 +94,7 @@ allowed_hosts=127.0.0.1 # # Values: 0=do not allow arguments, 1=allow command arguments -dont_blame_nrpe=0 +dont_blame_nrpe=1 @@ -196,11 +198,11 @@ connection_timeout=300 # The following examples use hardcoded command arguments... -command[check_users]=/usr/lib64/nagios/plugins/check_users -w 5 -c 10 -command[check_load]=/usr/lib64/nagios/plugins/check_load -w 15,10,5 -c 30,25,20 -command[check_hda1]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1 -command[check_zombie_procs]=/usr/lib64/nagios/plugins/check_procs -w 5 -c 10 -s Z -command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c 200 +#command[check_users]=/usr/lib64/nagios/plugins/check_users -w 5 -c 10 +#command[check_load]=/usr/lib64/nagios/plugins/check_load -w 15,10,5 -c 30,25,20 +#command[check_hda1]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1 +#command[check_zombie_procs]=/usr/lib64/nagios/plugins/check_procs -w 5 -c 10 -s Z +#command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c 200 # The following examples allow user-supplied arguments and can @@ -209,7 +211,13 @@ command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c 200 # config file is set to '1'. This poses a potential security risk, so # make sure you read the SECURITY file before doing this. -#command[check_users]=/usr/lib64/nagios/plugins/check_users -w $ARG1$ -c $ARG2$ -#command[check_load]=/usr/lib64/nagios/plugins/check_load -w $ARG1$ -c $ARG2$ -#command[check_disk]=/usr/lib64/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$ +command[check_users]=/usr/lib64/nagios/plugins/check_users -w $ARG1$ -c $ARG2$ +command[check_load]=/usr/lib64/nagios/plugins/check_load -w $ARG1$ -c $ARG2$ +command[check_disk]=/usr/lib64/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$ #command[check_procs]=/usr/lib64/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$ +command[check_swap]=/usr/lib64/nagios/plugins/check_swap -w $ARG1$ -c $ARG2$ + +command[check_procs]=/opt/icinga/bin/check-procs.pl -w $ARG1$ -c $ARG2$ -s $ARG3$ +command[check_proc_arg]=/opt/icinga/bin/check-procs.pl -w $ARG1$ -c $ARG2$ -a $ARG3$ +command[check_init_proc]=/opt/icinga/bin/check-procs.pl -i -w $ARG1$ -c $ARG2$ -a $ARG3$ + diff --git a/config-archive/etc/nagios/nrpe.cfg.1 b/config-archive/etc/nagios/nrpe.cfg.1 new file mode 100644 index 0000000..e121a78 --- /dev/null +++ b/config-archive/etc/nagios/nrpe.cfg.1 @@ -0,0 +1,215 @@ +############################################################################# +# Sample NRPE Config File +# Written by: Ethan Galstad (nagios@nagios.org) +# +# Last Modified: 11-23-2007 +# +# NOTES: +# This is a sample configuration file for the NRPE daemon. It needs to be +# located on the remote host that is running the NRPE daemon, not the host +# from which the check_nrpe client is being executed. +############################################################################# + + +# LOG FACILITY +# The syslog facility that should be used for logging purposes. + +log_facility=daemon + + + +# PID FILE +# The name of the file in which the NRPE daemon should write it's process ID +# number. The file is only written if the NRPE daemon is started by the root +# user and is running in standalone mode. + +pid_file=/var/run/nrpe/nrpe.pid + + + +# PORT NUMBER +# Port number we should wait for connections on. +# NOTE: This must be a non-priviledged port (i.e. > 1024). +# NOTE: This option is ignored if NRPE is running under either inetd or xinetd + +server_port=5666 + + + +# SERVER ADDRESS +# Address that nrpe should bind to in case there are more than one interface +# and you do not want nrpe to bind on all interfaces. +# NOTE: This option is ignored if NRPE is running under either inetd or xinetd + +#server_address=127.0.0.1 + + + +# NRPE USER +# This determines the effective user that the NRPE daemon should run as. +# You can either supply a username or a UID. +# +# NOTE: This option is ignored if NRPE is running under either inetd or xinetd + +nrpe_user=nagios + + + +# NRPE GROUP +# This determines the effective group that the NRPE daemon should run as. +# You can either supply a group name or a GID. +# +# NOTE: This option is ignored if NRPE is running under either inetd or xinetd + +nrpe_group=nagios + + + +# ALLOWED HOST ADDRESSES +# This is an optional comma-delimited list of IP address or hostnames +# that are allowed to talk to the NRPE daemon. +# +# Note: The daemon only does rudimentary checking of the client's IP +# address. I would highly recommend adding entries in your /etc/hosts.allow +# file to allow only the specified host to connect to the port +# you are running this daemon on. +# +# NOTE: This option is ignored if NRPE is running under either inetd or xinetd + +allowed_hosts=127.0.0.1 + + + +# COMMAND ARGUMENT PROCESSING +# This option determines whether or not the NRPE daemon will allow clients +# to specify arguments to commands that are executed. This option only works +# if the daemon was configured with the --enable-command-args configure script +# option. +# +# *** ENABLING THIS OPTION IS A SECURITY RISK! *** +# Read the SECURITY file for information on some of the security implications +# of enabling this variable. +# +# Values: 0=do not allow arguments, 1=allow command arguments + +dont_blame_nrpe=0 + + + +# COMMAND PREFIX +# This option allows you to prefix all commands with a user-defined string. +# A space is automatically added between the specified prefix string and the +# command line from the command definition. +# +# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! *** +# Usage scenario: +# Execute restricted commmands using sudo. For this to work, you need to add +# the nagios user to your /etc/sudoers. An example entry for alllowing +# execution of the plugins from might be: +# +# nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/ +# +# This lets the nagios user run all commands in that directory (and only them) +# without asking for a password. If you do this, make sure you don't give +# random users write access to that directory or its contents! + +# command_prefix=/usr/bin/sudo + + + +# DEBUGGING OPTION +# This option determines whether or not debugging messages are logged to the +# syslog facility. +# Values: 0=debugging off, 1=debugging on + +debug=0 + + + +# COMMAND TIMEOUT +# This specifies the maximum number of seconds that the NRPE daemon will +# allow plugins to finish executing before killing them off. + +command_timeout=60 + + + +# CONNECTION TIMEOUT +# This specifies the maximum number of seconds that the NRPE daemon will +# wait for a connection to be established before exiting. This is sometimes +# seen where a network problem stops the SSL being established even though +# all network sessions are connected. This causes the nrpe daemons to +# accumulate, eating system resources. Do not set this too low. + +connection_timeout=300 + + + +# WEEK RANDOM SEED OPTION +# This directive allows you to use SSL even if your system does not have +# a /dev/random or /dev/urandom (on purpose or because the necessary patches +# were not applied). The random number generator will be seeded from a file +# which is either a file pointed to by the environment valiable $RANDFILE +# or $HOME/.rnd. If neither exists, the pseudo random number generator will +# be initialized and a warning will be issued. +# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness + +#allow_weak_random_seed=1 + + + +# INCLUDE CONFIG FILE +# This directive allows you to include definitions from an external config file. + +#include= + + + +# INCLUDE CONFIG DIRECTORY +# This directive allows you to include definitions from config files (with a +# .cfg extension) in one or more directories (with recursion). + +#include_dir= +#include_dir= + + + +# COMMAND DEFINITIONS +# Command definitions that this daemon will run. Definitions +# are in the following format: +# +# command[]= +# +# When the daemon receives a request to return the results of +# it will execute the command specified by the argument. +# +# Unlike Nagios, the command line cannot contain macros - it must be +# typed exactly as it should be executed. +# +# Note: Any plugins that are used in the command lines must reside +# on the machine that this daemon is running on! The examples below +# assume that you have plugins installed in a /usr/local/nagios/libexec +# directory. Also note that you will have to modify the definitions below +# to match the argument format the plugins expect. Remember, these are +# examples only! + + +# The following examples use hardcoded command arguments... + +command[check_users]=/usr/lib64/nagios/plugins/check_users -w 5 -c 10 +command[check_load]=/usr/lib64/nagios/plugins/check_load -w 15,10,5 -c 30,25,20 +command[check_hda1]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1 +command[check_zombie_procs]=/usr/lib64/nagios/plugins/check_procs -w 5 -c 10 -s Z +command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c 200 + + +# The following examples allow user-supplied arguments and can +# only be used if the NRPE daemon was compiled with support for +# command arguments *AND* the dont_blame_nrpe directive in this +# config file is set to '1'. This poses a potential security risk, so +# make sure you read the SECURITY file before doing this. + +#command[check_users]=/usr/lib64/nagios/plugins/check_users -w $ARG1$ -c $ARG2$ +#command[check_load]=/usr/lib64/nagios/plugins/check_load -w $ARG1$ -c $ARG2$ +#command[check_disk]=/usr/lib64/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$ +#command[check_procs]=/usr/lib64/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$ diff --git a/config-archive/etc/nagios/nrpe.cfg.dist b/config-archive/etc/nagios/nrpe.cfg.dist index 513d753..a846df4 100644 --- a/config-archive/etc/nagios/nrpe.cfg.dist +++ b/config-archive/etc/nagios/nrpe.cfg.dist @@ -23,7 +23,7 @@ log_facility=daemon # number. The file is only written if the NRPE daemon is started by the root # user and is running in standalone mode. -pid_file=/var/run/nrpe.pid +pid_file=/run/nrpe.pid @@ -98,6 +98,24 @@ dont_blame_nrpe=0 +# BASH COMMAND SUBTITUTION +# This option determines whether or not the NRPE daemon will allow clients +# to specify arguments that contain bash command substitutions of the form +# $(...). This option only works if the daemon was configured with both +# the --enable-command-args and --enable-bash-command-substitution configure +# script options. +# +# *** ENABLING THIS OPTION IS A HIGH SECURITY RISK! *** +# Read the SECURITY file for information on some of the security implications +# of enabling this variable. +# +# Values: 0=do not allow bash command substitutions, +# 1=allow bash command substitutions + +allow_bash_command_substitution=0 + + + # COMMAND PREFIX # This option allows you to prefix all commands with a user-defined string. # A space is automatically added between the specified prefix string and the diff --git a/init.d/mit-krb5kadmind b/init.d/mit-krb5kadmind index 75d411c..7b28fb2 100755 --- a/init.d/mit-krb5kadmind +++ b/init.d/mit-krb5kadmind @@ -8,7 +8,8 @@ daemon="MIT Kerberos 5 Admin daemon" exec="/usr/sbin/kadmind" depend() { - need net mit-krb5kdc + need mit-krb5kdc + use net } start() { diff --git a/init.d/mit-krb5kdc b/init.d/mit-krb5kdc index d0ab859..94f1f79 100755 --- a/init.d/mit-krb5kdc +++ b/init.d/mit-krb5kdc @@ -8,7 +8,7 @@ daemon="MIT Kerberos 5 KDC" exec="/usr/sbin/krb5kdc" depend() { - need net + use net } start() { diff --git a/init.d/mit-krb5kpropd b/init.d/mit-krb5kpropd index 76841da..d800d66 100755 --- a/init.d/mit-krb5kpropd +++ b/init.d/mit-krb5kpropd @@ -8,8 +8,7 @@ daemon="MIT Kerberos 5 kpropd" exec="/usr/sbin/kpropd" depend() { - need net - use mit-krb5kdc mit-krb5kadmind + use net mit-krb5kdc mit-krb5kadmind } start() { diff --git a/init.d/nrpe b/init.d/nrpe index 3c33490..21fa4f0 100755 --- a/init.d/nrpe +++ b/init.d/nrpe @@ -1,7 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2012 Gentoo Foundation +# Copyright 1999-2013 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nrpe/files/nrpe.init,v 1.2 2012/10/22 02:35:52 flameeyes Exp $ +# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nrpe/files/nrpe.init,v 1.3 2013/01/25 17:43:36 flameeyes Exp $ : ${CFGFILE:=/etc/nagios/nrpe.cfg} diff --git a/nagios/nrpe.cfg b/nagios/nrpe.cfg index b04eff8..026d7e9 100644 --- a/nagios/nrpe.cfg +++ b/nagios/nrpe.cfg @@ -98,6 +98,24 @@ dont_blame_nrpe=1 +# BASH COMMAND SUBTITUTION +# This option determines whether or not the NRPE daemon will allow clients +# to specify arguments that contain bash command substitutions of the form +# $(...). This option only works if the daemon was configured with both +# the --enable-command-args and --enable-bash-command-substitution configure +# script options. +# +# *** ENABLING THIS OPTION IS A HIGH SECURITY RISK! *** +# Read the SECURITY file for information on some of the security implications +# of enabling this variable. +# +# Values: 0=do not allow bash command substitutions, +# 1=allow bash command substitutions + +allow_bash_command_substitution=0 + + + # COMMAND PREFIX # This option allows you to prefix all commands with a user-defined string. # A space is automatically added between the specified prefix string and the diff --git a/openldap/schema/kerberos.schema b/openldap/schema/kerberos.schema index f4f8aca..ecc7783 100644 --- a/openldap/schema/kerberos.schema +++ b/openldap/schema/kerberos.schema @@ -297,6 +297,42 @@ attributetype ( 1.3.6.1.4.1.5322.21.2.3 SINGLE-VALUE) +##### Policy attribute flags + +attributetype ( 1.2.840.113554.1.4.1.6.2 + NAME 'krbPwdAttributes' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 + SINGLE-VALUE) + + +##### Policy maximum ticket lifetime + +attributetype ( 1.2.840.113554.1.4.1.6.3 + NAME 'krbPwdMaxLife' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 + SINGLE-VALUE) + + +##### Policy maximum ticket renewable lifetime + +attributetype ( 1.2.840.113554.1.4.1.6.4 + NAME 'krbPwdMaxRenewableLife' + EQUALITY integerMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 + SINGLE-VALUE) + + +##### Allowed enctype:salttype combinations for key changes + +attributetype ( 1.2.840.113554.1.4.1.6.5 + NAME 'krbPwdAllowedKeysalts' + EQUALITY caseIgnoreIA5Match + SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 + SINGLE-VALUE) + + ##### FDN pointing to a Kerberos Password Policy object attributetype ( 2.16.840.1.113719.1.301.4.36.1 @@ -656,7 +692,7 @@ objectclass ( 2.16.840.1.113719.1.301.6.14.1 NAME 'krbPwdPolicy' SUP top MUST ( cn ) - MAY ( krbMaxPwdLife $ krbMinPwdLife $ krbPwdMinDiffChars $ krbPwdMinLength $ krbPwdHistoryLength $ krbPwdMaxFailure $ krbPwdFailureCountInterval $ krbPwdLockoutDuration ) ) + MAY ( krbMaxPwdLife $ krbMinPwdLife $ krbPwdMinDiffChars $ krbPwdMinLength $ krbPwdHistoryLength $ krbPwdMaxFailure $ krbPwdFailureCountInterval $ krbPwdLockoutDuration $ krbPwdAttributes $ krbPwdMaxLife $ krbPwdMaxRenewableLife $ krbPwdAllowedKeysalts ) ) ##### The krbTicketPolicyAux holds Kerberos ticket policy attributes.