From: frank Date: Mon, 12 Mar 2012 17:45:35 +0000 (+0100) Subject: saving uncommitted changes in /etc prior to emerge run X-Git-Url: https://git.uhu-banane.org/?a=commitdiff_plain;h=9e12db1d6b06ff57d58dc9fe17b7dae38dcfb943;p=config%2Fbruni%2Fetc.git saving uncommitted changes in /etc prior to emerge run --- diff --git a/conf.d/._cfg0000_alsasound b/conf.d/._cfg0000_alsasound deleted file mode 100644 index 6fec8f59..00000000 --- a/conf.d/._cfg0000_alsasound +++ /dev/null @@ -1,15 +0,0 @@ -# RESTORE_ON_START: -# Do you want to restore your mixer settings? If not, your cards will be -# muted. -# no - Do not restore state -# yes - Restore state - -RESTORE_ON_START="yes" - -# SAVE_ON_STOP: -# Do you want to save changes made to your mixer volumes when alsasound -# stops? -# no - Do not save state -# yes - Save state - -SAVE_ON_STOP="yes" diff --git a/conf.d/alsasound b/conf.d/alsasound index 0a5d58fc..b2c41fef 100644 --- a/conf.d/alsasound +++ b/conf.d/alsasound @@ -1,10 +1,3 @@ -# ENABLE_OSS_EMUL: -# Do you want to enable in-kernel oss emulation? -# no - Do not load oss emul drivers -# yes - Load oss emul drivers if they're found - -ENABLE_OSS_EMUL="yes" - # RESTORE_ON_START: # Do you want to restore your mixer settings? If not, your cards will be # muted. diff --git a/config-archive/etc/conf.d/alsasound b/config-archive/etc/conf.d/alsasound new file mode 100644 index 00000000..0a5d58fc --- /dev/null +++ b/config-archive/etc/conf.d/alsasound @@ -0,0 +1,31 @@ +# ENABLE_OSS_EMUL: +# Do you want to enable in-kernel oss emulation? +# no - Do not load oss emul drivers +# yes - Load oss emul drivers if they're found + +ENABLE_OSS_EMUL="yes" + +# RESTORE_ON_START: +# Do you want to restore your mixer settings? If not, your cards will be +# muted. +# no - Do not restore state +# yes - Restore state + +RESTORE_ON_START="yes" + +# SAVE_ON_STOP: +# Do you want to save changes made to your mixer volumes when alsasound +# stops? +# no - Do not save state +# yes - Save state + +SAVE_ON_STOP="yes" + +# LOAD_ON_START: +# Do you want to load sound modules when alsasound starts? +# Note: The Gentoo ALSA developers encourage you to build your sound +# drivers into the kernel unless the device is hotpluggable or +# you need to supply specific options (such as model= to HD-Audio). +# no - Do not load modules +# yes - Load modules +LOAD_ON_START="yes" diff --git a/config-archive/etc/conf.d/alsasound.dist b/config-archive/etc/conf.d/alsasound.dist new file mode 100644 index 00000000..6fec8f59 --- /dev/null +++ b/config-archive/etc/conf.d/alsasound.dist @@ -0,0 +1,15 @@ +# RESTORE_ON_START: +# Do you want to restore your mixer settings? If not, your cards will be +# muted. +# no - Do not restore state +# yes - Restore state + +RESTORE_ON_START="yes" + +# SAVE_ON_STOP: +# Do you want to save changes made to your mixer volumes when alsasound +# stops? +# no - Do not save state +# yes - Save state + +SAVE_ON_STOP="yes" diff --git a/config-archive/etc/cups/cups-pdf.conf b/config-archive/etc/cups/cups-pdf.conf new file mode 100644 index 00000000..895fe9b3 --- /dev/null +++ b/config-archive/etc/cups/cups-pdf.conf @@ -0,0 +1,265 @@ +# cups-pdf.conf -- CUPS Backend Configuration (version 2.4.8, 2008-06-22) +# 18.09.2005, Volker C. Behr +# Exp. Physik V, Uni Wuerzburg +# vrbehr@cip.physik.uni-wuerzburg.de +# http://cip.physik.uni-wuerzburg.de/~vrbehr/cups-pdf +# +# +# This code may be freely distributed as long as this header +# is preserved. Changes to the code should be clearly indicated. +# +# This code is distributed under the GPL. +# (http://www.gnu.org/copyleft/gpl.html) +# +# For more detailed licensing information see cups-pdf.c in the +# corresponding version number. + +########################################################################### +# # +# This is the configuration file for CUPS-PDF. Values that are not set in # +# here will use the defaults. Changes take effect immediately without the # +# need for restarting any services. # +# # +# Take care not to add whitespaces at the end of a line! # +# # +########################################################################### + + +########################################################################### +# # +# Path Settings # +# # +########################################################################### + +### Key: Out +## CUPS-PDF output directory +## special qualifiers: +## ${HOME} will be expanded to the user's home directory +## ${USER} will be expanded to the user name +## in case it is an NFS export make sure it is exported without +## root_squash! +### Default: /var/spool/cups-pdf/${USER} + +#Out /var/spool/cups-pdf/${USER} + +### Key: AnonDirName +## ABSOLUTE path for anonymously created PDF files +## if anonymous access is disabled this setting has no effect +### Default: /var/spool/cups-pdf/ANONYMOUS + +#AnonDirName /var/spool/cups-pdf/ANONYMOUS + +### Key: Spool +## CUPS-PDF spool directory - make sure there is no user 'SPOOL' on your +## system or change the path +### Default: /var/spool/cups-pdf/SPOOL + +#Spool /var/spool/cups-pdf/SPOOL + + +########################################################################### +# # +# Filename Settings # +# # +########################################################################### + +### Key: Cut +## removing file name extensions before appending .pdf to output +## extensions will only be removed if _both_ the following criteria are met: +## - the extension (w/o the dot) is not longer than characters +## - the remaining filename has a minimal length of 1 character +## set Cut to -1 in order to disable cutting +## recommended values: pure UNIX environment : -1 +## mixed environments : 3 +### Default: 3 + +#Cut 3 + +### Key: Label +## label all jobs with a unique job-id in order to avoid overwriting old +## files in case new ones with identical names are created; always true for +## untitled documents +## 0: label untitled documents only, 1: label all documents +### Default: 0 + +#Label 0 + +### Key: TitlePref +## where to look first for a title when creating the output filename +## (title in PS file or title on commandline): +## 0: prefer title from %Title statement in the PS file +## 1: prefer title passed via commandline +### Default: 0 + +#TitlePref 0 + + +########################################################################### +# # +# User Settings # +# # +########################################################################### + +### Key: AnonUser +## user for anonymous PDF creation (this might be a security issue) +## set this to an empty value to disable anonymous +### Default: nobody + +#AnonUser nobody + +### Key: LowerCase +## This options allows to check user names given to CUPS-PDF additionally +## against their lower case variants. This is necessary since in some +## Windows environments only upper case user names are passed. Usually UNIX +## user names are all lower case and it is save to use this option +## but be aware that it can lead to mis-identifications in case +## you have user names that differ only in upper/lower case. +## check only against user name as passed to CUPS : 0 +## check additionally against lower case user name : 1 +### Default: 1 + +#LowerCase 1 + +### Key: UserPrefix +## some installations require a domain prefix added to the user name +## leave empty for no prefix +### Default: + +#UserPrefix + +### Key: DirPrefix +## if a prefix was defined above this switch toggels whether to include +## the prefix in the output directory's name (if not $HOME) or not +## 0: do not include, 1: include +### Default: 0 + +#DirPrefix 0 + +### Key: RemovePrefix +## some installation pass usernames with a prefix (usually a domain name) +## if you do not want this prefix to be used by the ${USER} variable for +## output directories put the part which is to be cut here +### Default: + +#RemovePrefix + + +########################################################################### +# # +# Security Settings # +# # +########################################################################### + +### Key: AnonUMask +## umask for anonymous output +## these are the _inverse_ permissions to be granted +### Default: 0000 + +#AnonUMask 0000 + +### Key: UserUMask +## umask for user output of known users +## changing this can introduce security leaks if confidential +## information is processed! +### Default: 0077 + +#UserUMask 0077 + +### Key: Grp +## group cups-pdf is supposed to run as - this will also be the gid for all +## created directories and log files +### Default: lp + +#Grp lp + + +########################################################################### +# # +# Log Settings # +# # +########################################################################### + +### Key: Log +## CUPS-PDF log directory +## set this to an empty value to disable all logging +### Default: /var/log/cups + +#Log /var/log/cups + +### Key: LogType +## log-mode +## 1: errors +## 2: status (i.e. activity) +## 4: debug - this will generate a lot of log-output! +## add up values to combine options, i.e. 7 is full logging +## if logging is disabled these setting have no effect +### Default: 3 + +#LogType 3 + + +########################################################################### +# # +# PDF Conversion Settings # +# # +########################################################################### + +### Key: GhostScript +## location of GhostScript binary (gs) +## MacOSX: for using pstopdf (recommended) set this to /usr/bin/pstopdf +## or its proper location on your system +### Default: /usr/bin/gs + +#GhostScript /usr/bin/gs + +### Key: GSTmp +## location of temporary files during GhostScript operation +## this must be user-writable like /var/tmp or /tmp ! +### Default: /var/tmp + +#GSTmp /var/tmp + +### Key: GSCall +## command line for calling GhostScript (!!! DO NOT USE NEWLINES !!!) +## MacOSX: for using pstopdf set this to %s %s -o %s %s +### Default: %s -q -dCompatibilityLevel=%s -dNOPAUSE -dBATCH -dSAFER -sDEVICE=pdfwrite -sOutputFile="%s" -dAutoRotatePages=/PageByPage -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -dPDFSETTINGS=/prepress -c .setpdfwrite -f %s + +#GSCall %s -q -dCompatibilityLevel=%s -dNOPAUSE -dBATCH -dSAFER -sDEVICE=pdfwrite -sOutputFile="%s" -dAutoRotatePages=/PageByPage -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -dPDFSETTINGS=/prepress -c .setpdfwrite -f %s + +### Key: PDFVer +## PDF version to be created - can be "1.5", "1.4", "1.3" or "1.2" +## MacOSX: for using pstopdf set this to an empty value +### Default: 1.4 + +#PDFVer 1.4 + +### Key: PostProcessing +## postprocessing script that will be called after the creation of the PDF +## as arguments the filename of the PDF, the username as determined by +## CUPS-PDF and the one as given to CUPS-PDF will be passed +## the script will be called with user privileges +## set this to an empty value to use no postprocessing +### Default: + +#PostProcessing + + +########################################################################### +# # +# Experimental Settings # +# These settings activate experimental options. If you decide to use # +# them I would appreciate any feedback - including an 'ok' if they # +# work as expected - so I can eventually put them into the non- # +# experimental sections. # +# # +########################################################################### + +### Key: DecodeHexStrings +## this option will try to decode hex strings in the title to allow +## internationalized titles +## (have a look at contrib/pstitleconv for a suitable filter for data +## from Windows clients) +## 0: disable, 1: enable +### Default: 0 + +#DecodeHexStrings 0 diff --git a/config-archive/etc/cups/cups-pdf.conf.dist b/config-archive/etc/cups/cups-pdf.conf.dist new file mode 100644 index 00000000..79a37692 --- /dev/null +++ b/config-archive/etc/cups/cups-pdf.conf.dist @@ -0,0 +1,287 @@ +# cups-pdf.conf -- CUPS Backend Configuration (version 2.6.1, 2011-10-04) +# 18.09.2005, Volker C. Behr +# Experimentelle Physik V, Universitaet Wuerzburg +# behr@physik.uni-wuerzburg.de +# http://www.cups-pdf.de +# +# +# This code may be freely distributed as long as this header +# is preserved. Changes to the code should be clearly indicated. +# +# This code is distributed under the GPL. +# (http://www.gnu.org/copyleft/gpl.html) +# +# For more detailed licensing information see cups-pdf.c in the +# corresponding version number. + +########################################################################### +# # +# This is the configuration file for CUPS-PDF. Values that are not set in # +# here will use the defaults. Changes take effect immediately without the # +# need for restarting any services. # +# # +# Take care not to add whitespaces at the end of a line! # +# # +########################################################################### + + +########################################################################### +# # +# Path Settings # +# # +########################################################################### + +### Key: Out +## CUPS-PDF output directory +## special qualifiers: +## ${HOME} will be expanded to the user's home directory +## ${USER} will be expanded to the user name +## in case it is an NFS export make sure it is exported without +## root_squash! +### Default: /var/spool/cups-pdf/${USER} + +#Out /var/spool/cups-pdf/${USER} + +### Key: AnonDirName +## ABSOLUTE path for anonymously created PDF files +## if anonymous access is disabled this setting has no effect +### Default: /var/spool/cups-pdf/ANONYMOUS + +#AnonDirName /var/spool/cups-pdf/ANONYMOUS + +### Key: Spool +## CUPS-PDF spool directory - make sure there is no user 'SPOOL' on your +## system or change the path +### Default: /var/spool/cups-pdf/SPOOL + +#Spool /var/spool/cups-pdf/SPOOL + + +########################################################################### +# # +# Filename Settings # +# # +########################################################################### + +### Key: Truncate +## truncate long filenames to a maximum of characters +## this does not consider the full path to the output but only the filename +## without the .pdf-extension or a job-id prefix (see 'Label') +## the minimal value is 8 +### Default: 64 + +#Truncate 64 + +### Key: Cut +## removing file name extensions before appending .pdf to output +## extensions will only be removed if _both_ the following criteria are met: +## - the extension (w/o the dot) is not longer than characters +## - the remaining filename has a minimal length of 1 character +## set Cut to -1 in order to disable cutting +## recommended values: pure UNIX environment : -1 +## mixed environments : 3 +### Default: 3 + +#Cut 3 + +### Key: Label +## label all jobs with a unique job-id in order to avoid overwriting old +## files in case new ones with identical names are created; always true for +## untitled documents +## 0: label untitled documents only +## 1: label all documents with a preceeding "job_#-" +## 2: label all documents with a tailing "-job_#" +### Default: 0 + +#Label 0 + +### Key: TitlePref +## where to look first for a title when creating the output filename +## (title in PS file or title on commandline): +## 0: prefer title from %Title statement in the PS file +## 1: prefer title passed via commandline +### Default: 0 + +#TitlePref 0 + + +########################################################################### +# # +# User Settings # +# # +########################################################################### + +### Key: AnonUser +## uid for anonymous PDF creation (this might be a security issue) +## this setting has no influence on AnonDirName (see there) +## set this to an empty value to disable anonymous +### Default: nobody + +#AnonUser nobody + +### Key: LowerCase +## This options allows to check user names given to CUPS-PDF additionally +## against their lower case variants. This is necessary since in some +## Windows environments only upper case user names are passed. Usually UNIX +## user names are all lower case and it is save to use this option +## but be aware that it can lead to mis-identifications in case +## you have user names that differ only in upper/lower case. +## check only against user name as passed to CUPS : 0 +## check additionally against lower case user name : 1 +### Default: 1 + +#LowerCase 1 + +### Key: UserPrefix +## some installations require a domain prefix added to the user name +## leave empty for no prefix +### Default: + +#UserPrefix + +### Key: DirPrefix +## if a prefix was defined above this switch toggels whether to include +## the prefix in the output directory's name (if not $HOME) or not +## 0: do not include, 1: include +### Default: 0 + +#DirPrefix 0 + +### Key: RemovePrefix +## some installation pass usernames with a prefix (usually a domain name) +## if you do not want this prefix to be used by the ${USER} variable for +## output directories put the part which is to be cut here +### Default: + +#RemovePrefix + + +########################################################################### +# # +# Security Settings # +# # +########################################################################### + +### Key: AnonUMask +## umask for anonymous output +## these are the _inverse_ permissions to be granted +### Default: 0000 + +#AnonUMask 0000 + +### Key: UserUMask +## umask for user output of known users +## changing this can introduce security leaks if confidential +## information is processed! +### Default: 0077 + +#UserUMask 0077 + +### Key: Grp +## group cups-pdf is supposed to run as - this will also be the gid for all +## created directories and log files +### Default: lp + +#Grp lp + + +########################################################################### +# # +# Log Settings # +# # +########################################################################### + +### Key: Log +## CUPS-PDF log directory +## set this to an empty value to disable all logging +### Default: /var/log/cups + +#Log /var/log/cups + +### Key: LogType +## log-mode +## 1: errors +## 2: status (i.e. activity) +## 4: debug - this will generate a lot of log-output! +## add up values to combine options, i.e. 7 is full logging +## if logging is disabled these setting have no effect +### Default: 3 + +#LogType 3 + + +########################################################################### +# # +# PDF Conversion Settings # +# # +########################################################################### + +### Key: GhostScript +## location of GhostScript binary (gs) +## MacOSX: for using pstopdf (recommended) set this to /usr/bin/pstopdf +## or its proper location on your system +### Default: /usr/bin/gs + +#GhostScript /usr/bin/gs + +### Key: GSTmp +## location of temporary files during GhostScript operation +## this must be user-writable like /var/tmp or /tmp ! +### Default: /var/tmp + +#GSTmp /var/tmp + +### Key: GSCall +## command line for calling GhostScript (!!! DO NOT USE NEWLINES !!!) +## MacOSX: for using pstopdf set this to %s %s -o %s %s +### Default: %s -q -dCompatibilityLevel=%s -dNOPAUSE -dBATCH -dSAFER -sDEVICE=pdfwrite -sOutputFile="%s" -dAutoRotatePages=/PageByPage -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -dPDFSETTINGS=/prepress -c .setpdfwrite -f %s + +#GSCall %s -q -dCompatibilityLevel=%s -dNOPAUSE -dBATCH -dSAFER -sDEVICE=pdfwrite -sOutputFile="%s" -dAutoRotatePages=/PageByPage -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -dPDFSETTINGS=/prepress -c .setpdfwrite -f %s + +### Key: PDFVer +## PDF version to be created - can be "1.5", "1.4", "1.3" or "1.2" +## MacOSX: for using pstopdf set this to an empty value +### Default: 1.4 + +#PDFVer 1.4 + +### Key: PostProcessing +## postprocessing script that will be called after the creation of the PDF +## as arguments the filename of the PDF, the username as determined by +## CUPS-PDF and the one as given to CUPS-PDF will be passed +## the script will be called with user privileges +## set this to an empty value to use no postprocessing +### Default: + +#PostProcessing + + +########################################################################### +# # +# Experimental Settings # +# These settings activate experimental options. If you decide to use # +# them I would appreciate any feedback - including an 'ok' if they # +# work as expected - so I can eventually put them into the non- # +# experimental sections. # +# # +########################################################################### + +### Key: DecodeHexStrings +## this option will try to decode hex strings in the title to allow +## internationalized titles +## (have a look at contrib/pstitleconv for a suitable filter for data +## from Windows clients) +## 0: disable, 1: enable +### Default: 0 + +#DecodeHexStrings 0 + +### Key: FixNewlines +## this option will try to fix various unusal line delimiters (e.g. +## form feeds) +## especially useful when using non-Linux-generated files +## 0: disable, 1: enable +### Default: 0 + +#FixNewlines 0 + diff --git a/config-archive/etc/eselect/postgresql/slots/9.1/base b/config-archive/etc/eselect/postgresql/slots/9.1/base index 25e967a5..479bd41d 100644 --- a/config-archive/etc/eselect/postgresql/slots/9.1/base +++ b/config-archive/etc/eselect/postgresql/slots/9.1/base @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.1.1" +postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.1.2" diff --git a/config-archive/etc/eselect/postgresql/slots/9.1/base.1 b/config-archive/etc/eselect/postgresql/slots/9.1/base.1 new file mode 100644 index 00000000..25e967a5 --- /dev/null +++ b/config-archive/etc/eselect/postgresql/slots/9.1/base.1 @@ -0,0 +1 @@ +postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.1.1" diff --git a/config-archive/etc/eselect/postgresql/slots/9.1/base.dist b/config-archive/etc/eselect/postgresql/slots/9.1/base.dist index 479bd41d..34425d9b 100644 --- a/config-archive/etc/eselect/postgresql/slots/9.1/base.dist +++ b/config-archive/etc/eselect/postgresql/slots/9.1/base.dist @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.1.2" +postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.1.3" diff --git a/config-archive/etc/eselect/postgresql/slots/9.1/docs b/config-archive/etc/eselect/postgresql/slots/9.1/docs index 133932cf..8cec4d40 100644 --- a/config-archive/etc/eselect/postgresql/slots/9.1/docs +++ b/config-archive/etc/eselect/postgresql/slots/9.1/docs @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.1.1" +postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.1.2" diff --git a/config-archive/etc/eselect/postgresql/slots/9.1/docs.1 b/config-archive/etc/eselect/postgresql/slots/9.1/docs.1 new file mode 100644 index 00000000..133932cf --- /dev/null +++ b/config-archive/etc/eselect/postgresql/slots/9.1/docs.1 @@ -0,0 +1 @@ +postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.1.1" diff --git a/config-archive/etc/eselect/postgresql/slots/9.1/docs.dist b/config-archive/etc/eselect/postgresql/slots/9.1/docs.dist index 8cec4d40..4b0d9a89 100644 --- a/config-archive/etc/eselect/postgresql/slots/9.1/docs.dist +++ b/config-archive/etc/eselect/postgresql/slots/9.1/docs.dist @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.1.2" +postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.1.3" diff --git a/config-archive/etc/eselect/postgresql/slots/9.1/server b/config-archive/etc/eselect/postgresql/slots/9.1/server index cc2c76ba..7a0a9c0f 100644 --- a/config-archive/etc/eselect/postgresql/slots/9.1/server +++ b/config-archive/etc/eselect/postgresql/slots/9.1/server @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.1.1" +postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.1.2-r2" diff --git a/config-archive/etc/eselect/postgresql/slots/9.1/server.1 b/config-archive/etc/eselect/postgresql/slots/9.1/server.1 new file mode 100644 index 00000000..cc2c76ba --- /dev/null +++ b/config-archive/etc/eselect/postgresql/slots/9.1/server.1 @@ -0,0 +1 @@ +postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.1.1" diff --git a/config-archive/etc/eselect/postgresql/slots/9.1/server.dist b/config-archive/etc/eselect/postgresql/slots/9.1/server.dist index 7a0a9c0f..a02e0871 100644 --- a/config-archive/etc/eselect/postgresql/slots/9.1/server.dist +++ b/config-archive/etc/eselect/postgresql/slots/9.1/server.dist @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.1.2-r2" +postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.1.3" diff --git a/config-archive/etc/init.d/alsasound b/config-archive/etc/init.d/alsasound new file mode 100755 index 00000000..6d49375b --- /dev/null +++ b/config-archive/etc/init.d/alsasound @@ -0,0 +1,218 @@ +#!/sbin/runscript +# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsasound.initd-r4,v 1.2 2011/10/23 15:59:07 polynomial-c Exp $ +# Copyright 1999-2011 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +alsastatedir=/var/lib/alsa +alsascrdir=/etc/alsa.d + +extra_commands="save restore" + +depend() { + need localmount + after bootmisc modules isapnp coldplug hotplug +} + +load_modules() { + # List of drivers for each card. + local DRIVERS="$(modprobe -c | sed -n -e 's/^alias \(snd-card-[[:digit:]]\+\) .*/\1/p')" + + # Fall back on the automated aliases if we don't have ALSA configured properly... + if [ -z "${DRIVERS}" ] && \ + ( [ ! -r /proc/asound/cards ] || grep -q ' no soundcards ' /proc/asound/cards 2>/dev/null ) ; then + ewarn "Could not detect custom ALSA settings. Loading all detected alsa drivers." + DRIVERS="$(modprobe -c | sed -n -e '/^alias pci:.* snd.*/ s/^alias pci:[^ ]* \(.*\)/\1/p' | sort | uniq)" + if [ -z "${DRIVERS}" ] ; then + eerror "Unable to find any ALSA drivers. Have you compiled alsa-drivers correctly?" + fi + fi + + if [ "${ENABLE_OSS_EMUL}" = "yes" ] ; then + DRIVERS="${DRIVERS} $(modprobe -l | sed -n -e '/snd.*oss/ s:.*\/\([[:alnum:]_-]\+\).ko:\1:p')" + fi + + # We want to ensure snd-seq is loaded as it is needed for things like + # timidity even if we don't use a real sequencer. + DRIVERS="${DRIVERS} $(modprobe -l | sed -n -e '/snd.seq\./ s:.*\/\([[:alnum:]_-]\+\).ko:\1:p')" + + # We want to ensure snd-ioctl32 is loaded as it is needed for 32bit + # compatibility + DRIVERS="${DRIVERS} $(modprobe -l | sed -n -e '/snd.ioctl32\./ s:.*\/\([[:alnum:]_-]\+\).ko:\1:p')" + + local DRIVER= DMOD= + for DRIVER in ${DRIVERS} ; do + [ "${DRIVER}" = "off" ] && continue + DMOD="$(echo "${DRIVER}" | sed -e 's/-/_/g')" + if ! grep -q "^${DMOD} " /proc/modules ; then + ebegin "Loading: ${DRIVER}" + modprobe ${DRIVER} + eend $? + fi + done + + if [ -f /proc/asound/seq/drivers ] ; then + local SEQUENCERS="$(sed -n -e 's/\([^,]*\),empty,.*/\1/p' /proc/asound/seq/drivers)" + local SEQUENCER + for SEQUENCER in ${SEQUENCERS} ; do + DMOD="$(echo "${SEQUENCER}" | sed -e 's/-/_/g')" + if ! grep -q "^${DMOD} " /proc/modules ; then + ebegin "Loading: ${SEQUENCER}" + modprobe ${SEQUENCER} + eend $? + fi + done + fi + + for DRIVER in ${DRIVERS} + do + local TMP=${DRIVER##snd-} + TMP=${TMP##snd_} + if [ -x "${alsascrdir}/${TMP}" ] ; then + ebegin "Running: ${alsascrdir}/${TMP}" + "${alsascrdir}/${TMP}" + eend $? + fi + done + + if [ ! -d /proc/asound ] || grep -q ' no soundcards ' /proc/asound/cards ; then + eerror "ERROR: Failed to load necessary drivers" + return 1 + fi +} + +unload_modules_24() { + local LOADED_MODULES="$(lsmod | sed -n -e 's/^\(snd[^ ]*\) .*/\1/p')" + local MODULE + for MODULE in ${LOADED_MODULES} ; do + rmmod "${MODULE}" + done + rmmod soundcore 2>/dev/null + rmmod gameport 2>/dev/null + + lsmod | grep -vq '^snd' +} + +unload_modules_recursive() { + local revdeps="$(lsmod | sed -n -e "s/,/ /g" -e "s/^$1 *[0-9]* *[0-9]* \(.*\)/\1/p")" + + for module in ${revdeps} ; do + unload_modules_recursive "${module}" + done + + vebegin "Unloading: $1" + rmmod --wait "$1" + veend $? +} + +unload_modules_26() { + # First of all, remove the snd module and all the modules depending + # on it, this should remove already most of ALSA modules. + lsmod | grep -q "^snd[[:space:]]" && unload_modules_recursive snd + + # Then find the remaining ones, and handle them too. + for module in $(lsmod | sed -n -e 's/^\(snd[^ ]*\) .*/\1/p'); do + unload_modules_recursive "${module}" + done + + lsmod | grep -vq "^snd" +} + +terminate() { + # + # Kill processes holding open sound devices + # + # DEVS=`find /dev/ -follow -type c -maxdepth 1 -print 2>/dev/null | xargs ls -dils | grep "1*1[46]," | cut -d: -f2 | cut -d" " -f2; echo /proc/asound/dev/*` + local ossdevs="/dev/admmidi* /dev/adsp* /dev/amidi* /dev/audio* /dev/dmfm* \ + /dev/dmmidi* /dev/dsp* /dev/dspW* /dev/midi0* /dev/mixer* /dev/music \ + /dev/patmgr* /dev/sequencer* /dev/sndstat" + local alsadevs="/proc/asound/dev/* /dev/sound/* /dev/snd/*" + fuser -k ${ossdevs} ${alsadevs} >/dev/null 2>/dev/null + + # remove all sequencer connections if any + [ -f /proc/asound/seq/clients ] && type aconnect >/dev/null 2>/dev/null && aconnect --removeall +} + +restore() { + ebegin "Restoring Mixer Levels" + + if [ ! -r "${alsastatedir}/asound.state" ] ; then + ewarn "No mixer config in ${alsastatedir}/asound.state, you have to unmute your card!" + eend 0 + return 0 + fi + + local cards="$(sed -n -e 's/ *\([[:digit:]]*\) .*/\1/p' /proc/asound/cards)" + local CARDNUM + for cardnum in ${cards}; do + [ -e /dev/snd/controlC${cardnum} ] || sleep 2 + [ -e /dev/snd/controlC${cardnum} ] || sleep 2 + [ -e /dev/snd/controlC${cardnum} ] || sleep 2 + [ -e /dev/snd/controlC${cardnum} ] || sleep 2 + alsactl -f "${alsastatedir}/asound.state" restore ${cardnum} \ + || ewarn "Errors while restoring defaults, ignoring" + done + + for ossfile in "${alsastatedir}"/oss/card*_pcm* ; do + [ -e "${ossfile}" ] || continue + # We use cat because I'm not sure if cp works properly on /proc + local procfile=${ossfile##${alsastatedir}/oss} + procfile="$(echo "${procfile}" | sed -e 's,_,/,g')" + if [ -e /proc/asound/"${procfile}"/oss ] ; then + cat "${ossfile}" > /proc/asound/"${procfile}"/oss + fi + done + + eend 0 +} + +save() { + ebegin "Storing ALSA Mixer Levels" + + mkdir -p "${alsastatedir}" + if ! alsactl -f "${alsastatedir}/asound.state" store; then + eerror "Error saving levels." + eend 1 + return 1 + fi + + for ossfile in /proc/asound/card*/pcm*/oss; do + [ -e "${ossfile}" ] || continue + local device=${ossfile##/proc/asound/} ; device=${device%%/oss} + device="$(echo "${device}" | sed -e 's,/,_,g')" + mkdir -p "${alsastatedir}/oss/" + cp "${ossfile}" "${alsastatedir}/oss/${device}" + done + + eend 0 +} + +start() { + if [ -f /proc/modules ] && [ "${LOAD_ON_START}" = "yes" ]; then + ebegin "Loading ALSA modules" + eindent + load_modules + eoutdent + eend $? || return 1 + fi + + if [ ! -d /proc/asound ]; then + eerror "ALSA failed to load." + eend 1 + return 1 + elif [ "${RESTORE_ON_START}" = "yes" ]; then + restore + fi + + return 0 +} + +stop() { + if [ ! -d /proc/asound ] ; then + eerror "ALSA is not loaded" + return 0 + fi + + [ "${SAVE_ON_STOP}" = "yes" ] && save + + return 0 +} diff --git a/config-archive/etc/init.d/alsasound.dist b/config-archive/etc/init.d/alsasound.dist new file mode 100755 index 00000000..e3c8dd90 --- /dev/null +++ b/config-archive/etc/init.d/alsasound.dist @@ -0,0 +1,83 @@ +#!/sbin/runscript +# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsasound.initd-r5,v 1.1 2012/02/20 09:03:53 chainsaw Exp $ +# Copyright 1999-2012 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +alsastatedir=/var/lib/alsa +alsascrdir=/etc/alsa.d + +extra_commands="save restore" + +depend() { + need localmount + after bootmisc modules isapnp coldplug hotplug +} + +restore() { + ebegin "Restoring Mixer Levels" + + if [ ! -r "${alsastatedir}/asound.state" ] ; then + ewarn "No mixer config in ${alsastatedir}/asound.state, you have to unmute your card!" + eend 0 + return 0 + fi + + local cards="$(sed -n -e 's/ *\([[:digit:]]*\) .*/\1/p' /proc/asound/cards)" + local CARDNUM + for cardnum in ${cards}; do + [ -e /dev/snd/controlC${cardnum} ] || sleep 2 + [ -e /dev/snd/controlC${cardnum} ] || sleep 2 + [ -e /dev/snd/controlC${cardnum} ] || sleep 2 + [ -e /dev/snd/controlC${cardnum} ] || sleep 2 + alsactl -I -f "${alsastatedir}/asound.state" restore ${cardnum} \ + || ewarn "Errors while restoring defaults, ignoring" + done + + for ossfile in "${alsastatedir}"/oss/card*_pcm* ; do + [ -e "${ossfile}" ] || continue + # We use cat because I'm not sure if cp works properly on /proc + local procfile=${ossfile##${alsastatedir}/oss} + procfile="$(echo "${procfile}" | sed -e 's,_,/,g')" + if [ -e /proc/asound/"${procfile}"/oss ] ; then + cat "${ossfile}" > /proc/asound/"${procfile}"/oss + fi + done + + eend 0 +} + +save() { + ebegin "Storing ALSA Mixer Levels" + + mkdir -p "${alsastatedir}" + if ! alsactl -f "${alsastatedir}/asound.state" store; then + eerror "Error saving levels." + eend 1 + return 1 + fi + + for ossfile in /proc/asound/card*/pcm*/oss; do + [ -e "${ossfile}" ] || continue + local device=${ossfile##/proc/asound/} ; device=${device%%/oss} + device="$(echo "${device}" | sed -e 's,/,_,g')" + mkdir -p "${alsastatedir}/oss/" + cp "${ossfile}" "${alsastatedir}/oss/${device}" + done + + eend 0 +} + +start() { + if [ "${RESTORE_ON_START}" = "yes" ]; then + restore + fi + + return 0 +} + +stop() { + if [ "${SAVE_ON_STOP}" = "yes" ]; then + save + fi + return 0 +} diff --git a/config-archive/etc/init.d/dbus b/config-archive/etc/init.d/dbus new file mode 100755 index 00000000..502f40fd --- /dev/null +++ b/config-archive/etc/init.d/dbus @@ -0,0 +1,51 @@ +#!/sbin/runscript +# Copyright 1999-2011 Gentoo Foundation +# Distributed under the terms of the GNU General Public License, v2 or later +# $Header: /var/cvsroot/gentoo-x86/sys-apps/dbus/files/dbus.init-1.0,v 1.5 2011/09/23 12:45:03 polynomial-c Exp $ + +extra_started_commands="reload" + +depend() { + need localmount + after bootmisc +} + +start() { + ebegin "Starting D-BUS system messagebus" + + /usr/bin/dbus-uuidgen --ensure + + # We need to test if /var/run/dbus exists, since script will fail if it does not + [ ! -e /var/run/dbus ] && mkdir /var/run/dbus + + start-stop-daemon --start --pidfile /var/run/dbus.pid --exec /usr/bin/dbus-daemon -- --system + eend $? +} + +stop() { + local retval + + ebegin "Stopping D-BUS system messagebus" + + start-stop-daemon --stop --pidfile /var/run/dbus.pid + retval=$? + + eend ${retval} + + [ -S /var/run/dbus/system_bus_socket ] && rm -f /var/run/dbus/system_bus_socket + + return ${retval} +} + +reload() { + local retval + + ebegin "Reloading D-BUS messagebus config" + + /usr/bin/dbus-send --print-reply --system --type=method_call \ + --dest=org.freedesktop.DBus \ + / org.freedesktop.DBus.ReloadConfig > /dev/null + retval=$? + eend ${retval} + return ${retval} +} diff --git a/config-archive/etc/init.d/dbus.dist b/config-archive/etc/init.d/dbus.dist new file mode 100755 index 00000000..65271f69 --- /dev/null +++ b/config-archive/etc/init.d/dbus.dist @@ -0,0 +1,50 @@ +#!/sbin/runscript +# Copyright 1999-2011 Gentoo Foundation +# Distributed under the terms of the GNU General Public License, v2 or later +# $Header: /var/cvsroot/gentoo-x86/sys-apps/dbus/files/dbus.initd,v 1.1 2011/11/05 13:56:10 ssuominen Exp $ + +extra_started_commands="reload" + +depend() { + need localmount + after bootmisc +} + +start() { + ebegin "Starting D-BUS system messagebus" + /usr/bin/dbus-uuidgen --ensure=/etc/machine-id + + # We need to test if /var/run/dbus exists, since script will fail if it does not + [ ! -e /var/run/dbus ] && mkdir /var/run/dbus + + start-stop-daemon --start --pidfile /var/run/dbus.pid --exec /usr/bin/dbus-daemon -- --system + eend $? +} + +stop() { + local retval + + ebegin "Stopping D-BUS system messagebus" + + start-stop-daemon --stop --pidfile /var/run/dbus.pid + retval=$? + + eend ${retval} + + [ -S /var/run/dbus/system_bus_socket ] && rm -f /var/run/dbus/system_bus_socket + + return ${retval} +} + +reload() { + local retval + + ebegin "Reloading D-BUS messagebus config" + + /usr/bin/dbus-send --print-reply --system --type=method_call \ + --dest=org.freedesktop.DBus \ + / org.freedesktop.DBus.ReloadConfig > /dev/null + retval=$? + eend ${retval} + return ${retval} +} diff --git a/cups/._cfg0000_cups-pdf.conf b/cups/._cfg0000_cups-pdf.conf deleted file mode 100644 index 79a37692..00000000 --- a/cups/._cfg0000_cups-pdf.conf +++ /dev/null @@ -1,287 +0,0 @@ -# cups-pdf.conf -- CUPS Backend Configuration (version 2.6.1, 2011-10-04) -# 18.09.2005, Volker C. Behr -# Experimentelle Physik V, Universitaet Wuerzburg -# behr@physik.uni-wuerzburg.de -# http://www.cups-pdf.de -# -# -# This code may be freely distributed as long as this header -# is preserved. Changes to the code should be clearly indicated. -# -# This code is distributed under the GPL. -# (http://www.gnu.org/copyleft/gpl.html) -# -# For more detailed licensing information see cups-pdf.c in the -# corresponding version number. - -########################################################################### -# # -# This is the configuration file for CUPS-PDF. Values that are not set in # -# here will use the defaults. Changes take effect immediately without the # -# need for restarting any services. # -# # -# Take care not to add whitespaces at the end of a line! # -# # -########################################################################### - - -########################################################################### -# # -# Path Settings # -# # -########################################################################### - -### Key: Out -## CUPS-PDF output directory -## special qualifiers: -## ${HOME} will be expanded to the user's home directory -## ${USER} will be expanded to the user name -## in case it is an NFS export make sure it is exported without -## root_squash! -### Default: /var/spool/cups-pdf/${USER} - -#Out /var/spool/cups-pdf/${USER} - -### Key: AnonDirName -## ABSOLUTE path for anonymously created PDF files -## if anonymous access is disabled this setting has no effect -### Default: /var/spool/cups-pdf/ANONYMOUS - -#AnonDirName /var/spool/cups-pdf/ANONYMOUS - -### Key: Spool -## CUPS-PDF spool directory - make sure there is no user 'SPOOL' on your -## system or change the path -### Default: /var/spool/cups-pdf/SPOOL - -#Spool /var/spool/cups-pdf/SPOOL - - -########################################################################### -# # -# Filename Settings # -# # -########################################################################### - -### Key: Truncate -## truncate long filenames to a maximum of characters -## this does not consider the full path to the output but only the filename -## without the .pdf-extension or a job-id prefix (see 'Label') -## the minimal value is 8 -### Default: 64 - -#Truncate 64 - -### Key: Cut -## removing file name extensions before appending .pdf to output -## extensions will only be removed if _both_ the following criteria are met: -## - the extension (w/o the dot) is not longer than characters -## - the remaining filename has a minimal length of 1 character -## set Cut to -1 in order to disable cutting -## recommended values: pure UNIX environment : -1 -## mixed environments : 3 -### Default: 3 - -#Cut 3 - -### Key: Label -## label all jobs with a unique job-id in order to avoid overwriting old -## files in case new ones with identical names are created; always true for -## untitled documents -## 0: label untitled documents only -## 1: label all documents with a preceeding "job_#-" -## 2: label all documents with a tailing "-job_#" -### Default: 0 - -#Label 0 - -### Key: TitlePref -## where to look first for a title when creating the output filename -## (title in PS file or title on commandline): -## 0: prefer title from %Title statement in the PS file -## 1: prefer title passed via commandline -### Default: 0 - -#TitlePref 0 - - -########################################################################### -# # -# User Settings # -# # -########################################################################### - -### Key: AnonUser -## uid for anonymous PDF creation (this might be a security issue) -## this setting has no influence on AnonDirName (see there) -## set this to an empty value to disable anonymous -### Default: nobody - -#AnonUser nobody - -### Key: LowerCase -## This options allows to check user names given to CUPS-PDF additionally -## against their lower case variants. This is necessary since in some -## Windows environments only upper case user names are passed. Usually UNIX -## user names are all lower case and it is save to use this option -## but be aware that it can lead to mis-identifications in case -## you have user names that differ only in upper/lower case. -## check only against user name as passed to CUPS : 0 -## check additionally against lower case user name : 1 -### Default: 1 - -#LowerCase 1 - -### Key: UserPrefix -## some installations require a domain prefix added to the user name -## leave empty for no prefix -### Default: - -#UserPrefix - -### Key: DirPrefix -## if a prefix was defined above this switch toggels whether to include -## the prefix in the output directory's name (if not $HOME) or not -## 0: do not include, 1: include -### Default: 0 - -#DirPrefix 0 - -### Key: RemovePrefix -## some installation pass usernames with a prefix (usually a domain name) -## if you do not want this prefix to be used by the ${USER} variable for -## output directories put the part which is to be cut here -### Default: - -#RemovePrefix - - -########################################################################### -# # -# Security Settings # -# # -########################################################################### - -### Key: AnonUMask -## umask for anonymous output -## these are the _inverse_ permissions to be granted -### Default: 0000 - -#AnonUMask 0000 - -### Key: UserUMask -## umask for user output of known users -## changing this can introduce security leaks if confidential -## information is processed! -### Default: 0077 - -#UserUMask 0077 - -### Key: Grp -## group cups-pdf is supposed to run as - this will also be the gid for all -## created directories and log files -### Default: lp - -#Grp lp - - -########################################################################### -# # -# Log Settings # -# # -########################################################################### - -### Key: Log -## CUPS-PDF log directory -## set this to an empty value to disable all logging -### Default: /var/log/cups - -#Log /var/log/cups - -### Key: LogType -## log-mode -## 1: errors -## 2: status (i.e. activity) -## 4: debug - this will generate a lot of log-output! -## add up values to combine options, i.e. 7 is full logging -## if logging is disabled these setting have no effect -### Default: 3 - -#LogType 3 - - -########################################################################### -# # -# PDF Conversion Settings # -# # -########################################################################### - -### Key: GhostScript -## location of GhostScript binary (gs) -## MacOSX: for using pstopdf (recommended) set this to /usr/bin/pstopdf -## or its proper location on your system -### Default: /usr/bin/gs - -#GhostScript /usr/bin/gs - -### Key: GSTmp -## location of temporary files during GhostScript operation -## this must be user-writable like /var/tmp or /tmp ! -### Default: /var/tmp - -#GSTmp /var/tmp - -### Key: GSCall -## command line for calling GhostScript (!!! DO NOT USE NEWLINES !!!) -## MacOSX: for using pstopdf set this to %s %s -o %s %s -### Default: %s -q -dCompatibilityLevel=%s -dNOPAUSE -dBATCH -dSAFER -sDEVICE=pdfwrite -sOutputFile="%s" -dAutoRotatePages=/PageByPage -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -dPDFSETTINGS=/prepress -c .setpdfwrite -f %s - -#GSCall %s -q -dCompatibilityLevel=%s -dNOPAUSE -dBATCH -dSAFER -sDEVICE=pdfwrite -sOutputFile="%s" -dAutoRotatePages=/PageByPage -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -dPDFSETTINGS=/prepress -c .setpdfwrite -f %s - -### Key: PDFVer -## PDF version to be created - can be "1.5", "1.4", "1.3" or "1.2" -## MacOSX: for using pstopdf set this to an empty value -### Default: 1.4 - -#PDFVer 1.4 - -### Key: PostProcessing -## postprocessing script that will be called after the creation of the PDF -## as arguments the filename of the PDF, the username as determined by -## CUPS-PDF and the one as given to CUPS-PDF will be passed -## the script will be called with user privileges -## set this to an empty value to use no postprocessing -### Default: - -#PostProcessing - - -########################################################################### -# # -# Experimental Settings # -# These settings activate experimental options. If you decide to use # -# them I would appreciate any feedback - including an 'ok' if they # -# work as expected - so I can eventually put them into the non- # -# experimental sections. # -# # -########################################################################### - -### Key: DecodeHexStrings -## this option will try to decode hex strings in the title to allow -## internationalized titles -## (have a look at contrib/pstitleconv for a suitable filter for data -## from Windows clients) -## 0: disable, 1: enable -### Default: 0 - -#DecodeHexStrings 0 - -### Key: FixNewlines -## this option will try to fix various unusal line delimiters (e.g. -## form feeds) -## especially useful when using non-Linux-generated files -## 0: disable, 1: enable -### Default: 0 - -#FixNewlines 0 - diff --git a/cups/cups-pdf.conf b/cups/cups-pdf.conf index 895fe9b3..79a37692 100644 --- a/cups/cups-pdf.conf +++ b/cups/cups-pdf.conf @@ -1,8 +1,8 @@ -# cups-pdf.conf -- CUPS Backend Configuration (version 2.4.8, 2008-06-22) +# cups-pdf.conf -- CUPS Backend Configuration (version 2.6.1, 2011-10-04) # 18.09.2005, Volker C. Behr -# Exp. Physik V, Uni Wuerzburg -# vrbehr@cip.physik.uni-wuerzburg.de -# http://cip.physik.uni-wuerzburg.de/~vrbehr/cups-pdf +# Experimentelle Physik V, Universitaet Wuerzburg +# behr@physik.uni-wuerzburg.de +# http://www.cups-pdf.de # # # This code may be freely distributed as long as this header @@ -63,6 +63,15 @@ # # ########################################################################### +### Key: Truncate +## truncate long filenames to a maximum of characters +## this does not consider the full path to the output but only the filename +## without the .pdf-extension or a job-id prefix (see 'Label') +## the minimal value is 8 +### Default: 64 + +#Truncate 64 + ### Key: Cut ## removing file name extensions before appending .pdf to output ## extensions will only be removed if _both_ the following criteria are met: @@ -79,7 +88,9 @@ ## label all jobs with a unique job-id in order to avoid overwriting old ## files in case new ones with identical names are created; always true for ## untitled documents -## 0: label untitled documents only, 1: label all documents +## 0: label untitled documents only +## 1: label all documents with a preceeding "job_#-" +## 2: label all documents with a tailing "-job_#" ### Default: 0 #Label 0 @@ -101,7 +112,8 @@ ########################################################################### ### Key: AnonUser -## user for anonymous PDF creation (this might be a security issue) +## uid for anonymous PDF creation (this might be a security issue) +## this setting has no influence on AnonDirName (see there) ## set this to an empty value to disable anonymous ### Default: nobody @@ -255,7 +267,7 @@ ########################################################################### ### Key: DecodeHexStrings -## this option will try to decode hex strings in the title to allow +## this option will try to decode hex strings in the title to allow ## internationalized titles ## (have a look at contrib/pstitleconv for a suitable filter for data ## from Windows clients) @@ -263,3 +275,13 @@ ### Default: 0 #DecodeHexStrings 0 + +### Key: FixNewlines +## this option will try to fix various unusal line delimiters (e.g. +## form feeds) +## especially useful when using non-Linux-generated files +## 0: disable, 1: enable +### Default: 0 + +#FixNewlines 0 + diff --git a/cups/printers.conf b/cups/printers.conf index d094ea3e..dc36575b 100644 --- a/cups/printers.conf +++ b/cups/printers.conf @@ -1,5 +1,5 @@ # Printer configuration file for CUPS v1.4.8 -# Written by cupsd on 2012-03-12 07:10 +# Written by cupsd on 2012-03-12 18:32 # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING Info Kyocera FS-1020D diff --git a/cups/printers.conf.O b/cups/printers.conf.O index f1e19805..d094ea3e 100644 --- a/cups/printers.conf.O +++ b/cups/printers.conf.O @@ -1,5 +1,5 @@ # Printer configuration file for CUPS v1.4.8 -# Written by cupsd on 2012-03-11 10:35 +# Written by cupsd on 2012-03-12 07:10 # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING Info Kyocera FS-1020D diff --git a/eselect/postgresql/slots/9.1/._cfg0000_base b/eselect/postgresql/slots/9.1/._cfg0000_base deleted file mode 100644 index 34425d9b..00000000 --- a/eselect/postgresql/slots/9.1/._cfg0000_base +++ /dev/null @@ -1 +0,0 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.1.3" diff --git a/eselect/postgresql/slots/9.1/._cfg0000_docs b/eselect/postgresql/slots/9.1/._cfg0000_docs deleted file mode 100644 index 4b0d9a89..00000000 --- a/eselect/postgresql/slots/9.1/._cfg0000_docs +++ /dev/null @@ -1 +0,0 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.1.3" diff --git a/eselect/postgresql/slots/9.1/._cfg0000_server b/eselect/postgresql/slots/9.1/._cfg0000_server deleted file mode 100644 index a02e0871..00000000 --- a/eselect/postgresql/slots/9.1/._cfg0000_server +++ /dev/null @@ -1 +0,0 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.1.3" diff --git a/eselect/postgresql/slots/9.1/base b/eselect/postgresql/slots/9.1/base index 479bd41d..34425d9b 100644 --- a/eselect/postgresql/slots/9.1/base +++ b/eselect/postgresql/slots/9.1/base @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.1.2" +postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.1.3" diff --git a/eselect/postgresql/slots/9.1/docs b/eselect/postgresql/slots/9.1/docs index 8cec4d40..4b0d9a89 100644 --- a/eselect/postgresql/slots/9.1/docs +++ b/eselect/postgresql/slots/9.1/docs @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.1.2" +postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.1.3" diff --git a/eselect/postgresql/slots/9.1/server b/eselect/postgresql/slots/9.1/server index 7a0a9c0f..a02e0871 100644 --- a/eselect/postgresql/slots/9.1/server +++ b/eselect/postgresql/slots/9.1/server @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.1.2-r2" +postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.1.3" diff --git a/init.d/._cfg0000_alsasound b/init.d/._cfg0000_alsasound deleted file mode 100755 index e3c8dd90..00000000 --- a/init.d/._cfg0000_alsasound +++ /dev/null @@ -1,83 +0,0 @@ -#!/sbin/runscript -# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsasound.initd-r5,v 1.1 2012/02/20 09:03:53 chainsaw Exp $ -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -alsastatedir=/var/lib/alsa -alsascrdir=/etc/alsa.d - -extra_commands="save restore" - -depend() { - need localmount - after bootmisc modules isapnp coldplug hotplug -} - -restore() { - ebegin "Restoring Mixer Levels" - - if [ ! -r "${alsastatedir}/asound.state" ] ; then - ewarn "No mixer config in ${alsastatedir}/asound.state, you have to unmute your card!" - eend 0 - return 0 - fi - - local cards="$(sed -n -e 's/ *\([[:digit:]]*\) .*/\1/p' /proc/asound/cards)" - local CARDNUM - for cardnum in ${cards}; do - [ -e /dev/snd/controlC${cardnum} ] || sleep 2 - [ -e /dev/snd/controlC${cardnum} ] || sleep 2 - [ -e /dev/snd/controlC${cardnum} ] || sleep 2 - [ -e /dev/snd/controlC${cardnum} ] || sleep 2 - alsactl -I -f "${alsastatedir}/asound.state" restore ${cardnum} \ - || ewarn "Errors while restoring defaults, ignoring" - done - - for ossfile in "${alsastatedir}"/oss/card*_pcm* ; do - [ -e "${ossfile}" ] || continue - # We use cat because I'm not sure if cp works properly on /proc - local procfile=${ossfile##${alsastatedir}/oss} - procfile="$(echo "${procfile}" | sed -e 's,_,/,g')" - if [ -e /proc/asound/"${procfile}"/oss ] ; then - cat "${ossfile}" > /proc/asound/"${procfile}"/oss - fi - done - - eend 0 -} - -save() { - ebegin "Storing ALSA Mixer Levels" - - mkdir -p "${alsastatedir}" - if ! alsactl -f "${alsastatedir}/asound.state" store; then - eerror "Error saving levels." - eend 1 - return 1 - fi - - for ossfile in /proc/asound/card*/pcm*/oss; do - [ -e "${ossfile}" ] || continue - local device=${ossfile##/proc/asound/} ; device=${device%%/oss} - device="$(echo "${device}" | sed -e 's,/,_,g')" - mkdir -p "${alsastatedir}/oss/" - cp "${ossfile}" "${alsastatedir}/oss/${device}" - done - - eend 0 -} - -start() { - if [ "${RESTORE_ON_START}" = "yes" ]; then - restore - fi - - return 0 -} - -stop() { - if [ "${SAVE_ON_STOP}" = "yes" ]; then - save - fi - return 0 -} diff --git a/init.d/._cfg0000_dbus b/init.d/._cfg0000_dbus deleted file mode 100755 index 65271f69..00000000 --- a/init.d/._cfg0000_dbus +++ /dev/null @@ -1,50 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2011 Gentoo Foundation -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo-x86/sys-apps/dbus/files/dbus.initd,v 1.1 2011/11/05 13:56:10 ssuominen Exp $ - -extra_started_commands="reload" - -depend() { - need localmount - after bootmisc -} - -start() { - ebegin "Starting D-BUS system messagebus" - /usr/bin/dbus-uuidgen --ensure=/etc/machine-id - - # We need to test if /var/run/dbus exists, since script will fail if it does not - [ ! -e /var/run/dbus ] && mkdir /var/run/dbus - - start-stop-daemon --start --pidfile /var/run/dbus.pid --exec /usr/bin/dbus-daemon -- --system - eend $? -} - -stop() { - local retval - - ebegin "Stopping D-BUS system messagebus" - - start-stop-daemon --stop --pidfile /var/run/dbus.pid - retval=$? - - eend ${retval} - - [ -S /var/run/dbus/system_bus_socket ] && rm -f /var/run/dbus/system_bus_socket - - return ${retval} -} - -reload() { - local retval - - ebegin "Reloading D-BUS messagebus config" - - /usr/bin/dbus-send --print-reply --system --type=method_call \ - --dest=org.freedesktop.DBus \ - / org.freedesktop.DBus.ReloadConfig > /dev/null - retval=$? - eend ${retval} - return ${retval} -} diff --git a/init.d/alsasound b/init.d/alsasound index 6d49375b..e3c8dd90 100755 --- a/init.d/alsasound +++ b/init.d/alsasound @@ -1,6 +1,6 @@ #!/sbin/runscript -# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsasound.initd-r4,v 1.2 2011/10/23 15:59:07 polynomial-c Exp $ -# Copyright 1999-2011 Gentoo Foundation +# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsasound.initd-r5,v 1.1 2012/02/20 09:03:53 chainsaw Exp $ +# Copyright 1999-2012 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 alsastatedir=/var/lib/alsa @@ -13,125 +13,6 @@ depend() { after bootmisc modules isapnp coldplug hotplug } -load_modules() { - # List of drivers for each card. - local DRIVERS="$(modprobe -c | sed -n -e 's/^alias \(snd-card-[[:digit:]]\+\) .*/\1/p')" - - # Fall back on the automated aliases if we don't have ALSA configured properly... - if [ -z "${DRIVERS}" ] && \ - ( [ ! -r /proc/asound/cards ] || grep -q ' no soundcards ' /proc/asound/cards 2>/dev/null ) ; then - ewarn "Could not detect custom ALSA settings. Loading all detected alsa drivers." - DRIVERS="$(modprobe -c | sed -n -e '/^alias pci:.* snd.*/ s/^alias pci:[^ ]* \(.*\)/\1/p' | sort | uniq)" - if [ -z "${DRIVERS}" ] ; then - eerror "Unable to find any ALSA drivers. Have you compiled alsa-drivers correctly?" - fi - fi - - if [ "${ENABLE_OSS_EMUL}" = "yes" ] ; then - DRIVERS="${DRIVERS} $(modprobe -l | sed -n -e '/snd.*oss/ s:.*\/\([[:alnum:]_-]\+\).ko:\1:p')" - fi - - # We want to ensure snd-seq is loaded as it is needed for things like - # timidity even if we don't use a real sequencer. - DRIVERS="${DRIVERS} $(modprobe -l | sed -n -e '/snd.seq\./ s:.*\/\([[:alnum:]_-]\+\).ko:\1:p')" - - # We want to ensure snd-ioctl32 is loaded as it is needed for 32bit - # compatibility - DRIVERS="${DRIVERS} $(modprobe -l | sed -n -e '/snd.ioctl32\./ s:.*\/\([[:alnum:]_-]\+\).ko:\1:p')" - - local DRIVER= DMOD= - for DRIVER in ${DRIVERS} ; do - [ "${DRIVER}" = "off" ] && continue - DMOD="$(echo "${DRIVER}" | sed -e 's/-/_/g')" - if ! grep -q "^${DMOD} " /proc/modules ; then - ebegin "Loading: ${DRIVER}" - modprobe ${DRIVER} - eend $? - fi - done - - if [ -f /proc/asound/seq/drivers ] ; then - local SEQUENCERS="$(sed -n -e 's/\([^,]*\),empty,.*/\1/p' /proc/asound/seq/drivers)" - local SEQUENCER - for SEQUENCER in ${SEQUENCERS} ; do - DMOD="$(echo "${SEQUENCER}" | sed -e 's/-/_/g')" - if ! grep -q "^${DMOD} " /proc/modules ; then - ebegin "Loading: ${SEQUENCER}" - modprobe ${SEQUENCER} - eend $? - fi - done - fi - - for DRIVER in ${DRIVERS} - do - local TMP=${DRIVER##snd-} - TMP=${TMP##snd_} - if [ -x "${alsascrdir}/${TMP}" ] ; then - ebegin "Running: ${alsascrdir}/${TMP}" - "${alsascrdir}/${TMP}" - eend $? - fi - done - - if [ ! -d /proc/asound ] || grep -q ' no soundcards ' /proc/asound/cards ; then - eerror "ERROR: Failed to load necessary drivers" - return 1 - fi -} - -unload_modules_24() { - local LOADED_MODULES="$(lsmod | sed -n -e 's/^\(snd[^ ]*\) .*/\1/p')" - local MODULE - for MODULE in ${LOADED_MODULES} ; do - rmmod "${MODULE}" - done - rmmod soundcore 2>/dev/null - rmmod gameport 2>/dev/null - - lsmod | grep -vq '^snd' -} - -unload_modules_recursive() { - local revdeps="$(lsmod | sed -n -e "s/,/ /g" -e "s/^$1 *[0-9]* *[0-9]* \(.*\)/\1/p")" - - for module in ${revdeps} ; do - unload_modules_recursive "${module}" - done - - vebegin "Unloading: $1" - rmmod --wait "$1" - veend $? -} - -unload_modules_26() { - # First of all, remove the snd module and all the modules depending - # on it, this should remove already most of ALSA modules. - lsmod | grep -q "^snd[[:space:]]" && unload_modules_recursive snd - - # Then find the remaining ones, and handle them too. - for module in $(lsmod | sed -n -e 's/^\(snd[^ ]*\) .*/\1/p'); do - unload_modules_recursive "${module}" - done - - lsmod | grep -vq "^snd" -} - -terminate() { - # - # Kill processes holding open sound devices - # - # DEVS=`find /dev/ -follow -type c -maxdepth 1 -print 2>/dev/null | xargs ls -dils | grep "1*1[46]," | cut -d: -f2 | cut -d" " -f2; echo /proc/asound/dev/*` - local ossdevs="/dev/admmidi* /dev/adsp* /dev/amidi* /dev/audio* /dev/dmfm* \ - /dev/dmmidi* /dev/dsp* /dev/dspW* /dev/midi0* /dev/mixer* /dev/music \ - /dev/patmgr* /dev/sequencer* /dev/sndstat" - local alsadevs="/proc/asound/dev/* /dev/sound/* /dev/snd/*" - fuser -k ${ossdevs} ${alsadevs} >/dev/null 2>/dev/null - - # remove all sequencer connections if any - [ -f /proc/asound/seq/clients ] && type aconnect >/dev/null 2>/dev/null && aconnect --removeall -} - restore() { ebegin "Restoring Mixer Levels" @@ -148,7 +29,7 @@ restore() { [ -e /dev/snd/controlC${cardnum} ] || sleep 2 [ -e /dev/snd/controlC${cardnum} ] || sleep 2 [ -e /dev/snd/controlC${cardnum} ] || sleep 2 - alsactl -f "${alsastatedir}/asound.state" restore ${cardnum} \ + alsactl -I -f "${alsastatedir}/asound.state" restore ${cardnum} \ || ewarn "Errors while restoring defaults, ignoring" done @@ -187,19 +68,7 @@ save() { } start() { - if [ -f /proc/modules ] && [ "${LOAD_ON_START}" = "yes" ]; then - ebegin "Loading ALSA modules" - eindent - load_modules - eoutdent - eend $? || return 1 - fi - - if [ ! -d /proc/asound ]; then - eerror "ALSA failed to load." - eend 1 - return 1 - elif [ "${RESTORE_ON_START}" = "yes" ]; then + if [ "${RESTORE_ON_START}" = "yes" ]; then restore fi @@ -207,12 +76,8 @@ start() { } stop() { - if [ ! -d /proc/asound ] ; then - eerror "ALSA is not loaded" - return 0 + if [ "${SAVE_ON_STOP}" = "yes" ]; then + save fi - - [ "${SAVE_ON_STOP}" = "yes" ] && save - return 0 } diff --git a/init.d/dbus b/init.d/dbus index 502f40fd..65271f69 100755 --- a/init.d/dbus +++ b/init.d/dbus @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2011 Gentoo Foundation # Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo-x86/sys-apps/dbus/files/dbus.init-1.0,v 1.5 2011/09/23 12:45:03 polynomial-c Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-apps/dbus/files/dbus.initd,v 1.1 2011/11/05 13:56:10 ssuominen Exp $ extra_started_commands="reload" @@ -12,8 +12,7 @@ depend() { start() { ebegin "Starting D-BUS system messagebus" - - /usr/bin/dbus-uuidgen --ensure + /usr/bin/dbus-uuidgen --ensure=/etc/machine-id # We need to test if /var/run/dbus exists, since script will fail if it does not [ ! -e /var/run/dbus ] && mkdir /var/run/dbus