From: Frank Brehm Date: Sun, 14 Dec 2014 07:40:00 +0000 (+0100) Subject: Current state X-Git-Url: https://git.uhu-banane.org/?a=commitdiff_plain;h=62de7d80e23ffb920ad68eeb83013f5af415eca2;p=config%2Fbruni%2Fetc.git Current state --- diff --git a/ImageMagick-6/delegates.xml b/ImageMagick-6/delegates.xml index 77d1ae6b..855352e0 100644 --- a/ImageMagick-6/delegates.xml +++ b/ImageMagick-6/delegates.xml @@ -74,6 +74,8 @@ + + @@ -92,6 +94,7 @@ + @@ -100,9 +103,11 @@ - - + + + + @@ -116,12 +121,14 @@ - + - + + + diff --git a/UPower/UPower.conf b/UPower/UPower.conf index 31753cfd..4282948e 100644 --- a/UPower/UPower.conf +++ b/UPower/UPower.conf @@ -3,29 +3,6 @@ [UPower] -# This is the smallest amount of time that UPower gives to session and system -# processes after the suspend or hibernate request is given. -# If the session power management component uses AboutToSuspend() then the -# session process can only make this time larger than the value below, never -# smaller. -# -# Reducing this time means the suspend happens quicker, but might also not give -# some processes enough time to save state. -# -# default=1000 -SleepTimeout=1000 - -# This controls whether hibernate is allowed when using encrypted swap. -# -# default=true -AllowHibernateEncryptedSwap=true - -# This controls whether we want the powersave commands to be run when running -# on battery or plugging AC. -# -# default=true -RunPowersaveCommand=true - # Enable the Watts Up Pro device. # # The Watts Up Pro contains a generic FTDI USB device without a specific @@ -41,20 +18,74 @@ RunPowersaveCommand=true # default=false EnableWattsUpPro=false -# Poll the kernel for dock state changes. +# Don't poll the kernel for battery level changes. # -# Some drivers are still broken, and do not send out uvents when the -# connected state changes. +# Some hardware will send us battery level changes through +# events, rather than us having to poll for it. This option +# allows disabling polling for hardware that sends out events. # # default=false -PollDockDevices=false +NoPollBatteries=false # Do we ignore the lid state # # Some laptops are broken. The lid state is either inverted, or stuck # on or off. We can't do much to fix these problems, but this is a way # for users to make the laptop panel vanish and for programs like -# gnome-power-manager to not suspend on system startup. +# gnome-settings-daemon to not suspend on system startup. # # default=false IgnoreLid=false + +# Policy for warnings and action based on battery levels +# +# Whether battery percentage based policy should be used. The default +# is to use the time left, change to true to use the percentage, which +# should work around broken firmwares. +# default=false +UsePercentageForPolicy=false + +# When UsePercentageForPolicy is true, the levels at which UPower will +# consider the battery low, critical, or take action for the critical +# battery level. +# +# This will also be used for batteries which don't have time information +# such as that of peripherals. +# +# If any value is invalid, or not in descending order, the defaults +# will be used. +# +# Defaults: +# PercentageLow=10 +# PercentageCritical=3 +# PercentageAction=2 +PercentageLow=10 +PercentageCritical=3 +PercentageAction=2 + +# When UsePercentageForPolicy is false, the time remaining at which UPower +# will consider the battery low, critical, or take action for the critical +# battery level. +# +# If any value is invalid, or not in descending order, the defaults +# will be used. +# +# Defaults: +# TimeLow=1200 +# TimeCritical=300 +# TimeAction=120 +TimeLow=1200 +TimeCritical=300 +TimeAction=120 + +# The action to take when "TimeAction" or "PercentageAction" above has been +# reached for the batteries (UPS or laptop batteries) supplying the computer +# +# Possible values are: +# PowerOff +# Hibernate +# HybridSleep +# +# If HybridSleep isn't available, Hibernate will be used +# If Hibernate isn't available, PowerOff will be used +CriticalPowerAction=HybridSleep diff --git a/apache2/modules.d/00_apache_manual.conf b/apache2/modules.d/00_apache_manual.conf index 4f6ae4fb..71ae990f 100644 --- a/apache2/modules.d/00_apache_manual.conf +++ b/apache2/modules.d/00_apache_manual.conf @@ -2,10 +2,12 @@ # http://yourserver.example.com/manual/ # The documentation is always available at # http://httpd.apache.org/docs/2.2/ + + -AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apache-2.2.27/manual$1" +AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apache-2.2.27-r4/manual$1" - + Options Indexes AllowOverride None Order allow,deny @@ -22,5 +24,7 @@ AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apac ForceLanguagePriority Prefer Fallback + + # vim: ts=4 filetype=apache diff --git a/apache2/modules.d/00_default_settings.conf b/apache2/modules.d/00_default_settings.conf index 0fa43b2d..afa8d911 100644 --- a/apache2/modules.d/00_default_settings.conf +++ b/apache2/modules.d/00_default_settings.conf @@ -118,8 +118,7 @@ LogLevel warn # negotiated documents. The MultiViews Options can be used for the # same purpose, but it is much slower. # -# To add files to that list use AddDirectoryIndex in a custom config -# file. Do not change this entry unless you know what you are doing. +# Do not change this entry unless you know what you are doing. DirectoryIndex index.html index.html.var diff --git a/apache2/modules.d/00_mod_autoindex.conf b/apache2/modules.d/00_mod_autoindex.conf index ca2a1682..097410ad 100644 --- a/apache2/modules.d/00_mod_autoindex.conf +++ b/apache2/modules.d/00_mod_autoindex.conf @@ -1,4 +1,6 @@ + + # We include the /icons/ alias for FancyIndexed directory listings. If # you do not use FancyIndexing, you may comment this out. @@ -78,6 +80,7 @@ HeaderName HEADER.html # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + # vim: ts=4 filetype=apache diff --git a/apache2/modules.d/40_mod_ssl.conf b/apache2/modules.d/40_mod_ssl.conf index 3d0a0438..82df7606 100644 --- a/apache2/modules.d/40_mod_ssl.conf +++ b/apache2/modules.d/40_mod_ssl.conf @@ -58,6 +58,10 @@ SSLSessionCacheTimeout 300 # Configure the path to the mutual exclusion semaphore the SSL engine uses # internally for inter-process synchronization. SSLMutex file:/var/run/ssl_mutex + +## SSL Compression: +# Known to be vulnerable thus disabled by default (bug #507324). +SSLCompression off # vim: ts=4 filetype=apache diff --git a/apache2/vhosts.d/00_default_ssl_vhost.conf b/apache2/vhosts.d/00_default_ssl_vhost.conf index 98bfc2f3..bb395473 100644 --- a/apache2/vhosts.d/00_default_ssl_vhost.conf +++ b/apache2/vhosts.d/00_default_ssl_vhost.conf @@ -21,10 +21,22 @@ Listen 443 # Enable/Disable SSL for this virtual host. SSLEngine on + ## SSLProtocol: + # Don't use SSLv2 anymore as it's considered to be broken security-wise. + # Also disable SSLv3 as most modern browsers are capable of TLS. + SSLProtocol ALL -SSLv2 -SSLv3 + ## SSL Cipher Suite: # List the ciphers that the client is permitted to negotiate. # See the mod_ssl documentation for a complete list. - SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL + # This list of ciphers is recommended by mozilla and was stripped off + # its RC4 ciphers. (bug #506924) + SSLCipherSuite ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128:AES256:HIGH:!RC4:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK + + ## SSLHonorCipherOrder: + # Prefer the server's cipher preference order as the client may have a + # weak default order. + SSLHonorCipherOrder On ## Server Certificate: # Point SSLCertificateFile at a PEM encoded certificate. If the certificate diff --git a/bash/bashrc b/bash/bashrc index 856e9e4d..b52cbd59 100644 --- a/bash/bashrc +++ b/bash/bashrc @@ -25,7 +25,7 @@ shopt -s histappend # Change the window title of X terminals case ${TERM} in - xterm*|rxvt*|Eterm*|aterm|kterm|gnome*|interix) + xterm*|rxvt*|Eterm*|aterm|kterm|gnome*|interix|konsole*) PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"' ;; screen*) diff --git a/bluetooth/input.conf b/bluetooth/input.conf index abfb64f2..3e1d65aa 100644 --- a/bluetooth/input.conf +++ b/bluetooth/input.conf @@ -7,3 +7,7 @@ # Set idle timeout (in minutes) before the connection will # be disconnect (defaults to 0 for no timeout) #IdleTimeout=30 + +# Enable HID protocol handling in userspace input profile +# Defaults to false (HIDP handled in HIDP kernel module) +#UserspaceHID=true diff --git a/bluetooth/main.conf b/bluetooth/main.conf index a94274aa..d4d6ab09 100644 --- a/bluetooth/main.conf +++ b/bluetooth/main.conf @@ -46,3 +46,17 @@ # makes debug link keys valid only for the duration of the connection # that they were created for. #DebugKeys = false + +# Restricts all controllers to the specified transport. Default value +# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW). +# Possible values: "dual", "bredr", "le" +#ControllerMode = dual + +#[Policy] +# +# The ReconnectUUIDs defines the set of remote services that should try +# to be reconnected to in case of a link loss (link supervision +# timeout). The policy plugin should contain a sane set of values by +# default, but this list can be overridden here. By setting the list to +# empty the reconnection feature gets disabled. +#ReconnectUUIDs= diff --git a/colord.conf b/colord.conf deleted file mode 100644 index 81d7d5de..00000000 --- a/colord.conf +++ /dev/null @@ -1,44 +0,0 @@ -[colord] - -# This controls whether we search external volumes for color profiles. -# -# default=false -SearchVolumes=false - -# If we should create a dummy sensor for testing -# -# default=false -CreateDummySensor=false - -# If we should use SANE to add scanner and camera devices. -# -# If SANE support is installed then this will allow colord to manage -# all scanners that SANE can detect, including remote scanners. -# -# If this is disabled then colord will only detect locally connected -# scanners. -# -# default=false -UseSANE=false - -# If we should always use the XRandR name as the DeviceId -# -# If the user has two or more outputs attached with identical EDID data then -# the client tools cannot tell them apart. By setting this value the 'xrandr-' -# style device-id is always used and the monitors will show up as seporate -# instances. -# -# This does of course mean that the calibration is referenced to the xrandr -# output name, rather than the monitor itself. This means that if the monitor -# cables are swapped then the wrong profile would be used. -# -# default=false -AlwaysUseXrandrName=false - -# Known profiles are specific colorspaces that applications may request, -# e.g. 'adobe-rgb' or 'srgb'. -# This key sets up any manual overrides that are not automatically added -# using the profile dictionary metadata. -# -# default= -StandardSpaces= diff --git a/common-lisp/gentoo-init.lisp b/common-lisp/gentoo-init.lisp new file mode 100644 index 00000000..e1e424a7 --- /dev/null +++ b/common-lisp/gentoo-init.lisp @@ -0,0 +1,12 @@ +(in-package #:cl-user) + +#-(or cmu ccl ecl sbcl) +(let ((*compile-print* nil) + (*compile-verbose* nil) + #+cmu (ext:*gc-verbose* nil)) + (handler-bind ((warning #'muffle-warning)) + (load #p"/usr/share/common-lisp/source/asdf/build/asdf.lisp" + :print nil :verbose nil))) + +#+(or cmu ccl ecl sbcl) +(require :asdf) diff --git a/common-lisp/source-registry.conf b/common-lisp/source-registry.conf new file mode 100644 index 00000000..45e1fdfc --- /dev/null +++ b/common-lisp/source-registry.conf @@ -0,0 +1,5 @@ +;; -*- Mode: Lisp; -*- + +(:source-registry + (:directory "/usr/share/common-lisp/systems") + :inherit-configuration) diff --git a/conf.d/mysql b/conf.d/mysql index df4c3a46..953575b2 100644 --- a/conf.d/mysql +++ b/conf.d/mysql @@ -1,6 +1,6 @@ -# Copyright 1999-2011 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql-init-scripts/files/mysql-5.1.53-conf.d,v 1.2 2011/01/15 17:54:31 robbat2 Exp $ +# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql-init-scripts/files/conf.d-2.0,v 1.1 2014/08/21 03:08:13 grknight Exp $ # If you want a non-stock location for the config file, uncomment or update # either of these as needed. If you do use it, you must make sure that none of diff --git a/conf.d/named b/conf.d/named index 0450d5b6..477a4806 100644 --- a/conf.d/named +++ b/conf.d/named @@ -26,7 +26,7 @@ #CHROOT_NOCHECK=1 # Default pid file location -PIDFILE="${CHROOT}/var/run/named/named.pid" +PIDFILE="${CHROOT}/run/named/named.pid" # Scheduling priority: 19 is the lowest and -20 is the highest. # Default: 0 diff --git a/conf.d/postgresql-9.3 b/conf.d/postgresql-9.3 deleted file mode 100644 index f792cd88..00000000 --- a/conf.d/postgresql-9.3 +++ /dev/null @@ -1,58 +0,0 @@ -# Which port and socket to bind PostgreSQL -PGPORT="5432" - -# How long to wait for server to start in seconds -START_TIMEOUT=10 - -# NICE_QUIT ignores new connections and wait for clients to disconnect from -# server before shutting down. NICE_TIMEOUT in seconds determines how long to -# wait for this to succeed. -NICE_TIMEOUT=60 - -# Forecfully disconnect clients from server and shut down. This is performed -# after NICE_QUIT. Terminated client connections have their open transactions -# rolled back. -# Set RUDE_QUIT to "NO" to disable. RUDE_TIMEOUT in seconds. -RUDE_QUIT="YES" -RUDE_TIMEOUT=30 - -# If the server still fails to shutdown, you can force it to quit by setting -# this to YES and a recover-run will execute on the next startup. -# Set FORCE_QUIT to "YES" to enable. FORCE_TIMEOUT in seconds. -FORCE_QUIT="NO" -FORCE_TIMEOUT=2 - -# Extra options to run postmaster with, e.g.: -# -N is the maximal number of client connections -# -B is the number of shared buffers and has to be at least 2x the value for -N -# Please read the man-page to postmaster for more options. Many of these -# options can be set directly in the configuration file. -#PGOPTS="-N 512 -B 1024" - -# Pass extra environment variables. If you have to export environment variables -# for the database process, this can be done here. -# Don't forget to escape quotes. -#PG_EXTRA_ENV="PGPASSFILE=\"/path/to/.pgpass\"" - -############################################################################## -# -# The following values should not be arbitrarily changed. -# -# `emerge --config dev-db/postgresql-server:9.3' uses these values to -# determine where to create the data directory, where to place the -# configuration files, and any additional options to pass to initdb. -# -# The initscript also uses these variables to inform PostgreSQL where to find -# its data directory and configuration files. -# -############################################################################## - -# Location of configuration files -PGDATA="/etc/postgresql-9.3/" - -# Where the data directory is located/to be created -DATA_DIR="/var/lib/postgresql/9.3/data" - -# Additional options to pass to initdb. -# See `man initdb' for available options. -PG_INITDB_OPTS="--encoding=UTF8" diff --git a/conf.d/pydoc-3.4 b/conf.d/pydoc-3.4 new file mode 100644 index 00000000..7beefff8 --- /dev/null +++ b/conf.d/pydoc-3.4 @@ -0,0 +1,7 @@ +# /etc/init.d/pydoc.conf +# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.conf,v 1.3 2011/10/27 13:56:55 neurogeek Exp $ + +# This file contains the configuration for pydoc's internal webserver. + +# Default port for Python's pydoc server. +PYDOC3_4_PORT="7464" diff --git a/config-archive/etc/UPower/UPower.conf b/config-archive/etc/UPower/UPower.conf index c9da9cdf..31753cfd 100644 --- a/config-archive/etc/UPower/UPower.conf +++ b/config-archive/etc/UPower/UPower.conf @@ -20,6 +20,12 @@ SleepTimeout=1000 # default=true AllowHibernateEncryptedSwap=true +# This controls whether we want the powersave commands to be run when running +# on battery or plugging AC. +# +# default=true +RunPowersaveCommand=true + # Enable the Watts Up Pro device. # # The Watts Up Pro contains a generic FTDI USB device without a specific @@ -32,8 +38,8 @@ AllowHibernateEncryptedSwap=true # - Sparkfun FT232 breakout board # - Parallax Propeller # -# default=true -EnableWattsUpPro=true +# default=false +EnableWattsUpPro=false # Poll the kernel for dock state changes. # diff --git a/config-archive/etc/UPower/UPower.conf.1 b/config-archive/etc/UPower/UPower.conf.1 new file mode 100644 index 00000000..c9da9cdf --- /dev/null +++ b/config-archive/etc/UPower/UPower.conf.1 @@ -0,0 +1,54 @@ +# Only the system vendor should modify this file, ordinary users +# should not have to change anything. + +[UPower] + +# This is the smallest amount of time that UPower gives to session and system +# processes after the suspend or hibernate request is given. +# If the session power management component uses AboutToSuspend() then the +# session process can only make this time larger than the value below, never +# smaller. +# +# Reducing this time means the suspend happens quicker, but might also not give +# some processes enough time to save state. +# +# default=1000 +SleepTimeout=1000 + +# This controls whether hibernate is allowed when using encrypted swap. +# +# default=true +AllowHibernateEncryptedSwap=true + +# Enable the Watts Up Pro device. +# +# The Watts Up Pro contains a generic FTDI USB device without a specific +# vendor and product ID. When we probe for WUP devices, we can cause +# the user to get a perplexing "Device or resource busy" error when +# attempting to use their non-WUP device. +# +# The generic FTDI device is known to also be used on: +# +# - Sparkfun FT232 breakout board +# - Parallax Propeller +# +# default=true +EnableWattsUpPro=true + +# Poll the kernel for dock state changes. +# +# Some drivers are still broken, and do not send out uvents when the +# connected state changes. +# +# default=false +PollDockDevices=false + +# Do we ignore the lid state +# +# Some laptops are broken. The lid state is either inverted, or stuck +# on or off. We can't do much to fix these problems, but this is a way +# for users to make the laptop panel vanish and for programs like +# gnome-power-manager to not suspend on system startup. +# +# default=false +IgnoreLid=false diff --git a/config-archive/etc/UPower/UPower.conf.dist b/config-archive/etc/UPower/UPower.conf.dist index 23f06f8f..4282948e 100644 --- a/config-archive/etc/UPower/UPower.conf.dist +++ b/config-archive/etc/UPower/UPower.conf.dist @@ -3,29 +3,6 @@ [UPower] -# This is the smallest amount of time that UPower gives to session and system -# processes after the suspend or hibernate request is given. -# If the session power management component uses AboutToSuspend() then the -# session process can only make this time larger than the value below, never -# smaller. -# -# Reducing this time means the suspend happens quicker, but might also not give -# some processes enough time to save state. -# -# default=1000 -SleepTimeout=1000 - -# This controls whether hibernate is allowed when using encrypted swap. -# -# default=true -AllowHibernateEncryptedSwap=true - -# This controls whether we want the powersave commands to be run when running -# on battery or plugging AC. -# -# default=true -RunPowersaveCommand=true - # Enable the Watts Up Pro device. # # The Watts Up Pro contains a generic FTDI USB device without a specific @@ -38,23 +15,77 @@ RunPowersaveCommand=true # - Sparkfun FT232 breakout board # - Parallax Propeller # -# default=true -EnableWattsUpPro=true +# default=false +EnableWattsUpPro=false -# Poll the kernel for dock state changes. +# Don't poll the kernel for battery level changes. # -# Some drivers are still broken, and do not send out uvents when the -# connected state changes. +# Some hardware will send us battery level changes through +# events, rather than us having to poll for it. This option +# allows disabling polling for hardware that sends out events. # # default=false -PollDockDevices=false +NoPollBatteries=false # Do we ignore the lid state # # Some laptops are broken. The lid state is either inverted, or stuck # on or off. We can't do much to fix these problems, but this is a way # for users to make the laptop panel vanish and for programs like -# gnome-power-manager to not suspend on system startup. +# gnome-settings-daemon to not suspend on system startup. # # default=false IgnoreLid=false + +# Policy for warnings and action based on battery levels +# +# Whether battery percentage based policy should be used. The default +# is to use the time left, change to true to use the percentage, which +# should work around broken firmwares. +# default=false +UsePercentageForPolicy=false + +# When UsePercentageForPolicy is true, the levels at which UPower will +# consider the battery low, critical, or take action for the critical +# battery level. +# +# This will also be used for batteries which don't have time information +# such as that of peripherals. +# +# If any value is invalid, or not in descending order, the defaults +# will be used. +# +# Defaults: +# PercentageLow=10 +# PercentageCritical=3 +# PercentageAction=2 +PercentageLow=10 +PercentageCritical=3 +PercentageAction=2 + +# When UsePercentageForPolicy is false, the time remaining at which UPower +# will consider the battery low, critical, or take action for the critical +# battery level. +# +# If any value is invalid, or not in descending order, the defaults +# will be used. +# +# Defaults: +# TimeLow=1200 +# TimeCritical=300 +# TimeAction=120 +TimeLow=1200 +TimeCritical=300 +TimeAction=120 + +# The action to take when "TimeAction" or "PercentageAction" above has been +# reached for the batteries (UPS or laptop batteries) supplying the computer +# +# Possible values are: +# PowerOff +# Hibernate +# HybridSleep +# +# If HybridSleep isn't available, Hibernate will be used +# If Hibernate isn't available, PowerOff will be used +CriticalPowerAction=HybridSleep diff --git a/config-archive/etc/bash/bashrc b/config-archive/etc/bash/bashrc index 3ac0859a..856e9e4d 100644 --- a/config-archive/etc/bash/bashrc +++ b/config-archive/etc/bash/bashrc @@ -25,10 +25,10 @@ shopt -s histappend # Change the window title of X terminals case ${TERM} in - xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix) + xterm*|rxvt*|Eterm*|aterm|kterm|gnome*|interix) PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"' ;; - screen) + screen*) PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"' ;; esac @@ -68,7 +68,9 @@ if ${use_color} ; then fi alias ls='ls --color=auto' - #alias grep='grep --colour=auto' + alias grep='grep --colour=auto' + alias egrep='egrep --colour=auto' + alias fgrep='fgrep --colour=auto' else if [[ ${EUID} == 0 ]] ; then # show root@ when we don't have colors diff --git a/config-archive/etc/bash/bashrc.1 b/config-archive/etc/bash/bashrc.1 index d1281e35..3ac0859a 100644 --- a/config-archive/etc/bash/bashrc.1 +++ b/config-archive/etc/bash/bashrc.1 @@ -139,8 +139,7 @@ if [ -f /usr/share/mc/mc.gentoo ]; then . /usr/share/mc/mc.gentoo fi -if [ -f /etc/profile.d/bash-completion ]; then - . /etc/profile.d/bash-completion +if [ -e /etc/bash_completion.d/git ] ; then if [[ ${EUID} == 0 ]] ; then PS1='$? \[\033[01;31m\]\h\[\033[01;30m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] \$ \[\033[00m\]' else @@ -148,5 +147,4 @@ if [ -f /etc/profile.d/bash-completion ]; then fi fi - # vim: ts=4 expandtab diff --git a/config-archive/etc/bash/bashrc.2 b/config-archive/etc/bash/bashrc.2 new file mode 100644 index 00000000..d1281e35 --- /dev/null +++ b/config-archive/etc/bash/bashrc.2 @@ -0,0 +1,152 @@ +# /etc/bash/bashrc +# +# This file is sourced by all *interactive* bash shells on startup, +# including some apparently interactive shells such as scp and rcp +# that can't tolerate any output. So make sure this doesn't display +# anything or bad things will happen ! + + +# Test for an interactive shell. There is no need to set anything +# past this point for scp and rcp, and it's important to refrain from +# outputting anything in those cases. +if [[ $- != *i* ]] ; then + # Shell is non-interactive. Be done now! + return +fi + +# Bash won't get SIGWINCH if another process is in the foreground. +# Enable checkwinsize so that bash will check the terminal size when +# it regains control. #65623 +# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11) +shopt -s checkwinsize + +# Enable history appending instead of overwriting. #139609 +shopt -s histappend + +# Change the window title of X terminals +case ${TERM} in + xterm*|rxvt*|Eterm|aterm|kterm|gnome*|interix) + PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"' + ;; + screen) + PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\033\\"' + ;; +esac + +use_color=false + +# Set colorful PS1 only on colorful terminals. +# dircolors --print-database uses its own built-in database +# instead of using /etc/DIR_COLORS. Try to use the external file +# first to take advantage of user additions. Use internal bash +# globbing instead of external grep binary. +safe_term=${TERM//[^[:alnum:]]/?} # sanitize TERM +match_lhs="" +[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)" +[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(/dev/null \ + && match_lhs=$(dircolors --print-database) +[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true + +if ${use_color} ; then + # Enable colors for ls, etc. Prefer ~/.dir_colors #64489 + if type -P dircolors >/dev/null ; then + if [[ -f ~/.dir_colors ]] ; then + eval $(dircolors -b ~/.dir_colors) + elif [[ -f /etc/DIR_COLORS ]] ; then + eval $(dircolors -b /etc/DIR_COLORS) + fi + fi + + if [[ ${EUID} == 0 ]] ; then + #PS1='\[\033[01;31m\]\h\[\033[01;34m\] \W \$\[\033[00m\] ' + PS1='$? \[\033[01;31m\]\h\[\033[01;30m\]:\[\033[01;34m\]\w \$ \[\033[00m\]' + else + #PS1='\[\033[01;32m\]\u@\h\[\033[01;34m\] \w \$\[\033[00m\] ' + PS1='$? \[\033[01;32m\]\u@\h\[\033[01;30m\]:\[\033[01;34m\]\w > \[\033[00m\]' + fi + + alias ls='ls --color=auto' + #alias grep='grep --colour=auto' +else + if [[ ${EUID} == 0 ]] ; then + # show root@ when we don't have colors + PS1='\u@\h \W \$ ' + else + PS1='\u@\h \w \$ ' + fi +fi + +# Try to keep environment pollution down, EPA loves us. +unset use_color safe_term match_lhs + +if [ -d /usr/scripts ] ; then + PATH=/usr/scripts:$PATH + export PATH +fi + +if [ -d $HOME/bin ] ; then + PATH=$PATH:$HOME/bin + export PATH +fi + +if [ -d $HOME/lib ] ; then + PERL5LIB=$HOME/lib + export PERL5LIB +fi + +#if [[ ${EUID} == 0 ]] ; then +# alias ll="ls -lA" +#else +# alias ll="ls -l" +#fi +alias l="ls -l" +alias ll="ls -lA" +alias la="ls -la" +alias md=mkdir +alias rd=rmdir +alias ..='cd ..' +alias ...='cd ../..' +alias cd..='cd ..' +alias cd...='cd ../..' +alias pl="ps -fu $USER" + +lcd() { + cd $( perl -e ' +use strict; +use Cwd; +my $new = shift; +my $cwd = Cwd::abs_path(getcwd()); +my $newa = $cwd; +if ($new){ + $newa = Cwd::abs_path($new); + $newa = $cwd unless $newa; +}; +printf("%s\n", $newa); +' $1 ) +} + +export LESS="-R -M -I --shift 5" +export LESSCHARSET="utf-8" + +HISTCONTROL=ignoreboth +HISTSIZE=50000 +HISTFILESIZE=50000 +HISTTIMEFORMAT='%Y-%m-%d %H:%M:%S ' + +if [ -f /usr/share/mc/mc.gentoo ]; then + . /usr/share/mc/mc.gentoo +fi + +if [ -f /etc/profile.d/bash-completion ]; then + . /etc/profile.d/bash-completion + if [[ ${EUID} == 0 ]] ; then + PS1='$? \[\033[01;31m\]\h\[\033[01;30m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] \$ \[\033[00m\]' + else + PS1='$? \[\033[01;32m\]\u@\h\[\033[01;30m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(__git_ps1)\[\033[01;34m\] > \[\033[00m\]' + fi +fi + + +# vim: ts=4 expandtab diff --git a/config-archive/etc/bash/bashrc.dist b/config-archive/etc/bash/bashrc.dist index 3067022e..3a8095cf 100644 --- a/config-archive/etc/bash/bashrc.dist +++ b/config-archive/etc/bash/bashrc.dist @@ -25,7 +25,7 @@ shopt -s histappend # Change the window title of X terminals case ${TERM} in - xterm*|rxvt*|Eterm*|aterm|kterm|gnome*|interix) + xterm*|rxvt*|Eterm*|aterm|kterm|gnome*|interix|konsole*) PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}\007"' ;; screen*) diff --git a/config-archive/etc/bind/named.conf b/config-archive/etc/bind/named.conf index 6bc1bf96..d507a5db 100644 --- a/config-archive/etc/bind/named.conf +++ b/config-archive/etc/bind/named.conf @@ -36,8 +36,10 @@ acl "local_ips" { }; acl "private_ips" { + 10.12.11.0/24; 2001:6f8:1db7::1/64; 2001:6f8:1c00:365::2/64; + 2a02:8109:9300:488::/64; 2a01:238:4225:6e00:8f8c:808a:7fb8:88df; }; @@ -158,18 +160,18 @@ zone "127.in-addr.arpa" IN { # }; #}; -zone "home.brehm-online.com" IN { - type slave; - file "sec/home.brehm-online.com.zone"; - masters { - 2a01:238:4225:6e00:8f8c:808a:7fb8:88df; - 2a01:238:4239:8a00:d4da:215d:3d01:f9b9; - //85.214.134.152; - }; - //allow-transfer { - // transfer_hosts; - //}; -}; +#zone "home.brehm-online.com" IN { +# type slave; +# file "sec/home.brehm-online.com.zone"; +# masters { +# 2a01:238:4225:6e00:8f8c:808a:7fb8:88df; +# 2a01:238:4239:8a00:d4da:215d:3d01:f9b9; +# //85.214.134.152; +# }; +# //allow-transfer { +# // transfer_hosts; +# //}; +#}; #zone "11.12.10.in-addr.arpa" IN { # type forward; @@ -181,18 +183,18 @@ zone "home.brehm-online.com" IN { # }; #}; -zone "11.12.10.in-addr.arpa" IN { - type slave; - file "sec/rev.10.12.11.zone"; - masters { - 2a01:238:4225:6e00:8f8c:808a:7fb8:88df; - 2a01:238:4239:8a00:d4da:215d:3d01:f9b9; - //85.214.134.152; - }; - //allow-transfer { - // transfer_hosts; - //}; -}; +#zone "11.12.10.in-addr.arpa" IN { +# type slave; +# file "sec/rev.10.12.11.zone"; +# masters { +# 2a01:238:4225:6e00:8f8c:808a:7fb8:88df; +# 2a01:238:4239:8a00:d4da:215d:3d01:f9b9; +# //85.214.134.152; +# }; +# //allow-transfer { +# // transfer_hosts; +# //}; +#}; /* * Briefly, a zone which has been declared delegation-only will be effectively diff --git a/config-archive/etc/bind/named.conf.1 b/config-archive/etc/bind/named.conf.1 new file mode 100644 index 00000000..6bc1bf96 --- /dev/null +++ b/config-archive/etc/bind/named.conf.1 @@ -0,0 +1,231 @@ +/* + * Refer to the named.conf(5) and named(8) man pages, and the documentation + * in /usr/share/doc/bind-9 for more details. + * Online versions of the documentation can be found here: + * http://www.isc.org/software/bind/documentation + * + * If you are going to set up an authoritative server, make sure you + * understand the hairy details of how DNS works. Even with simple mistakes, + * you can break connectivity for affected parties, or cause huge amounts of + * useless Internet traffic. + */ + +acl "xfer" { + /* Deny transfers by default except for the listed hosts. + * If we have other name servers, place them here. + */ + none; +}; + +/* + * You might put in here some ips which are allowed to use the cache or + * recursive queries + */ +acl "trusted" { + 127.0.0.0/8; + ::1/128; +}; + +acl "local_ips" { + 127.0.0.0/8; + 10.0.0.0/8; + 192.168.0.0/16; + 172.16.0.0/12; + ::1/128; + fe80::/10; +}; + +acl "private_ips" { + 2001:6f8:1db7::1/64; + 2001:6f8:1c00:365::2/64; + 2a01:238:4225:6e00:8f8c:808a:7fb8:88df; +}; + +options { + directory "/var/bind"; + pid-file "/var/run/named/named.pid"; + + /* https://www.isc.org/solutions/dlv >=bind-9.7.x only */ + //bindkeys-file "/etc/bind/bind.keys"; + + listen-on-v6 { any; }; + listen-on { any; }; + + allow-query { + /* + * Accept queries from our "trusted" ACL. We will + * allow anyone to query our master zones below. + * This prevents us from becoming a free DNS server + * to the masses. + */ + trusted; + local_ips; + private_ips; + }; + + allow-query-cache { + /* Use the cache for the "trusted" ACL. */ + trusted; + local_ips; + private_ips; + }; + + allow-recursion { + /* Only trusted addresses are allowed to use recursion. */ + trusted; + local_ips; + private_ips; + }; + + allow-transfer { + /* Zone tranfers are denied by default. */ + trusted; + private_ips; + }; + + allow-update { + /* Don't allow updates, e.g. via nsupdate. */ + none; + }; + + /* + * If you've got a DNS server around at your upstream provider, enter its + * IP address here, and enable the line below. This will make you benefit + * from its cache, thus reduce overall DNS traffic in the Internet. + * + * Uncomment the following lines to turn on DNS forwarding, and change + * and/or update the forwarding ip address(es): + */ +/* + forward first; + forwarders { + // 123.123.123.123; // Your ISP NS + // 124.124.124.124; // Your ISP NS + // 4.2.2.1; // Level3 Public DNS + // 4.2.2.2; // Level3 Public DNS + 8.8.8.8; // Google Open DNS + 8.8.4.4; // Google Open DNS + }; + +*/ + + //dnssec-enable yes; + //dnssec-validation yes; + + /* + * As of bind 9.8.0: + * "If the root key provided has expired, + * named will log the expiration and validation will not work." + */ + //dnssec-validation auto; + + /* if you have problems and are behind a firewall: */ + //query-source address * port 53; +}; + +// Logging +include "/etc/bind/named-log.conf"; + +include "/etc/bind/rndc.key"; +controls { + inet 127.0.0.1 port 953 allow { 127.0.0.1/32; ::1/128; } keys { "rndc-key"; }; +}; + +zone "." in { + type hint; + file "/var/bind/root.cache"; +}; + +zone "localhost" IN { + type master; + file "pri/localhost.zone"; + notify no; +}; + +zone "127.in-addr.arpa" IN { + type master; + file "pri/127.zone"; + notify no; +}; + +#zone "home.brehm-online.com" IN { +# type forward; +# forwarders { +# //85.214.147.150; +# //85.214.134.152; +# 2a01:238:4225:6e00:8f8c:808a:7fb8:88df; +# 2a01:238:4239:8a00:d4da:215d:3d01:f9b9; +# }; +#}; + +zone "home.brehm-online.com" IN { + type slave; + file "sec/home.brehm-online.com.zone"; + masters { + 2a01:238:4225:6e00:8f8c:808a:7fb8:88df; + 2a01:238:4239:8a00:d4da:215d:3d01:f9b9; + //85.214.134.152; + }; + //allow-transfer { + // transfer_hosts; + //}; +}; + +#zone "11.12.10.in-addr.arpa" IN { +# type forward; +# forwarders { +# //85.214.147.150; +# //85.214.134.152; +# 2a01:238:4225:6e00:8f8c:808a:7fb8:88df; +# 2a01:238:4239:8a00:d4da:215d:3d01:f9b9; +# }; +#}; + +zone "11.12.10.in-addr.arpa" IN { + type slave; + file "sec/rev.10.12.11.zone"; + masters { + 2a01:238:4225:6e00:8f8c:808a:7fb8:88df; + 2a01:238:4239:8a00:d4da:215d:3d01:f9b9; + //85.214.134.152; + }; + //allow-transfer { + // transfer_hosts; + //}; +}; + +/* + * Briefly, a zone which has been declared delegation-only will be effectively + * limited to containing NS RRs for subdomains, but no actual data beyond its + * own apex (for example, its SOA RR and apex NS RRset). This can be used to + * filter out "wildcard" or "synthesized" data from NAT boxes or from + * authoritative name servers whose undelegated (in-zone) data is of no + * interest. + * See http://www.isc.org/software/bind/delegation-only for more info + */ + +//zone "COM" { type delegation-only; }; +//zone "NET" { type delegation-only; }; + +//zone "YOUR-DOMAIN.TLD" { +// type master; +// file "/var/bind/pri/YOUR-DOMAIN.TLD.zone"; +// allow-query { any; }; +// allow-transfer { xfer; }; +//}; + +//zone "YOUR-SLAVE.TLD" { +// type slave; +// file "/var/bind/sec/YOUR-SLAVE.TLD.zone"; +// masters { ; }; + + /* Anybody is allowed to query but transfer should be controlled by the master. */ +// allow-query { any; }; +// allow-transfer { none; }; + + /* The master should be the only one who notifies the slaves, shouldn't it? */ +// allow-notify { ; }; +// notify no; +//}; + +# vim: ts=4 filetype=named noai diff --git a/config-archive/etc/bind/named.conf.dist.new b/config-archive/etc/bind/named.conf.dist.new index b24c2e4c..39f9be26 100644 --- a/config-archive/etc/bind/named.conf.dist.new +++ b/config-archive/etc/bind/named.conf.dist.new @@ -1,8 +1,8 @@ /* * Refer to the named.conf(5) and named(8) man pages, and the documentation - * in /usr/share/doc/bind-9 for more details. + * in /usr/share/doc/bind-* for more details. * Online versions of the documentation can be found here: - * http://www.isc.org/software/bind/documentation + * https://kb.isc.org/article/AA-01031 * * If you are going to set up an authoritative server, make sure you * understand the hairy details of how DNS works. Even with simple mistakes, @@ -28,7 +28,7 @@ acl "trusted" { options { directory "/var/bind"; - pid-file "/var/run/named/named.pid"; + pid-file "/run/named/named.pid"; /* https://www.isc.org/solutions/dlv >=bind-9.7.x only */ //bindkeys-file "/etc/bind/bind.keys"; @@ -87,7 +87,7 @@ options { */ - //dnssec-enable yes; + dnssec-enable yes; //dnssec-validation yes; /* @@ -95,7 +95,7 @@ options { * "If the root key provided has expired, * named will log the expiration and validation will not work." */ - //dnssec-validation auto; + dnssec-validation auto; /* if you have problems and are behind a firewall: */ //query-source address * port 53; @@ -131,12 +131,6 @@ zone "localhost" IN { notify no; }; -zone "127.in-addr.arpa" IN { - type master; - file "pri/127.zone"; - notify no; -}; - /* * Briefly, a zone which has been declared delegation-only will be effectively * limited to containing NS RRs for subdomains, but no actual data beyond its diff --git a/config-archive/etc/dbus-1/system.d/org.freedesktop.UPower.conf b/config-archive/etc/dbus-1/system.d/org.freedesktop.UPower.conf new file mode 100644 index 00000000..fc2b604a --- /dev/null +++ b/config-archive/etc/dbus-1/system.d/org.freedesktop.UPower.conf @@ -0,0 +1,40 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/config-archive/etc/dbus-1/system.d/org.freedesktop.UPower.conf.dist b/config-archive/etc/dbus-1/system.d/org.freedesktop.UPower.conf.dist new file mode 100644 index 00000000..5a6c660b --- /dev/null +++ b/config-archive/etc/dbus-1/system.d/org.freedesktop.UPower.conf.dist @@ -0,0 +1,36 @@ + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/config-archive/etc/default/grub b/config-archive/etc/default/grub new file mode 100644 index 00000000..321487b3 --- /dev/null +++ b/config-archive/etc/default/grub @@ -0,0 +1,47 @@ +# Copyright 1999-2013 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-2,v 1.4 2013/09/21 18:10:55 floppym Exp $ +# +# To populate all changes in this file you need to regenerate your +# grub configuration file afterwards: +# 'grub2-mkconfig -o /boot/grub/grub.cfg' +# +# See the grub info page for documentation on possible variables and +# their associated values. + +GRUB_DISTRIBUTOR="Bruni (Gentoo)" + +GRUB_DEFAULT=0 +GRUB_HIDDEN_TIMEOUT=5 +GRUB_HIDDEN_TIMEOUT_QUIET=true +GRUB_TIMEOUT=10 + +# Append parameters to the linux kernel command line +# GRUB_CMDLINE_LINUX="" + +# Append parameters to the linux kernel command line for non-recovery entries +#GRUB_CMDLINE_LINUX_DEFAULT="" + +# Uncomment to disable graphical terminal (grub-pc only) +#GRUB_TERMINAL=console + +# The resolution used on graphical terminal. +# Note that you can use only modes which your graphic card supports via VBE. +# You can see them in real GRUB with the command `vbeinfo'. +#GRUB_GFXMODE=640x480 +GRUB_GFXMODE=800x600 + +# Path to theme spec txt file. +# The starfield is by default provided with use truetype. +# NOTE: when enabling custom theme, ensure you have required font/etc. +#GRUB_THEME="/boot/grub/themes/starfield/theme.txt" + +# Background image used on graphical terminal. +# Can be in various bitmap formats. +#GRUB_BACKGROUND="/boot/grub/mybackground.png" + +# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to kernel +GRUB_DISABLE_LINUX_UUID=true + +# Uncomment to disable generation of recovery mode menu entries +#GRUB_DISABLE_RECOVERY=true diff --git a/config-archive/etc/default/grub.dist b/config-archive/etc/default/grub.dist new file mode 100644 index 00000000..f3f7e476 --- /dev/null +++ b/config-archive/etc/default/grub.dist @@ -0,0 +1,63 @@ +# Copyright 1999-2014 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-3,v 1.4 2014/10/16 04:04:02 floppym Exp $ +# +# To populate all changes in this file you need to regenerate your +# grub configuration file afterwards: +# 'grub2-mkconfig -o /boot/grub/grub.cfg' +# +# See the grub info page for documentation on possible variables and +# their associated values. + +GRUB_DISTRIBUTOR="Gentoo" + +# Default menu entry +#GRUB_DEFAULT=0 + +# Boot the default entry this many seconds after the menu is displayed +#GRUB_TIMEOUT=5 +#GRUB_TIMEOUT_STYLE=menu + +# Append parameters to the linux kernel command line +#GRUB_CMDLINE_LINUX="" +# +# Examples: +# +# Boot with network interface renaming disabled +# GRUB_CMDLINE_LINUX="net.ifnames=0" +# +# Boot with systemd instead of sysvinit (openrc) +# GRUB_CMDLINE_LINUX="init=/usr/lib/systemd/systemd" + +# Append parameters to the linux kernel command line for non-recovery entries +#GRUB_CMDLINE_LINUX_DEFAULT="" + +# Uncomment to disable graphical terminal (grub-pc only) +#GRUB_TERMINAL=console + +# The resolution used on graphical terminal. +# Note that you can use only modes which your graphic card supports via VBE. +# You can see them in real GRUB with the command `vbeinfo'. +#GRUB_GFXMODE=640x480 + +# Set to 'text' to force the Linux kernel to boot in normal text +# mode, 'keep' to preserve the graphics mode set using +# 'GRUB_GFXMODE', 'WIDTHxHEIGHT'['xDEPTH'] to set a particular +# graphics mode, or a sequence of these separated by commas or +# semicolons to try several modes in sequence. +#GRUB_GFXPAYLOAD_LINUX= + +# Path to theme spec txt file. +# The starfield is by default provided with use truetype. +# NOTE: when enabling custom theme, ensure you have required font/etc. +#GRUB_THEME="/boot/grub/themes/starfield/theme.txt" + +# Background image used on graphical terminal. +# Can be in various bitmap formats. +#GRUB_BACKGROUND="/boot/grub/mybackground.png" + +# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to kernel +#GRUB_DISABLE_LINUX_UUID=true + +# Uncomment to disable generation of recovery mode menu entries +#GRUB_DISABLE_RECOVERY=true diff --git a/config-archive/etc/init.d/g15daemon.dist b/config-archive/etc/init.d/g15daemon.dist new file mode 100755 index 00000000..4ea22a0c --- /dev/null +++ b/config-archive/etc/init.d/g15daemon.dist @@ -0,0 +1,46 @@ +#!/sbin/runscript +# Copyright 1999-2014 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/files/g15daemon-1.9.5.3.initd,v 1.3 2014/08/03 11:23:31 polynomial-c Exp $ + +# Init script for g15daemon + +pidfile="/var/run/g15daemon.pid" +command="/usr/sbin/g15daemon" +start_stop_daemon_args="--wait 30" +command_args="" + +depend() { + after hotplug + after usb + after modules +} + +start_pre() { + # Does the input device already exist? + if [ -e "/proc/modules" ] ; then + if [ ! -e "/dev/input/uinput" ] && [ ! -e "/dev/uinput" ] ; then + # We can load modules, but uinput device does not exist + einfo "Loading uinput module" + /sbin/modprobe uinput > /dev/null 2> /dev/null \ + || return 1 + fi + fi + + if [ "${CLIENT_SWITCH_L1}" = "yes" ] ; then + command_args="--switch" + fi +} + +stop() { + ebegin "Stopping g15daemon" + local KILLOPT="-k" + if [ $BACKLIGHT_OFF = "yes" ]; then + KILLOPT="-K" + fi + while [ -f "${pidfile}" ] && kill -0 $(cat ${pidfile}) ; do + ${command} ${KILLOPT} + sleep 1 + done + eend $? +} diff --git a/config-archive/etc/init.d/g15daemon.dist.new b/config-archive/etc/init.d/g15daemon.dist.new deleted file mode 100755 index 7976cff0..00000000 --- a/config-archive/etc/init.d/g15daemon.dist.new +++ /dev/null @@ -1,41 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/files/g15daemon-1.9.5.3.initd,v 1.2 2013/03/18 17:49:55 polynomial-c Exp $ - -# Init script for g15daemon - -pidfile="/var/run/g15daemon.pid" -command="/usr/sbin/g15daemon" -command_args="" -start_stop_daemon_args="--background --pidfile ${pidfile}" - -depend() { - after hotplug - after usb - after modules -} - -start_pre() { - # Does the input device already exist? - if [ -e "/proc/modules" ] ; then - if [ ! -e "/dev/input/uinput" ] && [ ! -e "/dev/uinput" ] ; then - # We can load modules, but uinput device does not exist - einfo "Loading uinput module" - /sbin/modprobe uinput > /dev/null 2> /dev/null - fi - fi - - local SWITCHKEY="" - [ "${CLIENT_SWITCH_L1}" = "yes" ] && command_args="--switch" -} - -stop() { - ebegin "Stopping g15daemon" - local KILLOPT="-k" - if [ $BACKLIGHT_OFF = "yes" ]; then - KILLOPT="-K" - fi - start-stop-daemon -R 5 --exec ${command} -- ${KILLOPT} - eend $? -} diff --git a/config-archive/etc/mysql/my.cnf b/config-archive/etc/mysql/my.cnf index 775dce06..e054133e 100644 --- a/config-archive/etc/mysql/my.cnf +++ b/config-archive/etc/mysql/my.cnf @@ -1,5 +1,5 @@ # /etc/mysql/my.cnf: The global mysql configuration file. -# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.3 2012/02/15 02:07:21 jmbsvicetto Exp $ +# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.4 2013/01/20 02:40:02 robbat2 Exp $ # The following options will be passed to all MySQL clients [client] diff --git a/config-archive/etc/mysql/my.cnf.1 b/config-archive/etc/mysql/my.cnf.1 index b324ed2c..775dce06 100644 --- a/config-archive/etc/mysql/my.cnf.1 +++ b/config-archive/etc/mysql/my.cnf.1 @@ -1,5 +1,5 @@ # /etc/mysql/my.cnf: The global mysql configuration file. -# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.2 2010/03/24 18:26:09 robbat2 Exp $ +# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.3 2012/02/15 02:07:21 jmbsvicetto Exp $ # The following options will be passed to all MySQL clients [client] @@ -58,6 +58,7 @@ skip-external-locking key_buffer = 16M max_allowed_packet = 1M table_cache = 64 +table_open_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K diff --git a/config-archive/etc/mysql/my.cnf.2 b/config-archive/etc/mysql/my.cnf.2 new file mode 100644 index 00000000..b324ed2c --- /dev/null +++ b/config-archive/etc/mysql/my.cnf.2 @@ -0,0 +1,149 @@ +# /etc/mysql/my.cnf: The global mysql configuration file. +# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.2 2010/03/24 18:26:09 robbat2 Exp $ + +# The following options will be passed to all MySQL clients +[client] +#password = your_password +port = 3306 +socket = /var/run/mysqld/mysqld.sock + +[mysql] +character-sets-dir=/usr/share/mysql/charsets +default-character-set=utf8 +prompt = MySQL \u@\h:\d >\_ + +[mysqladmin] +character-sets-dir=/usr/share/mysql/charsets +default-character-set=utf8 + +[mysqlcheck] +character-sets-dir=/usr/share/mysql/charsets +default-character-set=utf8 + +[mysqldump] +character-sets-dir=/usr/share/mysql/charsets +default-character-set=utf8 + +[mysqlimport] +character-sets-dir=/usr/share/mysql/charsets +default-character-set=utf8 + +[mysqlshow] +character-sets-dir=/usr/share/mysql/charsets +default-character-set=utf8 + +[myisamchk] +character-sets-dir=/usr/share/mysql/charsets + +[myisampack] +character-sets-dir=/usr/share/mysql/charsets + +# use [safe_mysqld] with mysql-3 +[mysqld_safe] +err-log = /var/log/mysql/mysql.err + +# add a section [mysqld-4.1] or [mysqld-5.0] for specific configurations +[mysqld] +character-set-server = utf8 +default-character-set = utf8 +user = mysql +port = 3306 +socket = /var/run/mysqld/mysqld.sock +pid-file = /var/run/mysqld/mysqld.pid +log-error = /var/log/mysql/mysqld.err +basedir = /usr +#datadir = /var/lib/mysql +datadir = /data/mysql +skip-external-locking +key_buffer = 16M +max_allowed_packet = 1M +table_cache = 64 +sort_buffer_size = 512K +net_buffer_length = 8K +read_buffer_size = 256K +read_rnd_buffer_size = 512K +myisam_sort_buffer_size = 8M +language = /usr/share/mysql/german + +# security: +# using "localhost" in connects uses sockets by default +# skip-networking +#bind-address = 127.0.0.1 + +log-bin +server-id = 1 + +# point the following paths to different dedicated disks +tmpdir = /tmp/ +#log-update = /path-to-dedicated-directory/hostname + +# you need the debug USE flag enabled to use the following directives, +# if needed, uncomment them, start the server and issue +# #tail -f /tmp/mysqld.sql /tmp/mysqld.trace +# this will show you *exactly* what's happening in your server ;) + +#log = /tmp/mysqld.sql +#gdb +#debug = d:t:i:o,/tmp/mysqld.trace +#one-thread + +# uncomment the following directives if you are using BDB tables +#bdb_cache_size = 4M +#bdb_max_lock = 10000 + +# the following is the InnoDB configuration +# if you wish to disable innodb instead +# uncomment just the next line +#skip-innodb +# +# the rest of the innodb config follows: +# don't eat too much memory, we're trying to be safe on 64Mb boxes +# you might want to bump this up a bit on boxes with more RAM +innodb_buffer_pool_size = 16M +# this is the default, increase it if you have lots of tables +innodb_additional_mem_pool_size = 2M +# +# i'd like to use /var/lib/mysql/innodb, but that is seen as a database :-( +# and upstream wants things to be under /var/lib/mysql/, so that's the route +# we have to take for the moment +#innodb_data_home_dir = /var/lib/mysql/ +#innodb_log_arch_dir = /var/lib/mysql/ +#innodb_log_group_home_dir = /var/lib/mysql/ +# you may wish to change this size to be more suitable for your system +# the max is there to avoid run-away growth on your machine +innodb_data_file_path = ibdata1:10M:autoextend:max:128M +# we keep this at around 25% of of innodb_buffer_pool_size +# sensible values range from 1MB to (1/innodb_log_files_in_group*innodb_buffer_pool_size) +innodb_log_file_size = 5M +# this is the default, increase it if you have very large transactions going on +innodb_log_buffer_size = 8M +# this is the default and won't hurt you +# you shouldn't need to tweak it +innodb_log_files_in_group=2 +# see the innodb config docs, the other options are not always safe +innodb_flush_log_at_trx_commit = 1 +innodb_lock_wait_timeout = 50 +innodb_file_per_table + +[mysqldump] +quick +max_allowed_packet = 16M + +[mysql] +# uncomment the next directive if you are not familiar with SQL +#safe-updates + +[isamchk] +key_buffer = 20M +sort_buffer_size = 20M +read_buffer = 2M +write_buffer = 2M + +[myisamchk] +key_buffer = 20M +sort_buffer_size = 20M +read_buffer = 2M +write_buffer = 2M + +[mysqlhotcopy] +interactive-timeout diff --git a/config-archive/etc/mysql/my.cnf.dist b/config-archive/etc/mysql/my.cnf.dist index 2b0bd062..d15fe33e 100644 --- a/config-archive/etc/mysql/my.cnf.dist +++ b/config-archive/etc/mysql/my.cnf.dist @@ -1,5 +1,5 @@ # /etc/mysql/my.cnf: The global mysql configuration file. -# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.4 2013/01/20 02:40:02 robbat2 Exp $ +# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.5,v 1.4 2014/08/28 14:06:54 grknight Exp $ # The following options will be passed to all MySQL clients [client] @@ -52,7 +52,7 @@ log-error = /var/log/mysql/mysqld.err basedir = /usr datadir = /data/mysql skip-external-locking -key_buffer = 16M +key_buffer_size = 16M max_allowed_packet = 1M table_open_cache = 64 sort_buffer_size = 512K @@ -60,7 +60,9 @@ net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M -language = /usr/share/mysql/english +lc_messages_dir = /usr/share/mysql +#Set this to your desired error message language +lc_messages = en_US # security: # using "localhost" in connects uses sockets by default @@ -84,10 +86,6 @@ tmpdir = /tmp/ #debug = d:t:i:o,/tmp/mysqld.trace #one-thread -# uncomment the following directives if you are using BDB tables -#bdb_cache_size = 4M -#bdb_max_lock = 10000 - # the following is the InnoDB configuration # if you wish to disable innodb instead # uncomment just the next line @@ -122,6 +120,10 @@ innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50 innodb_file_per_table +# Uncomment this to get FEDERATED engine support +#plugin-load=federated=ha_federated.so +#loose-federated + [mysqldump] quick max_allowed_packet = 16M @@ -131,16 +133,17 @@ max_allowed_packet = 16M #safe-updates [isamchk] -key_buffer = 20M +key_buffer_size = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] -key_buffer = 20M +key_buffer_size = 20M sort_buffer_size = 20M -read_buffer = 2M -write_buffer = 2M +read_buffer_size = 2M +write_buffer_size = 2M [mysqlhotcopy] interactive-timeout + diff --git a/config-archive/etc/postfix/main.cf b/config-archive/etc/postfix/main.cf index 0436c1c4..5e3d60fd 100644 --- a/config-archive/etc/postfix/main.cf +++ b/config-archive/etc/postfix/main.cf @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.10.2/html +html_directory = /usr/share/doc/postfix-2.10.3/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.10.2/readme +readme_directory = /usr/share/doc/postfix-2.10.3/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.1 b/config-archive/etc/postfix/main.cf.1 index f7e2a6a6..0436c1c4 100644 --- a/config-archive/etc/postfix/main.cf.1 +++ b/config-archive/etc/postfix/main.cf.1 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.10.1/html +html_directory = /usr/share/doc/postfix-2.10.2/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.10.1/readme +readme_directory = /usr/share/doc/postfix-2.10.2/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.2 b/config-archive/etc/postfix/main.cf.2 index 1232f478..f7e2a6a6 100644 --- a/config-archive/etc/postfix/main.cf.2 +++ b/config-archive/etc/postfix/main.cf.2 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.10.0/html +html_directory = /usr/share/doc/postfix-2.10.1/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.10.0/readme +readme_directory = /usr/share/doc/postfix-2.10.1/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.3 b/config-archive/etc/postfix/main.cf.3 index c438ed09..1232f478 100644 --- a/config-archive/etc/postfix/main.cf.3 +++ b/config-archive/etc/postfix/main.cf.3 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.9.5/html +html_directory = /usr/share/doc/postfix-2.10.0/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.9.5/readme +readme_directory = /usr/share/doc/postfix-2.10.0/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.4 b/config-archive/etc/postfix/main.cf.4 index c1606d6e..c438ed09 100644 --- a/config-archive/etc/postfix/main.cf.4 +++ b/config-archive/etc/postfix/main.cf.4 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.9.4/html +html_directory = /usr/share/doc/postfix-2.9.5/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,11 +658,11 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.9.4/readme +readme_directory = /usr/share/doc/postfix-2.9.5/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes -smtpd_sasl2_auth_enable = yes +#smtpd_sasl2_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_sasl_local_domain = $myhostname diff --git a/config-archive/etc/postfix/main.cf.5 b/config-archive/etc/postfix/main.cf.5 index 22ce4373..c1606d6e 100644 --- a/config-archive/etc/postfix/main.cf.5 +++ b/config-archive/etc/postfix/main.cf.5 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.9.3/html +html_directory = /usr/share/doc/postfix-2.9.4/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.9.3/readme +readme_directory = /usr/share/doc/postfix-2.9.4/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.6 b/config-archive/etc/postfix/main.cf.6 index 03fb0bfa..22ce4373 100644 --- a/config-archive/etc/postfix/main.cf.6 +++ b/config-archive/etc/postfix/main.cf.6 @@ -39,7 +39,7 @@ command_directory = /usr/sbin # daemon programs (i.e. programs listed in the master.cf file). This # directory must be owned by root. # -daemon_directory = /usr/lib64/postfix +daemon_directory = /usr/libexec/postfix # The data_directory parameter specifies the location of Postfix-writable # data files (caches, random numbers). This directory must be owned @@ -463,7 +463,12 @@ mynetworks = 10.12.11.0/24, 127.0.0.0/8, [::1]/128, [2001:6f8:1db7::]/64 # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # -#mailbox_transport = lmtp:unix:/file/name +# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd" +# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf. +#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp +# +# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and +# subsequent line in master.cf. #mailbox_transport = cyrus # The fallback_transport specifies the optional transport in master.cf @@ -640,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.8.9/html +html_directory = /usr/share/doc/postfix-2.9.3/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -653,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.8.9/readme +readme_directory = /usr/share/doc/postfix-2.9.3/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.7 b/config-archive/etc/postfix/main.cf.7 index 76d1551d..03fb0bfa 100644 --- a/config-archive/etc/postfix/main.cf.7 +++ b/config-archive/etc/postfix/main.cf.7 @@ -640,7 +640,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.8.7/html +html_directory = /usr/share/doc/postfix-2.8.9/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -653,7 +653,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.8.7/readme +readme_directory = /usr/share/doc/postfix-2.8.9/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.8 b/config-archive/etc/postfix/main.cf.8 index dba4ff00..76d1551d 100644 --- a/config-archive/etc/postfix/main.cf.8 +++ b/config-archive/etc/postfix/main.cf.8 @@ -264,7 +264,7 @@ unknown_local_recipient_reject_code = 550 #mynetworks = 168.100.189.0/28, 127.0.0.0/8 #mynetworks = $config_directory/mynetworks #mynetworks = hash:/etc/postfix/network_table -mynetworks = 10.12.11.0/24 +mynetworks = 10.12.11.0/24, 127.0.0.0/8, [::1]/128, [2001:6f8:1db7::]/64 # The relay_domains parameter restricts what destinations this system will # relay mail to. See the smtpd_recipient_restrictions description in diff --git a/config-archive/etc/postfix/main.cf.9 b/config-archive/etc/postfix/main.cf.9 new file mode 100644 index 00000000..dba4ff00 --- /dev/null +++ b/config-archive/etc/postfix/main.cf.9 @@ -0,0 +1,692 @@ +# Global Postfix configuration file. This file lists only a subset +# of all parameters. For the syntax, and for a complete parameter +# list, see the postconf(5) manual page (command: "man 5 postconf"). +# +# For common configuration examples, see BASIC_CONFIGURATION_README +# and STANDARD_CONFIGURATION_README. To find these documents, use +# the command "postconf html_directory readme_directory", or go to +# http://www.postfix.org/. +# +# For best results, change no more than 2-3 parameters at a time, +# and test if Postfix still works after every change. + +# SOFT BOUNCE +# +# The soft_bounce parameter provides a limited safety net for +# testing. When soft_bounce is enabled, mail will remain queued that +# would otherwise bounce. This parameter disables locally-generated +# bounces, and prevents the SMTP server from rejecting mail permanently +# (by changing 5xx replies into 4xx replies). However, soft_bounce +# is no cure for address rewriting mistakes or mail routing mistakes. +# +#soft_bounce = no + +# LOCAL PATHNAME INFORMATION +# +# The queue_directory specifies the location of the Postfix queue. +# This is also the root directory of Postfix daemons that run chrooted. +# See the files in examples/chroot-setup for setting up Postfix chroot +# environments on different UNIX systems. +# +queue_directory = /var/spool/postfix + +# The command_directory parameter specifies the location of all +# postXXX commands. +# +command_directory = /usr/sbin + +# The daemon_directory parameter specifies the location of all Postfix +# daemon programs (i.e. programs listed in the master.cf file). This +# directory must be owned by root. +# +daemon_directory = /usr/lib64/postfix + +# The data_directory parameter specifies the location of Postfix-writable +# data files (caches, random numbers). This directory must be owned +# by the mail_owner account (see below). +# +data_directory = /var/lib/postfix + +# QUEUE AND PROCESS OWNERSHIP +# +# The mail_owner parameter specifies the owner of the Postfix queue +# and of most Postfix daemon processes. Specify the name of a user +# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS +# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In +# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED +# USER. +# +mail_owner = postfix + +# The default_privs parameter specifies the default rights used by +# the local delivery agent for delivery to external file or command. +# These rights are used in the absence of a recipient user context. +# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. +# +#default_privs = nobody + +# INTERNET HOST AND DOMAIN NAMES +# +# The myhostname parameter specifies the internet hostname of this +# mail system. The default is to use the fully-qualified domain name +# from gethostname(). $myhostname is used as a default value for many +# other configuration parameters. +# +#myhostname = host.domain.tld +#myhostname = virtual.domain.tld +myhostname = bruni.home.brehm-online.com + +# The mydomain parameter specifies the local internet domain name. +# The default is to use $myhostname minus the first component. +# $mydomain is used as a default value for many other configuration +# parameters. +# +#mydomain = domain.tld +mydomain = home.brehm-online.com + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user@that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +#myorigin = $myhostname +#myorigin = $mydomain +myorigin = brehm-online.com + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user@[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +#inet_interfaces = all +#inet_interfaces = $myhostname +#inet_interfaces = $myhostname, localhost +inet_interfaces = 10.12.11.2, localhost + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain. On a mail domain +# gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user@[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +#mydestination = $myhostname, localhost.$mydomain, localhost +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, +# mail.$mydomain, www.$mydomain, ftp.$mydomain + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user@domain.tld address. +# +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +#local_recipient_maps = + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +unknown_local_recipient_reject_code = 550 + +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = subnet), Postfix "trusts" SMTP +# clients in the same IP subnetworks as the local machine. +# On Linux, this does works correctly only with interfaces specified +# with the "ifconfig" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.189.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table +mynetworks = 10.12.11.0/24 + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_recipient_restrictions description in +# postconf(5) for detailed information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is $mydestination. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = $mydestination + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +#relayhost = $mydomain +#relayhost = [gateway.my.domain] +#relayhost = [mailserver.isp.tld] +#relayhost = uucphost +#relayhost = [an.ip.add.ress] + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user@domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +#alias_maps = dbm:/etc/aliases +#alias_maps = hash:/etc/aliases +#alias_maps = hash:/etc/aliases, nis:mail.aliases +#alias_maps = netinfo:/aliases + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +#alias_database = dbm:/etc/aliases +#alias_database = dbm:/etc/mail/aliases +#alias_database = hash:/etc/aliases +#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +#recipient_delimiter = + + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /some/where/procmail +#mailbox_command = /some/where/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#mailbox_transport = lmtp:unix:/file/name +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/file/name +#fallback_transport = cyrus +#fallback_transport = + +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user@other.host +#luser_relay = $local@other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +#header_checks = regexp:/etc/postfix/header_checks + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +#local_destination_concurrency_limit = 2 +#default_destination_concurrency_limit = 20 + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +debugger_command = + PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin + ddd $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen sesssion, su root and run "screen -r +# " where uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = /usr/sbin/sendmail + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = /usr/bin/newaliases + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = /usr/bin/mailq + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = postdrop + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = /usr/share/doc/postfix-2.8.7/html + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = /usr/share/man + +# sample_directory: The location of the Postfix sample configuration files. +# This parameter is obsolete as of Postfix 2.1. +# +sample_directory = /etc/postfix + +# readme_directory: The location of the Postfix README files. +# +readme_directory = /usr/share/doc/postfix-2.8.7/readme +home_mailbox = .maildir/ + +smtpd_sasl_auth_enable = yes +smtpd_sasl2_auth_enable = yes +smtpd_sasl_security_options = noanonymous +broken_sasl_auth_clients = yes +smtpd_sasl_local_domain = $myhostname + +# Authentifizierter Relay-Mail-Versand +smtp_sasl_auth_enable = yes +smtp_sasl_password_maps = hash:/etc/postfix/smtp_auth +smtp_sasl_security_options = noanonymous +relayhost = [mail.brehm-online.com] +#relayhost = [helga-six.brehm-online.com] + +smtpd_use_tls = yes +#smtpd_tls_auth_only = yes +smtpd_tls_key_file = /etc/postfix/postfix.pem +smtpd_tls_cert_file = /etc/postfix/postfix.pem +#smtpd_tls_CAfile = /etc/ssl/acwain-CA/CAcert.pem +smtpd_tls_loglevel = 1 +smtpd_tls_received_header = yes +smtpd_tls_session_cache_timeout = 3600s +tls_random_source = dev:/dev/urandom + +# schön tls verwenden +smtp_use_tls = yes +smtp_tls_key_file = /etc/postfix/postfix.pem +smtp_tls_cert_file = /etc/postfix/postfix.pem +#smtp_tls_CAfile = /etc/ssl/acwain-CA/CAcert.pem +# vermurkste zertifikate: egal +smtp_tls_enforce_peername = no + +#debug_peer_list = 217.237.40.156 + +inet_protocols = all diff --git a/config-archive/etc/postfix/main.cf.dist b/config-archive/etc/postfix/main.cf.dist index f08724a0..85273d81 100644 --- a/config-archive/etc/postfix/main.cf.dist +++ b/config-archive/etc/postfix/main.cf.dist @@ -5,7 +5,7 @@ # For common configuration examples, see BASIC_CONFIGURATION_README # and STANDARD_CONFIGURATION_README. To find these documents, use # the command "postconf html_directory readme_directory", or go to -# http://www.postfix.org/. +# http://www.postfix.org/BASIC_CONFIGURATION_README.html etc. # # For best results, change no more than 2-3 parameters at a time, # and test if Postfix still works after every change. @@ -640,7 +640,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.10.3/html +html_directory = /usr/share/doc/postfix-2.11.3/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -653,5 +653,5 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.10.3/readme +readme_directory = /usr/share/doc/postfix-2.11.3/readme home_mailbox = .maildir/ diff --git a/config-archive/etc/ssh/ssh_config b/config-archive/etc/ssh/ssh_config index 2c541179..9bec822b 100644 --- a/config-archive/etc/ssh/ssh_config +++ b/config-archive/etc/ssh/ssh_config @@ -58,5 +58,7 @@ Host * # PermitLocalCommand no # VisualHostKey no # ProxyCommand ssh -q -W %h:%p gateway.example.com +# RekeyLimit 1G 1h -# SendEnv LANG LC_* +# Send locale environment variables #367017 +#SendEnv LANG LC_* diff --git a/config-archive/etc/ssh/ssh_config.1 b/config-archive/etc/ssh/ssh_config.1 index cc30b7b7..2c541179 100644 --- a/config-archive/etc/ssh/ssh_config.1 +++ b/config-archive/etc/ssh/ssh_config.1 @@ -17,7 +17,9 @@ # list of available options, their meanings and defaults, please see the # ssh_config(5) man page. -# Host * +Host * +# ForwardAgent no +# ForwardX11 no ForwardAgent yes ForwardX11 yes # RhostsRSAAuthentication no @@ -56,3 +58,5 @@ # PermitLocalCommand no # VisualHostKey no # ProxyCommand ssh -q -W %h:%p gateway.example.com + +# SendEnv LANG LC_* diff --git a/config-archive/etc/ssh/ssh_config.2 b/config-archive/etc/ssh/ssh_config.2 new file mode 100644 index 00000000..cc30b7b7 --- /dev/null +++ b/config-archive/etc/ssh/ssh_config.2 @@ -0,0 +1,58 @@ +# $OpenBSD$ + +# This is the ssh client system-wide configuration file. See +# ssh_config(5) for more information. This file provides defaults for +# users, and the values can be changed in per-user configuration files +# or on the command line. + +# Configuration data is parsed as follows: +# 1. command line options +# 2. user-specific file +# 3. system-wide file +# Any configuration value is only changed the first time it is set. +# Thus, host-specific definitions should be at the beginning of the +# configuration file, and defaults at the end. + +# Site-wide defaults for some commonly used options. For a comprehensive +# list of available options, their meanings and defaults, please see the +# ssh_config(5) man page. + +# Host * + ForwardAgent yes + ForwardX11 yes +# RhostsRSAAuthentication no +# RSAAuthentication yes +# PasswordAuthentication yes +# HostbasedAuthentication no +# GSSAPIAuthentication no +# GSSAPIDelegateCredentials no +# BatchMode no +# CheckHostIP yes +# AddressFamily any +# ConnectTimeout 0 +# StrictHostKeyChecking ask +# IdentityFile ~/.ssh/identity +# IdentityFile ~/.ssh/id_rsa +# IdentityFile ~/.ssh/id_dsa +# Port 22 +# Protocol 2,1 +# Cipher 3des +# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc +# MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160 +# EscapeChar ~ +# AllowedCertPurpose sslserver +# MandatoryCRL no +# CACertificateFile /etc/ssh/ca/ca-bundle.crt +# CACertificatePath /etc/ssh/ca/crt +# CARevocationFile /etc/ssh/ca/ca-bundle.crl +# CARevocationPath /etc/ssh/ca/crl +# UserCACertificateFile ~/.ssh/ca-bundle.crt +# UserCACertificatePath ~/.ssh/crt +# UserCARevocationFile ~/.ssh/ca-bundle.crl +# UserCARevocationPath ~/.ssh/crl +# VAType none +# Tunnel no +# TunnelDevice any:any +# PermitLocalCommand no +# VisualHostKey no +# ProxyCommand ssh -q -W %h:%p gateway.example.com diff --git a/config-archive/etc/ssh/ssh_config.dist b/config-archive/etc/ssh/ssh_config.dist index fde6a764..42874fe9 100644 --- a/config-archive/etc/ssh/ssh_config.dist +++ b/config-archive/etc/ssh/ssh_config.dist @@ -1,4 +1,4 @@ -# $OpenBSD$ +# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $ # This is the ssh client system-wide configuration file. See # ssh_config(5) for more information. This file provides defaults for @@ -40,17 +40,6 @@ # Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc # MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160 # EscapeChar ~ -# AllowedCertPurpose sslserver -# MandatoryCRL no -# CACertificateFile /etc/ssh/ca/ca-bundle.crt -# CACertificatePath /etc/ssh/ca/crt -# CARevocationFile /etc/ssh/ca/ca-bundle.crl -# CARevocationPath /etc/ssh/ca/crl -# UserCACertificateFile ~/.ssh/ca-bundle.crt -# UserCACertificatePath ~/.ssh/crt -# UserCARevocationFile ~/.ssh/ca-bundle.crl -# UserCARevocationPath ~/.ssh/crl -# VAType none # Tunnel no # TunnelDevice any:any # PermitLocalCommand no diff --git a/config-archive/etc/ssh/sshd_config b/config-archive/etc/ssh/sshd_config index 75517570..7bbd37f7 100644 --- a/config-archive/etc/ssh/sshd_config +++ b/config-archive/etc/ssh/sshd_config @@ -24,6 +24,7 @@ #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key #HostKey /etc/ssh/ssh_host_ecdsa_key +#HostKey /etc/ssh/ssh_host_ed25519_key # "key type names" for X.509 certificates with RSA key # Note first defined is used in signature operations! @@ -153,8 +154,8 @@ PasswordAuthentication no #GSSAPICleanupCredentials yes #GSSAPIStrictAcceptorCheck yes -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass @@ -170,6 +171,7 @@ UsePAM yes X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes +#PermitTTY yes PrintMotd no PrintLastLog no #TCPKeepAlive yes @@ -213,6 +215,7 @@ Subsystem sftp /usr/lib64/misc/sftp-server #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no +# PermitTTY no # ForceCommand cvs server # Allow client to pass locale environment variables #367017 diff --git a/config-archive/etc/ssh/sshd_config.1 b/config-archive/etc/ssh/sshd_config.1 index fac258de..75517570 100644 --- a/config-archive/etc/ssh/sshd_config.1 +++ b/config-archive/etc/ssh/sshd_config.1 @@ -27,8 +27,8 @@ # "key type names" for X.509 certificates with RSA key # Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 #X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 +#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 # "key type names" for X.509 certificates with DSA key # Note first defined is used in signature operations! @@ -95,6 +95,9 @@ #KeyRegenerationInterval 1h #ServerKeyBits 1024 +# Ciphers and keying +#RekeyLimit default none + # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH @@ -116,6 +119,11 @@ PermitRootLogin yes # but this is overridden so installations will only check .ssh/authorized_keys #AuthorizedKeysFile .ssh/authorized_keys +#AuthorizedPrincipalsFile none + +#AuthorizedKeysCommand none +#AuthorizedKeysCommandUser nobody + # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 @@ -166,16 +174,17 @@ PrintMotd no PrintLastLog no #TCPKeepAlive yes #UseLogin no -#UsePrivilegeSeparation yes +UsePrivilegeSeparation sandbox # Default for new installations. #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid -#MaxStartups 10 +#MaxStartups 10:30:100 #PermitTunnel no #ChrootDirectory none +#VersionAddendum none # no default banner path #Banner none @@ -190,18 +199,21 @@ Subsystem sftp /usr/lib64/misc/sftp-server # tcp receive buffer polling. disable in non autotuning kernels #TcpRcvBufPoll yes -# allow the use of the none cipher -#NoneEnabled no - -# disable hpn performance boosts. +# disable hpn performance boosts #HPNDisabled no # buffer size for hpn to non-hpn connections #HPNBufferSize 2048 +# allow the use of the none cipher +#NoneEnabled no + # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no # ForceCommand cvs server + +# Allow client to pass locale environment variables #367017 +AcceptEnv LANG LC_* diff --git a/config-archive/etc/ssh/sshd_config.2 b/config-archive/etc/ssh/sshd_config.2 index 176bf48d..fac258de 100644 --- a/config-archive/etc/ssh/sshd_config.2 +++ b/config-archive/etc/ssh/sshd_config.2 @@ -7,7 +7,7 @@ # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options change a +# possible, but leave them commented. Uncommented options override the # default value. #Port 22 @@ -103,13 +103,17 @@ # Authentication: #LoginGraceTime 2m -PermitRootLogin no +#PermitRootLogin no +PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 #RSAAuthentication yes #PubkeyAuthentication yes + +# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 +# but this is overridden so installations will only check .ssh/authorized_keys #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts @@ -139,6 +143,7 @@ PasswordAuthentication no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes +#GSSAPIStrictAcceptorCheck yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -175,6 +180,9 @@ PrintLastLog no # no default banner path #Banner none +# Allow client to pass locale environment variables +AcceptEnv LANG LC_* + # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server diff --git a/config-archive/etc/ssh/sshd_config.3 b/config-archive/etc/ssh/sshd_config.3 index 9f5583ea..176bf48d 100644 --- a/config-archive/etc/ssh/sshd_config.3 +++ b/config-archive/etc/ssh/sshd_config.3 @@ -1,4 +1,4 @@ -# $OpenBSD: sshd_config,v 1.82 2010/09/06 17:10:19 naddy Exp $ +# $OpenBSD$ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -175,22 +175,6 @@ PrintLastLog no # no default banner path #Banner none -# here are the new patched ldap related tokens -# entries in your LDAP must have posixAccount & ldapPublicKey objectclass -#UseLPK yes -#LpkLdapConf /etc/ldap.conf -#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/ -#LpkUserDN ou=users,dc=phear,dc=org -#LpkGroupDN ou=groups,dc=phear,dc=org -#LpkBindDN cn=Manager,dc=phear,dc=org -#LpkBindPw secret -#LpkServerGroup mail -#LpkFilter (hostAccess=master.phear.org) -#LpkForceTLS no -#LpkSearchTimelimit 3 -#LpkBindTimelimit 3 -#LpkPubKeyAttr sshPublicKey - # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server diff --git a/config-archive/etc/ssh/sshd_config.4 b/config-archive/etc/ssh/sshd_config.4 index f3c6c252..9f5583ea 100644 --- a/config-archive/etc/ssh/sshd_config.4 +++ b/config-archive/etc/ssh/sshd_config.4 @@ -1,4 +1,4 @@ -# $OpenBSD$ +# $OpenBSD: sshd_config,v 1.82 2010/09/06 17:10:19 naddy Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -175,8 +175,24 @@ PrintLastLog no # no default banner path #Banner none +# here are the new patched ldap related tokens +# entries in your LDAP must have posixAccount & ldapPublicKey objectclass +#UseLPK yes +#LpkLdapConf /etc/ldap.conf +#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/ +#LpkUserDN ou=users,dc=phear,dc=org +#LpkGroupDN ou=groups,dc=phear,dc=org +#LpkBindDN cn=Manager,dc=phear,dc=org +#LpkBindPw secret +#LpkServerGroup mail +#LpkFilter (hostAccess=master.phear.org) +#LpkForceTLS no +#LpkSearchTimelimit 3 +#LpkBindTimelimit 3 +#LpkPubKeyAttr sshPublicKey + # override default of no subsystems -Subsystem sftp /usr/lib/misc/sftp-server +Subsystem sftp /usr/lib64/misc/sftp-server # the following are HPN related configuration options # tcp receive buffer polling. disable in non autotuning kernels diff --git a/config-archive/etc/ssh/sshd_config.5 b/config-archive/etc/ssh/sshd_config.5 new file mode 100644 index 00000000..f3c6c252 --- /dev/null +++ b/config-archive/etc/ssh/sshd_config.5 @@ -0,0 +1,199 @@ +# $OpenBSD$ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options change a +# default value. + +#Port 22 +#AddressFamily any +#ListenAddress 0.0.0.0 +#ListenAddress :: + +# The default requires explicit activation of protocol 1 +#Protocol 2 + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +#HostKey /etc/ssh/ssh_host_rsa_key +#HostKey /etc/ssh/ssh_host_dsa_key +#HostKey /etc/ssh/ssh_host_ecdsa_key + +# "key type names" for X.509 certificates with RSA key +# Note first defined is used in signature operations! +#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 +#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 + +# "key type names" for X.509 certificates with DSA key +# Note first defined is used in signature operations! +#X509KeyAlgorithm x509v3-sign-dss,dss-asn1 +#X509KeyAlgorithm x509v3-sign-dss,dss-raw + +# The intended use for the X509 client certificate. Without this option +# no chain verification will be done. Currently accepted uses are case +# insensitive: +# - "sslclient", "SSL client", "SSL_client" or "client" +# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose" +# - "skip" or ""(empty): don`t check purpose. +#AllowedCertPurpose sslclient + +# Specifies whether self-issued(self-signed) X.509 certificate can be +# allowed only by entry in AutorizedKeysFile that contain matching +# public key or certificate blob. +#KeyAllowSelfIssued no + +# Specifies whether CRL must present in store for all certificates in +# certificate chain with atribute "cRLDistributionPoints" +#MandatoryCRL no + +# A file with multiple certificates of certificate signers +# in PEM format concatenated together. +#CACertificateFile /etc/ssh/ca/ca-bundle.crt + +# A directory with certificates of certificate signers. +# The certificates should have name of the form: [HASH].[NUMBER] +# or have symbolic links to them of this form. +#CACertificatePath /etc/ssh/ca/crt + +# A file with multiple CRL of certificate signers +# in PEM format concatenated together. +#CARevocationFile /etc/ssh/ca/ca-bundle.crl + +# A directory with CRL of certificate signers. +# The CRL should have name of the form: [HASH].r[NUMBER] +# or have symbolic links to them of this form. +#CARevocationPath /etc/ssh/ca/crl + +# LDAP protocol version. +# Example: +# CAldapVersion 2 + +# Note because of OpenSSH options parser limitation +# use %3D instead of = ! +# LDAP initialization may require URL to be escaped, i.e. +# use %2C instead of ,(comma). Escaped URL don't depend from +# LDAP initialization method. +# Example: +# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom + +# SSH can use "Online Certificate Status Protocol"(OCSP) +# to validate certificate. Set VAType to +# - none : do not use OCSP to validate certificates; +# - ocspcert: validate only certificates that specify `OCSP +# Service Locator' URL; +# - ocspspec: use specified in the configuration 'OCSP Responder' +# to validate all certificates. +#VAType none + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 1024 + +# Logging +# obsoletes QuietMode and FascistLogging +#SyslogFacility AUTH +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +PermitRootLogin no +#StrictModes yes +#MaxAuthTries 6 +#MaxSessions 10 + +#RSAAuthentication yes +#PubkeyAuthentication yes +#AuthorizedKeysFile .ssh/authorized_keys + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +#RhostsRSAAuthentication no +# similar for protocol version 2 +#HostbasedAuthentication no +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no +# Don't read the user's ~/.rhosts and ~/.shosts files +#IgnoreRhosts yes + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication no +#PasswordAuthentication yes +#PermitEmptyPasswords no + +# Change to no to disable s/key passwords +#ChallengeResponseAuthentication yes + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no + +# GSSAPI options +#GSSAPIAuthentication no +#GSSAPICleanupCredentials yes + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +UsePAM yes + +#AllowAgentForwarding yes +#AllowTcpForwarding yes +#GatewayPorts no +X11Forwarding yes +#X11DisplayOffset 10 +#X11UseLocalhost yes +PrintMotd no +PrintLastLog no +#TCPKeepAlive yes +#UseLogin no +#UsePrivilegeSeparation yes +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#UseDNS yes +#PidFile /var/run/sshd.pid +#MaxStartups 10 +#PermitTunnel no +#ChrootDirectory none + +# no default banner path +#Banner none + +# override default of no subsystems +Subsystem sftp /usr/lib/misc/sftp-server + +# the following are HPN related configuration options +# tcp receive buffer polling. disable in non autotuning kernels +#TcpRcvBufPoll yes + +# allow the use of the none cipher +#NoneEnabled no + +# disable hpn performance boosts. +#HPNDisabled no + +# buffer size for hpn to non-hpn connections +#HPNBufferSize 2048 + + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server diff --git a/config-archive/etc/ssh/sshd_config.dist b/config-archive/etc/ssh/sshd_config.dist index c76351aa..5683e167 100644 --- a/config-archive/etc/ssh/sshd_config.dist +++ b/config-archive/etc/ssh/sshd_config.dist @@ -1,4 +1,4 @@ -# $OpenBSD$ +# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -26,72 +26,6 @@ #HostKey /etc/ssh/ssh_host_ecdsa_key #HostKey /etc/ssh/ssh_host_ed25519_key -# "key type names" for X.509 certificates with RSA key -# Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 -#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 - -# "key type names" for X.509 certificates with DSA key -# Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-dss,dss-asn1 -#X509KeyAlgorithm x509v3-sign-dss,dss-raw - -# The intended use for the X509 client certificate. Without this option -# no chain verification will be done. Currently accepted uses are case -# insensitive: -# - "sslclient", "SSL client", "SSL_client" or "client" -# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose" -# - "skip" or ""(empty): don`t check purpose. -#AllowedCertPurpose sslclient - -# Specifies whether self-issued(self-signed) X.509 certificate can be -# allowed only by entry in AutorizedKeysFile that contain matching -# public key or certificate blob. -#KeyAllowSelfIssued no - -# Specifies whether CRL must present in store for all certificates in -# certificate chain with atribute "cRLDistributionPoints" -#MandatoryCRL no - -# A file with multiple certificates of certificate signers -# in PEM format concatenated together. -#CACertificateFile /etc/ssh/ca/ca-bundle.crt - -# A directory with certificates of certificate signers. -# The certificates should have name of the form: [HASH].[NUMBER] -# or have symbolic links to them of this form. -#CACertificatePath /etc/ssh/ca/crt - -# A file with multiple CRL of certificate signers -# in PEM format concatenated together. -#CARevocationFile /etc/ssh/ca/ca-bundle.crl - -# A directory with CRL of certificate signers. -# The CRL should have name of the form: [HASH].r[NUMBER] -# or have symbolic links to them of this form. -#CARevocationPath /etc/ssh/ca/crl - -# LDAP protocol version. -# Example: -# CAldapVersion 2 - -# Note because of OpenSSH options parser limitation -# use %3D instead of = ! -# LDAP initialization may require URL to be escaped, i.e. -# use %2C instead of ,(comma). Escaped URL don't depend from -# LDAP initialization method. -# Example: -# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom - -# SSH can use "Online Certificate Status Protocol"(OCSP) -# to validate certificate. Set VAType to -# - none : do not use OCSP to validate certificates; -# - ocspcert: validate only certificates that specify `OCSP -# Service Locator' URL; -# - ocspspec: use specified in the configuration 'OCSP Responder' -# to validate all certificates. -#VAType none - # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 @@ -189,13 +123,29 @@ UsePrivilegeSeparation sandbox # Default for new installations. # no default banner path #Banner none +# here are the new patched ldap related tokens +# entries in your LDAP must have posixAccount & ldapPublicKey objectclass +#UseLPK yes +#LpkLdapConf /etc/ldap.conf +#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/ +#LpkUserDN ou=users,dc=phear,dc=org +#LpkGroupDN ou=groups,dc=phear,dc=org +#LpkBindDN cn=Manager,dc=phear,dc=org +#LpkBindPw secret +#LpkServerGroup mail +#LpkFilter (hostAccess=master.phear.org) +#LpkForceTLS no +#LpkSearchTimelimit 3 +#LpkBindTimelimit 3 +#LpkPubKeyAttr sshPublicKey + # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server # the following are HPN related configuration options # tcp receive buffer polling. disable in non autotuning kernels #TcpRcvBufPoll yes - + # disable hpn performance boosts #HPNDisabled no diff --git a/config-archive/etc/sudoers b/config-archive/etc/sudoers index 35c422c1..15ae4fb6 100644 --- a/config-archive/etc/sudoers +++ b/config-archive/etc/sudoers @@ -82,6 +82,8 @@ root ALL=(ALL) ALL frank ALL=(ALL) NOPASSWD: ALL +backuppc ALL = NOPASSWD: /bin/tar + ## Uncomment to allow any user to run sudo if they know the password ## of the user they are running the command as (root by default). # Defaults targetpw # Ask for the password of the target user diff --git a/config-archive/etc/sudoers.1 b/config-archive/etc/sudoers.1 new file mode 100644 index 00000000..35c422c1 --- /dev/null +++ b/config-archive/etc/sudoers.1 @@ -0,0 +1,92 @@ +## sudoers file. +## +## This file MUST be edited with the 'visudo' command as root. +## Failure to use 'visudo' may result in syntax or file permission errors +## that prevent sudo from running. +## +## See the sudoers man page for the details on how to write a sudoers file. +## + +## +## Host alias specification +## +## Groups of machines. These may include host names (optionally with wildcards), +## IP addresses, network numbers or netgroups. +# Host_Alias WEBSERVERS = www1, www2, www3 + +## +## User alias specification +## +## Groups of users. These may consist of user names, uids, Unix groups, +## or netgroups. +# User_Alias ADMINS = millert, dowdy, mikef + +## +## Cmnd alias specification +## +## Groups of commands. Often used to group related commands together. +# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \ +# /usr/bin/pkill, /usr/bin/top + +## +## Defaults specification +## +## You may wish to keep some of the following environment variables +## when running commands via sudo. +## +## Locale settings +# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET" +## +## Run X applications through sudo; HOME is used to find the +## .Xauthority file. Note that other programs use HOME to find +## configuration files and this may lead to privilege escalation! +# Defaults env_keep += "HOME" +## +## X11 resource path settings +# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH" +## +## Desktop path settings +# Defaults env_keep += "QTDIR KDEDIR" +## +## Allow sudo-run commands to inherit the callers' ConsoleKit session +# Defaults env_keep += "XDG_SESSION_COOKIE" +## +## Uncomment to enable special input methods. Care should be taken as +## this may allow users to subvert the command being run via sudo. +# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER" +## +## Uncomment to enable logging of a command's output, except for +## sudoreplay and reboot. Use sudoreplay to play back logged sessions. +# Defaults log_output +# Defaults!/usr/bin/sudoreplay !log_output +# Defaults!/usr/local/bin/sudoreplay !log_output +# Defaults!/sbin/reboot !log_output + +## +## Runas alias specification +## + +## +## User privilege specification +## +root ALL=(ALL) ALL + +## Uncomment to allow members of group wheel to execute any command +# %wheel ALL=(ALL) ALL + +## Same thing without a password +# %wheel ALL=(ALL) NOPASSWD: ALL + +## Uncomment to allow members of group sudo to execute any command +# %sudo ALL=(ALL) ALL + +frank ALL=(ALL) NOPASSWD: ALL + +## Uncomment to allow any user to run sudo if they know the password +## of the user they are running the command as (root by default). +# Defaults targetpw # Ask for the password of the target user +# ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw' + +## Read drop-in files from /etc/sudoers.d +## (the '#' here does not indicate a comment) +#includedir /etc/sudoers.d diff --git a/config-archive/etc/sudoers.dist b/config-archive/etc/sudoers.dist new file mode 100644 index 00000000..4808d473 --- /dev/null +++ b/config-archive/etc/sudoers.dist @@ -0,0 +1,91 @@ +## sudoers file. +## +## This file MUST be edited with the 'visudo' command as root. +## Failure to use 'visudo' may result in syntax or file permission errors +## that prevent sudo from running. +## +## See the sudoers man page for the details on how to write a sudoers file. +## + +## +## Host alias specification +## +## Groups of machines. These may include host names (optionally with wildcards), +## IP addresses, network numbers or netgroups. +# Host_Alias WEBSERVERS = www1, www2, www3 + +## +## User alias specification +## +## Groups of users. These may consist of user names, uids, Unix groups, +## or netgroups. +# User_Alias ADMINS = millert, dowdy, mikef + +## +## Cmnd alias specification +## +## Groups of commands. Often used to group related commands together. +# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \ +# /usr/bin/pkill, /usr/bin/top +# Cmnd_Alias REBOOT = /sbin/halt, /sbin/reboot, /sbin/poweroff + +## +## Defaults specification +## +## You may wish to keep some of the following environment variables +## when running commands via sudo. +## +## Locale settings +# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET" +## +## Run X applications through sudo; HOME is used to find the +## .Xauthority file. Note that other programs use HOME to find +## configuration files and this may lead to privilege escalation! +# Defaults env_keep += "HOME" +## +## X11 resource path settings +# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH" +## +## Desktop path settings +# Defaults env_keep += "QTDIR KDEDIR" +## +## Allow sudo-run commands to inherit the callers' ConsoleKit session +# Defaults env_keep += "XDG_SESSION_COOKIE" +## +## Uncomment to enable special input methods. Care should be taken as +## this may allow users to subvert the command being run via sudo. +# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER" +## +## Uncomment to enable logging of a command's output, except for +## sudoreplay and reboot. Use sudoreplay to play back logged sessions. +# Defaults log_output +# Defaults!/usr/bin/sudoreplay !log_output +# Defaults!/usr/local/bin/sudoreplay !log_output +# Defaults!REBOOT !log_output + +## +## Runas alias specification +## + +## +## User privilege specification +## +root ALL=(ALL) ALL + +## Uncomment to allow members of group wheel to execute any command +# %wheel ALL=(ALL) ALL + +## Same thing without a password +# %wheel ALL=(ALL) NOPASSWD: ALL + +## Uncomment to allow members of group sudo to execute any command +# %sudo ALL=(ALL) ALL + +## Uncomment to allow any user to run sudo if they know the password +## of the user they are running the command as (root by default). +# Defaults targetpw # Ask for the password of the target user +# ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw' + +## Read drop-in files from /etc/sudoers.d +## (the '#' here does not indicate a comment) +#includedir /etc/sudoers.d diff --git a/config-archive/etc/sudoers.dist.new b/config-archive/etc/sudoers.dist.new deleted file mode 100644 index 0d7760be..00000000 --- a/config-archive/etc/sudoers.dist.new +++ /dev/null @@ -1,90 +0,0 @@ -## sudoers file. -## -## This file MUST be edited with the 'visudo' command as root. -## Failure to use 'visudo' may result in syntax or file permission errors -## that prevent sudo from running. -## -## See the sudoers man page for the details on how to write a sudoers file. -## - -## -## Host alias specification -## -## Groups of machines. These may include host names (optionally with wildcards), -## IP addresses, network numbers or netgroups. -# Host_Alias WEBSERVERS = www1, www2, www3 - -## -## User alias specification -## -## Groups of users. These may consist of user names, uids, Unix groups, -## or netgroups. -# User_Alias ADMINS = millert, dowdy, mikef - -## -## Cmnd alias specification -## -## Groups of commands. Often used to group related commands together. -# Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \ -# /usr/bin/pkill, /usr/bin/top - -## -## Defaults specification -## -## You may wish to keep some of the following environment variables -## when running commands via sudo. -## -## Locale settings -# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET" -## -## Run X applications through sudo; HOME is used to find the -## .Xauthority file. Note that other programs use HOME to find -## configuration files and this may lead to privilege escalation! -# Defaults env_keep += "HOME" -## -## X11 resource path settings -# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH" -## -## Desktop path settings -# Defaults env_keep += "QTDIR KDEDIR" -## -## Allow sudo-run commands to inherit the callers' ConsoleKit session -# Defaults env_keep += "XDG_SESSION_COOKIE" -## -## Uncomment to enable special input methods. Care should be taken as -## this may allow users to subvert the command being run via sudo. -# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER" -## -## Uncomment to enable logging of a command's output, except for -## sudoreplay and reboot. Use sudoreplay to play back logged sessions. -# Defaults log_output -# Defaults!/usr/bin/sudoreplay !log_output -# Defaults!/usr/local/bin/sudoreplay !log_output -# Defaults!/sbin/reboot !log_output - -## -## Runas alias specification -## - -## -## User privilege specification -## -root ALL=(ALL) ALL - -## Uncomment to allow members of group wheel to execute any command -# %wheel ALL=(ALL) ALL - -## Same thing without a password -# %wheel ALL=(ALL) NOPASSWD: ALL - -## Uncomment to allow members of group sudo to execute any command -# %sudo ALL=(ALL) ALL - -## Uncomment to allow any user to run sudo if they know the password -## of the user they are running the command as (root by default). -# Defaults targetpw # Ask for the password of the target user -# ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw' - -## Read drop-in files from /etc/sudoers.d -## (the '#' here does not indicate a comment) -#includedir /etc/sudoers.d diff --git a/config-archive/etc/ulogd.conf b/config-archive/etc/ulogd.conf index 348e8007..b58522d7 100644 --- a/config-archive/etc/ulogd.conf +++ b/config-archive/etc/ulogd.conf @@ -1,27 +1,17 @@ # Example configuration for ulogd -# $Id: ulogd.conf.in 714 2005-02-19 21:33:43Z laforge $ -# +# Adapted to Debian by Achilleas Kotsis [global] ###################################################################### # GLOBAL OPTIONS ###################################################################### -# netlink multicast group (the same as the iptables --ulog-nlgroup param) -nlgroup=1 # logfile for status messages -logfile="/var/log/fw/ulogd.log" - -# loglevel: debug(1), info(3), notice(5), error(7) or fatal(8) -loglevel=5 - -# socket receive buffer size (should be at least the size of the -# in-kernel buffer (ipt_ULOG.o 'nlbufsiz' parameter) -rmem=131071 +logfile="/var/log/ulogd/ulogd.log" -# libipulog/ulogd receive buffer size, should be > rmem -bufsize=150000 +# loglevel: debug(1), info(3), notice(5), error(7) or fatal(8) (default 5) +# loglevel=1 ###################################################################### # PLUGIN OPTIONS @@ -34,51 +24,273 @@ bufsize=150000 # 2. options for each plugin in seperate section below -# -# ulogd_BASE.so - interpreter plugin for basic IPv4 header fields -# you will always need this -plugin="/usr/lib64/ulogd/ulogd_BASE.so" +plugin="/usr/lib64/ulogd/ulogd_inppkt_NFLOG.so" +#plugin="/usr/lib64/ulogd/ulogd_inppkt_ULOG.so" +#plugin="/usr/lib64/ulogd/ulogd_inppkt_UNIXSOCK.so" +plugin="/usr/lib64/ulogd/ulogd_inpflow_NFCT.so" +plugin="/usr/lib64/ulogd/ulogd_filter_IFINDEX.so" +plugin="/usr/lib64/ulogd/ulogd_filter_IP2STR.so" +plugin="/usr/lib64/ulogd/ulogd_filter_IP2BIN.so" +#plugin="/usr/lib64/ulogd/ulogd_filter_IP2HBIN.so" +plugin="/usr/lib64/ulogd/ulogd_filter_PRINTPKT.so" +plugin="/usr/lib64/ulogd/ulogd_filter_HWHDR.so" +plugin="/usr/lib64/ulogd/ulogd_filter_PRINTFLOW.so" +#plugin="/usr/lib64/ulogd/ulogd_filter_MARK.so" +plugin="/usr/lib64/ulogd/ulogd_output_LOGEMU.so" +plugin="/usr/lib64/ulogd/ulogd_output_SYSLOG.so" +plugin="/usr/lib64/ulogd/ulogd_output_XML.so" +#plugin="/usr/lib64/ulogd/ulogd_output_SQLITE3.so" +plugin="/usr/lib64/ulogd/ulogd_output_GPRINT.so" +#plugin="/usr/lib64/ulogd/ulogd_output_NACCT.so" +#plugin="/usr/lib64/ulogd/ulogd_output_PCAP.so" +#plugin="/usr/lib64/ulogd/ulogd_output_PGSQL.so" +#plugin="/usr/lib64/ulogd/ulogd_output_MYSQL.so" +#plugin="/usr/lib64/ulogd/ulogd_output_DBI.so" +plugin="/usr/lib64/ulogd/ulogd_raw2packet_BASE.so" +plugin="/usr/lib64/ulogd/ulogd_inpflow_NFACCT.so" +plugin="/usr/lib64/ulogd/ulogd_output_GRAPHITE.so" + +# this is a stack for logging packet send by system via LOGEMU +stack=log1:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU + +# this is a stack for packet-based logging via LOGEMU +stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU + +# this is a stack for ULOG packet-based logging via LOGEMU +stack=ulog1:ULOG,base1:BASE,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU + +# this is a stack for packet-based logging via LOGEMU with filtering on MARK +#stack=log2:NFLOG,mark1:MARK,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU + +# this is a stack for packet-based logging via GPRINT +#stack=log1:NFLOG,gp1:GPRINT + +# this is a stack for flow-based logging via LOGEMU +#stack=ct1:NFCT,ip2str1:IP2STR,print1:PRINTFLOW,emu1:LOGEMU + +# this is a stack for flow-based logging via GPRINT +#stack=ct1:NFCT,gp1:GPRINT + +# this is a stack for flow-based logging via XML +#stack=ct1:NFCT,xml1:XML + +# this is a stack for logging in XML +#stack=log1:NFLOG,xml1:XML + +# this is a stack for accounting-based logging via XML +#stack=acct1:NFACCT,xml1:XML + +# this is a stack for accounting-based logging to a Graphite server +#stack=acct1:NFACCT,graphite1:GRAPHITE + +# this is a stack for NFLOG packet-based logging to PCAP +#stack=log2:NFLOG,base1:BASE,pcap1:PCAP + +# this is a stack for logging packet to MySQL +#stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2bin1:IP2BIN,mac2str1:HWHDR,mysql1:MYSQL + +# this is a stack for logging packet to PGsql after a collect via NFLOG +#stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,mac2str1:HWHDR,pgsql1:PGSQL + +# this is a stack for logging packets to syslog after a collect via NFLOG +#stack=log3:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,sys1:SYSLOG + +# this is a stack for logging packets to syslog after a collect via NuFW +#stack=nuauth1:UNIXSOCK,base1:BASE,ip2str1:IP2STR,print1:PRINTPKT,sys1:SYSLOG + +# this is a stack for flow-based logging to MySQL +#stack=ct1:NFCT,ip2bin1:IP2BIN,mysql2:MYSQL + +# this is a stack for flow-based logging to PGSQL +#stack=ct1:NFCT,ip2str1:IP2STR,pgsql2:PGSQL + +# this is a stack for flow-based logging to PGSQL without local hash +#stack=ct1:NFCT,ip2str1:IP2STR,pgsql3:PGSQL + +# this is a stack for flow-based logging to SQLITE3 +#stack=ct1:NFCT,sqlite3_ct:SQLITE3 + +# this is a stack for logging packet to SQLITE3 +#stack=log1:NFLOG,sqlite3_pkt:SQLITE3 + +# this is a stack for flow-based logging in NACCT compatible format +#stack=ct1:NFCT,ip2str1:IP2STR,nacct1:NACCT + +# this is a stack for accounting-based logging via GPRINT +#stack=acct1:NFACCT,gp1:GPRINT + +[ct1] +#netlink_socket_buffer_size=217088 +#netlink_socket_buffer_maxsize=1085440 +#netlink_resync_timeout=60 # seconds to wait to perform resynchronization +#pollinterval=10 # use poll-based logging instead of event-driven +# If pollinterval is not set, NFCT plugin will work in event mode +# In this case, you can use the following filters on events: +#accept_src_filter=192.168.1.0/24,1:2::/64 # source ip of connection must belong to these networks +#accept_dst_filter=192.168.1.0/24 # destination ip of connection must belong to these networks +#accept_proto_filter=tcp,sctp # layer 4 proto of connections + +[ct2] +#netlink_socket_buffer_size=217088 +#netlink_socket_buffer_maxsize=1085440 +#reliable=1 # enable reliable flow-based logging (may drop packets) +hash_enable=0 + +# Logging of system packet through NFLOG +[log1] +# netlink multicast group (the same as the iptables --nflog-group param) +# Group O is used by the kernel to log connection tracking invalid message +group=0 +#netlink_socket_buffer_size=217088 +#netlink_socket_buffer_maxsize=1085440 +# set number of packet to queue inside kernel +#netlink_qthreshold=1 +# set the delay before flushing packet in the queue inside kernel (in 10ms) +#netlink_qtimeout=100 +# packet logging through NFLOG for group 1 +[log2] +# netlink multicast group (the same as the iptables --nflog-group param) +group=1 # Group has to be different from the one use in log1 +#netlink_socket_buffer_size=217088 +#netlink_socket_buffer_maxsize=1085440 +# If your kernel is older than 2.6.29 and if a NFLOG input plugin with +# group 0 is not used by any stack, you need to have at least one NFLOG +# input plugin with bind set to 1. If you don't do that you may not +# receive any message from the kernel. +#bind=1 -# output plugins. -plugin="/usr/lib64/ulogd/ulogd_LOGEMU.so" -#plugin="/usr/lib64/ulogd/ulogd_OPRINT.so" -#plugin="/usr/lib64/ulogd/ulogd_MYSQL.so" -#plugin="/usr/lib64/ulogd/ulogd_PGSQL.so" -#plugin="/usr/lib64/ulogd/ulogd_SQLITE3.so" -#plugin="/usr/lib64/ulogd/ulogd_PCAP.so" +# packet logging through NFLOG for group 2, numeric_label is +# set to 1 +[log3] +# netlink multicast group (the same as the iptables --nflog-group param) +group=2 # Group has to be different from the one use in log1/log2 +numeric_label=1 # you can label the log info based on the packet verdict +#netlink_socket_buffer_size=217088 +#netlink_socket_buffer_maxsize=1085440 +#bind=1 +[ulog1] +# netlink multicast group (the same as the iptables --ulog-nlgroup param) +nlgroup=1 +#numeric_label=0 # optional argument + +[nuauth1] +socket_path="/run/nuauth_ulogd2.sock" + +[emu1] +file="/var/log/ulogd/syslogemu.log" +sync=1 + +[op1] +file="/var/log/ulogd/oprint.log" +sync=1 -[LOGEMU] -#file="/var/log/ulogd.syslogemu" -file="/var/log/fw/iptables.log" +[gp1] +file="/var/log/ulogd/gprint.log" sync=1 +timestamp=1 -[OPRINT] -#file="/var/log/ulogd.pktlog" -file="/var/log/fw/ulogd.pktlog" +[xml1] +directory="/var/log/ulogd/" +sync=1 -[MYSQL] +[pcap1] +#default file is /var/log/ulogd/ulogd.pcap +#file=/var/log/ulogd/ulogd.pcap +sync=1 + +[mysql1] +db="nulog" +host="localhost" +user="nupik" table="ulog" pass="changeme" -user="laforge" -db="ulogd" +procedure="INSERT_PACKET_FULL" + +[mysql2] +db="nulog" host="localhost" +user="nupik" +table="conntrack" +pass="changeme" +procedure="INSERT_CT" -[PGSQL] +[pgsql1] +db="nulog" +host="localhost" +user="nupik" table="ulog" -schema="public" +#schema="public" +pass="changeme" +procedure="INSERT_PACKET_FULL" + +[pgsql2] +db="nulog" +host="localhost" +user="nupik" +table="ulog2_ct" +#schema="public" +pass="changeme" +procedure="INSERT_CT" + +[pgsql3] +db="nulog" +host="localhost" +user="nupik" +table="ulog2_ct" +#schema="public" pass="changeme" -user="postgres" -db="ulogd" +procedure="INSERT_OR_REPLACE_CT" + +[pgsql4] +db="nulog" host="localhost" +user="nupik" +table="nfacct" +#schema="public" +pass="changeme" +procedure="INSERT_NFACCT" -[SQLITE3] +[dbi1] +db="ulog2" +dbtype="pgsql" +host="localhost" +user="ulog2" table="ulog" -db="/path/to/sqlite/db" +pass="ulog2" +procedure="INSERT_PACKET_FULL" + +[sqlite3_ct] +table="ulog_ct" +db="/var/log/ulogd/ulogd.sqlite3db" buffer=200 -[PCAP] -file="/var/log/ulogd.pcap" -sync=1 +[sqlite3_pkt] +table="ulog_pkt" +db="/var/log/ulogd/ulogd.sqlite3db" +buffer=200 + +[sys2] +facility=LOG_LOCAL2 + +[nacct1] +sync = 1 +#file = /var/log/ulogd/ulogd_nacct.log + +[mark1] +mark = 1 + +[acct1] +pollinterval = 2 +# If set to 0, we don't reset the counters for each polling (default is 1). +#zerocounter = 0 +# Set timestamp (default is 0, which means not set). This timestamp can be +# interpreted by the output plugin. +#timestamp = 1 +[graphite1] +host="127.0.0.1" +port="2003" +# Prefix of data name sent to graphite server +prefix="netfilter.nfacct" diff --git a/config-archive/etc/ulogd.conf.1 b/config-archive/etc/ulogd.conf.1 new file mode 100644 index 00000000..348e8007 --- /dev/null +++ b/config-archive/etc/ulogd.conf.1 @@ -0,0 +1,84 @@ +# Example configuration for ulogd +# $Id: ulogd.conf.in 714 2005-02-19 21:33:43Z laforge $ +# + +[global] +###################################################################### +# GLOBAL OPTIONS +###################################################################### + +# netlink multicast group (the same as the iptables --ulog-nlgroup param) +nlgroup=1 + +# logfile for status messages +logfile="/var/log/fw/ulogd.log" + +# loglevel: debug(1), info(3), notice(5), error(7) or fatal(8) +loglevel=5 + +# socket receive buffer size (should be at least the size of the +# in-kernel buffer (ipt_ULOG.o 'nlbufsiz' parameter) +rmem=131071 + +# libipulog/ulogd receive buffer size, should be > rmem +bufsize=150000 + +###################################################################### +# PLUGIN OPTIONS +###################################################################### + +# We have to configure and load all the plugins we want to use + +# general rules: +# 1. load the plugins _first_ from the global section +# 2. options for each plugin in seperate section below + + +# +# ulogd_BASE.so - interpreter plugin for basic IPv4 header fields +# you will always need this +plugin="/usr/lib64/ulogd/ulogd_BASE.so" + + +# output plugins. +plugin="/usr/lib64/ulogd/ulogd_LOGEMU.so" +#plugin="/usr/lib64/ulogd/ulogd_OPRINT.so" +#plugin="/usr/lib64/ulogd/ulogd_MYSQL.so" +#plugin="/usr/lib64/ulogd/ulogd_PGSQL.so" +#plugin="/usr/lib64/ulogd/ulogd_SQLITE3.so" +#plugin="/usr/lib64/ulogd/ulogd_PCAP.so" + + +[LOGEMU] +#file="/var/log/ulogd.syslogemu" +file="/var/log/fw/iptables.log" +sync=1 + +[OPRINT] +#file="/var/log/ulogd.pktlog" +file="/var/log/fw/ulogd.pktlog" + +[MYSQL] +table="ulog" +pass="changeme" +user="laforge" +db="ulogd" +host="localhost" + +[PGSQL] +table="ulog" +schema="public" +pass="changeme" +user="postgres" +db="ulogd" +host="localhost" + +[SQLITE3] +table="ulog" +db="/path/to/sqlite/db" +buffer=200 + +[PCAP] +file="/var/log/ulogd.pcap" +sync=1 + diff --git a/config-archive/etc/ulogd.conf.dist b/config-archive/etc/ulogd.conf.dist index e9bed91e..b9e0a982 100644 --- a/config-archive/etc/ulogd.conf.dist +++ b/config-archive/etc/ulogd.conf.dist @@ -197,7 +197,7 @@ sync=1 [pcap1] #default file is /var/log/ulogd/ulogd.pcap -#file=/var/log/ulogd/ulogd.pcap +#file="/var/log/ulogd/ulogd.pcap" sync=1 [mysql1] @@ -207,6 +207,13 @@ user="nupik" table="ulog" pass="changeme" procedure="INSERT_PACKET_FULL" +# backlog configuration: +# set backlog_memcap to the size of memory that will be +# allocated to store events in memory if data is temporary down +# and insert them when the database came back. +#backlog_memcap=1000000 +# number of events to insert at once when backlog is not empty +#backlog_oneshot_requests=10 [mysql2] db="nulog" @@ -224,6 +231,18 @@ table="ulog" #schema="public" pass="changeme" procedure="INSERT_PACKET_FULL" +# connstring can be used to define PostgreSQL connection string which +# contains all parameters of the connection. If set, this value has +# precedence on other variables used to build the connection string. +# See http://www.postgresql.org/docs/9.2/static/libpq-connect.html#LIBPQ-CONNSTRING +# for a complete description of options. +#connstring="host=localhost port=4321 dbname=nulog user=nupik password=changeme" +#backlog_memcap=1000000 +#backlog_oneshot_requests=10 +# If superior to 1 a thread dedicated to SQL request execution +# is created. The value stores the number of SQL request to keep +# in the ring buffer +#ring_buffer_size=1000 [pgsql2] db="nulog" diff --git a/config-archive/usr/share/config/kdm/kdmrc b/config-archive/usr/share/config/kdm/kdmrc index a9ed17f8..e69fd4e7 100644 --- a/config-archive/usr/share/config/kdm/kdmrc +++ b/config-archive/usr/share/config/kdm/kdmrc @@ -1,11 +1,11 @@ [General] ConfigVersion=2.4 ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6 +DataDir=/var/lib/kdm PidFile=/var/run/kdm.pid ReserveServers=:1,:2,:3 ServerVTs=-7 StaticServers=:0 -DataDir=/var/lib/kdm [Shutdown] BootManager=None @@ -46,7 +46,6 @@ SelectedUsers= ShowUsers=NotHidden SortUsers=true StdFont=Sans Serif,10,-1,5,50,0,0,0,0,0 -# Theme=/usr/share/apps/kdm/themes/oxygen-air Theme=/usr/share/apps/kdm/themes/elarun UseBackground=true UseTheme=false diff --git a/config-archive/usr/share/config/kdm/kdmrc.1 b/config-archive/usr/share/config/kdm/kdmrc.1 index 982cfc86..a9ed17f8 100644 --- a/config-archive/usr/share/config/kdm/kdmrc.1 +++ b/config-archive/usr/share/config/kdm/kdmrc.1 @@ -46,7 +46,8 @@ SelectedUsers= ShowUsers=NotHidden SortUsers=true StdFont=Sans Serif,10,-1,5,50,0,0,0,0,0 -Theme=/usr/share/apps/kdm/themes/oxygen-air +# Theme=/usr/share/apps/kdm/themes/oxygen-air +Theme=/usr/share/apps/kdm/themes/elarun UseBackground=true UseTheme=false UserCompletion=false diff --git a/config-archive/usr/share/config/kdm/kdmrc.2 b/config-archive/usr/share/config/kdm/kdmrc.2 new file mode 100644 index 00000000..982cfc86 --- /dev/null +++ b/config-archive/usr/share/config/kdm/kdmrc.2 @@ -0,0 +1,78 @@ +[General] +ConfigVersion=2.4 +ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6 +PidFile=/var/run/kdm.pid +ReserveServers=:1,:2,:3 +ServerVTs=-7 +StaticServers=:0 +DataDir=/var/lib/kdm + +[Shutdown] +BootManager=None +HaltCmd=/sbin/halt +RebootCmd=/sbin/reboot + +[X-*-Core] +AllowNullPasswd=false +AllowRootLogin=false +AllowShutdown=Root +AutoReLogin=true +ClientLogFile=.xsession-errors-%d +Reset=/usr/share/config/kdm/Xreset +Session=/usr/share/config/kdm/Xsession +SessionsDirs=/usr/share/apps/kdm/sessions,/usr/share/xsessions +Setup=/usr/share/config/kdm/Xsetup +Startup=/usr/share/config/kdm/Xstartup + +[X-*-Greeter] +AntiAliasing=false +ColorScheme= +FaceDir=/var/lib/kdm/faces +FaceSource=PreferUser +FailFont=Sans Serif,10,-1,5,75,0,0,0,0,0 +ForgingSeed=1237407001 +GUIStyle= +GreetFont=Serif,20,-1,5,50,0,0,0,0,0 +GreetString=Willkommen zu %s auf %n +GreeterPos=50,50 +HiddenUsers=thomas +Language=de +LogoArea=Clock +LogoPixmap=/usr/share/apps/kdm/pics/kdelogo.png +MaxShowUID=65000 +MinShowUID=1000 +Preloader=/usr/bin/preloadkde +SelectedUsers= +ShowUsers=NotHidden +SortUsers=true +StdFont=Sans Serif,10,-1,5,50,0,0,0,0,0 +Theme=/usr/share/apps/kdm/themes/oxygen-air +UseBackground=true +UseTheme=false +UserCompletion=false +UserList=true + +[X-:*-Core] +AllowNullPasswd=true +AllowShutdown=All +NoPassEnable=false +NoPassUsers= +ServerArgsLocal=-nolisten tcp +ServerCmd=/usr/bin/X -br -novtswitch -quiet + +[X-:*-Greeter] +AllowClose=false +DefaultUser=doris +FocusPasswd=true +LoginMode=DefaultLocal +PreselectUser=Previous + +[X-:0-Core] +AutoLoginEnable=false +AutoLoginLocked=false +AutoLoginUser= +ClientLogFile=.xsession-errors + +[Xdmcp] +Enable=false +Willing=/usr/share/config/kdm/Xwilling diff --git a/config-archive/usr/share/config/kdm/kdmrc.dist.new b/config-archive/usr/share/config/kdm/kdmrc.dist.new index 4299e174..258a06cb 100644 --- a/config-archive/usr/share/config/kdm/kdmrc.dist.new +++ b/config-archive/usr/share/config/kdm/kdmrc.dist.new @@ -449,7 +449,7 @@ FaceDir=/var/lib/kdm/faces # Random seed for forging saved session types, etc. of unknown users. # This value should be random but constant across the login domain. # Default is 0 -ForgingSeed=1376268632 +ForgingSeed=1418469430 # Specify conversation plugins for the login dialog. Each plugin can be # specified as a base name (which expands to $kde_modulesdir/kgreet_$base) # or as a full pathname. diff --git a/courier-imap/imapd b/courier-imap/imapd index 8f8a010d..7c20c456 100644 --- a/courier-imap/imapd +++ b/courier-imap/imapd @@ -1,4 +1,4 @@ -##VERSION: $Id: imapd.dist.in,v 1.41 2008/06/21 16:01:23 mrsam Exp $ +##VERSION: $Id: 2013-08-19 16:39:41 -0400 9c45d9ad13fdf439d44d7443ae75da15ea0223ed$ # # imapd created from imapd.dist by sysconftool # @@ -340,6 +340,24 @@ IMAP_EMPTYTRASH=Trash:7 IMAP_MOVE_EXPUNGE_TO_TRASH=0 +##NAME: IMAP_LOG_DELETIONS:0 +# +# +# Set IMAP_LOG_DELETIONS to log all message deletions to syslog. +# +# IMAP_LOG_DELETIONS=1 + +##NAME: IMAPDEBUGFILE:0 +# +# IMAPDEBUGFILE="imaplog.dat" +# +# Generate diagnostic logging of IMAP commands. +# +# Set this globally, restart the server. Touch this file in an account's +# maildir directory, and Courier-IMAP will append all IMAP commands received +# for new sessions for this account. NOTE: existing IMAP sessions are not +# affected, only new IMAP logins. + ##NAME: OUTBOX:0 # @@ -388,6 +406,30 @@ SENDMAIL=/usr/sbin/sendmail HEADERFROM=X-IMAP-Sender +##NAME: ID_FIELDS:0 +# +# Have the server be polite, and identify its version to the client. The client +# must be logged in before the server will identify itself. Additionally, +# the client will mutually supply its own software version, and the server will +# log it. +# +# Although the server's banner message identifies itself, in free-form manner, +# this the ID IMAP extension, for clients to log. +# +# IMAP_ID_FIELDS is the sum of the following values: +# +# 1 - identify the version of the IMAP server +# 2 - identify the operating system (if available) +# 4 - identify the operating system release (if available) +# +# A value of 0 identifies the server software only. +# +# Uncomment this setting to enable the IMAP ID extension. One reason you might +# want to enable it is to log the clients' software version. Enabling this +# setting will mutually log the client's software, in the system logs. +# +# IMAP_ID_FIELDS=0 + ##NAME: OUTBOX_MULTIPLE_SEND:0 # # Remove the following comment to allow a COPY of more than one message to diff --git a/courier-imap/imapd-ssl b/courier-imap/imapd-ssl index be0fb3ff..0811b739 100644 --- a/courier-imap/imapd-ssl +++ b/courier-imap/imapd-ssl @@ -1,11 +1,11 @@ -##VERSION: $Id: imapd-ssl.dist.in,v 1.22 2009/08/12 22:25:49 mrsam Exp $ +##VERSION: $Id: 2013-10-14 22:07:39 -0400 37a74ee0f736237b67330c620de7dc08232dec17$ # # imapd-ssl created from imapd-ssl.dist by sysconftool # # Do not alter lines that begin with ##, they are used when upgrading # this configuration. # -# Copyright 2000 - 2008 Double Precision, Inc. See COPYING for +# Copyright 2000 - 2013 Double Precision, Inc. See COPYING for # distribution information. # # This configuration file sets various options for the Courier-IMAP server @@ -104,40 +104,29 @@ IMAP_TLS_REQUIRED=0 COURIERTLS=/usr/sbin/couriertls +##NAME: TLS_PRIORITY:0 +# +# GnuTLS setting only +# +# Set TLS protocol priority settings (GnuTLS only) +# +# DEFAULT: NORMAL:-CTYPE-OPENPGP +# +# TLS_PRIORITY="NORMAL:-CTYPE-OPENPGP" + ##NAME: TLS_PROTOCOL:0 # # TLS_PROTOCOL sets the protocol version. The possible versions are: # # OpenSSL: # -# SSL2 - SSLv2 # SSL3 - SSLv3 -# SSL23 - either SSLv2 or SSLv3 (also TLS1, it seems) +# SSL23 - all protocols (including TLS 1.x protocols) # TLS1 - TLS1 +# TLSv1.1 - TLS1.1 +# TLSv1.2 - TLS1.2 # -# Note that this setting, with OpenSSL, is modified by the TLS_CIPHER_LIST -# setting, below. -# -# GnuTLS: -# -# SSL3 - SSLv3 -# TLS1 - TLS 1.0 -# TLS1_1 - TLS 1.1 -# -# When compiled against GnuTLS, multiple protocols can be selected as follows: -# -# TLS_PROTOCOL="TLS1_1:TLS1:SSL3" -# -# DEFAULT VALUES: -# -# SSL23 (OpenSSL), or "TLS_1:TLS1:SSL3" (GnuTLS) - -##NAME: TLS_STARTTLS_PROTOCOL:0 -# -# TLS_STARTTLS_PROTOCOL is used instead of TLS_PROTOCOL for the IMAP STARTTLS -# extension, as opposed to IMAP over SSL on port 993. -# -# It takes the same values for OpenSSL/GnuTLS as TLS_PROTOCOL +# Leave it unset to use any protocol except SSL 2. ##NAME: TLS_CIPHER_LIST:0 # @@ -147,10 +136,7 @@ COURIERTLS=/usr/sbin/couriertls # # OpenSSL: # -# TLS_CIPHER_LIST="SSLv3:TLSv1:!SSLv2:HIGH:!LOW:!MEDIUM:!EXP:!NULL:!aNULL@STRENGTH" -# -# To enable SSL2, remove the obvious "!SSLv2" part from the above list. -# +# TLS_CIPHER_LIST="SSLv3:TLSv1:HIGH:!LOW:!MEDIUM:!EXP:!NULL:!aNULL@STRENGTH" # # GnuTLS: # @@ -168,66 +154,46 @@ COURIERTLS=/usr/sbin/couriertls # LOW -- all ciphers that use fewer than a 128 bit key size, the NULL cipher # is not included # ALL -- all ciphers except the NULL cipher - -##NAME: TLS_MIN_DH_BITS:0 -# -# TLS_MIN_DH_BITS=n # -# GnuTLS only: -# -# Set the minimum number of acceptable bits for a DH key exchange. -# -# GnuTLS's compiled-in default is 727 bits (as of GnuTLS 1.6.3). Some server -# have been encountered that offer 512 bit keys. You may have to set -# TLS_MIN_DH_BITS=512 here, if necessary. +# See GnuTLS documentation, gnutls_priority_init(3) for additional +# documentation. -##NAME: TLS_KX_LIST:0 +##NAME: TLS_STARTTLS_PROTOCOL:0 +# +# TLS_STARTTLS_PROTOCOL is used instead of TLS_PROTOCOL for the IMAP STARTTLS +# extension, as opposed to IMAP over SSL on port 993. # -# GnuTLS only: +# It takes the same values for OpenSSL as TLS_PROTOCOL + +##NAME: TLS_CIPHER_LIST:0 # -# Allowed key exchange protocols. The default of "ALL" should be sufficient. -# The list of supported key exchange protocols depends on the options GnuTLS -# was compiled against, but may include the following: +# TLS_CIPHER_LIST optionally sets the list of ciphers to be used by the +# OpenSSL library. In most situations you can leave TLS_CIPHER_LIST +# undefined # -# DHERSA, DHEDSS, RSA, SRP, SRPRSA, SRPDSS, PSK, DHEPSK, ANONDH, RSAEXPORT - -TLS_KX_LIST=ALL - -##NAME: TLS_COMPRESSION:0 +# OpenSSL: # -# GnuTLS only: +# TLS_CIPHER_LIST="SSLv3:TLSv1:HIGH:!LOW:!MEDIUM:!EXP:!NULL:!aNULL@STRENGTH" # -# Optional compression. "ALL" selects all available compression methods. # -# Available compression methods: DEFLATE, LZO, NULL - -TLS_COMPRESSION=ALL -##NAME: TLS_CERTS:0 +##NAME: TLS_MIN_DH_BITS:0 +# +# TLS_MIN_DH_BITS=n # # GnuTLS only: # -# Supported certificate types are X509 and OPENPGP. +# Set the minimum number of acceptable bits for a DH key exchange. # -# OPENPGP has not been tested - -TLS_CERTS=X509 +# GnuTLS's compiled-in default is 727 bits (as of GnuTLS 1.6.3). Some server +# have been encountered that offer 512 bit keys. You may have to set +# TLS_MIN_DH_BITS=512 here, if necessary. ##NAME: TLS_TIMEOUT:0 # TLS_TIMEOUT is currently not implemented, and reserved for future use. # This is supposed to be an inactivity timeout, but its not yet implemented. # -##NAME: TLS_DHCERTFILE:0 -# -# TLS_DHCERTFILE - PEM file that stores a Diffie-Hellman -based certificate. -# When OpenSSL is compiled to use Diffie-Hellman ciphers instead of RSA -# you must generate a DH pair that will be used. In most situations the -# DH pair is to be treated as confidential, and the file specified by -# TLS_DHCERTFILE must not be world-readable. -# -# TLS_DHCERTFILE= - ##NAME: TLS_CERTFILE:0 # # TLS_CERTFILE - certificate to use. TLS_CERTFILE is required for SSL/TLS @@ -262,6 +228,12 @@ TLS_CERTS=X509 TLS_CERTFILE=/etc/courier-imap/imapd.pem +##NAME: TLS_DHPARAMS:0 +# +# TLS_DHPARAMS - DH parameter file. +# +TLS_DHPARAMS=/usr/share/dhparams.pem + ##NAME: TLS_TRUSTCERTS:0 # # TLS_TRUSTCERTS=pathname - load trusted certificates from pathname. @@ -290,7 +262,6 @@ TLS_TRUSTCERTS=/etc/ssl/certs # TLS_VERIFYPEER=NONE - ##NAME: TLS_EXTERNAL:0 # # To enable SSL certificate-based authentication: diff --git a/courier-imap/imapd.cnf b/courier-imap/imapd.cnf index c7c1f616..ed03134e 100644 --- a/courier-imap/imapd.cnf +++ b/courier-imap/imapd.cnf @@ -2,11 +2,12 @@ RANDFILE = /usr/share/imapd.rand [ req ] -default_bits = 1024 +default_bits = 4096 encrypt_key = yes distinguished_name = req_dn x509_extensions = cert_type prompt = no +default_md = sha1 [ req_dn ] C=US diff --git a/courier-imap/pop3d b/courier-imap/pop3d index 8dd8bd1f..908c5c58 100644 --- a/courier-imap/pop3d +++ b/courier-imap/pop3d @@ -1,11 +1,11 @@ -##VERSION: $Id: pop3d.dist.in,v 1.16 2005/07/05 12:42:51 mrsam Exp $ +##VERSION: $Id: 2013-08-19 16:39:41 -0400 9c45d9ad13fdf439d44d7443ae75da15ea0223ed$ # # pop3d created from pop3d.dist by sysconftool # # Do not alter lines that begin with ##, they are used when upgrading # this configuration. # -# Copyright 1998 - 2004 Double Precision, Inc. See COPYING for +# Copyright 1998 - 2011 Double Precision, Inc. See COPYING for # distribution information. # # Courier POP3 daemon configuration @@ -95,6 +95,15 @@ PORT=110 ADDRESS=0 +##NAME: AUTHSERVICE:0 +# +# It's possible to authenticate using a different 'service' parameter +# depending on the connection's port. This only works with authentication +# modules that use the 'service' parameter, such as PAM. Example: +# +# AUTHSERVICE110=pop3 +# AUTHSERVICE995=pop3s + ##NAME: TCPDOPTS:0 # # Other couriertcpd(1) options. The following defaults should be fine. @@ -139,6 +148,14 @@ LOGGEROPTS="-name=pop3d" POP3DSTART=NO +##NAME: POP3_LOG_DELETIONS:0 +# +# +# Set POP3_LOG_DELETIONS to log all message deletions to syslog. +# +# POP3_LOG_DELETIONS=1 + + ##NAME: MAILDIRPATH:0 # # MAILDIRPATH - directory name of the maildir directory. diff --git a/courier-imap/pop3d-ssl b/courier-imap/pop3d-ssl index 472fa527..8597a05c 100644 --- a/courier-imap/pop3d-ssl +++ b/courier-imap/pop3d-ssl @@ -1,11 +1,11 @@ -##VERSION: $Id: pop3d-ssl.dist.in,v 1.23 2009/08/12 22:25:49 mrsam Exp $ +##VERSION: $Id: 2013-10-14 22:07:39 -0400 37a74ee0f736237b67330c620de7dc08232dec17$ # # pop3d-ssl created from pop3d-ssl.dist by sysconftool # # Do not alter lines that begin with ##, they are used when upgrading # this configuration. # -# Copyright 2000-2008 Double Precision, Inc. See COPYING for +# Copyright 2000-2013 Double Precision, Inc. See COPYING for # distribution information. # # This configuration file sets various options for the Courier-IMAP server @@ -89,42 +89,27 @@ POP3_TLS_REQUIRED=0 COURIERTLS=/usr/sbin/couriertls +##NAME: TLS_PRIORITY:0 +# +# Set TLS protocol priority settings (GnuTLS only) +# +# DEFAULT: NORMAL:-CTYPE-OPENPGP +# +# TLS_PRIORITY="NORMAL:-CTYPE-OPENPGP" + ##NAME: TLS_PROTOCOL:0 # # TLS_PROTOCOL sets the protocol version. The possible versions are: # # OpenSSL: # -# SSL2 - SSLv2 # SSL3 - SSLv3 -# SSL23 - either SSLv2 or SSLv3 (also TLS1, it seems) +# SSL23 - all protocols (including TLS 1.x protocols) # TLS1 - TLS1 +# TLSv1.1 - TLS1.1 +# TLSv1.2 - TLS1.2 # -# Note that this setting, with OpenSSL, is modified by the TLS_CIPHER_LIST -# setting, below. -# -# GnuTLS: -# -# SSL3 - SSLv3 -# TLS1 - TLS 1.0 -# TLS1_1 - TLS 1.1 -# -# When compiled against GnuTLS, multiple protocols can be selected as follows: -# -# TLS_PROTOCOL="TLS1_1:TLS1:SSL3" -# -# DEFAULT VALUES: -# -# SSL23 (OpenSSL), or "TLS_1:TLS1:SSL3" (GnuTLS) - -##NAME: TLS_STARTTLS_PROTOCOL:0 -# -# TLS_STARTTLS_PROTOCOL is used instead of TLS_PROTOCOL for the POP3 STARTTLS -# extension, as opposed to POP3 over SSL on port 995. -# -# It takes the same values for OpenSSL/GnuTLS as TLS_PROTOCOL - -TLS_STARTTLS_PROTOCOL=TLS1 +# Leave it unset to use any protocol except SSL 2. ##NAME: TLS_CIPHER_LIST:0 # @@ -134,10 +119,7 @@ TLS_STARTTLS_PROTOCOL=TLS1 # # OpenSSL: # -# TLS_CIPHER_LIST="SSLv3:TLSv1:!SSLv2:HIGH:!LOW:!MEDIUM:!EXP:!NULL:!aNULL@STRENGTH" -# -# To enable SSL2, remove the obvious "!SSLv2" part from the above list. -# +# TLS_CIPHER_LIST="SSLv3:TLSv1:HIGH:!LOW:!MEDIUM:!EXP:!NULL:!aNULL@STRENGTH" # # GnuTLS: # @@ -155,7 +137,9 @@ TLS_STARTTLS_PROTOCOL=TLS1 # LOW -- all ciphers that use fewer than a 128 bit key size, the NULL cipher # is not included # ALL -- all ciphers except the NULL cipher - +# +# See GnuTLS documentation, gnutls_priority_init(3) for additional +# documentation. ##NAME: TLS_MIN_DH_BITS:0 # @@ -169,53 +153,11 @@ TLS_STARTTLS_PROTOCOL=TLS1 # have been encountered that offer 512 bit keys. You may have to set # TLS_MIN_DH_BITS=512 here, if necessary. -##NAME: TLS_KX_LIST:0 -# -# GnuTLS only: -# -# Allowed key exchange protocols. The default of "ALL" should be sufficient. -# The list of supported key exchange protocols depends on the options GnuTLS -# was compiled against, but may include the following: -# -# DHERSA, DHEDSS, RSA, SRP, SRPRSA, SRPDSS, PSK, DHEPSK, ANONDH, RSAEXPORT - -TLS_KX_LIST=ALL - -##NAME: TLS_COMPRESSION:0 -# -# GnuTLS only: -# -# Optional compression. "ALL" selects all available compression methods. -# -# Available compression methods: DEFLATE, LZO, NULL - -TLS_COMPRESSION=ALL - -##NAME: TLS_CERTS:0 -# -# GnuTLS only: -# -# Supported certificate types are X509 and OPENPGP. -# -# OPENPGP has not been tested - -TLS_CERTS=X509 - ##NAME: TLS_TIMEOUT:0 # TLS_TIMEOUT is currently not implemented, and reserved for future use. # This is supposed to be an inactivity timeout, but its not yet implemented. # -##NAME: TLS_DHCERTFILE:0 -# -# TLS_DHCERTFILE - PEM file that stores a Diffie-Hellman -based certificate. -# When OpenSSL is compiled to use Diffie-Hellman ciphers instead of RSA -# you must generate a DH pair that will be used. In most situations the -# DH pair is to be treated as confidential, and the file specified by -# TLS_DHCERTFILE must not be world-readable. -# -# TLS_DHCERTFILE= - ##NAME: TLS_CERTFILE:0 # # TLS_CERTFILE - certificate to use. TLS_CERTFILE is required for SSL/TLS @@ -250,6 +192,12 @@ TLS_CERTS=X509 TLS_CERTFILE=/etc/courier-imap/pop3d.pem +##NAME: TLS_DHPARAMS:0 +# +# TLS_DHPARAMS - DH parameter file. +# +TLS_DHPARAMS=/usr/share/dhparams.pem + ##NAME: TLS_TRUSTCERTS:0 # # TLS_TRUSTCERTS=pathname - load trusted certificates from pathname. diff --git a/courier-imap/pop3d.cnf b/courier-imap/pop3d.cnf index f5ee623e..a792cb98 100644 --- a/courier-imap/pop3d.cnf +++ b/courier-imap/pop3d.cnf @@ -2,11 +2,12 @@ RANDFILE = /usr/share/pop3d.rand [ req ] -default_bits = 1024 +default_bits = 4096 encrypt_key = yes distinguished_name = req_dn x509_extensions = cert_type prompt = no +default_md = sha1 [ req_dn ] C=US diff --git a/cron.weekly/mdadm b/cron.weekly/mdadm new file mode 100644 index 00000000..72e401d5 --- /dev/null +++ b/cron.weekly/mdadm @@ -0,0 +1,4 @@ +#!/bin/sh +if [ -x /usr/sbin/checkarray ] && [ $(date +\%d) -le 7 ]; then + /usr/sbin/checkarray --cron --all --idle --quiet +fi diff --git a/csh.env b/csh.env index 4924e4ff..2ad6657f 100644 --- a/csh.env +++ b/csh.env @@ -4,15 +4,16 @@ setenv ANT_HOME '/usr/share/ant' setenv CONFIG_PROTECT '/var/bind /usr/share/gnupg/qualified.txt /var/lib/hsqldb /usr/share/config' -setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/ /etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild' +setenv CONFIG_PROTECT_MASK '/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild' setenv CVS_RSH 'ssh' setenv EDITOR '/usr/bin/vim' +setenv ES_BASHCOMP_DIRS '/usr/share/bash-completion/completions' setenv FLTK_DOCDIR '/usr/share/doc/fltk-1.3.2/html' setenv GCC_SPECS '' setenv GSETTINGS_BACKEND 'dconf' setenv GUILE_LOAD_PATH '/usr/share/guile/1.8' setenv HG '/usr/bin/hg' -setenv INFOPATH '/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.2/info' +setenv INFOPATH '/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/info' setenv JAVACC_HOME '/usr/share/javacc/' setenv LANG 'de_DE.UTF-8' setenv LC_ADDRESS 'de_DE.utf8' @@ -30,17 +31,17 @@ setenv LC_TIME 'de_DE.utf8' setenv LESS '-R -M --shift 5' setenv LESSOPEN '|lesspipe %s' setenv LIBBLURAY_CP '/usr/share/libbluray/lib/libbluray.jar' -setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.2/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.5/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.3/man/' +setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.5/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.3/man/' setenv MULTIOSDIRS '../lib64:../lib32' setenv OPENGL_PROFILE 'xorg-x11' setenv PAGER '/usr/bin/less' -setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3:/usr/lib64/subversion/bin:/usr/games/bin' -setenv PRELINK_PATH_MASK '/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so:/opt/bin/skype' +setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.3:/usr/lib64/subversion/bin:/usr/games/bin' +setenv PRELINK_PATH_MASK '/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so:/usr/bin/evolution:/opt/bin/skype' setenv PYTHONDOCS_2_7 '/usr/share/doc/python-docs-2.7.3/html/library' setenv PYTHONDOCS_3_3 '/usr/share/doc/python-docs-3.3.2/html/library' setenv QT_GRAPHICSSYSTEM 'raster' setenv QT_PLUGIN_PATH '/usr/lib64/kde4/plugins' -setenv ROOTPATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3:/usr/lib64/subversion/bin' +setenv ROOTPATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.3:/usr/lib64/subversion/bin' setenv RUBYOPT '-rauto_gem' setenv R_HOME '/usr/lib64/R' setenv VBOX_APP_HOME '/usr/lib64/virtualbox' diff --git a/cups/printers.conf b/cups/printers.conf index 1ad5dd76..4f0b6172 100644 --- a/cups/printers.conf +++ b/cups/printers.conf @@ -1,11 +1,10 @@ -# Printer configuration file for CUPS v1.7.1 -# Written by cupsd on 2014-11-02 09:14 +# Printer configuration file for CUPS v1.7.5 +# Written by cupsd on 2014-11-26 07:04 # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING UUID urn:uuid:37ccb9f9-f39f-3442-414c-7de19e42748d Info blubber blub Location hier -MakeModel Kyocera FS-1020D - CUPS+Gutenprint v5.2.9 DeviceURI lpd://10.12.11.32/lp State Idle StateTime 1388061630 @@ -23,7 +22,6 @@ ErrorPolicy stop-printer UUID urn:uuid:539ead49-b7d1-3af8-69d7-7f753e43178a Info Kyocera FS-1020D Location Arbeitszimmer -MakeModel Kyocera FS-1020D - CUPS+Gutenprint v5.2.9 DeviceURI usb://Kyocera/FS-1020D?serial=XAX5991704 State Idle StateTime 1388067872 @@ -41,7 +39,6 @@ ErrorPolicy stop-printer UUID urn:uuid:7ae9b14e-20ad-3628-427d-870cdf4cdea4 Info PDF Printer Location Local Printer -MakeModel Apple LaserWriter 4/600 Foomatic/Postscript (recommended) DeviceURI cups-pdf:/ State Idle StateTime 1264666962 diff --git a/dbus-1/session.conf b/dbus-1/session.conf index 66d46b8b..5d93be71 100644 --- a/dbus-1/session.conf +++ b/dbus-1/session.conf @@ -49,9 +49,11 @@ 1000000000 250000000 1000000000 - 1024 + 120000 240000 + 150000 100000 10000 100000 diff --git a/dbus-1/system.d/org.freedesktop.GeoClue2.Agent.conf b/dbus-1/system.d/org.freedesktop.GeoClue2.Agent.conf new file mode 100644 index 00000000..b9824dc8 --- /dev/null +++ b/dbus-1/system.d/org.freedesktop.GeoClue2.Agent.conf @@ -0,0 +1,11 @@ + + + + + + + diff --git a/dbus-1/system.d/org.freedesktop.GeoClue2.conf b/dbus-1/system.d/org.freedesktop.GeoClue2.conf index ccb9b6c9..070fecf1 100644 --- a/dbus-1/system.d/org.freedesktop.GeoClue2.conf +++ b/dbus-1/system.d/org.freedesktop.GeoClue2.conf @@ -11,5 +11,20 @@ + + + + + + + + + diff --git a/dbus-1/system.d/org.freedesktop.NetworkManager.conf b/dbus-1/system.d/org.freedesktop.NetworkManager.conf index 5e7bafa1..db68374c 100644 --- a/dbus-1/system.d/org.freedesktop.NetworkManager.conf +++ b/dbus-1/system.d/org.freedesktop.NetworkManager.conf @@ -24,6 +24,7 @@ + diff --git a/dbus-1/system.d/org.freedesktop.UPower.conf b/dbus-1/system.d/org.freedesktop.UPower.conf index fc2b604a..5a6c660b 100644 --- a/dbus-1/system.d/org.freedesktop.UPower.conf +++ b/dbus-1/system.d/org.freedesktop.UPower.conf @@ -19,8 +19,6 @@ send_interface="org.freedesktop.DBus.Properties"/> - - + + @@ -48,6 +52,14 @@ send_interface="org.freedesktop.machine1.Manager" send_member="GetMachineByPID"/> + + + + diff --git a/dbus-1/system.d/org.freedesktop.systemd1.conf b/dbus-1/system.d/org.freedesktop.systemd1.conf index a375dce0..9dfca81c 100644 --- a/dbus-1/system.d/org.freedesktop.systemd1.conf +++ b/dbus-1/system.d/org.freedesktop.systemd1.conf @@ -62,6 +62,10 @@ send_interface="org.freedesktop.systemd1.Manager" send_member="ListUnits"/> + + diff --git a/dbus-1/system.d/org.kde.baloo.filewatch.conf b/dbus-1/system.d/org.kde.baloo.filewatch.conf new file mode 100644 index 00000000..090a3ead --- /dev/null +++ b/dbus-1/system.d/org.kde.baloo.filewatch.conf @@ -0,0 +1,11 @@ + + + + + + + + + diff --git a/dbus-1/system.d/org.qt.policykit.examples.conf b/dbus-1/system.d/org.qt.policykit.examples.conf new file mode 100644 index 00000000..304d269f --- /dev/null +++ b/dbus-1/system.d/org.qt.policykit.examples.conf @@ -0,0 +1,20 @@ + + + + + + + + + + + + + + + + + diff --git a/dconf/db/gdm.d/00-upstream-settings b/dconf/db/gdm.d/00-upstream-settings deleted file mode 100644 index 24a7715e..00000000 --- a/dconf/db/gdm.d/00-upstream-settings +++ /dev/null @@ -1,57 +0,0 @@ -# This file is part of the GDM packaging and should not be changed. -# -# Instead create your own file next to it with a higher numbered prefix, -# and run -# -# dconf update -# - -[org/gnome/desktop/a11y/keyboard] -enable=true - -[org/gnome/desktop/background] -show-desktop-icons=false - -[org/gnome/desktop/default-applications/terminal] -exec='/bin/true' - -[org/gnome/desktop/interface] -toolkit-accessibility=true - -[org/gnome/desktop/lockdown] -disable-application-handlers=true -disable-command-line=true -disable-lock-screen=true -disable-log-out=false -disable-printing=true -disable-print-setup=true -disable-save-to-disk=true -disable-user-switching=true - -[org/gnome/desktop/session] -session-name='gdm-shell' - -[org/gnome/desktop/sound] -event-sounds=true - -[org/gnome/settings-daemon/plugins] -whitelisted-plugins=['a11y-keyboard', 'a11y-settings', 'background', 'clipboard', 'color', 'cursor', 'keyboard', 'media-keys', 'orientation', 'power', 'smartcard', 'sound', 'xrandr', 'xsettings'] - -[org/gnome/settings-daemon/plugins/media-keys] -calculator='' -eject='' -email='' -help='' -home='' -media='' -next='' -pause='' -play='' -previous='' -screensaver='' -search='' -stop='' -www='' - -[org/gnome/settings-daemon/peripherals/input-devices] -hotplug-command='' diff --git a/dconf/db/gdm.d/locks/00-upstream-settings-locks b/dconf/db/gdm.d/locks/00-upstream-settings-locks deleted file mode 100644 index 830a729c..00000000 --- a/dconf/db/gdm.d/locks/00-upstream-settings-locks +++ /dev/null @@ -1,30 +0,0 @@ -/org/gnome/desktop/a11y/keyboard/enable -/org/gnome/desktop/background/show-desktop-icons -/org/gnome/desktop/default-applications/terminal/exec -/org/gnome/desktop/interface/toolkit-accessibility -/org/gnome/desktop/lockdown/disable-application-handlers -/org/gnome/desktop/lockdown/disable-command-line -/org/gnome/desktop/lockdown/disable-lock-screen -/org/gnome/desktop/lockdown/disable-log-out -/org/gnome/desktop/lockdown/disable-printing -/org/gnome/desktop/lockdown/disable-print-setup -/org/gnome/desktop/lockdown/disable-save-to-disk -/org/gnome/desktop/lockdown/disable-user-switching -/org/gnome/desktop/session/session-name -/org/gnome/desktop/sound/event-sounds -/org/gnome/settings-daemon/plugins/whitelisted-plugins -/org/gnome/settings-daemon/plugins/media-keys/calculator -/org/gnome/settings-daemon/plugins/media-keys/eject -/org/gnome/settings-daemon/plugins/media-keys/email -/org/gnome/settings-daemon/plugins/media-keys/help -/org/gnome/settings-daemon/plugins/media-keys/home -/org/gnome/settings-daemon/plugins/media-keys/media -/org/gnome/settings-daemon/plugins/media-keys/next -/org/gnome/settings-daemon/plugins/media-keys/pause -/org/gnome/settings-daemon/plugins/media-keys/play -/org/gnome/settings-daemon/plugins/media-keys/previous -/org/gnome/settings-daemon/plugins/media-keys/screensaver -/org/gnome/settings-daemon/plugins/media-keys/search -/org/gnome/settings-daemon/plugins/media-keys/stop -/org/gnome/settings-daemon/plugins/media-keys/www -/org/gnome/settings-daemon/peripherals/input-devices/hotplug-command diff --git a/dconf/profile/gdm b/dconf/profile/gdm deleted file mode 100644 index e4ac2200..00000000 --- a/dconf/profile/gdm +++ /dev/null @@ -1,2 +0,0 @@ -user-db:user -system-db:gdm diff --git a/default/grub b/default/grub index 321487b3..c4b11376 100644 --- a/default/grub +++ b/default/grub @@ -1,23 +1,34 @@ -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-2,v 1.4 2013/09/21 18:10:55 floppym Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-3,v 1.4 2014/10/16 04:04:02 floppym Exp $ # # To populate all changes in this file you need to regenerate your # grub configuration file afterwards: # 'grub2-mkconfig -o /boot/grub/grub.cfg' # # See the grub info page for documentation on possible variables and -# their associated values. +# their associated values. GRUB_DISTRIBUTOR="Bruni (Gentoo)" +# Default menu entry GRUB_DEFAULT=0 -GRUB_HIDDEN_TIMEOUT=5 -GRUB_HIDDEN_TIMEOUT_QUIET=true + +# Boot the default entry this many seconds after the menu is displayed +#GRUB_TIMEOUT=5 GRUB_TIMEOUT=10 +#GRUB_TIMEOUT_STYLE=menu # Append parameters to the linux kernel command line -# GRUB_CMDLINE_LINUX="" +#GRUB_CMDLINE_LINUX="" +# +# Examples: +# +# Boot with network interface renaming disabled +# GRUB_CMDLINE_LINUX="net.ifnames=0" +# +# Boot with systemd instead of sysvinit (openrc) +# GRUB_CMDLINE_LINUX="init=/usr/lib/systemd/systemd" # Append parameters to the linux kernel command line for non-recovery entries #GRUB_CMDLINE_LINUX_DEFAULT="" @@ -31,6 +42,13 @@ GRUB_TIMEOUT=10 #GRUB_GFXMODE=640x480 GRUB_GFXMODE=800x600 +# Set to 'text' to force the Linux kernel to boot in normal text +# mode, 'keep' to preserve the graphics mode set using +# 'GRUB_GFXMODE', 'WIDTHxHEIGHT'['xDEPTH'] to set a particular +# graphics mode, or a sequence of these separated by commas or +# semicolons to try several modes in sequence. +#GRUB_GFXPAYLOAD_LINUX= + # Path to theme spec txt file. # The starfield is by default provided with use truetype. # NOTE: when enabling custom theme, ensure you have required font/etc. diff --git a/dhcpcd.conf b/dhcpcd.conf index 96eaf523..e905b344 100644 --- a/dhcpcd.conf +++ b/dhcpcd.conf @@ -1,6 +1,9 @@ # A sample configuration for dhcpcd. # See dhcpcd.conf(5) for details. +# Allow users of this group to interact with dhcpcd via the control socket. +#controlgroup wheel + # Inform the DHCP server of our hostname for DDNS. hostname @@ -30,6 +33,9 @@ option ntp_servers # A ServerID is required by RFC2131. require dhcp_server_identifier +# Generate Stable Private IPv6 Addresses instead of hardware based ones +slaac private + # A hook script is provided to lookup the hostname if not set by the DHCP # server, but it should not be run by default. nohook lookup-hostname diff --git a/eixrc/00-eixrc b/eixrc/00-eixrc index be2cdea0..8e638139 100644 --- a/eixrc/00-eixrc +++ b/eixrc/00-eixrc @@ -1,4 +1,4 @@ -# /etc/eixrc/00-eirc +# /etc/eixrc/00-eixrc # # All non-hidden files in /etc/eixrc # (or a subdirectory thereof) are read in alphabetical order. diff --git a/env.d/04gcc-x86_64-pc-linux-gnu b/env.d/04gcc-x86_64-pc-linux-gnu index eb3094fe..36b9270a 100644 --- a/env.d/04gcc-x86_64-pc-linux-gnu +++ b/env.d/04gcc-x86_64-pc-linux-gnu @@ -1,6 +1,6 @@ -PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3" -ROOTPATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3" +PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.3" +ROOTPATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.3" GCC_SPECS="" -MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/man" -INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/info" +MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.3/man" +INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.3/info" MULTIOSDIRS="../lib64:../lib32" diff --git a/env.d/05binutils b/env.d/05binutils index 7b6cfe55..6c9aa5a6 100644 --- a/env.d/05binutils +++ b/env.d/05binutils @@ -1,2 +1,2 @@ -MANPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.2/man -INFOPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.2/info +MANPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man +INFOPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/info diff --git a/env.d/20php5.3 b/env.d/20php5.3 deleted file mode 100644 index 838fa663..00000000 --- a/env.d/20php5.3 +++ /dev/null @@ -1,2 +0,0 @@ -MANPATH="/usr/lib64/php5.3/man/" -CONFIG_PROTECT_MASK="/etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/" diff --git a/env.d/50bash_completion b/env.d/50bash_completion new file mode 100644 index 00000000..ef1d881a --- /dev/null +++ b/env.d/50bash_completion @@ -0,0 +1 @@ +ES_BASHCOMP_DIRS="/usr/share/bash-completion/completions" diff --git a/env.d/90nss b/env.d/90nss deleted file mode 100644 index fbade166..00000000 --- a/env.d/90nss +++ /dev/null @@ -1 +0,0 @@ -PRELINK_PATH_MASK=/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so diff --git a/env.d/90nss-amd64 b/env.d/90nss-amd64 new file mode 100644 index 00000000..fbade166 --- /dev/null +++ b/env.d/90nss-amd64 @@ -0,0 +1 @@ +PRELINK_PATH_MASK=/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so diff --git a/env.d/99evolution b/env.d/99evolution new file mode 100644 index 00000000..d0ab6cd6 --- /dev/null +++ b/env.d/99evolution @@ -0,0 +1 @@ +PRELINK_PATH_MASK=/usr/bin/evolution diff --git a/env.d/binutils/config-x86_64-pc-linux-gnu b/env.d/binutils/config-x86_64-pc-linux-gnu index 9abf957f..77a1de26 100644 --- a/env.d/binutils/config-x86_64-pc-linux-gnu +++ b/env.d/binutils/config-x86_64-pc-linux-gnu @@ -1 +1 @@ -CURRENT=2.23.2 +CURRENT=2.24 diff --git a/env.d/binutils/x86_64-pc-linux-gnu-2.23.2 b/env.d/binutils/x86_64-pc-linux-gnu-2.23.2 deleted file mode 100644 index 6f498185..00000000 --- a/env.d/binutils/x86_64-pc-linux-gnu-2.23.2 +++ /dev/null @@ -1,4 +0,0 @@ -TARGET="x86_64-pc-linux-gnu" -VER="2.23.2" -LIBPATH="/usr/lib64/binutils/x86_64-pc-linux-gnu/2.23.2" -FAKE_TARGETS="x86_64-pc-linux-gnu" diff --git a/env.d/binutils/x86_64-pc-linux-gnu-2.24 b/env.d/binutils/x86_64-pc-linux-gnu-2.24 new file mode 100644 index 00000000..c57d3fe8 --- /dev/null +++ b/env.d/binutils/x86_64-pc-linux-gnu-2.24 @@ -0,0 +1,4 @@ +TARGET="x86_64-pc-linux-gnu" +VER="2.24" +LIBPATH="/usr/lib64/binutils/x86_64-pc-linux-gnu/2.24" +FAKE_TARGETS="x86_64-pc-linux-gnu" diff --git a/env.d/gcc/.NATIVE b/env.d/gcc/.NATIVE index d7f9d998..84d7b4fc 120000 --- a/env.d/gcc/.NATIVE +++ b/env.d/gcc/.NATIVE @@ -1 +1 @@ -x86_64-pc-linux-gnu-4.7.3 \ No newline at end of file +x86_64-pc-linux-gnu-4.8.3 \ No newline at end of file diff --git a/env.d/gcc/config-x86_64-pc-linux-gnu b/env.d/gcc/config-x86_64-pc-linux-gnu index b93dfd25..502efb9e 100644 --- a/env.d/gcc/config-x86_64-pc-linux-gnu +++ b/env.d/gcc/config-x86_64-pc-linux-gnu @@ -1 +1 @@ -CURRENT=x86_64-pc-linux-gnu-4.7.3 +CURRENT=x86_64-pc-linux-gnu-4.8.3 diff --git a/env.d/gcc/x86_64-pc-linux-gnu-4.7.3 b/env.d/gcc/x86_64-pc-linux-gnu-4.7.3 deleted file mode 100644 index 58a677b8..00000000 --- a/env.d/gcc/x86_64-pc-linux-gnu-4.7.3 +++ /dev/null @@ -1,8 +0,0 @@ -LDPATH="/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3:/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/32" -MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/man" -INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/info" -STDCXX_INCDIR="g++-v4" -CTARGET="x86_64-pc-linux-gnu" -GCC_SPECS="" -MULTIOSDIRS="../lib64:../lib32" -GCC_PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3" diff --git a/env.d/gcc/x86_64-pc-linux-gnu-4.8.3 b/env.d/gcc/x86_64-pc-linux-gnu-4.8.3 new file mode 100644 index 00000000..5727e947 --- /dev/null +++ b/env.d/gcc/x86_64-pc-linux-gnu-4.8.3 @@ -0,0 +1,8 @@ +LDPATH="/usr/lib/gcc/x86_64-pc-linux-gnu/4.8.3:/usr/lib/gcc/x86_64-pc-linux-gnu/4.8.3/32" +MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.3/man" +INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.3/info" +STDCXX_INCDIR="g++-v4" +CTARGET="x86_64-pc-linux-gnu" +GCC_SPECS="" +MULTIOSDIRS="../lib64:../lib32" +GCC_PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.3" diff --git a/eselect/postgresql/active.links b/eselect/postgresql/active.links index 350b177d..d34088b1 100644 --- a/eselect/postgresql/active.links +++ b/eselect/postgresql/active.links @@ -15,7 +15,6 @@ usr/lib64/libecpg_compat.so.3.5 usr/lib64/libecpg.so.6 usr/lib64/libecpg.so usr/lib64/libpq.so -usr/lib64/libpqwalreceiver.so usr/lib64/libpq.so.5.6 usr/lib64/libpgtypes.so usr/lib64/libecpg.so.6.5 @@ -24,13 +23,7 @@ usr/lib64/libpq.a usr/lib64/libecpg_compat.a usr/lib64/libpgcommon.a usr/lib64/libecpg_compat.so -usr/bin/pg_standby usr/bin/pg_isready -usr/bin/pg_xlogdump -usr/bin/pg_basebackup -usr/bin/pg_test_fsync -usr/bin/pg_ctl -usr/bin/postmaster usr/bin/droplang usr/bin/pg_dump usr/bin/pg_restore @@ -43,18 +36,10 @@ usr/bin/reindexdb usr/bin/vacuumdb usr/bin/createlang usr/bin/pgbench -usr/bin/initdb usr/bin/createdb -usr/bin/pg_test_timing -usr/bin/pg_controldata usr/bin/createuser -usr/bin/postgres -usr/bin/pg_upgrade usr/bin/psql usr/bin/ecpg usr/bin/clusterdb -usr/bin/pg_archivecleanup -usr/bin/pg_receivexlog -usr/bin/pg_resetxlog usr/bin/dropdb usr/share/postgresql diff --git a/eselect/postgresql/active.links93 b/eselect/postgresql/active.links93 index aa40cd47..d38ad63e 100644 --- a/eselect/postgresql/active.links93 +++ b/eselect/postgresql/active.links93 @@ -1,10 +1,4 @@ -usr/bin/pg_standby93 usr/bin/pg_isready93 -usr/bin/pg_xlogdump93 -usr/bin/pg_basebackup93 -usr/bin/pg_test_fsync93 -usr/bin/pg_ctl93 -usr/bin/postmaster93 usr/bin/droplang93 usr/bin/pg_dump93 usr/bin/pg_restore93 @@ -17,17 +11,9 @@ usr/bin/reindexdb93 usr/bin/vacuumdb93 usr/bin/createlang93 usr/bin/pgbench93 -usr/bin/initdb93 usr/bin/createdb93 -usr/bin/pg_test_timing93 -usr/bin/pg_controldata93 usr/bin/createuser93 -usr/bin/postgres93 -usr/bin/pg_upgrade93 usr/bin/psql93 usr/bin/ecpg93 usr/bin/clusterdb93 -usr/bin/pg_archivecleanup93 -usr/bin/pg_receivexlog93 -usr/bin/pg_resetxlog93 usr/bin/dropdb93 diff --git a/eselect/postgresql/slots/9.3/base b/eselect/postgresql/slots/9.3/base index bd422ab6..7d4a07f9 100644 --- a/eselect/postgresql/slots/9.3/base +++ b/eselect/postgresql/slots/9.3/base @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.3.3" +postgres_ebuilds="${postgres_ebuilds} postgresql-base-9.3.5" diff --git a/eselect/postgresql/slots/9.3/docs b/eselect/postgresql/slots/9.3/docs index 4eda6eb2..41c72331 100644 --- a/eselect/postgresql/slots/9.3/docs +++ b/eselect/postgresql/slots/9.3/docs @@ -1 +1 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.3.3" +postgres_ebuilds="${postgres_ebuilds} postgresql-docs-9.3.5" diff --git a/eselect/postgresql/slots/9.3/server b/eselect/postgresql/slots/9.3/server deleted file mode 100644 index a71d49e9..00000000 --- a/eselect/postgresql/slots/9.3/server +++ /dev/null @@ -1 +0,0 @@ -postgres_ebuilds="${postgres_ebuilds} postgresql-server-9.3.3" diff --git a/games/chess-engines.conf b/games/chess-engines.conf deleted file mode 100644 index aaac9d02..00000000 --- a/games/chess-engines.conf +++ /dev/null @@ -1,145 +0,0 @@ -# GNOME Chess will detect any engines listed here - -[Amy] -protocol=cecp -binary=Amy -option-easy-0=easy -option-normal-0=easy -option-hard-0=hard - -[BBChess] -protocol=uci -binary=BBChess -uci-go-option-easy-0=depth 1 -uci-go-option-normal-0=depth 3 - -[Boo's Chess Engine] -protocol=cecp -binary=bce -option-easy-0=easy -option-easy-1=sd 1 -option-normal-0=easy -option-normal-1=sd 3 -option-hard-0=hard - -[Crafty] -protocol=cecp -binary=crafty -option-easy-0=ponder off -option-easy-1=sd 1 -option-normal-0=ponder off -option-normal-1=sd 3 -option-hard-0=ponder on - -[Diablo] -protocol=uci -binary=diablo -uci-go-option-easy-0=depth 1 -uci-go-option-normal-0=depth 3 - -[Faile] -protocol=cecp -binary=faile -option-easy-0=easy -option-easy-1=sd 1 -option-normal-0=easy -option-normal-1=sd 3 -option-hard-0=hard - -[Fairy-Max] -protocol=cecp -binary=fairymax -option-easy-0=easy -option-easy-1=sd 1 -option-normal-0=easy -option-normal-1=sd 3 -option-hard-0=hard - -[Fruit] -protocol=uci -binary=fruit -uci-go-option-easy-0=depth 1 -uci-go-option-normal-0=depth 3 - -[Gambit Fruit] -protocol=uci -binary=gfruit -uci-go-option-easy-0=depth 1 -uci-go-option-normal-0=depth 3 - -[Glaurung] -protocol=uci -binary=glaurung -uci-go-option-easy-0=depth 2 -uci-go-option-normal-0=depth 3 - -[GNUchess] -protocol=cecp -binary=gnuchess -arg-easy-0=--xboard -arg-normal-0=--xboard -arg-hard-0=--xboard -option-easy-0=easy -option-easy-1=depth 1 -option-normal-0=easy -option-normal-1=depth 3 -option-hard-0=hard - -[HoiChess] -protocol=cecp -binary=hoichess -option-easy-0=easy -option-easy-1=sd 2 -option-normal-0=easy -option-normal-1=sd 4 -option-hard-0=hard - -[Octochess] -protocol=cecp -binary=octochess -option-easy-0=easy -option-easy-1=sd 1 -option-normal-0=easy -option-normal-1=sd 3 -option-hard-0=hard - -[Phalanx] -protocol=cecp -binary=phalanx -arg-easy-0=-e100 -arg-normal-0=-e70 -option-easy-0=easy -option-easy-1=depth 2 -option-normal-0=easy -option-normal-1=depth 3 -option-hard-0=hard - -[Shredder] -protocol=uci -binary=ShredderClassicLinux -uci-go-option-easy-0=depth 1 -uci-go-option-normal-0=depth 3 - -[Sjeng] -protocol=cecp -binary=sjeng -option-easy-0=easy -option-easy-1=sd 1 -option-normal-0=easy -option-normal-1=sd 3 -option-hard-0=hard - -[Stockfish] -protocol=uci -binary=stockfish -option-easy-0=Skill Level 0 -option-normal-0=Skill Level 5 -option-hard-0=Skill Level 20 -uci-go-option-easy-0=depth 1 -uci-go-option-normal-0=depth 3 - -[Toga II] -protocol=uci -binary=toga2 -uci-go-option-easy-0=depth 1 -uci-go-option-normal-0=depth 3 diff --git a/games/gnome-chess/engines.conf b/games/gnome-chess/engines.conf new file mode 100644 index 00000000..507b5c42 --- /dev/null +++ b/games/gnome-chess/engines.conf @@ -0,0 +1,150 @@ +# GNOME Chess will detect any engines listed here + +[Amy] +protocol=cecp +binary=Amy +delay-before-move=0 +option-easy-0=easy +option-normal-0=easy +option-hard-0=hard + +[BBChess] +protocol=uci +binary=BBChess +uci-go-option-easy-0=depth 1 +uci-go-option-normal-0=depth 3 + +[Boo's Chess Engine] +protocol=cecp +binary=bce +option-easy-0=easy +option-easy-1=sd 1 +option-normal-0=easy +option-normal-1=sd 3 +option-hard-0=hard + +[Crafty] +protocol=cecp +binary=crafty +option-easy-0=ponder off +option-easy-1=sd 1 +option-normal-0=ponder off +option-normal-1=sd 3 +option-hard-0=ponder on + +[Diablo] +protocol=uci +binary=diablo +uci-go-option-easy-0=depth 1 +uci-go-option-normal-0=depth 3 + +[Faile] +protocol=cecp +binary=faile +option-easy-0=easy +option-easy-1=sd 1 +option-normal-0=easy +option-normal-1=sd 3 +option-hard-0=hard + +[Fairy-Max] +protocol=cecp +binary=fairymax +option-easy-0=easy +option-easy-1=sd 1 +option-normal-0=easy +option-normal-1=sd 3 +option-hard-0=hard + +[Fruit] +protocol=uci +binary=fruit +uci-go-option-easy-0=depth 1 +uci-go-option-normal-0=depth 3 + +[Gambit Fruit] +protocol=uci +binary=gfruit +uci-go-option-easy-0=depth 1 +uci-go-option-normal-0=depth 3 + +[Glaurung] +protocol=uci +binary=glaurung +uci-go-option-easy-0=depth 2 +uci-go-option-normal-0=depth 3 + +[GNU Chess] +protocol=uci +binary=gnuchess +arg-easy-0=--uci +arg-normal-0=--uci +arg-hard-0=--uci +option-easy-0=Material 10 +option-easy-1=Quiescence Check Plies 0 +option-easy-2=NullMove Pruning var Never +option-easy-3=Verification Search var Never +option-easy-4=History Pruning false +option-normal-0=Material 30 +option-normal-1=Quiescence Check Plies 0 +option-normal-2=NullMove Pruning var Never +option-normal-3=History Pruning false + +[HoiChess] +protocol=cecp +binary=hoichess +option-easy-0=easy +option-easy-1=sd 2 +option-normal-0=easy +option-normal-1=sd 4 +option-hard-0=hard + +[Octochess] +protocol=cecp +binary=octochess +option-easy-0=easy +option-easy-1=sd 1 +option-normal-0=easy +option-normal-1=sd 3 +option-hard-0=hard + +[Phalanx] +protocol=cecp +binary=phalanx +arg-easy-0=-e100 +arg-normal-0=-e70 +option-easy-0=easy +option-easy-1=depth 2 +option-normal-0=easy +option-normal-1=depth 3 +option-hard-0=hard + +[Shredder] +protocol=uci +binary=ShredderClassicLinux +uci-go-option-easy-0=depth 1 +uci-go-option-normal-0=depth 3 + +[Sjeng] +protocol=cecp +binary=sjeng +option-easy-0=easy +option-easy-1=sd 1 +option-normal-0=easy +option-normal-1=sd 3 +option-hard-0=hard + +[Stockfish] +protocol=uci +binary=stockfish +option-easy-0=Skill Level 0 +option-normal-0=Skill Level 5 +option-hard-0=Skill Level 20 +uci-go-option-easy-0=depth 1 +uci-go-option-normal-0=depth 3 + +[Toga II] +protocol=uci +binary=toga2 +uci-go-option-easy-0=depth 1 +uci-go-option-normal-0=depth 3 diff --git a/gconf/gconf.xml.defaults/%gconf-tree.xml b/gconf/gconf.xml.defaults/%gconf-tree.xml index 4a6be91c..84b83cd7 100644 --- a/gconf/gconf.xml.defaults/%gconf-tree.xml +++ b/gconf/gconf.xml.defaults/%gconf-tree.xml @@ -1499,28 +1499,28 @@ - - - - - - - - - + + + + + + + + + - - + + - - + + - - - - + + + + @@ -2114,35 +2114,35 @@ - - - - - - - - - + + + + + + + + + - - - - - - - - - + + + + + + + + + - - - - - - - - + + + + + + + + @@ -2382,88 +2382,88 @@ - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + @@ -2946,39 +2946,39 @@ - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + @@ -3041,54 +3041,54 @@ - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + @@ -3125,11 +3125,11 @@ - + - - + + @@ -13129,13 +13129,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + Whether or not the tray icon shows song change notifications - + amazondevtag @@ -13143,7 +13143,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Your Amazon Dev Tag for fetching album cover art - + us @@ -13151,7 +13151,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Which Amazon site to use for fetching album images, "us", "uk", "de", or "jp". - + ~/Music/Playlists/ @@ -13159,7 +13159,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Last used folder from the playlist file selectors. - + ~/Music/ @@ -13167,39 +13167,39 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Last used folder from "Import folder" dialog. - + Only deal with complete albums in the interface. - + Folders that are monitored for changes. - + Whether or not to enable repeat playlist mode. - + Volume level. 0 = lowest, 100 = highest. - + Height of the "Add album" window. - + Width of the "Add album" window. @@ -13207,13 +13207,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + Height of the "Add song" window. - + Width of the "Add song" window. @@ -13221,25 +13221,25 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + Vertical position of the playlist window. - + Horizontal position of the playlist window. - + Height of the playlist window. - + Width of the playlist window. @@ -16525,14 +16525,14 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + The milliseconds to show property panel after focus-in or properties are changed. - + Sans 10 @@ -16540,41 +16540,41 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Custom font name for language panel - + Use custom font name for language panel - + Show input method name on language bar - + Show icon on system tray - + Orientation of lookup table. 0 = Horizontal, 1 = Vertical - + - + - + The behavior of property panel. 0 = Do not show, 1 = Auto hide, 2 = Always show @@ -16582,7 +16582,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + @@ -16593,7 +16593,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - +
  • @@ -16609,32 +16609,32 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Prefixes of DConf keys to stop name conversion - + Enable input method by default when the application gets input focus - + Share the same input method among all applications - + Embed Preedit Text in Application Window - + Use system keyboard (XKB) layout - + Set popup delay milliseconds to show IME switcher window. @@ -16645,14 +16645,14 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + Saved engines order in input method list - + @@ -16660,21 +16660,21 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + The shortcut keys for switching to the previous input method - + The shortcut keys for switching to the previous input method - +
  • @@ -16684,7 +16684,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The shortcut keys for switching to the next input method in the list - +
  • @@ -16694,21 +16694,21 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The shortcut keys for switching to the next input method in the list - + The shortcut keys for turning input method off - + The shortcut keys for turning input method on - +
  • @@ -16718,7 +16718,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The shortcut keys for turning input method on or off - +
  • @@ -18205,294 +18205,294 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + - + /usr/bin/ufraw-batch --embedded-image --out-type=png --size=%s %i --overwrite --silent --output=%o - + @@ -20222,13 +20222,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20236,7 +20236,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "ymsgr" URLs, if enabled. - + True if the command specified in the "command" key should handle "ymsgr" URLs. @@ -20244,13 +20244,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20258,7 +20258,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "xmpp" URLs, if enabled. - + True if the command specified in the "command" key should handle "xmpp" URLs. @@ -20266,13 +20266,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20280,7 +20280,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "sip" URLs, if enabled. - + True if the command specified in the "command" key should handle "sip" URLs. @@ -20288,13 +20288,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20302,7 +20302,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "msnim" URLs, if enabled. - + True if the command specified in the "command" key should handle "msnim" URLs. @@ -20310,13 +20310,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20324,7 +20324,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "irc" URLs, if enabled. - + True if the command specified in the "command" key should handle "irc" URLs. @@ -20332,13 +20332,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20346,7 +20346,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "icq" URLs, if enabled. - + True if the command specified in the "command" key should handle "icq" URLs. @@ -20354,13 +20354,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20368,7 +20368,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "gg" URLs, if enabled. - + True if the command specified in the "command" key should handle "gg" URLs. @@ -20610,13 +20610,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + gnomemeeting -c %s @@ -20624,7 +20624,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "h323" URLs, if enabled. - + True if the command specified in the "command" key should handle "h323" URLs. @@ -20632,13 +20632,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + gnomemeeting -c %s @@ -20646,7 +20646,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "callto" URLs, if enabled. - + True if the command specified in the "command" key should handle "callto" URLs. @@ -20654,13 +20654,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20668,7 +20668,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "aim" URLs, if enabled. - + True if the command specified in the "command" key should handle "aim" URLs. @@ -20676,13 +20676,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + evolution %s @@ -20690,7 +20690,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "mailto" URLs, if enabled. - + True if the command specified in the "command" key should handle "mailto" URLs. @@ -20698,13 +20698,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + epiphany %s @@ -20712,7 +20712,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "https" URLs, if enabled. - + True if the command specified in the "command" key should handle "https" URLs. @@ -20720,13 +20720,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + epiphany %s @@ -20734,7 +20734,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "http" URLs, if enabled. - + True if the command specified in the "command" key should handle "http" URLs. @@ -20742,13 +20742,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + gnome-help "%s" @@ -20756,7 +20756,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "man" URLs, if enabled. - + True if the command specified in the "command" key should handle "man" URLs. @@ -20764,13 +20764,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + gnome-help "%s" @@ -20778,7 +20778,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "info" URLs, if enabled. - + True if the command specified in the "command" key should handle "info" URLs. @@ -20786,13 +20786,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + gnome-help "%s" @@ -20800,7 +20800,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "ghelp" URLs, if enabled. - + True if the command specified in the "command" key should handle "ghelp" URLs. @@ -20808,13 +20808,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + nautilus "%s" @@ -20822,7 +20822,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "trash" URLs, if enabled. - + True if the command specified in the "command" key should handle "trash" URLs. @@ -20978,7 +20978,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + nautilus %s @@ -20988,7 +20988,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + -x @@ -20996,7 +20996,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The exec argument to use for the default terminal application. - + gnome-terminal @@ -21012,7 +21012,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + goom @@ -21020,7 +21020,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati GStreamer can put visualization plugins in a pipeline to transform audio stream in video frames. Default is goom but more visualization plugins will be ported soon. The visualization plugin can be a partial pipeline instead of just one element. - + v4l2src @@ -21028,7 +21028,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati GStreamer can record video from any number of input elements. Some possible choices are v4lsrc and videotestsrc. The video source can be a partial pipeline instead of just one element. - + Default @@ -21036,7 +21036,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Describes the selected input element. - + alsasrc @@ -21044,7 +21044,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati GStreamer can record audio using any number of input elements. Some possible choices are osssrc, esdsrc and alsasrc. The audio source can be a partial pipeline instead of just one element. - + autovideosink @@ -21052,7 +21052,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati GStreamer can play video using any number of output elements. Some possible choices are xvimagesink, ximagesink, sdlvideosink and aasink. The videosink can be a partial pipeline instead of just one element. - + Default @@ -21060,7 +21060,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Describes the selected output element for Audio/Video Conferencing. - + autoaudiosink @@ -21068,7 +21068,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati GStreamer can play audio using any number of output elements. Some possible choices are osssink, esdsink and alsasink. The audiosink can be a partial pipeline instead of just one element. - + Default @@ -21076,7 +21076,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Describes the selected output element for Music and Movies. - + autoaudiosink @@ -21084,7 +21084,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati GStreamer can play audio using any number of output elements. Some possible choices are osssink, esdsink and alsasink. The audiosink can be a partial pipeline instead of just one element. - + Default @@ -21092,7 +21092,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Describes the selected output element. - + autoaudiosink @@ -21796,7 +21796,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + @@ -21808,7 +21808,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + @@ -21816,14 +21816,14 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati URL that provides proxy configuration values. - + The port on the machine defined by "/system/proxy/socks_host" that you proxy through. - + @@ -21831,14 +21831,14 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The machine name to proxy socks through. - + The port on the machine defined by "/system/proxy/ftp_host" that you proxy through. - + @@ -21846,14 +21846,14 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The machine name to proxy FTP through. - + The port on the machine defined by "/system/proxy/secure_host" that you proxy through. - + @@ -21861,7 +21861,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The machine name to proxy secure HTTP through. - + none @@ -21872,7 +21872,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - +
  • @@ -21889,7 +21889,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati netmask (something like 192.168.0.0/24). - + @@ -21897,7 +21897,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati Password to pass as authentication when doing HTTP proxying. - + @@ -21905,7 +21905,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati User name to pass as authentication when doing HTTP proxying. - + If true, then connections to the proxy server require @@ -21914,14 +21914,14 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati "/system/http_proxy/authentication_password". - + The port on the machine defined by "/system/http_proxy/host" that you proxy through. - + @@ -21929,7 +21929,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The machine name to proxy HTTP through. - + Enables the proxy settings when accessing HTTP over the @@ -21938,7 +21938,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati
    • - + @@ -21947,7 +21947,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati visible in the "network:///" location. - + merged @@ -21962,17 +21962,17 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - - - - - - - - - - - + + + + + + + + + + + @@ -22033,30 +22033,30 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + - - - - - - - - + + + + + + + + - - - - - - - + + + + + + + - - + + diff --git a/gconf/schemas/sound-juicer.schemas b/gconf/schemas/sound-juicer.schemas deleted file mode 100644 index a7ddf1b4..00000000 --- a/gconf/schemas/sound-juicer.schemas +++ /dev/null @@ -1,388 +0,0 @@ - - - - - - - /schemas/apps/sound-juicer/device - /apps/sound-juicer/device - string - sound-juicer - - - The CD to extract from. - - - - - /schemas/apps/sound-juicer/eject - /apps/sound-juicer/eject - bool - sound-juicer - false - - Whether to eject the CD when finished extracting. - - - - Soll die CD nach dem erfolgreichen Auslesen ausgeworfen werden? - - - - Whether to eject the CD when finished extracting. - - - - Извлекать ли CD после окончания копирования. - - - - Nhả CD khi trích xong hay không. - - - - - /schemas/apps/sound-juicer/open_completed - /apps/sound-juicer/open_completed - bool - sound-juicer - false - - Whether to open the target directory when finished extracting. - - - - Soll nach dem Auslesen der Musikordner geöffnet werden? - - - - Whether to open the target directory when finished extracting. - - - - Следует ли после завершения копирования открывать каталог, в котором была сохранена музыка. - - - - Có nên mở thÆ° mục đích khi trích xong hay không. - - - - - /schemas/apps/sound-juicer/base_uri - /apps/sound-juicer/base_uri - string - sound-juicer - - - The URI to save the extracted music to. - - - - - /schemas/apps/sound-juicer/base_path - /apps/sound-juicer/base_path - string - sound-juicer - - - The local directory to save the extracted music to (deprecated, use base_uri) - - - - - /schemas/apps/sound-juicer/path_pattern - /apps/sound-juicer/path_pattern - string - sound-juicer - %aa/%at - - The directory structure for the files - - %at -- album title - %aT -- album title (lowercase) - %aa -- album artist - %aA -- album artist (lowercase) - %as -- album artist (sortable) - %aS -- album artist (sortable lowercase) - %ac -- album composer - %aC -- album composer (lowercase) - %ap -- album composer (sortable) - %aP -- album composer (sortable lowercase) - %ay -- album year - %tt -- track title - %tT -- track title (lowercase) - %ta -- track artist - %tA -- track artist (lowercase) - %ts -- track artist (sortable) - %tS -- track artist (sortable lowercase) - %tc -- track composer - %tC -- track composer (lowercase) - %tp -- track composer (sortable) - %tP -- track composer (sortable lowercase) - - - - - Die Ordnerstruktur für die Dateien - %at -- Albentitel %aT -- Albentitel (Kleinschreibung) %aa -- Albeninterpret %aA -- Albeninterpret (Kleinschreibung) %as -- Albeninterpret (sortierbar, Kleinschreibung) %aS -- Albeninterpret (sortierbar, Kleinschreibung) %ac -- Albenkomponist %aC -- Albenkomponist (Kleinschreibung) %ap -- Albenkomponist (sortierbar) %aP -- Albenkomponist (sortierbar, Kleinschreibung) %ay -- Albenjahr %tt -- Titelname %tT -- Titelname (Kleinschreibung) %ta -- Titelinterpret %tA -- Titelinterpret (Kleinschreibung) %ts -- Titelinterpret (sortierbar) %tS -- Titelinterpret (sortierbar, Kleinschreibung) %tc -- Titelkomponist %tC -- Titelkomponist (Kleinschreibung) %tp -- Titelkomponist (sortierbar) %tP -- Titelkomponist (sortierbar, Kleinschreibung) - - - - The directory structure for the files - - - - - Структура каталогов для файлов - %at — название альбома; %aT — название альбома (в нижнем регистре); %aa — исполнитель альбома; %aA — исполнитель альбома (в нижнем регистре); %as — исполнитель альбома (упорядочиваемый); %aS — исполнитель альбома (в нижнем регистре, упорядочиваемый); %ac — композитор альбома; %ac — композитор альбома (в нижнем регистре); %ap — композитор альбома (упорядочиваемый); %aP — композитор альбома (в нижнем регистре, упорядочиваемый); %ay — год выпуска альбома; %tt — название дорожки; %tT — название дорожки (в нижнем регистре); %ta — исполнитель дорожки; %tA — исполнитель дорожки (в нижнем регистре); %ts — исполнитель дорожки (упорядочиваемый); %tS — исполнитель дорожки (в нижнем регистре, упорядочиваемый); %tc — композитор дорожки; %tC — композитор дорожки (в нижнем регистре); %tp — композитор дорожки (упорядочиваемый); %tP — композитор дорожки (в нижнем регистре, упорядочиваемый) - - - - Cấu trúc thÆ° mục cho tập tin - - - - - - /schemas/apps/sound-juicer/file_pattern - /apps/sound-juicer/file_pattern - string - sound-juicer - %dn - %tt - - The name pattern for files - - Do not specify an extension. - %at -- album title - %aT -- album title (lowercase) - %aa -- album artist - %aA -- album artist (lowercase) - %as -- album artist (sortable) - %aS -- album artist (sortable lowercase) - %ac -- album composer - %aC -- album composer (lowercase) - %ap -- album composer (sortable) - %aP -- album composer (sortable lowercase) - %tn -- track number (i.e 8) - %tN -- track number, zero padded (i.e 08) - %tt -- track title - %tT -- track title (lowercase) - %ta -- track artist - %tA -- track artist (lowercase) - %ts -- track artist (sortable) - %tS -- track artist (sortable lowercase) - %tc -- track composer - %tC -- track composer (lowercase) - %tp -- track composer (sortable) - %tP -- track composer (sortable lowercase) - %dn -- disc and track number, track zero padded (i.e Disk 2 - 06, or 06) - %dN -- condensed disc and track number, zero padded (i.e d02t06, or 06) - - - - - Das Muster der Dateinamen - Keine Erweiterung angeben. %at -- Albentitel %aT -- Albentitel (Kleinschreibung) %aa -- Albeninterpret %aA -- Albeninterpret (Kleinschreibung) %as -- Albeninterpret (sortierbar, Kleinschreibung) %aS -- Albeninterpret (sortierbar, Kleinschreibung) %ac -- Albenkomponist %aC -- Albenkomponist (Kleinschreibung) %ap -- Albenkomponist (sortierbar) %aP -- Albenkomponist (sortierbar Kleinschreibung) %tn -- Titelnummer (z.B. »8«) %tN -- Titelnummer, vorangestellte Null (z.B. 08) %tt -- Titelname %tT -- Titelname (Kleinschreibung) %ta -- Titelinterpret %tA -- Titelinterpret (Kleinschreibung) %ts -- Titelinterpret (sortierbar) %tS -- Titelinterpret (sortierbar, Kleinschreibung) %tc -- Titelkomponist %tC -- Titelkomponist (Kleinschreibung) %tp -- Titelkomponist (sortierbar) %tP -- Titelkomponist (sortierbar, Kleinschreibung) %dn -- CD- und Titelnummer (z.B. »CD 2 - 06«, oder »06«) %dN -- CD-Nummer, vorangestellte Null (z.B. »d02t06« oder »06«) - - - - The name pattern for files - - - - - Шаблон имён файлов - Не указывайте расширение. %at — название альбома; %aT — название альбома в нижнем регистре; %aa — исполнитель альбома; %aA — исполнитель альбома в нижнем регистре; %as — исполнитель альбома (упорядочиваемый); %aS — исполнитель альбома (в нижнем регистре, упорядочиваемый); %ac — композитор альбома; %ac — композитор альбома (в нижнем регистре); %ap — композитор альбома (упорядочиваемый); %aP — композитор альбома (в нижнем регистре, упорядочиваемый);%tn — номер дорожки (например, «8»); %tN — номер дорожки с добавлением нулей (например, «08»); %tt — название дорожки; %tT — название дорожки (в нижнем регистре); %ta — исполнитель дорожки; %tA — исполнитель дорожки (в нижнем регистре); %ts — исполнитель дорожки (упорядочиваемый); %tS — исполнитель дорожки (в нижнем регистре, упорядочиваемый); %tc — композитор дорожки; %tC — композитор дорожки (в нижнем регистре); %tp — композитор дорожки (упорядочиваемый); %tP — композитор дорожки (в нижнем регистре, упорядочиваемый); %dn — номер диска и дорожки (например, «Диск 2 - 06», или просто «06»); %dN — номер диска, дополненный нулями (например, «d02t06» или «06»). - - - - Mẫu tên cho tập tin - - - - - - /schemas/apps/sound-juicer/paranoia - /apps/sound-juicer/paranoia - int - sound-juicer - 8 - - The paranoia mode to use - - Paranoia mode: 0) disable 2) fragment 4) overlap 8) scratch 16) repair 255) full - - - - - Der zu verwendende paranoia-Modus - Paranoia-Modus: 0) deaktivieren 2) Fragment 4) überlappen 8) Kratzer 16 ) reparieren 255) komplett - - - - The paranoia mode to use - Paranoia mode: 0) disable 2) fragment 4) overlap 8) scratch 16) repair 255) full - - - - Используемый режим paranoia - Режим Paranoia: 0 — выключить; 2 — по фрагментам; 4 — с перекрытием; 8 — быстро; 16 — восстановить; 255 — всё вместе - - - - Chế độ an toàn cần dùng - Chế độ an toàn: 0) tắt 2) phân mảnh 4) xếp chồng 8) tạm 16) sá»­a chữa 255) đầy đủ - - - - - /schemas/apps/sound-juicer/strip-special - /apps/sound-juicer/strip-special - bool - sound-juicer - false - - If to strip special characters from filenames - - If enabled, special characters such as space, wildcards and - backslashes will be removed from the output filename. - - - - - Sonderzeichen aus Dateinamen entfernen? - Sollen Sonderzeichen wie Leer- und Jokerzeichen sowie Schrägstriche von den Ausgabe-Dateiname entfernt werden? - - - - If to strip special characters from filenames - If enabled, special characters such as space, wildcards and backslashes will be removed from the output filename. - - - - Вырезать ли специальные символы из имён файлов - Если этот ключ установлен, специальные символы — такие, как пробелы, символы шаблонов и обратные косые черты — будут удаляться из имён создаваемых файлов. - - - - Để gỡ bỏ kí tá»± đặc biệt ra khỏi tên tập tin - Khi cho phép, sẽ loại bỏ mọi kí tá»± đặc biệt (nhÆ° dấu cách, kí tá»± đại diện và dấu số ngược) ra khỏi tên tập tin đầu ra. - - - - - /schemas/apps/sound-juicer/musicbrainz_server - /apps/sound-juicer/musicbrainz_server - string - sound-juicer - - - The MusicBrainz server to use - - If specified, this value will override the default MusicBrainz - server. - - - - - Der zu verwendende MusicBrainz-Server - Falls hier ein Wert angegeben ist, überschreibt dieser den Wert des Standard-MusicBrainz-Servers. - - - - The MusicBrainz server to use - If specified, this value will override the default MusicBrainz server. - - - - Используемый сервер MusicBrainz - Если это значение указано, оно будет использоваться вместо сервера MusicBrainz по умолчанию. - - - - Máy chủ MusicBrainz cần dùng - Khi được ghi rõ, giá trị này sẽ chiếm quyền máy chủ MusicBrainz mặc định. - - - - - /schemas/apps/sound-juicer/audio_profile - /apps/sound-juicer/audio_profile - string - sound-juicer - cdlossy - - (obsolete) Audio Profile with which to encode - - This key used to store the GNOME Audio Profile with which to encode. - This has been superseded by GStreamer encoding profiles, which are - configured using the audio_profile_media_type key. - - - - - (veraltet) Audioprofil, mit dem kodiert werden soll - Dieser Schlüssel gibt das GNOME-Audioprofil an, das als Ziel der Enkodierung verwendet werden soll. Dies wurde durch GSteamer-Enkodierungsprofile abgelöst, welche im Schlüssel »audio_profile_media_type« festgelegt werden.c - - - - (устарело) Звуковой профиль для кодирования - Это ключ используется для хранения звукового профиля GNOME, который будет применяться для кодирования. Заменяется профилями кодирования GStreamer, которые настраиваются ключом audio_profile_media_type. - - - - - /schemas/apps/sound-juicer/audio_profile_media_type - /apps/sound-juicer/audio_profile_media_type - string - sound-juicer - audio/x-vorbis - - Media type to encode to - - The GStreamer media type to encode to. - - - - - Medien-Zieltyp der Enkodierung - Der GStreamer-Medientyp, in den enkodiert werden soll. - - - - Медиатип носителя для кодирования - Медиатип GStreamer для кодирования. - - - - - - /schemas/apps/sound-juicer/volume - /apps/sound-juicer/volume - float - sound-juicer - 1.0 - - Audio volume - - - - Audio-Lautstärke - - - - Audio volume - - - - Громкость - - - - Âm lượng - - - - - diff --git a/gdm/Xsession b/gdm/Xsession index 1faba3f4..3ed84dfb 100755 --- a/gdm/Xsession +++ b/gdm/Xsession @@ -146,13 +146,6 @@ fi unset XKB_IN_USE -# Overwrite $LANG from /etc/profile (and friends) with the one picked in the -# greeter -if [ -n "$GDM_LANG" ]; then - LANG="$GDM_LANG" - export LANG -fi - xhost +si:localuser:`id -un` || : if [ "x$command" = "xcustom" ] ; then diff --git a/gentoo-init.lisp b/gentoo-init.lisp deleted file mode 100644 index e09dcb0a..00000000 --- a/gentoo-init.lisp +++ /dev/null @@ -1,7 +0,0 @@ -(in-package #:cl-user) -#+(or sbcl ecl) (require :asdf) -#-(or sbcl ecl) (load #p"/usr/share/common-lisp/source/asdf/asdf.lisp") -(push #p"/usr/share/common-lisp/systems/" asdf:*central-registry*) -(asdf:oos 'asdf:load-op :asdf-binary-locations) -(setf asdf:*centralize-lisp-binaries* t) -(setf asdf:*source-to-target-mappings* '((#p"/usr/lib/sbcl/" nil) (#p"/usr/lib64/sbcl/" nil))) diff --git a/geoclue/geoclue.conf b/geoclue/geoclue.conf new file mode 100644 index 00000000..88a227ed --- /dev/null +++ b/geoclue/geoclue.conf @@ -0,0 +1,67 @@ +# Configuration file for Geoclue + +# Agent configuration options +[agent] + +# Whitelist of desktop IDs (without .desktop part) of all agents we recognise, +# separated by a ';'. +whitelist=gnome-shell + +# WiFi source configuration options +[wifi] + +# URL to the wifi geolocation service. The key can currenty be anything, just +# needs to be present but that is likely going to change in future. +url=https://location.services.mozilla.com/v1/geolocate?key=geoclue + +# To use the Google geolocation service instead of mozilla's, simply uncomment +# this url while changing API_KEY to your Google API key and comment out or +# remove the url above. +# +#url=https://www.googleapis.com/geolocation/v1/geolocate?key=YOUR_KEY + +# Submit data to Mozilla Location Service +# If set to true, geoclue will automatically submit network data to Mozilla +# each time it gets a GPS lock. +# +submit-data=false + +# URL to submission API of Mozilla Location Service +submission-url=https://location.services.mozilla.com/v1/submit?key=geoclue + +# A nickname to submit network data with. This is currently used for leaderboard: +# https://location.services.mozilla.com/leaders +# A nickname must be 2-32 characters long. +submission-nick=geoclue + +# Application configuration options +# +# Format: +# +# # Desktop ID of application without .desktop part +# [random-app] +# +# # Allowed access to location information? +# allowed=true|false +# +# # Is application a system component? +# system=true|false +# +# # List of UIDs of all users for which this application is allowed location +# # info access, separate by ';'. Keep it empty for allowing it for all users. +# users= + +[gnome-datetime-panel] +allowed=true +system=true +users= + +[epiphany] +allowed=true +system=false +users= + +[firefox] +allowed=true +system=false +users= diff --git a/group b/group index c65f62e7..3a62aaab 100644 --- a/group +++ b/group @@ -75,3 +75,8 @@ geoclue:x:982: samba:x:981: davfs2:x:980: dhcp:x:979: +input:x:978: +systemd-bus-proxy:x:977: +systemd-network:x:976: +systemd-resolve:x:975: +systemd-timesync:x:974: diff --git a/group- b/group- index b1fd3219..02222326 100644 --- a/group- +++ b/group- @@ -74,3 +74,8 @@ colord:x:983: geoclue:x:982: samba:x:981: davfs2:x:980: +dhcp:x:979: +input:x:978: +systemd-bus-proxy:x:977: +systemd-network:x:976: +systemd-resolve:x:975: diff --git a/grub.d/00_header b/grub.d/00_header index 3c6370d8..fb9b8594 100755 --- a/grub.d/00_header +++ b/grub.d/00_header @@ -18,8 +18,8 @@ set -e # along with GRUB. If not, see . prefix="/usr" -exec_prefix="${prefix}" -datarootdir="${prefix}/share" +exec_prefix="/usr" +datarootdir="/usr/share" grub_lang=`echo $LANG | cut -d . -f 1` export TEXTDOMAIN=grub @@ -191,7 +191,7 @@ EOF EOF # Gettext variables and module -if [ "x${LANG}" != "xC" ] ; then +if [ "x${LANG}" != "xC" ] && [ "x${LANG}" != "x" ]; then cat << EOF set locale_dir=\$prefix/locale set lang=${grub_lang} @@ -282,34 +282,62 @@ fi make_timeout () { - if [ "x${1}" != "x" ] ; then + if [ "x${3}" != "x" ] ; then + timeout="${2}" + style="${3}" + elif [ "x${1}" != "x" -a "x${1}" != "x0" ] ; then + # Handle the deprecated GRUB_HIDDEN_TIMEOUT scheme. + timeout="${1}" + if [ "x${2}" != "x0" ] ; then + grub_warn "$(gettext "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.")" + fi if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then + style="hidden" verbose= else + style="countdown" verbose=" --verbose" fi + else + # No hidden timeout, so treat as GRUB_TIMEOUT_STYLE=menu + timeout="${2}" + style="menu" + fi + cat << EOF +if [ x\$feature_timeout_style = xy ] ; then + set timeout_style=${style} + set timeout=${timeout} +EOF + if [ "x${style}" = "xmenu" ] ; then cat << EOF -if sleep$verbose --interruptible ${1} ; then - set timeout=${2} -fi +# Fallback normal timeout code in case the timeout_style feature is +# unavailable. +else + set timeout=${timeout} EOF else cat << EOF -set timeout=${2} +# Fallback hidden-timeout code in case the timeout_style feature is +# unavailable. +elif sleep${verbose} --interruptible ${timeout} ; then + set timeout=0 EOF fi + cat << EOF +fi +EOF } if [ "x$GRUB_BUTTON_CMOS_ADDRESS" != "x" ]; then cat <. prefix="/usr" -exec_prefix="${prefix}" -datarootdir="${prefix}/share" +exec_prefix="/usr" +datarootdir="/usr/share" . "/usr/share/grub/grub-mkconfig_lib" @@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then OS=GNU/Linux else OS="${GRUB_DISTRIBUTOR} GNU/Linux" - CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1) ${CLASS}" + CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}" fi # loop-AES arranges things so that /dev/loop/X can be our root device, but @@ -51,13 +51,7 @@ else LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID} fi -GRUBFS="`${grub_probe} --device ${GRUB_DEVICE} --target=fs 2>/dev/null || true`" - -if [ x"$GRUBFS" = x ]; then - GRUBFS="$(stat -f --printf=%T / || true)" -fi - -case x"$GRUBFS" in +case x"$GRUB_FS" in xbtrfs) rootsubvol="`make_system_path_relative_to_its_root /`" rootsubvol="${rootsubvol#/}" @@ -110,7 +104,9 @@ linux_entry () echo " load_video" | sed "s/^/$submenu_indentation/" if grep -qx "CONFIG_FB_EFI=y" "${config}" 2> /dev/null \ && grep -qx "CONFIG_VT_HW_CONSOLE_BINDING=y" "${config}" 2> /dev/null; then - echo " set gfxpayload=keep" | sed "s/^/$submenu_indentation/" + echo ' if [ "x$grub_platform" = xefi ]; then' | sed "s/^/$submenu_indentation/" + echo " set gfxpayload=keep" | sed "s/^/$submenu_indentation/" + echo ' fi' | sed "s/^/$submenu_indentation/" fi else if [ "x$GRUB_GFXPAYLOAD_LINUX" != xtext ]; then @@ -179,7 +175,7 @@ title_correction_code= # yet, so it's empty. In a submenu it will be equal to '\t' (one tab). submenu_indentation="" -is_first_entry=true +is_top_level=true while [ "x$list" != "x" ] ; do linux=`version_find_latest $list` gettext_printf "Found linux image: %s\n" "$linux" >&2 @@ -226,7 +222,7 @@ while [ "x$list" != "x" ] ; do linux_root_device_thisversion=${GRUB_DEVICE} fi - if [ "x$is_first_entry" = xtrue ]; then + if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then linux_entry "${OS}" "${version}" simple \ "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" @@ -237,6 +233,7 @@ while [ "x$list" != "x" ] ; do fi # TRANSLATORS: %s is replaced with an OS name echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {" + is_top_level=false fi linux_entry "${OS}" "${version}" advanced \ @@ -246,13 +243,12 @@ while [ "x$list" != "x" ] ; do "single ${GRUB_CMDLINE_LINUX}" fi - list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '` - is_first_entry=false + list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '` done # If at least one kernel was found, then we need to # add a closing '}' for the submenu command. -if [ x"$is_first_entry" != xtrue ]; then +if [ x"$is_top_level" != xtrue ]; then echo '}' fi diff --git a/grub.d/20_linux_xen b/grub.d/20_linux_xen index dbd88911..bf48f2bf 100755 --- a/grub.d/20_linux_xen +++ b/grub.d/20_linux_xen @@ -18,8 +18,8 @@ set -e # along with GRUB. If not, see . prefix="/usr" -exec_prefix="${prefix}" -datarootdir="${prefix}/share" +exec_prefix="/usr" +datarootdir="/usr/share" . "/usr/share/grub/grub-mkconfig_lib" @@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then OS=GNU/Linux else OS="${GRUB_DISTRIBUTOR} GNU/Linux" - CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1) ${CLASS}" + CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}" fi # loop-AES arranges things so that /dev/loop/X can be our root device, but @@ -59,13 +59,7 @@ if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}" ]; then GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}" fi -GRUBFS="`${grub_probe} --device ${GRUB_DEVICE} --target=fs 2>/dev/null || true`" - -if [ x"$GRUBFS" = x ]; then - GRUBFS="$(stat -f --printf=%T /)" -fi - -case x"$GRUBFS" in +case x"$GRUB_FS" in xbtrfs) rootsubvol="`make_system_path_relative_to_its_root /`" rootsubvol="${rootsubvol#/}" @@ -135,7 +129,7 @@ EOF message="$(gettext_printf "Loading initial ramdisk ...")" sed "s/^/$submenu_indentation/" << EOF echo '$(echo "$message" | grub_quote)' - module ${rel_dirname}/${initrd} + module --nounzip ${rel_dirname}/${initrd} EOF fi sed "s/^/$submenu_indentation/" << EOF @@ -193,7 +187,7 @@ esac # yet, so it's empty. In a submenu it will be equal to '\t' (one tab). submenu_indentation="" -is_first_entry=true +is_top_level=true while [ "x${xen_list}" != "x" ] ; do list="${linux_list}" @@ -205,7 +199,7 @@ while [ "x${xen_list}" != "x" ] ; do if [ -z "$boot_device_id" ]; then boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")" fi - if [ "x$is_first_entry" != xtrue ]; then + if [ "x$is_top_level" != xtrue ]; then echo " submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {" fi while [ "x$list" != "x" ] ; do @@ -239,7 +233,7 @@ while [ "x${xen_list}" != "x" ] ; do linux_root_device_thisversion=${GRUB_DEVICE} fi - if [ "x$is_first_entry" = xtrue ]; then + if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then linux_entry "${OS}" "${version}" "${xen_version}" simple \ "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}" @@ -251,8 +245,8 @@ while [ "x${xen_list}" != "x" ] ; do # TRANSLATORS: %s is replaced with an OS name echo "submenu '$(gettext_printf "Advanced options for %s (with Xen hypervisor)" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {" echo " submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {" + is_top_level=false fi - is_first_entry=false linux_entry "${OS}" "${version}" "${xen_version}" advanced \ "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}" @@ -261,17 +255,17 @@ while [ "x${xen_list}" != "x" ] ; do "single ${GRUB_CMDLINE_LINUX}" "${GRUB_CMDLINE_XEN}" fi - list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '` + list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '` done - if [ x"$is_first_entry" != xtrue ]; then + if [ x"$is_top_level" != xtrue ]; then echo ' }' fi - xen_list=`echo $xen_list | tr ' ' '\n' | grep -vx $current_xen | tr '\n' ' '` + xen_list=`echo $xen_list | tr ' ' '\n' | fgrep -vx "$current_xen" | tr '\n' ' '` done # If at least one kernel was found, then we need to # add a closing '}' for the submenu command. -if [ x"$is_first_entry" != xtrue ]; then +if [ x"$is_top_level" != xtrue ]; then echo '}' fi diff --git a/grub.d/30_os-prober b/grub.d/30_os-prober index 4af65f2c..4c1b457e 100755 --- a/grub.d/30_os-prober +++ b/grub.d/30_os-prober @@ -18,8 +18,8 @@ set -e # along with GRUB. If not, see . prefix="/usr" -exec_prefix="${prefix}" -datarootdir="${prefix}/share" +exec_prefix="/usr" +datarootdir="/usr/share" export TEXTDOMAIN=grub export TEXTDOMAINDIR="${datarootdir}/locale" @@ -112,6 +112,18 @@ for OS in ${OSPROBED} ; do LONGNAME="`echo ${OS} | cut -d ':' -f 2 | tr '^' ' '`" LABEL="`echo ${OS} | cut -d ':' -f 3 | tr '^' ' '`" BOOT="`echo ${OS} | cut -d ':' -f 4`" + UUID="`${grub_probe} --target=fs_uuid --device ${DEVICE%@*}`" + EXPUUID="$UUID" + + if [ x"${DEVICE#*@}" != x ] ; then + EXPUUID="${EXPUUID}@${DEVICE#*@}" + fi + + if [ "x${GRUB_OS_PROBER_SKIP_LIST}" != "x" -a "x`echo ${GRUB_OS_PROBER_SKIP_LIST} | grep -i -e '\b'${EXPUUID}'\b'`" != "x" ] ; then + echo "Skipped ${LONGNAME} on ${DEVICE} by user request." >&2 + continue + fi + BTRFS="`echo ${OS} | cut -d ':' -f 5`" if [ "x$BTRFS" = "xbtrfs" ]; then BTRFSuuid="`echo ${OS} | cut -d ':' -f 6`" @@ -134,6 +146,12 @@ EOF save_default_entry | grub_add_tab prepare_grub_to_access_device ${DEVICE} | grub_add_tab + if [ x"`${grub_probe} --device ${DEVICE} --target=partmap`" = xmsdos ]; then + cat << EOF + parttool \${root} hidden- +EOF + fi + case ${LONGNAME} in Windows\ Vista*|Windows\ 7*|Windows\ Server\ 2008*) ;; @@ -173,7 +191,7 @@ EOF fi prepare_boot_cache= boot_device_id= - is_first_entry=true + is_top_level=true title_correction_code= OS="${LONGNAME}" @@ -209,7 +227,7 @@ EOF prepare_boot_cache="$(prepare_grub_to_access_device ${LBOOT} | grub_add_tab)" fi - if [ "x$is_first_entry" = xtrue ]; then + if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then cat << EOF menuentry '$(echo "$OS $onstr" | grub_quote)' --class gnu-linux --class gnu --class os \$menuentry_id_option 'osprober-gnulinux-simple-$boot_device_id' { EOF @@ -227,7 +245,7 @@ EOF } EOF echo "submenu '$(gettext_printf "Advanced options for %s" "${OS} $onstr" | grub_quote)' \$menuentry_id_option 'osprober-gnulinux-advanced-$boot_device_id' {" - is_first_entry=false + is_top_level=false fi title="${LLABEL} $onstr" cat << EOF @@ -253,13 +271,13 @@ EOF grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")" fi done - if [ x"$is_first_entry" != xtrue ]; then + if [ x"$is_top_level" != xtrue ]; then echo '}' fi echo "$title_correction_code" ;; macosx) - OSXUUID="`${grub_probe} --target=fs_uuid --device ${DEVICE} 2> /dev/null`" + OSXUUID="${UUID}" osx_entry xnu_kernel 32 osx_entry xnu_kernel64 64 ;; @@ -287,6 +305,17 @@ EOF '\$(task-create)' '\$(task-resume)' module /lib/ld.so.1 exec /hurd/exec '\$(exec-task=task-create)' } +EOF + ;; + minix) + cat << EOF +menuentry "${LONGNAME} (on ${DEVICE}, Multiboot)" { +EOF + save_default_entry | sed -e "s/^/\t/" + prepare_grub_to_access_device ${DEVICE} | sed -e "s/^/\t/" + cat << EOF + multiboot /boot/image_latest +} EOF ;; *) diff --git a/gshadow b/gshadow index 7886d945..ced083f9 100644 --- a/gshadow +++ b/gshadow @@ -73,3 +73,8 @@ geoclue:!:: samba:!:: davfs2:!:: dhcp:!:: +input:!:: +systemd-bus-proxy:!:: +systemd-network:!:: +systemd-resolve:!:: +systemd-timesync:!:: diff --git a/gshadow- b/gshadow- index 2ea50900..2527ca8d 100644 --- a/gshadow- +++ b/gshadow- @@ -72,3 +72,8 @@ colord:!:: geoclue:!:: samba:!:: davfs2:!:: +dhcp:!:: +input:!:: +systemd-bus-proxy:!:: +systemd-network:!:: +systemd-resolve:!:: diff --git a/hotplug/usb/libsane.usermap b/hotplug/usb/libsane.usermap index 91b3daab..4f731bda 100644 --- a/hotplug/usb/libsane.usermap +++ b/hotplug/usb/libsane.usermap @@ -1,5 +1,5 @@ # This file was automatically created based on description files (*.desc) -# by sane-desc 3.5 from sane-backends 1.0.24 on Tue Jul 8 08:24:50 2014 +# by sane-desc 3.5 from sane-backends 1.0.24 on Mon Nov 24 08:13:36 2014 # # The entries below are used to detect a USB device and change owner # and permissions on the "device node" used by libusb. diff --git a/init.d/alsasound b/init.d/alsasound index e3c8dd90..2eddfd30 100755 --- a/init.d/alsasound +++ b/init.d/alsasound @@ -1,10 +1,11 @@ #!/sbin/runscript -# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsasound.initd-r5,v 1.1 2012/02/20 09:03:53 chainsaw Exp $ -# Copyright 1999-2012 Gentoo Foundation +# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsasound.initd-r6,v 1.1 2014/06/23 21:34:42 ssuominen Exp $ +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 alsastatedir=/var/lib/alsa alsascrdir=/etc/alsa.d +alsahomedir=/var/run/alsasound extra_commands="save restore" @@ -16,6 +17,8 @@ depend() { restore() { ebegin "Restoring Mixer Levels" + checkpath -q -d -m 0700 -o root:root ${alsahomedir} || return 1 + if [ ! -r "${alsastatedir}/asound.state" ] ; then ewarn "No mixer config in ${alsastatedir}/asound.state, you have to unmute your card!" eend 0 @@ -29,7 +32,7 @@ restore() { [ -e /dev/snd/controlC${cardnum} ] || sleep 2 [ -e /dev/snd/controlC${cardnum} ] || sleep 2 [ -e /dev/snd/controlC${cardnum} ] || sleep 2 - alsactl -I -f "${alsastatedir}/asound.state" restore ${cardnum} \ + alsactl -E HOME="${alsahomedir}" -I -f "${alsastatedir}/asound.state" restore ${cardnum} \ || ewarn "Errors while restoring defaults, ignoring" done @@ -49,8 +52,10 @@ restore() { save() { ebegin "Storing ALSA Mixer Levels" + checkpath -q -d -m 0700 -o root:root ${alsahomedir} || return 1 + mkdir -p "${alsastatedir}" - if ! alsactl -f "${alsastatedir}/asound.state" store; then + if ! alsactl -E HOME="${alsahomedir}" -f "${alsastatedir}/asound.state" store; then eerror "Error saving levels." eend 1 return 1 diff --git a/init.d/apache2 b/init.d/apache2 index 76e2154b..155747f1 100755 --- a/init.d/apache2 +++ b/init.d/apache2 @@ -106,7 +106,7 @@ stop() { ${APACHE2} ${APACHE2_OPTS} -k stop local i=0 retval=0 - while ( test -f "${PIDFILE}" && pgrep -P ${PID} apache2 >/dev/null ) \ + while ( test -f "${PIDFILE}" || pgrep -P ${PID} apache2 >/dev/null ) \ && [ $i -lt ${TIMEOUT} ]; do sleep 1 && i=$(expr $i + 1) done diff --git a/init.d/atd b/init.d/atd index 4d70ae50..6a7a4d1f 100755 --- a/init.d/atd +++ b/init.d/atd @@ -1,7 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-process/at/files/atd.rc7,v 1.1 2013/02/27 13:06:29 polynomial-c Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-process/at/files/atd.rc7,v 1.3 2014/03/03 14:09:19 polynomial-c Exp $ pidfile="/var/run/atd.pid" command="/usr/sbin/atd" diff --git a/init.d/courier-imapd b/init.d/courier-imapd index 424961b6..4fa50f83 100755 --- a/init.d/courier-imapd +++ b/init.d/courier-imapd @@ -1,7 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2007 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/files/courier-imap-4.0.6-r1-courier-imapd.rc6,v 1.2 2007/04/07 01:08:00 chtekk Exp $ +# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/files/courier-imap-4.0.6-r1-courier-imapd.rc6,v 1.4 2014/11/20 10:25:15 mrueg Exp $ depend() { need net courier-authlib diff --git a/init.d/courier-imapd-ssl b/init.d/courier-imapd-ssl index 94554638..32292a17 100755 --- a/init.d/courier-imapd-ssl +++ b/init.d/courier-imapd-ssl @@ -1,7 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2007 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/files/courier-imap-4.0.6-r1-courier-imapd-ssl.rc6,v 1.2 2007/04/07 01:08:00 chtekk Exp $ +# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/files/courier-imap-4.0.6-r1-courier-imapd-ssl.rc6,v 1.4 2014/11/20 10:25:15 mrueg Exp $ depend() { need net courier-authlib diff --git a/init.d/courier-pop3d b/init.d/courier-pop3d index 821f4a5f..3eb019f8 100755 --- a/init.d/courier-pop3d +++ b/init.d/courier-pop3d @@ -1,7 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2007 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/files/courier-imap-4.0.6-r1-courier-pop3d.rc6,v 1.2 2007/04/07 01:08:00 chtekk Exp $ +# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/files/courier-imap-4.0.6-r1-courier-pop3d.rc6,v 1.4 2014/11/20 10:25:15 mrueg Exp $ depend() { need net courier-authlib diff --git a/init.d/courier-pop3d-ssl b/init.d/courier-pop3d-ssl index 53703afe..c72ac2da 100755 --- a/init.d/courier-pop3d-ssl +++ b/init.d/courier-pop3d-ssl @@ -1,7 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2007 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/files/courier-imap-4.0.6-r1-courier-pop3d-ssl.rc6,v 1.2 2007/04/07 01:08:00 chtekk Exp $ +# $Header: /var/cvsroot/gentoo-x86/net-mail/courier-imap/files/courier-imap-4.0.6-r1-courier-pop3d-ssl.rc6,v 1.4 2014/11/20 10:25:15 mrueg Exp $ depend() { need net courier-authlib diff --git a/init.d/device-mapper b/init.d/device-mapper index 9ac8cdb7..56e75037 100755 --- a/init.d/device-mapper +++ b/init.d/device-mapper @@ -1,7 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/device-mapper.rc-2.02.95-r2,v 1.2 2013/04/09 11:00:26 ssuominen Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/device-mapper.rc-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $ depend() { # As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that @@ -19,19 +19,55 @@ dm_in_proc() { return ${retval} } +# char **build_dmsetup_command(volume) +# +# Returns complete dmsetup command given single volume name +build_dmsetup_command() { + local count dmsetup_cmd + + # Number of lines mentioning volume name + count=$(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | grep -c ${1}) + + # If there's just one line: + if [ ${count} -eq 1 ] ; then + echo "echo $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ + grep ${1} | awk '{$1=""; print $0}') | /sbin/dmsetup create ${1}" + + # For all cases with more lines: + elif [ ${count} -gt 1 ] ; then + for c in $( seq 1 ${count} ) ; do + if [ ${c} -eq 1 ] ; then + # Heavy escaping in awk-statement because we cannot use apostrophes + dmsetup_cmd="echo -e $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ + grep ${1} | awk NR==${c}\ \{\$1=\"\"\;\ print\ \$0\})" + else + # Append starting with newline + dmsetup_cmd="${dmsetup_cmd}\\\\n \ + $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ + grep ${1} | awk NR==${c}\ \{\$1=\"\"\;\ print\ \$0\})" + fi + done + echo "${dmsetup_cmd} | /sbin/dmsetup create ${1}" + fi + + return 0 +} + # char **get_new_dm_volumes(void) # -# Return dmsetup commands to setup volumes +# Return unique volumes from /etc/dmtab get_new_dm_volumes() { - local volume params + local volume # Filter comments and blank lines grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ - while read volume params ; do + awk '{ print $1 }' | \ + uniq | \ + while read volume ; do # If it exists, skip it dmvolume_exists "${volume%:}" && continue - # Assemble the command to run to create volume - echo "echo ${params} | /sbin/dmsetup create ${volume%:}" + + echo "${volume%:}" done return 0 @@ -88,15 +124,15 @@ start() { if [ -x /sbin/dmsetup -a -c /dev/mapper/control -a -f /etc/dmtab ] ; then [ -n "$(get_new_dm_volumes)" ] && \ einfo " Setting up device-mapper volumes:" - + get_new_dm_volumes | \ while read x ; do [ -n "${x}" ] || continue - + volume="${x##* }" - + ebegin " Creating volume: ${volume}" - if ! eval "${x}" >/dev/null 2>/dev/null ; then + if ! eval $(build_dmsetup_command ${volume}) >/dev/null 2>/dev/null ; then eend 1 " Error creating volume: ${volume}" # dmsetup still adds an empty volume in some cases, # so lets remove it diff --git a/init.d/dmeventd b/init.d/dmeventd index cad661d2..3c2f5f32 100755 --- a/init.d/dmeventd +++ b/init.d/dmeventd @@ -1,7 +1,10 @@ #!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1,v 1.2 2013/04/09 11:00:26 ssuominen Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1,v 1.3 2014/02/08 21:17:46 robbat2 Exp $ + +PIDFILE=/run/dmeventd.pid +BIN=/sbin/dmeventd depend() { # As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that @@ -11,13 +14,13 @@ depend() { start() { ebegin "Starting dmeventd" - start-stop-daemon --start --exec /sbin/dmeventd --pidfile /var/run/dmeventd.pid + start-stop-daemon --start --exec $BIN --pidfile $PIDFILE eend $? } stop() { ebegin "Stopping dmeventd" - start-stop-daemon --stop --exec /sbin/dmeventd --pidfile /var/run/dmeventd.pid + start-stop-daemon --stop --exec $BIN --pidfile $PIDFILE eend $? } diff --git a/init.d/dropbox b/init.d/dropbox index 7bba8943..c15e368a 100755 --- a/init.d/dropbox +++ b/init.d/dropbox @@ -1,9 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo-x86/net-misc/dropbox/files/dropbox.initd,v 1.3 2014/03/04 20:42:02 naota Exp $ - -PID_DIR=/var/run/dropbox +# $Header: /var/cvsroot/gentoo-x86/net-misc/dropbox/files/dropbox.initd,v 1.5 2014/10/18 02:09:07 naota Exp $ depend() { need localmount net @@ -15,15 +13,15 @@ start() { local tmpionice="${IONICE:+"--ionice "}${IONICE}" local started="" - mkdir -p ${PID_DIR} - ebegin "Starting dropbox" for dbuser in ${DROPBOX_USERS}; do local homedir=$(eval echo ~${dbuser}) if test -d "${homedir}" && \ + echo 0 > ${homedir}/.dropbox/dropbox.pid && \ start-stop-daemon -S -b \ ${tmpnice} ${tmpionice} \ -u ${dbuser} -v \ + -p ${homedir}/.dropbox/dropbox.pid \ -e HOME=${homedir} \ -x /opt/bin/dropbox; then started="${started} ${dbuser}" @@ -58,7 +56,8 @@ stop() { status() { for dbuser in ${DROPBOX_USERS}; do - if [ -e ${PID_DIR}/${dbuser}.pid ] ; then + local homedir=$(eval echo ~${dbuser}) + if [ -e ${homedir}/.dropbox/dropbox.pid ] ; then echo "dropboxd for USER $dbuser: running." else echo "dropboxd for USER $dbuser: not running." diff --git a/init.d/g15daemon b/init.d/g15daemon index 203f42b9..4ea22a0c 100755 --- a/init.d/g15daemon +++ b/init.d/g15daemon @@ -1,14 +1,14 @@ #!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/files/g15daemon-1.9.5.3.initd,v 1.2 2013/03/18 17:49:55 polynomial-c Exp $ +# $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/files/g15daemon-1.9.5.3.initd,v 1.3 2014/08/03 11:23:31 polynomial-c Exp $ # Init script for g15daemon pidfile="/var/run/g15daemon.pid" command="/usr/sbin/g15daemon" +start_stop_daemon_args="--wait 30" command_args="" -start_stop_daemon_args="--background --pidfile ${pidfile}" depend() { after hotplug @@ -22,13 +22,14 @@ start_pre() { if [ ! -e "/dev/input/uinput" ] && [ ! -e "/dev/uinput" ] ; then # We can load modules, but uinput device does not exist einfo "Loading uinput module" - /sbin/modprobe uinput > /dev/null 2> /dev/null + /sbin/modprobe uinput > /dev/null 2> /dev/null \ + || return 1 fi fi - local SWITCHKEY="" - [ "${CLIENT_SWITCH_L1}" = "yes" ] && command_args="--switch" - return 0 + if [ "${CLIENT_SWITCH_L1}" = "yes" ] ; then + command_args="--switch" + fi } stop() { @@ -37,6 +38,9 @@ stop() { if [ $BACKLIGHT_OFF = "yes" ]; then KILLOPT="-K" fi - start-stop-daemon -R 5 --exec ${command} -- ${KILLOPT} + while [ -f "${pidfile}" ] && kill -0 $(cat ${pidfile}) ; do + ${command} ${KILLOPT} + sleep 1 + done eend $? } diff --git a/init.d/kmod-static-nodes b/init.d/kmod-static-nodes index 43d84311..dcbf6793 100755 --- a/init.d/kmod-static-nodes +++ b/init.d/kmod-static-nodes @@ -1,13 +1,14 @@ #!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-apps/kmod/files/kmod-static-nodes,v 1.1 2013/08/09 19:08:18 ssuominen Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-apps/kmod/files/kmod-static-nodes-r1,v 1.1 2014/07/11 12:28:07 ssuominen Exp $ description="Create list of required static device nodes for the current kernel" depend() { after dev-mount before tmpfiles.dev dev + keyword -lxc } start() { diff --git a/init.d/lvm b/init.d/lvm index 76d90f33..7fdf50e1 100755 --- a/init.d/lvm +++ b/init.d/lvm @@ -1,12 +1,12 @@ #!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm.rc-2.02.95-r2,v 1.2 2013/04/09 11:00:26 ssuominen Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm.rc-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $ depend() { - use dmeventd before checkfs fsck - after dmeventd modules device-mapper + after modules device-mapper + need lvmetad sysfs } config='global { locking_dir = "/run/lock/lvm" }' @@ -73,7 +73,7 @@ then einfo "Shutting down the Logical Volume Manager" - VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings --nosuffix 2> /dev/null) + VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings --nosuffix --rows 2> /dev/null) if [ "$VGS" ] then @@ -83,13 +83,14 @@ then # Extra PV find pass because some devices might not have been available until very recently lvm_commands="${lvm_commands}lvchange --sysinit -a ln ${VGS}\n" # Now make the nodes - lvm_commands="${lvm_commands}vgchange --sysinit -a ln\n" + lvm_commands="${lvm_commands}vgchange --sysinit -a ln ${VGS}\n" # Order of this is important, have to work around dash and LVM readline printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null - eend $? "Failed" + eend $? "Failed (possibly some LVs still needed for /usr or root)" fi - einfo "Finished Shutting down the Logical Volume Manager" + einfo "Finished shutting down the Logical Volume Manager" + return 0 fi } diff --git a/init.d/lvm-monitoring b/init.d/lvm-monitoring index 6a41bb60..c53a6046 100755 --- a/init.d/lvm-monitoring +++ b/init.d/lvm-monitoring @@ -1,7 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm-monitoring.initd-2.02.67-r2,v 1.4 2013/04/09 11:00:26 ssuominen Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm-monitoring.initd-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $ # This script is based on upstream file # LVM2.2.02.67/scripts/lvm2_monitoring_init_red_hat.in @@ -18,29 +18,22 @@ VGS=/sbin/vgs start() { ret=0 # TODO do we want to separate out already active groups only? - VGSLIST=`$VGS --noheadings -o name 2> /dev/null` - for vg in $VGSLIST - do - ebegin "Starting LVM monitoring for VG $vg:" - $VGCHANGE --monitor y --poll y $vg - ret2=$? - eend $ret2 - [ $ret2 -ne 0 ] && ret=$ret2 - done + VGSLIST=`$VGS --noheadings -o name --rows 2> /dev/null` + ebegin "Starting LVM monitoring for VGs ${VGSLIST}:" + $VGCHANGE --monitor y --poll y ${VGSLIST} + ret=$? + eend $ret return $ret + } stop() { ret=0 # TODO do we want to separate out already active groups only? - VGSLIST=`$VGS --noheadings -o name 2> /dev/null` - for vg in $VGSLIST - do - ebegin "Stopping LVM monitoring for VG $vg:" - $VGCHANGE --monitor n $vg - ret2=$? - eend $ret2 - [ $ret2 -ne 0 ] && ret=$ret2 - done + VGSLIST=`$VGS --noheadings -o name --rows 2> /dev/null` + ebegin "Stopping LVM monitoring for VGs ${VGSLIST}:" + $VGCHANGE --monitor n ${VGSLIST} + ret=$? + eend $ret return $ret } diff --git a/init.d/lvmetad b/init.d/lvmetad new file mode 100755 index 00000000..e16d55c4 --- /dev/null +++ b/init.d/lvmetad @@ -0,0 +1,13 @@ +#!/sbin/runscript +# Copyright 1999-2014 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvmetad.initd-2.02.105-r2,v 1.2 2014/02/08 21:17:46 robbat2 Exp $ + +pidfile="/run/lvmetad.pid" +command="/sbin/lvmetad" +command_args="${LVMETAD_OPTS:=-p ${pidfile}}" +start_stop_daemon_args="--pidfile ${pidfile}" + +depend() { + : +} diff --git a/init.d/mysql b/init.d/mysql index 511a6bfd..2d057458 100755 --- a/init.d/mysql +++ b/init.d/mysql @@ -1,7 +1,9 @@ #!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql-init-scripts/files/mysql-5.1.67-init.d,v 1.1 2013/01/18 01:51:47 robbat2 Exp $ +# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql-init-scripts/files/init.d-2.0,v 1.3 2014/09/23 01:23:27 grknight Exp $ + +extra_commands="checkconfig" depend() { use net.lo @@ -36,6 +38,9 @@ start() { return 1 fi + # Check the config or die + checkconfig || return 1 + # Now we can startup ebegin "Starting $(mysql_svcname)" @@ -51,6 +56,12 @@ start() { local datadir=$(get_config "${MY_CNF}" datadir | tail -n1) local pidfile=$(get_config "${MY_CNF}" pid-file | tail -n1) local socket=$(get_config "${MY_CNF}" socket | tail -n1) + local chroot=$(get_config "${MY_CNF}" chroot | tail -n1) + + if [ -n "${chroot}" ] ; then + socket="${chroot}/${socket}" + pidfile="${chroot}/${pidfile}" + fi if [ ! -d "${datadir}" ] ; then eerror "MySQL datadir \`${datadir}' is empty or invalid" @@ -59,8 +70,15 @@ start() { fi if [ ! -d "${datadir}"/mysql ] ; then - eerror "You don't appear to have the mysql database installed yet." - eerror "Please run /usr/bin/mysql_install_db to have this done..." + # find which package is installed to report an error + local EROOT=$(portageq envvar EROOT) + local DBPKG_P=$(portageq match ${EROOT} $(portageq expand_virtual ${EROOT} virtual/mysql)) + if [ -z ${DBPKG_P} ] ; then + eerror "You don't appear to have a server package installed yet." + else + eerror "You don't appear to have the mysql database installed yet." + eerror "Please run \`emerge --config =${DBPKG_P}\` to have this done..." + fi return 1 fi @@ -114,5 +132,29 @@ stop() { --retry ${stop_timeout} eend $? } + +checkconfig() { + local my_cnf="${MY_CNF:-/etc/${SVCNAME}/my.cnf}" + local basedir=$(get_config "${my_cnf}" basedir | tail -n1) + local svc_name=$(mysql_svcname) + ebegin "Checking mysqld configuration for ${svc_name}" + + if [ ${RC_CMD} = "checkconfig" ] ; then + # We are calling checkconfig specifically. Print warnings regardless. + "${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null + else + # Suppress output to check the return value + "${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null 2>&1 + + # If the above command does not return 0, + # then there is an error to echo to the user + if [ $? -ne 0 ] ; then + "${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null + fi + fi + + eend $? "${svc_name} config check failed" +} + # vim: filetype=gentoo-init-d sw=2 ts=2 sts=2 noet: diff --git a/init.d/named b/init.d/named index ee209d63..7f495532 100755 --- a/init.d/named +++ b/init.d/named @@ -1,7 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2012 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/net-dns/bind/files/named.init-r12,v 1.1 2012/08/24 19:01:09 idl0r Exp $ +# $Header: /var/cvsroot/gentoo-x86/net-dns/bind/files/named.init-r13,v 1.1 2014/01/31 21:24:49 idl0r Exp $ extra_commands="checkconfig checkzones" extra_started_commands="reload" @@ -67,14 +67,14 @@ _get_pidfile() { # as suggested in bug #107724, bug 335398#c17 [ -n "${PIDFILE}" ] || PIDFILE=${CHROOT}$(\ /usr/sbin/named-checkconf -p ${CHROOT:+-t} ${CHROOT} ${NAMED_CONF#${CHROOT}} | grep 'pid-file' | cut -d\" -f2) - [ -z "${PIDFILE}" ] && PIDFILE=${CHROOT}/var/run/named/named.pid + [ -z "${PIDFILE}" ] && PIDFILE=${CHROOT}/run/named/named.pid } check_chroot() { if [ -n "${CHROOT}" ]; then [ ! -d "${CHROOT}" ] && return 1 [ ! -d "${CHROOT}/dev" ] || [ ! -d "${CHROOT}/etc" ] || [ ! -d "${CHROOT}/var" ] && return 1 - [ ! -d "${CHROOT}/var/run" ] || [ ! -d "${CHROOT}/var/log" ] && return 1 + [ ! -d "${CHROOT}/run" ] || [ ! -d "${CHROOT}/var/log" ] && return 1 [ ! -d "${CHROOT}/etc/bind" ] || [ ! -d "${CHROOT}/var/bind" ] && return 1 [ ! -d "${CHROOT}/var/log/named" ] && return 1 [ ! -c "${CHROOT}/dev/null" ] || [ ! -c "${CHROOT}/dev/zero" ] && return 1 @@ -156,7 +156,7 @@ start() { checkconfig || { eend 1; return 1; } - # create piddir (usually /var/run/named) if necessary, bug 334535 + # create piddir (usually /run/named) if necessary, bug 334535 _get_pidfile piddir="${PIDFILE%/*}" checkpath -q -d -o root:named -m 0770 "${piddir}" || { diff --git a/init.d/postgresql-9.3 b/init.d/postgresql-9.3 deleted file mode 100755 index b82cc3b8..00000000 --- a/init.d/postgresql-9.3 +++ /dev/null @@ -1,138 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: $ - -extra_started_commands="reload" - -get_config() { - [ -f ${PGDATA%/}/postgresql.conf ] || return 1 - - eval echo $(sed -e 's:#.*::' ${PGDATA%/}/postgresql.conf \ - | awk '$1 == "'$1'" { print ($2 == "=" ? $3 : $2) }') -} - -depend() { - use net - provide postgresql - - if [ "$(get_config log_destination)" = "syslog" ]; then - use logger - fi -} - -configured_port=$(get_config port) -: ${configured_port:=${PGPORT}} -socket_path=$(get_config unix_socket_directory) -: ${socket_path:=/run/postgresql} - -checkconfig() { - # Check that DATA_DIR has been set - if [ -z ${DATA_DIR} ] ; then - eerror "DATA_DIR not set" - eerror "HINT: Perhaps you need to update /etc/conf.d/postgresql-9.3" - return 1 - fi - - # Check that DATA_DIR exists - if [ ! -d ${DATA_DIR} ] ; then - eerror "Directory not found: ${DATA_DIR}" - eerror "HINT: Ensure that DATA_DIR points to the right path." - eerror "HINT: Or perhaps you need to create the database cluster:" - eerror " emerge --config dev-db/postgresql-server:9.3" - return 1 - fi - - # Check for the existence of PostgreSQL's config files, and set the - # proper mode and ownership. - # Only three files should be checked as potentially other files - # may be in PGDATA that should not be touched. - local file - for file in postgresql pg_hba pg_ident ; do - file="${PGDATA%/}/${file}.conf" - if [ -f ${file} ] ; then - checkpath -f -m 0600 -o postgres:postgres ${file} - else - eerror "${file} not found" - eerror "HINT: mv ${DATA_DIR%/}/*.conf ${PGDATA}" - return 1 - fi - done - - # Set the proper permission for the socket path and create it if - # it doesn't exist. - checkpath -d -m 0775 -o postgres:postgres ${socket_path} - if [ -e ${socket_path%/}/.s.PGSQL.${configured_port} ] ; then - eerror "Socket conflict." - eerror "A server is already listening on:" - eerror " ${socket_path%/}/.s.PGSQL.${configured_port}" - eerror "HINT: Change PGPORT to listen on a different socket." - return 1 - fi -} - -start() { - checkconfig || return 1 - - ebegin "Starting PostgreSQL" - - rm -f ${DATA_DIR%/}/postmaster.pid - - local extraenv - local x - for x in ${PG_EXTRA_ENV} ; do - extraenv="${extraenv} --env ${x}" - done - - start-stop-daemon --start \ - --user postgres \ - --env "PGPORT=${configured_port}" \ - ${extraenv} \ - --pidfile ${DATA_DIR%/}/postmaster.pid \ - --exec /usr/lib/postgresql-9.3/bin/pg_ctl \ - -- start -s -w -t ${START_TIMEOUT} -l ${DATA_DIR%/}/postmaster.log \ - -D ${PGDATA} -o "--data-directory=${DATA_DIR} ${PGOPTS}" - local retval=$? - - if [ $retval -ne 0 ] ; then - eerror "Check the log for a possible explanation of the above error. The log may be" - eerror " ${DATA_DIR%/}/postmaster.log" - eerror "Or wherever you configured PostgreSQL 9.3 log messages to be sent." - eend $retval - return $retval - fi - - eend $retval -} - -stop() { - local seconds=$(( ${NICE_TIMEOUT} + ${RUDE_TIMEOUT} + ${FORCE_TIMEOUT} )) - ebegin "Stopping PostgreSQL (this can take up to ${seconds} seconds)" - - local retval - local retries=SIGTERM/${NICE_TIMEOUT} - - if [ "${RUDE_QUIT}" != "NO" ] ; then - einfo "RUDE_QUIT enabled." - retries="${retries}/SIGINT/${RUDE_TIMEOUT}" - fi - if [ "${FORCE_QUIT}" = "YES" ] ; then - einfo "FORCE_QUIT enabled." - ewarn "A recover-run might be executed on next startup." - retries="${retries}/SIGQUIT/${FORCE_TIMEOUT}" - fi - - # Loops through nice, rude, and force quit in one go. - start-stop-daemon --stop \ - --exec /usr/lib/postgresql-9.3/bin/postgres \ - --retry ${retries} \ - --pidfile ${DATA_DIR%/}/postmaster.pid - - eend -} - -reload() { - ebegin "Reloading PostgreSQL configuration" - kill -HUP $(head -n1 ${DATA_DIR%/}/postmaster.pid) - eend $? -} diff --git a/init.d/pydoc-2.7 b/init.d/pydoc-2.7 index 6f901a1b..79c23742 100755 --- a/init.d/pydoc-2.7 +++ b/init.d/pydoc-2.7 @@ -1,11 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2011 Gentoo Technologies, Inc. +# Copyright 1999-2014 Gentoo Technologies, Inc. # Distributed under the terms of the GNU General Public Licence v2 -# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.init,v 1.4 2011/10/27 13:56:55 neurogeek Exp $ - -depend() { - need net -} +# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.init,v 1.5 2014/10/12 12:37:07 djc Exp $ start() { local pydoc_port="${PYDOC2_7_PORT-${PYDOC_PORT}}" diff --git a/init.d/pydoc-3.3 b/init.d/pydoc-3.3 index fc1676e8..95c40e50 100755 --- a/init.d/pydoc-3.3 +++ b/init.d/pydoc-3.3 @@ -1,11 +1,7 @@ #!/sbin/runscript -# Copyright 1999-2011 Gentoo Technologies, Inc. +# Copyright 1999-2014 Gentoo Technologies, Inc. # Distributed under the terms of the GNU General Public Licence v2 -# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.init,v 1.4 2011/10/27 13:56:55 neurogeek Exp $ - -depend() { - need net -} +# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.init,v 1.5 2014/10/12 12:37:07 djc Exp $ start() { local pydoc_port="${PYDOC3_3_PORT-${PYDOC_PORT}}" diff --git a/init.d/pydoc-3.4 b/init.d/pydoc-3.4 new file mode 100755 index 00000000..0b51442e --- /dev/null +++ b/init.d/pydoc-3.4 @@ -0,0 +1,25 @@ +#!/sbin/runscript +# Copyright 1999-2014 Gentoo Technologies, Inc. +# Distributed under the terms of the GNU General Public Licence v2 +# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.init,v 1.5 2014/10/12 12:37:07 djc Exp $ + +start() { + local pydoc_port="${PYDOC3_4_PORT-${PYDOC_PORT}}" + + if [ -z "${pydoc_port}" ]; then + eerror "Port not set" + return 1 + fi + + ebegin "Starting pydoc server on port ${pydoc_port}" + start-stop-daemon --start --background --make-pidfile \ + --pidfile /var/run/pydoc3.4.pid \ + --exec /usr/bin/pydoc3.4 -- -p "${pydoc_port}" + eend $? +} + +stop() { + ebegin "Stopping pydoc server" + start-stop-daemon --stop --quiet --pidfile /var/run/pydoc3.4.pid + eend $? +} diff --git a/init.d/rfcomm b/init.d/rfcomm new file mode 100755 index 00000000..c5640555 --- /dev/null +++ b/init.d/rfcomm @@ -0,0 +1,35 @@ +#!/sbin/runscript +# Copyright 1999-2014 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/net-wireless/bluez/files/rfcomm-init.d-r2,v 1.1 2014/06/26 17:18:43 alonbl Exp $ + +depend() { + need bluetooth +} + +checkconfig() { + if [ -z "${ADDRESS}" ]; then + eerror "ADDRESS must be set" + return 1 + fi + + return 0 +} + +start() { + local DEVICE=${RC_SVCNAME#*.} + + checkconfig || return 1 + + ebegin "Starting ${RC_SVCNAME}" + rfcomm bind "${DEVICE}" "${ADDRESS}" ${CHANNEL} + eend $? +} + +stop() { + local DEVICE=${RC_SVCNAME#*.} + + ebegin "Shutting down ${RC_SVCNAME}" + rfcomm release "${DEVICE}" + eend $? +} diff --git a/init.d/smartd b/init.d/smartd index 131a7d45..d6273e6b 100755 --- a/init.d/smartd +++ b/init.d/smartd @@ -1,16 +1,19 @@ #!/sbin/runscript -# Copyright 1999-2011 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-apps/smartmontools/files/smartd.rc,v 1.9 2011/09/15 07:58:50 polynomial-c Exp $ +# $Header: /var/cvsroot/gentoo-x86/sys-apps/smartmontools/files/smartd-r1.rc,v 1.1 2014/08/09 09:36:30 polynomial-c Exp $ + +pidfile="/run/smartd.pid" +command="/usr/sbin/smartd" +command_args="-p ${pidfile} ${SMARTD_OPTS}" +extra_started_commands="reload" depend() { need localmount after bootmisc } -extra_started_commands="reload" - -checkconfig() { +start_pre() { if [ ! -f "/etc/smartd.conf" ] ; then eerror "You should setup your /etc/smartd.conf file!" eerror "See the smartd.conf(5) manpage." @@ -19,25 +22,8 @@ checkconfig() { return 0 } -start() { - checkconfig || return 1 - - ebegin "Starting S.M.A.R.T. monitoring daemon" - start-stop-daemon --start --exec /usr/sbin/smartd \ - --pidfile /var/run/smartd.pid \ - -- -p /var/run/smartd.pid ${SMARTD_OPTS} - eend $? -} - -stop() { - ebegin "Stopping S.M.A.R.T. monitoring daemon" - start-stop-daemon --stop --exec /usr/sbin/smartd \ - --pidfile /var/run/smartd.pid - eend $? -} - reload() { ebegin "Reloading configuration" - start-stop-daemon --signal HUP --pidfile /var/run/smartd.pid smartd + start-stop-daemon --signal HUP --pidfile ${pidfile} ${command##*/} eend $? } diff --git a/init.d/ulogd b/init.d/ulogd index 9206f8de..b1c5d616 100755 --- a/init.d/ulogd +++ b/init.d/ulogd @@ -1,25 +1,23 @@ #!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation +# Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/app-admin/ulogd/files/ulogd-2.init,v 1.1 2013/03/20 08:38:18 pinkbyte Exp $ +# $Header: /var/cvsroot/gentoo-x86/app-admin/ulogd/files/ulogd-2-ng.init,v 1.2 2014/08/22 10:31:59 dlan Exp $ ULOGD_PIDFILE="/run/ulogd.pid" -ULOGD_EXEC="/usr/sbin/ulogd" -ULOGD_OPTS="-u ulogd" +ULOGD_BINARY="/usr/sbin/ulogd" +ULOGD_OPTS="--daemon --uid ulogd --pidfile ${ULOGD_PIDFILE}" extra_started_commands="reload reopen_logs" depend() { - need net + before iptables ip6tables ebtables firewall + after mysql postgresql } start() { ebegin "Starting ${SVCNAME}" - start-stop-daemon --start --quiet \ - --make-pidfile \ - --pidfile ${ULOGD_PIDFILE} \ - --background \ - --exec ${ULOGD_EXEC} \ + start-stop-daemon --start \ + --exec ${ULOGD_BINARY} --pidfile ${ULOGD_PIDFILE} \ -- ${ULOGD_OPTS} eend $? } diff --git a/kernel-config/config-3.16.5-gentoo-00 b/kernel-config/config-3.16.5-gentoo-00 new file mode 100644 index 00000000..2ec15ce9 --- /dev/null +++ b/kernel-config/config-3.16.5-gentoo-00 @@ -0,0 +1,5715 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/x86 3.16.5-gentoo Kernel Configuration +# + +# +# Gentoo Linux +# +CONFIG_GENTOO_LINUX=y +CONFIG_GENTOO_LINUX_UDEV=y + +# +# Support for init systems, system and service managers +# +CONFIG_GENTOO_LINUX_INIT_SCRIPT=y +CONFIG_GENTOO_LINUX_INIT_SYSTEMD=y +CONFIG_64BIT=y +CONFIG_X86_64=y +CONFIG_X86=y +CONFIG_INSTRUCTION_DECODER=y +CONFIG_OUTPUT_FORMAT="elf64-x86-64" +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_MMU=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ZONE_DMA32=y +CONFIG_AUDIT_ARCH=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_HAVE_INTEL_TXT=y +CONFIG_X86_64_SMP=y +CONFIG_X86_HT=y +CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_XZ is not set +# CONFIG_KERNEL_LZO is not set +# CONFIG_KERNEL_LZ4 is not set +CONFIG_DEFAULT_HOSTNAME="bruni" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_FHANDLE=y +CONFIG_USELIB=y +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_IRQ_DOMAIN=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y +CONFIG_GENERIC_CMOS_UPDATE=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_RCU_USER_QS is not set +CONFIG_RCU_FANOUT=64 +CONFIG_RCU_FANOUT_LEAF=16 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_RCU_FAST_NO_HZ is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_NOCB_CPU is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=21 +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_ARCH_SUPPORTS_INT128=y +CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y +# CONFIG_NUMA_BALANCING is not set +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_MEMCG_KMEM=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +# CONFIG_CHECKPOINT_RESTORE is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +# CONFIG_SCHED_AUTOGROUP is not set +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_HAVE_PCSPKR_PLATFORM=y +# CONFIG_EXPERT is not set +CONFIG_UID16=y +CONFIG_SGETMASK_SYSCALL=y +CONFIG_SYSFS_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_PCI_QUIRKS=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SLUB_CPU_PARTIAL=y +# CONFIG_SYSTEM_TRUSTED_KEYRING is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_OPROFILE_NMI_TIMER=y +CONFIG_KPROBES=y +# CONFIG_JUMP_LABEL is not set +CONFIG_OPTPROBES=y +CONFIG_UPROBES=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_KRETPROBES=y +CONFIG_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_KPROBES_ON_FTRACE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y +CONFIG_HAVE_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_PERF_EVENTS_NMI=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR is not set +CONFIG_CC_STACKPROTECTOR_NONE=y +# CONFIG_CC_STACKPROTECTOR_REGULAR is not set +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_SOFT_DIRTY=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_THROTTLING=y +# CONFIG_BLK_CMDLINE_PARSER is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +CONFIG_ACORN_PARTITION=y +CONFIG_ACORN_PARTITION_CUMANA=y +CONFIG_ACORN_PARTITION_EESOX=y +CONFIG_ACORN_PARTITION_ICS=y +CONFIG_ACORN_PARTITION_ADFS=y +CONFIG_ACORN_PARTITION_POWERTEC=y +CONFIG_ACORN_PARTITION_RISCIX=y +CONFIG_AIX_PARTITION=y +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +CONFIG_LDM_DEBUG=y +CONFIG_SGI_PARTITION=y +CONFIG_ULTRIX_PARTITION=y +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_SYSV68_PARTITION=y +# CONFIG_CMDLINE_PARTITION is not set +CONFIG_BLOCK_COMPAT=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_CFQ_GROUP_IOSCHED=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_PADATA=y +CONFIG_ASN1=m +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_ARCH_USE_QUEUE_RWLOCK=y +CONFIG_QUEUE_RWLOCK=y +CONFIG_FREEZER=y + +# +# Processor type and features +# +CONFIG_ZONE_DMA=y +CONFIG_SMP=y +CONFIG_X86_X2APIC=y +CONFIG_X86_MPPARSE=y +CONFIG_X86_EXTENDED_PLATFORM=y +# CONFIG_X86_NUMACHIP is not set +# CONFIG_X86_VSMP is not set +# CONFIG_X86_UV is not set +# CONFIG_X86_GOLDFISH is not set +# CONFIG_X86_INTEL_LPSS is not set +CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +# CONFIG_HYPERVISOR_GUEST is not set +CONFIG_NO_BOOTMEM=y +# CONFIG_MEMTEST is not set +CONFIG_MK8=y +# CONFIG_MPSC is not set +# CONFIG_MCORE2 is not set +# CONFIG_MATOM is not set +# CONFIG_GENERIC_CPU is not set +CONFIG_X86_INTERNODE_CACHE_SHIFT=6 +CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG64=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_CPU_SUP_INTEL=y +CONFIG_CPU_SUP_AMD=y +CONFIG_CPU_SUP_CENTAUR=y +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_DMI=y +CONFIG_GART_IOMMU=y +CONFIG_CALGARY_IOMMU=y +CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +# CONFIG_MAXSMP is not set +CONFIG_NR_CPUS=64 +CONFIG_SCHED_SMT=y +CONFIG_SCHED_MC=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y +CONFIG_X86_MCE=y +CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y +CONFIG_X86_MCE_THRESHOLD=y +# CONFIG_X86_MCE_INJECT is not set +CONFIG_X86_THERMAL_VECTOR=y +CONFIG_X86_16BIT=y +CONFIG_X86_ESPFIX64=y +# CONFIG_I8K is not set +CONFIG_MICROCODE=y +CONFIG_MICROCODE_INTEL=y +CONFIG_MICROCODE_AMD=y +CONFIG_MICROCODE_OLD_INTERFACE=y +CONFIG_MICROCODE_INTEL_EARLY=y +CONFIG_MICROCODE_AMD_EARLY=y +CONFIG_MICROCODE_EARLY=y +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_DIRECT_GBPAGES=y +CONFIG_NUMA=y +CONFIG_AMD_NUMA=y +CONFIG_X86_64_ACPI_NUMA=y +CONFIG_NODES_SPAN_OTHER_NODES=y +# CONFIG_NUMA_EMU is not set +CONFIG_NODES_SHIFT=6 +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_MOVABLE_NODE is not set +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y +# CONFIG_COMPACTION is not set +CONFIG_MIGRATION=y +CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_NEED_BOUNCE_POOL=y +CONFIG_VIRT_TO_BUS=y +CONFIG_MMU_NOTIFIER=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +# CONFIG_MEMORY_FAILURE is not set +# CONFIG_TRANSPARENT_HUGEPAGE is not set +# CONFIG_CLEANCACHE is not set +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_ZBUD is not set +# CONFIG_ZSWAP is not set +# CONFIG_ZSMALLOC is not set +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_X86_CHECK_BIOS_CORRUPTION=y +CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y +CONFIG_X86_RESERVE_LOW=64 +CONFIG_MTRR=y +# CONFIG_MTRR_SANITIZER is not set +CONFIG_X86_PAT=y +CONFIG_ARCH_USES_PG_UNCACHED=y +CONFIG_ARCH_RANDOM=y +CONFIG_X86_SMAP=y +CONFIG_EFI=y +# CONFIG_EFI_STUB is not set +CONFIG_SECCOMP=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +# CONFIG_KEXEC_JUMP is not set +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +# CONFIG_RANDOMIZE_BASE is not set +CONFIG_PHYSICAL_ALIGN=0x1000000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set +# CONFIG_DEBUG_HOTPLUG_CPU0 is not set +# CONFIG_COMPAT_VDSO is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_USE_PERCPU_NUMA_NODE_ID=y + +# +# Power management and ACPI options +# +CONFIG_ARCH_HIBERNATION_HEADER=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATE_CALLBACKS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_AUTOSLEEP=y +CONFIG_PM_WAKELOCKS=y +CONFIG_PM_WAKELOCKS_LIMIT=100 +CONFIG_PM_WAKELOCKS_GC=y +# CONFIG_PM_RUNTIME is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_ADVANCED_DEBUG is not set +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_PM_SLEEP_DEBUG=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_EC_DEBUGFS=m +CONFIG_ACPI_AC=m +CONFIG_ACPI_BATTERY=m +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_VIDEO=m +CONFIG_ACPI_FAN=m +CONFIG_ACPI_DOCK=y +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_IPMI=m +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_PROCESSOR_AGGREGATOR=m +CONFIG_ACPI_THERMAL=m +CONFIG_ACPI_NUMA=y +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_PCI_SLOT=y +CONFIG_X86_PM_TIMER=y +CONFIG_ACPI_CONTAINER=y +# CONFIG_ACPI_SBS is not set +CONFIG_ACPI_HED=y +CONFIG_ACPI_CUSTOM_METHOD=m +CONFIG_ACPI_BGRT=y +# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set +# CONFIG_ACPI_APEI is not set +CONFIG_ACPI_EXTLOG=m +# CONFIG_SFI is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=m +CONFIG_CPU_FREQ_STAT_DETAILS=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=m +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m + +# +# x86 CPU frequency scaling drivers +# +# CONFIG_X86_INTEL_PSTATE is not set +CONFIG_X86_PCC_CPUFREQ=m +CONFIG_X86_ACPI_CPUFREQ=y +CONFIG_X86_ACPI_CPUFREQ_CPB=y +CONFIG_X86_POWERNOW_K8=m +CONFIG_X86_AMD_FREQ_SENSITIVITY=m +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +# CONFIG_X86_P4_CLOCKMOD is not set + +# +# shared options +# +# CONFIG_X86_SPEEDSTEP_LIB is not set + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set +# CONFIG_INTEL_IDLE is not set + +# +# Memory power savings +# +# CONFIG_I7300_IDLE is not set + +# +# Bus options (PCI etc.) +# +CONFIG_PCI=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set +CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCI_MSI=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +CONFIG_PCI_STUB=m +CONFIG_HT_IRQ=y +CONFIG_PCI_ATS=y +CONFIG_PCI_IOV=y +CONFIG_PCI_PRI=y +CONFIG_PCI_PASID=y +CONFIG_PCI_IOAPIC=y +CONFIG_PCI_LABEL=y + +# +# PCI host controller drivers +# +CONFIG_ISA_DMA_API=y +CONFIG_AMD_NB=y +CONFIG_PCCARD=m +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +CONFIG_PD6729=m +CONFIG_I82092=m +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +CONFIG_HOTPLUG_PCI_ACPI_IBM=m +CONFIG_HOTPLUG_PCI_CPCI=y +CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m +CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m +CONFIG_HOTPLUG_PCI_SHPC=m +# CONFIG_RAPIDIO is not set +# CONFIG_X86_SYSFB is not set + +# +# Executable file formats / Emulations +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=y +CONFIG_COREDUMP=y +CONFIG_IA32_EMULATION=y +CONFIG_IA32_AOUT=m +# CONFIG_X86_X32 is not set +CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_KEYS_COMPAT=y +CONFIG_X86_DEV_DMA_OPS=y +CONFIG_IOSF_MBI=m +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM=y +CONFIG_XFRM_ALGO=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IP_TUNNEL=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_ACCT=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CONNTRACK_LABELS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_QUEUE_CT=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_SIP=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NETFILTER_SYNPROXY=m +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_INET=m +CONFIG_NFT_EXTHDR=m +CONFIG_NFT_META=m +CONFIG_NFT_CT=m +CONFIG_NFT_RBTREE=m +CONFIG_NFT_HASH=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_NAT=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_REJECT_INET=m +CONFIG_NFT_COMPAT=m +CONFIG_NETFILTER_XTABLES=y + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NETMAP=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPCOMP=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_L2TP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_NF_TABLES_IPV4=m +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NFT_REJECT_IPV4=m +CONFIG_NF_TABLES_ARP=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT_IPV4=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_NF_TABLES_IPV6=m +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NFT_REJECT_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NFT_BRIDGE_META=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +# CONFIG_NET_DCCPPROBE is not set +CONFIG_IP_SCTP=m +CONFIG_NET_SCTPPROBE=m +# CONFIG_SCTP_DBG_OBJCNT is not set +CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set +CONFIG_SCTP_COOKIE_HMAC_MD5=y +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set +CONFIG_TIPC=m +CONFIG_TIPC_PORTS=8191 +# CONFIG_ATM is not set +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_STP=y +CONFIG_BRIDGE=y +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +CONFIG_NET_DSA=m +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +CONFIG_NET_DSA_TAG_TRAILER=y +CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_VLAN_8021Q_MVRP is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=m +CONFIG_NET_CLS_BPF=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_EMATCH_IPSET=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +CONFIG_OPENVSWITCH=m +CONFIG_OPENVSWITCH_GRE=y +CONFIG_OPENVSWITCH_VXLAN=y +CONFIG_VSOCKETS=m +CONFIG_VMWARE_VMCI_VSOCKETS=m +CONFIG_NETLINK_MMAP=y +CONFIG_NETLINK_DIAG=m +CONFIG_NET_MPLS_GSO=m +CONFIG_HSR=m +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_CGROUP_NET_CLASSID=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +# CONFIG_BPF_JIT is not set +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +CONFIG_NET_TCPPROBE=m +CONFIG_NET_DROP_MONITOR=m +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set +# CONFIG_NFC is not set +CONFIG_HAVE_BPF_JIT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="radeon/R700_rlc.bin radeon/RV730_smc.bin radeon/RV710_uvd.bin" +CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware" +CONFIG_FW_LOADER_USER_HELPER=y +# CONFIG_DEBUG_DRIVER is not set +CONFIG_DEBUG_DEVRES=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_DMA_CMA is not set + +# +# Bus devices +# +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +CONFIG_PARPORT_SERIAL=m +CONFIG_PARPORT_PC_FIFO=y +CONFIG_PARPORT_PC_SUPERIO=y +CONFIG_PARPORT_PC_PCMCIA=m +# CONFIG_PARPORT_GSC is not set +CONFIG_PARPORT_AX88796=m +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_NULL_BLK=m +CONFIG_BLK_DEV_FD=m +CONFIG_PARIDE=m + +# +# Parallel IDE high-level drivers +# +CONFIG_PARIDE_PD=m +CONFIG_PARIDE_PCD=m +CONFIG_PARIDE_PF=m +CONFIG_PARIDE_PT=m +CONFIG_PARIDE_PG=m + +# +# Parallel IDE protocol modules +# +CONFIG_PARIDE_ATEN=m +CONFIG_PARIDE_BPCK=m +CONFIG_PARIDE_COMM=m +CONFIG_PARIDE_DSTR=m +CONFIG_PARIDE_FIT2=m +CONFIG_PARIDE_FIT3=m +CONFIG_PARIDE_EPAT=m +CONFIG_PARIDE_EPATC8=y +CONFIG_PARIDE_EPIA=m +CONFIG_PARIDE_FRIQ=m +CONFIG_PARIDE_FRPW=m +CONFIG_PARIDE_KBIC=m +CONFIG_PARIDE_KTTI=m +CONFIG_PARIDE_ON20=m +CONFIG_PARIDE_ON26=m +CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m +CONFIG_BLK_CPQ_CISS_DA=m +CONFIG_CISS_SCSI_TAPE=y +CONFIG_BLK_DEV_DAC960=m +CONFIG_BLK_DEV_UMEM=m +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m +# CONFIG_DRBD_FAULT_INJECTION is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_NVME=m +CONFIG_BLK_DEV_SKD=m +CONFIG_BLK_DEV_SX8=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_VIRTIO_BLK=m +# CONFIG_BLK_DEV_HD is not set +CONFIG_BLK_DEV_RBD=m +CONFIG_BLK_DEV_RSXX=m + +# +# Misc devices +# +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_AD525X_DPOT is not set +CONFIG_DUMMY_IRQ=m +# CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +CONFIG_TIFM_CORE=m +CONFIG_TIFM_7XX1=m +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_CS5535_MFGPT is not set +# CONFIG_HP_ILO is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1780 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +CONFIG_BMP085=y +CONFIG_BMP085_I2C=m +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_SRAM is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +CONFIG_ALTERA_STAPL=m +CONFIG_INTEL_MEI=m +CONFIG_INTEL_MEI_ME=m +CONFIG_INTEL_MEI_TXE=m +CONFIG_VMWARE_VMCI=m + +# +# Intel MIC Host Driver +# +CONFIG_INTEL_MIC_HOST=m + +# +# Intel MIC Card Driver +# +CONFIG_INTEL_MIC_CARD=m +CONFIG_GENWQE=m +# CONFIG_ECHO is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=m +# CONFIG_SCSI_FC_TGT_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +CONFIG_SCSI_SRP_ATTRS=m +# CONFIG_SCSI_SRP_TGT_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m +CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_SCSI_BNX2X_FCOE=m +CONFIG_BE2ISCSI=m +CONFIG_BLK_DEV_3W_XXXX_RAID=m +CONFIG_SCSI_HPSA=m +CONFIG_SCSI_3W_9XXX=m +CONFIG_SCSI_3W_SAS=m +CONFIG_SCSI_ACARD=m +CONFIG_SCSI_AACRAID=m +CONFIG_SCSI_AIC7XXX=m +CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 +CONFIG_AIC7XXX_RESET_DELAY_MS=5000 +CONFIG_AIC7XXX_DEBUG_ENABLE=y +CONFIG_AIC7XXX_DEBUG_MASK=0 +CONFIG_AIC7XXX_REG_PRETTY_PRINT=y +CONFIG_SCSI_AIC79XX=m +CONFIG_AIC79XX_CMDS_PER_DEVICE=32 +CONFIG_AIC79XX_RESET_DELAY_MS=5000 +CONFIG_AIC79XX_DEBUG_ENABLE=y +CONFIG_AIC79XX_DEBUG_MASK=0 +CONFIG_AIC79XX_REG_PRETTY_PRINT=y +CONFIG_SCSI_AIC94XX=m +CONFIG_AIC94XX_DEBUG=y +CONFIG_SCSI_MVSAS=m +CONFIG_SCSI_MVSAS_DEBUG=y +CONFIG_SCSI_MVSAS_TASKLET=y +CONFIG_SCSI_MVUMI=m +CONFIG_SCSI_DPT_I2O=m +CONFIG_SCSI_ADVANSYS=m +CONFIG_SCSI_ARCMSR=m +CONFIG_SCSI_ESAS2R=m +# CONFIG_MEGARAID_NEWGEN is not set +CONFIG_MEGARAID_LEGACY=m +CONFIG_MEGARAID_SAS=m +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +CONFIG_SCSI_MPT2SAS_LOGGING=y +CONFIG_SCSI_MPT3SAS=m +CONFIG_SCSI_MPT3SAS_MAX_SGE=128 +CONFIG_SCSI_MPT3SAS_LOGGING=y +CONFIG_SCSI_UFSHCD=m +CONFIG_SCSI_UFSHCD_PCI=m +CONFIG_SCSI_UFSHCD_PLATFORM=m +CONFIG_SCSI_HPTIOP=m +CONFIG_SCSI_BUSLOGIC=m +CONFIG_SCSI_FLASHPOINT=y +CONFIG_VMWARE_PVSCSI=m +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +CONFIG_FCOE=m +CONFIG_FCOE_FNIC=m +CONFIG_SCSI_DMX3191D=m +CONFIG_SCSI_EATA=m +CONFIG_SCSI_EATA_TAGGED_QUEUE=y +CONFIG_SCSI_EATA_LINKED_COMMANDS=y +CONFIG_SCSI_EATA_MAX_TAGS=16 +CONFIG_SCSI_FUTURE_DOMAIN=m +CONFIG_SCSI_GDTH=m +CONFIG_SCSI_ISCI=m +CONFIG_SCSI_IPS=m +CONFIG_SCSI_INITIO=m +CONFIG_SCSI_INIA100=m +CONFIG_SCSI_PPA=m +CONFIG_SCSI_IMM=m +# CONFIG_SCSI_IZIP_EPP16 is not set +# CONFIG_SCSI_IZIP_SLOW_CTR is not set +CONFIG_SCSI_STEX=m +CONFIG_SCSI_SYM53C8XX_2=m +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +CONFIG_SCSI_SYM53C8XX_MMIO=y +CONFIG_SCSI_IPR=m +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +CONFIG_SCSI_QLOGIC_1280=m +CONFIG_SCSI_QLA_FC=m +CONFIG_SCSI_QLA_ISCSI=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set +CONFIG_SCSI_DC395x=m +CONFIG_SCSI_DC390T=m +CONFIG_SCSI_DEBUG=m +CONFIG_SCSI_PMCRAID=m +CONFIG_SCSI_PM8001=m +CONFIG_SCSI_SRP=m +CONFIG_SCSI_BFA_FC=m +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_CHELSIO_FCOE=m +CONFIG_SCSI_LOWLEVEL_PCMCIA=y +CONFIG_PCMCIA_AHA152X=m +CONFIG_PCMCIA_FDOMAIN=m +CONFIG_PCMCIA_QLOGIC=m +CONFIG_PCMCIA_SYM53C500=m +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_SATA_INIC162X=m +CONFIG_SATA_ACARD_AHCI=m +CONFIG_SATA_SIL24=m +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +CONFIG_PDC_ADMA=m +CONFIG_SATA_QSTOR=m +CONFIG_SATA_SX4=m +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +CONFIG_ATA_PIIX=y +CONFIG_SATA_MV=m +CONFIG_SATA_NV=m +CONFIG_SATA_PROMISE=m +CONFIG_SATA_SIL=m +CONFIG_SATA_SIS=m +CONFIG_SATA_SVW=m +CONFIG_SATA_ULI=m +CONFIG_SATA_VIA=m +CONFIG_SATA_VITESSE=m + +# +# PATA SFF controllers with BMDMA +# +CONFIG_PATA_ALI=m +CONFIG_PATA_AMD=y +CONFIG_PATA_ARTOP=m +CONFIG_PATA_ATIIXP=m +CONFIG_PATA_ATP867X=m +CONFIG_PATA_CMD64X=m +CONFIG_PATA_CYPRESS=m +CONFIG_PATA_EFAR=m +CONFIG_PATA_HPT366=m +CONFIG_PATA_HPT37X=m +CONFIG_PATA_HPT3X2N=m +CONFIG_PATA_HPT3X3=m +CONFIG_PATA_HPT3X3_DMA=y +CONFIG_PATA_IT8213=m +CONFIG_PATA_IT821X=m +CONFIG_PATA_JMICRON=m +CONFIG_PATA_MARVELL=m +CONFIG_PATA_NETCELL=m +CONFIG_PATA_NINJA32=m +CONFIG_PATA_NS87415=m +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_OPTIDMA=m +CONFIG_PATA_PDC2027X=m +CONFIG_PATA_PDC_OLD=m +CONFIG_PATA_RADISYS=m +CONFIG_PATA_RDC=m +CONFIG_PATA_SCH=y +CONFIG_PATA_SERVERWORKS=m +CONFIG_PATA_SIL680=m +CONFIG_PATA_SIS=m +CONFIG_PATA_TOSHIBA=m +CONFIG_PATA_TRIFLEX=m +CONFIG_PATA_VIA=m +CONFIG_PATA_WINBOND=m + +# +# PIO-only SFF controllers +# +CONFIG_PATA_CMD640_PCI=m +CONFIG_PATA_MPIIX=m +CONFIG_PATA_NS87410=m +CONFIG_PATA_OPTI=m +CONFIG_PATA_PCMCIA=m +CONFIG_PATA_RZ1000=m + +# +# Generic fallback / legacy drivers +# +CONFIG_PATA_ACPI=m +CONFIG_ATA_GENERIC=m +CONFIG_PATA_LEGACY=m +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BCACHE=m +# CONFIG_BCACHE_DEBUG is not set +# CONFIG_BCACHE_CLOSURES_DEBUG is not set +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set +CONFIG_DM_BUFIO=m +CONFIG_DM_BIO_PRISON=m +CONFIG_DM_PERSISTENT_DATA=m +CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m +CONFIG_DM_CACHE_MQ=m +CONFIG_DM_CACHE_CLEANER=m +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +CONFIG_DM_SWITCH=m +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +# CONFIG_I2O is not set +CONFIG_MACINTOSH_DRIVERS=y +CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +# CONFIG_NET_FC is not set +CONFIG_IFB=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_NTB_NETDEV=m +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_SUNGEM_PHY=m +CONFIG_ARCNET=m +CONFIG_ARCNET_1201=m +CONFIG_ARCNET_1051=m +CONFIG_ARCNET_RAW=m +CONFIG_ARCNET_CAP=m +CONFIG_ARCNET_COM90xx=m +CONFIG_ARCNET_COM90xxIO=m +CONFIG_ARCNET_RIM_I=m +CONFIG_ARCNET_COM20020=m +CONFIG_ARCNET_COM20020_PCI=m +CONFIG_ARCNET_COM20020_CS=m + +# +# CAIF transport drivers +# +CONFIG_VHOST_NET=m +CONFIG_VHOST_RING=m +CONFIG_VHOST=m + +# +# Distributed Switch Architecture drivers +# +CONFIG_NET_DSA_MV88E6XXX=m +CONFIG_NET_DSA_MV88E6060=m +CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y +CONFIG_NET_DSA_MV88E6131=m +CONFIG_NET_DSA_MV88E6123_61_65=m +CONFIG_ETHERNET=y +CONFIG_MDIO=m +CONFIG_NET_VENDOR_3COM=y +CONFIG_PCMCIA_3C574=m +CONFIG_PCMCIA_3C589=m +CONFIG_VORTEX=m +CONFIG_TYPHOON=m +CONFIG_NET_VENDOR_ADAPTEC=y +CONFIG_ADAPTEC_STARFIRE=m +CONFIG_NET_VENDOR_ALTEON=y +CONFIG_ACENIC=m +# CONFIG_ACENIC_OMIT_TIGON_I is not set +CONFIG_ALTERA_TSE=m +CONFIG_NET_VENDOR_AMD=y +CONFIG_AMD8111_ETH=m +CONFIG_PCNET32=m +CONFIG_PCMCIA_NMCLAN=m +CONFIG_NET_VENDOR_ARC=y +CONFIG_NET_VENDOR_ATHEROS=y +CONFIG_ATL2=m +CONFIG_ATL1=m +CONFIG_ATL1E=m +CONFIG_ATL1C=m +CONFIG_ALX=m +CONFIG_NET_VENDOR_BROADCOM=y +CONFIG_B44=m +CONFIG_B44_PCI_AUTOSELECT=y +CONFIG_B44_PCICORE_AUTOSELECT=y +CONFIG_B44_PCI=y +CONFIG_BNX2=m +CONFIG_CNIC=m +CONFIG_TIGON3=y +CONFIG_BNX2X=m +CONFIG_BNX2X_SRIOV=y +CONFIG_NET_VENDOR_BROCADE=y +CONFIG_BNA=m +CONFIG_NET_CALXEDA_XGMAC=m +CONFIG_NET_VENDOR_CHELSIO=y +CONFIG_CHELSIO_T1=m +CONFIG_CHELSIO_T1_1G=y +CONFIG_CHELSIO_T3=m +CONFIG_CHELSIO_T4=m +CONFIG_CHELSIO_T4VF=m +CONFIG_NET_VENDOR_CISCO=y +CONFIG_ENIC=m +CONFIG_CX_ECAT=m +CONFIG_DNET=m +CONFIG_NET_VENDOR_DEC=y +CONFIG_NET_TULIP=y +CONFIG_DE2104X=m +CONFIG_DE2104X_DSL=0 +CONFIG_TULIP=m +CONFIG_TULIP_MWI=y +CONFIG_TULIP_MMIO=y +# CONFIG_TULIP_NAPI is not set +CONFIG_DE4X5=m +CONFIG_WINBOND_840=m +CONFIG_DM9102=m +CONFIG_ULI526X=m +CONFIG_PCMCIA_XIRCOM=m +CONFIG_NET_VENDOR_DLINK=y +CONFIG_DL2K=m +CONFIG_SUNDANCE=m +# CONFIG_SUNDANCE_MMIO is not set +CONFIG_NET_VENDOR_EMULEX=y +CONFIG_BE2NET=m +CONFIG_BE2NET_VXLAN=y +CONFIG_NET_VENDOR_EXAR=y +CONFIG_S2IO=m +CONFIG_VXGE=m +# CONFIG_VXGE_DEBUG_TRACE_ALL is not set +CONFIG_NET_VENDOR_FUJITSU=y +CONFIG_PCMCIA_FMVJ18X=m +CONFIG_NET_VENDOR_HP=y +CONFIG_HP100=m +CONFIG_NET_VENDOR_INTEL=y +CONFIG_E100=y +CONFIG_E1000=y +CONFIG_E1000E=m +CONFIG_IGB=m +CONFIG_IGB_HWMON=y +CONFIG_IGBVF=m +CONFIG_IXGB=m +CONFIG_IXGBE=m +CONFIG_IXGBE_HWMON=y +CONFIG_IXGBEVF=m +CONFIG_I40E=m +CONFIG_I40E_VXLAN=y +CONFIG_I40EVF=m +CONFIG_NET_VENDOR_I825XX=y +CONFIG_IP1000=m +CONFIG_JME=m +CONFIG_NET_VENDOR_MARVELL=y +CONFIG_MVMDIO=m +CONFIG_SKGE=m +# CONFIG_SKGE_DEBUG is not set +# CONFIG_SKGE_GENESIS is not set +CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set +CONFIG_NET_VENDOR_MELLANOX=y +CONFIG_MLX4_EN=m +CONFIG_MLX4_EN_VXLAN=y +CONFIG_MLX4_CORE=m +CONFIG_MLX4_DEBUG=y +# CONFIG_MLX5_CORE is not set +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +CONFIG_KS8851_MLL=m +CONFIG_KSZ884X_PCI=m +CONFIG_NET_VENDOR_MYRI=y +CONFIG_MYRI10GE=m +CONFIG_FEALNX=m +CONFIG_NET_VENDOR_NATSEMI=y +CONFIG_NATSEMI=m +CONFIG_NS83820=m +CONFIG_NET_VENDOR_8390=y +CONFIG_PCMCIA_AXNET=m +CONFIG_NE2K_PCI=m +CONFIG_PCMCIA_PCNET=m +CONFIG_NET_VENDOR_NVIDIA=y +CONFIG_FORCEDETH=y +CONFIG_NET_VENDOR_OKI=y +CONFIG_ETHOC=m +CONFIG_NET_PACKET_ENGINE=y +CONFIG_HAMACHI=m +CONFIG_YELLOWFIN=m +CONFIG_NET_VENDOR_QLOGIC=y +CONFIG_QLA3XXX=m +CONFIG_QLCNIC=m +CONFIG_QLCNIC_SRIOV=y +CONFIG_QLCNIC_VXLAN=y +CONFIG_QLCNIC_HWMON=y +CONFIG_QLGE=m +CONFIG_NETXEN_NIC=m +CONFIG_NET_VENDOR_REALTEK=y +CONFIG_ATP=m +CONFIG_8139CP=m +CONFIG_8139TOO=y +CONFIG_8139TOO_PIO=y +CONFIG_8139TOO_TUNE_TWISTER=y +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_R8169=y +CONFIG_SH_ETH=m +CONFIG_NET_VENDOR_RDC=y +CONFIG_R6040=m +CONFIG_NET_VENDOR_SAMSUNG=y +CONFIG_SXGBE_ETH=m +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_NET_VENDOR_SILAN=y +CONFIG_SC92031=m +CONFIG_NET_VENDOR_SIS=y +CONFIG_SIS900=m +CONFIG_SIS190=m +CONFIG_SFC=m +CONFIG_SFC_MCDI_MON=y +CONFIG_SFC_SRIOV=y +CONFIG_NET_VENDOR_SMSC=y +CONFIG_PCMCIA_SMC91C92=m +CONFIG_EPIC100=m +CONFIG_SMSC911X=m +# CONFIG_SMSC911X_ARCH_HOOKS is not set +CONFIG_SMSC9420=m +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_STMMAC_ETH=m +CONFIG_STMMAC_PLATFORM=y +CONFIG_STMMAC_PCI=y +CONFIG_STMMAC_DEBUG_FS=y +# CONFIG_STMMAC_DA is not set +CONFIG_NET_VENDOR_SUN=y +CONFIG_HAPPYMEAL=m +CONFIG_SUNGEM=m +# CONFIG_CASSINI is not set +CONFIG_NIU=m +CONFIG_NET_VENDOR_TEHUTI=y +CONFIG_TEHUTI=m +CONFIG_NET_VENDOR_TI=y +CONFIG_TLAN=m +CONFIG_NET_VENDOR_VIA=y +CONFIG_VIA_RHINE=m +# CONFIG_VIA_RHINE_MMIO is not set +CONFIG_VIA_VELOCITY=m +CONFIG_NET_VENDOR_WIZNET=y +CONFIG_WIZNET_W5100=m +CONFIG_WIZNET_W5300=m +# CONFIG_WIZNET_BUS_DIRECT is not set +# CONFIG_WIZNET_BUS_INDIRECT is not set +CONFIG_WIZNET_BUS_ANY=y +CONFIG_NET_VENDOR_XIRCOM=y +CONFIG_PCMCIA_XIRC2PS=m +CONFIG_FDDI=m +CONFIG_DEFXX=m +# CONFIG_DEFXX_MMIO is not set +CONFIG_SKFP=m +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_AT803X_PHY=m +CONFIG_AMD_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m +CONFIG_BCM7XXX_PHY=m +CONFIG_BCM87XX_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MICREL_PHY=m +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=m +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +# CONFIG_SLIP_SMART is not set +# CONFIG_SLIP_MODE_SLIP6 is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9700=m +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y +CONFIG_INPUT_SPARSEKMAP=y +CONFIG_INPUT_MATRIXKMAP=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ADP5520=m +CONFIG_KEYBOARD_ADP5588=m +CONFIG_KEYBOARD_ADP5589=m +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_QT1070=m +CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_LKKBD=m +CONFIG_KEYBOARD_TCA6416=m +CONFIG_KEYBOARD_TCA8418=m +CONFIG_KEYBOARD_LM8323=m +CONFIG_KEYBOARD_LM8333=m +CONFIG_KEYBOARD_MAX7359=m +CONFIG_KEYBOARD_MCS=m +CONFIG_KEYBOARD_MPR121=m +CONFIG_KEYBOARD_NEWTON=m +CONFIG_KEYBOARD_OPENCORES=m +CONFIG_KEYBOARD_STOWAWAY=m +CONFIG_KEYBOARD_SUNKBD=m +CONFIG_KEYBOARD_TC3589X=m +CONFIG_KEYBOARD_TWL4030=m +CONFIG_KEYBOARD_XTKBD=m +CONFIG_KEYBOARD_CROS_EC=m +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m +CONFIG_MOUSE_CYAPA=m +CONFIG_MOUSE_VSXXXAA=m +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +CONFIG_JOYSTICK_IFORCE_USB=y +CONFIG_JOYSTICK_IFORCE_232=y +CONFIG_JOYSTICK_WARRIOR=m +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_DB9=m +CONFIG_JOYSTICK_GAMECON=m +CONFIG_JOYSTICK_TURBOGRAFX=m +CONFIG_JOYSTICK_AS5011=m +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_XPAD_LEDS=y +CONFIG_JOYSTICK_WALKERA0701=m +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_HANWANG=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_USB_WACOM=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_88PM860X=m +CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_AD7879_I2C=m +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_BU21013=m +CONFIG_TOUCHSCREEN_CYTTSP_CORE=m +CONFIG_TOUCHSCREEN_CYTTSP_I2C=m +CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m +CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m +CONFIG_TOUCHSCREEN_DA9034=m +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_HAMPSHIRE=m +CONFIG_TOUCHSCREEN_EETI=m +CONFIG_TOUCHSCREEN_FUJITSU=m +CONFIG_TOUCHSCREEN_ILI210X=m +CONFIG_TOUCHSCREEN_GUNZE=m +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_WACOM_I2C=m +CONFIG_TOUCHSCREEN_MAX11801=m +CONFIG_TOUCHSCREEN_MCS5000=m +CONFIG_TOUCHSCREEN_MMS114=m +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_EDT_FT5X06=m +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m +CONFIG_TOUCHSCREEN_PIXCIR=m +CONFIG_TOUCHSCREEN_WM831X=m +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_MC13783=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_ELO=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y +CONFIG_TOUCHSCREEN_USB_NEXIO=y +CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y +CONFIG_TOUCHSCREEN_TOUCHIT213=m +CONFIG_TOUCHSCREEN_TSC_SERIO=m +CONFIG_TOUCHSCREEN_TSC2007=m +CONFIG_TOUCHSCREEN_ST1232=m +CONFIG_TOUCHSCREEN_SUR40=m +CONFIG_TOUCHSCREEN_TPS6507X=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_88PM860X_ONKEY=m +CONFIG_INPUT_88PM80X_ONKEY=m +CONFIG_INPUT_AD714X=m +CONFIG_INPUT_AD714X_I2C=m +CONFIG_INPUT_BMA150=m +CONFIG_INPUT_PCSPKR=m +CONFIG_INPUT_MAX8925_ONKEY=m +CONFIG_INPUT_MC13783_PWRBUTTON=m +CONFIG_INPUT_MMA8450=m +CONFIG_INPUT_MPU3050=m +CONFIG_INPUT_APANEL=m +CONFIG_INPUT_ATLAS_BTNS=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_KXTJ9=m +# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_RETU_PWRBUTTON=m +CONFIG_INPUT_TWL4030_PWRBUTTON=m +CONFIG_INPUT_TWL4030_VIBRA=m +CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_PCF50633_PMU=m +CONFIG_INPUT_PCF8574=m +CONFIG_INPUT_DA9055_ONKEY=m +CONFIG_INPUT_WM831X_ON=m +CONFIG_INPUT_ADXL34X=m +CONFIG_INPUT_ADXL34X_I2C=m +CONFIG_INPUT_IMS_PCU=m +CONFIG_INPUT_CMA3000=m +CONFIG_INPUT_CMA3000_I2C=m +CONFIG_INPUT_IDEAPAD_SLIDEBAR=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_CT82C710=m +CONFIG_SERIO_PARKBD=m +CONFIG_SERIO_PCIPS2=m +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m +CONFIG_SERIO_PS2MULT=m +CONFIG_SERIO_ARC_PS2=m +CONFIG_GAMEPORT=y +CONFIG_GAMEPORT_NS558=m +CONFIG_GAMEPORT_L4=m +CONFIG_GAMEPORT_EMU10K1=m +CONFIG_GAMEPORT_FM801=m + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_NONSTANDARD=y +CONFIG_ROCKETPORT=m +CONFIG_CYCLADES=m +# CONFIG_CYZ_INTR is not set +CONFIG_MOXA_INTELLIO=m +CONFIG_MOXA_SMARTIO=m +CONFIG_SYNCLINK=m +CONFIG_SYNCLINKMP=m +CONFIG_SYNCLINK_GT=m +CONFIG_NOZOMI=m +CONFIG_ISI=m +CONFIG_N_HDLC=m +CONFIG_N_GSM=m +CONFIG_TRACE_ROUTER=m +CONFIG_TRACE_SINK=m + +# +# KCopy +# +CONFIG_KCOPY=m +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_PNP=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DW=m + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_MFD_HSU=m +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_JSM=m +CONFIG_SERIAL_SCCNXP=m +CONFIG_SERIAL_SC16IS7XX=m +CONFIG_SERIAL_ALTERA_JTAGUART=m +CONFIG_SERIAL_ALTERA_UART=m +CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 +CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 +CONFIG_SERIAL_ARC=m +CONFIG_SERIAL_ARC_NR_PORTS=1 +CONFIG_SERIAL_RP2=m +CONFIG_SERIAL_RP2_NR_UARTS=32 +CONFIG_SERIAL_FSL_LPUART=m +CONFIG_SERIAL_MEN_Z135=m +CONFIG_PRINTER=m +# CONFIG_LP_CONSOLE is not set +CONFIG_PPDEV=m +CONFIG_HVC_DRIVER=y +CONFIG_VIRTIO_CONSOLE=m +CONFIG_IPMI_HANDLER=m +# CONFIG_IPMI_PANIC_EVENT is not set +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set +CONFIG_IPMI_WATCHDOG=m +CONFIG_IPMI_POWEROFF=m +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_HW_RANDOM_INTEL=m +CONFIG_HW_RANDOM_AMD=m +CONFIG_HW_RANDOM_VIA=y +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_NVRAM=y +CONFIG_R3964=m +CONFIG_APPLICOM=m + +# +# PCMCIA character devices +# +CONFIG_SYNCLINK_CS=m +CONFIG_CARDMAN_4000=m +CONFIG_CARDMAN_4040=m +CONFIG_IPWIRELESS=m +# CONFIG_MWAVE is not set +CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 +CONFIG_HPET=y +# CONFIG_HPET_MMAP is not set +# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +CONFIG_I2C_MUX_PCA9541=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_SMBUS=m +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +CONFIG_I2C_ALI1535=m +CONFIG_I2C_ALI1563=m +CONFIG_I2C_ALI15X3=m +CONFIG_I2C_AMD756=m +CONFIG_I2C_AMD756_S4882=m +CONFIG_I2C_AMD8111=m +CONFIG_I2C_I801=y +CONFIG_I2C_ISCH=m +CONFIG_I2C_ISMT=m +CONFIG_I2C_PIIX4=m +CONFIG_I2C_NFORCE2=m +CONFIG_I2C_NFORCE2_S4985=m +CONFIG_I2C_SIS5595=m +CONFIG_I2C_SIS630=m +CONFIG_I2C_SIS96X=m +CONFIG_I2C_VIA=m +CONFIG_I2C_VIAPRO=m + +# +# ACPI drivers +# +CONFIG_I2C_SCMI=m + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m +CONFIG_I2C_DESIGNWARE_PCI=m +CONFIG_I2C_KEMPLD=m +CONFIG_I2C_OCORES=m +CONFIG_I2C_PCA_PLATFORM=m +# CONFIG_I2C_PXA_PCI is not set +CONFIG_I2C_SIMTEC=m +CONFIG_I2C_XILINX=m + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_DIOLAN_U2C=m +CONFIG_I2C_PARPORT=m +CONFIG_I2C_PARPORT_LIGHT=m +CONFIG_I2C_ROBOTFUZZ_OSIF=m +CONFIG_I2C_TAOS_EVM=m +CONFIG_I2C_TINY_USB=m +CONFIG_I2C_VIPERBOARD=m + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_CROS_EC_TUNNEL=m +CONFIG_I2C_STUB=m +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_SPI is not set +CONFIG_SPMI=m +# CONFIG_HSI is not set + +# +# PPS support +# +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +CONFIG_PPS_CLIENT_KTIMER=m +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PPS_CLIENT_GPIO=m + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +CONFIG_W1=m +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_MATROX is not set +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2408 is not set +CONFIG_W1_SLAVE_DS2413=m +# CONFIG_W1_SLAVE_DS2423 is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +CONFIG_W1_SLAVE_DS2780=m +CONFIG_W1_SLAVE_DS2781=m +# CONFIG_W1_SLAVE_DS28E04 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PDA_POWER=m +CONFIG_GENERIC_ADC_BATTERY=m +CONFIG_MAX8925_POWER=m +CONFIG_WM831X_BACKUP=m +CONFIG_WM831X_POWER=m +CONFIG_WM8350_POWER=m +CONFIG_TEST_POWER=m +CONFIG_BATTERY_88PM860X=m +CONFIG_BATTERY_DS2780=m +CONFIG_BATTERY_DS2781=m +CONFIG_BATTERY_DS2782=m +CONFIG_BATTERY_SBS=m +CONFIG_BATTERY_BQ27x00=m +CONFIG_BATTERY_BQ27X00_I2C=y +CONFIG_BATTERY_BQ27X00_PLATFORM=y +CONFIG_BATTERY_DA9030=m +CONFIG_BATTERY_MAX17040=m +CONFIG_BATTERY_MAX17042=m +CONFIG_BATTERY_TWL4030_MADC=m +CONFIG_CHARGER_88PM860X=m +CONFIG_CHARGER_PCF50633=m +CONFIG_BATTERY_RX51=m +CONFIG_CHARGER_ISP1704=m +CONFIG_CHARGER_MAX8903=m +CONFIG_CHARGER_TWL4030=m +CONFIG_CHARGER_LP8727=m +# CONFIG_CHARGER_MANAGER is not set +CONFIG_CHARGER_MAX14577=m +CONFIG_CHARGER_MAX8997=m +CONFIG_CHARGER_MAX8998=m +CONFIG_CHARGER_BQ2415X=m +CONFIG_CHARGER_SMB347=m +CONFIG_POWER_RESET=y +CONFIG_POWER_AVS=y +CONFIG_HWMON=y +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +CONFIG_SENSORS_ABITUGURU=m +CONFIG_SENSORS_ABITUGURU3=m +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7X10=m +CONFIG_SENSORS_ADT7410=m +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_K8TEMP=m +CONFIG_SENSORS_K10TEMP=m +CONFIG_SENSORS_FAM15H_POWER=m +CONFIG_SENSORS_APPLESMC=m +CONFIG_SENSORS_ASB100=m +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_DA9055=m +CONFIG_SENSORS_I5K_AMB=m +CONFIG_SENSORS_F71805F=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_MC13783_ADC=m +CONFIG_SENSORS_FSCHMD=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_G760A=m +CONFIG_SENSORS_G762=m +CONFIG_SENSORS_HIH6130=m +CONFIG_SENSORS_IBMAEM=m +CONFIG_SENSORS_IBMPEX=m +CONFIG_SENSORS_IIO_HWMON=m +CONFIG_SENSORS_CORETEMP=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_JC42=m +CONFIG_SENSORS_LINEAGE=m +CONFIG_SENSORS_LTC2945=m +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +CONFIG_SENSORS_LTC4222=m +CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LTC4260=m +CONFIG_SENSORS_LTC4261=m +CONFIG_SENSORS_MAX16065=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m +CONFIG_SENSORS_MAX197=m +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_MAX6697=m +CONFIG_SENSORS_HTU21=m +CONFIG_SENSORS_MCP3021=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LM95234=m +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_PC87360=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_SENSORS_NCT6683=m +CONFIG_SENSORS_NCT6775=m +CONFIG_SENSORS_PCF8591=m +CONFIG_PMBUS=m +CONFIG_SENSORS_PMBUS=m +CONFIG_SENSORS_ADM1275=m +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m +CONFIG_SENSORS_MAX16064=m +CONFIG_SENSORS_MAX34440=m +CONFIG_SENSORS_MAX8688=m +CONFIG_SENSORS_UCD9000=m +CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SHTC1=m +CONFIG_SENSORS_SIS5595=m +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +CONFIG_SENSORS_EMC2103=m +CONFIG_SENSORS_EMC6W201=m +CONFIG_SENSORS_SMSC47M1=m +CONFIG_SENSORS_SMSC47M192=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_SCH56XX_COMMON=m +CONFIG_SENSORS_SCH5627=m +CONFIG_SENSORS_SCH5636=m +CONFIG_SENSORS_SMM665=m +CONFIG_SENSORS_ADC128D818=m +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_AMC6821=m +CONFIG_SENSORS_INA209=m +CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_TWL4030_MADC=m +CONFIG_SENSORS_VIA_CPUTEMP=m +CONFIG_SENSORS_VIA686A=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +CONFIG_SENSORS_W83627HF=m +CONFIG_SENSORS_W83627EHF=m +CONFIG_SENSORS_WM831X=m +CONFIG_SENSORS_WM8350=m + +# +# ACPI drivers +# +CONFIG_SENSORS_ACPI_POWER=m +CONFIG_SENSORS_ATK0110=m +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +# CONFIG_THERMAL_GOV_FAIR_SHARE is not set +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_GOV_USER_SPACE=y +CONFIG_THERMAL_EMULATION=y +CONFIG_INTEL_POWERCLAMP=m +CONFIG_X86_PKG_TEMP_THERMAL=m +CONFIG_ACPI_INT3403_THERMAL=m +CONFIG_INTEL_SOC_DTS_THERMAL=m + +# +# Texas Instruments thermal drivers +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_DA9055_WATCHDOG=m +CONFIG_WM831X_WATCHDOG=m +CONFIG_WM8350_WATCHDOG=m +CONFIG_XILINX_WATCHDOG=m +CONFIG_DW_WATCHDOG=m +CONFIG_TWL4030_WATCHDOG=m +CONFIG_RETU_WATCHDOG=m +CONFIG_ACQUIRE_WDT=m +CONFIG_ADVANTECH_WDT=m +CONFIG_ALIM1535_WDT=m +CONFIG_ALIM7101_WDT=m +CONFIG_F71808E_WDT=m +CONFIG_SP5100_TCO=m +CONFIG_SBC_FITPC2_WATCHDOG=m +CONFIG_EUROTECH_WDT=m +CONFIG_IB700_WDT=m +CONFIG_IBMASR=m +CONFIG_WAFER_WDT=m +CONFIG_I6300ESB_WDT=m +CONFIG_IE6XX_WDT=m +CONFIG_ITCO_WDT=m +CONFIG_ITCO_VENDOR_SUPPORT=y +CONFIG_IT8712F_WDT=m +CONFIG_IT87_WDT=m +CONFIG_HP_WATCHDOG=m +CONFIG_KEMPLD_WDT=m +CONFIG_HPWDT_NMI_DECODING=y +CONFIG_SC1200_WDT=m +CONFIG_PC87413_WDT=m +CONFIG_NV_TCO=m +CONFIG_60XX_WDT=m +CONFIG_CPU5_WDT=m +CONFIG_SMSC_SCH311X_WDT=m +CONFIG_SMSC37B787_WDT=m +CONFIG_VIA_WDT=m +CONFIG_W83627HF_WDT=m +CONFIG_W83877F_WDT=m +CONFIG_W83977F_WDT=m +CONFIG_MACHZ_WDT=m +CONFIG_SBC_EPX_C3_WATCHDOG=m + +# +# PCI-based Watchdog Cards +# +CONFIG_PCIPCWATCHDOG=m +CONFIG_WDTPCI=m + +# +# USB-based Watchdog Cards +# +CONFIG_USBPCWATCHDOG=m +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_SPROM=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set +CONFIG_SSB_PCMCIAHOST_POSSIBLE=y +CONFIG_SSB_PCMCIAHOST=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y +CONFIG_SSB_DEBUG=y +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +CONFIG_MFD_CS5535=m +# CONFIG_MFD_AS3711 is not set +CONFIG_PMIC_ADP5520=y +CONFIG_MFD_BCM590XX=m +CONFIG_MFD_AXP20X=y +CONFIG_MFD_CROS_EC=m +CONFIG_MFD_CROS_EC_I2C=m +CONFIG_PMIC_DA903X=y +# CONFIG_MFD_DA9052_I2C is not set +CONFIG_MFD_DA9055=y +CONFIG_MFD_DA9063=y +CONFIG_MFD_MC13XXX=m +CONFIG_MFD_MC13XXX_I2C=m +CONFIG_HTC_PASIC3=m +CONFIG_LPC_ICH=m +CONFIG_LPC_SCH=m +CONFIG_MFD_JANZ_CMODIO=m +CONFIG_MFD_KEMPLD=m +CONFIG_MFD_88PM800=m +CONFIG_MFD_88PM805=m +CONFIG_MFD_88PM860X=y +CONFIG_MFD_MAX14577=y +CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX77693=y +CONFIG_MFD_MAX8907=m +CONFIG_MFD_MAX8925=y +CONFIG_MFD_MAX8997=y +CONFIG_MFD_MAX8998=y +CONFIG_MFD_VIPERBOARD=m +CONFIG_MFD_RETU=m +CONFIG_MFD_PCF50633=m +CONFIG_PCF50633_ADC=m +CONFIG_PCF50633_GPIO=m +CONFIG_MFD_RDC321X=m +CONFIG_MFD_RTSX_PCI=m +CONFIG_MFD_RTSX_USB=m +# CONFIG_MFD_RC5T583 is not set +CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_SI476X_CORE=m +CONFIG_MFD_SM501=m +CONFIG_MFD_SMSC=y +CONFIG_ABX500_CORE=y +CONFIG_AB3100_CORE=y +CONFIG_AB3100_OTP=m +CONFIG_MFD_SYSCON=y +CONFIG_MFD_TI_AM335X_TSCADC=m +CONFIG_MFD_LP3943=m +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_PALMAS is not set +CONFIG_TPS6105X=m +CONFIG_TPS6507X=m +# CONFIG_MFD_TPS65090 is not set +CONFIG_MFD_TPS65217=m +CONFIG_MFD_TPS65218=m +CONFIG_MFD_TPS6586X=y +# CONFIG_MFD_TPS80031 is not set +CONFIG_TWL4030_CORE=y +CONFIG_MFD_TWL4030_AUDIO=y +# CONFIG_TWL6040_CORE is not set +CONFIG_MFD_WL1273_CORE=m +CONFIG_MFD_LM3533=m +CONFIG_MFD_TC3589X=y +# CONFIG_MFD_TMIO is not set +CONFIG_MFD_VX855=m +CONFIG_MFD_ARIZONA=y +CONFIG_MFD_ARIZONA_I2C=m +CONFIG_MFD_WM5102=y +CONFIG_MFD_WM5110=y +CONFIG_MFD_WM8997=y +CONFIG_MFD_WM8400=y +CONFIG_MFD_WM831X=y +CONFIG_MFD_WM831X_I2C=y +CONFIG_MFD_WM8350=y +CONFIG_MFD_WM8350_I2C=y +CONFIG_MFD_WM8994=y +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=m +CONFIG_REGULATOR_VIRTUAL_CONSUMER=m +CONFIG_REGULATOR_USERSPACE_CONSUMER=m +CONFIG_REGULATOR_88PM800=m +CONFIG_REGULATOR_88PM8607=m +CONFIG_REGULATOR_ACT8865=m +CONFIG_REGULATOR_AD5398=m +CONFIG_REGULATOR_ANATOP=m +CONFIG_REGULATOR_AB3100=m +CONFIG_REGULATOR_AXP20X=m +CONFIG_REGULATOR_BCM590XX=m +CONFIG_REGULATOR_DA903X=m +CONFIG_REGULATOR_DA9055=m +CONFIG_REGULATOR_DA9063=m +CONFIG_REGULATOR_DA9210=m +CONFIG_REGULATOR_FAN53555=m +CONFIG_REGULATOR_ISL6271A=m +CONFIG_REGULATOR_LP3971=m +CONFIG_REGULATOR_LP3972=m +CONFIG_REGULATOR_LP872X=m +CONFIG_REGULATOR_LP8755=m +CONFIG_REGULATOR_LTC3589=m +CONFIG_REGULATOR_MAX14577=m +CONFIG_REGULATOR_MAX1586=m +CONFIG_REGULATOR_MAX8649=m +CONFIG_REGULATOR_MAX8660=m +CONFIG_REGULATOR_MAX8907=m +CONFIG_REGULATOR_MAX8925=m +CONFIG_REGULATOR_MAX8952=m +CONFIG_REGULATOR_MAX8973=m +CONFIG_REGULATOR_MAX8997=m +CONFIG_REGULATOR_MAX8998=m +CONFIG_REGULATOR_MAX77686=m +CONFIG_REGULATOR_MAX77693=m +CONFIG_REGULATOR_MC13XXX_CORE=m +CONFIG_REGULATOR_MC13783=m +CONFIG_REGULATOR_MC13892=m +CONFIG_REGULATOR_PCF50633=m +CONFIG_REGULATOR_PFUZE100=m +CONFIG_REGULATOR_S2MPA01=m +CONFIG_REGULATOR_S2MPS11=m +CONFIG_REGULATOR_S5M8767=m +CONFIG_REGULATOR_TPS51632=m +CONFIG_REGULATOR_TPS6105X=m +CONFIG_REGULATOR_TPS62360=m +CONFIG_REGULATOR_TPS65023=m +CONFIG_REGULATOR_TPS6507X=m +CONFIG_REGULATOR_TPS65217=m +CONFIG_REGULATOR_TPS6586X=m +CONFIG_REGULATOR_TWL4030=m +CONFIG_REGULATOR_WM831X=m +CONFIG_REGULATOR_WM8350=m +CONFIG_REGULATOR_WM8400=m +CONFIG_REGULATOR_WM8994=m +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +CONFIG_MEDIA_RC_SUPPORT=y +# CONFIG_MEDIA_CONTROLLER is not set +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_TUNER=m +CONFIG_V4L2_MEM2MEM_DEV=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEOBUF_DVB=m +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_DMA_CONTIG=m +CONFIG_VIDEOBUF2_VMALLOC=m +CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_VIDEOBUF2_DVB=m +CONFIG_DVB_CORE=y +CONFIG_DVB_NET=y +CONFIG_TTPCI_EEPROM=m +CONFIG_DVB_MAX_ADAPTERS=8 +# CONFIG_DVB_DYNAMIC_MINORS is not set + +# +# Media drivers +# +CONFIG_RC_CORE=y +CONFIG_RC_MAP=y +CONFIG_RC_DECODERS=y +CONFIG_LIRC=y +CONFIG_IR_LIRC_CODEC=y +CONFIG_IR_NEC_DECODER=y +CONFIG_IR_RC5_DECODER=y +CONFIG_IR_RC6_DECODER=y +CONFIG_IR_JVC_DECODER=y +CONFIG_IR_SONY_DECODER=y +CONFIG_IR_RC5_SZ_DECODER=y +CONFIG_IR_SANYO_DECODER=y +CONFIG_IR_SHARP_DECODER=m +CONFIG_IR_MCE_KBD_DECODER=y +CONFIG_RC_DEVICES=y +CONFIG_RC_ATI_REMOTE=m +CONFIG_IR_ENE=m +CONFIG_IR_IMON=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_ITE_CIR=m +CONFIG_IR_FINTEK=m +CONFIG_IR_NUVOTON=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +CONFIG_IR_WINBOND_CIR=m +CONFIG_IR_IGUANA=m +CONFIG_IR_TTUSBIR=m +CONFIG_IR_IMG=m +CONFIG_IR_IMG_RAW=y +CONFIG_IR_IMG_HW=y +CONFIG_IR_IMG_NEC=y +CONFIG_IR_IMG_JVC=y +CONFIG_IR_IMG_SONY=y +CONFIG_IR_IMG_SHARP=y +CONFIG_IR_IMG_SANYO=y +CONFIG_RC_LOOPBACK=m +CONFIG_IR_GPIO_CIR=m +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_DTCS033=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_JL2005BCD=m +CONFIG_USB_GSPCA_KINECT=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STK1135=m +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +CONFIG_VIDEO_CPIA2=m +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +CONFIG_VIDEO_USBTV=m + +# +# Analog TV USB devices +# +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_TLG2300=m +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_STK1160_COMMON=m +CONFIG_VIDEO_STK1160_AC97=y +CONFIG_VIDEO_STK1160=m + +# +# Analog/digital TV USB devices +# +CONFIG_VIDEO_AU0828=m +CONFIG_VIDEO_AU0828_V4L2=y +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_RC=y +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +CONFIG_VIDEO_TM6000=m +CONFIG_VIDEO_TM6000_ALSA=m +CONFIG_VIDEO_TM6000_DVB=m + +# +# Digital TV USB devices +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +# CONFIG_DVB_USB_A800 is not set +CONFIG_DVB_USB_DIBUSB_MB=m +CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_FRIIO=m +CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_V2=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_AF9035=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_AZ6007=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_EC168=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_LME2510=m +CONFIG_DVB_USB_MXL111SF=m +CONFIG_DVB_USB_RTL28XXU=m +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +CONFIG_SMS_USB_DRV=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set + +# +# Webcam, TV (analog/digital) USB devices +# +CONFIG_VIDEO_EM28XX=m +CONFIG_VIDEO_EM28XX_V4L2=m +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_EM28XX_RC=m +CONFIG_MEDIA_PCI_SUPPORT=y + +# +# Media capture support +# + +# +# Media capture/analog TV support +# +CONFIG_VIDEO_IVTV=m +CONFIG_VIDEO_IVTV_ALSA=m +CONFIG_VIDEO_FB_IVTV=m +CONFIG_VIDEO_ZORAN=m +CONFIG_VIDEO_ZORAN_DC30=m +CONFIG_VIDEO_ZORAN_ZR36060=m +CONFIG_VIDEO_ZORAN_BUZ=m +CONFIG_VIDEO_ZORAN_DC10=m +CONFIG_VIDEO_ZORAN_LML33=m +CONFIG_VIDEO_ZORAN_LML33R10=m +CONFIG_VIDEO_ZORAN_AVS6EYES=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_MXB=m + +# +# Media capture/analog/hybrid TV support +# +CONFIG_VIDEO_CX18=m +CONFIG_VIDEO_CX18_ALSA=m +CONFIG_VIDEO_CX23885=m +CONFIG_MEDIA_ALTERA_CI=m +CONFIG_VIDEO_CX25821=m +CONFIG_VIDEO_CX25821_ALSA=m +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_CX88_ALSA=m +CONFIG_VIDEO_CX88_BLACKBIRD=m +CONFIG_VIDEO_CX88_DVB=m +CONFIG_VIDEO_CX88_ENABLE_VP3054=y +CONFIG_VIDEO_CX88_VP3054=m +CONFIG_VIDEO_CX88_MPEG=m +CONFIG_VIDEO_BT848=m +CONFIG_DVB_BT8XX=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_SAA7134_ALSA=m +CONFIG_VIDEO_SAA7134_RC=y +CONFIG_VIDEO_SAA7134_DVB=m +CONFIG_VIDEO_SAA7164=m + +# +# Media digital TV PCI Adapters +# +CONFIG_DVB_AV7110=m +CONFIG_DVB_AV7110_OSD=y +CONFIG_DVB_BUDGET_CORE=m +CONFIG_DVB_BUDGET=m +CONFIG_DVB_BUDGET_CI=m +CONFIG_DVB_BUDGET_AV=m +CONFIG_DVB_BUDGET_PATCH=m +CONFIG_DVB_B2C2_FLEXCOP_PCI=m +# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set +CONFIG_DVB_PLUTO2=m +CONFIG_DVB_DM1105=m +CONFIG_DVB_PT1=m +CONFIG_MANTIS_CORE=m +CONFIG_DVB_MANTIS=m +CONFIG_DVB_HOPPER=m +CONFIG_DVB_NGENE=m +CONFIG_DVB_DDBRIDGE=m +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_CAFE_CCIC=m +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_SCALE_CROP=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_RCAR_VIN=m +# CONFIG_V4L_MEM2MEM_DRIVERS is not set +CONFIG_V4L_TEST_DRIVERS=y +CONFIG_VIDEO_VIVI=m +CONFIG_VIDEO_MEM2MEM_TESTDEV=m + +# +# Supported MMC/SDIO adapters +# +CONFIG_SMS_SDIO_DRV=m +CONFIG_MEDIA_PARPORT_SUPPORT=y +CONFIG_VIDEO_BWQCAM=m +CONFIG_VIDEO_CQCAM=m +CONFIG_VIDEO_W9966=m +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_TEA575X=m +CONFIG_RADIO_SI470X=y +CONFIG_USB_SI470X=m +CONFIG_I2C_SI470X=m +CONFIG_RADIO_SI4713=m +CONFIG_USB_SI4713=m +CONFIG_PLATFORM_SI4713=m +CONFIG_I2C_SI4713=m +CONFIG_USB_MR800=m +CONFIG_USB_DSBR=m +CONFIG_RADIO_MAXIRADIO=m +CONFIG_RADIO_SHARK=m +CONFIG_RADIO_SHARK2=m +CONFIG_USB_KEENE=m +CONFIG_USB_RAREMONO=m +CONFIG_USB_MA901=m +CONFIG_RADIO_TEA5764=m +CONFIG_RADIO_SAA7706H=m +CONFIG_RADIO_TEF6862=m +CONFIG_RADIO_WL1273=m + +# +# Texas Instruments WL128x FM driver (ST based) +# +CONFIG_MEDIA_COMMON_OPTIONS=y + +# +# common driver options +# +CONFIG_VIDEO_CX2341X=m +CONFIG_VIDEO_BTCX=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_CYPRESS_FIRMWARE=m +CONFIG_DVB_B2C2_FLEXCOP=m +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_SMS_SIANO_MDTV=m +CONFIG_SMS_SIANO_RC=y +# CONFIG_SMS_SIANO_DEBUGFS is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, frontends) +# +CONFIG_MEDIA_SUBDRV_AUTOSELECT=y +CONFIG_MEDIA_ATTACH=y +CONFIG_VIDEO_IR_I2C=y + +# +# Audio decoders, processors and mixers +# +CONFIG_VIDEO_TVAUDIO=m +CONFIG_VIDEO_TDA7432=m +CONFIG_VIDEO_TDA9840=m +CONFIG_VIDEO_TEA6415C=m +CONFIG_VIDEO_TEA6420=m +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS5345=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_WM8739=m +CONFIG_VIDEO_VP27SMPX=m + +# +# RDS decoders +# +CONFIG_VIDEO_SAA6588=m + +# +# Video decoders +# +CONFIG_VIDEO_BT819=m +CONFIG_VIDEO_BT856=m +CONFIG_VIDEO_BT866=m +CONFIG_VIDEO_KS0127=m +CONFIG_VIDEO_SAA7110=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_TVP5150=m +CONFIG_VIDEO_VPX3220=m + +# +# Video and audio decoders +# +CONFIG_VIDEO_SAA717X=m +CONFIG_VIDEO_CX25840=m + +# +# Video encoders +# +CONFIG_VIDEO_SAA7127=m +CONFIG_VIDEO_SAA7185=m +CONFIG_VIDEO_ADV7170=m +CONFIG_VIDEO_ADV7175=m + +# +# Camera sensor devices +# +CONFIG_VIDEO_OV7670=m +CONFIG_VIDEO_MT9V011=m + +# +# Flash devices +# + +# +# Video improvement chips +# +CONFIG_VIDEO_UPD64031A=m +CONFIG_VIDEO_UPD64083=m + +# +# Audio/Video compression chips +# +CONFIG_VIDEO_SAA6752HS=m + +# +# Miscellaneous helper chips +# +CONFIG_VIDEO_M52790=m + +# +# Sensors used on soc_camera driver +# + +# +# soc_camera sensor drivers +# +CONFIG_SOC_CAMERA_IMX074=m +CONFIG_SOC_CAMERA_MT9M001=m +CONFIG_SOC_CAMERA_MT9M111=m +CONFIG_SOC_CAMERA_MT9T031=m +CONFIG_SOC_CAMERA_MT9T112=m +CONFIG_SOC_CAMERA_MT9V022=m +CONFIG_SOC_CAMERA_OV2640=m +CONFIG_SOC_CAMERA_OV5642=m +CONFIG_SOC_CAMERA_OV6650=m +CONFIG_SOC_CAMERA_OV772X=m +CONFIG_SOC_CAMERA_OV9640=m +CONFIG_SOC_CAMERA_OV9740=m +CONFIG_SOC_CAMERA_RJ54N1=m +CONFIG_SOC_CAMERA_TW9910=m +CONFIG_MEDIA_TUNER=y +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA827X=y +CONFIG_MEDIA_TUNER_TDA18271=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_XC4000=y +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_M88TS2022=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_SI2168=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +CONFIG_AGP=y +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=m +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_VIA is not set +CONFIG_INTEL_GTT=m +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +# CONFIG_VGA_SWITCHEROO is not set + +# +# Direct Rendering Manager +# +CONFIG_DRM=y +CONFIG_DRM_USB=m +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +CONFIG_DRM_TTM=y + +# +# I2C encoder or helper chips +# +# CONFIG_DRM_I2C_CH7006 is not set +# CONFIG_DRM_I2C_SIL164 is not set +CONFIG_DRM_I2C_NXP_TDA998X=m +CONFIG_DRM_PTN3460=m +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +CONFIG_DRM_RADEON=y +# CONFIG_DRM_RADEON_UMS is not set +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_I810 is not set +CONFIG_DRM_I915=m +CONFIG_DRM_I915_KMS=y +CONFIG_DRM_I915_FBDEV=y +# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_DRM_VMWGFX is not set +# CONFIG_DRM_GMA500 is not set +CONFIG_DRM_UDL=m +CONFIG_DRM_AST=m +CONFIG_DRM_MGAG200=m +CONFIG_DRM_CIRRUS_QEMU=m +CONFIG_DRM_QXL=m +CONFIG_DRM_BOCHS=m + +# +# Frame buffer Devices +# +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +# CONFIG_FB_EFI is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +CONFIG_FB_OPENCORES=m +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SM501 is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_FB_AUO_K190X=m +CONFIG_FB_AUO_K1900=m +CONFIG_FB_AUO_K1901=m +# CONFIG_FB_SIMPLE is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_LM3533=m +# CONFIG_BACKLIGHT_DA903X is not set +# CONFIG_BACKLIGHT_MAX8925 is not set +# CONFIG_BACKLIGHT_APPLE is not set +# CONFIG_BACKLIGHT_SAHARA is not set +# CONFIG_BACKLIGHT_WM831X is not set +# CONFIG_BACKLIGHT_ADP5520 is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_88PM860X is not set +# CONFIG_BACKLIGHT_PCF50633 is not set +CONFIG_BACKLIGHT_LM3639=m +# CONFIG_BACKLIGHT_PANDORA is not set +CONFIG_BACKLIGHT_TPS65217=m +CONFIG_BACKLIGHT_LV5207LP=m +CONFIG_BACKLIGHT_BD6107=m +# CONFIG_VGASTATE is not set +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=m +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_MAX_CARDS=32 +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_KCTL_JACK=y +CONFIG_SND_DMA_SGBUF=y +CONFIG_SND_RAWMIDI_SEQ=m +CONFIG_SND_OPL3_LIB_SEQ=m +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +CONFIG_SND_EMU10K1_SEQ=m +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_VX_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +CONFIG_SND_PCSP=m +CONFIG_SND_DUMMY=m +CONFIG_SND_ALOOP=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +CONFIG_SND_MTS64=m +CONFIG_SND_SERIAL_U16550=m +CONFIG_SND_MPU401=m +CONFIG_SND_PORTMAN2X4=m +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_SB_COMMON=m +CONFIG_SND_PCI=y +CONFIG_SND_AD1889=m +CONFIG_SND_ALS300=m +CONFIG_SND_ALS4000=m +CONFIG_SND_ALI5451=m +CONFIG_SND_ASIHPI=m +CONFIG_SND_ATIIXP=m +CONFIG_SND_ATIIXP_MODEM=m +CONFIG_SND_AU8810=m +CONFIG_SND_AU8820=m +CONFIG_SND_AU8830=m +CONFIG_SND_AW2=m +CONFIG_SND_AZT3328=m +CONFIG_SND_BT87X=m +# CONFIG_SND_BT87X_OVERCLOCK is not set +CONFIG_SND_CA0106=m +CONFIG_SND_CMIPCI=m +CONFIG_SND_OXYGEN_LIB=m +CONFIG_SND_OXYGEN=m +CONFIG_SND_CS4281=m +CONFIG_SND_CS46XX=m +CONFIG_SND_CS46XX_NEW_DSP=y +CONFIG_SND_CTXFI=m +CONFIG_SND_DARLA20=m +CONFIG_SND_GINA20=m +CONFIG_SND_LAYLA20=m +CONFIG_SND_DARLA24=m +CONFIG_SND_GINA24=m +CONFIG_SND_LAYLA24=m +CONFIG_SND_MONA=m +CONFIG_SND_MIA=m +CONFIG_SND_ECHO3G=m +CONFIG_SND_INDIGO=m +CONFIG_SND_INDIGOIO=m +CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m +CONFIG_SND_EMU10K1=m +CONFIG_SND_EMU10K1X=m +CONFIG_SND_ENS1370=m +CONFIG_SND_ENS1371=m +CONFIG_SND_ES1938=m +CONFIG_SND_ES1968=m +# CONFIG_SND_ES1968_INPUT is not set +# CONFIG_SND_ES1968_RADIO is not set +CONFIG_SND_FM801=m +# CONFIG_SND_FM801_TEA575X_BOOL is not set +CONFIG_SND_HDSP=m +CONFIG_SND_HDSPM=m +CONFIG_SND_ICE1712=m +CONFIG_SND_ICE1724=m +CONFIG_SND_INTEL8X0=m +CONFIG_SND_INTEL8X0M=m +CONFIG_SND_KORG1212=m +CONFIG_SND_LOLA=m +CONFIG_SND_LX6464ES=m +CONFIG_SND_MAESTRO3=m +# CONFIG_SND_MAESTRO3_INPUT is not set +CONFIG_SND_MIXART=m +CONFIG_SND_NM256=m +CONFIG_SND_PCXHR=m +CONFIG_SND_RIPTIDE=m +CONFIG_SND_RME32=m +CONFIG_SND_RME96=m +CONFIG_SND_RME9652=m +CONFIG_SND_SONICVIBES=m +CONFIG_SND_TRIDENT=m +CONFIG_SND_VIA82XX=m +CONFIG_SND_VIA82XX_MODEM=m +CONFIG_SND_VIRTUOSO=m +CONFIG_SND_VX222=m +CONFIG_SND_YMFPCI=m + +# +# HD-Audio +# +CONFIG_SND_HDA=y +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_DSP_LOADER=y +CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_HDA_HWDEP=y +# CONFIG_SND_HDA_RECONFIG is not set +# CONFIG_SND_HDA_INPUT_BEEP is not set +# CONFIG_SND_HDA_INPUT_JACK is not set +# CONFIG_SND_HDA_PATCH_LOADER is not set +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_HDMI=y +CONFIG_SND_HDA_I915=y +CONFIG_SND_HDA_CODEC_CIRRUS=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CA0110=y +CONFIG_SND_HDA_CODEC_CA0132=y +CONFIG_SND_HDA_CODEC_CA0132_DSP=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_USX2Y=m +CONFIG_SND_USB_CAIAQ=m +# CONFIG_SND_USB_CAIAQ_INPUT is not set +CONFIG_SND_USB_US122L=m +CONFIG_SND_USB_6FIRE=m +CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m +# CONFIG_SND_PCMCIA is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID support +# +CONFIG_HID=y +# CONFIG_HID_BATTERY_STRENGTH is not set +CONFIG_HIDRAW=y +CONFIG_UHID=m +CONFIG_HID_GENERIC=m + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_ACRUX=m +CONFIG_HID_ACRUX_FF=y +CONFIG_HID_APPLE=y +CONFIG_HID_APPLEIR=m +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EMS_FF=m +CONFIG_HID_ELECOM=m +CONFIG_HID_ELO=m +CONFIG_HID_EZKEY=y +CONFIG_HID_HOLTEK=m +CONFIG_HOLTEK_FF=y +CONFIG_HID_HUION=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=y +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=y +CONFIG_HID_ICADE=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LCPOWER=m +# CONFIG_HID_LENOVO_TPKBD is not set +CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH_DJ=m +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_LOGIG940_FF=y +CONFIG_LOGIWHEELS_FF=y +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=y +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PICOLCD_CIR=y +CONFIG_HID_PRIMAX=m +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_SONY_FF=y +CONFIG_HID_SPEEDLINK=m +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=y +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=y +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_HUB=m + +# +# USB HID support +# +CONFIG_USB_HID=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# I2C HID support +# +CONFIG_I2C_HID=m +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_OTG=y +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_OTG_FSM=m +CONFIG_USB_MON=y +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_C67X00_HCD=m +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PLATFORM=m +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OXU210HP_HCD=m +CONFIG_USB_ISP116X_HCD=m +CONFIG_USB_ISP1760_HCD=m +CONFIG_USB_ISP1362_HCD=m +CONFIG_USB_FUSBH200_HCD=m +CONFIG_USB_FOTG210_HCD=m +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=m +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_U132_HCD=m +CONFIG_USB_SL811_HCD=m +# CONFIG_USB_SL811_HCD_ISO is not set +CONFIG_USB_SL811_CS=m +CONFIG_USB_R8A66597_HCD=m +CONFIG_USB_RENESAS_USBHS_HCD=m +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m +CONFIG_USB_HCD_SSB=m +# CONFIG_USB_HCD_TEST_MODE is not set +CONFIG_USB_RENESAS_USBHS=m + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=y +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_MUSB_HDRC=m +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_GADGET is not set +CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_TUSB6010=m +CONFIG_USB_MUSB_UX500=m +# CONFIG_USB_UX500_DMA is not set +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_DWC3=m +# CONFIG_USB_DWC3_HOST is not set +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_DUAL_ROLE=y + +# +# Platform Glue Driver Support +# +CONFIG_USB_DWC3_PCI=m + +# +# Debugging features +# +# CONFIG_USB_DWC3_DEBUG is not set +CONFIG_USB_DWC2=y +CONFIG_USB_DWC2_HOST=m +CONFIG_USB_DWC2_PLATFORM=y +CONFIG_USB_DWC2_PCI=y + +# +# Gadget mode requires USB Gadget support to be enabled +# +CONFIG_USB_DWC2_PERIPHERAL=m +# CONFIG_USB_DWC2_DEBUG is not set +# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set +CONFIG_USB_CHIPIDEA=m +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +# CONFIG_USB_CHIPIDEA_DEBUG is not set + +# +# USB port drivers +# +CONFIG_USB_USS720=m +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_F81232=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_METRO=m +CONFIG_USB_SERIAL_MOS7720=m +# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MXUPORT=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_XSENS_MT=m +CONFIG_USB_SERIAL_WISHBONE=m +CONFIG_USB_SERIAL_ZTE=m +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_QT2=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +# CONFIG_USB_SISUSBVGA_CON is not set +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=m +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_YUREX=m +CONFIG_USB_EZUSB_FX2=m +CONFIG_USB_HSIC_USB3503=m + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +CONFIG_NOP_USB_XCEIV=m +CONFIG_SAMSUNG_USBPHY=m +CONFIG_SAMSUNG_USB2PHY=m +CONFIG_SAMSUNG_USB3PHY=m +CONFIG_TAHVO_USB=m +# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set +CONFIG_USB_ISP1301=m +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +CONFIG_USB_FOTG210_UDC=m +CONFIG_USB_GR_UDC=m +CONFIG_USB_R8A66597=m +CONFIG_USB_RENESAS_USBHS_UDC=m +CONFIG_USB_PXA27X=m +CONFIG_USB_MV_UDC=m +CONFIG_USB_MV_U3D=m +CONFIG_USB_M66592=m +CONFIG_USB_AMD5536UDC=m +CONFIG_USB_NET2272=m +CONFIG_USB_NET2272_DMA=y +CONFIG_USB_NET2280=m +CONFIG_USB_GOKU=m +CONFIG_USB_EG20T=m +CONFIG_USB_DUMMY_HCD=m +CONFIG_USB_LIBCOMPOSITE=m +CONFIG_USB_F_ACM=m +CONFIG_USB_F_SS_LB=m +CONFIG_USB_U_SERIAL=m +CONFIG_USB_U_ETHER=m +CONFIG_USB_F_SERIAL=m +CONFIG_USB_F_OBEX=m +CONFIG_USB_F_NCM=m +CONFIG_USB_F_ECM=m +CONFIG_USB_F_SUBSET=m +CONFIG_USB_F_RNDIS=m +CONFIG_USB_F_MASS_STORAGE=m +CONFIG_USB_F_FS=m +CONFIG_USB_CONFIGFS=m +# CONFIG_USB_CONFIGFS_SERIAL is not set +# CONFIG_USB_CONFIGFS_ACM is not set +# CONFIG_USB_CONFIGFS_OBEX is not set +# CONFIG_USB_CONFIGFS_NCM is not set +# CONFIG_USB_CONFIGFS_ECM is not set +# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set +# CONFIG_USB_CONFIGFS_RNDIS is not set +# CONFIG_USB_CONFIGFS_EEM is not set +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_ZERO=m +CONFIG_USB_ZERO_HNPTEST=y +CONFIG_USB_AUDIO=m +# CONFIG_GADGET_UAC1 is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_G_NCM=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FUNCTIONFS=m +# CONFIG_USB_FUNCTIONFS_ETH is not set +# CONFIG_USB_FUNCTIONFS_RNDIS is not set +CONFIG_USB_FUNCTIONFS_GENERIC=y +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_USB_MIDI_GADGET=m +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_USB_G_ACM_MS=m +CONFIG_USB_G_MULTI=m +CONFIG_USB_G_MULTI_RNDIS=y +# CONFIG_USB_G_MULTI_CDC is not set +CONFIG_USB_G_HID=m +CONFIG_USB_G_DBGP=m +# CONFIG_USB_G_DBGP_PRINTK is not set +CONFIG_USB_G_DBGP_SERIAL=y +CONFIG_USB_G_WEBCAM=m +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +# CONFIG_UWB_I1480U is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_CLKGATE is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +CONFIG_MMC_TEST=m + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PCI=m +# CONFIG_MMC_RICOH_MMC is not set +CONFIG_MMC_SDHCI_ACPI=m +CONFIG_MMC_SDHCI_PLTFM=m +CONFIG_MMC_WBSD=m +CONFIG_MMC_TIFM_SD=m +CONFIG_MMC_SDRICOH_CS=m +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +CONFIG_MMC_USDHI6ROL0=m +CONFIG_MMC_REALTEK_PCI=m +CONFIG_MMC_REALTEK_USB=m +CONFIG_MEMSTICK=m +# CONFIG_MEMSTICK_DEBUG is not set + +# +# MemoryStick drivers +# +# CONFIG_MEMSTICK_UNSAFE_RESUME is not set +CONFIG_MSPRO_BLOCK=m +CONFIG_MS_BLOCK=m + +# +# MemoryStick Host Controller Drivers +# +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_MEMSTICK_R592=m +CONFIG_MEMSTICK_REALTEK_PCI=m +CONFIG_MEMSTICK_REALTEK_USB=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_88PM860X is not set +CONFIG_LEDS_LM3530=m +CONFIG_LEDS_LM3533=m +CONFIG_LEDS_LM3642=m +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_LP55XX_COMMON=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m +CONFIG_LEDS_LP5562=m +CONFIG_LEDS_LP8501=m +CONFIG_LEDS_CLEVO_MAIL=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_PCA963X=m +CONFIG_LEDS_WM831X_STATUS=m +CONFIG_LEDS_WM8350=m +CONFIG_LEDS_DA903X=m +CONFIG_LEDS_REGULATOR=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_INTEL_SS4200=m +CONFIG_LEDS_ADP5520=m +CONFIG_LEDS_DELL_NETBOOKS=m +CONFIG_LEDS_MC13783=m +CONFIG_LEDS_TCA6507=m +CONFIG_LEDS_MAX8997=m +CONFIG_LEDS_LM355x=m + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +CONFIG_LEDS_BLINKM=m + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_ONESHOT=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y +CONFIG_EDAC_LEGACY_SYSFS=y +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_DECODE_MCE=y +# CONFIG_EDAC_MCE_INJ is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +CONFIG_RTC_DRV_TEST=m + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_88PM860X=m +CONFIG_RTC_DRV_88PM80X=m +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_MAX8907=m +CONFIG_RTC_DRV_MAX8925=m +CONFIG_RTC_DRV_MAX8998=m +CONFIG_RTC_DRV_MAX8997=m +CONFIG_RTC_DRV_MAX77686=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_ISL12057=m +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_PCF8523=m +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_TWL4030=m +CONFIG_RTC_DRV_TPS6586X=m +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV3029C2=m +CONFIG_RTC_DRV_S5M=m + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_DA9055=m +CONFIG_RTC_DRV_DA9063=m +CONFIG_RTC_DRV_STK17TA8=m +CONFIG_RTC_DRV_M48T86=m +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m +CONFIG_RTC_DRV_DS2404=m +CONFIG_RTC_DRV_WM831X=m +CONFIG_RTC_DRV_WM8350=m +CONFIG_RTC_DRV_PCF50633=m +CONFIG_RTC_DRV_AB3100=m + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_MC13XXX=m +CONFIG_RTC_DRV_MOXART=m +CONFIG_RTC_DRV_XGENE=m + +# +# HID Sensor RTC drivers +# +CONFIG_RTC_DRV_HID_SENSOR_TIME=m +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +# CONFIG_INTEL_MID_DMAC is not set +# CONFIG_INTEL_IOATDMA is not set +CONFIG_DW_DMAC_CORE=m +CONFIG_DW_DMAC=m +CONFIG_DW_DMAC_PCI=m +CONFIG_DMA_ENGINE=y +CONFIG_DMA_ACPI=y + +# +# DMA Clients +# +# CONFIG_ASYNC_TX_DMA is not set +CONFIG_DMATEST=m +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +# CONFIG_UIO_CIF is not set +# CONFIG_UIO_PDRV_GENIRQ is not set +CONFIG_UIO_DMEM_GENIRQ=m +# CONFIG_UIO_AEC is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_UIO_PCI_GENERIC is not set +# CONFIG_UIO_NETX is not set +CONFIG_UIO_MF624=m +CONFIG_VFIO_IOMMU_TYPE1=m +CONFIG_VFIO=m +CONFIG_VFIO_PCI=m +# CONFIG_VFIO_PCI_VGA is not set +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO=m + +# +# Virtio drivers +# +CONFIG_VIRTIO_PCI=m +CONFIG_VIRTIO_BALLOON=m +CONFIG_VIRTIO_MMIO=m +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set + +# +# Microsoft Hyper-V guest support +# +CONFIG_STAGING=y +# CONFIG_ET131X is not set +# CONFIG_SLICOSS is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_COMEDI is not set +# CONFIG_PANEL is not set +CONFIG_RTS5208=m +# CONFIG_RTS5208_DEBUG is not set +# CONFIG_TRANZPORT is not set +# CONFIG_IDE_PHISON is not set +CONFIG_LINE6_USB=m +# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_DX_SEP is not set + +# +# IIO staging drivers +# + +# +# Accelerometers +# + +# +# Analog to digital converters +# +CONFIG_AD7291=m + +# +# Analog digital bi-direction converters +# + +# +# Capacitance to digital converters +# +CONFIG_AD7150=m +CONFIG_AD7152=m +CONFIG_AD7746=m + +# +# Direct Digital Synthesis +# + +# +# Digital gyroscope sensors +# + +# +# Network Analyzer, Impedance Converters +# +CONFIG_AD5933=m + +# +# Light sensors +# +CONFIG_SENSORS_ISL29018=m +CONFIG_SENSORS_ISL29028=m +CONFIG_TSL2583=m +CONFIG_TSL2x7x=m + +# +# Magnetometer sensors +# +CONFIG_SENSORS_HMC5843=m + +# +# Active energy metering IC +# +CONFIG_ADE7854=m +CONFIG_ADE7854_I2C=m + +# +# Resolver to digital converters +# + +# +# Triggers - standalone +# +CONFIG_IIO_PERIODIC_RTC_TRIGGER=m +# CONFIG_IIO_SIMPLE_DUMMY is not set +# CONFIG_CRYSTALHD is not set +# CONFIG_FB_XGI is not set +# CONFIG_ACPI_QUICKSTART is not set +# CONFIG_USB_ENESTORAGE is not set +# CONFIG_BCM_WIMAX is not set +# CONFIG_FT1000 is not set + +# +# Speakup console speech +# +# CONFIG_SPEAKUP is not set +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set +CONFIG_STAGING_MEDIA=y +CONFIG_DVB_AS102=m +CONFIG_I2C_BCM2048=m +# CONFIG_DVB_CXD2099 is not set +# CONFIG_VIDEO_DT3155 is not set +# CONFIG_VIDEO_GO7007 is not set +CONFIG_VIDEO_V4L2_INT_DEVICE=m +CONFIG_VIDEO_TCM825X=m +CONFIG_USB_SN9C102=m +CONFIG_SOLO6X10=m +CONFIG_DVB_RTL2832_SDR=m +# CONFIG_LIRC_STAGING is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_USB_WPAN_HCD is not set +CONFIG_WIMAX_GDM72XX=m +# CONFIG_WIMAX_GDM72XX_QOS is not set +# CONFIG_WIMAX_GDM72XX_K_MODE is not set +# CONFIG_WIMAX_GDM72XX_WIMAX2 is not set +CONFIG_WIMAX_GDM72XX_USB=y +# CONFIG_WIMAX_GDM72XX_SDIO is not set +# CONFIG_LTE_GDM724X is not set +CONFIG_NET_VENDOR_SILICOM=y +CONFIG_SBYPASS=m +CONFIG_BPCTL=m +CONFIG_CED1401=m +CONFIG_DGRP=m +CONFIG_LUSTRE_FS=m +CONFIG_LUSTRE_OBD_MAX_IOCTL_BUFFER=8192 +# CONFIG_LUSTRE_DEBUG_EXPENSIVE_CHECK is not set +CONFIG_LUSTRE_LLITE_LLOOP=m +CONFIG_LNET=m +CONFIG_LNET_MAX_PAYLOAD=1048576 +CONFIG_LNET_SELFTEST=m +CONFIG_XILLYBUS=m +CONFIG_XILLYBUS_PCIE=m +CONFIG_DGNC=m +CONFIG_DGAP=m +CONFIG_GS_FPGABOOT=m +CONFIG_CRYPTO_SKEIN=y +CONFIG_CRYPTO_THREEFISH=y +CONFIG_X86_PLATFORM_DEVICES=y +CONFIG_ACER_WMI=m +CONFIG_ACERHDF=m +CONFIG_ALIENWARE_WMI=m +# CONFIG_ASUS_LAPTOP is not set +CONFIG_DELL_WMI=m +CONFIG_DELL_WMI_AIO=m +CONFIG_DELL_SMO8800=m +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_FUJITSU_TABLET is not set +# CONFIG_HP_ACCEL is not set +# CONFIG_HP_WIRELESS is not set +CONFIG_HP_WMI=m +# CONFIG_PANASONIC_LAPTOP is not set +# CONFIG_THINKPAD_ACPI is not set +CONFIG_SENSORS_HDAPS=m +CONFIG_INTEL_MENLOW=m +# CONFIG_EEEPC_LAPTOP is not set +CONFIG_ASUS_WMI=m +# CONFIG_ASUS_NB_WMI is not set +# CONFIG_EEEPC_WMI is not set +CONFIG_ACPI_WMI=m +CONFIG_MSI_WMI=m +# CONFIG_TOPSTAR_LAPTOP is not set +# CONFIG_ACPI_TOSHIBA is not set +CONFIG_TOSHIBA_BT_RFKILL=m +# CONFIG_ACPI_CMPC is not set +CONFIG_INTEL_IPS=m +CONFIG_IBM_RTL=m +# CONFIG_SAMSUNG_LAPTOP is not set +# CONFIG_MXM_WMI is not set +CONFIG_SAMSUNG_Q10=m +# CONFIG_APPLE_GMUX is not set +CONFIG_INTEL_RST=m +CONFIG_INTEL_SMARTCONNECT=m +CONFIG_PVPANIC=m +# CONFIG_CHROME_PLATFORMS is not set + +# +# SOC (System On Chip) specific Drivers +# + +# +# Hardware Spinlock drivers +# +CONFIG_CLKEVT_I8253=y +CONFIG_I8253_LOCK=y +CONFIG_CLKBLD_I8253=y +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +# CONFIG_MAILBOX is not set +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y +CONFIG_AMD_IOMMU=y +CONFIG_AMD_IOMMU_STATS=y +CONFIG_AMD_IOMMU_V2=m +CONFIG_DMAR_TABLE=y +CONFIG_INTEL_IOMMU=y +CONFIG_INTEL_IOMMU_DEFAULT_ON=y +CONFIG_INTEL_IOMMU_FLOPPY_WA=y +CONFIG_IRQ_REMAP=y + +# +# Remoteproc drivers +# +CONFIG_REMOTEPROC=m +CONFIG_STE_MODEM_RPROC=m + +# +# Rpmsg drivers +# +# CONFIG_PM_DEVFREQ is not set +CONFIG_EXTCON=m + +# +# Extcon Device Drivers +# +CONFIG_EXTCON_ADC_JACK=m +CONFIG_EXTCON_MAX14577=m +CONFIG_EXTCON_MAX77693=m +CONFIG_EXTCON_MAX8997=m +CONFIG_MEMORY=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +# CONFIG_IIO_BUFFER_CB is not set +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGERED_BUFFER=m +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 + +# +# Accelerometers +# +CONFIG_BMA180=m +CONFIG_HID_SENSOR_ACCEL_3D=m +CONFIG_IIO_ST_ACCEL_3AXIS=m +CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m +CONFIG_MMA8452=m + +# +# Analog to digital converters +# +CONFIG_AD799X=m +CONFIG_MAX1363=m +CONFIG_MCP3422=m +CONFIG_MEN_Z188_ADC=m +CONFIG_NAU7802=m +CONFIG_TI_ADC081C=m +CONFIG_TI_AM335X_ADC=m +CONFIG_TWL4030_MADC=m +CONFIG_TWL6030_GPADC=m +CONFIG_VIPERBOARD_ADC=m + +# +# Amplifiers +# + +# +# Hid Sensor IIO Common +# +CONFIG_HID_SENSOR_IIO_COMMON=m +CONFIG_HID_SENSOR_IIO_TRIGGER=m +CONFIG_IIO_ST_SENSORS_I2C=m +CONFIG_IIO_ST_SENSORS_CORE=m + +# +# Digital to analog converters +# +CONFIG_AD5064=m +CONFIG_AD5380=m +CONFIG_AD5446=m +CONFIG_MAX517=m +CONFIG_MCP4725=m + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# + +# +# Digital gyroscope sensors +# +CONFIG_HID_SENSOR_GYRO_3D=m +CONFIG_IIO_ST_GYRO_3AXIS=m +CONFIG_IIO_ST_GYRO_I2C_3AXIS=m +CONFIG_ITG3200=m + +# +# Humidity sensors +# +CONFIG_SI7005=m + +# +# Inertial measurement units +# +CONFIG_INV_MPU6050_IIO=m + +# +# Light sensors +# +CONFIG_ADJD_S311=m +CONFIG_APDS9300=m +CONFIG_CM32181=m +CONFIG_CM36651=m +CONFIG_GP2AP020A00F=m +CONFIG_HID_SENSOR_ALS=m +CONFIG_HID_SENSOR_PROX=m +CONFIG_SENSORS_LM3533=m +CONFIG_LTR501=m +CONFIG_TCS3472=m +CONFIG_SENSORS_TSL2563=m +CONFIG_TSL4531=m +CONFIG_VCNL4000=m + +# +# Magnetometer sensors +# +CONFIG_MAG3110=m +CONFIG_HID_SENSOR_MAGNETOMETER_3D=m +CONFIG_IIO_ST_MAGN_3AXIS=m +CONFIG_IIO_ST_MAGN_I2C_3AXIS=m + +# +# Inclinometer sensors +# +CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m + +# +# Triggers - standalone +# +CONFIG_IIO_INTERRUPT_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=m + +# +# Pressure sensors +# +CONFIG_HID_SENSOR_PRESS=m +CONFIG_MPL115=m +CONFIG_MPL3115=m +CONFIG_IIO_ST_PRESS=m +CONFIG_IIO_ST_PRESS_I2C=m + +# +# Lightning sensors +# + +# +# Temperature sensors +# +CONFIG_MLX90614=m +CONFIG_TMP006=m +CONFIG_NTB=m +# CONFIG_VME_BUS is not set +# CONFIG_PWM is not set +# CONFIG_IPACK_BUS is not set +CONFIG_RESET_CONTROLLER=y +CONFIG_FMC=m +CONFIG_FMC_FAKEDEV=m +CONFIG_FMC_TRIVIAL=m +# CONFIG_FMC_WRITE_EEPROM is not set +CONFIG_FMC_CHARDEV=m + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +CONFIG_BCM_KONA_USB2_PHY=m +CONFIG_PHY_SAMSUNG_USB2=m +CONFIG_POWERCAP=y +CONFIG_INTEL_RAPL=m +CONFIG_MCB=m +CONFIG_MCB_PCI=m + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +CONFIG_FIRMWARE_MEMMAP=y +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_DMIID=y +# CONFIG_DMI_SYSFS is not set +CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y +# CONFIG_ISCSI_IBFT_FIND is not set +# CONFIG_GOOGLE_FIRMWARE is not set + +# +# EFI (Extensible Firmware Interface) Support +# +CONFIG_EFI_VARS=y +CONFIG_EFI_RUNTIME_MAP=y +CONFIG_UEFI_CPER=y + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +CONFIG_JFS_STATISTICS=y +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +CONFIG_XFS_WARN=y +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +# CONFIG_GFS2_FS_LOCKING_DLM is not set +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_OCFS2_FS_STATS=y +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_BTRFS_FS_CHECK_INTEGRITY=y +CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y +# CONFIG_BTRFS_DEBUG is not set +CONFIG_BTRFS_ASSERT=y +CONFIG_NILFS2_FS=m +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_QUOTACTL_COMPAT=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +CONFIG_FSCACHE_HISTOGRAM=y +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +# CONFIG_CACHEFILES is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +# CONFIG_ECRYPT_FS_MESSAGING is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_HFSPLUS_FS_POSIX_ACL=y +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_LOGFS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y +CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m +# CONFIG_QNX6FS_DEBUG is not set +CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_PSTORE is not set +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +CONFIG_UFS_FS_WRITE=y +# CONFIG_UFS_DEBUG is not set +CONFIG_F2FS_FS=m +CONFIG_F2FS_STAT_FS=y +CONFIG_F2FS_FS_XATTR=y +CONFIG_F2FS_FS_POSIX_ACL=y +CONFIG_F2FS_FS_SECURITY=y +CONFIG_F2FS_CHECK_FS=y +CONFIG_EFIVAR_FS=m +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V2=m +CONFIG_NFS_V3=m +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=m +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=m +CONFIG_PNFS_BLOCK=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +CONFIG_NFS_V4_1_MIGRATION=y +CONFIG_NFS_V4_SECURITY_LABEL=y +# CONFIG_NFS_FSCACHE is not set +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_V4_SECURITY_LABEL=y +# CONFIG_NFSD_FAULT_INJECTION is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +CONFIG_CIFS_WEAK_PW_HASH=y +# CONFIG_CIFS_UPCALL is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DEBUG=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set +CONFIG_CIFS_SMB2=y +CONFIG_CIFS_FSCACHE=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_NLS_UTF8=y +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DYNAMIC_DEBUG is not set + +# +# Compile-time checks and compiler options +# +# CONFIG_DEBUG_INFO is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_VIRTUAL is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_ARCH_KMEMCHECK=y +# CONFIG_KMEMCHECK is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +# CONFIG_LOCKUP_DETECTOR is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_SCHED_DEBUG is not set +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_LOCK_TORTURE_TEST=m +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_SPARSE_RCU_POINTER is not set +CONFIG_TORTURE_TEST=m +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_RCU_CPU_STALL_INFO is not set +# CONFIG_RCU_TRACE is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +CONFIG_NOTIFIER_ERROR_INJECTION=m +# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set +CONFIG_PM_NOTIFIER_ERROR_INJECT=m +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y +# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set +CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_FENTRY=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACE_CLOCK=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_FTRACE_SYSCALLS is not set +# CONFIG_TRACER_SNAPSHOT is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KPROBE_EVENT=y +CONFIG_UPROBE_EVENT=y +CONFIG_PROBE_EVENTS=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set +# CONFIG_TRACEPOINT_BENCHMARK is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_RING_BUFFER_STARTUP_TEST is not set + +# +# Runtime Testing +# +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +CONFIG_RBTREE_TEST=m +CONFIG_INTERVAL_TREE_TEST=m +CONFIG_PERCPU_TEST=m +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_TEST_STRING_HELPERS=m +# CONFIG_TEST_KSTRTOX is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_DMA_API_DEBUG is not set +CONFIG_TEST_MODULE=m +CONFIG_TEST_USER_COPY=m +CONFIG_TEST_BPF=m +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_STRICT_DEVMEM is not set +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_EARLY_PRINTK=y +CONFIG_EARLY_PRINTK_DBGP=y +# CONFIG_EARLY_PRINTK_EFI is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +# CONFIG_DEBUG_RODATA_TEST is not set +# CONFIG_DEBUG_SET_MODULE_RONX is not set +CONFIG_DEBUG_NX_TEST=m +CONFIG_DOUBLEFAULT=y +# CONFIG_DEBUG_TLBFLUSH is not set +# CONFIG_IOMMU_DEBUG is not set +# CONFIG_IOMMU_STRESS is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y +# CONFIG_X86_DECODER_SELFTEST is not set +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_NMI_SELFTEST is not set +# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_PERSISTENT_KEYRINGS is not set +CONFIG_BIG_KEYS=y +CONFIG_ENCRYPTED_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_INTEL_TXT is not set +CONFIG_LSM_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_YAMA is not set +CONFIG_INTEGRITY=y +# CONFIG_INTEGRITY_SIGNATURE is not set +CONFIG_INTEGRITY_AUDIT=y +# CONFIG_IMA is not set +CONFIG_EVM=y + +# +# EVM options +# +CONFIG_EVM_ATTR_FSUUID=y +CONFIG_DEFAULT_SECURITY_SELINUX=y +# CONFIG_DEFAULT_SECURITY_DAC is not set +CONFIG_DEFAULT_SECURITY="selinux" +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_USER=m +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ABLK_HELPER=m +CONFIG_CRYPTO_GLUE_HELPER_X86=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRC32C_INTEL=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_CRC32_PCLMUL=m +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA1_SSSE3=m +CONFIG_CRYPTO_SHA256_SSSE3=m +CONFIG_CRYPTO_SHA512_SSSE3=m +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_AES_X86_64=m +CONFIG_CRYPTO_AES_NI_INTEL=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_BLOWFISH_X86_64=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAMELLIA_X86_64=m +CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m +CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m +CONFIG_CRYPTO_CAST_COMMON=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST5_AVX_X86_64=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_CAST6_AVX_X86_64=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SALSA20_X86_64=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m +CONFIG_CRYPTO_SERPENT_AVX_X86_64=m +CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_TWOFISH_X86_64=m +CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m +CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_USER_API=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_PADLOCK is not set +# CONFIG_CRYPTO_DEV_CCP is not set +CONFIG_ASYMMETRIC_KEY_TYPE=m +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m +CONFIG_PUBLIC_KEY_ALGO_RSA=m +CONFIG_X509_CERTIFICATE_PARSER=m +CONFIG_HAVE_KVM=y +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_APIC_ARCHITECTURE=y +CONFIG_KVM_MMIO=y +CONFIG_KVM_ASYNC_PF=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=m +# CONFIG_KVM_INTEL is not set +CONFIG_KVM_AMD=m +# CONFIG_KVM_MMU_AUDIT is not set +CONFIG_KVM_DEVICE_ASSIGNMENT=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_PERCPU_RWSEM=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_CRC8=m +# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_COMPRESS=m +CONFIG_LZ4HC_COMPRESS=m +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_XZ_DEC_TEST=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_INTERVAL_TREE=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_CHECK_SIGNATURE=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_NLATTR=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_LRU_CACHE=m +CONFIG_AVERAGE=y +CONFIG_CLZ_TAB=y +CONFIG_CORDIC=m +CONFIG_DDR=y +CONFIG_MPILIB=m +CONFIG_OID_REGISTRY=m +CONFIG_UCS2_STRING=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y diff --git a/krb5.conf.example b/krb5.conf.example index 210348fa..9d250bfa 100644 --- a/krb5.conf.example +++ b/krb5.conf.example @@ -4,22 +4,15 @@ [realms] # use "kdc = ..." if realm admins haven't put SRV records into DNS ATHENA.MIT.EDU = { - admin_server = KERBEROS.MIT.EDU - default_domain = MIT.EDU - v4_instance_convert = { - mit = mit.edu - lithium = lithium.lcs.mit.edu - } + admin_server = kerberos.mit.edu } ANDREW.CMU.EDU = { - admin_server = vice28.fs.andrew.cmu.edu + admin_server = kdc-01.andrew.cmu.edu } [domain_realm] - .mit.edu = ATHENA.MIT.EDU mit.edu = ATHENA.MIT.EDU - .media.mit.edu = MEDIA-LAB.MIT.EDU - media.mit.edu = MEDIA-LAB.MIT.EDU + csail.mit.edu = CSAIL.MIT.EDU .ucsc.edu = CATS.UCSC.EDU [logging] diff --git a/ld.so.conf.d/05gcc-x86_64-pc-linux-gnu.conf b/ld.so.conf.d/05gcc-x86_64-pc-linux-gnu.conf index d3bfa951..ed17d3e6 100644 --- a/ld.so.conf.d/05gcc-x86_64-pc-linux-gnu.conf +++ b/ld.so.conf.d/05gcc-x86_64-pc-linux-gnu.conf @@ -1,2 +1,2 @@ -/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3/32 -/usr/lib/gcc/x86_64-pc-linux-gnu/4.7.3 +/usr/lib/gcc/x86_64-pc-linux-gnu/4.8.3/32 +/usr/lib/gcc/x86_64-pc-linux-gnu/4.8.3 diff --git a/libvirt/libvirt-guests.conf b/libvirt/libvirt-guests.conf new file mode 100644 index 00000000..0863832e --- /dev/null +++ b/libvirt/libvirt-guests.conf @@ -0,0 +1,48 @@ +# +# Warning: This configuration file is only sourced by the systemd +# libvirt-guests.service unit. The coresponding openrc facility is in +# /etc/init.d/libvirtd and /etc/conf.d/libvirtd +# + + +# URIs to check for running guests +# example: URIS='default xen:/// vbox+tcp://host/system lxc:///' +#URIS=default + +# action taken on host boot +# - start all guests which were running on shutdown are started on boot +# regardless on their autostart settings +# - ignore libvirt-guests init script won't start any guest on boot, however, +# guests marked as autostart will still be automatically started by +# libvirtd +#ON_BOOT=start + +# Number of seconds to wait between each guest start. Set to 0 to allow +# parallel startup. +#START_DELAY=0 + +# action taken on host shutdown +# - suspend all running guests are suspended using virsh managedsave +# - shutdown all running guests are asked to shutdown. Please be careful with +# this settings since there is no way to distinguish between a +# guest which is stuck or ignores shutdown requests and a guest +# which just needs a long time to shutdown. When setting +# ON_SHUTDOWN=shutdown, you must also set SHUTDOWN_TIMEOUT to a +# value suitable for your guests. +#ON_SHUTDOWN=suspend + +# If set to non-zero, shutdown will suspend guests concurrently. Number of +# guests on shutdown at any time will not exceed number set in this variable. +#PARALLEL_SHUTDOWN=0 + +# Number of seconds we're willing to wait for a guest to shut down. If parallel +# shutdown is enabled, this timeout applies as a timeout for shutting down all +# guests on a single URI defined in the variable URIS. If this is 0, then there +# is no time out (use with caution, as guests might not respond to a shutdown +# request). The default value is 300 seconds (5 minutes). +#SHUTDOWN_TIMEOUT=300 + +# If non-zero, try to bypass the file system cache when saving and +# restoring guests, even though this may give slower operation for +# some file systems. +#BYPASS_CACHE=0 diff --git a/libvirt/libvirtd.conf b/libvirt/libvirtd.conf index aeba11d7..d4f6a1cc 100644 --- a/libvirt/libvirtd.conf +++ b/libvirt/libvirtd.conf @@ -48,6 +48,10 @@ # Override the default configuration which binds to all network # interfaces. This can be a numeric IPv4/6 address, or hostname # +# If the libvirtd service is started in parallel with network +# startup (e.g. with systemd), binding to addresses other than +# the wildcards (0.0.0.0/::) might not be available yet. +# #listen_addr = "192.168.0.1" @@ -73,6 +77,11 @@ # UNIX socket access controls # +# Beware that if you are changing *any* of these options, and you use +# socket activation with systemd, you need to adjust the settings in +# the libvirtd.socket file as well since it could impose a security +# risk if you rely on file permission checking only. + # Set the UNIX domain socket group ownership. This can be used to # allow a 'trusted' set of users access to management capabilities # without becoming root. @@ -305,6 +314,10 @@ # Logging level: 4 errors, 3 warnings, 2 information, 1 debug # basically 1 will log everything possible +# Note: Journald may employ rate limiting of the messages logged +# and thus lock up the libvirt daemon. To use the debug level with +# journald you have to specify it explicitly in 'log_outputs', otherwise +# only information level messages will be logged. #log_level = 3 # Logging filters: @@ -338,6 +351,8 @@ # use syslog for the output and use the given name as the ident # x:file:file_path # output to a file, with the given filepath +# x:journald +# output to journald logging system # In all case the x prefix is the minimal level, acting as a filter # 1: DEBUG # 2: INFO diff --git a/libvirt/qemu-lockd.conf b/libvirt/qemu-lockd.conf index 85edb917..fa437604 100644 --- a/libvirt/qemu-lockd.conf +++ b/libvirt/qemu-lockd.conf @@ -1,4 +1,3 @@ - # # The default lockd behaviour is to acquire locks directly # against each configured disk file / block device. If the diff --git a/libvirt/qemu.conf b/libvirt/qemu.conf index f0e802f2..c6db5689 100644 --- a/libvirt/qemu.conf +++ b/libvirt/qemu.conf @@ -274,6 +274,14 @@ # "/dev/ptmx", "/dev/kvm", "/dev/kqemu", # "/dev/rtc","/dev/hpet", "/dev/vfio/vfio" #] +# +# RDMA migration requires the following extra files to be added to the list: +# "/dev/infiniband/rdma_cm", +# "/dev/infiniband/issm0", +# "/dev/infiniband/issm1", +# "/dev/infiniband/umad0", +# "/dev/infiniband/umad1", +# "/dev/infiniband/uverbs0" # The default format for Qemu/KVM guest save images is raw; that is, the @@ -330,10 +338,17 @@ # unspecified here, determination of a host mount point in /proc/mounts # will be attempted. Specifying an explicit mount overrides detection # of the same in /proc/mounts. Setting the mount point to "" will -# disable guest hugepage backing. +# disable guest hugepage backing. If desired, multiple mount points can +# be specified at once, separated by comma and enclosed in square +# brackets, for example: +# +# hugetlbfs_mount = ["/dev/hugepages2M", "/dev/hugepages1G"] # -# NB, within this mount point, guests will create memory backing files -# in a location of $MOUNTPOINT/libvirt/qemu +# The size of huge page served by specific mount point is determined by +# libvirt at the daemon startup. +# +# NB, within these mount points, guests will create memory backing +# files in a location of $MOUNTPOINT/libvirt/qemu # #hugetlbfs_mount = "/dev/hugepages" @@ -450,10 +465,17 @@ #seccomp_sandbox = 1 - # Override the listen address for all incoming migrations. Defaults to # 0.0.0.0, or :: if both host and qemu are capable of IPv6. -#migration_address = "127.0.0.1" +#migration_address = "0.0.0.0" + + +# The default hostname or IP address which will be used by a migration +# source for transferring migration data to this host. The migration +# source has to be able to resolve this hostname and connect to it so +# setting "localhost" will not work. By default, the host's configured +# hostname is used. +#migration_host = "host.example.com" # Override the port range used for incoming migrations. @@ -465,3 +487,25 @@ # #migration_port_min = 49152 #migration_port_max = 49215 + + + +# Timestamp QEMU's log messages (if QEMU supports it) +# +# Defaults to 1. +# +#log_timestamp = 0 + + +# Location of master nvram file +# +# When a domain is configured to use UEFI instead of standard +# BIOS it may use a separate storage for UEFI variables. If +# that's the case libvirt creates the variable store per domain +# using this master file as image. Each UEFI firmware can, +# however, have different variables store. Therefore the nvram is +# a list of strings when a single item is in form of: +# ${PATH_TO_UEFI_FW}:${PATH_TO_UEFI_VARS}. +# Later, when libvirt creates per domain variable store, this +# list is searched for the master image. +#nvram = [ "/usr/share/OVMF/OVMF_CODE.fd:/usr/share/OVMF/OVMF_VARS.fd" ] diff --git a/lisp-config.lisp b/lisp-config.lisp deleted file mode 100644 index a6d36ce2..00000000 --- a/lisp-config.lisp +++ /dev/null @@ -1,3 +0,0 @@ - -(in-package common-lisp-user) - diff --git a/logrotate.d/pm-utils b/logrotate.d/pm-utils new file mode 100644 index 00000000..85de4003 --- /dev/null +++ b/logrotate.d/pm-utils @@ -0,0 +1,8 @@ +/var/log/pm-suspend.log /var/log/pm-powersave.log { + monthly + rotate 4 + delaycompress + compress + notifempty + missingok +} diff --git a/logrotate.d/ulogd b/logrotate.d/ulogd index c57583c7..787f49b6 100644 --- a/logrotate.d/ulogd +++ b/logrotate.d/ulogd @@ -1,18 +1,7 @@ -/var/log/ulogd/ulogd.log { - notifempty +/var/log/ulogd/ulogd.log /var/log/ulogd/ulogd_syslogemu.log { + sharedscripts missingok - size 1M - create 0640 ulogd - postrotate - /etc/init.d/ulogd reopen_logs > /dev/null - endscript -} - -/var/log/ulogd/ulogd_syslogemu.log { - rotate 12 - size 5M notifempty - missingok create 0640 ulogd postrotate /etc/init.d/ulogd reopen_logs > /dev/null diff --git a/lvm/lvm.conf b/lvm/lvm.conf index 4ee0b45e..b9041b10 100644 --- a/lvm/lvm.conf +++ b/lvm/lvm.conf @@ -53,11 +53,30 @@ devices { # same block device and the tools need to display a name for device, # all the pathnames are matched against each item in the following # list of regular expressions in turn and the first match is used. - preferred_names = [ ] + + # By default no preferred names are defined. + # preferred_names = [ ] # Try to avoid using undescriptive /dev/dm-N names, if present. # preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ] + # In case no prefererred name matches or if preferred_names are not + # defined at all, builtin rules are used to determine the preference. + # + # The first builtin rule checks path prefixes and it gives preference + # based on this ordering (where "dev" depends on devices/dev setting): + # /dev/mapper > /dev/disk > /dev/dm-* > /dev/block + # + # If the ordering above cannot be applied, the path with fewer slashes + # gets preference then. + # + # If the number of slashes is the same, a symlink gets preference. + # + # Finally, if all the rules mentioned above are not applicable, + # lexicographical order is used over paths and the smallest one + # of all gets preference. + + # A filter that tells LVM2 to only use a restricted set of devices. # The filter consists of an array of regular expressions. These # expressions can be delimited by a character of your choice, and @@ -84,6 +103,8 @@ devices { # lvmetad is used" comment that is attached to global/use_lvmetad setting. # By default we accept every block device: + # filter = [ "a/.*/" ] + # Gentoo: we exclude /dev/nbd by default, because it makes a lot of kernel # noise when you probed while not available. filter = [ "r|/dev/nbd.*|", "a/.*/" ] @@ -188,6 +209,35 @@ devices { # in recovery situations. ignore_suspended_devices = 0 + # ignore_lvm_mirrors: Introduced in version 2.02.104 + # This setting determines whether logical volumes of "mirror" segment + # type are scanned for LVM labels. This affects the ability of + # mirrors to be used as physical volumes. If 'ignore_lvm_mirrors' + # is set to '1', it becomes impossible to create volume groups on top + # of mirror logical volumes - i.e. to stack volume groups on mirrors. + # + # Allowing mirror logical volumes to be scanned (setting the value to '0') + # can potentially cause LVM processes and I/O to the mirror to become + # blocked. This is due to the way that the "mirror" segment type handles + # failures. In order for the hang to manifest itself, an LVM command must + # be run just after a failure and before the automatic LVM repair process + # takes place OR there must be failures in multiple mirrors in the same + # volume group at the same time with write failures occurring moments + # before a scan of the mirror's labels. + # + # Note that these scanning limitations do not apply to the LVM RAID + # types, like "raid1". The RAID segment types handle failures in a + # different way and are not subject to possible process or I/O blocking. + # + # It is encouraged that users set 'ignore_lvm_mirrors' to 1 if they + # are using the "mirror" segment type. Users that require volume group + # stacking on mirrored logical volumes should consider using the "raid1" + # segment type. The "raid1" segment type is not available for + # active/active clustered volume groups. + # + # Set to 1 to disallow stacking and thereby avoid a possible deadlock. + ignore_lvm_mirrors = 1 + # During each LVM operation errors received from each device are counted. # If the counter of a particular device exceeds the limit set here, no # further I/O is sent to that device for the remainder of the respective @@ -245,11 +295,50 @@ allocation { # algorithm. maximise_cling = 1 + # Whether to use blkid library instead of native LVM2 code to detect + # any existing signatures while creating new Physical Volumes and + # Logical Volumes. LVM2 needs to be compiled with blkid wiping support + # for this setting to take effect. + # + # LVM2 native detection code is currently able to recognize these signatures: + # - MD device signature + # - swap signature + # - LUKS signature + # To see the list of signatures recognized by blkid, check the output + # of 'blkid -k' command. The blkid can recognize more signatures than + # LVM2 native detection code, but due to this higher number of signatures + # to be recognized, it can take more time to complete the signature scan. + use_blkid_wiping = 1 + + # Set to 1 to wipe any signatures found on newly-created Logical Volumes + # automatically in addition to zeroing of the first KB on the LV + # (controlled by the -Z/--zero y option). + # The command line option -W/--wipesignatures takes precedence over this + # setting. + # The default is to wipe signatures when zeroing. + # + wipe_signatures_when_zeroing_new_lvs = 1 + # Set to 1 to guarantee that mirror logs will always be placed on # different PVs from the mirror images. This was the default # until version 2.02.85. mirror_logs_require_separate_pvs = 0 + # Set to 1 to guarantee that cache_pool metadata will always be + # placed on different PVs from the cache_pool data. + cache_pool_metadata_require_separate_pvs = 0 + + # Specify the minimal chunk size (in kiB) for cache pool volumes. + # Using a chunk_size that is too large can result in wasteful use of + # the cache, where small reads and writes can cause large sections of + # an LV to be mapped into the cache. However, choosing a chunk_size + # that is too small can result in more overhead trying to manage the + # numerous chunks that become mapped into the cache. The former is + # more of a problem than the latter in most cases, so we default to + # a value that is on the smaller end of the spectrum. Supported values + # range from 32(kiB) to 1048576 in multiples of 32. + # cache_pool_chunk_size = 64 + # Set to 1 to guarantee that thin pool metadata will always # be placed on different PVs from the pool data. thin_pool_metadata_require_separate_pvs = 0 @@ -270,14 +359,14 @@ allocation { # thin_pool_chunk_size_policy = "generic" # Specify the minimal chunk size (in KB) for thin pool volumes. - # Use of the larger chunk size may improve perfomance for plain + # Use of the larger chunk size may improve performance for plain # thin volumes, however using them for snapshot volumes is less efficient, # as it consumes more space and takes extra time for copying. # When unset, lvm tries to estimate chunk size starting from 64KB # Supported values are in range from 64 to 1048576. # thin_pool_chunk_size = 64 - # Specify discards behavior of the thin pool volume. + # Specify discards behaviour of the thin pool volume. # Select one of "ignore", "nopassdown", "passdown" # thin_pool_discards = "passdown" @@ -357,7 +446,7 @@ log { # Configuration of metadata backups and archiving. In LVM2 when we # talk about a 'backup' we mean making a copy of the metadata for the # *current* system. The 'archive' contains old metadata configurations. -# Backups are stored in a human readeable text format. +# Backups are stored in a human readable text format. backup { # Should we maintain a backup of the current metadata configuration ? @@ -417,6 +506,11 @@ global { # temporarily until you update them. si_unit_consistency = 1 + # Whether or not to display unit suffix for sizes. This setting has + # no effect if the units are in human-readable form (global/units="h") + # in which case the suffix is always displayed. + suffix = 1 + # Whether or not to communicate with the kernel device-mapper. # Set to 0 if you want to use the tools to manipulate LVM metadata # without activating any logical volumes. @@ -432,7 +526,6 @@ global { # e.g. vgscan.lvm1 and they will stop working after you start using # the new lvm2 on-disk metadata format. # The default value is set when the tools are built. - # fallback_to_lvm1 = 0 # Gentoo: the LVM tools are a seperate package. fallback_to_lvm1 = 0 @@ -451,6 +544,15 @@ global { # Type 3 uses built-in clustered locking. # Type 4 uses read-only locking which forbids any operations that might # change metadata. + # Type 5 offers dummy locking for tools that do not need any locks. + # You should not need to set this directly: the tools will select when + # to use it instead of the configured locking_type. Do not use lvmetad or + # the kernel device-mapper driver with this locking type. + # It is used by the --readonly option that offers read-only access to + # Volume Group metadata that cannot be locked safely because it belongs to + # an inaccessible domain and might be in use, for example a virtual machine + # image or a disk that is shared by a clustered machine. + # # N.B. Don't use lvmetad with locking type 3 as lvmetad is not yet # supported in clustered environment. If use_lvmetad=1 and locking_type=3 # is set at the same time, LVM always issues a warning message about this @@ -550,7 +652,7 @@ global { # "mirror" - LVM will layer the 'mirror' and 'stripe' segment types. It # will do this by creating a mirror on top of striped sub-LVs; # effectively creating a RAID 0+1 array. This is suboptimal - # in terms of providing redunancy and performance. Changing to + # in terms of providing redundancy and performance. Changing to # this setting is not advised. # Specify the '--type ' option to override this default # setting. @@ -598,7 +700,7 @@ global { # supported in clustered environment. If use_lvmetad=1 and locking_type=3 # is set at the same time, LVM always issues a warning message about this # and then it automatically disables lvmetad use. - use_lvmetad = 0 + use_lvmetad = 1 # Full path of the utility called to check that a thin metadata device # is in a state that allows it to be used. @@ -614,9 +716,11 @@ global { # Array of string options passed with thin_check command. By default, # option "-q" is for quiet output. # With thin_check version 2.1 or newer you can add "--ignore-non-fatal-errors" - # to let it pass through ignoreable errors and fix them later. + # to let it pass through ignorable errors and fix them later. + # With thin_check version 3.2 or newer you should add + # "--clear-needs-check-flag". # - # thin_check_options = [ "-q" ] + # thin_check_options = [ "-q", "--clear-needs-check-flag" ] # Full path of the utility called to repair a thin metadata device # is in a state that allows it to be used. @@ -642,8 +746,39 @@ global { # discards_non_power_2 # external_origin # metadata_resize + # external_origin_extend # # thin_disabled_features = [ "discards", "block_size" ] + + # Full path of the utility called to check that a cache metadata device + # is in a state that allows it to be used. + # Each time a cached LV needs to be used or after it is deactivated + # this utility is executed. The activation will only proceed if the utility + # has an exit status of 0. + # Set to "" to skip this check. (Not recommended.) + # The cache tools are available as part of the device-mapper-persistent-data + # package from https://github.com/jthornber/thin-provisioning-tools. + # + # cache_check_executable = "/sbin/cache_check" + + # Array of string options passed with cache_check command. By default, + # option "-q" is for quiet output. + # + # cache_check_options = [ "-q" ] + + # Full path of the utility called to repair a cache metadata device. + # Each time a cache metadata needs repair this utility is executed. + # See cache_check_executable how to obtain binaries. + # + # cache_repair_executable = "/sbin/cache_repair" + + # Array of extra string options passed with cache_repair command. + # cache_repair_options = [ "" ] + + # Full path of the utility called to dump cache metadata content. + # See cache_check_executable how to obtain binaries. + # + # cache_dump_executable = "/sbin/cache_dump" } activation { @@ -773,7 +908,7 @@ activation { # auto_set_activation_skip = 1 # For RAID or 'mirror' segment types, 'raid_region_size' is the - # size (in kiB) of each: + # size (in KiB) of each: # - synchronization operation when initializing # - each copy operation when performing a 'pvmove' (using 'mirror' segtype) # This setting has replaced 'mirror_region_size' since version 2.02.99 @@ -911,8 +1046,140 @@ activation { # are no progress reports, but the process is awoken immediately the # operation is complete. polling_interval = 15 + + # 'activation_mode' determines how Logical Volumes are activated if + # any devices are missing. Possible settings are: + # + # "complete" - Only allow activation of an LV if all of the Physical + # Volumes it uses are present. Other PVs in the Volume + # Group may be missing. + # + # "degraded" - Like "complete", but additionally RAID Logical Volumes of + # segment type raid1, raid4, raid5, radid6 and raid10 will + # be activated if there is no data loss, i.e. they have + # sufficient redundancy to present the entire addressable + # range of the Logical Volume. + # + # "partial" - Allows the activation of any Logical Volume even if + # a missing or failed PV could cause data loss with a + # portion of the Logical Volume inaccessible. + # This setting should not normally be used, but may + # sometimes assist with data recovery. + # + # This setting was introduced in LVM version 2.02.108. It corresponds + # with the '--activationmode' option for lvchange and vgchange. + activation_mode = "degraded" } +# Report settings. +# +# report { + # Align columns on report output. + # aligned=1 + + # When buffered reporting is used, the report's content is appended + # incrementally to include each object being reported until the report + # is flushed to output which normally happens at the end of command + # execution. Otherwise, if buffering is not used, each object is + # reported as soon as its processing is finished. + # buffered=1 + + # Show headings for columns on report. + # headings=1 + + # A separator to use on report after each field. + # separator=" " + + # A separator to use for list items when reported. + # list_item_separator="," + + # Use a field name prefix for each field reported. + # prefixes=0 + + # Quote field values when using field name prefixes. + # quoted=1 + + # Output each column as a row. If set, this also implies report/prefixes=1. + # colums_as_rows=0 + + # Use binary values "0" or "1" instead of descriptive literal values for + # columns that have exactly two valid values to report (not counting the + # "unknown" value which denotes that the value could not be determined). + # + # binary_values_as_numeric = 0 + + # Comma separated list of columns to sort by when reporting 'lvm devtypes' command. + # See 'lvm devtypes -o help' for the list of possible fields. + # devtypes_sort="devtype_name" + + # Comma separated list of columns to report for 'lvm devtypes' command. + # See 'lvm devtypes -o help' for the list of possible fields. + # devtypes_cols="devtype_name,devtype_max_partitions,devtype_description" + + # Comma separated list of columns to report for 'lvm devtypes' command in verbose mode. + # See 'lvm devtypes -o help' for the list of possible fields. + # devtypes_cols_verbose="devtype_name,devtype_max_partitions,devtype_description" + + # Comma separated list of columns to sort by when reporting 'lvs' command. + # See 'lvs -o help' for the list of possible fields. + # lvs_sort="vg_name,lv_name" + + # Comma separated list of columns to report for 'lvs' command. + # See 'lvs -o help' for the list of possible fields. + # lvs_cols="lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,metadata_percent,move_pv,mirror_log,copy_percent,convert_lv" + + # Comma separated list of columns to report for 'lvs' command in verbose mode. + # See 'lvs -o help' for the list of possible fields. + # lvs_cols_verbose="lv_name,vg_name,seg_count,lv_attr,lv_size,lv_major,lv_minor,lv_kernel_major,lv_kernel_minor,pool_lv,origin,data_percent,metadata_percent,move_pv,copy_percent,mirror_log,convert + + # Comma separated list of columns to sort by when reporting 'vgs' command. + # See 'vgs -o help' for the list of possible fields. + # vgs_sort="vg_name" + + # Comma separated list of columns to report for 'vgs' command. + # See 'vgs -o help' for the list of possible fields. + # vgs_cols="vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free" + + # Comma separated list of columns to report for 'vgs' command in verbose mode. + # See 'vgs -o help' for the list of possible fields. + # vgs_cols_verbose="vg_name,vg_attr,vg_extent_size,pv_count,lv_count,snap_count,vg_size,vg_free,vg_uuid,vg_profile" + + # Comma separated list of columns to sort by when reporting 'pvs' command. + # See 'pvs -o help' for the list of possible fields. + # pvs_sort="pv_name" + + # Comma separated list of columns to report for 'pvs' command. + # See 'pvs -o help' for the list of possible fields. + # pvs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free" + + # Comma separated list of columns to report for 'pvs' command in verbose mode. + # See 'pvs -o help' for the list of possible fields. + # pvs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,dev_size,pv_uuid" + + # Comma separated list of columns to sort by when reporting 'lvs --segments' command. + # See 'lvs --segments -o help' for the list of possible fields. + # segs_sort="vg_name,lv_name,seg_start" + + # Comma separated list of columns to report for 'lvs --segments' command. + # See 'lvs --segments -o help' for the list of possible fields. + # segs_cols="lv_name,vg_name,lv_attr,stripes,segtype,seg_size" + + # Comma separated list of columns to report for 'lvs --segments' command in verbose mode. + # See 'lvs --segments -o help' for the list of possible fields. + # segs_cols_verbose="lv_name,vg_name,lv_attr,seg_start,seg_size,stripes,segtype,stripesize,chunksize" + + # Comma separated list of columns to sort by when reporting 'pvs --segments' command. + # See 'pvs --segments -o help' for the list of possible fields. + # pvsegs_sort="pv_name,pvseg_start" + + # Comma separated list of columns to sort by when reporting 'pvs --segments' command. + # See 'pvs --segments -o help' for the list of possible fields. + # pvsegs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size" + + # Comma separated list of columns to sort by when reporting 'pvs --segments' command in verbose mode. + # See 'pvs --segments -o help' for the list of possible fields. + # pvsegs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size,lv_name,seg_start_pe,segtype,seg_pe_ranges" +#} #################### # Advanced section # @@ -924,8 +1191,9 @@ metadata { # Default number of copies of metadata to hold on each PV. 0, 1 or 2. # You might want to override it from the command line with 0 # when running pvcreate on new PVs which are to be added to large VGs. + # Gentoo: enable for data safety, but PV resize is then disabled. - #pvmetadatacopies = 2 + # pvmetadatacopies = 2 # Default number of copies of metadata to maintain for each VG. # If set to a non-zero value, LVM automatically chooses which of diff --git a/lvm/profile/command_profile_template.profile b/lvm/profile/command_profile_template.profile new file mode 100644 index 00000000..1f65f8d6 --- /dev/null +++ b/lvm/profile/command_profile_template.profile @@ -0,0 +1,48 @@ +# This is a command profile template for the LVM2 system. +# +# It contains all configuration settings that are customizable by command +# profiles. To create a new command profile, select the settings you want +# to customize and add them in a new file named .profile. +# Then install the new profile in a directory as defined by config/profile_dir +# setting found in /etc/lvm/lvm.conf file. +# +# Command profiles can be referenced by using the --commandprofile option then. +# +# Refer to 'man lvm.conf' for further information about profiles and +# general configuration file layout. +# +global { + units="h" + si_unit_consistency=1 + suffix=1 + lvdisplay_shows_full_device_path=0 +} +report { + aligned=1 + buffered=1 + headings=1 + separator=" " + list_item_separator="," + prefixes=0 + quoted=1 + colums_as_rows=0 + binary_values_as_numeric=0 + devtypes_sort="devtype_name" + devtypes_cols="devtype_name,devtype_max_partitions,devtype_description" + devtypes_cols_verbose="devtype_name,devtype_max_partitions,devtype_description" + lvs_sort="vg_name,lv_name" + lvs_cols="lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,metadata_percent,move_pv,mirror_log,copy_percent,convert_lv" + lvs_cols_verbose="lv_name,vg_name,seg_count,lv_attr,lv_size,lv_major,lv_minor,lv_kernel_major,lv_kernel_minor,pool_lv,origin,data_percent,metadata_percent,move_pv,copy_percent,mirror_log,convert_lv,lv_uuid,lv_profile" + vgs_sort="vg_name" + vgs_cols="vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free" + vgs_cols_verbose="vg_name,vg_attr,vg_extent_size,pv_count,lv_count,snap_count,vg_size,vg_free,vg_uuid,vg_profile" + pvs_sort="pv_name" + pvs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free" + pvs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,dev_size,pv_uuid" + segs_sort="vg_name,lv_name,seg_start" + segs_cols="lv_name,vg_name,lv_attr,stripes,segtype,seg_size" + segs_cols_verbose="lv_name,vg_name,lv_attr,seg_start,seg_size,stripes,segtype,stripesize,chunksize" + pvsegs_sort="pv_name,pvseg_start" + pvsegs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size" + pvsegs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size,lv_name,seg_start_pe,segtype,seg_pe_ranges" +} diff --git a/lvm/profile/default.profile b/lvm/profile/default.profile deleted file mode 100644 index 9c01572b..00000000 --- a/lvm/profile/default.profile +++ /dev/null @@ -1,20 +0,0 @@ -# This is a default profile for the LVM2 system. -# It contains all configuration settings that are customizable by profiles. -# -# To create a new profile, select the settings you want to customize -# and put them in a new file named .profile. Then put this -# file in a directory as defined by config/profile_dir setting found in -# /etc/lvm/lvm.conf file. -# -# Refer to 'man lvm.conf' for further information about profiles and file layout. - -allocation { - thin_pool_chunk_size = 64 - thin_pool_discards = "passdown" - thin_pool_zero = 1 -} - -activation { - thin_pool_autoextend_threshold = 100 - thin_pool_autoextend_percent = 20 -} diff --git a/lvm/profile/metadata_profile_template.profile b/lvm/profile/metadata_profile_template.profile new file mode 100644 index 00000000..e6ed73fe --- /dev/null +++ b/lvm/profile/metadata_profile_template.profile @@ -0,0 +1,24 @@ +# This is a metadata profile template for the LVM2 system. +# +# It contains all configuration settings that are customizable by metadata +# profiles. To create a new metadata profile, select the settings you want +# to customize and add them in a new file named .profile. +# Then install the new profile in a directory as defined by config/profile_dir +# setting found in /etc/lvm/lvm.conf file. +# +# Metadata profiles can be referenced by using the --metadataprofile LVM2 +# command line option. +# +# Refer to 'man lvm.conf' for further information about profiles and +# general configuration file layout. +# +allocation { + thin_pool_zero=1 + thin_pool_discards="passdown" + thin_pool_chunk_size_policy="generic" +# thin_pool_chunk_size=64 +} +activation { + thin_pool_autoextend_threshold=100 + thin_pool_autoextend_percent=20 +} diff --git a/lvm/profile/thin-generic.profile b/lvm/profile/thin-generic.profile new file mode 100644 index 00000000..229a7fc8 --- /dev/null +++ b/lvm/profile/thin-generic.profile @@ -0,0 +1,4 @@ +allocation { + thin_pool_chunk_size_policy = "generic" + thin_pool_zero = 1 +} diff --git a/modules-load.d/tun b/modules-load.d/tun new file mode 100644 index 00000000..d729999c --- /dev/null +++ b/modules-load.d/tun @@ -0,0 +1,2 @@ +tun + diff --git a/mysql/my.cnf b/mysql/my.cnf index e054133e..3303d7e6 100644 --- a/mysql/my.cnf +++ b/mysql/my.cnf @@ -1,5 +1,5 @@ # /etc/mysql/my.cnf: The global mysql configuration file. -# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.1,v 1.4 2013/01/20 02:40:02 robbat2 Exp $ +# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.5,v 1.4 2014/08/28 14:06:54 grknight Exp $ # The following options will be passed to all MySQL clients [client] @@ -52,10 +52,9 @@ socket = /var/run/mysqld/mysqld.sock pid-file = /var/run/mysqld/mysqld.pid log-error = /var/log/mysql/mysqld.err basedir = /usr -#datadir = /var/lib/mysql datadir = /data/mysql skip-external-locking -key_buffer = 16M +key_buffer_size = 16M max_allowed_packet = 1M table_cache = 64 table_open_cache = 64 @@ -64,7 +63,10 @@ net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M -language = /usr/share/mysql/german +lc_messages_dir = /usr/share/mysql +#Set this to your desired error message language +#lc_messages = en_US +lc_messages = de_DE # security: # using "localhost" in connects uses sockets by default @@ -88,10 +90,6 @@ tmpdir = /tmp/ #debug = d:t:i:o,/tmp/mysqld.trace #one-thread -# uncomment the following directives if you are using BDB tables -#bdb_cache_size = 4M -#bdb_max_lock = 10000 - # the following is the InnoDB configuration # if you wish to disable innodb instead # uncomment just the next line @@ -126,6 +124,10 @@ innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50 innodb_file_per_table +# Uncomment this to get FEDERATED engine support +#plugin-load=federated=ha_federated.so +#loose-federated + [mysqldump] quick max_allowed_packet = 16M @@ -135,16 +137,17 @@ max_allowed_packet = 16M #safe-updates [isamchk] -key_buffer = 20M +key_buffer_size = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] -key_buffer = 20M +key_buffer_size = 20M sort_buffer_size = 20M -read_buffer = 2M -write_buffer = 2M +read_buffer_size = 2M +write_buffer_size = 2M [mysqlhotcopy] interactive-timeout + diff --git a/openldap/schema/openssh-lpk.schema b/openldap/schema/openssh-lpk.schema new file mode 100644 index 00000000..5f5512a5 --- /dev/null +++ b/openldap/schema/openssh-lpk.schema @@ -0,0 +1,19 @@ +# +# LDAP Public Key Patch schema for use with openssh-ldappubkey +# Author: Eric AUGE +# +# Based on the proposal of : Mark Ruijter +# + + +# octetString SYNTAX +attributetype ( 1.3.6.1.4.1.24552.500.1.1.1.13 NAME 'sshPublicKey' + DESC 'MANDATORY: OpenSSH Public key' + EQUALITY octetStringMatch + SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 ) + +# printableString SYNTAX yes|no +objectclass ( 1.3.6.1.4.1.24552.500.1.1.2.0 NAME 'ldapPublicKey' SUP top AUXILIARY + DESC 'MANDATORY: OpenSSH LPK objectclass' + MUST ( sshPublicKey $ uid ) + ) diff --git a/openldap/schema/rfc2307bis.schema b/openldap/schema/rfc2307bis.schema index 2a2db14c..02b717df 100644 --- a/openldap/schema/rfc2307bis.schema +++ b/openldap/schema/rfc2307bis.schema @@ -4,6 +4,13 @@ # Extracted from http://tools.ietf.org/id/draft-howard-rfc2307bis-02.txt # as of 2012/05/25, by Robin H. Johnson # +# Updated on 2014/05/23 by Jorge Manuel B. S. Vicetto +# Remove extraneous "'" characters, replace SUBSTRINGS with SUBSTR, add missing +# MAY section to nisObject, drop authPassword as it's still not supported by +# openldap and add SUBSTR matching rule for memberUid. + +# Attribute Type Definitions + #attributetype ( 1.3.6.1.1.1.1.0 NAME 'uidNumber' # DESC 'An integer uniquely identifying a user in an # administrative domain' @@ -25,7 +32,7 @@ attributetype ( 1.3.6.1.1.1.1.2 NAME 'gecos' DESC 'The GECOS field; the common name' EQUALITY caseIgnoreMatch - SUBSTRINGS caseIgnoreSubstringsMatch + SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) @@ -42,7 +49,8 @@ attributetype ( 1.3.6.1.1.1.1.4 NAME 'loginShell' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) - + + attributetype ( 1.3.6.1.1.1.1.5 NAME 'shadowLastChange' EQUALITY integerMatch ORDERING integerOrderingMatch @@ -92,10 +100,9 @@ attributetype ( 1.3.6.1.1.1.1.11 NAME 'shadowFlag' SINGLE-VALUE ) - - attributetype ( 1.3.6.1.1.1.1.12 NAME 'memberUid' EQUALITY caseExactMatch + SUBSTR caseExactSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) @@ -107,7 +114,7 @@ attributetype ( 1.3.6.1.1.1.1.13 NAME 'memberNisNetgroup' attributetype ( 1.3.6.1.1.1.1.14 NAME 'nisNetgroupTriple' DESC 'Netgroup triple' EQUALITY caseIgnoreMatch - SUBSTRINGS caseIgnoreSubstringsMatch + SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 ) @@ -141,12 +148,6 @@ attributetype ( 1.3.6.1.1.1.1.18 NAME 'oncRpcNumber' SINGLE-VALUE ) - - - - - - attributetype ( 1.3.6.1.1.1.1.19 NAME 'ipHostNumber' DESC 'IPv4 addresses as a dotted decimal omitting leading zeros or IPv6 addresses as defined in RFC2373' @@ -193,13 +194,6 @@ attributetype ( 1.3.6.1.1.1.1.26 NAME 'nisMapName' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{64} ) - - - - - - - attributetype ( 1.3.6.1.1.1.1.27 NAME 'nisMapEntry' DESC 'A generic NIS entry' EQUALITY caseExactMatch @@ -248,18 +242,19 @@ attributetype ( 1.3.6.1.1.1.1.33 NAME 'automountInformation' SINGLE-VALUE ) +# Object Class Definitions objectclass ( 1.3.6.1.1.1.2.0 NAME 'posixAccount' SUP top AUXILIARY DESC 'Abstraction of an account with POSIX attributes' MUST ( cn $ uid $ uidNumber $ gidNumber $ homeDirectory ) - MAY ( authPassword $ userPassword $ loginShell $ gecos $ + MAY ( userPassword $ loginShell $ gecos $ description ) ) objectclass ( 1.3.6.1.1.1.2.1 NAME 'shadowAccount' SUP top AUXILIARY DESC 'Additional attributes for shadow passwords' MUST uid - MAY ( authPassword $ userPassword $ description $ + MAY ( userPassword $ description $ shadowLastChange $ shadowMin $ shadowMax $ shadowWarning $ shadowInactive $ shadowExpire $ shadowFlag ) ) @@ -268,7 +263,7 @@ objectclass ( 1.3.6.1.1.1.2.1 NAME 'shadowAccount' SUP top AUXILIARY objectclass ( 1.3.6.1.1.1.2.2 NAME 'posixGroup' SUP top AUXILIARY DESC 'Abstraction of a group of accounts' MUST gidNumber - MAY ( authPassword $ userPassword $ memberUid $ + MAY ( userPassword $ memberUid $ description ) ) @@ -276,8 +271,8 @@ objectclass ( 1.3.6.1.1.1.2.3 NAME 'ipService' SUP top STRUCTURAL DESC 'Abstraction an Internet Protocol service. Maps an IP port and protocol (such as tcp or udp) to one or more names; the distinguished value of - the cn attribute denotes the service's canonical - name' + the cn attribute denotes the canonical name of the + service' MUST ( cn $ ipServicePort $ ipServiceProtocol ) MAY description ) @@ -290,25 +285,22 @@ objectclass ( 1.3.6.1.1.1.2.4 NAME 'ipProtocol' SUP top STRUCTURAL MAY description ) - - - objectclass ( 1.3.6.1.1.1.2.5 NAME 'oncRpc' SUP top STRUCTURAL DESC 'Abstraction of an Open Network Computing (ONC) [RFC1057] Remote Procedure Call (RPC) binding. This class maps an ONC RPC number to a name. The distinguished value of the cn attribute denotes - the RPC service canonical name' + the canonical name of the RPC service' MUST ( cn $ oncRpcNumber ) MAY description ) objectclass ( 1.3.6.1.1.1.2.6 NAME 'ipHost' SUP top AUXILIARY DESC 'Abstraction of a host, an IP device. The distinguished - value of the cn attribute denotes the host's canonical - name. Device SHOULD be used as a structural class' + value of the cn attribute denotes the canonical name of + the host. Device SHOULD be used as a structural class' MUST ( cn $ ipHostNumber ) - MAY ( authPassword $ userPassword $ l $ description $ + MAY ( userPassword $ l $ description $ manager ) ) @@ -335,6 +327,7 @@ objectclass ( 1.3.6.1.1.1.2.9 NAME 'nisMap' SUP top STRUCTURAL objectclass ( 1.3.6.1.1.1.2.10 NAME 'nisObject' SUP top STRUCTURAL DESC 'An entry in a NIS map' MUST ( cn $ nisMapEntry $ nisMapName ) + MAY description ) objectclass ( 1.3.6.1.1.1.2.11 NAME 'ieee802Device' SUP top AUXILIARY @@ -343,9 +336,6 @@ objectclass ( 1.3.6.1.1.1.2.11 NAME 'ieee802Device' SUP top AUXILIARY MAY macAddress ) - - - objectclass ( 1.3.6.1.1.1.2.12 NAME 'bootableDevice' SUP top AUXILIARY DESC 'A device with boot parameters; device SHOULD be used as a structural class' @@ -380,7 +370,3 @@ objectclass ( 1.3.6.1.1.1.2.18 NAME 'groupOfMembers' SUP top STRUCTURAL MAY ( businessCategory $ seeAlso $ owner $ ou $ o $ description $ member ) ) - - - - diff --git a/pam.d/postgresql-9.3 b/pam.d/postgresql-9.3 deleted file mode 100644 index b94d4877..00000000 --- a/pam.d/postgresql-9.3 +++ /dev/null @@ -1,6 +0,0 @@ -# File autogenerated by pamd_mimic in pam eclass - - -auth include system-auth -account include system-auth -session include system-auth diff --git a/pango/pangox.aliases b/pango/pangox.aliases new file mode 100644 index 00000000..9b41aa75 --- /dev/null +++ b/pango/pangox.aliases @@ -0,0 +1,220 @@ +# File defining aliases of PangoFontDescription to X font set +# +# family style variant weight stretch XLFD + +sans normal normal normal normal \ + "-*-helvetica-medium-r-normal--*-*-*-*-*-*-*-*,\ + -*-gulim-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + +sans italic normal normal normal \ + "-*-helvetica-medium-o-normal--*-*-*-*-*-*-*-*,\ + -*-gulim-medium-o-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + +sans normal normal bold normal \ + "-*-helvetica-bold-r-normal--*-*-*-*-*-*-*-*,\ + -*-gulim-bold-r-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + +sans italic normal bold normal \ + "-*-helvetica-bold-o-normal--*-*-*-*-*-*-*-*,\ + -*-gulim-bold-o-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + + +serif normal normal normal normal \ + "-*-times-medium-r-normal--*-*-*-*-*-*-*-*,\ + -*-batang-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + +serif italic normal normal normal \ + "-*-times-medium-i-normal--*-*-*-*-*-*-*-*,\ + -*-batang-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + +serif normal normal bold normal \ + "-*-times-bold-r-normal--*-*-*-*-*-*-*-*,\ + -*-batang-bold-r-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + +serif italic normal bold normal \ + "-*-times-bold-i-normal--*-*-*-*-*-*-*-*,\ + -*-batang-bold-r-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + +monospace normal normal normal normal \ + "-*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -*-dotum-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + +monospace italic normal normal normal \ + "-*-fixed-medium-i-normal--*-*-*-*-*-*-*-*,\ + -*-dotum-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + +monospace normal normal bold normal \ + "-*-fixed-bold-r-normal--*-*-*-*-*-*-*-*,\ + -*-dotum-bold-r-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" + +monospace italic normal bold normal \ + "-*-fixed-bold-i-normal--*-*-*-*-*-*-*-*,\ + -*-dotum-bold-r-normal--*-*-*-*-*-*-ksc5601.1987-0,\ + -*-clearlyu-medium-r-normal--*-*-*-*-*-*-iso10646-1,\ + -*-fixed-medium-r-normal--*-*-*-*-*-*-*-*,\ + -kaist-iyagi-bold-r-normal--*-*-*-*-*-*-johab-1,\ + -*-song ti-medium-r-normal--*-*-*-*-*-*-*-*,\ + -freetype-unitamil-medium-r-normal--*-*-*-*-*-*-iso10646-tam,\ + -*-devanagari-medium-r-normal--*-*-*-*-*-*-iso10646-dev,\ + -*-gujarati-medium-r-normal--*-*-*-*-*-*-iso10646-guj,\ + -*-gurmukhi-medium-r-normal--*-*-*-*-*-*-iso10646-gur,\ + -*-bengali-medium-r-normal--*-*-*-*-*-*-iso10646-bng,\ + -*-kannada-medium-r-normal--*-*-*-*-*-*-iso10646-kan,\ + -*-burmese-medium-r-normal--*-*-*-*-*-*-iso10646-brm,\ + -*-buginese-medium-r-normal--*-*-*-*-*-*-iso10646-bgn,\ + -*-oriya-medium-r-normal--*-*-*-*-*-*-iso10646-ori,\ + -daewoo-mincho-medium-r-normal--*-*-*-*-*-*-ksc5601.1987-0" diff --git a/passwd b/passwd index e712e3f6..7fd3f711 100644 --- a/passwd +++ b/passwd @@ -58,3 +58,7 @@ qemu:x:77:77:added by portage for libvirt:/dev/null:/sbin/nologin colord:x:120:983:added by portage for colord:/var/lib/colord:/sbin/nologin geoclue:x:121:982:added by portage for geoclue:/var/lib/geoclue:/sbin/nologin dhcp:x:122:979:added by portage for dhcp:/var/lib/dhcp:/sbin/nologin +systemd-bus-proxy:x:124:977:added by portage for systemd:/dev/null:/sbin/nologin +systemd-network:x:125:976:added by portage for systemd:/dev/null:/sbin/nologin +systemd-resolve:x:126:975:added by portage for systemd:/dev/null:/sbin/nologin +systemd-timesync:x:127:974:added by portage for systemd:/dev/null:/sbin/nologin diff --git a/passwd- b/passwd- index 3347d803..cfc4cc17 100644 --- a/passwd- +++ b/passwd- @@ -57,3 +57,7 @@ ulogd:x:119:985:added by portage for ulogd:/var/log/ulogd:/sbin/nologin qemu:x:77:77:added by portage for libvirt:/dev/null:/sbin/nologin colord:x:120:983:added by portage for colord:/var/lib/colord:/sbin/nologin geoclue:x:121:982:added by portage for geoclue:/var/lib/geoclue:/sbin/nologin +dhcp:x:122:979:added by portage for dhcp:/var/lib/dhcp:/sbin/nologin +systemd-bus-proxy:x:124:977:added by portage for systemd:/dev/null:/sbin/nologin +systemd-network:x:125:976:added by portage for systemd:/dev/null:/sbin/nologin +systemd-resolve:x:126:975:added by portage for systemd:/dev/null:/sbin/nologin diff --git a/php/apache2-php5.3/php.ini b/php/apache2-php5.3/php.ini deleted file mode 100644 index 24e78a6c..00000000 --- a/php/apache2-php5.3/php.ini +++ /dev/null @@ -1,1918 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About php.ini ; -;;;;;;;;;;;;;;;;;;; -; PHP's initialization file, generally called php.ini, is responsible for -; configuring many of the aspects of PHP's behavior. - -; PHP attempts to find and load this configuration from a number of locations. -; The following is a summary of its search order: -; 1. SAPI module specific location. -; 2. The PHPRC environment variable. (As of PHP 5.2.0) -; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) -; 4. Current working directory (except CLI) -; 5. The web server's directory (for SAPI modules), or directory of PHP -; (otherwise in Windows) -; 6. The directory from the --with-config-file-path compile time option, or the -; Windows directory (C:\windows or C:\winnt) -; See the PHP docs for more specific information. -; http://php.net/configuration.file - -; The syntax of the file is extremely simple. Whitespace and lines -; beginning with a semicolon are silently ignored (as you probably guessed). -; Section headers (e.g. [Foo]) are also silently ignored, even though -; they might mean something in the future. - -; Directives following the section heading [PATH=/www/mysite] only -; apply to PHP files in the /www/mysite directory. Directives -; following the section heading [HOST=www.example.com] only apply to -; PHP files served from www.example.com. Directives set in these -; special sections cannot be overridden by user-defined INI files or -; at runtime. Currently, [PATH=] and [HOST=] sections only work under -; CGI/FastCGI. -; http://php.net/ini.sections - -; Directives are specified using the following syntax: -; directive = value -; Directive names are *case sensitive* - foo=bar is different from FOO=bar. -; Directives are variables used to configure PHP or PHP extensions. -; There is no name validation. If PHP can't find an expected -; directive because it is not set or is mistyped, a default value will be used. - -; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one -; of the INI constants (On, Off, True, False, Yes, No and None) or an expression -; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a -; previously set variable or directive (e.g. ${foo}) - -; Expressions in the INI file are limited to bitwise operators and parentheses: -; | bitwise OR -; ^ bitwise XOR -; & bitwise AND -; ~ bitwise NOT -; ! boolean NOT - -; Boolean flags can be turned on using the values 1, On, True or Yes. -; They can be turned off using the values 0, Off, False or No. - -; An empty string can be denoted by simply not writing anything after the equal -; sign, or by using the None keyword: - -; foo = ; sets foo to an empty string -; foo = None ; sets foo to an empty string -; foo = "None" ; sets foo to the string 'None' - -; If you use constants in your value, and these constants belong to a -; dynamically loaded extension (either a PHP extension or a Zend extension), -; you may only use these constants *after* the line that loads the extension. - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; PHP comes packaged with two INI files. One that is recommended to be used -; in production environments and one that is recommended to be used in -; development environments. - -; php.ini-production contains settings which hold security, performance and -; best practices at its core. But please be aware, these settings may break -; compatibility with older or less security conscience applications. We -; recommending using the production ini in production and testing environments. - -; php.ini-development is very similar to its production variant, except it's -; much more verbose when it comes to errors. We recommending using the -; development version only in development environments as errors shown to -; application users can inadvertently leak otherwise secure information. - -;;;;;;;;;;;;;;;;;;; -; Quick Reference ; -;;;;;;;;;;;;;;;;;;; -; The following are all the settings which are different in either the production -; or development versions of the INIs with respect to PHP's default behavior. -; Please see the actual settings later in the document for more details as to why -; we recommend these changes in PHP's behavior. - -; allow_call_time_pass_reference -; Default Value: On -; Development Value: Off -; Production Value: Off - -; display_errors -; Default Value: On -; Development Value: On -; Production Value: Off - -; display_startup_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; error_reporting -; Default Value: E_ALL & ~E_NOTICE -; Development Value: E_ALL | E_STRICT -; Production Value: E_ALL & ~E_DEPRECATED - -; html_errors -; Default Value: On -; Development Value: On -; Production value: Off - -; log_errors -; Default Value: Off -; Development Value: On -; Production Value: On - -; magic_quotes_gpc -; Default Value: On -; Development Value: Off -; Production Value: Off - -; max_input_time -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) - -; output_buffering -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 - -; register_argc_argv -; Default Value: On -; Development Value: Off -; Production Value: Off - -; register_long_arrays -; Default Value: On -; Development Value: Off -; Production Value: Off - -; request_order -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" - -; session.bug_compat_42 -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.bug_compat_warn -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.gc_divisor -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 - -; session.hash_bits_per_character -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 - -; short_open_tag -; Default Value: On -; Development Value: Off -; Production Value: Off - -; track_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; url_rewriter.tags -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" - -; variables_order -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS" - -;;;;;;;;;;;;;;;;;;;; -; php.ini Options ; -;;;;;;;;;;;;;;;;;;;; -; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" -;user_ini.filename = ".user.ini" - -; To disable this feature set this option to empty value -;user_ini.filename = - -; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) -;user_ini.cache_ttl = 300 - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -; http://php.net/engine -engine = On - -; This directive determines whether or not PHP will recognize code between -; tags as PHP source which should be processed as such. It's been -; recommended for several years that you not use the short tag "short cut" and -; instead to use the full tag combination. With the wide spread use -; of XML and use of these tags by other languages, the server can become easily -; confused and end up parsing the wrong code in the wrong context. But because -; this short cut has been a feature for such a long time, it's currently still -; supported for backwards compatibility, but we recommend you don't use them. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/short-open-tag -short_open_tag = Off - -; Allow ASP-style <% %> tags. -; http://php.net/asp-tags -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -; http://php.net/precision -precision = 14 - -; Enforce year 2000 compliance (will cause problems with non-compliant browsers) -; http://php.net/y2k-compliance -y2k_compliance = On - -; Output buffering is a mechanism for controlling how much output data -; (excluding headers and cookies) PHP should keep internally before pushing that -; data to the client. If your application's output exceeds this setting, PHP -; will send that data in chunks of roughly the size you specify. -; Turning on this setting and managing its maximum buffer size can yield some -; interesting side-effects depending on your application and web server. -; You may be able to send headers and cookies after you've already sent output -; through print or echo. You also may see performance benefits if your server is -; emitting less packets due to buffered output versus PHP streaming the output -; as it gets it. On production servers, 4096 bytes is a good setting for performance -; reasons. -; Note: Output buffering can also be controlled via Output Buffering Control -; functions. -; Possible Values: -; On = Enabled and buffer is unlimited. (Use with caution) -; Off = Disabled -; Integer = Enables the buffer and sets its maximum size in bytes. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 -; http://php.net/output-buffering -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -; http://php.net/output-handler -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few hundreds bytes each as a result of -; compression. If you prefer a larger chunk size for better -; performance, enable output_buffering in addition. -; Note: You need to use zlib.output_handler instead of the standard -; output_handler, or otherwise the output will be corrupted. -; http://php.net/zlib.output-compression -zlib.output_compression = Off - -; http://php.net/zlib.output-compression-level -;zlib.output_compression_level = -1 - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -; http://php.net/zlib.output-handler -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -; http://php.net/implicit-flush -; Note: This directive is hardcoded to On for the CLI SAPI -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instantiated. A warning appears if the specified function is -; not defined, or if the function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func = - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 17 - -; This directive allows you to enable and disable warnings which PHP will issue -; if you pass a value by reference at function call time. Passing values by -; reference at function call time is a deprecated feature which will be removed -; from PHP at some point in the near future. The acceptable method for passing a -; value by reference to a function is by declaring the reference in the functions -; definition, not at call time. This directive does not disable this feature, it -; only determines whether PHP will warn you about it or not. These warnings -; should enabled in development environments only. -; Default Value: On (Suppress warnings) -; Development Value: Off (Issue warnings) -; Production Value: Off (Issue warnings) -; http://php.net/allow-call-time-pass-reference -allow_call_time_pass_reference = Off - -; Safe Mode -; http://php.net/safe-mode -safe_mode = Off - -; By default, Safe Mode does a UID compare check when -; opening files. If you want to relax this to a GID compare, -; then turn on safe_mode_gid. -; http://php.net/safe-mode-gid -safe_mode_gid = Off - -; When safe_mode is on, UID/GID checks are bypassed when -; including files from this directory and its subdirectories. -; (directory must also be in include_path or full path must -; be used when including) -; http://php.net/safe-mode-include-dir -safe_mode_include_dir = - -; When safe_mode is on, only executables located in the safe_mode_exec_dir -; will be allowed to be executed via the exec family of functions. -; http://php.net/safe-mode-exec-dir -safe_mode_exec_dir = - -; Setting certain environment variables may be a potential security breach. -; This directive contains a comma-delimited list of prefixes. In Safe Mode, -; the user may only alter environment variables whose names begin with the -; prefixes supplied here. By default, users will only be able to set -; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). -; Note: If this directive is empty, PHP will let the user modify ANY -; environment variable! -; http://php.net/safe-mode-allowed-env-vars -safe_mode_allowed_env_vars = PHP_ - -; This directive contains a comma-delimited list of environment variables that -; the end user won't be able to change using putenv(). These variables will be -; protected even if safe_mode_allowed_env_vars is set to allow to change them. -; http://php.net/safe-mode-protected-env-vars -safe_mode_protected_env_vars = LD_LIBRARY_PATH - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/open-basedir -;open_basedir = - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-functions -disable_functions = - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-classes -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; would work. -; http://php.net/syntax-highlighting -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.bg = #FFFFFF -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long requests, which may end up -; being interrupted by the user or a browser timing out. PHP's default behavior -; is to disable this feature. -; http://php.net/ignore-user-abort -;ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; http://php.net/realpath-cache-size -;realpath_cache_size = 16k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; http://php.net/realpath-cache-ttl -;realpath_cache_ttl = 120 - -; Enables or disables the circular reference collector. -; http://php.net/zend.enable-gc -zend.enable_gc = On - -;;;;;;;;;;;;;;;;; -; Miscellaneous ; -;;;;;;;;;;;;;;;;; - -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -; http://php.net/expose-php -expose_php = On - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -; Maximum execution time of each script, in seconds -; http://php.net/max-execution-time -; Note: This directive is hardcoded to 0 for the CLI SAPI -max_execution_time = 30 - -; Maximum amount of time each script may spend parsing request data. It's a good -; idea to limit this time on productions servers in order to eliminate unexpectedly -; long running scripts. -; Note: This directive is hardcoded to -1 for the CLI SAPI -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) -; http://php.net/max-input-time -max_input_time = 60 - -; Maximum input variable nesting level -; http://php.net/max-input-nesting-level -;max_input_nesting_level = 64 - -; How many GET/POST/COOKIE input variables may be accepted -; max_input_vars = 1000 - -; Maximum amount of memory a script may consume (128MB) -; http://php.net/memory-limit -memory_limit = 128M - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; This directive informs PHP of which errors, warnings and notices you would like -; it to take action for. The recommended way of setting values for this -; directive is through the use of the error level constants and bitwise -; operators. The error level constants are below here for convenience as well as -; some common settings and their meanings. -; By default, PHP is set to take action on all errors, notices and warnings EXCEPT -; those related to E_NOTICE and E_STRICT, which together cover best practices and -; recommended coding standards in PHP. For performance reasons, this is the -; recommend error reporting setting. Your production server shouldn't be wasting -; resources complaining about best practices and coding standards. That's what -; development servers and development settings are for. -; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This -; means it pretty much reports everything which is exactly what you want during -; development and early testing. -; -; Error Level Constants: -; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; E_DEPRECATED - warn about code that will not work in future versions -; of PHP -; E_USER_DEPRECATED - user-generated deprecation warnings -; -; Common Values: -; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.) -; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices) -; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) -; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.) -; Default Value: E_ALL & ~E_NOTICE -; Development Value: E_ALL | E_STRICT -; Production Value: E_ALL & ~E_DEPRECATED -; http://php.net/error-reporting -error_reporting = E_ALL | E_STRICT - -; This directive controls whether or not and where PHP will output errors, -; notices and warnings too. Error output is very useful during development, but -; it could be very dangerous in production environments. Depending on the code -; which is triggering the error, sensitive information could potentially leak -; out of your application such as database usernames and passwords or worse. -; It's recommended that errors be logged on production servers rather than -; having the errors sent to STDOUT. -; Possible Values: -; Off = Do not display any errors -; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout = Display errors to STDOUT -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/display-errors -display_errors = On - -; The display of errors which occur during PHP's startup sequence are handled -; separately from display_errors. PHP's default behavior is to suppress those -; errors from clients. Turning the display of startup errors on can be useful in -; debugging configuration problems. But, it's strongly recommended that you -; leave this setting off on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/display-startup-errors -display_startup_errors = On - -; Besides displaying errors, PHP can also log errors to locations such as a -; server-specific log, STDERR, or a location specified by the error_log -; directive found below. While errors should not be displayed on productions -; servers they should still be monitored and logging is a great way to do that. -; Default Value: Off -; Development Value: On -; Production Value: On -; http://php.net/log-errors -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -; http://php.net/log-errors-max-len -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line unless ignore_repeated_source is set true. -; http://php.net/ignore-repeated-errors -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -; http://php.net/ignore-repeated-source -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -; http://php.net/report-memleaks -report_memleaks = On - -; This setting is on by default. -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). Setting this value -; to On can assist in debugging and is appropriate for development servers. It should -; however be disabled on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/track-errors -track_errors = On - -; Turn off normal error reporting and emit XML-RPC error XML -; http://php.net/xmlrpc-errors -;xmlrpc_errors = 0 - -; An XML-RPC faultCode -;xmlrpc_error_number = 0 - -; When PHP displays or logs an error, it has the capability of inserting html -; links to documentation related to that error. This directive controls whether -; those HTML links appear in error messages or not. For performance and security -; reasons, it's recommended you disable this on production servers. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: On -; Development Value: On -; Production value: Off -; http://php.net/html-errors -html_errors = On - -; If html_errors is set On PHP produces clickable error messages that direct -; to a page describing the error or function causing the error in detail. -; You can download a copy of the PHP manual from http://php.net/docs -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. PHP's default behavior is to leave these settings empty. -; Note: Never use this feature for production boxes. -; http://php.net/docref-root -; Examples -;docref_root = "/phpmanual/" - -; http://php.net/docref-ext -;docref_ext = .html - -; String to output before an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-prepend-string -; Example: -;error_prepend_string = "" - -; String to output after an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-append-string -; Example: -;error_append_string = "" - -; Log errors to specified file. PHP's default behavior is to leave this value -; empty. -; http://php.net/error-log -; Example: -;error_log = php_errors.log -; Log errors to syslog (Event Log on NT, not valid in Windows 95). -;error_log = syslog - -;windows.show_crt_warning -; Default value: 0 -; Development value: 0 -; Production value: 0 - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; - -; The separator used in PHP generated URLs to separate arguments. -; PHP's default setting is "&". -; http://php.net/arg-separator.output -; Example: -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; PHP's default setting is "&". -; NOTE: Every character in this directive is considered as separator! -; http://php.net/arg-separator.input -; Example: -;arg_separator.input = ";&" - -; This directive determines which super global arrays are registered when PHP -; starts up. If the register_globals directive is enabled, it also determines -; what order variables are populated into the global space. G,P,C,E & S are -; abbreviations for the following respective super globals: GET, POST, COOKIE, -; ENV and SERVER. There is a performance penalty paid for the registration of -; these arrays and because ENV is not as commonly used as the others, ENV is -; is not recommended on productions servers. You can still get access to -; the environment variables through getenv() should you need to. -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS"; -; http://php.net/variables-order -variables_order = "GPCS" - -; This directive determines which super global data (G,P,C,E & S) should -; be registered into the super global array REQUEST. If so, it also determines -; the order in which that data is registered. The values for this directive are -; specified in the same manner as the variables_order directive, EXCEPT one. -; Leaving this value empty will cause PHP to use the value set in the -; variables_order directive. It does not mean it will leave the super globals -; array REQUEST empty. -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" -; http://php.net/request-order -request_order = "GP" - -; Whether or not to register the EGPCS variables as global variables. You may -; want to turn this off if you don't want to clutter your scripts' global scope -; with user data. -; You should do your best to write your scripts so that they do not require -; register_globals to be on; Using form variables as globals can easily lead -; to possible security problems, if the code is not very well thought of. -; http://php.net/register-globals -register_globals = Off - -; Determines whether the deprecated long $HTTP_*_VARS type predefined variables -; are registered by PHP or not. As they are deprecated, we obviously don't -; recommend you use them. They are on by default for compatibility reasons but -; they are not recommended on production servers. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-long-arrays -register_long_arrays = Off - -; This directive determines whether PHP registers $argv & $argc each time it -; runs. $argv contains an array of all the arguments passed to PHP when a script -; is invoked. $argc contains an integer representing the number of arguments -; that were passed when the script was invoked. These arrays are extremely -; useful when running scripts from the command line. When this directive is -; enabled, registering these variables consumes CPU cycles and memory each time -; a script is executed. For performance reasons, this feature should be disabled -; on production servers. -; Note: This directive is hardcoded to On for the CLI SAPI -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-argc-argv -register_argc_argv = Off - -; When enabled, the SERVER and ENV variables are created when they're first -; used (Just In Time) instead of when the script starts. If these variables -; are not used within a script, having this directive on will result in a -; performance gain. The PHP directives register_globals, register_long_arrays, -; and register_argc_argv must be disabled for this directive to have any affect. -; http://php.net/auto-globals-jit -auto_globals_jit = On - -; Maximum size of POST data that PHP will accept. -; http://php.net/post-max-size -post_max_size = 8M - -; Magic quotes are a preprocessing feature of PHP where PHP will attempt to -; escape any character sequences in GET, POST, COOKIE and ENV data which might -; otherwise corrupt data being placed in resources such as databases before -; making that data available to you. Because of character encoding issues and -; non-standard SQL implementations across many databases, it's not currently -; possible for this feature to be 100% accurate. PHP's default behavior is to -; enable the feature. We strongly recommend you use the escaping mechanisms -; designed specifically for the database your using instead of relying on this -; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is -; removed in PHP 5.4. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/magic-quotes-gpc -magic_quotes_gpc = Off - -; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. -; http://php.net/magic-quotes-runtime -magic_quotes_runtime = Off - -; Use Sybase-style magic quotes (escape ' with '' instead of \'). -; http://php.net/magic-quotes-sybase -magic_quotes_sybase = Off - -; Automatically add files before PHP document. -; http://php.net/auto-prepend-file -auto_prepend_file = - -; Automatically add files after PHP document. -; http://php.net/auto-append-file -auto_append_file = - -; By default, PHP will output a character encoding using -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -; http://php.net/default-mimetype -default_mimetype = "text/html" - -; PHP's default character set is set to empty. -; http://php.net/default-charset -;default_charset = "iso-8859-1" - -; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is -; to disable this feature. -; http://php.net/always-populate-raw-post-data -;always_populate_raw_post_data = On - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -include_path = ".:/usr/share/php5:/usr/share/php" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" -; -; PHP's default setting for include_path is ".;/path/to/php/pear" -; http://php.net/include-path - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -; http://php.net/doc-root -doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -; http://php.net/user-dir -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; http://php.net/extension-dir -; extension_dir = "./" -; On windows: -; extension_dir = "ext" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -; http://php.net/enable-dl -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; http://php.net/cgi.force-redirect -;cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. PHP's default behavior is to disable this feature. -;cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; http://php.net/cgi.redirect-status-env -;cgi.redirect_status_env = - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; http://php.net/cgi.fix-pathinfo -;cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; http://php.net/fastcgi.impersonate -;fastcgi.impersonate = 1 - -; Disable logging through FastCGI connection. PHP's default behavior is to enable -; this feature. -;fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -; http://php.net/cgi.rfc2616-headers -;cgi.rfc2616_headers = 0 - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -; http://php.net/file-uploads -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -; http://php.net/upload-tmp-dir -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -; http://php.net/upload-max-filesize -upload_max_filesize = 2M - -; Maximum number of files that can be uploaded via a single request -max_file_uploads = 20 - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-fopen -allow_url_fopen = On - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-include -allow_url_include = Off - -; Define the anonymous ftp password (your email address). PHP's default setting -; for this is empty. -; http://php.net/from -;from="john@doe.com" - -; Define the User-Agent string. PHP's default setting for this is empty. -; http://php.net/user-agent -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -; http://php.net/default-socket-timeout -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; http://php.net/auto-detect-line-endings -;auto_detect_line_endings = Off - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; - -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, on Windows: -; -; extension=msql.dll -; -; ... or under UNIX: -; -; extension=msql.so -; -; ... or with a path: -; -; extension=/path/to/extension/msql.so -; -; If you only provide the name of the extension, PHP will look for it in its -; default extension directory. -; -; Windows Extensions -; Note that ODBC support is built in, so no dll is needed for it. -; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) -; extension folders as well as the separate PECL DLL download (PHP 5). -; Be sure to appropriately set the extension_dir directive. -; -;extension=php_bz2.dll -;extension=php_curl.dll -;extension=php_fileinfo.dll -;extension=php_gd2.dll -;extension=php_gettext.dll -;extension=php_gmp.dll -;extension=php_intl.dll -;extension=php_imap.dll -;extension=php_interbase.dll -;extension=php_ldap.dll -;extension=php_mbstring.dll -;extension=php_exif.dll ; Must be after mbstring as it depends on it -;extension=php_mysql.dll -;extension=php_mysqli.dll -;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client -;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client -;extension=php_openssl.dll -;extension=php_pdo_firebird.dll -;extension=php_pdo_mssql.dll -;extension=php_pdo_mysql.dll -;extension=php_pdo_oci.dll -;extension=php_pdo_odbc.dll -;extension=php_pdo_pgsql.dll -;extension=php_pdo_sqlite.dll -;extension=php_pgsql.dll -;extension=php_pspell.dll -;extension=php_shmop.dll - -; The MIBS data available in the PHP distribution must be installed. -; See http://www.php.net/manual/en/snmp.installation.php -;extension=php_snmp.dll - -;extension=php_soap.dll -;extension=php_sockets.dll -;extension=php_sqlite.dll -;extension=php_sqlite3.dll -;extension=php_sybase_ct.dll -;extension=php_tidy.dll -;extension=php_xmlrpc.dll -;extension=php_xsl.dll -;extension=php_zip.dll - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[Date] -; Defines the default timezone used by the date functions -; http://php.net/date.timezone -;date.timezone = - -; http://php.net/date.default-latitude -;date.default_latitude = 31.7667 - -; http://php.net/date.default-longitude -;date.default_longitude = 35.2333 - -; http://php.net/date.sunrise-zenith -;date.sunrise_zenith = 90.583333 - -; http://php.net/date.sunset-zenith -;date.sunset_zenith = 90.583333 - -[filter] -; http://php.net/filter.default -;filter.default = unsafe_raw - -; http://php.net/filter.default-flags -;filter.default_flags = - -[iconv] -;iconv.input_encoding = ISO-8859-1 -;iconv.internal_encoding = ISO-8859-1 -;iconv.output_encoding = ISO-8859-1 - -[intl] -;intl.default_locale = -; This directive allows you to produce PHP errors when some error -; happens within intl functions. The value is the level of the error produced. -; Default is 0, which does not produce any errors. -;intl.error_level = E_WARNING - -[sqlite] -; http://php.net/sqlite.assoc-case -;sqlite.assoc_case = 0 - -[sqlite3] -;sqlite3.extension_dir = - -[Pcre] -;PCRE library backtracking limit. -; http://php.net/pcre.backtrack-limit -;pcre.backtrack_limit=100000 - -;PCRE library recursion limit. -;Please note that if you set this value to a high number you may consume all -;the available process stack and eventually crash PHP (due to reaching the -;stack size limit imposed by the Operating System). -; http://php.net/pcre.recursion-limit -;pcre.recursion_limit=100000 - -[Pdo] -; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" -; http://php.net/pdo-odbc.connection-pooling -;pdo_odbc.connection_pooling=strict - -;pdo_odbc.db2_instance_name - -[Pdo_mysql] -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/pdo_mysql.cache_size -pdo_mysql.cache_size = 2000 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/pdo_mysql.default-socket -pdo_mysql.default_socket= - -[Phar] -; http://php.net/phar.readonly -;phar.readonly = On - -; http://php.net/phar.require-hash -;phar.require_hash = On - -;phar.cache_list = - -[Syslog] -; Whether or not to define the various syslog variables (e.g. $LOG_PID, -; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In -; runtime, you can define these variables by calling define_syslog_variables(). -; http://php.net/define-syslog-variables -define_syslog_variables = Off - -[mail function] -; For Win32 only. -; http://php.net/smtp -SMTP = localhost -; http://php.net/smtp-port -smtp_port = 25 - -; For Win32 only. -; http://php.net/sendmail-from -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -; http://php.net/sendmail-path -;sendmail_path = - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(), even in safe mode. -;mail.force_extra_parameters = - -; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename -mail.add_x_header = On - -; The path to a log file that will log all mail() calls. Log entries include -; the full path of the script, line number, To address and headers. -;mail.log = - -[SQL] -; http://php.net/sql.safe-mode -sql.safe_mode = Off - -[ODBC] -; http://php.net/odbc.default-db -;odbc.default_db = Not yet implemented - -; http://php.net/odbc.default-user -;odbc.default_user = Not yet implemented - -; http://php.net/odbc.default-pw -;odbc.default_pw = Not yet implemented - -; Controls the ODBC cursor model. -; Default: SQL_CURSOR_STATIC (default). -;odbc.default_cursortype - -; Allow or prevent persistent links. -; http://php.net/odbc.allow-persistent -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -; http://php.net/odbc.check-persistent -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/odbc.max-persistent -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/odbc.max-links -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -; http://php.net/odbc.defaultlrl -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of odbc.defaultlrl and odbc.defaultbinmode -; http://php.net/odbc.defaultbinmode -odbc.defaultbinmode = 1 - -;birdstep.max_links = -1 - -[Interbase] -; Allow or prevent persistent links. -ibase.allow_persistent = 1 - -; Maximum number of persistent links. -1 means no limit. -ibase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ibase.max_links = -1 - -; Default database name for ibase_connect(). -;ibase.default_db = - -; Default username for ibase_connect(). -;ibase.default_user = - -; Default password for ibase_connect(). -;ibase.default_password = - -; Default charset for ibase_connect(). -;ibase.default_charset = - -; Default timestamp format. -ibase.timestampformat = "%Y-%m-%d %H:%M:%S" - -; Default date format. -ibase.dateformat = "%Y-%m-%d" - -; Default time format. -ibase.timeformat = "%H:%M:%S" - -[MySQL] -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysql.allow_local_infile -mysql.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysql.allow-persistent -mysql.allow_persistent = On - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysql.cache_size -mysql.cache_size = 2000 - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysql.max-persistent -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/mysql.max-links -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysql.default-port -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysql.default-socket -mysql.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-host -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-user -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysql.default-password -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -; http://php.net/mysql.connect-timeout -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -; http://php.net/mysql.trace-mode -mysql.trace_mode = Off - -[MySQLi] - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysqli.max-persistent -mysqli.max_persistent = -1 - -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysqli.allow_local_infile -;mysqli.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysqli.allow-persistent -mysqli.allow_persistent = On - -; Maximum number of links. -1 means no limit. -; http://php.net/mysqli.max-links -mysqli.max_links = -1 - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysqli.cache_size -mysqli.cache_size = 2000 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysqli.default-port -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysqli.default-socket -mysqli.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-host -mysqli.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-user -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysqli.default-pw -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off - -[mysqlnd] -; Enable / Disable collection of general statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_statistics -mysqlnd.collect_statistics = On - -; Enable / Disable collection of memory usage statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_memory_statistics -mysqlnd.collect_memory_statistics = On - -; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. -; http://php.net/mysqlnd.net_cmd_buffer_size -;mysqlnd.net_cmd_buffer_size = 2048 - -; Size of a pre-allocated buffer used for reading data sent by the server in -; bytes. -; http://php.net/mysqlnd.net_read_buffer_size -;mysqlnd.net_read_buffer_size = 32768 - -[OCI8] - -; Connection: Enables privileged connections using external -; credentials (OCI_SYSOPER, OCI_SYSDBA) -; http://php.net/oci8.privileged-connect -;oci8.privileged_connect = Off - -; Connection: The maximum number of persistent OCI8 connections per -; process. Using -1 means no limit. -; http://php.net/oci8.max-persistent -;oci8.max_persistent = -1 - -; Connection: The maximum number of seconds a process is allowed to -; maintain an idle persistent connection. Using -1 means idle -; persistent connections will be maintained forever. -; http://php.net/oci8.persistent-timeout -;oci8.persistent_timeout = -1 - -; Connection: The number of seconds that must pass before issuing a -; ping during oci_pconnect() to check the connection validity. When -; set to 0, each oci_pconnect() will cause a ping. Using -1 disables -; pings completely. -; http://php.net/oci8.ping-interval -;oci8.ping_interval = 60 - -; Connection: Set this to a user chosen connection class to be used -; for all pooled server requests with Oracle 11g Database Resident -; Connection Pooling (DRCP). To use DRCP, this value should be set to -; the same string for all web servers running the same application, -; the database pool must be configured, and the connection string must -; specify to use a pooled server. -;oci8.connection_class = - -; High Availability: Using On lets PHP receive Fast Application -; Notification (FAN) events generated when a database node fails. The -; database must also be configured to post FAN events. -;oci8.events = Off - -; Tuning: This option enables statement caching, and specifies how -; many statements to cache. Using 0 disables statement caching. -; http://php.net/oci8.statement-cache-size -;oci8.statement_cache_size = 20 - -; Tuning: Enables statement prefetching and sets the default number of -; rows that will be fetched automatically after statement execution. -; http://php.net/oci8.default-prefetch -;oci8.default_prefetch = 100 - -; Compatibility. Using On means oci_close() will not close -; oci_connect() and oci_new_connect() connections. -; http://php.net/oci8.old-oci-close-semantics -;oci8.old_oci_close_semantics = Off - -[PostgreSQL] -; Allow or prevent persistent links. -; http://php.net/pgsql.allow-persistent -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -; http://php.net/pgsql.auto-reset-persistent -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/pgsql.max-persistent -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -; http://php.net/pgsql.max-links -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -; http://php.net/pgsql.ignore-notice -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Notice message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -; http://php.net/pgsql.log-notice -pgsql.log_notice = 0 - -[Sybase-CT] -; Allow or prevent persistent links. -; http://php.net/sybct.allow-persistent -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/sybct.max-persistent -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/sybct.max-links -sybct.max_links = -1 - -; Minimum server message severity to display. -; http://php.net/sybct.min-server-severity -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -; http://php.net/sybct.min-client-severity -sybct.min_client_severity = 10 - -; Set per-context timeout -; http://php.net/sybct.timeout -;sybct.timeout= - -;sybct.packet_size - -; The maximum time in seconds to wait for a connection attempt to succeed before returning failure. -; Default: one minute -;sybct.login_timeout= - -; The name of the host you claim to be connecting from, for display by sp_who. -; Default: none -;sybct.hostname= - -; Allows you to define how often deadlocks are to be retried. -1 means "forever". -; Default: 0 -;sybct.deadlock_retry_count= - -[bcmath] -; Number of decimal digits for all bcmath functions. -; http://php.net/bcmath.scale -bcmath.scale = 0 - -[browscap] -; http://php.net/browscap -;browscap = extra/browscap.ini - -[Session] -; Handler used to store/retrieve data. -; http://php.net/session.save-handler -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -; -; The path can be defined as: -; -; session.save_path = "N;/path" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if you -; or your OS have problems with lots of files in one directory, and is -; a more efficient layout for servers that handle lots of sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -; http://php.net/session.save-path -session.save_path = "/tmp" - -; Whether to use cookies. -; http://php.net/session.use-cookies -session.use_cookies = 1 - -; http://php.net/session.cookie-secure -;session.cookie_secure = - -; This option forces PHP to fetch and use a cookie for storing and maintaining -; the session id. We encourage this operation as it's very helpful in combating -; session hijacking when not specifying and managing your own session id. It is -; not the end all be all of session hijacking defense, but it's a good start. -; http://php.net/session.use-only-cookies -session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -; http://php.net/session.name -session.name = PHPSESSID - -; Initialize session on request startup. -; http://php.net/session.auto-start -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -; http://php.net/session.cookie-lifetime -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -; http://php.net/session.cookie-path -session.cookie_path = / - -; The domain for which the cookie is valid. -; http://php.net/session.cookie-domain -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. -; http://php.net/session.cookie-httponly -session.cookie_httponly = - -; Handler used to serialize data. php is the standard serializer of PHP. -; http://php.net/session.serialize-handler -session.serialize_handler = php - -; Defines the probability that the 'garbage collection' process is started -; on every session initialization. The probability is calculated by using -; gc_probability/gc_divisor. Where session.gc_probability is the numerator -; and gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.gc-probability -session.gc_probability = 1 - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using the following equation: -; gc_probability/gc_divisor. Where session.gc_probability is the numerator and -; session.gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. Increasing this value to 1000 will give you -; a 0.1% chance the gc will run on any give request. For high volume production servers, -; this is a more efficient approach. -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 -; http://php.net/session.gc-divisor -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -; http://php.net/session.gc-maxlifetime -session.gc_maxlifetime = 1440 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script would is the equivalent of -; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; find /path/to/sessions -cmin +24 | xargs rm - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope, even when register_globals -; is disabled. PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. This feature -; introduces some serious security problems if not handled correctly. It's -; recommended that you do not use this feature on production servers. But you -; should enable this on development servers and enable the warning as well. If you -; do not enable the feature on development servers, you won't be warned when it's -; used and debugging errors caused by this can be difficult to track down. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-42 -session.bug_compat_42 = On - -; This setting controls whether or not you are warned by PHP when initializing a -; session value into the global space. session.bug_compat_42 must be enabled before -; these warnings can be issued by PHP. See the directive above for more information. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-warn -session.bug_compat_warn = On - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -; http://php.net/session.referer-check -session.referer_check = - -; How many bytes to read from the file. -; http://php.net/session.entropy-length -session.entropy_length = 0 - -; Specified here to create the session id. -; http://php.net/session.entropy-file -; On systems that don't have /dev/urandom /dev/arandom can be used -; On windows, setting the entropy_length setting will activate the -; Windows random source (using the CryptoAPI) -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -; http://php.net/session.cache-limiter -session.cache_limiter = nocache - -; Document expires after n minutes. -; http://php.net/session.cache-expire -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publicly accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -; http://php.net/session.use-trans-sid -session.use_trans_sid = 0 - -; Select a hash function for use in generating session ids. -; Possible Values -; 0 (MD5 128 bits) -; 1 (SHA-1 160 bits) -; This option may also be set to the name of any hash function supported by -; the hash extension. A list of available hashes is returned by the hash_algos() -; function. -; http://php.net/session.hash-function -session.hash_function = 0 - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; Possible values: -; 4 (4 bits: 0-9, a-f) -; 5 (5 bits: 0-9, a-v) -; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 -; http://php.net/session.hash-bits-per-character -session.hash_bits_per_character = 5 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; http://php.net/url-rewriter.tags -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatibility mode with old versions of PHP 3.0. -mssql.compatability_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. -1 = library default -; msdlib defaults to 25 -; FreeTDS defaults to 4096 -;mssql.max_procs = -1 - -; Specify client character set. -; If empty or not set the client charset from freetds.conf is used -; This is only used when compiled with FreeTDS -;mssql.charset = "ISO-8859-1" - -[Assertion] -; Assert(expr); active by default. -; http://php.net/assert.active -;assert.active = On - -; Issue a PHP warning for each failed assertion. -; http://php.net/assert.warning -;assert.warning = On - -; Don't bail out by default. -; http://php.net/assert.bail -;assert.bail = Off - -; User-function to be called if an assertion fails. -; http://php.net/assert.callback -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -; http://php.net/assert.quiet-eval -;assert.quiet_eval = 0 - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -; http://php.net/com.typelib-file -;com.typelib_file = - -; allow Distributed-COM calls -; http://php.net/com.allow-dcom -;com.allow_dcom = true - -; autoregister constants of a components typlib on com_load() -; http://php.net/com.autoregister-typelib -;com.autoregister_typelib = true - -; register constants casesensitive -; http://php.net/com.autoregister-casesensitive -;com.autoregister_casesensitive = false - -; show warnings on duplicate constant registrations -; http://php.net/com.autoregister-verbose -;com.autoregister_verbose = true - -; The default character set code-page to use when passing strings to and from COM objects. -; Default: system ANSI code page -;com.code_page= - -[mbstring] -; language for internal character representation. -; http://php.net/mbstring.language -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -; http://php.net/mbstring.internal-encoding -;mbstring.internal_encoding = EUC-JP - -; http input encoding. -; http://php.net/mbstring.http-input -;mbstring.http_input = auto - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -; http://php.net/mbstring.http-output -;mbstring.http_output = SJIS - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -; http://php.net/mbstring.encoding-translation -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -; http://php.net/mbstring.detect-order -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -; http://php.net/mbstring.substitute-character -;mbstring.substitute_character = none; - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -; http://php.net/mbstring.func-overload -;mbstring.func_overload = 0 - -; enable strict encoding detection. -;mbstring.strict_detection = Off - -; This directive specifies the regex pattern of content types for which mb_output_handler() -; is activated. -; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) -;mbstring.http_output_conv_mimetype= - -; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte -; Default: "" -;mbstring.script_encoding= - -[gd] -; Tell the jpeg decode to ignore warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -; http://php.net/gd.jpeg-ignore-warning -;gd.jpeg_ignore_warning = 0 - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -; http://php.net/exif.encode-unicode -;exif.encode_unicode = ISO-8859-15 - -; http://php.net/exif.decode-unicode-motorola -;exif.decode_unicode_motorola = UCS-2BE - -; http://php.net/exif.decode-unicode-intel -;exif.decode_unicode_intel = UCS-2LE - -; http://php.net/exif.encode-jis -;exif.encode_jis = - -; http://php.net/exif.decode-jis-motorola -;exif.decode_jis_motorola = JIS - -; http://php.net/exif.decode-jis-intel -;exif.decode_jis_intel = JIS - -[Tidy] -; The path to a default tidy configuration file to use when using tidy -; http://php.net/tidy.default-config -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -; http://php.net/tidy.clean-output -tidy.clean_output = Off - -[soap] -; Enables or disables WSDL caching feature. -; http://php.net/soap.wsdl-cache-enabled -soap.wsdl_cache_enabled=1 - -; Sets the directory name where SOAP extension will put cache files. -; http://php.net/soap.wsdl-cache-dir -soap.wsdl_cache_dir="/tmp" - -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -; http://php.net/soap.wsdl-cache-ttl -soap.wsdl_cache_ttl=86400 - -; Sets the size of the cache limit. (Max. number of WSDL files to cache) -soap.wsdl_cache_limit = 5 - -[sysvshm] -; A default size of the shared memory segment -;sysvshm.init_mem = 10000 - -[ldap] -; Sets the maximum number of open links or -1 for unlimited. -ldap.max_links = -1 - -[mcrypt] -; For more information about mcrypt settings see http://php.net/mcrypt-module-open - -; Directory where to load mcrypt algorithms -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.algorithms_dir= - -; Directory where to load mcrypt modes -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.modes_dir= - -[dba] -;dba.default_handler= - -[xsl] -; Write operations from within XSLT are disabled by default. -; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44 -; Set it to 0 to allow all operations -;xsl.security_prefs = 44 - -; Local Variables: -; tab-width: 4 -; End: diff --git a/php/cgi-php5.3/php.ini b/php/cgi-php5.3/php.ini deleted file mode 100644 index 24e78a6c..00000000 --- a/php/cgi-php5.3/php.ini +++ /dev/null @@ -1,1918 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About php.ini ; -;;;;;;;;;;;;;;;;;;; -; PHP's initialization file, generally called php.ini, is responsible for -; configuring many of the aspects of PHP's behavior. - -; PHP attempts to find and load this configuration from a number of locations. -; The following is a summary of its search order: -; 1. SAPI module specific location. -; 2. The PHPRC environment variable. (As of PHP 5.2.0) -; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) -; 4. Current working directory (except CLI) -; 5. The web server's directory (for SAPI modules), or directory of PHP -; (otherwise in Windows) -; 6. The directory from the --with-config-file-path compile time option, or the -; Windows directory (C:\windows or C:\winnt) -; See the PHP docs for more specific information. -; http://php.net/configuration.file - -; The syntax of the file is extremely simple. Whitespace and lines -; beginning with a semicolon are silently ignored (as you probably guessed). -; Section headers (e.g. [Foo]) are also silently ignored, even though -; they might mean something in the future. - -; Directives following the section heading [PATH=/www/mysite] only -; apply to PHP files in the /www/mysite directory. Directives -; following the section heading [HOST=www.example.com] only apply to -; PHP files served from www.example.com. Directives set in these -; special sections cannot be overridden by user-defined INI files or -; at runtime. Currently, [PATH=] and [HOST=] sections only work under -; CGI/FastCGI. -; http://php.net/ini.sections - -; Directives are specified using the following syntax: -; directive = value -; Directive names are *case sensitive* - foo=bar is different from FOO=bar. -; Directives are variables used to configure PHP or PHP extensions. -; There is no name validation. If PHP can't find an expected -; directive because it is not set or is mistyped, a default value will be used. - -; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one -; of the INI constants (On, Off, True, False, Yes, No and None) or an expression -; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a -; previously set variable or directive (e.g. ${foo}) - -; Expressions in the INI file are limited to bitwise operators and parentheses: -; | bitwise OR -; ^ bitwise XOR -; & bitwise AND -; ~ bitwise NOT -; ! boolean NOT - -; Boolean flags can be turned on using the values 1, On, True or Yes. -; They can be turned off using the values 0, Off, False or No. - -; An empty string can be denoted by simply not writing anything after the equal -; sign, or by using the None keyword: - -; foo = ; sets foo to an empty string -; foo = None ; sets foo to an empty string -; foo = "None" ; sets foo to the string 'None' - -; If you use constants in your value, and these constants belong to a -; dynamically loaded extension (either a PHP extension or a Zend extension), -; you may only use these constants *after* the line that loads the extension. - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; PHP comes packaged with two INI files. One that is recommended to be used -; in production environments and one that is recommended to be used in -; development environments. - -; php.ini-production contains settings which hold security, performance and -; best practices at its core. But please be aware, these settings may break -; compatibility with older or less security conscience applications. We -; recommending using the production ini in production and testing environments. - -; php.ini-development is very similar to its production variant, except it's -; much more verbose when it comes to errors. We recommending using the -; development version only in development environments as errors shown to -; application users can inadvertently leak otherwise secure information. - -;;;;;;;;;;;;;;;;;;; -; Quick Reference ; -;;;;;;;;;;;;;;;;;;; -; The following are all the settings which are different in either the production -; or development versions of the INIs with respect to PHP's default behavior. -; Please see the actual settings later in the document for more details as to why -; we recommend these changes in PHP's behavior. - -; allow_call_time_pass_reference -; Default Value: On -; Development Value: Off -; Production Value: Off - -; display_errors -; Default Value: On -; Development Value: On -; Production Value: Off - -; display_startup_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; error_reporting -; Default Value: E_ALL & ~E_NOTICE -; Development Value: E_ALL | E_STRICT -; Production Value: E_ALL & ~E_DEPRECATED - -; html_errors -; Default Value: On -; Development Value: On -; Production value: Off - -; log_errors -; Default Value: Off -; Development Value: On -; Production Value: On - -; magic_quotes_gpc -; Default Value: On -; Development Value: Off -; Production Value: Off - -; max_input_time -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) - -; output_buffering -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 - -; register_argc_argv -; Default Value: On -; Development Value: Off -; Production Value: Off - -; register_long_arrays -; Default Value: On -; Development Value: Off -; Production Value: Off - -; request_order -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" - -; session.bug_compat_42 -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.bug_compat_warn -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.gc_divisor -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 - -; session.hash_bits_per_character -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 - -; short_open_tag -; Default Value: On -; Development Value: Off -; Production Value: Off - -; track_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; url_rewriter.tags -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" - -; variables_order -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS" - -;;;;;;;;;;;;;;;;;;;; -; php.ini Options ; -;;;;;;;;;;;;;;;;;;;; -; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" -;user_ini.filename = ".user.ini" - -; To disable this feature set this option to empty value -;user_ini.filename = - -; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) -;user_ini.cache_ttl = 300 - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -; http://php.net/engine -engine = On - -; This directive determines whether or not PHP will recognize code between -; tags as PHP source which should be processed as such. It's been -; recommended for several years that you not use the short tag "short cut" and -; instead to use the full tag combination. With the wide spread use -; of XML and use of these tags by other languages, the server can become easily -; confused and end up parsing the wrong code in the wrong context. But because -; this short cut has been a feature for such a long time, it's currently still -; supported for backwards compatibility, but we recommend you don't use them. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/short-open-tag -short_open_tag = Off - -; Allow ASP-style <% %> tags. -; http://php.net/asp-tags -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -; http://php.net/precision -precision = 14 - -; Enforce year 2000 compliance (will cause problems with non-compliant browsers) -; http://php.net/y2k-compliance -y2k_compliance = On - -; Output buffering is a mechanism for controlling how much output data -; (excluding headers and cookies) PHP should keep internally before pushing that -; data to the client. If your application's output exceeds this setting, PHP -; will send that data in chunks of roughly the size you specify. -; Turning on this setting and managing its maximum buffer size can yield some -; interesting side-effects depending on your application and web server. -; You may be able to send headers and cookies after you've already sent output -; through print or echo. You also may see performance benefits if your server is -; emitting less packets due to buffered output versus PHP streaming the output -; as it gets it. On production servers, 4096 bytes is a good setting for performance -; reasons. -; Note: Output buffering can also be controlled via Output Buffering Control -; functions. -; Possible Values: -; On = Enabled and buffer is unlimited. (Use with caution) -; Off = Disabled -; Integer = Enables the buffer and sets its maximum size in bytes. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 -; http://php.net/output-buffering -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -; http://php.net/output-handler -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few hundreds bytes each as a result of -; compression. If you prefer a larger chunk size for better -; performance, enable output_buffering in addition. -; Note: You need to use zlib.output_handler instead of the standard -; output_handler, or otherwise the output will be corrupted. -; http://php.net/zlib.output-compression -zlib.output_compression = Off - -; http://php.net/zlib.output-compression-level -;zlib.output_compression_level = -1 - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -; http://php.net/zlib.output-handler -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -; http://php.net/implicit-flush -; Note: This directive is hardcoded to On for the CLI SAPI -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instantiated. A warning appears if the specified function is -; not defined, or if the function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func = - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 17 - -; This directive allows you to enable and disable warnings which PHP will issue -; if you pass a value by reference at function call time. Passing values by -; reference at function call time is a deprecated feature which will be removed -; from PHP at some point in the near future. The acceptable method for passing a -; value by reference to a function is by declaring the reference in the functions -; definition, not at call time. This directive does not disable this feature, it -; only determines whether PHP will warn you about it or not. These warnings -; should enabled in development environments only. -; Default Value: On (Suppress warnings) -; Development Value: Off (Issue warnings) -; Production Value: Off (Issue warnings) -; http://php.net/allow-call-time-pass-reference -allow_call_time_pass_reference = Off - -; Safe Mode -; http://php.net/safe-mode -safe_mode = Off - -; By default, Safe Mode does a UID compare check when -; opening files. If you want to relax this to a GID compare, -; then turn on safe_mode_gid. -; http://php.net/safe-mode-gid -safe_mode_gid = Off - -; When safe_mode is on, UID/GID checks are bypassed when -; including files from this directory and its subdirectories. -; (directory must also be in include_path or full path must -; be used when including) -; http://php.net/safe-mode-include-dir -safe_mode_include_dir = - -; When safe_mode is on, only executables located in the safe_mode_exec_dir -; will be allowed to be executed via the exec family of functions. -; http://php.net/safe-mode-exec-dir -safe_mode_exec_dir = - -; Setting certain environment variables may be a potential security breach. -; This directive contains a comma-delimited list of prefixes. In Safe Mode, -; the user may only alter environment variables whose names begin with the -; prefixes supplied here. By default, users will only be able to set -; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). -; Note: If this directive is empty, PHP will let the user modify ANY -; environment variable! -; http://php.net/safe-mode-allowed-env-vars -safe_mode_allowed_env_vars = PHP_ - -; This directive contains a comma-delimited list of environment variables that -; the end user won't be able to change using putenv(). These variables will be -; protected even if safe_mode_allowed_env_vars is set to allow to change them. -; http://php.net/safe-mode-protected-env-vars -safe_mode_protected_env_vars = LD_LIBRARY_PATH - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/open-basedir -;open_basedir = - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-functions -disable_functions = - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-classes -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; would work. -; http://php.net/syntax-highlighting -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.bg = #FFFFFF -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long requests, which may end up -; being interrupted by the user or a browser timing out. PHP's default behavior -; is to disable this feature. -; http://php.net/ignore-user-abort -;ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; http://php.net/realpath-cache-size -;realpath_cache_size = 16k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; http://php.net/realpath-cache-ttl -;realpath_cache_ttl = 120 - -; Enables or disables the circular reference collector. -; http://php.net/zend.enable-gc -zend.enable_gc = On - -;;;;;;;;;;;;;;;;; -; Miscellaneous ; -;;;;;;;;;;;;;;;;; - -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -; http://php.net/expose-php -expose_php = On - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -; Maximum execution time of each script, in seconds -; http://php.net/max-execution-time -; Note: This directive is hardcoded to 0 for the CLI SAPI -max_execution_time = 30 - -; Maximum amount of time each script may spend parsing request data. It's a good -; idea to limit this time on productions servers in order to eliminate unexpectedly -; long running scripts. -; Note: This directive is hardcoded to -1 for the CLI SAPI -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) -; http://php.net/max-input-time -max_input_time = 60 - -; Maximum input variable nesting level -; http://php.net/max-input-nesting-level -;max_input_nesting_level = 64 - -; How many GET/POST/COOKIE input variables may be accepted -; max_input_vars = 1000 - -; Maximum amount of memory a script may consume (128MB) -; http://php.net/memory-limit -memory_limit = 128M - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; This directive informs PHP of which errors, warnings and notices you would like -; it to take action for. The recommended way of setting values for this -; directive is through the use of the error level constants and bitwise -; operators. The error level constants are below here for convenience as well as -; some common settings and their meanings. -; By default, PHP is set to take action on all errors, notices and warnings EXCEPT -; those related to E_NOTICE and E_STRICT, which together cover best practices and -; recommended coding standards in PHP. For performance reasons, this is the -; recommend error reporting setting. Your production server shouldn't be wasting -; resources complaining about best practices and coding standards. That's what -; development servers and development settings are for. -; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This -; means it pretty much reports everything which is exactly what you want during -; development and early testing. -; -; Error Level Constants: -; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; E_DEPRECATED - warn about code that will not work in future versions -; of PHP -; E_USER_DEPRECATED - user-generated deprecation warnings -; -; Common Values: -; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.) -; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices) -; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) -; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.) -; Default Value: E_ALL & ~E_NOTICE -; Development Value: E_ALL | E_STRICT -; Production Value: E_ALL & ~E_DEPRECATED -; http://php.net/error-reporting -error_reporting = E_ALL | E_STRICT - -; This directive controls whether or not and where PHP will output errors, -; notices and warnings too. Error output is very useful during development, but -; it could be very dangerous in production environments. Depending on the code -; which is triggering the error, sensitive information could potentially leak -; out of your application such as database usernames and passwords or worse. -; It's recommended that errors be logged on production servers rather than -; having the errors sent to STDOUT. -; Possible Values: -; Off = Do not display any errors -; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout = Display errors to STDOUT -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/display-errors -display_errors = On - -; The display of errors which occur during PHP's startup sequence are handled -; separately from display_errors. PHP's default behavior is to suppress those -; errors from clients. Turning the display of startup errors on can be useful in -; debugging configuration problems. But, it's strongly recommended that you -; leave this setting off on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/display-startup-errors -display_startup_errors = On - -; Besides displaying errors, PHP can also log errors to locations such as a -; server-specific log, STDERR, or a location specified by the error_log -; directive found below. While errors should not be displayed on productions -; servers they should still be monitored and logging is a great way to do that. -; Default Value: Off -; Development Value: On -; Production Value: On -; http://php.net/log-errors -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -; http://php.net/log-errors-max-len -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line unless ignore_repeated_source is set true. -; http://php.net/ignore-repeated-errors -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -; http://php.net/ignore-repeated-source -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -; http://php.net/report-memleaks -report_memleaks = On - -; This setting is on by default. -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). Setting this value -; to On can assist in debugging and is appropriate for development servers. It should -; however be disabled on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/track-errors -track_errors = On - -; Turn off normal error reporting and emit XML-RPC error XML -; http://php.net/xmlrpc-errors -;xmlrpc_errors = 0 - -; An XML-RPC faultCode -;xmlrpc_error_number = 0 - -; When PHP displays or logs an error, it has the capability of inserting html -; links to documentation related to that error. This directive controls whether -; those HTML links appear in error messages or not. For performance and security -; reasons, it's recommended you disable this on production servers. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: On -; Development Value: On -; Production value: Off -; http://php.net/html-errors -html_errors = On - -; If html_errors is set On PHP produces clickable error messages that direct -; to a page describing the error or function causing the error in detail. -; You can download a copy of the PHP manual from http://php.net/docs -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. PHP's default behavior is to leave these settings empty. -; Note: Never use this feature for production boxes. -; http://php.net/docref-root -; Examples -;docref_root = "/phpmanual/" - -; http://php.net/docref-ext -;docref_ext = .html - -; String to output before an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-prepend-string -; Example: -;error_prepend_string = "" - -; String to output after an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-append-string -; Example: -;error_append_string = "" - -; Log errors to specified file. PHP's default behavior is to leave this value -; empty. -; http://php.net/error-log -; Example: -;error_log = php_errors.log -; Log errors to syslog (Event Log on NT, not valid in Windows 95). -;error_log = syslog - -;windows.show_crt_warning -; Default value: 0 -; Development value: 0 -; Production value: 0 - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; - -; The separator used in PHP generated URLs to separate arguments. -; PHP's default setting is "&". -; http://php.net/arg-separator.output -; Example: -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; PHP's default setting is "&". -; NOTE: Every character in this directive is considered as separator! -; http://php.net/arg-separator.input -; Example: -;arg_separator.input = ";&" - -; This directive determines which super global arrays are registered when PHP -; starts up. If the register_globals directive is enabled, it also determines -; what order variables are populated into the global space. G,P,C,E & S are -; abbreviations for the following respective super globals: GET, POST, COOKIE, -; ENV and SERVER. There is a performance penalty paid for the registration of -; these arrays and because ENV is not as commonly used as the others, ENV is -; is not recommended on productions servers. You can still get access to -; the environment variables through getenv() should you need to. -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS"; -; http://php.net/variables-order -variables_order = "GPCS" - -; This directive determines which super global data (G,P,C,E & S) should -; be registered into the super global array REQUEST. If so, it also determines -; the order in which that data is registered. The values for this directive are -; specified in the same manner as the variables_order directive, EXCEPT one. -; Leaving this value empty will cause PHP to use the value set in the -; variables_order directive. It does not mean it will leave the super globals -; array REQUEST empty. -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" -; http://php.net/request-order -request_order = "GP" - -; Whether or not to register the EGPCS variables as global variables. You may -; want to turn this off if you don't want to clutter your scripts' global scope -; with user data. -; You should do your best to write your scripts so that they do not require -; register_globals to be on; Using form variables as globals can easily lead -; to possible security problems, if the code is not very well thought of. -; http://php.net/register-globals -register_globals = Off - -; Determines whether the deprecated long $HTTP_*_VARS type predefined variables -; are registered by PHP or not. As they are deprecated, we obviously don't -; recommend you use them. They are on by default for compatibility reasons but -; they are not recommended on production servers. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-long-arrays -register_long_arrays = Off - -; This directive determines whether PHP registers $argv & $argc each time it -; runs. $argv contains an array of all the arguments passed to PHP when a script -; is invoked. $argc contains an integer representing the number of arguments -; that were passed when the script was invoked. These arrays are extremely -; useful when running scripts from the command line. When this directive is -; enabled, registering these variables consumes CPU cycles and memory each time -; a script is executed. For performance reasons, this feature should be disabled -; on production servers. -; Note: This directive is hardcoded to On for the CLI SAPI -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-argc-argv -register_argc_argv = Off - -; When enabled, the SERVER and ENV variables are created when they're first -; used (Just In Time) instead of when the script starts. If these variables -; are not used within a script, having this directive on will result in a -; performance gain. The PHP directives register_globals, register_long_arrays, -; and register_argc_argv must be disabled for this directive to have any affect. -; http://php.net/auto-globals-jit -auto_globals_jit = On - -; Maximum size of POST data that PHP will accept. -; http://php.net/post-max-size -post_max_size = 8M - -; Magic quotes are a preprocessing feature of PHP where PHP will attempt to -; escape any character sequences in GET, POST, COOKIE and ENV data which might -; otherwise corrupt data being placed in resources such as databases before -; making that data available to you. Because of character encoding issues and -; non-standard SQL implementations across many databases, it's not currently -; possible for this feature to be 100% accurate. PHP's default behavior is to -; enable the feature. We strongly recommend you use the escaping mechanisms -; designed specifically for the database your using instead of relying on this -; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is -; removed in PHP 5.4. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/magic-quotes-gpc -magic_quotes_gpc = Off - -; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. -; http://php.net/magic-quotes-runtime -magic_quotes_runtime = Off - -; Use Sybase-style magic quotes (escape ' with '' instead of \'). -; http://php.net/magic-quotes-sybase -magic_quotes_sybase = Off - -; Automatically add files before PHP document. -; http://php.net/auto-prepend-file -auto_prepend_file = - -; Automatically add files after PHP document. -; http://php.net/auto-append-file -auto_append_file = - -; By default, PHP will output a character encoding using -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -; http://php.net/default-mimetype -default_mimetype = "text/html" - -; PHP's default character set is set to empty. -; http://php.net/default-charset -;default_charset = "iso-8859-1" - -; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is -; to disable this feature. -; http://php.net/always-populate-raw-post-data -;always_populate_raw_post_data = On - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -include_path = ".:/usr/share/php5:/usr/share/php" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" -; -; PHP's default setting for include_path is ".;/path/to/php/pear" -; http://php.net/include-path - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -; http://php.net/doc-root -doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -; http://php.net/user-dir -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; http://php.net/extension-dir -; extension_dir = "./" -; On windows: -; extension_dir = "ext" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -; http://php.net/enable-dl -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; http://php.net/cgi.force-redirect -;cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. PHP's default behavior is to disable this feature. -;cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; http://php.net/cgi.redirect-status-env -;cgi.redirect_status_env = - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; http://php.net/cgi.fix-pathinfo -;cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; http://php.net/fastcgi.impersonate -;fastcgi.impersonate = 1 - -; Disable logging through FastCGI connection. PHP's default behavior is to enable -; this feature. -;fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -; http://php.net/cgi.rfc2616-headers -;cgi.rfc2616_headers = 0 - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -; http://php.net/file-uploads -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -; http://php.net/upload-tmp-dir -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -; http://php.net/upload-max-filesize -upload_max_filesize = 2M - -; Maximum number of files that can be uploaded via a single request -max_file_uploads = 20 - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-fopen -allow_url_fopen = On - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-include -allow_url_include = Off - -; Define the anonymous ftp password (your email address). PHP's default setting -; for this is empty. -; http://php.net/from -;from="john@doe.com" - -; Define the User-Agent string. PHP's default setting for this is empty. -; http://php.net/user-agent -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -; http://php.net/default-socket-timeout -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; http://php.net/auto-detect-line-endings -;auto_detect_line_endings = Off - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; - -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, on Windows: -; -; extension=msql.dll -; -; ... or under UNIX: -; -; extension=msql.so -; -; ... or with a path: -; -; extension=/path/to/extension/msql.so -; -; If you only provide the name of the extension, PHP will look for it in its -; default extension directory. -; -; Windows Extensions -; Note that ODBC support is built in, so no dll is needed for it. -; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) -; extension folders as well as the separate PECL DLL download (PHP 5). -; Be sure to appropriately set the extension_dir directive. -; -;extension=php_bz2.dll -;extension=php_curl.dll -;extension=php_fileinfo.dll -;extension=php_gd2.dll -;extension=php_gettext.dll -;extension=php_gmp.dll -;extension=php_intl.dll -;extension=php_imap.dll -;extension=php_interbase.dll -;extension=php_ldap.dll -;extension=php_mbstring.dll -;extension=php_exif.dll ; Must be after mbstring as it depends on it -;extension=php_mysql.dll -;extension=php_mysqli.dll -;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client -;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client -;extension=php_openssl.dll -;extension=php_pdo_firebird.dll -;extension=php_pdo_mssql.dll -;extension=php_pdo_mysql.dll -;extension=php_pdo_oci.dll -;extension=php_pdo_odbc.dll -;extension=php_pdo_pgsql.dll -;extension=php_pdo_sqlite.dll -;extension=php_pgsql.dll -;extension=php_pspell.dll -;extension=php_shmop.dll - -; The MIBS data available in the PHP distribution must be installed. -; See http://www.php.net/manual/en/snmp.installation.php -;extension=php_snmp.dll - -;extension=php_soap.dll -;extension=php_sockets.dll -;extension=php_sqlite.dll -;extension=php_sqlite3.dll -;extension=php_sybase_ct.dll -;extension=php_tidy.dll -;extension=php_xmlrpc.dll -;extension=php_xsl.dll -;extension=php_zip.dll - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[Date] -; Defines the default timezone used by the date functions -; http://php.net/date.timezone -;date.timezone = - -; http://php.net/date.default-latitude -;date.default_latitude = 31.7667 - -; http://php.net/date.default-longitude -;date.default_longitude = 35.2333 - -; http://php.net/date.sunrise-zenith -;date.sunrise_zenith = 90.583333 - -; http://php.net/date.sunset-zenith -;date.sunset_zenith = 90.583333 - -[filter] -; http://php.net/filter.default -;filter.default = unsafe_raw - -; http://php.net/filter.default-flags -;filter.default_flags = - -[iconv] -;iconv.input_encoding = ISO-8859-1 -;iconv.internal_encoding = ISO-8859-1 -;iconv.output_encoding = ISO-8859-1 - -[intl] -;intl.default_locale = -; This directive allows you to produce PHP errors when some error -; happens within intl functions. The value is the level of the error produced. -; Default is 0, which does not produce any errors. -;intl.error_level = E_WARNING - -[sqlite] -; http://php.net/sqlite.assoc-case -;sqlite.assoc_case = 0 - -[sqlite3] -;sqlite3.extension_dir = - -[Pcre] -;PCRE library backtracking limit. -; http://php.net/pcre.backtrack-limit -;pcre.backtrack_limit=100000 - -;PCRE library recursion limit. -;Please note that if you set this value to a high number you may consume all -;the available process stack and eventually crash PHP (due to reaching the -;stack size limit imposed by the Operating System). -; http://php.net/pcre.recursion-limit -;pcre.recursion_limit=100000 - -[Pdo] -; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" -; http://php.net/pdo-odbc.connection-pooling -;pdo_odbc.connection_pooling=strict - -;pdo_odbc.db2_instance_name - -[Pdo_mysql] -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/pdo_mysql.cache_size -pdo_mysql.cache_size = 2000 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/pdo_mysql.default-socket -pdo_mysql.default_socket= - -[Phar] -; http://php.net/phar.readonly -;phar.readonly = On - -; http://php.net/phar.require-hash -;phar.require_hash = On - -;phar.cache_list = - -[Syslog] -; Whether or not to define the various syslog variables (e.g. $LOG_PID, -; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In -; runtime, you can define these variables by calling define_syslog_variables(). -; http://php.net/define-syslog-variables -define_syslog_variables = Off - -[mail function] -; For Win32 only. -; http://php.net/smtp -SMTP = localhost -; http://php.net/smtp-port -smtp_port = 25 - -; For Win32 only. -; http://php.net/sendmail-from -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -; http://php.net/sendmail-path -;sendmail_path = - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(), even in safe mode. -;mail.force_extra_parameters = - -; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename -mail.add_x_header = On - -; The path to a log file that will log all mail() calls. Log entries include -; the full path of the script, line number, To address and headers. -;mail.log = - -[SQL] -; http://php.net/sql.safe-mode -sql.safe_mode = Off - -[ODBC] -; http://php.net/odbc.default-db -;odbc.default_db = Not yet implemented - -; http://php.net/odbc.default-user -;odbc.default_user = Not yet implemented - -; http://php.net/odbc.default-pw -;odbc.default_pw = Not yet implemented - -; Controls the ODBC cursor model. -; Default: SQL_CURSOR_STATIC (default). -;odbc.default_cursortype - -; Allow or prevent persistent links. -; http://php.net/odbc.allow-persistent -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -; http://php.net/odbc.check-persistent -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/odbc.max-persistent -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/odbc.max-links -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -; http://php.net/odbc.defaultlrl -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of odbc.defaultlrl and odbc.defaultbinmode -; http://php.net/odbc.defaultbinmode -odbc.defaultbinmode = 1 - -;birdstep.max_links = -1 - -[Interbase] -; Allow or prevent persistent links. -ibase.allow_persistent = 1 - -; Maximum number of persistent links. -1 means no limit. -ibase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ibase.max_links = -1 - -; Default database name for ibase_connect(). -;ibase.default_db = - -; Default username for ibase_connect(). -;ibase.default_user = - -; Default password for ibase_connect(). -;ibase.default_password = - -; Default charset for ibase_connect(). -;ibase.default_charset = - -; Default timestamp format. -ibase.timestampformat = "%Y-%m-%d %H:%M:%S" - -; Default date format. -ibase.dateformat = "%Y-%m-%d" - -; Default time format. -ibase.timeformat = "%H:%M:%S" - -[MySQL] -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysql.allow_local_infile -mysql.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysql.allow-persistent -mysql.allow_persistent = On - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysql.cache_size -mysql.cache_size = 2000 - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysql.max-persistent -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/mysql.max-links -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysql.default-port -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysql.default-socket -mysql.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-host -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-user -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysql.default-password -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -; http://php.net/mysql.connect-timeout -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -; http://php.net/mysql.trace-mode -mysql.trace_mode = Off - -[MySQLi] - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysqli.max-persistent -mysqli.max_persistent = -1 - -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysqli.allow_local_infile -;mysqli.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysqli.allow-persistent -mysqli.allow_persistent = On - -; Maximum number of links. -1 means no limit. -; http://php.net/mysqli.max-links -mysqli.max_links = -1 - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysqli.cache_size -mysqli.cache_size = 2000 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysqli.default-port -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysqli.default-socket -mysqli.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-host -mysqli.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-user -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysqli.default-pw -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off - -[mysqlnd] -; Enable / Disable collection of general statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_statistics -mysqlnd.collect_statistics = On - -; Enable / Disable collection of memory usage statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_memory_statistics -mysqlnd.collect_memory_statistics = On - -; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. -; http://php.net/mysqlnd.net_cmd_buffer_size -;mysqlnd.net_cmd_buffer_size = 2048 - -; Size of a pre-allocated buffer used for reading data sent by the server in -; bytes. -; http://php.net/mysqlnd.net_read_buffer_size -;mysqlnd.net_read_buffer_size = 32768 - -[OCI8] - -; Connection: Enables privileged connections using external -; credentials (OCI_SYSOPER, OCI_SYSDBA) -; http://php.net/oci8.privileged-connect -;oci8.privileged_connect = Off - -; Connection: The maximum number of persistent OCI8 connections per -; process. Using -1 means no limit. -; http://php.net/oci8.max-persistent -;oci8.max_persistent = -1 - -; Connection: The maximum number of seconds a process is allowed to -; maintain an idle persistent connection. Using -1 means idle -; persistent connections will be maintained forever. -; http://php.net/oci8.persistent-timeout -;oci8.persistent_timeout = -1 - -; Connection: The number of seconds that must pass before issuing a -; ping during oci_pconnect() to check the connection validity. When -; set to 0, each oci_pconnect() will cause a ping. Using -1 disables -; pings completely. -; http://php.net/oci8.ping-interval -;oci8.ping_interval = 60 - -; Connection: Set this to a user chosen connection class to be used -; for all pooled server requests with Oracle 11g Database Resident -; Connection Pooling (DRCP). To use DRCP, this value should be set to -; the same string for all web servers running the same application, -; the database pool must be configured, and the connection string must -; specify to use a pooled server. -;oci8.connection_class = - -; High Availability: Using On lets PHP receive Fast Application -; Notification (FAN) events generated when a database node fails. The -; database must also be configured to post FAN events. -;oci8.events = Off - -; Tuning: This option enables statement caching, and specifies how -; many statements to cache. Using 0 disables statement caching. -; http://php.net/oci8.statement-cache-size -;oci8.statement_cache_size = 20 - -; Tuning: Enables statement prefetching and sets the default number of -; rows that will be fetched automatically after statement execution. -; http://php.net/oci8.default-prefetch -;oci8.default_prefetch = 100 - -; Compatibility. Using On means oci_close() will not close -; oci_connect() and oci_new_connect() connections. -; http://php.net/oci8.old-oci-close-semantics -;oci8.old_oci_close_semantics = Off - -[PostgreSQL] -; Allow or prevent persistent links. -; http://php.net/pgsql.allow-persistent -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -; http://php.net/pgsql.auto-reset-persistent -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/pgsql.max-persistent -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -; http://php.net/pgsql.max-links -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -; http://php.net/pgsql.ignore-notice -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Notice message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -; http://php.net/pgsql.log-notice -pgsql.log_notice = 0 - -[Sybase-CT] -; Allow or prevent persistent links. -; http://php.net/sybct.allow-persistent -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/sybct.max-persistent -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/sybct.max-links -sybct.max_links = -1 - -; Minimum server message severity to display. -; http://php.net/sybct.min-server-severity -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -; http://php.net/sybct.min-client-severity -sybct.min_client_severity = 10 - -; Set per-context timeout -; http://php.net/sybct.timeout -;sybct.timeout= - -;sybct.packet_size - -; The maximum time in seconds to wait for a connection attempt to succeed before returning failure. -; Default: one minute -;sybct.login_timeout= - -; The name of the host you claim to be connecting from, for display by sp_who. -; Default: none -;sybct.hostname= - -; Allows you to define how often deadlocks are to be retried. -1 means "forever". -; Default: 0 -;sybct.deadlock_retry_count= - -[bcmath] -; Number of decimal digits for all bcmath functions. -; http://php.net/bcmath.scale -bcmath.scale = 0 - -[browscap] -; http://php.net/browscap -;browscap = extra/browscap.ini - -[Session] -; Handler used to store/retrieve data. -; http://php.net/session.save-handler -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -; -; The path can be defined as: -; -; session.save_path = "N;/path" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if you -; or your OS have problems with lots of files in one directory, and is -; a more efficient layout for servers that handle lots of sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -; http://php.net/session.save-path -session.save_path = "/tmp" - -; Whether to use cookies. -; http://php.net/session.use-cookies -session.use_cookies = 1 - -; http://php.net/session.cookie-secure -;session.cookie_secure = - -; This option forces PHP to fetch and use a cookie for storing and maintaining -; the session id. We encourage this operation as it's very helpful in combating -; session hijacking when not specifying and managing your own session id. It is -; not the end all be all of session hijacking defense, but it's a good start. -; http://php.net/session.use-only-cookies -session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -; http://php.net/session.name -session.name = PHPSESSID - -; Initialize session on request startup. -; http://php.net/session.auto-start -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -; http://php.net/session.cookie-lifetime -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -; http://php.net/session.cookie-path -session.cookie_path = / - -; The domain for which the cookie is valid. -; http://php.net/session.cookie-domain -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. -; http://php.net/session.cookie-httponly -session.cookie_httponly = - -; Handler used to serialize data. php is the standard serializer of PHP. -; http://php.net/session.serialize-handler -session.serialize_handler = php - -; Defines the probability that the 'garbage collection' process is started -; on every session initialization. The probability is calculated by using -; gc_probability/gc_divisor. Where session.gc_probability is the numerator -; and gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.gc-probability -session.gc_probability = 1 - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using the following equation: -; gc_probability/gc_divisor. Where session.gc_probability is the numerator and -; session.gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. Increasing this value to 1000 will give you -; a 0.1% chance the gc will run on any give request. For high volume production servers, -; this is a more efficient approach. -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 -; http://php.net/session.gc-divisor -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -; http://php.net/session.gc-maxlifetime -session.gc_maxlifetime = 1440 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script would is the equivalent of -; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; find /path/to/sessions -cmin +24 | xargs rm - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope, even when register_globals -; is disabled. PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. This feature -; introduces some serious security problems if not handled correctly. It's -; recommended that you do not use this feature on production servers. But you -; should enable this on development servers and enable the warning as well. If you -; do not enable the feature on development servers, you won't be warned when it's -; used and debugging errors caused by this can be difficult to track down. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-42 -session.bug_compat_42 = On - -; This setting controls whether or not you are warned by PHP when initializing a -; session value into the global space. session.bug_compat_42 must be enabled before -; these warnings can be issued by PHP. See the directive above for more information. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-warn -session.bug_compat_warn = On - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -; http://php.net/session.referer-check -session.referer_check = - -; How many bytes to read from the file. -; http://php.net/session.entropy-length -session.entropy_length = 0 - -; Specified here to create the session id. -; http://php.net/session.entropy-file -; On systems that don't have /dev/urandom /dev/arandom can be used -; On windows, setting the entropy_length setting will activate the -; Windows random source (using the CryptoAPI) -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -; http://php.net/session.cache-limiter -session.cache_limiter = nocache - -; Document expires after n minutes. -; http://php.net/session.cache-expire -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publicly accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -; http://php.net/session.use-trans-sid -session.use_trans_sid = 0 - -; Select a hash function for use in generating session ids. -; Possible Values -; 0 (MD5 128 bits) -; 1 (SHA-1 160 bits) -; This option may also be set to the name of any hash function supported by -; the hash extension. A list of available hashes is returned by the hash_algos() -; function. -; http://php.net/session.hash-function -session.hash_function = 0 - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; Possible values: -; 4 (4 bits: 0-9, a-f) -; 5 (5 bits: 0-9, a-v) -; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 -; http://php.net/session.hash-bits-per-character -session.hash_bits_per_character = 5 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; http://php.net/url-rewriter.tags -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatibility mode with old versions of PHP 3.0. -mssql.compatability_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. -1 = library default -; msdlib defaults to 25 -; FreeTDS defaults to 4096 -;mssql.max_procs = -1 - -; Specify client character set. -; If empty or not set the client charset from freetds.conf is used -; This is only used when compiled with FreeTDS -;mssql.charset = "ISO-8859-1" - -[Assertion] -; Assert(expr); active by default. -; http://php.net/assert.active -;assert.active = On - -; Issue a PHP warning for each failed assertion. -; http://php.net/assert.warning -;assert.warning = On - -; Don't bail out by default. -; http://php.net/assert.bail -;assert.bail = Off - -; User-function to be called if an assertion fails. -; http://php.net/assert.callback -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -; http://php.net/assert.quiet-eval -;assert.quiet_eval = 0 - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -; http://php.net/com.typelib-file -;com.typelib_file = - -; allow Distributed-COM calls -; http://php.net/com.allow-dcom -;com.allow_dcom = true - -; autoregister constants of a components typlib on com_load() -; http://php.net/com.autoregister-typelib -;com.autoregister_typelib = true - -; register constants casesensitive -; http://php.net/com.autoregister-casesensitive -;com.autoregister_casesensitive = false - -; show warnings on duplicate constant registrations -; http://php.net/com.autoregister-verbose -;com.autoregister_verbose = true - -; The default character set code-page to use when passing strings to and from COM objects. -; Default: system ANSI code page -;com.code_page= - -[mbstring] -; language for internal character representation. -; http://php.net/mbstring.language -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -; http://php.net/mbstring.internal-encoding -;mbstring.internal_encoding = EUC-JP - -; http input encoding. -; http://php.net/mbstring.http-input -;mbstring.http_input = auto - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -; http://php.net/mbstring.http-output -;mbstring.http_output = SJIS - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -; http://php.net/mbstring.encoding-translation -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -; http://php.net/mbstring.detect-order -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -; http://php.net/mbstring.substitute-character -;mbstring.substitute_character = none; - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -; http://php.net/mbstring.func-overload -;mbstring.func_overload = 0 - -; enable strict encoding detection. -;mbstring.strict_detection = Off - -; This directive specifies the regex pattern of content types for which mb_output_handler() -; is activated. -; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) -;mbstring.http_output_conv_mimetype= - -; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte -; Default: "" -;mbstring.script_encoding= - -[gd] -; Tell the jpeg decode to ignore warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -; http://php.net/gd.jpeg-ignore-warning -;gd.jpeg_ignore_warning = 0 - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -; http://php.net/exif.encode-unicode -;exif.encode_unicode = ISO-8859-15 - -; http://php.net/exif.decode-unicode-motorola -;exif.decode_unicode_motorola = UCS-2BE - -; http://php.net/exif.decode-unicode-intel -;exif.decode_unicode_intel = UCS-2LE - -; http://php.net/exif.encode-jis -;exif.encode_jis = - -; http://php.net/exif.decode-jis-motorola -;exif.decode_jis_motorola = JIS - -; http://php.net/exif.decode-jis-intel -;exif.decode_jis_intel = JIS - -[Tidy] -; The path to a default tidy configuration file to use when using tidy -; http://php.net/tidy.default-config -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -; http://php.net/tidy.clean-output -tidy.clean_output = Off - -[soap] -; Enables or disables WSDL caching feature. -; http://php.net/soap.wsdl-cache-enabled -soap.wsdl_cache_enabled=1 - -; Sets the directory name where SOAP extension will put cache files. -; http://php.net/soap.wsdl-cache-dir -soap.wsdl_cache_dir="/tmp" - -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -; http://php.net/soap.wsdl-cache-ttl -soap.wsdl_cache_ttl=86400 - -; Sets the size of the cache limit. (Max. number of WSDL files to cache) -soap.wsdl_cache_limit = 5 - -[sysvshm] -; A default size of the shared memory segment -;sysvshm.init_mem = 10000 - -[ldap] -; Sets the maximum number of open links or -1 for unlimited. -ldap.max_links = -1 - -[mcrypt] -; For more information about mcrypt settings see http://php.net/mcrypt-module-open - -; Directory where to load mcrypt algorithms -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.algorithms_dir= - -; Directory where to load mcrypt modes -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.modes_dir= - -[dba] -;dba.default_handler= - -[xsl] -; Write operations from within XSLT are disabled by default. -; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44 -; Set it to 0 to allow all operations -;xsl.security_prefs = 44 - -; Local Variables: -; tab-width: 4 -; End: diff --git a/php/cli-php5.3/php.ini b/php/cli-php5.3/php.ini deleted file mode 100644 index 24e78a6c..00000000 --- a/php/cli-php5.3/php.ini +++ /dev/null @@ -1,1918 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About php.ini ; -;;;;;;;;;;;;;;;;;;; -; PHP's initialization file, generally called php.ini, is responsible for -; configuring many of the aspects of PHP's behavior. - -; PHP attempts to find and load this configuration from a number of locations. -; The following is a summary of its search order: -; 1. SAPI module specific location. -; 2. The PHPRC environment variable. (As of PHP 5.2.0) -; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) -; 4. Current working directory (except CLI) -; 5. The web server's directory (for SAPI modules), or directory of PHP -; (otherwise in Windows) -; 6. The directory from the --with-config-file-path compile time option, or the -; Windows directory (C:\windows or C:\winnt) -; See the PHP docs for more specific information. -; http://php.net/configuration.file - -; The syntax of the file is extremely simple. Whitespace and lines -; beginning with a semicolon are silently ignored (as you probably guessed). -; Section headers (e.g. [Foo]) are also silently ignored, even though -; they might mean something in the future. - -; Directives following the section heading [PATH=/www/mysite] only -; apply to PHP files in the /www/mysite directory. Directives -; following the section heading [HOST=www.example.com] only apply to -; PHP files served from www.example.com. Directives set in these -; special sections cannot be overridden by user-defined INI files or -; at runtime. Currently, [PATH=] and [HOST=] sections only work under -; CGI/FastCGI. -; http://php.net/ini.sections - -; Directives are specified using the following syntax: -; directive = value -; Directive names are *case sensitive* - foo=bar is different from FOO=bar. -; Directives are variables used to configure PHP or PHP extensions. -; There is no name validation. If PHP can't find an expected -; directive because it is not set or is mistyped, a default value will be used. - -; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one -; of the INI constants (On, Off, True, False, Yes, No and None) or an expression -; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a -; previously set variable or directive (e.g. ${foo}) - -; Expressions in the INI file are limited to bitwise operators and parentheses: -; | bitwise OR -; ^ bitwise XOR -; & bitwise AND -; ~ bitwise NOT -; ! boolean NOT - -; Boolean flags can be turned on using the values 1, On, True or Yes. -; They can be turned off using the values 0, Off, False or No. - -; An empty string can be denoted by simply not writing anything after the equal -; sign, or by using the None keyword: - -; foo = ; sets foo to an empty string -; foo = None ; sets foo to an empty string -; foo = "None" ; sets foo to the string 'None' - -; If you use constants in your value, and these constants belong to a -; dynamically loaded extension (either a PHP extension or a Zend extension), -; you may only use these constants *after* the line that loads the extension. - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; PHP comes packaged with two INI files. One that is recommended to be used -; in production environments and one that is recommended to be used in -; development environments. - -; php.ini-production contains settings which hold security, performance and -; best practices at its core. But please be aware, these settings may break -; compatibility with older or less security conscience applications. We -; recommending using the production ini in production and testing environments. - -; php.ini-development is very similar to its production variant, except it's -; much more verbose when it comes to errors. We recommending using the -; development version only in development environments as errors shown to -; application users can inadvertently leak otherwise secure information. - -;;;;;;;;;;;;;;;;;;; -; Quick Reference ; -;;;;;;;;;;;;;;;;;;; -; The following are all the settings which are different in either the production -; or development versions of the INIs with respect to PHP's default behavior. -; Please see the actual settings later in the document for more details as to why -; we recommend these changes in PHP's behavior. - -; allow_call_time_pass_reference -; Default Value: On -; Development Value: Off -; Production Value: Off - -; display_errors -; Default Value: On -; Development Value: On -; Production Value: Off - -; display_startup_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; error_reporting -; Default Value: E_ALL & ~E_NOTICE -; Development Value: E_ALL | E_STRICT -; Production Value: E_ALL & ~E_DEPRECATED - -; html_errors -; Default Value: On -; Development Value: On -; Production value: Off - -; log_errors -; Default Value: Off -; Development Value: On -; Production Value: On - -; magic_quotes_gpc -; Default Value: On -; Development Value: Off -; Production Value: Off - -; max_input_time -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) - -; output_buffering -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 - -; register_argc_argv -; Default Value: On -; Development Value: Off -; Production Value: Off - -; register_long_arrays -; Default Value: On -; Development Value: Off -; Production Value: Off - -; request_order -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" - -; session.bug_compat_42 -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.bug_compat_warn -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.gc_divisor -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 - -; session.hash_bits_per_character -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 - -; short_open_tag -; Default Value: On -; Development Value: Off -; Production Value: Off - -; track_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; url_rewriter.tags -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" - -; variables_order -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS" - -;;;;;;;;;;;;;;;;;;;; -; php.ini Options ; -;;;;;;;;;;;;;;;;;;;; -; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" -;user_ini.filename = ".user.ini" - -; To disable this feature set this option to empty value -;user_ini.filename = - -; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) -;user_ini.cache_ttl = 300 - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -; http://php.net/engine -engine = On - -; This directive determines whether or not PHP will recognize code between -; tags as PHP source which should be processed as such. It's been -; recommended for several years that you not use the short tag "short cut" and -; instead to use the full tag combination. With the wide spread use -; of XML and use of these tags by other languages, the server can become easily -; confused and end up parsing the wrong code in the wrong context. But because -; this short cut has been a feature for such a long time, it's currently still -; supported for backwards compatibility, but we recommend you don't use them. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/short-open-tag -short_open_tag = Off - -; Allow ASP-style <% %> tags. -; http://php.net/asp-tags -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -; http://php.net/precision -precision = 14 - -; Enforce year 2000 compliance (will cause problems with non-compliant browsers) -; http://php.net/y2k-compliance -y2k_compliance = On - -; Output buffering is a mechanism for controlling how much output data -; (excluding headers and cookies) PHP should keep internally before pushing that -; data to the client. If your application's output exceeds this setting, PHP -; will send that data in chunks of roughly the size you specify. -; Turning on this setting and managing its maximum buffer size can yield some -; interesting side-effects depending on your application and web server. -; You may be able to send headers and cookies after you've already sent output -; through print or echo. You also may see performance benefits if your server is -; emitting less packets due to buffered output versus PHP streaming the output -; as it gets it. On production servers, 4096 bytes is a good setting for performance -; reasons. -; Note: Output buffering can also be controlled via Output Buffering Control -; functions. -; Possible Values: -; On = Enabled and buffer is unlimited. (Use with caution) -; Off = Disabled -; Integer = Enables the buffer and sets its maximum size in bytes. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 -; http://php.net/output-buffering -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -; http://php.net/output-handler -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few hundreds bytes each as a result of -; compression. If you prefer a larger chunk size for better -; performance, enable output_buffering in addition. -; Note: You need to use zlib.output_handler instead of the standard -; output_handler, or otherwise the output will be corrupted. -; http://php.net/zlib.output-compression -zlib.output_compression = Off - -; http://php.net/zlib.output-compression-level -;zlib.output_compression_level = -1 - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -; http://php.net/zlib.output-handler -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -; http://php.net/implicit-flush -; Note: This directive is hardcoded to On for the CLI SAPI -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instantiated. A warning appears if the specified function is -; not defined, or if the function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func = - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 17 - -; This directive allows you to enable and disable warnings which PHP will issue -; if you pass a value by reference at function call time. Passing values by -; reference at function call time is a deprecated feature which will be removed -; from PHP at some point in the near future. The acceptable method for passing a -; value by reference to a function is by declaring the reference in the functions -; definition, not at call time. This directive does not disable this feature, it -; only determines whether PHP will warn you about it or not. These warnings -; should enabled in development environments only. -; Default Value: On (Suppress warnings) -; Development Value: Off (Issue warnings) -; Production Value: Off (Issue warnings) -; http://php.net/allow-call-time-pass-reference -allow_call_time_pass_reference = Off - -; Safe Mode -; http://php.net/safe-mode -safe_mode = Off - -; By default, Safe Mode does a UID compare check when -; opening files. If you want to relax this to a GID compare, -; then turn on safe_mode_gid. -; http://php.net/safe-mode-gid -safe_mode_gid = Off - -; When safe_mode is on, UID/GID checks are bypassed when -; including files from this directory and its subdirectories. -; (directory must also be in include_path or full path must -; be used when including) -; http://php.net/safe-mode-include-dir -safe_mode_include_dir = - -; When safe_mode is on, only executables located in the safe_mode_exec_dir -; will be allowed to be executed via the exec family of functions. -; http://php.net/safe-mode-exec-dir -safe_mode_exec_dir = - -; Setting certain environment variables may be a potential security breach. -; This directive contains a comma-delimited list of prefixes. In Safe Mode, -; the user may only alter environment variables whose names begin with the -; prefixes supplied here. By default, users will only be able to set -; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). -; Note: If this directive is empty, PHP will let the user modify ANY -; environment variable! -; http://php.net/safe-mode-allowed-env-vars -safe_mode_allowed_env_vars = PHP_ - -; This directive contains a comma-delimited list of environment variables that -; the end user won't be able to change using putenv(). These variables will be -; protected even if safe_mode_allowed_env_vars is set to allow to change them. -; http://php.net/safe-mode-protected-env-vars -safe_mode_protected_env_vars = LD_LIBRARY_PATH - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/open-basedir -;open_basedir = - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-functions -disable_functions = - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-classes -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; would work. -; http://php.net/syntax-highlighting -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.bg = #FFFFFF -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long requests, which may end up -; being interrupted by the user or a browser timing out. PHP's default behavior -; is to disable this feature. -; http://php.net/ignore-user-abort -;ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; http://php.net/realpath-cache-size -;realpath_cache_size = 16k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; http://php.net/realpath-cache-ttl -;realpath_cache_ttl = 120 - -; Enables or disables the circular reference collector. -; http://php.net/zend.enable-gc -zend.enable_gc = On - -;;;;;;;;;;;;;;;;; -; Miscellaneous ; -;;;;;;;;;;;;;;;;; - -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -; http://php.net/expose-php -expose_php = On - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -; Maximum execution time of each script, in seconds -; http://php.net/max-execution-time -; Note: This directive is hardcoded to 0 for the CLI SAPI -max_execution_time = 30 - -; Maximum amount of time each script may spend parsing request data. It's a good -; idea to limit this time on productions servers in order to eliminate unexpectedly -; long running scripts. -; Note: This directive is hardcoded to -1 for the CLI SAPI -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) -; http://php.net/max-input-time -max_input_time = 60 - -; Maximum input variable nesting level -; http://php.net/max-input-nesting-level -;max_input_nesting_level = 64 - -; How many GET/POST/COOKIE input variables may be accepted -; max_input_vars = 1000 - -; Maximum amount of memory a script may consume (128MB) -; http://php.net/memory-limit -memory_limit = 128M - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; This directive informs PHP of which errors, warnings and notices you would like -; it to take action for. The recommended way of setting values for this -; directive is through the use of the error level constants and bitwise -; operators. The error level constants are below here for convenience as well as -; some common settings and their meanings. -; By default, PHP is set to take action on all errors, notices and warnings EXCEPT -; those related to E_NOTICE and E_STRICT, which together cover best practices and -; recommended coding standards in PHP. For performance reasons, this is the -; recommend error reporting setting. Your production server shouldn't be wasting -; resources complaining about best practices and coding standards. That's what -; development servers and development settings are for. -; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This -; means it pretty much reports everything which is exactly what you want during -; development and early testing. -; -; Error Level Constants: -; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; E_DEPRECATED - warn about code that will not work in future versions -; of PHP -; E_USER_DEPRECATED - user-generated deprecation warnings -; -; Common Values: -; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.) -; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices) -; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) -; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.) -; Default Value: E_ALL & ~E_NOTICE -; Development Value: E_ALL | E_STRICT -; Production Value: E_ALL & ~E_DEPRECATED -; http://php.net/error-reporting -error_reporting = E_ALL | E_STRICT - -; This directive controls whether or not and where PHP will output errors, -; notices and warnings too. Error output is very useful during development, but -; it could be very dangerous in production environments. Depending on the code -; which is triggering the error, sensitive information could potentially leak -; out of your application such as database usernames and passwords or worse. -; It's recommended that errors be logged on production servers rather than -; having the errors sent to STDOUT. -; Possible Values: -; Off = Do not display any errors -; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout = Display errors to STDOUT -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/display-errors -display_errors = On - -; The display of errors which occur during PHP's startup sequence are handled -; separately from display_errors. PHP's default behavior is to suppress those -; errors from clients. Turning the display of startup errors on can be useful in -; debugging configuration problems. But, it's strongly recommended that you -; leave this setting off on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/display-startup-errors -display_startup_errors = On - -; Besides displaying errors, PHP can also log errors to locations such as a -; server-specific log, STDERR, or a location specified by the error_log -; directive found below. While errors should not be displayed on productions -; servers they should still be monitored and logging is a great way to do that. -; Default Value: Off -; Development Value: On -; Production Value: On -; http://php.net/log-errors -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -; http://php.net/log-errors-max-len -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line unless ignore_repeated_source is set true. -; http://php.net/ignore-repeated-errors -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -; http://php.net/ignore-repeated-source -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -; http://php.net/report-memleaks -report_memleaks = On - -; This setting is on by default. -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). Setting this value -; to On can assist in debugging and is appropriate for development servers. It should -; however be disabled on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/track-errors -track_errors = On - -; Turn off normal error reporting and emit XML-RPC error XML -; http://php.net/xmlrpc-errors -;xmlrpc_errors = 0 - -; An XML-RPC faultCode -;xmlrpc_error_number = 0 - -; When PHP displays or logs an error, it has the capability of inserting html -; links to documentation related to that error. This directive controls whether -; those HTML links appear in error messages or not. For performance and security -; reasons, it's recommended you disable this on production servers. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: On -; Development Value: On -; Production value: Off -; http://php.net/html-errors -html_errors = On - -; If html_errors is set On PHP produces clickable error messages that direct -; to a page describing the error or function causing the error in detail. -; You can download a copy of the PHP manual from http://php.net/docs -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. PHP's default behavior is to leave these settings empty. -; Note: Never use this feature for production boxes. -; http://php.net/docref-root -; Examples -;docref_root = "/phpmanual/" - -; http://php.net/docref-ext -;docref_ext = .html - -; String to output before an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-prepend-string -; Example: -;error_prepend_string = "" - -; String to output after an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-append-string -; Example: -;error_append_string = "" - -; Log errors to specified file. PHP's default behavior is to leave this value -; empty. -; http://php.net/error-log -; Example: -;error_log = php_errors.log -; Log errors to syslog (Event Log on NT, not valid in Windows 95). -;error_log = syslog - -;windows.show_crt_warning -; Default value: 0 -; Development value: 0 -; Production value: 0 - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; - -; The separator used in PHP generated URLs to separate arguments. -; PHP's default setting is "&". -; http://php.net/arg-separator.output -; Example: -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; PHP's default setting is "&". -; NOTE: Every character in this directive is considered as separator! -; http://php.net/arg-separator.input -; Example: -;arg_separator.input = ";&" - -; This directive determines which super global arrays are registered when PHP -; starts up. If the register_globals directive is enabled, it also determines -; what order variables are populated into the global space. G,P,C,E & S are -; abbreviations for the following respective super globals: GET, POST, COOKIE, -; ENV and SERVER. There is a performance penalty paid for the registration of -; these arrays and because ENV is not as commonly used as the others, ENV is -; is not recommended on productions servers. You can still get access to -; the environment variables through getenv() should you need to. -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS"; -; http://php.net/variables-order -variables_order = "GPCS" - -; This directive determines which super global data (G,P,C,E & S) should -; be registered into the super global array REQUEST. If so, it also determines -; the order in which that data is registered. The values for this directive are -; specified in the same manner as the variables_order directive, EXCEPT one. -; Leaving this value empty will cause PHP to use the value set in the -; variables_order directive. It does not mean it will leave the super globals -; array REQUEST empty. -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" -; http://php.net/request-order -request_order = "GP" - -; Whether or not to register the EGPCS variables as global variables. You may -; want to turn this off if you don't want to clutter your scripts' global scope -; with user data. -; You should do your best to write your scripts so that they do not require -; register_globals to be on; Using form variables as globals can easily lead -; to possible security problems, if the code is not very well thought of. -; http://php.net/register-globals -register_globals = Off - -; Determines whether the deprecated long $HTTP_*_VARS type predefined variables -; are registered by PHP or not. As they are deprecated, we obviously don't -; recommend you use them. They are on by default for compatibility reasons but -; they are not recommended on production servers. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-long-arrays -register_long_arrays = Off - -; This directive determines whether PHP registers $argv & $argc each time it -; runs. $argv contains an array of all the arguments passed to PHP when a script -; is invoked. $argc contains an integer representing the number of arguments -; that were passed when the script was invoked. These arrays are extremely -; useful when running scripts from the command line. When this directive is -; enabled, registering these variables consumes CPU cycles and memory each time -; a script is executed. For performance reasons, this feature should be disabled -; on production servers. -; Note: This directive is hardcoded to On for the CLI SAPI -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-argc-argv -register_argc_argv = Off - -; When enabled, the SERVER and ENV variables are created when they're first -; used (Just In Time) instead of when the script starts. If these variables -; are not used within a script, having this directive on will result in a -; performance gain. The PHP directives register_globals, register_long_arrays, -; and register_argc_argv must be disabled for this directive to have any affect. -; http://php.net/auto-globals-jit -auto_globals_jit = On - -; Maximum size of POST data that PHP will accept. -; http://php.net/post-max-size -post_max_size = 8M - -; Magic quotes are a preprocessing feature of PHP where PHP will attempt to -; escape any character sequences in GET, POST, COOKIE and ENV data which might -; otherwise corrupt data being placed in resources such as databases before -; making that data available to you. Because of character encoding issues and -; non-standard SQL implementations across many databases, it's not currently -; possible for this feature to be 100% accurate. PHP's default behavior is to -; enable the feature. We strongly recommend you use the escaping mechanisms -; designed specifically for the database your using instead of relying on this -; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is -; removed in PHP 5.4. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/magic-quotes-gpc -magic_quotes_gpc = Off - -; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. -; http://php.net/magic-quotes-runtime -magic_quotes_runtime = Off - -; Use Sybase-style magic quotes (escape ' with '' instead of \'). -; http://php.net/magic-quotes-sybase -magic_quotes_sybase = Off - -; Automatically add files before PHP document. -; http://php.net/auto-prepend-file -auto_prepend_file = - -; Automatically add files after PHP document. -; http://php.net/auto-append-file -auto_append_file = - -; By default, PHP will output a character encoding using -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -; http://php.net/default-mimetype -default_mimetype = "text/html" - -; PHP's default character set is set to empty. -; http://php.net/default-charset -;default_charset = "iso-8859-1" - -; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is -; to disable this feature. -; http://php.net/always-populate-raw-post-data -;always_populate_raw_post_data = On - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -include_path = ".:/usr/share/php5:/usr/share/php" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" -; -; PHP's default setting for include_path is ".;/path/to/php/pear" -; http://php.net/include-path - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -; http://php.net/doc-root -doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -; http://php.net/user-dir -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; http://php.net/extension-dir -; extension_dir = "./" -; On windows: -; extension_dir = "ext" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -; http://php.net/enable-dl -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; http://php.net/cgi.force-redirect -;cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. PHP's default behavior is to disable this feature. -;cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; http://php.net/cgi.redirect-status-env -;cgi.redirect_status_env = - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; http://php.net/cgi.fix-pathinfo -;cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; http://php.net/fastcgi.impersonate -;fastcgi.impersonate = 1 - -; Disable logging through FastCGI connection. PHP's default behavior is to enable -; this feature. -;fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -; http://php.net/cgi.rfc2616-headers -;cgi.rfc2616_headers = 0 - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -; http://php.net/file-uploads -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -; http://php.net/upload-tmp-dir -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -; http://php.net/upload-max-filesize -upload_max_filesize = 2M - -; Maximum number of files that can be uploaded via a single request -max_file_uploads = 20 - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-fopen -allow_url_fopen = On - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-include -allow_url_include = Off - -; Define the anonymous ftp password (your email address). PHP's default setting -; for this is empty. -; http://php.net/from -;from="john@doe.com" - -; Define the User-Agent string. PHP's default setting for this is empty. -; http://php.net/user-agent -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -; http://php.net/default-socket-timeout -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; http://php.net/auto-detect-line-endings -;auto_detect_line_endings = Off - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; - -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, on Windows: -; -; extension=msql.dll -; -; ... or under UNIX: -; -; extension=msql.so -; -; ... or with a path: -; -; extension=/path/to/extension/msql.so -; -; If you only provide the name of the extension, PHP will look for it in its -; default extension directory. -; -; Windows Extensions -; Note that ODBC support is built in, so no dll is needed for it. -; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) -; extension folders as well as the separate PECL DLL download (PHP 5). -; Be sure to appropriately set the extension_dir directive. -; -;extension=php_bz2.dll -;extension=php_curl.dll -;extension=php_fileinfo.dll -;extension=php_gd2.dll -;extension=php_gettext.dll -;extension=php_gmp.dll -;extension=php_intl.dll -;extension=php_imap.dll -;extension=php_interbase.dll -;extension=php_ldap.dll -;extension=php_mbstring.dll -;extension=php_exif.dll ; Must be after mbstring as it depends on it -;extension=php_mysql.dll -;extension=php_mysqli.dll -;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client -;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client -;extension=php_openssl.dll -;extension=php_pdo_firebird.dll -;extension=php_pdo_mssql.dll -;extension=php_pdo_mysql.dll -;extension=php_pdo_oci.dll -;extension=php_pdo_odbc.dll -;extension=php_pdo_pgsql.dll -;extension=php_pdo_sqlite.dll -;extension=php_pgsql.dll -;extension=php_pspell.dll -;extension=php_shmop.dll - -; The MIBS data available in the PHP distribution must be installed. -; See http://www.php.net/manual/en/snmp.installation.php -;extension=php_snmp.dll - -;extension=php_soap.dll -;extension=php_sockets.dll -;extension=php_sqlite.dll -;extension=php_sqlite3.dll -;extension=php_sybase_ct.dll -;extension=php_tidy.dll -;extension=php_xmlrpc.dll -;extension=php_xsl.dll -;extension=php_zip.dll - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[Date] -; Defines the default timezone used by the date functions -; http://php.net/date.timezone -;date.timezone = - -; http://php.net/date.default-latitude -;date.default_latitude = 31.7667 - -; http://php.net/date.default-longitude -;date.default_longitude = 35.2333 - -; http://php.net/date.sunrise-zenith -;date.sunrise_zenith = 90.583333 - -; http://php.net/date.sunset-zenith -;date.sunset_zenith = 90.583333 - -[filter] -; http://php.net/filter.default -;filter.default = unsafe_raw - -; http://php.net/filter.default-flags -;filter.default_flags = - -[iconv] -;iconv.input_encoding = ISO-8859-1 -;iconv.internal_encoding = ISO-8859-1 -;iconv.output_encoding = ISO-8859-1 - -[intl] -;intl.default_locale = -; This directive allows you to produce PHP errors when some error -; happens within intl functions. The value is the level of the error produced. -; Default is 0, which does not produce any errors. -;intl.error_level = E_WARNING - -[sqlite] -; http://php.net/sqlite.assoc-case -;sqlite.assoc_case = 0 - -[sqlite3] -;sqlite3.extension_dir = - -[Pcre] -;PCRE library backtracking limit. -; http://php.net/pcre.backtrack-limit -;pcre.backtrack_limit=100000 - -;PCRE library recursion limit. -;Please note that if you set this value to a high number you may consume all -;the available process stack and eventually crash PHP (due to reaching the -;stack size limit imposed by the Operating System). -; http://php.net/pcre.recursion-limit -;pcre.recursion_limit=100000 - -[Pdo] -; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" -; http://php.net/pdo-odbc.connection-pooling -;pdo_odbc.connection_pooling=strict - -;pdo_odbc.db2_instance_name - -[Pdo_mysql] -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/pdo_mysql.cache_size -pdo_mysql.cache_size = 2000 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/pdo_mysql.default-socket -pdo_mysql.default_socket= - -[Phar] -; http://php.net/phar.readonly -;phar.readonly = On - -; http://php.net/phar.require-hash -;phar.require_hash = On - -;phar.cache_list = - -[Syslog] -; Whether or not to define the various syslog variables (e.g. $LOG_PID, -; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In -; runtime, you can define these variables by calling define_syslog_variables(). -; http://php.net/define-syslog-variables -define_syslog_variables = Off - -[mail function] -; For Win32 only. -; http://php.net/smtp -SMTP = localhost -; http://php.net/smtp-port -smtp_port = 25 - -; For Win32 only. -; http://php.net/sendmail-from -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -; http://php.net/sendmail-path -;sendmail_path = - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(), even in safe mode. -;mail.force_extra_parameters = - -; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename -mail.add_x_header = On - -; The path to a log file that will log all mail() calls. Log entries include -; the full path of the script, line number, To address and headers. -;mail.log = - -[SQL] -; http://php.net/sql.safe-mode -sql.safe_mode = Off - -[ODBC] -; http://php.net/odbc.default-db -;odbc.default_db = Not yet implemented - -; http://php.net/odbc.default-user -;odbc.default_user = Not yet implemented - -; http://php.net/odbc.default-pw -;odbc.default_pw = Not yet implemented - -; Controls the ODBC cursor model. -; Default: SQL_CURSOR_STATIC (default). -;odbc.default_cursortype - -; Allow or prevent persistent links. -; http://php.net/odbc.allow-persistent -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -; http://php.net/odbc.check-persistent -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/odbc.max-persistent -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/odbc.max-links -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -; http://php.net/odbc.defaultlrl -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of odbc.defaultlrl and odbc.defaultbinmode -; http://php.net/odbc.defaultbinmode -odbc.defaultbinmode = 1 - -;birdstep.max_links = -1 - -[Interbase] -; Allow or prevent persistent links. -ibase.allow_persistent = 1 - -; Maximum number of persistent links. -1 means no limit. -ibase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ibase.max_links = -1 - -; Default database name for ibase_connect(). -;ibase.default_db = - -; Default username for ibase_connect(). -;ibase.default_user = - -; Default password for ibase_connect(). -;ibase.default_password = - -; Default charset for ibase_connect(). -;ibase.default_charset = - -; Default timestamp format. -ibase.timestampformat = "%Y-%m-%d %H:%M:%S" - -; Default date format. -ibase.dateformat = "%Y-%m-%d" - -; Default time format. -ibase.timeformat = "%H:%M:%S" - -[MySQL] -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysql.allow_local_infile -mysql.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysql.allow-persistent -mysql.allow_persistent = On - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysql.cache_size -mysql.cache_size = 2000 - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysql.max-persistent -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/mysql.max-links -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysql.default-port -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysql.default-socket -mysql.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-host -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-user -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysql.default-password -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -; http://php.net/mysql.connect-timeout -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -; http://php.net/mysql.trace-mode -mysql.trace_mode = Off - -[MySQLi] - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysqli.max-persistent -mysqli.max_persistent = -1 - -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysqli.allow_local_infile -;mysqli.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysqli.allow-persistent -mysqli.allow_persistent = On - -; Maximum number of links. -1 means no limit. -; http://php.net/mysqli.max-links -mysqli.max_links = -1 - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysqli.cache_size -mysqli.cache_size = 2000 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysqli.default-port -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysqli.default-socket -mysqli.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-host -mysqli.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-user -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysqli.default-pw -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off - -[mysqlnd] -; Enable / Disable collection of general statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_statistics -mysqlnd.collect_statistics = On - -; Enable / Disable collection of memory usage statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_memory_statistics -mysqlnd.collect_memory_statistics = On - -; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. -; http://php.net/mysqlnd.net_cmd_buffer_size -;mysqlnd.net_cmd_buffer_size = 2048 - -; Size of a pre-allocated buffer used for reading data sent by the server in -; bytes. -; http://php.net/mysqlnd.net_read_buffer_size -;mysqlnd.net_read_buffer_size = 32768 - -[OCI8] - -; Connection: Enables privileged connections using external -; credentials (OCI_SYSOPER, OCI_SYSDBA) -; http://php.net/oci8.privileged-connect -;oci8.privileged_connect = Off - -; Connection: The maximum number of persistent OCI8 connections per -; process. Using -1 means no limit. -; http://php.net/oci8.max-persistent -;oci8.max_persistent = -1 - -; Connection: The maximum number of seconds a process is allowed to -; maintain an idle persistent connection. Using -1 means idle -; persistent connections will be maintained forever. -; http://php.net/oci8.persistent-timeout -;oci8.persistent_timeout = -1 - -; Connection: The number of seconds that must pass before issuing a -; ping during oci_pconnect() to check the connection validity. When -; set to 0, each oci_pconnect() will cause a ping. Using -1 disables -; pings completely. -; http://php.net/oci8.ping-interval -;oci8.ping_interval = 60 - -; Connection: Set this to a user chosen connection class to be used -; for all pooled server requests with Oracle 11g Database Resident -; Connection Pooling (DRCP). To use DRCP, this value should be set to -; the same string for all web servers running the same application, -; the database pool must be configured, and the connection string must -; specify to use a pooled server. -;oci8.connection_class = - -; High Availability: Using On lets PHP receive Fast Application -; Notification (FAN) events generated when a database node fails. The -; database must also be configured to post FAN events. -;oci8.events = Off - -; Tuning: This option enables statement caching, and specifies how -; many statements to cache. Using 0 disables statement caching. -; http://php.net/oci8.statement-cache-size -;oci8.statement_cache_size = 20 - -; Tuning: Enables statement prefetching and sets the default number of -; rows that will be fetched automatically after statement execution. -; http://php.net/oci8.default-prefetch -;oci8.default_prefetch = 100 - -; Compatibility. Using On means oci_close() will not close -; oci_connect() and oci_new_connect() connections. -; http://php.net/oci8.old-oci-close-semantics -;oci8.old_oci_close_semantics = Off - -[PostgreSQL] -; Allow or prevent persistent links. -; http://php.net/pgsql.allow-persistent -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -; http://php.net/pgsql.auto-reset-persistent -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/pgsql.max-persistent -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -; http://php.net/pgsql.max-links -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -; http://php.net/pgsql.ignore-notice -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Notice message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -; http://php.net/pgsql.log-notice -pgsql.log_notice = 0 - -[Sybase-CT] -; Allow or prevent persistent links. -; http://php.net/sybct.allow-persistent -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/sybct.max-persistent -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/sybct.max-links -sybct.max_links = -1 - -; Minimum server message severity to display. -; http://php.net/sybct.min-server-severity -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -; http://php.net/sybct.min-client-severity -sybct.min_client_severity = 10 - -; Set per-context timeout -; http://php.net/sybct.timeout -;sybct.timeout= - -;sybct.packet_size - -; The maximum time in seconds to wait for a connection attempt to succeed before returning failure. -; Default: one minute -;sybct.login_timeout= - -; The name of the host you claim to be connecting from, for display by sp_who. -; Default: none -;sybct.hostname= - -; Allows you to define how often deadlocks are to be retried. -1 means "forever". -; Default: 0 -;sybct.deadlock_retry_count= - -[bcmath] -; Number of decimal digits for all bcmath functions. -; http://php.net/bcmath.scale -bcmath.scale = 0 - -[browscap] -; http://php.net/browscap -;browscap = extra/browscap.ini - -[Session] -; Handler used to store/retrieve data. -; http://php.net/session.save-handler -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -; -; The path can be defined as: -; -; session.save_path = "N;/path" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if you -; or your OS have problems with lots of files in one directory, and is -; a more efficient layout for servers that handle lots of sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -; http://php.net/session.save-path -session.save_path = "/tmp" - -; Whether to use cookies. -; http://php.net/session.use-cookies -session.use_cookies = 1 - -; http://php.net/session.cookie-secure -;session.cookie_secure = - -; This option forces PHP to fetch and use a cookie for storing and maintaining -; the session id. We encourage this operation as it's very helpful in combating -; session hijacking when not specifying and managing your own session id. It is -; not the end all be all of session hijacking defense, but it's a good start. -; http://php.net/session.use-only-cookies -session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -; http://php.net/session.name -session.name = PHPSESSID - -; Initialize session on request startup. -; http://php.net/session.auto-start -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -; http://php.net/session.cookie-lifetime -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -; http://php.net/session.cookie-path -session.cookie_path = / - -; The domain for which the cookie is valid. -; http://php.net/session.cookie-domain -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. -; http://php.net/session.cookie-httponly -session.cookie_httponly = - -; Handler used to serialize data. php is the standard serializer of PHP. -; http://php.net/session.serialize-handler -session.serialize_handler = php - -; Defines the probability that the 'garbage collection' process is started -; on every session initialization. The probability is calculated by using -; gc_probability/gc_divisor. Where session.gc_probability is the numerator -; and gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.gc-probability -session.gc_probability = 1 - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using the following equation: -; gc_probability/gc_divisor. Where session.gc_probability is the numerator and -; session.gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. Increasing this value to 1000 will give you -; a 0.1% chance the gc will run on any give request. For high volume production servers, -; this is a more efficient approach. -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 -; http://php.net/session.gc-divisor -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -; http://php.net/session.gc-maxlifetime -session.gc_maxlifetime = 1440 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script would is the equivalent of -; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; find /path/to/sessions -cmin +24 | xargs rm - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope, even when register_globals -; is disabled. PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. This feature -; introduces some serious security problems if not handled correctly. It's -; recommended that you do not use this feature on production servers. But you -; should enable this on development servers and enable the warning as well. If you -; do not enable the feature on development servers, you won't be warned when it's -; used and debugging errors caused by this can be difficult to track down. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-42 -session.bug_compat_42 = On - -; This setting controls whether or not you are warned by PHP when initializing a -; session value into the global space. session.bug_compat_42 must be enabled before -; these warnings can be issued by PHP. See the directive above for more information. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-warn -session.bug_compat_warn = On - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -; http://php.net/session.referer-check -session.referer_check = - -; How many bytes to read from the file. -; http://php.net/session.entropy-length -session.entropy_length = 0 - -; Specified here to create the session id. -; http://php.net/session.entropy-file -; On systems that don't have /dev/urandom /dev/arandom can be used -; On windows, setting the entropy_length setting will activate the -; Windows random source (using the CryptoAPI) -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -; http://php.net/session.cache-limiter -session.cache_limiter = nocache - -; Document expires after n minutes. -; http://php.net/session.cache-expire -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publicly accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -; http://php.net/session.use-trans-sid -session.use_trans_sid = 0 - -; Select a hash function for use in generating session ids. -; Possible Values -; 0 (MD5 128 bits) -; 1 (SHA-1 160 bits) -; This option may also be set to the name of any hash function supported by -; the hash extension. A list of available hashes is returned by the hash_algos() -; function. -; http://php.net/session.hash-function -session.hash_function = 0 - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; Possible values: -; 4 (4 bits: 0-9, a-f) -; 5 (5 bits: 0-9, a-v) -; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 -; http://php.net/session.hash-bits-per-character -session.hash_bits_per_character = 5 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; http://php.net/url-rewriter.tags -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatibility mode with old versions of PHP 3.0. -mssql.compatability_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. -1 = library default -; msdlib defaults to 25 -; FreeTDS defaults to 4096 -;mssql.max_procs = -1 - -; Specify client character set. -; If empty or not set the client charset from freetds.conf is used -; This is only used when compiled with FreeTDS -;mssql.charset = "ISO-8859-1" - -[Assertion] -; Assert(expr); active by default. -; http://php.net/assert.active -;assert.active = On - -; Issue a PHP warning for each failed assertion. -; http://php.net/assert.warning -;assert.warning = On - -; Don't bail out by default. -; http://php.net/assert.bail -;assert.bail = Off - -; User-function to be called if an assertion fails. -; http://php.net/assert.callback -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -; http://php.net/assert.quiet-eval -;assert.quiet_eval = 0 - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -; http://php.net/com.typelib-file -;com.typelib_file = - -; allow Distributed-COM calls -; http://php.net/com.allow-dcom -;com.allow_dcom = true - -; autoregister constants of a components typlib on com_load() -; http://php.net/com.autoregister-typelib -;com.autoregister_typelib = true - -; register constants casesensitive -; http://php.net/com.autoregister-casesensitive -;com.autoregister_casesensitive = false - -; show warnings on duplicate constant registrations -; http://php.net/com.autoregister-verbose -;com.autoregister_verbose = true - -; The default character set code-page to use when passing strings to and from COM objects. -; Default: system ANSI code page -;com.code_page= - -[mbstring] -; language for internal character representation. -; http://php.net/mbstring.language -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -; http://php.net/mbstring.internal-encoding -;mbstring.internal_encoding = EUC-JP - -; http input encoding. -; http://php.net/mbstring.http-input -;mbstring.http_input = auto - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -; http://php.net/mbstring.http-output -;mbstring.http_output = SJIS - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -; http://php.net/mbstring.encoding-translation -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -; http://php.net/mbstring.detect-order -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -; http://php.net/mbstring.substitute-character -;mbstring.substitute_character = none; - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -; http://php.net/mbstring.func-overload -;mbstring.func_overload = 0 - -; enable strict encoding detection. -;mbstring.strict_detection = Off - -; This directive specifies the regex pattern of content types for which mb_output_handler() -; is activated. -; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) -;mbstring.http_output_conv_mimetype= - -; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte -; Default: "" -;mbstring.script_encoding= - -[gd] -; Tell the jpeg decode to ignore warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -; http://php.net/gd.jpeg-ignore-warning -;gd.jpeg_ignore_warning = 0 - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -; http://php.net/exif.encode-unicode -;exif.encode_unicode = ISO-8859-15 - -; http://php.net/exif.decode-unicode-motorola -;exif.decode_unicode_motorola = UCS-2BE - -; http://php.net/exif.decode-unicode-intel -;exif.decode_unicode_intel = UCS-2LE - -; http://php.net/exif.encode-jis -;exif.encode_jis = - -; http://php.net/exif.decode-jis-motorola -;exif.decode_jis_motorola = JIS - -; http://php.net/exif.decode-jis-intel -;exif.decode_jis_intel = JIS - -[Tidy] -; The path to a default tidy configuration file to use when using tidy -; http://php.net/tidy.default-config -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -; http://php.net/tidy.clean-output -tidy.clean_output = Off - -[soap] -; Enables or disables WSDL caching feature. -; http://php.net/soap.wsdl-cache-enabled -soap.wsdl_cache_enabled=1 - -; Sets the directory name where SOAP extension will put cache files. -; http://php.net/soap.wsdl-cache-dir -soap.wsdl_cache_dir="/tmp" - -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -; http://php.net/soap.wsdl-cache-ttl -soap.wsdl_cache_ttl=86400 - -; Sets the size of the cache limit. (Max. number of WSDL files to cache) -soap.wsdl_cache_limit = 5 - -[sysvshm] -; A default size of the shared memory segment -;sysvshm.init_mem = 10000 - -[ldap] -; Sets the maximum number of open links or -1 for unlimited. -ldap.max_links = -1 - -[mcrypt] -; For more information about mcrypt settings see http://php.net/mcrypt-module-open - -; Directory where to load mcrypt algorithms -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.algorithms_dir= - -; Directory where to load mcrypt modes -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.modes_dir= - -[dba] -;dba.default_handler= - -[xsl] -; Write operations from within XSLT are disabled by default. -; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44 -; Set it to 0 to allow all operations -;xsl.security_prefs = 44 - -; Local Variables: -; tab-width: 4 -; End: diff --git a/php/embed-php5.3/php.ini b/php/embed-php5.3/php.ini deleted file mode 100644 index 24e78a6c..00000000 --- a/php/embed-php5.3/php.ini +++ /dev/null @@ -1,1918 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About php.ini ; -;;;;;;;;;;;;;;;;;;; -; PHP's initialization file, generally called php.ini, is responsible for -; configuring many of the aspects of PHP's behavior. - -; PHP attempts to find and load this configuration from a number of locations. -; The following is a summary of its search order: -; 1. SAPI module specific location. -; 2. The PHPRC environment variable. (As of PHP 5.2.0) -; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) -; 4. Current working directory (except CLI) -; 5. The web server's directory (for SAPI modules), or directory of PHP -; (otherwise in Windows) -; 6. The directory from the --with-config-file-path compile time option, or the -; Windows directory (C:\windows or C:\winnt) -; See the PHP docs for more specific information. -; http://php.net/configuration.file - -; The syntax of the file is extremely simple. Whitespace and lines -; beginning with a semicolon are silently ignored (as you probably guessed). -; Section headers (e.g. [Foo]) are also silently ignored, even though -; they might mean something in the future. - -; Directives following the section heading [PATH=/www/mysite] only -; apply to PHP files in the /www/mysite directory. Directives -; following the section heading [HOST=www.example.com] only apply to -; PHP files served from www.example.com. Directives set in these -; special sections cannot be overridden by user-defined INI files or -; at runtime. Currently, [PATH=] and [HOST=] sections only work under -; CGI/FastCGI. -; http://php.net/ini.sections - -; Directives are specified using the following syntax: -; directive = value -; Directive names are *case sensitive* - foo=bar is different from FOO=bar. -; Directives are variables used to configure PHP or PHP extensions. -; There is no name validation. If PHP can't find an expected -; directive because it is not set or is mistyped, a default value will be used. - -; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one -; of the INI constants (On, Off, True, False, Yes, No and None) or an expression -; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a -; previously set variable or directive (e.g. ${foo}) - -; Expressions in the INI file are limited to bitwise operators and parentheses: -; | bitwise OR -; ^ bitwise XOR -; & bitwise AND -; ~ bitwise NOT -; ! boolean NOT - -; Boolean flags can be turned on using the values 1, On, True or Yes. -; They can be turned off using the values 0, Off, False or No. - -; An empty string can be denoted by simply not writing anything after the equal -; sign, or by using the None keyword: - -; foo = ; sets foo to an empty string -; foo = None ; sets foo to an empty string -; foo = "None" ; sets foo to the string 'None' - -; If you use constants in your value, and these constants belong to a -; dynamically loaded extension (either a PHP extension or a Zend extension), -; you may only use these constants *after* the line that loads the extension. - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; PHP comes packaged with two INI files. One that is recommended to be used -; in production environments and one that is recommended to be used in -; development environments. - -; php.ini-production contains settings which hold security, performance and -; best practices at its core. But please be aware, these settings may break -; compatibility with older or less security conscience applications. We -; recommending using the production ini in production and testing environments. - -; php.ini-development is very similar to its production variant, except it's -; much more verbose when it comes to errors. We recommending using the -; development version only in development environments as errors shown to -; application users can inadvertently leak otherwise secure information. - -;;;;;;;;;;;;;;;;;;; -; Quick Reference ; -;;;;;;;;;;;;;;;;;;; -; The following are all the settings which are different in either the production -; or development versions of the INIs with respect to PHP's default behavior. -; Please see the actual settings later in the document for more details as to why -; we recommend these changes in PHP's behavior. - -; allow_call_time_pass_reference -; Default Value: On -; Development Value: Off -; Production Value: Off - -; display_errors -; Default Value: On -; Development Value: On -; Production Value: Off - -; display_startup_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; error_reporting -; Default Value: E_ALL & ~E_NOTICE -; Development Value: E_ALL | E_STRICT -; Production Value: E_ALL & ~E_DEPRECATED - -; html_errors -; Default Value: On -; Development Value: On -; Production value: Off - -; log_errors -; Default Value: Off -; Development Value: On -; Production Value: On - -; magic_quotes_gpc -; Default Value: On -; Development Value: Off -; Production Value: Off - -; max_input_time -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) - -; output_buffering -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 - -; register_argc_argv -; Default Value: On -; Development Value: Off -; Production Value: Off - -; register_long_arrays -; Default Value: On -; Development Value: Off -; Production Value: Off - -; request_order -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" - -; session.bug_compat_42 -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.bug_compat_warn -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.gc_divisor -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 - -; session.hash_bits_per_character -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 - -; short_open_tag -; Default Value: On -; Development Value: Off -; Production Value: Off - -; track_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; url_rewriter.tags -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" - -; variables_order -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS" - -;;;;;;;;;;;;;;;;;;;; -; php.ini Options ; -;;;;;;;;;;;;;;;;;;;; -; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" -;user_ini.filename = ".user.ini" - -; To disable this feature set this option to empty value -;user_ini.filename = - -; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) -;user_ini.cache_ttl = 300 - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -; http://php.net/engine -engine = On - -; This directive determines whether or not PHP will recognize code between -; tags as PHP source which should be processed as such. It's been -; recommended for several years that you not use the short tag "short cut" and -; instead to use the full tag combination. With the wide spread use -; of XML and use of these tags by other languages, the server can become easily -; confused and end up parsing the wrong code in the wrong context. But because -; this short cut has been a feature for such a long time, it's currently still -; supported for backwards compatibility, but we recommend you don't use them. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/short-open-tag -short_open_tag = Off - -; Allow ASP-style <% %> tags. -; http://php.net/asp-tags -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -; http://php.net/precision -precision = 14 - -; Enforce year 2000 compliance (will cause problems with non-compliant browsers) -; http://php.net/y2k-compliance -y2k_compliance = On - -; Output buffering is a mechanism for controlling how much output data -; (excluding headers and cookies) PHP should keep internally before pushing that -; data to the client. If your application's output exceeds this setting, PHP -; will send that data in chunks of roughly the size you specify. -; Turning on this setting and managing its maximum buffer size can yield some -; interesting side-effects depending on your application and web server. -; You may be able to send headers and cookies after you've already sent output -; through print or echo. You also may see performance benefits if your server is -; emitting less packets due to buffered output versus PHP streaming the output -; as it gets it. On production servers, 4096 bytes is a good setting for performance -; reasons. -; Note: Output buffering can also be controlled via Output Buffering Control -; functions. -; Possible Values: -; On = Enabled and buffer is unlimited. (Use with caution) -; Off = Disabled -; Integer = Enables the buffer and sets its maximum size in bytes. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 -; http://php.net/output-buffering -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -; http://php.net/output-handler -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few hundreds bytes each as a result of -; compression. If you prefer a larger chunk size for better -; performance, enable output_buffering in addition. -; Note: You need to use zlib.output_handler instead of the standard -; output_handler, or otherwise the output will be corrupted. -; http://php.net/zlib.output-compression -zlib.output_compression = Off - -; http://php.net/zlib.output-compression-level -;zlib.output_compression_level = -1 - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -; http://php.net/zlib.output-handler -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -; http://php.net/implicit-flush -; Note: This directive is hardcoded to On for the CLI SAPI -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instantiated. A warning appears if the specified function is -; not defined, or if the function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func = - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 17 - -; This directive allows you to enable and disable warnings which PHP will issue -; if you pass a value by reference at function call time. Passing values by -; reference at function call time is a deprecated feature which will be removed -; from PHP at some point in the near future. The acceptable method for passing a -; value by reference to a function is by declaring the reference in the functions -; definition, not at call time. This directive does not disable this feature, it -; only determines whether PHP will warn you about it or not. These warnings -; should enabled in development environments only. -; Default Value: On (Suppress warnings) -; Development Value: Off (Issue warnings) -; Production Value: Off (Issue warnings) -; http://php.net/allow-call-time-pass-reference -allow_call_time_pass_reference = Off - -; Safe Mode -; http://php.net/safe-mode -safe_mode = Off - -; By default, Safe Mode does a UID compare check when -; opening files. If you want to relax this to a GID compare, -; then turn on safe_mode_gid. -; http://php.net/safe-mode-gid -safe_mode_gid = Off - -; When safe_mode is on, UID/GID checks are bypassed when -; including files from this directory and its subdirectories. -; (directory must also be in include_path or full path must -; be used when including) -; http://php.net/safe-mode-include-dir -safe_mode_include_dir = - -; When safe_mode is on, only executables located in the safe_mode_exec_dir -; will be allowed to be executed via the exec family of functions. -; http://php.net/safe-mode-exec-dir -safe_mode_exec_dir = - -; Setting certain environment variables may be a potential security breach. -; This directive contains a comma-delimited list of prefixes. In Safe Mode, -; the user may only alter environment variables whose names begin with the -; prefixes supplied here. By default, users will only be able to set -; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). -; Note: If this directive is empty, PHP will let the user modify ANY -; environment variable! -; http://php.net/safe-mode-allowed-env-vars -safe_mode_allowed_env_vars = PHP_ - -; This directive contains a comma-delimited list of environment variables that -; the end user won't be able to change using putenv(). These variables will be -; protected even if safe_mode_allowed_env_vars is set to allow to change them. -; http://php.net/safe-mode-protected-env-vars -safe_mode_protected_env_vars = LD_LIBRARY_PATH - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/open-basedir -;open_basedir = - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-functions -disable_functions = - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-classes -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; would work. -; http://php.net/syntax-highlighting -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.bg = #FFFFFF -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long requests, which may end up -; being interrupted by the user or a browser timing out. PHP's default behavior -; is to disable this feature. -; http://php.net/ignore-user-abort -;ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; http://php.net/realpath-cache-size -;realpath_cache_size = 16k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; http://php.net/realpath-cache-ttl -;realpath_cache_ttl = 120 - -; Enables or disables the circular reference collector. -; http://php.net/zend.enable-gc -zend.enable_gc = On - -;;;;;;;;;;;;;;;;; -; Miscellaneous ; -;;;;;;;;;;;;;;;;; - -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -; http://php.net/expose-php -expose_php = On - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -; Maximum execution time of each script, in seconds -; http://php.net/max-execution-time -; Note: This directive is hardcoded to 0 for the CLI SAPI -max_execution_time = 30 - -; Maximum amount of time each script may spend parsing request data. It's a good -; idea to limit this time on productions servers in order to eliminate unexpectedly -; long running scripts. -; Note: This directive is hardcoded to -1 for the CLI SAPI -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) -; http://php.net/max-input-time -max_input_time = 60 - -; Maximum input variable nesting level -; http://php.net/max-input-nesting-level -;max_input_nesting_level = 64 - -; How many GET/POST/COOKIE input variables may be accepted -; max_input_vars = 1000 - -; Maximum amount of memory a script may consume (128MB) -; http://php.net/memory-limit -memory_limit = 128M - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; This directive informs PHP of which errors, warnings and notices you would like -; it to take action for. The recommended way of setting values for this -; directive is through the use of the error level constants and bitwise -; operators. The error level constants are below here for convenience as well as -; some common settings and their meanings. -; By default, PHP is set to take action on all errors, notices and warnings EXCEPT -; those related to E_NOTICE and E_STRICT, which together cover best practices and -; recommended coding standards in PHP. For performance reasons, this is the -; recommend error reporting setting. Your production server shouldn't be wasting -; resources complaining about best practices and coding standards. That's what -; development servers and development settings are for. -; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This -; means it pretty much reports everything which is exactly what you want during -; development and early testing. -; -; Error Level Constants: -; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; E_DEPRECATED - warn about code that will not work in future versions -; of PHP -; E_USER_DEPRECATED - user-generated deprecation warnings -; -; Common Values: -; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.) -; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices) -; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) -; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.) -; Default Value: E_ALL & ~E_NOTICE -; Development Value: E_ALL | E_STRICT -; Production Value: E_ALL & ~E_DEPRECATED -; http://php.net/error-reporting -error_reporting = E_ALL | E_STRICT - -; This directive controls whether or not and where PHP will output errors, -; notices and warnings too. Error output is very useful during development, but -; it could be very dangerous in production environments. Depending on the code -; which is triggering the error, sensitive information could potentially leak -; out of your application such as database usernames and passwords or worse. -; It's recommended that errors be logged on production servers rather than -; having the errors sent to STDOUT. -; Possible Values: -; Off = Do not display any errors -; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout = Display errors to STDOUT -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/display-errors -display_errors = On - -; The display of errors which occur during PHP's startup sequence are handled -; separately from display_errors. PHP's default behavior is to suppress those -; errors from clients. Turning the display of startup errors on can be useful in -; debugging configuration problems. But, it's strongly recommended that you -; leave this setting off on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/display-startup-errors -display_startup_errors = On - -; Besides displaying errors, PHP can also log errors to locations such as a -; server-specific log, STDERR, or a location specified by the error_log -; directive found below. While errors should not be displayed on productions -; servers they should still be monitored and logging is a great way to do that. -; Default Value: Off -; Development Value: On -; Production Value: On -; http://php.net/log-errors -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -; http://php.net/log-errors-max-len -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line unless ignore_repeated_source is set true. -; http://php.net/ignore-repeated-errors -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -; http://php.net/ignore-repeated-source -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -; http://php.net/report-memleaks -report_memleaks = On - -; This setting is on by default. -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). Setting this value -; to On can assist in debugging and is appropriate for development servers. It should -; however be disabled on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/track-errors -track_errors = On - -; Turn off normal error reporting and emit XML-RPC error XML -; http://php.net/xmlrpc-errors -;xmlrpc_errors = 0 - -; An XML-RPC faultCode -;xmlrpc_error_number = 0 - -; When PHP displays or logs an error, it has the capability of inserting html -; links to documentation related to that error. This directive controls whether -; those HTML links appear in error messages or not. For performance and security -; reasons, it's recommended you disable this on production servers. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: On -; Development Value: On -; Production value: Off -; http://php.net/html-errors -html_errors = On - -; If html_errors is set On PHP produces clickable error messages that direct -; to a page describing the error or function causing the error in detail. -; You can download a copy of the PHP manual from http://php.net/docs -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. PHP's default behavior is to leave these settings empty. -; Note: Never use this feature for production boxes. -; http://php.net/docref-root -; Examples -;docref_root = "/phpmanual/" - -; http://php.net/docref-ext -;docref_ext = .html - -; String to output before an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-prepend-string -; Example: -;error_prepend_string = "" - -; String to output after an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-append-string -; Example: -;error_append_string = "" - -; Log errors to specified file. PHP's default behavior is to leave this value -; empty. -; http://php.net/error-log -; Example: -;error_log = php_errors.log -; Log errors to syslog (Event Log on NT, not valid in Windows 95). -;error_log = syslog - -;windows.show_crt_warning -; Default value: 0 -; Development value: 0 -; Production value: 0 - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; - -; The separator used in PHP generated URLs to separate arguments. -; PHP's default setting is "&". -; http://php.net/arg-separator.output -; Example: -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; PHP's default setting is "&". -; NOTE: Every character in this directive is considered as separator! -; http://php.net/arg-separator.input -; Example: -;arg_separator.input = ";&" - -; This directive determines which super global arrays are registered when PHP -; starts up. If the register_globals directive is enabled, it also determines -; what order variables are populated into the global space. G,P,C,E & S are -; abbreviations for the following respective super globals: GET, POST, COOKIE, -; ENV and SERVER. There is a performance penalty paid for the registration of -; these arrays and because ENV is not as commonly used as the others, ENV is -; is not recommended on productions servers. You can still get access to -; the environment variables through getenv() should you need to. -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS"; -; http://php.net/variables-order -variables_order = "GPCS" - -; This directive determines which super global data (G,P,C,E & S) should -; be registered into the super global array REQUEST. If so, it also determines -; the order in which that data is registered. The values for this directive are -; specified in the same manner as the variables_order directive, EXCEPT one. -; Leaving this value empty will cause PHP to use the value set in the -; variables_order directive. It does not mean it will leave the super globals -; array REQUEST empty. -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" -; http://php.net/request-order -request_order = "GP" - -; Whether or not to register the EGPCS variables as global variables. You may -; want to turn this off if you don't want to clutter your scripts' global scope -; with user data. -; You should do your best to write your scripts so that they do not require -; register_globals to be on; Using form variables as globals can easily lead -; to possible security problems, if the code is not very well thought of. -; http://php.net/register-globals -register_globals = Off - -; Determines whether the deprecated long $HTTP_*_VARS type predefined variables -; are registered by PHP or not. As they are deprecated, we obviously don't -; recommend you use them. They are on by default for compatibility reasons but -; they are not recommended on production servers. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-long-arrays -register_long_arrays = Off - -; This directive determines whether PHP registers $argv & $argc each time it -; runs. $argv contains an array of all the arguments passed to PHP when a script -; is invoked. $argc contains an integer representing the number of arguments -; that were passed when the script was invoked. These arrays are extremely -; useful when running scripts from the command line. When this directive is -; enabled, registering these variables consumes CPU cycles and memory each time -; a script is executed. For performance reasons, this feature should be disabled -; on production servers. -; Note: This directive is hardcoded to On for the CLI SAPI -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-argc-argv -register_argc_argv = Off - -; When enabled, the SERVER and ENV variables are created when they're first -; used (Just In Time) instead of when the script starts. If these variables -; are not used within a script, having this directive on will result in a -; performance gain. The PHP directives register_globals, register_long_arrays, -; and register_argc_argv must be disabled for this directive to have any affect. -; http://php.net/auto-globals-jit -auto_globals_jit = On - -; Maximum size of POST data that PHP will accept. -; http://php.net/post-max-size -post_max_size = 8M - -; Magic quotes are a preprocessing feature of PHP where PHP will attempt to -; escape any character sequences in GET, POST, COOKIE and ENV data which might -; otherwise corrupt data being placed in resources such as databases before -; making that data available to you. Because of character encoding issues and -; non-standard SQL implementations across many databases, it's not currently -; possible for this feature to be 100% accurate. PHP's default behavior is to -; enable the feature. We strongly recommend you use the escaping mechanisms -; designed specifically for the database your using instead of relying on this -; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is -; removed in PHP 5.4. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/magic-quotes-gpc -magic_quotes_gpc = Off - -; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. -; http://php.net/magic-quotes-runtime -magic_quotes_runtime = Off - -; Use Sybase-style magic quotes (escape ' with '' instead of \'). -; http://php.net/magic-quotes-sybase -magic_quotes_sybase = Off - -; Automatically add files before PHP document. -; http://php.net/auto-prepend-file -auto_prepend_file = - -; Automatically add files after PHP document. -; http://php.net/auto-append-file -auto_append_file = - -; By default, PHP will output a character encoding using -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -; http://php.net/default-mimetype -default_mimetype = "text/html" - -; PHP's default character set is set to empty. -; http://php.net/default-charset -;default_charset = "iso-8859-1" - -; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is -; to disable this feature. -; http://php.net/always-populate-raw-post-data -;always_populate_raw_post_data = On - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -include_path = ".:/usr/share/php5:/usr/share/php" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" -; -; PHP's default setting for include_path is ".;/path/to/php/pear" -; http://php.net/include-path - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -; http://php.net/doc-root -doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -; http://php.net/user-dir -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; http://php.net/extension-dir -; extension_dir = "./" -; On windows: -; extension_dir = "ext" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -; http://php.net/enable-dl -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; http://php.net/cgi.force-redirect -;cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. PHP's default behavior is to disable this feature. -;cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; http://php.net/cgi.redirect-status-env -;cgi.redirect_status_env = - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; http://php.net/cgi.fix-pathinfo -;cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; http://php.net/fastcgi.impersonate -;fastcgi.impersonate = 1 - -; Disable logging through FastCGI connection. PHP's default behavior is to enable -; this feature. -;fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -; http://php.net/cgi.rfc2616-headers -;cgi.rfc2616_headers = 0 - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -; http://php.net/file-uploads -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -; http://php.net/upload-tmp-dir -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -; http://php.net/upload-max-filesize -upload_max_filesize = 2M - -; Maximum number of files that can be uploaded via a single request -max_file_uploads = 20 - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-fopen -allow_url_fopen = On - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-include -allow_url_include = Off - -; Define the anonymous ftp password (your email address). PHP's default setting -; for this is empty. -; http://php.net/from -;from="john@doe.com" - -; Define the User-Agent string. PHP's default setting for this is empty. -; http://php.net/user-agent -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -; http://php.net/default-socket-timeout -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; http://php.net/auto-detect-line-endings -;auto_detect_line_endings = Off - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; - -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, on Windows: -; -; extension=msql.dll -; -; ... or under UNIX: -; -; extension=msql.so -; -; ... or with a path: -; -; extension=/path/to/extension/msql.so -; -; If you only provide the name of the extension, PHP will look for it in its -; default extension directory. -; -; Windows Extensions -; Note that ODBC support is built in, so no dll is needed for it. -; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) -; extension folders as well as the separate PECL DLL download (PHP 5). -; Be sure to appropriately set the extension_dir directive. -; -;extension=php_bz2.dll -;extension=php_curl.dll -;extension=php_fileinfo.dll -;extension=php_gd2.dll -;extension=php_gettext.dll -;extension=php_gmp.dll -;extension=php_intl.dll -;extension=php_imap.dll -;extension=php_interbase.dll -;extension=php_ldap.dll -;extension=php_mbstring.dll -;extension=php_exif.dll ; Must be after mbstring as it depends on it -;extension=php_mysql.dll -;extension=php_mysqli.dll -;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client -;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client -;extension=php_openssl.dll -;extension=php_pdo_firebird.dll -;extension=php_pdo_mssql.dll -;extension=php_pdo_mysql.dll -;extension=php_pdo_oci.dll -;extension=php_pdo_odbc.dll -;extension=php_pdo_pgsql.dll -;extension=php_pdo_sqlite.dll -;extension=php_pgsql.dll -;extension=php_pspell.dll -;extension=php_shmop.dll - -; The MIBS data available in the PHP distribution must be installed. -; See http://www.php.net/manual/en/snmp.installation.php -;extension=php_snmp.dll - -;extension=php_soap.dll -;extension=php_sockets.dll -;extension=php_sqlite.dll -;extension=php_sqlite3.dll -;extension=php_sybase_ct.dll -;extension=php_tidy.dll -;extension=php_xmlrpc.dll -;extension=php_xsl.dll -;extension=php_zip.dll - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[Date] -; Defines the default timezone used by the date functions -; http://php.net/date.timezone -;date.timezone = - -; http://php.net/date.default-latitude -;date.default_latitude = 31.7667 - -; http://php.net/date.default-longitude -;date.default_longitude = 35.2333 - -; http://php.net/date.sunrise-zenith -;date.sunrise_zenith = 90.583333 - -; http://php.net/date.sunset-zenith -;date.sunset_zenith = 90.583333 - -[filter] -; http://php.net/filter.default -;filter.default = unsafe_raw - -; http://php.net/filter.default-flags -;filter.default_flags = - -[iconv] -;iconv.input_encoding = ISO-8859-1 -;iconv.internal_encoding = ISO-8859-1 -;iconv.output_encoding = ISO-8859-1 - -[intl] -;intl.default_locale = -; This directive allows you to produce PHP errors when some error -; happens within intl functions. The value is the level of the error produced. -; Default is 0, which does not produce any errors. -;intl.error_level = E_WARNING - -[sqlite] -; http://php.net/sqlite.assoc-case -;sqlite.assoc_case = 0 - -[sqlite3] -;sqlite3.extension_dir = - -[Pcre] -;PCRE library backtracking limit. -; http://php.net/pcre.backtrack-limit -;pcre.backtrack_limit=100000 - -;PCRE library recursion limit. -;Please note that if you set this value to a high number you may consume all -;the available process stack and eventually crash PHP (due to reaching the -;stack size limit imposed by the Operating System). -; http://php.net/pcre.recursion-limit -;pcre.recursion_limit=100000 - -[Pdo] -; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" -; http://php.net/pdo-odbc.connection-pooling -;pdo_odbc.connection_pooling=strict - -;pdo_odbc.db2_instance_name - -[Pdo_mysql] -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/pdo_mysql.cache_size -pdo_mysql.cache_size = 2000 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/pdo_mysql.default-socket -pdo_mysql.default_socket= - -[Phar] -; http://php.net/phar.readonly -;phar.readonly = On - -; http://php.net/phar.require-hash -;phar.require_hash = On - -;phar.cache_list = - -[Syslog] -; Whether or not to define the various syslog variables (e.g. $LOG_PID, -; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In -; runtime, you can define these variables by calling define_syslog_variables(). -; http://php.net/define-syslog-variables -define_syslog_variables = Off - -[mail function] -; For Win32 only. -; http://php.net/smtp -SMTP = localhost -; http://php.net/smtp-port -smtp_port = 25 - -; For Win32 only. -; http://php.net/sendmail-from -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -; http://php.net/sendmail-path -;sendmail_path = - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(), even in safe mode. -;mail.force_extra_parameters = - -; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename -mail.add_x_header = On - -; The path to a log file that will log all mail() calls. Log entries include -; the full path of the script, line number, To address and headers. -;mail.log = - -[SQL] -; http://php.net/sql.safe-mode -sql.safe_mode = Off - -[ODBC] -; http://php.net/odbc.default-db -;odbc.default_db = Not yet implemented - -; http://php.net/odbc.default-user -;odbc.default_user = Not yet implemented - -; http://php.net/odbc.default-pw -;odbc.default_pw = Not yet implemented - -; Controls the ODBC cursor model. -; Default: SQL_CURSOR_STATIC (default). -;odbc.default_cursortype - -; Allow or prevent persistent links. -; http://php.net/odbc.allow-persistent -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -; http://php.net/odbc.check-persistent -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/odbc.max-persistent -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/odbc.max-links -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -; http://php.net/odbc.defaultlrl -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of odbc.defaultlrl and odbc.defaultbinmode -; http://php.net/odbc.defaultbinmode -odbc.defaultbinmode = 1 - -;birdstep.max_links = -1 - -[Interbase] -; Allow or prevent persistent links. -ibase.allow_persistent = 1 - -; Maximum number of persistent links. -1 means no limit. -ibase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ibase.max_links = -1 - -; Default database name for ibase_connect(). -;ibase.default_db = - -; Default username for ibase_connect(). -;ibase.default_user = - -; Default password for ibase_connect(). -;ibase.default_password = - -; Default charset for ibase_connect(). -;ibase.default_charset = - -; Default timestamp format. -ibase.timestampformat = "%Y-%m-%d %H:%M:%S" - -; Default date format. -ibase.dateformat = "%Y-%m-%d" - -; Default time format. -ibase.timeformat = "%H:%M:%S" - -[MySQL] -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysql.allow_local_infile -mysql.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysql.allow-persistent -mysql.allow_persistent = On - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysql.cache_size -mysql.cache_size = 2000 - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysql.max-persistent -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/mysql.max-links -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysql.default-port -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysql.default-socket -mysql.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-host -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-user -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysql.default-password -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -; http://php.net/mysql.connect-timeout -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -; http://php.net/mysql.trace-mode -mysql.trace_mode = Off - -[MySQLi] - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysqli.max-persistent -mysqli.max_persistent = -1 - -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysqli.allow_local_infile -;mysqli.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysqli.allow-persistent -mysqli.allow_persistent = On - -; Maximum number of links. -1 means no limit. -; http://php.net/mysqli.max-links -mysqli.max_links = -1 - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysqli.cache_size -mysqli.cache_size = 2000 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysqli.default-port -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysqli.default-socket -mysqli.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-host -mysqli.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-user -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysqli.default-pw -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off - -[mysqlnd] -; Enable / Disable collection of general statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_statistics -mysqlnd.collect_statistics = On - -; Enable / Disable collection of memory usage statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_memory_statistics -mysqlnd.collect_memory_statistics = On - -; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. -; http://php.net/mysqlnd.net_cmd_buffer_size -;mysqlnd.net_cmd_buffer_size = 2048 - -; Size of a pre-allocated buffer used for reading data sent by the server in -; bytes. -; http://php.net/mysqlnd.net_read_buffer_size -;mysqlnd.net_read_buffer_size = 32768 - -[OCI8] - -; Connection: Enables privileged connections using external -; credentials (OCI_SYSOPER, OCI_SYSDBA) -; http://php.net/oci8.privileged-connect -;oci8.privileged_connect = Off - -; Connection: The maximum number of persistent OCI8 connections per -; process. Using -1 means no limit. -; http://php.net/oci8.max-persistent -;oci8.max_persistent = -1 - -; Connection: The maximum number of seconds a process is allowed to -; maintain an idle persistent connection. Using -1 means idle -; persistent connections will be maintained forever. -; http://php.net/oci8.persistent-timeout -;oci8.persistent_timeout = -1 - -; Connection: The number of seconds that must pass before issuing a -; ping during oci_pconnect() to check the connection validity. When -; set to 0, each oci_pconnect() will cause a ping. Using -1 disables -; pings completely. -; http://php.net/oci8.ping-interval -;oci8.ping_interval = 60 - -; Connection: Set this to a user chosen connection class to be used -; for all pooled server requests with Oracle 11g Database Resident -; Connection Pooling (DRCP). To use DRCP, this value should be set to -; the same string for all web servers running the same application, -; the database pool must be configured, and the connection string must -; specify to use a pooled server. -;oci8.connection_class = - -; High Availability: Using On lets PHP receive Fast Application -; Notification (FAN) events generated when a database node fails. The -; database must also be configured to post FAN events. -;oci8.events = Off - -; Tuning: This option enables statement caching, and specifies how -; many statements to cache. Using 0 disables statement caching. -; http://php.net/oci8.statement-cache-size -;oci8.statement_cache_size = 20 - -; Tuning: Enables statement prefetching and sets the default number of -; rows that will be fetched automatically after statement execution. -; http://php.net/oci8.default-prefetch -;oci8.default_prefetch = 100 - -; Compatibility. Using On means oci_close() will not close -; oci_connect() and oci_new_connect() connections. -; http://php.net/oci8.old-oci-close-semantics -;oci8.old_oci_close_semantics = Off - -[PostgreSQL] -; Allow or prevent persistent links. -; http://php.net/pgsql.allow-persistent -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -; http://php.net/pgsql.auto-reset-persistent -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/pgsql.max-persistent -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -; http://php.net/pgsql.max-links -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -; http://php.net/pgsql.ignore-notice -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Notice message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -; http://php.net/pgsql.log-notice -pgsql.log_notice = 0 - -[Sybase-CT] -; Allow or prevent persistent links. -; http://php.net/sybct.allow-persistent -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/sybct.max-persistent -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/sybct.max-links -sybct.max_links = -1 - -; Minimum server message severity to display. -; http://php.net/sybct.min-server-severity -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -; http://php.net/sybct.min-client-severity -sybct.min_client_severity = 10 - -; Set per-context timeout -; http://php.net/sybct.timeout -;sybct.timeout= - -;sybct.packet_size - -; The maximum time in seconds to wait for a connection attempt to succeed before returning failure. -; Default: one minute -;sybct.login_timeout= - -; The name of the host you claim to be connecting from, for display by sp_who. -; Default: none -;sybct.hostname= - -; Allows you to define how often deadlocks are to be retried. -1 means "forever". -; Default: 0 -;sybct.deadlock_retry_count= - -[bcmath] -; Number of decimal digits for all bcmath functions. -; http://php.net/bcmath.scale -bcmath.scale = 0 - -[browscap] -; http://php.net/browscap -;browscap = extra/browscap.ini - -[Session] -; Handler used to store/retrieve data. -; http://php.net/session.save-handler -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -; -; The path can be defined as: -; -; session.save_path = "N;/path" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if you -; or your OS have problems with lots of files in one directory, and is -; a more efficient layout for servers that handle lots of sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -; http://php.net/session.save-path -session.save_path = "/tmp" - -; Whether to use cookies. -; http://php.net/session.use-cookies -session.use_cookies = 1 - -; http://php.net/session.cookie-secure -;session.cookie_secure = - -; This option forces PHP to fetch and use a cookie for storing and maintaining -; the session id. We encourage this operation as it's very helpful in combating -; session hijacking when not specifying and managing your own session id. It is -; not the end all be all of session hijacking defense, but it's a good start. -; http://php.net/session.use-only-cookies -session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -; http://php.net/session.name -session.name = PHPSESSID - -; Initialize session on request startup. -; http://php.net/session.auto-start -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -; http://php.net/session.cookie-lifetime -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -; http://php.net/session.cookie-path -session.cookie_path = / - -; The domain for which the cookie is valid. -; http://php.net/session.cookie-domain -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. -; http://php.net/session.cookie-httponly -session.cookie_httponly = - -; Handler used to serialize data. php is the standard serializer of PHP. -; http://php.net/session.serialize-handler -session.serialize_handler = php - -; Defines the probability that the 'garbage collection' process is started -; on every session initialization. The probability is calculated by using -; gc_probability/gc_divisor. Where session.gc_probability is the numerator -; and gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.gc-probability -session.gc_probability = 1 - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using the following equation: -; gc_probability/gc_divisor. Where session.gc_probability is the numerator and -; session.gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. Increasing this value to 1000 will give you -; a 0.1% chance the gc will run on any give request. For high volume production servers, -; this is a more efficient approach. -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 -; http://php.net/session.gc-divisor -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -; http://php.net/session.gc-maxlifetime -session.gc_maxlifetime = 1440 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script would is the equivalent of -; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; find /path/to/sessions -cmin +24 | xargs rm - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope, even when register_globals -; is disabled. PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. This feature -; introduces some serious security problems if not handled correctly. It's -; recommended that you do not use this feature on production servers. But you -; should enable this on development servers and enable the warning as well. If you -; do not enable the feature on development servers, you won't be warned when it's -; used and debugging errors caused by this can be difficult to track down. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-42 -session.bug_compat_42 = On - -; This setting controls whether or not you are warned by PHP when initializing a -; session value into the global space. session.bug_compat_42 must be enabled before -; these warnings can be issued by PHP. See the directive above for more information. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-warn -session.bug_compat_warn = On - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -; http://php.net/session.referer-check -session.referer_check = - -; How many bytes to read from the file. -; http://php.net/session.entropy-length -session.entropy_length = 0 - -; Specified here to create the session id. -; http://php.net/session.entropy-file -; On systems that don't have /dev/urandom /dev/arandom can be used -; On windows, setting the entropy_length setting will activate the -; Windows random source (using the CryptoAPI) -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -; http://php.net/session.cache-limiter -session.cache_limiter = nocache - -; Document expires after n minutes. -; http://php.net/session.cache-expire -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publicly accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -; http://php.net/session.use-trans-sid -session.use_trans_sid = 0 - -; Select a hash function for use in generating session ids. -; Possible Values -; 0 (MD5 128 bits) -; 1 (SHA-1 160 bits) -; This option may also be set to the name of any hash function supported by -; the hash extension. A list of available hashes is returned by the hash_algos() -; function. -; http://php.net/session.hash-function -session.hash_function = 0 - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; Possible values: -; 4 (4 bits: 0-9, a-f) -; 5 (5 bits: 0-9, a-v) -; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 -; http://php.net/session.hash-bits-per-character -session.hash_bits_per_character = 5 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; http://php.net/url-rewriter.tags -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatibility mode with old versions of PHP 3.0. -mssql.compatability_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. -1 = library default -; msdlib defaults to 25 -; FreeTDS defaults to 4096 -;mssql.max_procs = -1 - -; Specify client character set. -; If empty or not set the client charset from freetds.conf is used -; This is only used when compiled with FreeTDS -;mssql.charset = "ISO-8859-1" - -[Assertion] -; Assert(expr); active by default. -; http://php.net/assert.active -;assert.active = On - -; Issue a PHP warning for each failed assertion. -; http://php.net/assert.warning -;assert.warning = On - -; Don't bail out by default. -; http://php.net/assert.bail -;assert.bail = Off - -; User-function to be called if an assertion fails. -; http://php.net/assert.callback -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -; http://php.net/assert.quiet-eval -;assert.quiet_eval = 0 - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -; http://php.net/com.typelib-file -;com.typelib_file = - -; allow Distributed-COM calls -; http://php.net/com.allow-dcom -;com.allow_dcom = true - -; autoregister constants of a components typlib on com_load() -; http://php.net/com.autoregister-typelib -;com.autoregister_typelib = true - -; register constants casesensitive -; http://php.net/com.autoregister-casesensitive -;com.autoregister_casesensitive = false - -; show warnings on duplicate constant registrations -; http://php.net/com.autoregister-verbose -;com.autoregister_verbose = true - -; The default character set code-page to use when passing strings to and from COM objects. -; Default: system ANSI code page -;com.code_page= - -[mbstring] -; language for internal character representation. -; http://php.net/mbstring.language -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -; http://php.net/mbstring.internal-encoding -;mbstring.internal_encoding = EUC-JP - -; http input encoding. -; http://php.net/mbstring.http-input -;mbstring.http_input = auto - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -; http://php.net/mbstring.http-output -;mbstring.http_output = SJIS - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -; http://php.net/mbstring.encoding-translation -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -; http://php.net/mbstring.detect-order -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -; http://php.net/mbstring.substitute-character -;mbstring.substitute_character = none; - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -; http://php.net/mbstring.func-overload -;mbstring.func_overload = 0 - -; enable strict encoding detection. -;mbstring.strict_detection = Off - -; This directive specifies the regex pattern of content types for which mb_output_handler() -; is activated. -; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) -;mbstring.http_output_conv_mimetype= - -; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte -; Default: "" -;mbstring.script_encoding= - -[gd] -; Tell the jpeg decode to ignore warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -; http://php.net/gd.jpeg-ignore-warning -;gd.jpeg_ignore_warning = 0 - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -; http://php.net/exif.encode-unicode -;exif.encode_unicode = ISO-8859-15 - -; http://php.net/exif.decode-unicode-motorola -;exif.decode_unicode_motorola = UCS-2BE - -; http://php.net/exif.decode-unicode-intel -;exif.decode_unicode_intel = UCS-2LE - -; http://php.net/exif.encode-jis -;exif.encode_jis = - -; http://php.net/exif.decode-jis-motorola -;exif.decode_jis_motorola = JIS - -; http://php.net/exif.decode-jis-intel -;exif.decode_jis_intel = JIS - -[Tidy] -; The path to a default tidy configuration file to use when using tidy -; http://php.net/tidy.default-config -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -; http://php.net/tidy.clean-output -tidy.clean_output = Off - -[soap] -; Enables or disables WSDL caching feature. -; http://php.net/soap.wsdl-cache-enabled -soap.wsdl_cache_enabled=1 - -; Sets the directory name where SOAP extension will put cache files. -; http://php.net/soap.wsdl-cache-dir -soap.wsdl_cache_dir="/tmp" - -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -; http://php.net/soap.wsdl-cache-ttl -soap.wsdl_cache_ttl=86400 - -; Sets the size of the cache limit. (Max. number of WSDL files to cache) -soap.wsdl_cache_limit = 5 - -[sysvshm] -; A default size of the shared memory segment -;sysvshm.init_mem = 10000 - -[ldap] -; Sets the maximum number of open links or -1 for unlimited. -ldap.max_links = -1 - -[mcrypt] -; For more information about mcrypt settings see http://php.net/mcrypt-module-open - -; Directory where to load mcrypt algorithms -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.algorithms_dir= - -; Directory where to load mcrypt modes -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.modes_dir= - -[dba] -;dba.default_handler= - -[xsl] -; Write operations from within XSLT are disabled by default. -; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44 -; Set it to 0 to allow all operations -;xsl.security_prefs = 44 - -; Local Variables: -; tab-width: 4 -; End: diff --git a/php/fpm-php5.3/php-fpm.conf b/php/fpm-php5.3/php-fpm.conf deleted file mode 100644 index 0b0a7f8b..00000000 --- a/php/fpm-php5.3/php-fpm.conf +++ /dev/null @@ -1,311 +0,0 @@ -;;;;;;;;;;;;;;;;;;;;; -; FPM Configuration ; -;;;;;;;;;;;;;;;;;;;;; - -; All relative paths in this configuration file are relative to PHP's install -; prefix (/usr/lib/php5.3). This prefix can be dynamicaly changed by using the -; '-p' argument from the command line. - -; Include one or more files. If glob(3) exists, it is used to include a bunch of -; files from a glob(3) pattern. This directive can be used everywhere in the -; file. -; Relative path can also be used. They will be prefixed by: -; - the global prefix if it's been set (-p arguement) -; - /usr/lib/php5.3 otherwise -;include=/etc/php/fpm-php5.3/fpm.d/*.conf - -;;;;;;;;;;;;;;;;;; -; Global Options ; -;;;;;;;;;;;;;;;;;; - -[global] -; Pid file -; Note: the default prefix is /var/lib -; Default Value: none -; Warning: pid file is overriden by the Gentoo init script. -; FPM will refuse to start if you uncomment this settingi and make use of the -; init script. -; pid = /var/run/php-fpm.pid - -; Error log file -; Note: the default prefix is /var/lib -; Default Value: log/php-fpm.log -error_log = /var/log/php-fpm.log - -; Log level -; Possible Values: alert, error, warning, notice, debug -; Default Value: notice -;log_level = notice - -; If this number of child processes exit with SIGSEGV or SIGBUS within the time -; interval set by emergency_restart_interval then FPM will restart. A value -; of '0' means 'Off'. -; Default Value: 0 -;emergency_restart_threshold = 0 - -; Interval of time used by emergency_restart_interval to determine when -; a graceful restart will be initiated. This can be useful to work around -; accidental corruptions in an accelerator's shared memory. -; Available Units: s(econds), m(inutes), h(ours), or d(ays) -; Default Unit: seconds -; Default Value: 0 -;emergency_restart_interval = 0 - -; Time limit for child processes to wait for a reaction on signals from master. -; Available units: s(econds), m(inutes), h(ours), or d(ays) -; Default Unit: seconds -; Default Value: 0 -;process_control_timeout = 0 - -; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. -; Default Value: yes -;daemonize = yes - -;;;;;;;;;;;;;;;;;;;; -; Pool Definitions ; -;;;;;;;;;;;;;;;;;;;; - -; Multiple pools of child processes may be started with different listening -; ports and different management options. The name of the pool will be -; used in logs and stats. There is no limitation on the number of pools which -; FPM can handle. Your system will tell you anyway :) - -; Start a new pool named 'www'. -; the variable $pool can we used in any directive and will be replaced by the -; pool name ('www' here) -[www] - -; Per pool prefix -; It only applies on the following directives: -; - 'slowlog' -; - 'listen' (unixsocket) -; - 'chroot' -; - 'chdir' -; - 'php_values' -; - 'php_admin_values' -; When not set, the global prefix (or /usr/lib/php5.3) applies instead. -; Note: This directive can also be relative to the global prefix. -; Default Value: none -;prefix = /path/to/pools/$pool - -; The address on which to accept FastCGI requests. -; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on -; a specific port; -; 'port' - to listen on a TCP socket to all addresses on a -; specific port; -; '/path/to/unix/socket' - to listen on a unix socket. -; Note: This value is mandatory. -listen = 127.0.0.1:9000 - -; Set listen(2) backlog. A value of '-1' means unlimited. -; Default Value: 128 (-1 on FreeBSD and OpenBSD) -;listen.backlog = -1 - -; List of ipv4 addresses of FastCGI clients which are allowed to connect. -; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original -; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address -; must be separated by a comma. If this value is left blank, connections will be -; accepted from any ip address. -; Default Value: any -;listen.allowed_clients = 127.0.0.1 - -; Set permissions for unix socket, if one is used. In Linux, read/write -; permissions must be set in order to allow connections from a web server. Many -; BSD-derived systems allow connections regardless of permissions. -; Default Values: user and group are set as the running user -; mode is set to 0666 -;listen.owner = nobody -;listen.group = nobody -;listen.mode = 0666 - -; Unix user/group of processes -; Note: The user is mandatory. If the group is not set, the default user's group -; will be used. -user = nobody -group = nobody - -; Choose how the process manager will control the number of child processes. -; Possible Values: -; static - a fixed number (pm.max_children) of child processes; -; dynamic - the number of child processes are set dynamically based on the -; following directives: -; pm.max_children - the maximum number of children that can -; be alive at the same time. -; pm.start_servers - the number of children created on startup. -; pm.min_spare_servers - the minimum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is less than this -; number then some children will be created. -; pm.max_spare_servers - the maximum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is greater than this -; number then some children will be killed. -; Note: This value is mandatory. -pm = dynamic - -; The number of child processes to be created when pm is set to 'static' and the -; maximum number of child processes to be created when pm is set to 'dynamic'. -; This value sets the limit on the number of simultaneous requests that will be -; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. -; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP -; CGI. -; Note: Used when pm is set to either 'static' or 'dynamic' -; Note: This value is mandatory. -pm.max_children = 50 - -; The number of child processes created on startup. -; Note: Used only when pm is set to 'dynamic' -; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 -;pm.start_servers = 20 - -; The desired minimum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.min_spare_servers = 5 - -; The desired maximum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.max_spare_servers = 35 - -; The number of requests each child process should execute before respawning. -; This can be useful to work around memory leaks in 3rd party libraries. For -; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. -; Default Value: 0 -;pm.max_requests = 500 - -; The URI to view the FPM status page. If this value is not set, no URI will be -; recognized as a status page. By default, the status page shows the following -; information: -; accepted conn - the number of request accepted by the pool; -; pool - the name of the pool; -; process manager - static or dynamic; -; idle processes - the number of idle processes; -; active processes - the number of active processes; -; total processes - the number of idle + active processes. -; max children reached - number of times, the process limit has been reached, -; when pm tries to start more children (works only for -; pm 'dynamic') -; The values of 'idle processes', 'active processes' and 'total processes' are -; updated each second. The value of 'accepted conn' is updated in real time. -; Example output: -; accepted conn: 12073 -; pool: www -; process manager: static -; idle processes: 35 -; active processes: 65 -; total processes: 100 -; max children reached: 1 -; By default the status page output is formatted as text/plain. Passing either -; 'html' or 'json' as a query string will return the corresponding output -; syntax. Example: -; http://www.foo.bar/status -; http://www.foo.bar/status?json -; http://www.foo.bar/status?html -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;pm.status_path = /status - -; The ping URI to call the monitoring page of FPM. If this value is not set, no -; URI will be recognized as a ping page. This could be used to test from outside -; that FPM is alive and responding, or to -; - create a graph of FPM availability (rrd or such); -; - remove a server from a group if it is not responding (load balancing); -; - trigger alerts for the operating team (24/7). -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;ping.path = /ping - -; This directive may be used to customize the response of a ping request. The -; response is formatted as text/plain with a 200 response code. -; Default Value: pong -;ping.response = pong - -; The timeout for serving a single request after which the worker process will -; be killed. This option should be used when the 'max_execution_time' ini option -; does not stop script execution for some reason. A value of '0' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -;request_terminate_timeout = 0 - -; The timeout for serving a single request after which a PHP backtrace will be -; dumped to the 'slowlog' file. A value of '0s' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -;request_slowlog_timeout = 0 - -; The log file for slow requests -; Default Value: not set -; Note: slowlog is mandatory if request_slowlog_timeout is set -;slowlog = /var/log/php-fpm-$pool.log.slow - -; Set open file descriptor rlimit. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Chroot to this directory at the start. This value must be defined as an -; absolute path. When this value is not set, chroot is not used. -; Note: you can prefix with '$prefix' to chroot to the pool prefix or one -; of its subdirectories. If the pool prefix is not set, the global prefix -; will be used instead. -; Note: chrooting is a great security feature and should be used whenever -; possible. However, all PHP paths will be relative to the chroot -; (error_log, sessions.save_path, ...). -; Default Value: not set -;chroot = - -; Chdir to this directory at the start. -; Note: relative path can be used. -; Default Value: current directory or / when chroot -;chdir = /var/www - -; Redirect worker stdout and stderr into main error log. If not set, stdout and -; stderr will be redirected to /dev/null according to FastCGI specs. -; Note: on highloaded environement, this can cause some delay in the page -; process time (several ms). -; Default Value: no -;catch_workers_output = yes - -; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from -; the current environment. -; Default Value: clean env -;env[HOSTNAME] = $HOSTNAME -;env[PATH] = /usr/local/bin:/usr/bin:/bin -;env[TMP] = /tmp -;env[TMPDIR] = /tmp -;env[TEMP] = /tmp - -; Additional php.ini defines, specific to this pool of workers. These settings -; overwrite the values previously defined in the php.ini. The directives are the -; same as the PHP SAPI: -; php_value/php_flag - you can set classic ini defines which can -; be overwritten from PHP call 'ini_set'. -; php_admin_value/php_admin_flag - these directives won't be overwritten by -; PHP call 'ini_set' -; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. - -; Defining 'extension' will load the corresponding shared extension from -; extension_dir. Defining 'disable_functions' or 'disable_classes' will not -; overwrite previously defined php.ini values, but will append the new value -; instead. - -; Note: path INI options can be relative and will be expanded with the prefix -; (pool, global or /usr/lib/php5.3) - -; Default Value: nothing is defined by default except the values in php.ini and -; specified at startup with the -d argument -;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com -;php_flag[display_errors] = off -;php_admin_value[error_log] = /var/log/fpm-php.www.log -;php_admin_flag[log_errors] = on -;php_admin_value[memory_limit] = 32M diff --git a/php/fpm-php5.3/php.ini b/php/fpm-php5.3/php.ini deleted file mode 100644 index 24e78a6c..00000000 --- a/php/fpm-php5.3/php.ini +++ /dev/null @@ -1,1918 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About php.ini ; -;;;;;;;;;;;;;;;;;;; -; PHP's initialization file, generally called php.ini, is responsible for -; configuring many of the aspects of PHP's behavior. - -; PHP attempts to find and load this configuration from a number of locations. -; The following is a summary of its search order: -; 1. SAPI module specific location. -; 2. The PHPRC environment variable. (As of PHP 5.2.0) -; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) -; 4. Current working directory (except CLI) -; 5. The web server's directory (for SAPI modules), or directory of PHP -; (otherwise in Windows) -; 6. The directory from the --with-config-file-path compile time option, or the -; Windows directory (C:\windows or C:\winnt) -; See the PHP docs for more specific information. -; http://php.net/configuration.file - -; The syntax of the file is extremely simple. Whitespace and lines -; beginning with a semicolon are silently ignored (as you probably guessed). -; Section headers (e.g. [Foo]) are also silently ignored, even though -; they might mean something in the future. - -; Directives following the section heading [PATH=/www/mysite] only -; apply to PHP files in the /www/mysite directory. Directives -; following the section heading [HOST=www.example.com] only apply to -; PHP files served from www.example.com. Directives set in these -; special sections cannot be overridden by user-defined INI files or -; at runtime. Currently, [PATH=] and [HOST=] sections only work under -; CGI/FastCGI. -; http://php.net/ini.sections - -; Directives are specified using the following syntax: -; directive = value -; Directive names are *case sensitive* - foo=bar is different from FOO=bar. -; Directives are variables used to configure PHP or PHP extensions. -; There is no name validation. If PHP can't find an expected -; directive because it is not set or is mistyped, a default value will be used. - -; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one -; of the INI constants (On, Off, True, False, Yes, No and None) or an expression -; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a -; previously set variable or directive (e.g. ${foo}) - -; Expressions in the INI file are limited to bitwise operators and parentheses: -; | bitwise OR -; ^ bitwise XOR -; & bitwise AND -; ~ bitwise NOT -; ! boolean NOT - -; Boolean flags can be turned on using the values 1, On, True or Yes. -; They can be turned off using the values 0, Off, False or No. - -; An empty string can be denoted by simply not writing anything after the equal -; sign, or by using the None keyword: - -; foo = ; sets foo to an empty string -; foo = None ; sets foo to an empty string -; foo = "None" ; sets foo to the string 'None' - -; If you use constants in your value, and these constants belong to a -; dynamically loaded extension (either a PHP extension or a Zend extension), -; you may only use these constants *after* the line that loads the extension. - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; PHP comes packaged with two INI files. One that is recommended to be used -; in production environments and one that is recommended to be used in -; development environments. - -; php.ini-production contains settings which hold security, performance and -; best practices at its core. But please be aware, these settings may break -; compatibility with older or less security conscience applications. We -; recommending using the production ini in production and testing environments. - -; php.ini-development is very similar to its production variant, except it's -; much more verbose when it comes to errors. We recommending using the -; development version only in development environments as errors shown to -; application users can inadvertently leak otherwise secure information. - -;;;;;;;;;;;;;;;;;;; -; Quick Reference ; -;;;;;;;;;;;;;;;;;;; -; The following are all the settings which are different in either the production -; or development versions of the INIs with respect to PHP's default behavior. -; Please see the actual settings later in the document for more details as to why -; we recommend these changes in PHP's behavior. - -; allow_call_time_pass_reference -; Default Value: On -; Development Value: Off -; Production Value: Off - -; display_errors -; Default Value: On -; Development Value: On -; Production Value: Off - -; display_startup_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; error_reporting -; Default Value: E_ALL & ~E_NOTICE -; Development Value: E_ALL | E_STRICT -; Production Value: E_ALL & ~E_DEPRECATED - -; html_errors -; Default Value: On -; Development Value: On -; Production value: Off - -; log_errors -; Default Value: Off -; Development Value: On -; Production Value: On - -; magic_quotes_gpc -; Default Value: On -; Development Value: Off -; Production Value: Off - -; max_input_time -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) - -; output_buffering -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 - -; register_argc_argv -; Default Value: On -; Development Value: Off -; Production Value: Off - -; register_long_arrays -; Default Value: On -; Development Value: Off -; Production Value: Off - -; request_order -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" - -; session.bug_compat_42 -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.bug_compat_warn -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.gc_divisor -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 - -; session.hash_bits_per_character -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 - -; short_open_tag -; Default Value: On -; Development Value: Off -; Production Value: Off - -; track_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; url_rewriter.tags -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" - -; variables_order -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS" - -;;;;;;;;;;;;;;;;;;;; -; php.ini Options ; -;;;;;;;;;;;;;;;;;;;; -; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" -;user_ini.filename = ".user.ini" - -; To disable this feature set this option to empty value -;user_ini.filename = - -; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) -;user_ini.cache_ttl = 300 - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -; http://php.net/engine -engine = On - -; This directive determines whether or not PHP will recognize code between -; tags as PHP source which should be processed as such. It's been -; recommended for several years that you not use the short tag "short cut" and -; instead to use the full tag combination. With the wide spread use -; of XML and use of these tags by other languages, the server can become easily -; confused and end up parsing the wrong code in the wrong context. But because -; this short cut has been a feature for such a long time, it's currently still -; supported for backwards compatibility, but we recommend you don't use them. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/short-open-tag -short_open_tag = Off - -; Allow ASP-style <% %> tags. -; http://php.net/asp-tags -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -; http://php.net/precision -precision = 14 - -; Enforce year 2000 compliance (will cause problems with non-compliant browsers) -; http://php.net/y2k-compliance -y2k_compliance = On - -; Output buffering is a mechanism for controlling how much output data -; (excluding headers and cookies) PHP should keep internally before pushing that -; data to the client. If your application's output exceeds this setting, PHP -; will send that data in chunks of roughly the size you specify. -; Turning on this setting and managing its maximum buffer size can yield some -; interesting side-effects depending on your application and web server. -; You may be able to send headers and cookies after you've already sent output -; through print or echo. You also may see performance benefits if your server is -; emitting less packets due to buffered output versus PHP streaming the output -; as it gets it. On production servers, 4096 bytes is a good setting for performance -; reasons. -; Note: Output buffering can also be controlled via Output Buffering Control -; functions. -; Possible Values: -; On = Enabled and buffer is unlimited. (Use with caution) -; Off = Disabled -; Integer = Enables the buffer and sets its maximum size in bytes. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 -; http://php.net/output-buffering -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -; http://php.net/output-handler -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few hundreds bytes each as a result of -; compression. If you prefer a larger chunk size for better -; performance, enable output_buffering in addition. -; Note: You need to use zlib.output_handler instead of the standard -; output_handler, or otherwise the output will be corrupted. -; http://php.net/zlib.output-compression -zlib.output_compression = Off - -; http://php.net/zlib.output-compression-level -;zlib.output_compression_level = -1 - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -; http://php.net/zlib.output-handler -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -; http://php.net/implicit-flush -; Note: This directive is hardcoded to On for the CLI SAPI -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instantiated. A warning appears if the specified function is -; not defined, or if the function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func = - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 17 - -; This directive allows you to enable and disable warnings which PHP will issue -; if you pass a value by reference at function call time. Passing values by -; reference at function call time is a deprecated feature which will be removed -; from PHP at some point in the near future. The acceptable method for passing a -; value by reference to a function is by declaring the reference in the functions -; definition, not at call time. This directive does not disable this feature, it -; only determines whether PHP will warn you about it or not. These warnings -; should enabled in development environments only. -; Default Value: On (Suppress warnings) -; Development Value: Off (Issue warnings) -; Production Value: Off (Issue warnings) -; http://php.net/allow-call-time-pass-reference -allow_call_time_pass_reference = Off - -; Safe Mode -; http://php.net/safe-mode -safe_mode = Off - -; By default, Safe Mode does a UID compare check when -; opening files. If you want to relax this to a GID compare, -; then turn on safe_mode_gid. -; http://php.net/safe-mode-gid -safe_mode_gid = Off - -; When safe_mode is on, UID/GID checks are bypassed when -; including files from this directory and its subdirectories. -; (directory must also be in include_path or full path must -; be used when including) -; http://php.net/safe-mode-include-dir -safe_mode_include_dir = - -; When safe_mode is on, only executables located in the safe_mode_exec_dir -; will be allowed to be executed via the exec family of functions. -; http://php.net/safe-mode-exec-dir -safe_mode_exec_dir = - -; Setting certain environment variables may be a potential security breach. -; This directive contains a comma-delimited list of prefixes. In Safe Mode, -; the user may only alter environment variables whose names begin with the -; prefixes supplied here. By default, users will only be able to set -; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). -; Note: If this directive is empty, PHP will let the user modify ANY -; environment variable! -; http://php.net/safe-mode-allowed-env-vars -safe_mode_allowed_env_vars = PHP_ - -; This directive contains a comma-delimited list of environment variables that -; the end user won't be able to change using putenv(). These variables will be -; protected even if safe_mode_allowed_env_vars is set to allow to change them. -; http://php.net/safe-mode-protected-env-vars -safe_mode_protected_env_vars = LD_LIBRARY_PATH - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/open-basedir -;open_basedir = - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-functions -disable_functions = - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-classes -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; would work. -; http://php.net/syntax-highlighting -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.bg = #FFFFFF -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long requests, which may end up -; being interrupted by the user or a browser timing out. PHP's default behavior -; is to disable this feature. -; http://php.net/ignore-user-abort -;ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; http://php.net/realpath-cache-size -;realpath_cache_size = 16k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; http://php.net/realpath-cache-ttl -;realpath_cache_ttl = 120 - -; Enables or disables the circular reference collector. -; http://php.net/zend.enable-gc -zend.enable_gc = On - -;;;;;;;;;;;;;;;;; -; Miscellaneous ; -;;;;;;;;;;;;;;;;; - -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -; http://php.net/expose-php -expose_php = On - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -; Maximum execution time of each script, in seconds -; http://php.net/max-execution-time -; Note: This directive is hardcoded to 0 for the CLI SAPI -max_execution_time = 30 - -; Maximum amount of time each script may spend parsing request data. It's a good -; idea to limit this time on productions servers in order to eliminate unexpectedly -; long running scripts. -; Note: This directive is hardcoded to -1 for the CLI SAPI -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) -; http://php.net/max-input-time -max_input_time = 60 - -; Maximum input variable nesting level -; http://php.net/max-input-nesting-level -;max_input_nesting_level = 64 - -; How many GET/POST/COOKIE input variables may be accepted -; max_input_vars = 1000 - -; Maximum amount of memory a script may consume (128MB) -; http://php.net/memory-limit -memory_limit = 128M - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; This directive informs PHP of which errors, warnings and notices you would like -; it to take action for. The recommended way of setting values for this -; directive is through the use of the error level constants and bitwise -; operators. The error level constants are below here for convenience as well as -; some common settings and their meanings. -; By default, PHP is set to take action on all errors, notices and warnings EXCEPT -; those related to E_NOTICE and E_STRICT, which together cover best practices and -; recommended coding standards in PHP. For performance reasons, this is the -; recommend error reporting setting. Your production server shouldn't be wasting -; resources complaining about best practices and coding standards. That's what -; development servers and development settings are for. -; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This -; means it pretty much reports everything which is exactly what you want during -; development and early testing. -; -; Error Level Constants: -; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; E_DEPRECATED - warn about code that will not work in future versions -; of PHP -; E_USER_DEPRECATED - user-generated deprecation warnings -; -; Common Values: -; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.) -; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices) -; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) -; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.) -; Default Value: E_ALL & ~E_NOTICE -; Development Value: E_ALL | E_STRICT -; Production Value: E_ALL & ~E_DEPRECATED -; http://php.net/error-reporting -error_reporting = E_ALL | E_STRICT - -; This directive controls whether or not and where PHP will output errors, -; notices and warnings too. Error output is very useful during development, but -; it could be very dangerous in production environments. Depending on the code -; which is triggering the error, sensitive information could potentially leak -; out of your application such as database usernames and passwords or worse. -; It's recommended that errors be logged on production servers rather than -; having the errors sent to STDOUT. -; Possible Values: -; Off = Do not display any errors -; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout = Display errors to STDOUT -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/display-errors -display_errors = On - -; The display of errors which occur during PHP's startup sequence are handled -; separately from display_errors. PHP's default behavior is to suppress those -; errors from clients. Turning the display of startup errors on can be useful in -; debugging configuration problems. But, it's strongly recommended that you -; leave this setting off on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/display-startup-errors -display_startup_errors = On - -; Besides displaying errors, PHP can also log errors to locations such as a -; server-specific log, STDERR, or a location specified by the error_log -; directive found below. While errors should not be displayed on productions -; servers they should still be monitored and logging is a great way to do that. -; Default Value: Off -; Development Value: On -; Production Value: On -; http://php.net/log-errors -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -; http://php.net/log-errors-max-len -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line unless ignore_repeated_source is set true. -; http://php.net/ignore-repeated-errors -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -; http://php.net/ignore-repeated-source -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -; http://php.net/report-memleaks -report_memleaks = On - -; This setting is on by default. -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). Setting this value -; to On can assist in debugging and is appropriate for development servers. It should -; however be disabled on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/track-errors -track_errors = On - -; Turn off normal error reporting and emit XML-RPC error XML -; http://php.net/xmlrpc-errors -;xmlrpc_errors = 0 - -; An XML-RPC faultCode -;xmlrpc_error_number = 0 - -; When PHP displays or logs an error, it has the capability of inserting html -; links to documentation related to that error. This directive controls whether -; those HTML links appear in error messages or not. For performance and security -; reasons, it's recommended you disable this on production servers. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: On -; Development Value: On -; Production value: Off -; http://php.net/html-errors -html_errors = On - -; If html_errors is set On PHP produces clickable error messages that direct -; to a page describing the error or function causing the error in detail. -; You can download a copy of the PHP manual from http://php.net/docs -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. PHP's default behavior is to leave these settings empty. -; Note: Never use this feature for production boxes. -; http://php.net/docref-root -; Examples -;docref_root = "/phpmanual/" - -; http://php.net/docref-ext -;docref_ext = .html - -; String to output before an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-prepend-string -; Example: -;error_prepend_string = "" - -; String to output after an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-append-string -; Example: -;error_append_string = "" - -; Log errors to specified file. PHP's default behavior is to leave this value -; empty. -; http://php.net/error-log -; Example: -;error_log = php_errors.log -; Log errors to syslog (Event Log on NT, not valid in Windows 95). -;error_log = syslog - -;windows.show_crt_warning -; Default value: 0 -; Development value: 0 -; Production value: 0 - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; - -; The separator used in PHP generated URLs to separate arguments. -; PHP's default setting is "&". -; http://php.net/arg-separator.output -; Example: -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; PHP's default setting is "&". -; NOTE: Every character in this directive is considered as separator! -; http://php.net/arg-separator.input -; Example: -;arg_separator.input = ";&" - -; This directive determines which super global arrays are registered when PHP -; starts up. If the register_globals directive is enabled, it also determines -; what order variables are populated into the global space. G,P,C,E & S are -; abbreviations for the following respective super globals: GET, POST, COOKIE, -; ENV and SERVER. There is a performance penalty paid for the registration of -; these arrays and because ENV is not as commonly used as the others, ENV is -; is not recommended on productions servers. You can still get access to -; the environment variables through getenv() should you need to. -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS"; -; http://php.net/variables-order -variables_order = "GPCS" - -; This directive determines which super global data (G,P,C,E & S) should -; be registered into the super global array REQUEST. If so, it also determines -; the order in which that data is registered. The values for this directive are -; specified in the same manner as the variables_order directive, EXCEPT one. -; Leaving this value empty will cause PHP to use the value set in the -; variables_order directive. It does not mean it will leave the super globals -; array REQUEST empty. -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" -; http://php.net/request-order -request_order = "GP" - -; Whether or not to register the EGPCS variables as global variables. You may -; want to turn this off if you don't want to clutter your scripts' global scope -; with user data. -; You should do your best to write your scripts so that they do not require -; register_globals to be on; Using form variables as globals can easily lead -; to possible security problems, if the code is not very well thought of. -; http://php.net/register-globals -register_globals = Off - -; Determines whether the deprecated long $HTTP_*_VARS type predefined variables -; are registered by PHP or not. As they are deprecated, we obviously don't -; recommend you use them. They are on by default for compatibility reasons but -; they are not recommended on production servers. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-long-arrays -register_long_arrays = Off - -; This directive determines whether PHP registers $argv & $argc each time it -; runs. $argv contains an array of all the arguments passed to PHP when a script -; is invoked. $argc contains an integer representing the number of arguments -; that were passed when the script was invoked. These arrays are extremely -; useful when running scripts from the command line. When this directive is -; enabled, registering these variables consumes CPU cycles and memory each time -; a script is executed. For performance reasons, this feature should be disabled -; on production servers. -; Note: This directive is hardcoded to On for the CLI SAPI -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-argc-argv -register_argc_argv = Off - -; When enabled, the SERVER and ENV variables are created when they're first -; used (Just In Time) instead of when the script starts. If these variables -; are not used within a script, having this directive on will result in a -; performance gain. The PHP directives register_globals, register_long_arrays, -; and register_argc_argv must be disabled for this directive to have any affect. -; http://php.net/auto-globals-jit -auto_globals_jit = On - -; Maximum size of POST data that PHP will accept. -; http://php.net/post-max-size -post_max_size = 8M - -; Magic quotes are a preprocessing feature of PHP where PHP will attempt to -; escape any character sequences in GET, POST, COOKIE and ENV data which might -; otherwise corrupt data being placed in resources such as databases before -; making that data available to you. Because of character encoding issues and -; non-standard SQL implementations across many databases, it's not currently -; possible for this feature to be 100% accurate. PHP's default behavior is to -; enable the feature. We strongly recommend you use the escaping mechanisms -; designed specifically for the database your using instead of relying on this -; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is -; removed in PHP 5.4. -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/magic-quotes-gpc -magic_quotes_gpc = Off - -; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. -; http://php.net/magic-quotes-runtime -magic_quotes_runtime = Off - -; Use Sybase-style magic quotes (escape ' with '' instead of \'). -; http://php.net/magic-quotes-sybase -magic_quotes_sybase = Off - -; Automatically add files before PHP document. -; http://php.net/auto-prepend-file -auto_prepend_file = - -; Automatically add files after PHP document. -; http://php.net/auto-append-file -auto_append_file = - -; By default, PHP will output a character encoding using -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -; http://php.net/default-mimetype -default_mimetype = "text/html" - -; PHP's default character set is set to empty. -; http://php.net/default-charset -;default_charset = "iso-8859-1" - -; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is -; to disable this feature. -; http://php.net/always-populate-raw-post-data -;always_populate_raw_post_data = On - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -include_path = ".:/usr/share/php5:/usr/share/php" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" -; -; PHP's default setting for include_path is ".;/path/to/php/pear" -; http://php.net/include-path - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -; http://php.net/doc-root -doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -; http://php.net/user-dir -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; http://php.net/extension-dir -; extension_dir = "./" -; On windows: -; extension_dir = "ext" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -; http://php.net/enable-dl -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; http://php.net/cgi.force-redirect -;cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. PHP's default behavior is to disable this feature. -;cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; http://php.net/cgi.redirect-status-env -;cgi.redirect_status_env = - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; http://php.net/cgi.fix-pathinfo -;cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; http://php.net/fastcgi.impersonate -;fastcgi.impersonate = 1 - -; Disable logging through FastCGI connection. PHP's default behavior is to enable -; this feature. -;fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -; http://php.net/cgi.rfc2616-headers -;cgi.rfc2616_headers = 0 - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -; http://php.net/file-uploads -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -; http://php.net/upload-tmp-dir -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -; http://php.net/upload-max-filesize -upload_max_filesize = 2M - -; Maximum number of files that can be uploaded via a single request -max_file_uploads = 20 - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-fopen -allow_url_fopen = On - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-include -allow_url_include = Off - -; Define the anonymous ftp password (your email address). PHP's default setting -; for this is empty. -; http://php.net/from -;from="john@doe.com" - -; Define the User-Agent string. PHP's default setting for this is empty. -; http://php.net/user-agent -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -; http://php.net/default-socket-timeout -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; http://php.net/auto-detect-line-endings -;auto_detect_line_endings = Off - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; - -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, on Windows: -; -; extension=msql.dll -; -; ... or under UNIX: -; -; extension=msql.so -; -; ... or with a path: -; -; extension=/path/to/extension/msql.so -; -; If you only provide the name of the extension, PHP will look for it in its -; default extension directory. -; -; Windows Extensions -; Note that ODBC support is built in, so no dll is needed for it. -; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) -; extension folders as well as the separate PECL DLL download (PHP 5). -; Be sure to appropriately set the extension_dir directive. -; -;extension=php_bz2.dll -;extension=php_curl.dll -;extension=php_fileinfo.dll -;extension=php_gd2.dll -;extension=php_gettext.dll -;extension=php_gmp.dll -;extension=php_intl.dll -;extension=php_imap.dll -;extension=php_interbase.dll -;extension=php_ldap.dll -;extension=php_mbstring.dll -;extension=php_exif.dll ; Must be after mbstring as it depends on it -;extension=php_mysql.dll -;extension=php_mysqli.dll -;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client -;extension=php_oci8_11g.dll ; Use with Oracle 11gR2 Instant Client -;extension=php_openssl.dll -;extension=php_pdo_firebird.dll -;extension=php_pdo_mssql.dll -;extension=php_pdo_mysql.dll -;extension=php_pdo_oci.dll -;extension=php_pdo_odbc.dll -;extension=php_pdo_pgsql.dll -;extension=php_pdo_sqlite.dll -;extension=php_pgsql.dll -;extension=php_pspell.dll -;extension=php_shmop.dll - -; The MIBS data available in the PHP distribution must be installed. -; See http://www.php.net/manual/en/snmp.installation.php -;extension=php_snmp.dll - -;extension=php_soap.dll -;extension=php_sockets.dll -;extension=php_sqlite.dll -;extension=php_sqlite3.dll -;extension=php_sybase_ct.dll -;extension=php_tidy.dll -;extension=php_xmlrpc.dll -;extension=php_xsl.dll -;extension=php_zip.dll - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[Date] -; Defines the default timezone used by the date functions -; http://php.net/date.timezone -;date.timezone = - -; http://php.net/date.default-latitude -;date.default_latitude = 31.7667 - -; http://php.net/date.default-longitude -;date.default_longitude = 35.2333 - -; http://php.net/date.sunrise-zenith -;date.sunrise_zenith = 90.583333 - -; http://php.net/date.sunset-zenith -;date.sunset_zenith = 90.583333 - -[filter] -; http://php.net/filter.default -;filter.default = unsafe_raw - -; http://php.net/filter.default-flags -;filter.default_flags = - -[iconv] -;iconv.input_encoding = ISO-8859-1 -;iconv.internal_encoding = ISO-8859-1 -;iconv.output_encoding = ISO-8859-1 - -[intl] -;intl.default_locale = -; This directive allows you to produce PHP errors when some error -; happens within intl functions. The value is the level of the error produced. -; Default is 0, which does not produce any errors. -;intl.error_level = E_WARNING - -[sqlite] -; http://php.net/sqlite.assoc-case -;sqlite.assoc_case = 0 - -[sqlite3] -;sqlite3.extension_dir = - -[Pcre] -;PCRE library backtracking limit. -; http://php.net/pcre.backtrack-limit -;pcre.backtrack_limit=100000 - -;PCRE library recursion limit. -;Please note that if you set this value to a high number you may consume all -;the available process stack and eventually crash PHP (due to reaching the -;stack size limit imposed by the Operating System). -; http://php.net/pcre.recursion-limit -;pcre.recursion_limit=100000 - -[Pdo] -; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" -; http://php.net/pdo-odbc.connection-pooling -;pdo_odbc.connection_pooling=strict - -;pdo_odbc.db2_instance_name - -[Pdo_mysql] -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/pdo_mysql.cache_size -pdo_mysql.cache_size = 2000 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/pdo_mysql.default-socket -pdo_mysql.default_socket= - -[Phar] -; http://php.net/phar.readonly -;phar.readonly = On - -; http://php.net/phar.require-hash -;phar.require_hash = On - -;phar.cache_list = - -[Syslog] -; Whether or not to define the various syslog variables (e.g. $LOG_PID, -; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In -; runtime, you can define these variables by calling define_syslog_variables(). -; http://php.net/define-syslog-variables -define_syslog_variables = Off - -[mail function] -; For Win32 only. -; http://php.net/smtp -SMTP = localhost -; http://php.net/smtp-port -smtp_port = 25 - -; For Win32 only. -; http://php.net/sendmail-from -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -; http://php.net/sendmail-path -;sendmail_path = - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(), even in safe mode. -;mail.force_extra_parameters = - -; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename -mail.add_x_header = On - -; The path to a log file that will log all mail() calls. Log entries include -; the full path of the script, line number, To address and headers. -;mail.log = - -[SQL] -; http://php.net/sql.safe-mode -sql.safe_mode = Off - -[ODBC] -; http://php.net/odbc.default-db -;odbc.default_db = Not yet implemented - -; http://php.net/odbc.default-user -;odbc.default_user = Not yet implemented - -; http://php.net/odbc.default-pw -;odbc.default_pw = Not yet implemented - -; Controls the ODBC cursor model. -; Default: SQL_CURSOR_STATIC (default). -;odbc.default_cursortype - -; Allow or prevent persistent links. -; http://php.net/odbc.allow-persistent -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -; http://php.net/odbc.check-persistent -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/odbc.max-persistent -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/odbc.max-links -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -; http://php.net/odbc.defaultlrl -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of odbc.defaultlrl and odbc.defaultbinmode -; http://php.net/odbc.defaultbinmode -odbc.defaultbinmode = 1 - -;birdstep.max_links = -1 - -[Interbase] -; Allow or prevent persistent links. -ibase.allow_persistent = 1 - -; Maximum number of persistent links. -1 means no limit. -ibase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ibase.max_links = -1 - -; Default database name for ibase_connect(). -;ibase.default_db = - -; Default username for ibase_connect(). -;ibase.default_user = - -; Default password for ibase_connect(). -;ibase.default_password = - -; Default charset for ibase_connect(). -;ibase.default_charset = - -; Default timestamp format. -ibase.timestampformat = "%Y-%m-%d %H:%M:%S" - -; Default date format. -ibase.dateformat = "%Y-%m-%d" - -; Default time format. -ibase.timeformat = "%H:%M:%S" - -[MySQL] -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysql.allow_local_infile -mysql.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysql.allow-persistent -mysql.allow_persistent = On - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysql.cache_size -mysql.cache_size = 2000 - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysql.max-persistent -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/mysql.max-links -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysql.default-port -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysql.default-socket -mysql.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-host -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-user -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysql.default-password -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -; http://php.net/mysql.connect-timeout -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -; http://php.net/mysql.trace-mode -mysql.trace_mode = Off - -[MySQLi] - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysqli.max-persistent -mysqli.max_persistent = -1 - -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysqli.allow_local_infile -;mysqli.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysqli.allow-persistent -mysqli.allow_persistent = On - -; Maximum number of links. -1 means no limit. -; http://php.net/mysqli.max-links -mysqli.max_links = -1 - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysqli.cache_size -mysqli.cache_size = 2000 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysqli.default-port -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysqli.default-socket -mysqli.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-host -mysqli.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-user -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysqli.default-pw -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off - -[mysqlnd] -; Enable / Disable collection of general statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_statistics -mysqlnd.collect_statistics = On - -; Enable / Disable collection of memory usage statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_memory_statistics -mysqlnd.collect_memory_statistics = On - -; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. -; http://php.net/mysqlnd.net_cmd_buffer_size -;mysqlnd.net_cmd_buffer_size = 2048 - -; Size of a pre-allocated buffer used for reading data sent by the server in -; bytes. -; http://php.net/mysqlnd.net_read_buffer_size -;mysqlnd.net_read_buffer_size = 32768 - -[OCI8] - -; Connection: Enables privileged connections using external -; credentials (OCI_SYSOPER, OCI_SYSDBA) -; http://php.net/oci8.privileged-connect -;oci8.privileged_connect = Off - -; Connection: The maximum number of persistent OCI8 connections per -; process. Using -1 means no limit. -; http://php.net/oci8.max-persistent -;oci8.max_persistent = -1 - -; Connection: The maximum number of seconds a process is allowed to -; maintain an idle persistent connection. Using -1 means idle -; persistent connections will be maintained forever. -; http://php.net/oci8.persistent-timeout -;oci8.persistent_timeout = -1 - -; Connection: The number of seconds that must pass before issuing a -; ping during oci_pconnect() to check the connection validity. When -; set to 0, each oci_pconnect() will cause a ping. Using -1 disables -; pings completely. -; http://php.net/oci8.ping-interval -;oci8.ping_interval = 60 - -; Connection: Set this to a user chosen connection class to be used -; for all pooled server requests with Oracle 11g Database Resident -; Connection Pooling (DRCP). To use DRCP, this value should be set to -; the same string for all web servers running the same application, -; the database pool must be configured, and the connection string must -; specify to use a pooled server. -;oci8.connection_class = - -; High Availability: Using On lets PHP receive Fast Application -; Notification (FAN) events generated when a database node fails. The -; database must also be configured to post FAN events. -;oci8.events = Off - -; Tuning: This option enables statement caching, and specifies how -; many statements to cache. Using 0 disables statement caching. -; http://php.net/oci8.statement-cache-size -;oci8.statement_cache_size = 20 - -; Tuning: Enables statement prefetching and sets the default number of -; rows that will be fetched automatically after statement execution. -; http://php.net/oci8.default-prefetch -;oci8.default_prefetch = 100 - -; Compatibility. Using On means oci_close() will not close -; oci_connect() and oci_new_connect() connections. -; http://php.net/oci8.old-oci-close-semantics -;oci8.old_oci_close_semantics = Off - -[PostgreSQL] -; Allow or prevent persistent links. -; http://php.net/pgsql.allow-persistent -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -; http://php.net/pgsql.auto-reset-persistent -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/pgsql.max-persistent -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -; http://php.net/pgsql.max-links -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -; http://php.net/pgsql.ignore-notice -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Notice message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -; http://php.net/pgsql.log-notice -pgsql.log_notice = 0 - -[Sybase-CT] -; Allow or prevent persistent links. -; http://php.net/sybct.allow-persistent -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/sybct.max-persistent -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/sybct.max-links -sybct.max_links = -1 - -; Minimum server message severity to display. -; http://php.net/sybct.min-server-severity -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -; http://php.net/sybct.min-client-severity -sybct.min_client_severity = 10 - -; Set per-context timeout -; http://php.net/sybct.timeout -;sybct.timeout= - -;sybct.packet_size - -; The maximum time in seconds to wait for a connection attempt to succeed before returning failure. -; Default: one minute -;sybct.login_timeout= - -; The name of the host you claim to be connecting from, for display by sp_who. -; Default: none -;sybct.hostname= - -; Allows you to define how often deadlocks are to be retried. -1 means "forever". -; Default: 0 -;sybct.deadlock_retry_count= - -[bcmath] -; Number of decimal digits for all bcmath functions. -; http://php.net/bcmath.scale -bcmath.scale = 0 - -[browscap] -; http://php.net/browscap -;browscap = extra/browscap.ini - -[Session] -; Handler used to store/retrieve data. -; http://php.net/session.save-handler -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -; -; The path can be defined as: -; -; session.save_path = "N;/path" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if you -; or your OS have problems with lots of files in one directory, and is -; a more efficient layout for servers that handle lots of sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -; http://php.net/session.save-path -session.save_path = "/tmp" - -; Whether to use cookies. -; http://php.net/session.use-cookies -session.use_cookies = 1 - -; http://php.net/session.cookie-secure -;session.cookie_secure = - -; This option forces PHP to fetch and use a cookie for storing and maintaining -; the session id. We encourage this operation as it's very helpful in combating -; session hijacking when not specifying and managing your own session id. It is -; not the end all be all of session hijacking defense, but it's a good start. -; http://php.net/session.use-only-cookies -session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -; http://php.net/session.name -session.name = PHPSESSID - -; Initialize session on request startup. -; http://php.net/session.auto-start -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -; http://php.net/session.cookie-lifetime -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -; http://php.net/session.cookie-path -session.cookie_path = / - -; The domain for which the cookie is valid. -; http://php.net/session.cookie-domain -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. -; http://php.net/session.cookie-httponly -session.cookie_httponly = - -; Handler used to serialize data. php is the standard serializer of PHP. -; http://php.net/session.serialize-handler -session.serialize_handler = php - -; Defines the probability that the 'garbage collection' process is started -; on every session initialization. The probability is calculated by using -; gc_probability/gc_divisor. Where session.gc_probability is the numerator -; and gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.gc-probability -session.gc_probability = 1 - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using the following equation: -; gc_probability/gc_divisor. Where session.gc_probability is the numerator and -; session.gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. Increasing this value to 1000 will give you -; a 0.1% chance the gc will run on any give request. For high volume production servers, -; this is a more efficient approach. -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 -; http://php.net/session.gc-divisor -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -; http://php.net/session.gc-maxlifetime -session.gc_maxlifetime = 1440 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script would is the equivalent of -; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; find /path/to/sessions -cmin +24 | xargs rm - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope, even when register_globals -; is disabled. PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. This feature -; introduces some serious security problems if not handled correctly. It's -; recommended that you do not use this feature on production servers. But you -; should enable this on development servers and enable the warning as well. If you -; do not enable the feature on development servers, you won't be warned when it's -; used and debugging errors caused by this can be difficult to track down. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-42 -session.bug_compat_42 = On - -; This setting controls whether or not you are warned by PHP when initializing a -; session value into the global space. session.bug_compat_42 must be enabled before -; these warnings can be issued by PHP. See the directive above for more information. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-warn -session.bug_compat_warn = On - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -; http://php.net/session.referer-check -session.referer_check = - -; How many bytes to read from the file. -; http://php.net/session.entropy-length -session.entropy_length = 0 - -; Specified here to create the session id. -; http://php.net/session.entropy-file -; On systems that don't have /dev/urandom /dev/arandom can be used -; On windows, setting the entropy_length setting will activate the -; Windows random source (using the CryptoAPI) -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -; http://php.net/session.cache-limiter -session.cache_limiter = nocache - -; Document expires after n minutes. -; http://php.net/session.cache-expire -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publicly accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -; http://php.net/session.use-trans-sid -session.use_trans_sid = 0 - -; Select a hash function for use in generating session ids. -; Possible Values -; 0 (MD5 128 bits) -; 1 (SHA-1 160 bits) -; This option may also be set to the name of any hash function supported by -; the hash extension. A list of available hashes is returned by the hash_algos() -; function. -; http://php.net/session.hash-function -session.hash_function = 0 - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; Possible values: -; 4 (4 bits: 0-9, a-f) -; 5 (5 bits: 0-9, a-v) -; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 -; http://php.net/session.hash-bits-per-character -session.hash_bits_per_character = 5 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; http://php.net/url-rewriter.tags -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatibility mode with old versions of PHP 3.0. -mssql.compatability_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. -1 = library default -; msdlib defaults to 25 -; FreeTDS defaults to 4096 -;mssql.max_procs = -1 - -; Specify client character set. -; If empty or not set the client charset from freetds.conf is used -; This is only used when compiled with FreeTDS -;mssql.charset = "ISO-8859-1" - -[Assertion] -; Assert(expr); active by default. -; http://php.net/assert.active -;assert.active = On - -; Issue a PHP warning for each failed assertion. -; http://php.net/assert.warning -;assert.warning = On - -; Don't bail out by default. -; http://php.net/assert.bail -;assert.bail = Off - -; User-function to be called if an assertion fails. -; http://php.net/assert.callback -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -; http://php.net/assert.quiet-eval -;assert.quiet_eval = 0 - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -; http://php.net/com.typelib-file -;com.typelib_file = - -; allow Distributed-COM calls -; http://php.net/com.allow-dcom -;com.allow_dcom = true - -; autoregister constants of a components typlib on com_load() -; http://php.net/com.autoregister-typelib -;com.autoregister_typelib = true - -; register constants casesensitive -; http://php.net/com.autoregister-casesensitive -;com.autoregister_casesensitive = false - -; show warnings on duplicate constant registrations -; http://php.net/com.autoregister-verbose -;com.autoregister_verbose = true - -; The default character set code-page to use when passing strings to and from COM objects. -; Default: system ANSI code page -;com.code_page= - -[mbstring] -; language for internal character representation. -; http://php.net/mbstring.language -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -; http://php.net/mbstring.internal-encoding -;mbstring.internal_encoding = EUC-JP - -; http input encoding. -; http://php.net/mbstring.http-input -;mbstring.http_input = auto - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -; http://php.net/mbstring.http-output -;mbstring.http_output = SJIS - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -; http://php.net/mbstring.encoding-translation -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -; http://php.net/mbstring.detect-order -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -; http://php.net/mbstring.substitute-character -;mbstring.substitute_character = none; - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -; http://php.net/mbstring.func-overload -;mbstring.func_overload = 0 - -; enable strict encoding detection. -;mbstring.strict_detection = Off - -; This directive specifies the regex pattern of content types for which mb_output_handler() -; is activated. -; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) -;mbstring.http_output_conv_mimetype= - -; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte -; Default: "" -;mbstring.script_encoding= - -[gd] -; Tell the jpeg decode to ignore warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -; http://php.net/gd.jpeg-ignore-warning -;gd.jpeg_ignore_warning = 0 - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -; http://php.net/exif.encode-unicode -;exif.encode_unicode = ISO-8859-15 - -; http://php.net/exif.decode-unicode-motorola -;exif.decode_unicode_motorola = UCS-2BE - -; http://php.net/exif.decode-unicode-intel -;exif.decode_unicode_intel = UCS-2LE - -; http://php.net/exif.encode-jis -;exif.encode_jis = - -; http://php.net/exif.decode-jis-motorola -;exif.decode_jis_motorola = JIS - -; http://php.net/exif.decode-jis-intel -;exif.decode_jis_intel = JIS - -[Tidy] -; The path to a default tidy configuration file to use when using tidy -; http://php.net/tidy.default-config -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -; http://php.net/tidy.clean-output -tidy.clean_output = Off - -[soap] -; Enables or disables WSDL caching feature. -; http://php.net/soap.wsdl-cache-enabled -soap.wsdl_cache_enabled=1 - -; Sets the directory name where SOAP extension will put cache files. -; http://php.net/soap.wsdl-cache-dir -soap.wsdl_cache_dir="/tmp" - -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -; http://php.net/soap.wsdl-cache-ttl -soap.wsdl_cache_ttl=86400 - -; Sets the size of the cache limit. (Max. number of WSDL files to cache) -soap.wsdl_cache_limit = 5 - -[sysvshm] -; A default size of the shared memory segment -;sysvshm.init_mem = 10000 - -[ldap] -; Sets the maximum number of open links or -1 for unlimited. -ldap.max_links = -1 - -[mcrypt] -; For more information about mcrypt settings see http://php.net/mcrypt-module-open - -; Directory where to load mcrypt algorithms -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.algorithms_dir= - -; Directory where to load mcrypt modes -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.modes_dir= - -[dba] -;dba.default_handler= - -[xsl] -; Write operations from within XSLT are disabled by default. -; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44 -; Set it to 0 to allow all operations -;xsl.security_prefs = 44 - -; Local Variables: -; tab-width: 4 -; End: diff --git a/portage/make.conf b/portage/make.conf index 96f5f2a7..63057e05 100644 --- a/portage/make.conf +++ b/portage/make.conf @@ -30,6 +30,7 @@ ACCEPT_LICENSE=" \ RTCW \ RTCW-ETEULA \ dlj-1.1 \ + google-chrome \ sun-bcla-java-vm \ AdobeFlash-10 \ AdobeFlash-10.1 \ @@ -128,7 +129,7 @@ LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer nlpsolver \ #CURL_SSL="nss" PHP_TARGETS="php5-3" -#PYTHON_TARGETS="python2_7 python3_3" +PYTHON_TARGETS="python2_7 python3_3 python3_4" source /var/lib/layman/make.conf diff --git a/portage/package.keywords b/portage/package.keywords index 6a30e279..ebe7f28f 100644 --- a/portage/package.keywords +++ b/portage/package.keywords @@ -64,12 +64,15 @@ app-emulation/virtualbox-modules ~dev-libs/libindicator-12.10.1 ~dev-libs/libmateweather-1.6.2 ~dev-libs/libmateweather-1.8.0 +~net-libs/libtirpc-0.2.5 # ~dev-libs/libzeitgeist-0.3.18 ~dev-libs/nspr-4.9.1 ~dev-libs/nspr-4.9.6 ~dev-libs/nspr-4.10 +~dev-libs/nspr-4.10.7 ~dev-libs/nss-3.13.5 ~dev-libs/nss-3.15 +~dev-libs/nss-3.17.2 ~dev-libs/sgml-data-2.0.8 ~dev-libs/xml-core-0.13_p2 @@ -91,10 +94,12 @@ dev-python/pb-logging ~dev-python/pillow-2.3.0 ~dev-python/pygments-1.6 ~dev-python/pylint-0.28.0 +~dev-python/PyQt4-4.11.3 ~dev-python/python-debian-0.1.21_p2 ~dev-python/pythonmagick-0.9.10 ~dev-python/reportlab-2.6 ~dev-python/setuptools-0.8 +~dev-python/sip-4.16.4 ~dev-python/sphinx-1.2.1 ~dev-python/sphinx-1.2.2 ~dev-python/sphinx-better-theme-0.1.5 @@ -139,6 +144,8 @@ dev-vcs/rcs-fast-export ** # ~gnome-extra/gucharmap-3.6.1 # ~gnome-extra/yelp-3.6.2 +# ~kde-base/pykde4-4.14.3 + mail-client/thunderbird ~mate-base/caja-1.8.0 @@ -201,6 +208,7 @@ mail-client/thunderbird ~media-libs/gexiv2-0.6.0 ~media-libs/libsidplayfp-1.1.0 +~media-libs/mesa-10.3.4 ~media-plugins/audacious-plugins-3.4.1 @@ -240,10 +248,12 @@ net-im/skype ~virtual/python-pathlib-1.0 www-client/firefox +www-client/google-chrome ~x11-apps/desktopnova-0.7.4 ~x11-apps/desktopnova-0.8.1 +~x11-libs/libdrm-2.4.58 ~x11-libs/libmatewnck-1.6.1 ~x11-misc/mate-menu-editor-1.6.0 diff --git a/portage/package.use b/portage/package.use index a2200f3c..f000ebec 100644 --- a/portage/package.use +++ b/portage/package.use @@ -16,7 +16,7 @@ app-cdr/cdrdao gcdmaster app-cdr/k3b css emovix app-crypt/johntheripper custom-cflags -#app-crypt/mit-krb5 -doc +app-crypt/mit-krb5 -pkinit app-crypt/seahorse-plugins applet #app-doc/xorg-docs -doc @@ -32,8 +32,9 @@ app-misc/beagle chm ole thunderbird app-misc/mc sftp app-misc/strigi hyperestraier inotify app-misc/tomboy galago -app-misc/tracker -xine +app-misc/tracker -ffmpeg -xine +app-office/akonadi-server -postgres soprano app-office/libreoffice nlpsolver pdfimport presenter-console presenter-minimizer scripting-javascript app-portage/eix optimization strong-optimization @@ -92,6 +93,7 @@ dev-perl/Template-Toolkit latex dev-python/ipython gnuplot smp wxwidgets dev-python/jinja -doc i18n +dev-python/pygments -doc #dev-python/PyQt4 assistant declarative multimedia phonon qt3support sql webkit xmlpatterns dev-python/PyQt4 assistant declarative multimedia qt3support script sql webkit xmlpatterns dev-python/sphinx -doc @@ -251,7 +253,7 @@ net-misc/curl libssh2 net-misc/iputils caps gnutls net-misc/networkmanager dhcpcd nss net-misc/ntp parse-clocks -zeroconf -net-misc/openssh X509 sftplogging +net-misc/openssh -X509 sftplogging net-misc/openvpn down-root eurephia iproute2 passwordsave net-misc/rdesktop rdpusb net-misc/spice-gtk -pulseaudio @@ -318,6 +320,7 @@ x11-apps/xinit -minimal x11-base/xorg-server dmx kdrive xnest xvfb x11-base/xorg-x11 -doc +x11-libs/colord-gtk -doc x11-libs/cairo glitz x11-libs/qt glib pch qt3support # move x11-libs/qt-core dev-qt/qtcore diff --git a/postfix/main.cf b/postfix/main.cf index 5e3d60fd..6ffa90b0 100644 --- a/postfix/main.cf +++ b/postfix/main.cf @@ -5,7 +5,7 @@ # For common configuration examples, see BASIC_CONFIGURATION_README # and STANDARD_CONFIGURATION_README. To find these documents, use # the command "postconf html_directory readme_directory", or go to -# http://www.postfix.org/. +# http://www.postfix.org/BASIC_CONFIGURATION_README.html etc. # # For best results, change no more than 2-3 parameters at a time, # and test if Postfix still works after every change. @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.10.3/html +html_directory = /usr/share/doc/postfix-2.11.3/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.10.3/readme +readme_directory = /usr/share/doc/postfix-2.11.3/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/postfix/master.cf b/postfix/master.cf index ec708eb8..79ca4bb6 100644 --- a/postfix/master.cf +++ b/postfix/master.cf @@ -1,6 +1,7 @@ # # Postfix master process configuration file. For details on the format -# of the file, see the master(5) manual page (command: "man 5 master"). +# of the file, see the master(5) manual page (command: "man 5 master" or +# on-line: http://www.postfix.org/master.5.html). # # Do not forget to execute "postfix reload" after editing this file. # @@ -21,7 +22,8 @@ smtp inet n - n - - smtpd # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions -# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject +# -o smtpd_recipient_restrictions= +# -o smtpd_relay_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - n - - smtpd # -o syslog_name=postfix/smtps @@ -31,7 +33,8 @@ smtp inet n - n - - smtpd # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions -# -o smtpd_recipient_restrictions=permit_sasl_authenticated,reject +# -o smtpd_recipient_restrictions= +# -o smtpd_relay_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - n - - qmqpd pickup unix n - n 60 1 pickup diff --git a/ppp/ip-down.d/50-initd.sh b/ppp/ip-down.d/50-initd.sh index 21061b2f..3e97c21c 100644 --- a/ppp/ip-down.d/50-initd.sh +++ b/ppp/ip-down.d/50-initd.sh @@ -4,9 +4,12 @@ # Used parameters and environment variables: # $1 - interface name (e.g. ppp0) -if [ -x /etc/init.d/net.$1 ]; then - if /etc/init.d/net.$1 --quiet status ; then - export IN_BACKGROUND="true" - /etc/init.d/net.$1 --quiet stop +# Execute only if OpenRC is active, bug #490820 +if [ -r /run/openrc/softlevel ]; then + if [ -x /etc/init.d/net.$1 ]; then + if /etc/init.d/net.$1 --quiet status ; then + export IN_BACKGROUND="true" + /etc/init.d/net.$1 --quiet stop + fi fi fi diff --git a/ppp/ip-up.d/50-initd.sh b/ppp/ip-up.d/50-initd.sh index 8e308624..f717dc1b 100644 --- a/ppp/ip-up.d/50-initd.sh +++ b/ppp/ip-up.d/50-initd.sh @@ -4,9 +4,12 @@ # Used parameters and environment variables: # $1 - interface name (e.g. ppp0) -if [ -x /etc/init.d/net.$1 ]; then - if ! /etc/init.d/net.$1 --quiet status ; then - export IN_BACKGROUND="true" - /etc/init.d/net.$1 --quiet start +# Execute only if OpenRC is active, bug #490820 +if [ -r /run/openrc/softlevel ]; then + if [ -x /etc/init.d/net.$1 ]; then + if ! /etc/init.d/net.$1 --quiet status ; then + export IN_BACKGROUND="true" + /etc/init.d/net.$1 --quiet start + fi fi fi diff --git a/profile.d/vte.sh b/profile.d/vte.sh index bbd84e36..3b57f838 100644 --- a/profile.d/vte.sh +++ b/profile.d/vte.sh @@ -1,19 +1,18 @@ # Copyright © 2006 Shaun McCance # Copyright © 2013 Peter De Wachter # -# This program is free software; you can redistribute it and/or modify +# This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or +# the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# along with this program. If not, see . # Not bash or zsh? [ -n "$BASH_VERSION" -o -n "$ZSH_VERSION" ] || return 0 @@ -57,7 +56,7 @@ __vte_prompt_command() { case "$TERM" in xterm*|vte*) [ -n "$BASH_VERSION" ] && PROMPT_COMMAND="__vte_prompt_command" - [ -n "$ZSH_VERSION" ] && chpwd_functions+=(__vte_osc7) + [ -n "$ZSH_VERSION" ] && precmd_functions+=(__vte_osc7) ;; esac diff --git a/profile.env b/profile.env index c04eb471..1c65a173 100644 --- a/profile.env +++ b/profile.env @@ -4,15 +4,16 @@ export ANT_HOME='/usr/share/ant' export CONFIG_PROTECT='/var/bind /usr/share/gnupg/qualified.txt /var/lib/hsqldb /usr/share/config' -export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/apache2-php5.3/ext-active/ /etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild' +export CONFIG_PROTECT_MASK='/etc/gentoo-release /etc/sandbox.d /etc/php/cli-php5.5/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/dconf /etc/ca-certificates.conf /etc/texmf/web2c /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/revdep-rebuild' export CVS_RSH='ssh' export EDITOR='/usr/bin/vim' +export ES_BASHCOMP_DIRS='/usr/share/bash-completion/completions' export FLTK_DOCDIR='/usr/share/doc/fltk-1.3.2/html' export GCC_SPECS='' export GSETTINGS_BACKEND='dconf' export GUILE_LOAD_PATH='/usr/share/guile/1.8' export HG='/usr/bin/hg' -export INFOPATH='/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.2/info' +export INFOPATH='/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/info' export JAVACC_HOME='/usr/share/javacc/' export LANG='de_DE.UTF-8' export LC_ADDRESS='de_DE.utf8' @@ -30,17 +31,17 @@ export LC_TIME='de_DE.utf8' export LESS='-R -M --shift 5' export LESSOPEN='|lesspipe %s' export LIBBLURAY_CP='/usr/share/libbluray/lib/libbluray.jar' -export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.7.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.23.2/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.3/man/:/usr/lib64/php5.5/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.3/man/' +export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.5/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.3/man/' export MULTIOSDIRS='../lib64:../lib32' export OPENGL_PROFILE='xorg-x11' export PAGER='/usr/bin/less' -export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3:/usr/lib64/subversion/bin:/usr/games/bin' -export PRELINK_PATH_MASK='/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so:/opt/bin/skype' +export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.3:/usr/lib64/subversion/bin:/usr/games/bin' +export PRELINK_PATH_MASK='/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so:/usr/bin/evolution:/opt/bin/skype' export PYTHONDOCS_2_7='/usr/share/doc/python-docs-2.7.3/html/library' export PYTHONDOCS_3_3='/usr/share/doc/python-docs-3.3.2/html/library' export QT_GRAPHICSSYSTEM='raster' export QT_PLUGIN_PATH='/usr/lib64/kde4/plugins' -export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.7.3:/usr/lib64/subversion/bin' +export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.3:/usr/lib64/subversion/bin' export RUBYOPT='-rauto_gem' export R_HOME='/usr/lib64/R' export VBOX_APP_HOME='/usr/lib64/virtualbox' diff --git a/revdep-rebuild/61-icedtea-bin-6 b/revdep-rebuild/61-icedtea-bin-6 index 59221b2b..134ce4f4 100644 --- a/revdep-rebuild/61-icedtea-bin-6 +++ b/revdep-rebuild/61-icedtea-bin-6 @@ -1 +1 @@ -SEARCH_DIRS_MASK="/opt/icedtea-bin-6.1.13.3" +SEARCH_DIRS_MASK="/opt/icedtea-bin-6.1.13.5" diff --git a/revdep-rebuild/61-oracle-jdk-bin-1.7 b/revdep-rebuild/61-oracle-jdk-bin-1.7 index a0ed67e6..b829756b 100644 --- a/revdep-rebuild/61-oracle-jdk-bin-1.7 +++ b/revdep-rebuild/61-oracle-jdk-bin-1.7 @@ -1 +1 @@ -SEARCH_DIRS_MASK="/opt/oracle-jdk-bin-1.7.0.55" +SEARCH_DIRS_MASK="/opt/oracle-jdk-bin-1.7.0.71" diff --git a/revdep-rebuild/61-oracle-jre-bin-1.7 b/revdep-rebuild/61-oracle-jre-bin-1.7 index 4fbb53f9..a62c1b6b 100644 --- a/revdep-rebuild/61-oracle-jre-bin-1.7 +++ b/revdep-rebuild/61-oracle-jre-bin-1.7 @@ -1 +1 @@ -SEARCH_DIRS_MASK="/opt/oracle-jre-bin-1.7.0.55" +SEARCH_DIRS_MASK="/opt/oracle-jre-bin-1.7.0.71" diff --git a/security/limits.conf b/security/limits.conf index 5d5c3f70..fd66ab77 100644 --- a/security/limits.conf +++ b/security/limits.conf @@ -6,7 +6,7 @@ # #Where: # can be: -# - an user name +# - a user name # - a group name, with @group syntax # - the wildcard *, for default entry # - the wildcard %, can be also used with %group syntax, diff --git a/sgml/catalog b/sgml/catalog index ee4b4fcd..0934ffc2 100644 --- a/sgml/catalog +++ b/sgml/catalog @@ -15,7 +15,7 @@ CATALOG "/etc/sgml/sgml-docbook-4.0.cat" CATALOG "/etc/sgml/xml-simple-docbook-4.1.2.4.cat" CATALOG "/etc/sgml/xml-simple-docbook-1.0.cat" CATALOG "/etc/sgml/xhtml1.cat" -CATALOG "/etc/sgml/linuxdoc.cat" CATALOG "/etc/sgml/sgml-data-2.0.8.cat" CATALOG "/etc/sgml/xml-core-0.13_p2.cat" CATALOG "/etc/sgml/debiandoc-sgml-1.2.27.cat" +CATALOG "/etc/sgml/linuxdoc.cat" diff --git a/shadow b/shadow index 8bb73568..28bbc24a 100644 --- a/shadow +++ b/shadow @@ -57,3 +57,7 @@ qemu:!:16023:::::: colord:!:16099:::::: geoclue:!:16143:::::: dhcp:!:16237:::::: +systemd-bus-proxy:!:16398:::::: +systemd-network:!:16398:::::: +systemd-resolve:!:16398:::::: +systemd-timesync:!:16398:::::: diff --git a/shadow- b/shadow- index e9801de6..7716051e 100644 --- a/shadow- +++ b/shadow- @@ -56,3 +56,7 @@ ulogd:!:15842:::::: qemu:!:16023:::::: colord:!:16099:::::: geoclue:!:16143:::::: +dhcp:!:16237:::::: +systemd-bus-proxy:!:16398:::::: +systemd-network:!:16398:::::: +systemd-resolve:!:16398:::::: diff --git a/smartd_warning.sh b/smartd_warning.sh index 91f4f89d..6a1df141 100755 --- a/smartd_warning.sh +++ b/smartd_warning.sh @@ -2,7 +2,7 @@ # # smartd warning script # -# Copyright (C) 2012-13 Christian Franke +# Copyright (C) 2012-14 Christian Franke # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -12,22 +12,23 @@ # You should have received a copy of the GNU General Public License # (for example COPYING); If not, see . # -# $Id: smartd_warning.sh.in 3784 2013-03-06 22:02:54Z chrfranke $ +# $Id: smartd_warning.sh.in 3932 2014-06-29 19:02:38Z chrfranke $ # set -e # Set by config.status PACKAGE="smartmontools" -VERSION="6.1" +VERSION="6.3" prefix="/usr" sysconfdir="/etc" +smartdscriptdir="${sysconfdir}" # Default mailer os_mailer="mail" -# Plugin directory -plugindir="$sysconfdir/smartd_warning.d" +# Plugin directory (disabled if empty) +plugindir="${smartdscriptdir}/smartd_warning.d" # Parse options dryrun= @@ -45,7 +46,7 @@ Usage: export SMARTD_MESSAGE='Error Message' export SMARTD_FAILTYPE='Type of failure, "EMailTest" for tests' export SMARTD_TFIRST='Date of first message sent, empty if none' - export SMARTD_TFIRSTEPOCH='time_t format of above' + #export SMARTD_TFIRSTEPOCH='time_t format of above' export SMARTD_PREVCNT='Number of previous messages, 0 if none' export SMARTD_NEXTDAYS='Number of days until next message, empty if none' export SMARTD_DEVICEINFO='Device identify information' @@ -63,7 +64,7 @@ if [ -z "${SMARTD_ADDRESS}${SMARTD_MAILER}" ]; then fi # Get host and domain names -for cmd in 'hostname' 'uname -n' 'echo "${HOSTNAME?unset}"' 'echo "[Unknown]"'; do +for cmd in 'hostname' 'echo "[Unknown]"'; do hostname=`eval $cmd 2>/dev/null` || continue test -n "$hostname" || continue break @@ -71,27 +72,22 @@ done dnsdomain=${hostname#*.} if [ "$dnsdomain" != "$hostname" ]; then - # BSD 'hostname' prints FQDN + # hostname command printed FQDN hostname=${hostname%%.*} else - # Linux Cygwin - for cmd in 'dnsdomainname' 'echo "${USERDNSDOMAIN?unset}"' 'echo'; do + for cmd in 'dnsdomainname' 'hostname -d' 'echo'; do dnsdomain=`eval $cmd 2>/dev/null` || continue break done + test "$dnsdomain" != "(none)" || dnsdomain= fi -for cmd in 'nisdomainname' 'ypdomainname' 'domainname' 'echo'; do +for cmd in 'nisdomainname' 'hostname -y' 'domainname' 'echo'; do nisdomain=`eval $cmd 2>/dev/null` || continue break done test "$nisdomain" != "(none)" || nisdomain= -case $OS in - Windows*) windomain=$USERDOMAIN ;; - *) windomain= ;; -esac - # Format subject export SMARTD_SUBJECT="SMART error (${SMARTD_FAILTYPE-[SMARTD_FAILTYPE]}) detected on host: $hostname" @@ -103,8 +99,8 @@ fullmessage=` echo " DNS domain: ${dnsdomain:-[Empty]}" test -z "$nisdomain" || echo " NIS domain: $nisdomain" - test -z "$windomain" || - echo " Win domain: $windomain" + #test -z "$USERDOMAIN" || + # echo " Win domain: $USERDOMAIN" echo echo "The following warning/error was logged by the smartd daemon:" echo @@ -132,7 +128,8 @@ export SMARTD_FULLMESSAGE="$fullmessage " # Run plugin scripts if requested -case " $SMARTD_ADDRESS" in +if test -n "$plugindir"; then + case " $SMARTD_ADDRESS" in *\ @*) if [ -n "$dryrun" ]; then echo "export SMARTD_SUBJECT='$SMARTD_SUBJECT'" @@ -182,7 +179,8 @@ case " $SMARTD_ADDRESS" in # Send email to remaining addresses test -n "$SMARTD_ADDRESS" || exit 0 ;; -esac + esac +fi # Send mail or run command if [ -n "$SMARTD_ADDRESS" ]; then diff --git a/speech-dispatcher/modules/espeak-mbrola-generic.conf b/speech-dispatcher/modules/espeak-mbrola-generic.conf index e83d6b5b..a50df509 100644 --- a/speech-dispatcher/modules/espeak-mbrola-generic.conf +++ b/speech-dispatcher/modules/espeak-mbrola-generic.conf @@ -18,7 +18,7 @@ # can modify this value, see other parameters). # The command can be split into more lines, if necessary, using '\'. GenericExecuteSynth \ -"echo \'$DATA\' | espeak -v mb-$VOICE $PUNCT -s $RATE -a $VOLUME | mbrola -v $VOLUME -e /usr/share/mbrola/$VOICE/$VOICE - -.au | $PLAY_COMMAND +"echo \'$DATA\' | espeak -v mb-$VOICE -s $RATE -p $PITCH $PUNCT -q --stdin --pho | mbrola -v $VOLUME -e /usr/share/mbrola/$VOICE/$VOICE - -.au | $PLAY_COMMAND # The following three items control punctuation levels None, Some, and All. # Each of these values will be substituted into the $PUNCT variable depending diff --git a/speech-dispatcher/modules/ibmtts.conf b/speech-dispatcher/modules/ibmtts.conf index 85551070..ef996406 100644 --- a/speech-dispatcher/modules/ibmtts.conf +++ b/speech-dispatcher/modules/ibmtts.conf @@ -9,6 +9,66 @@ # IbmttsUseSSML 1 +# -- User dictionaries -- + +# IBM TTS supports user dictionaries so that you may customize +# the pronunciation of words, beginning of words or abbreviations +# according to the language. +# +# IbmttsDictionaryFolder defines the root directory under which you +# may add your dictionary files. If several languages are installed, +# you may want to create one sub-directory per language. +# +# Three examples : +# +# - a single language is installed: +# place your files under IbmttsDictionaryFolder +# +# - two languages are installed, say English and French: +# place your files under IbmttsDictionaryFolder in sub-directories en and fr +# +# - the same language for different regions are installed, say Castilian +# Spanish and Mexican Spanish: +# place your files in directories es_ES and es_MX +# +# The directory names are listed below (DIRECTORY NAMES and EXTENDED +# DIRECTORY NAMES). +# +# The name of the dictionary files are: +# +# - main.dct: main dictionary +# - root.dct: roots dictionary +# - extension.dct: main extension dictionary +# - abbreviation.dct: abbreviation dictionary +# +# The IBM TTS documentation details the syntax of the user dictionaries. +# Basically, it is one line per entry, composed of key, tabulation, value. +# +# DIRECTORY NAMES +# --------------- +# de: German +# en: English +# es: Spanish +# fi: Finnish +# fr: French +# it: Italian +# ja: Japanese +# pt: Portuguese +# zh: Chinese +# +# EXTENDED DIRECTORY NAMES +# ------------------------ +# en_GB: British English +# en_US: American English +# fr_CA: Canadian French +# fr_FR: French +# pt_BR: Brazilian Portuguese +# zh_CN: Mandarin Chinese +# zh_TW: Mandarin Taiwanese + +IbmttsDictionaryFolder "/var/opt/IBM/ibmtts/dict" + + # -- Abbreviation dictionaries -- # Enable the abbreviation dictionaries. diff --git a/speech-dispatcher/modules/pico-generic.conf b/speech-dispatcher/modules/pico-generic.conf new file mode 100644 index 00000000..df4371f5 --- /dev/null +++ b/speech-dispatcher/modules/pico-generic.conf @@ -0,0 +1,77 @@ +# pico output module is based on the generic plugin for Speech +# Dispatcher. It means there is no code written explicitly for +# this plugin, all the specifics are handled in this configuration +# and we call a simple command line client to perform the actual +# synthesis. Use this config file with the sd_generic output module. +# +# IMPORTANT: The audio output method relies on an audio playback +# utility (play, aplay, paplay for OSS, ALSA or Pulse) +# being installed. If this is not the case, consider installing it +# or replace the $PLAY_COMMAND string in the GenericExecuteString below +# with play, paplay or similar. +# +# GenericExecuteSynth is the shell command that should be +# executed in order to say some message. This command must +# stop saying the message on SIGKILL, otherwise it's useless. +# You can use the variables $LANGUAGE, $VOICE, $PITCH and $RATE +# which will be substituted for the appropriate value (you +# can modify this value, see other parameters). +# The command can be split into more lines, if necessary, using '\'. +GenericExecuteSynth \ +"pico2wave -w $TMPDIR/pico.wav -l $VOICE \'$DATA\' && $PLAY_COMMAND $TMPDIR/pico.wav + +# The following three items control punctuation levels None, Some, and All. +# Each of these values will be substituted into the $PUNCT variable depending +# on the value passed to speech dispatcher from applications. +# Note that if an empty string is specified, then $PUNCT will be blank +# which is a default situation for espeak. + +GenericPunctNone " " +GenericPunctSome "--punct=\"()[]{};:\"" +GenericPunctAll "--punct" + +# GenericStripPunctChars is a list (enclosed in doublequotes) of +# all the characters that should be replaced by whitespaces in +# order not to be badly handled by the output module or misinterpreted +# by shell. +# GenericStripPunctChars "" + +# If the language you need to pass in $LANG is different +# from the standard ISO language code, you can specify +# which string to use instead. If you wish to use +# other than ISO charset for the specified language, +# you can add it's name (as accepted by iconv) as a +# third parameter in doublequotes. + + +GenericLanguage "en" "en" "utf-8" +GenericLanguage "de" "de" "utf-8" +GenericLanguage "es" "es" "utf-8" +GenericLanguage "fr" "fr" "utf-8" +GenericLanguage "it" "it" "utf-8" + +# AddVoice specifies which $VOICE string should be assigned to +# each language and symbolic voice name. All the voices you want +# to use must be specified here. This list will likely not be +# up-to-date, please check pico documentation and add the voices +# you want to use. + +AddVoice "en" "FEMALE1" "en-US" +AddVoice "en" "FEMALE2" "en-GB" +AddVoice "de" "FEMALE1" "de-DE" +AddVoice "es" "FEMALE1" "es-ES" +AddVoice "fr" "FEMALE1" "fr-FR" +AddVoice "it" "FEMALE1" "it-IT" + +# Yes, it's wrong, but this way you at least get something even when configured +# (by default) to use a male voice +AddVoice "en" "MALE1" "en-US" +AddVoice "en" "MALE2" "en-GB" +AddVoice "de" "MALE1" "de-DE" +AddVoice "es" "MALE1" "es-ES" +AddVoice "fr" "MALE1" "fr-FR" +AddVoice "it" "MALE1" "it-IT" + +# Debug turns debugging on or off +# See speechd.conf for information where debugging information is stored +Debug 0 diff --git a/speech-dispatcher/speechd.conf b/speech-dispatcher/speechd.conf index 3576a11a..f44cab10 100644 --- a/speech-dispatcher/speechd.conf +++ b/speech-dispatcher/speechd.conf @@ -35,7 +35,7 @@ # Port 6560 # By default, if "inet_socket" communication method is used, the specified port is opened only -# for connections comming from localhost. If LocalhostAccessOnly is set to 0 it disables this +# for connections coming from localhost. If LocalhostAccessOnly is set to 0 it disables this # access controll. It means that the port will be accessible from all computers on the # network. If you turn off this option, please make sure you set up some system rules on what # computers are and are not allowed to access the Speech Dispatcher port. @@ -44,28 +44,25 @@ # -----LOGGING CONFIGURATION----- -# The LogLevel is a number between 0 and 5 that specifies -# how much of the logging information should be printed -# out on the screen or in the logfile (see LogFile) +# The LogLevel is a number between 0 and 5 specifying the +# verbosity of information to the logfile or screen # 0 means nothing, 5 means everything (not recommended). LogLevel 3 -# The LogDir specifies where Speech Dispatcher writes its logging messages -# (status information, error messages, etc.). Specify "stdout" for -# standard console output or a directory path. 'default' means that +# The LogDir specifies where the Speech Dispatcher logs reside +# Specify "stdout" for standard console output +# or a custom log directory path. 'default' means # the logs are written to the default destination (e.g. a preconfigured # system directory or the home directory if .speech-dispatcher is present) -# DO NOT COMMENT OUT THIS OPTION, SET IT TO "default" if you do not -# want to influence it. +# DO NOT COMMENT OUT THIS OPTION, leave as "default" for standard logging LogDir "default" #LogDir "/var/log/speech-dispatcher/" #LogDir "stdout" -# The CustomLogFile allows logging all messages of the given kind, -# regardless their priority, to the given destination. - +# The CustomLogFile allows logging all messages # regardless of +# priority, to the given destination. #CustomLogFile "protocol" "/var/log/speech-dispatcher/speech-dispatcher-protocol.log" # ----- VOICE PARAMETERS ----- @@ -82,7 +79,7 @@ LogDir "default" # DefaultPitch 0 -# The DefaultVolume constrols the default volume of the voice. It is +# The DefaultVolume controls the default volume of the voice. It is # a value between -100 (softly) and +100 (loudly). Currently, +100 # maps to the default volume of the synthesizer. @@ -91,7 +88,7 @@ DefaultVolume 100 # The DefaultVoiceType controls which voice type should be used by # default. Voice types are symbolic names which map to particular # voices provided by the synthesizer according to the output module -# configuratuion. Please see the synthesizer-specific configuration +# configuration. Please see the synthesizer-specific configuration # in etc/speech-dispatcher/modules/ to see which voices are assigned to # different symbolic names. The following symbolic names are # currently supported: MALE1, MALE2, MALE3, FEMALE1, FEMALE2, FEMALE3, @@ -141,7 +138,7 @@ DefaultVolume 100 # DefaultCapLetRecognition "none" -# The DefaultSpelling: if set to On, all messages will be spelled +# The DefaultSpelling: if set to On, all messages will be spelt # unless set otherwise (this is usually not something you want to do.) # DefaultSpelling Off @@ -188,7 +185,7 @@ DefaultVolume 100 # -- NAS parameters -- # Route to the Network Audio System server when NAS -# was chosen for the audio output. Note that NAS +# is chosen for the audio output. Note that NAS # server doesn't need to run on your machine, # you can use it also over network (for instance # when working on remote machines). @@ -201,7 +198,7 @@ DefaultVolume 100 # Each AddModule line loads an output module. # Syntax: AddModule "name" "binary" "configuration" "logfile" -# - name is the name under which you can acces this module +# - name is the name under which you can access this module # - binary is the path to the binary executable of this module, # either relative (to lib/speech-dispatcher-modules/) or absolute # - configuration is the path to the config file of this module, @@ -217,6 +214,7 @@ DefaultVolume 100 #AddModule "swift-generic" "sd_generic" "swift-generic.conf" #AddModule "epos-generic" "sd_generic" "epos-generic.conf" #AddModule "dtk-generic" "sd_generic" "dtk-generic.conf" +#AddModule "pico-generic" "sd_generic" "pico-generic.conf" #AddModule "ibmtts" "sd_ibmtts" "ibmtts.conf" #AddModule "cicero" "sd_cicero" "cicero.conf" @@ -253,8 +251,8 @@ DefaultModule espeak # DefaultPunctuationMode "some" # ...and/or some other settings # EndClient -# The parameter of BeginClient tells Speech Dispatcher to which clients -# it should apply this settings (it does glob-style matching, you can use +# The parameter of BeginClient tells Speech Dispatcher which clients +# it should apply the settings to (it does glob-style matching, you can use # * to match any number of characters and ? to match one character) # There are some sample client settings diff --git a/ssh/ssh_config b/ssh/ssh_config index 9bec822b..cdd58d07 100644 --- a/ssh/ssh_config +++ b/ssh/ssh_config @@ -1,4 +1,4 @@ -# $OpenBSD$ +# $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $ # This is the ssh client system-wide configuration file. See # ssh_config(5) for more information. This file provides defaults for @@ -42,17 +42,6 @@ Host * # Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc # MACs hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160 # EscapeChar ~ -# AllowedCertPurpose sslserver -# MandatoryCRL no -# CACertificateFile /etc/ssh/ca/ca-bundle.crt -# CACertificatePath /etc/ssh/ca/crt -# CARevocationFile /etc/ssh/ca/ca-bundle.crl -# CARevocationPath /etc/ssh/ca/crl -# UserCACertificateFile ~/.ssh/ca-bundle.crt -# UserCACertificatePath ~/.ssh/crt -# UserCARevocationFile ~/.ssh/ca-bundle.crl -# UserCARevocationPath ~/.ssh/crl -# VAType none # Tunnel no # TunnelDevice any:any # PermitLocalCommand no diff --git a/ssh/sshd_config b/ssh/sshd_config index 7bbd37f7..f6717754 100644 --- a/ssh/sshd_config +++ b/ssh/sshd_config @@ -1,4 +1,4 @@ -# $OpenBSD$ +# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. @@ -26,72 +26,6 @@ #HostKey /etc/ssh/ssh_host_ecdsa_key #HostKey /etc/ssh/ssh_host_ed25519_key -# "key type names" for X.509 certificates with RSA key -# Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-rsa,rsa-sha1 -#X509KeyAlgorithm x509v3-sign-rsa,rsa-md5 - -# "key type names" for X.509 certificates with DSA key -# Note first defined is used in signature operations! -#X509KeyAlgorithm x509v3-sign-dss,dss-asn1 -#X509KeyAlgorithm x509v3-sign-dss,dss-raw - -# The intended use for the X509 client certificate. Without this option -# no chain verification will be done. Currently accepted uses are case -# insensitive: -# - "sslclient", "SSL client", "SSL_client" or "client" -# - "any", "Any Purpose", "Any_Purpose" or "AnyPurpose" -# - "skip" or ""(empty): don`t check purpose. -#AllowedCertPurpose sslclient - -# Specifies whether self-issued(self-signed) X.509 certificate can be -# allowed only by entry in AutorizedKeysFile that contain matching -# public key or certificate blob. -#KeyAllowSelfIssued no - -# Specifies whether CRL must present in store for all certificates in -# certificate chain with atribute "cRLDistributionPoints" -#MandatoryCRL no - -# A file with multiple certificates of certificate signers -# in PEM format concatenated together. -#CACertificateFile /etc/ssh/ca/ca-bundle.crt - -# A directory with certificates of certificate signers. -# The certificates should have name of the form: [HASH].[NUMBER] -# or have symbolic links to them of this form. -#CACertificatePath /etc/ssh/ca/crt - -# A file with multiple CRL of certificate signers -# in PEM format concatenated together. -#CARevocationFile /etc/ssh/ca/ca-bundle.crl - -# A directory with CRL of certificate signers. -# The CRL should have name of the form: [HASH].r[NUMBER] -# or have symbolic links to them of this form. -#CARevocationPath /etc/ssh/ca/crl - -# LDAP protocol version. -# Example: -# CAldapVersion 2 - -# Note because of OpenSSH options parser limitation -# use %3D instead of = ! -# LDAP initialization may require URL to be escaped, i.e. -# use %2C instead of ,(comma). Escaped URL don't depend from -# LDAP initialization method. -# Example: -# CAldapURL ldap://localhost:389/dc%3Dexample%2Cdc%3Dcom - -# SSH can use "Online Certificate Status Protocol"(OCSP) -# to validate certificate. Set VAType to -# - none : do not use OCSP to validate certificates; -# - ocspcert: validate only certificates that specify `OCSP -# Service Locator' URL; -# - ocspspec: use specified in the configuration 'OCSP Responder' -# to validate all certificates. -#VAType none - # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 @@ -137,7 +71,6 @@ PermitRootLogin yes # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no -#PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords @@ -194,13 +127,29 @@ UsePrivilegeSeparation sandbox # Default for new installations. # Allow client to pass locale environment variables AcceptEnv LANG LC_* +# here are the new patched ldap related tokens +# entries in your LDAP must have posixAccount & ldapPublicKey objectclass +#UseLPK yes +#LpkLdapConf /etc/ldap.conf +#LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/ +#LpkUserDN ou=users,dc=phear,dc=org +#LpkGroupDN ou=groups,dc=phear,dc=org +#LpkBindDN cn=Manager,dc=phear,dc=org +#LpkBindPw secret +#LpkServerGroup mail +#LpkFilter (hostAccess=master.phear.org) +#LpkForceTLS no +#LpkSearchTimelimit 3 +#LpkBindTimelimit 3 +#LpkPubKeyAttr sshPublicKey + # override default of no subsystems Subsystem sftp /usr/lib64/misc/sftp-server # the following are HPN related configuration options # tcp receive buffer polling. disable in non autotuning kernels #TcpRcvBufPoll yes - + # disable hpn performance boosts #HPNDisabled no diff --git a/sudoers b/sudoers index 15ae4fb6..47d1316c 100644 --- a/sudoers +++ b/sudoers @@ -27,6 +27,7 @@ ## Groups of commands. Often used to group related commands together. # Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \ # /usr/bin/pkill, /usr/bin/top +# Cmnd_Alias REBOOT = /sbin/halt, /sbin/reboot, /sbin/poweroff ## ## Defaults specification @@ -60,7 +61,7 @@ # Defaults log_output # Defaults!/usr/bin/sudoreplay !log_output # Defaults!/usr/local/bin/sudoreplay !log_output -# Defaults!/sbin/reboot !log_output +# Defaults!REBOOT !log_output ## ## Runas alias specification diff --git a/sysconfig/libvirt-guests b/sysconfig/libvirt-guests deleted file mode 100644 index d1f20510..00000000 --- a/sysconfig/libvirt-guests +++ /dev/null @@ -1,41 +0,0 @@ -# URIs to check for running guests -# example: URIS='default xen:/// vbox+tcp://host/system lxc:///' -#URIS=default - -# action taken on host boot -# - start all guests which were running on shutdown are started on boot -# regardless on their autostart settings -# - ignore libvirt-guests init script won't start any guest on boot, however, -# guests marked as autostart will still be automatically started by -# libvirtd -#ON_BOOT=start - -# Number of seconds to wait between each guest start. Set to 0 to allow -# parallel startup. -#START_DELAY=0 - -# action taken on host shutdown -# - suspend all running guests are suspended using virsh managedsave -# - shutdown all running guests are asked to shutdown. Please be careful with -# this settings since there is no way to distinguish between a -# guest which is stuck or ignores shutdown requests and a guest -# which just needs a long time to shutdown. When setting -# ON_SHUTDOWN=shutdown, you must also set SHUTDOWN_TIMEOUT to a -# value suitable for your guests. -#ON_SHUTDOWN=suspend - -# If set to non-zero, shutdown will suspend guests concurrently. Number of -# guests on shutdown at any time will not exceed number set in this variable. -#PARALLEL_SHUTDOWN=0 - -# Number of seconds we're willing to wait for a guest to shut down. If parallel -# shutdown is enabled, this timeout applies as a timeout for shutting down all -# guests on a single URI defined in the variable URIS. If this is 0, then there -# is no time out (use with caution, as guests might not respond to a shutdown -# request). The default value is 300 seconds (5 minutes). -#SHUTDOWN_TIMEOUT=300 - -# If non-zero, try to bypass the file system cache when saving and -# restoring guests, even though this may give slower operation for -# some file systems. -#BYPASS_CACHE=0 diff --git a/sysconfig/libvirtd b/sysconfig/libvirtd deleted file mode 100644 index f15e5956..00000000 --- a/sysconfig/libvirtd +++ /dev/null @@ -1,33 +0,0 @@ -# Override the default config file -# NOTE: This setting is no longer honoured if using -# systemd. Set '--config /etc/libvirt/libvirtd.conf' -# in LIBVIRTD_ARGS instead. -#LIBVIRTD_CONFIG=/etc/libvirt/libvirtd.conf - -# Listen for TCP/IP connections -# NB. must setup TLS/SSL keys prior to using this -#LIBVIRTD_ARGS="--listen" - -# Override Kerberos service keytab for SASL/GSSAPI -#KRB5_KTNAME=/etc/libvirt/krb5.tab - -# Override the QEMU/SDL default audio driver probing when -# starting virtual machines using SDL graphics -# -# NB these have no effect for VMs using VNC, unless vnc_allow_host_audio -# is enabled in /etc/libvirt/qemu.conf -#QEMU_AUDIO_DRV=sdl -# -#SDL_AUDIODRIVER=pulse - -# Override the maximum number of opened files. -# This only works with traditional init scripts. -# In the systemd world, the limit can only be changed by overriding -# LimitNOFILE for libvirtd.service. To do that, just create a *.conf -# file in /etc/systemd/system/libvirtd.service.d/ (for example -# /etc/systemd/system/libvirtd.service.d/openfiles.conf) and write -# the following two lines in it: -# [Service] -# LimitNOFILE=2048 -# -#LIBVIRTD_NOFILES_LIMIT=2048 diff --git a/sysconfig/virtlockd b/sysconfig/virtlockd deleted file mode 100644 index d44dc464..00000000 --- a/sysconfig/virtlockd +++ /dev/null @@ -1,3 +0,0 @@ -# -# Pass extra arguments to virtlockd -#VIRTLOCKD_ARGS= diff --git a/sysstat b/sysstat index 8694e31d..c18f2de5 100644 --- a/sysstat +++ b/sysstat @@ -1,4 +1,4 @@ -# sysstat-10.2.1 configuration file. +# sysstat-11.0.2 configuration file. # How long to keep log files (in days). # If value is greater than 28, then log files are kept in @@ -12,3 +12,9 @@ COMPRESSAFTER=10 # which are used for the generation of log files. SADC_OPTIONS="" +# Directory where sa and sar files are saved. +SA_DIR=/var/log/sa + +# Compression program to use. +ZIP="bzip2" + diff --git a/systemd/bootchart.conf b/systemd/bootchart.conf index 48fad027..d7e0dabe 100644 --- a/systemd/bootchart.conf +++ b/systemd/bootchart.conf @@ -18,3 +18,4 @@ #PlotEntropyGraph=no #ScaleX=100 #ScaleY=20 +#ControlGroup=no diff --git a/systemd/coredump.conf b/systemd/coredump.conf new file mode 100644 index 00000000..0cc328f5 --- /dev/null +++ b/systemd/coredump.conf @@ -0,0 +1,17 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. +# +# See coredump.conf(5) for details + +[Coredump] +#Storage=external +#Compress=yes +#ProcessSizeMax=2G +#ExternalSizeMax=2G +#JournalSizeMax=767M +#MaxUse= +#KeepFree= diff --git a/systemd/journald.conf b/systemd/journald.conf index d106d00b..cded4a9d 100644 --- a/systemd/journald.conf +++ b/systemd/journald.conf @@ -11,7 +11,7 @@ #Storage=auto #Compress=yes #Seal=yes -#SplitMode=login +#SplitMode=uid #SyncIntervalSec=5m #RateLimitInterval=30s #RateLimitBurst=1000 diff --git a/systemd/resolved.conf b/systemd/resolved.conf new file mode 100644 index 00000000..e3165987 --- /dev/null +++ b/systemd/resolved.conf @@ -0,0 +1,11 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. +# +# See resolved.conf(5) for details + +[Resolve] +#DNS=8.8.8.8 8.8.4.4 2001:4860:4860::8888 2001:4860:4860::8844 diff --git a/systemd/system/libvirtd.d/00gentoo.conf b/systemd/system/libvirtd.d/00gentoo.conf new file mode 100644 index 00000000..f0879226 --- /dev/null +++ b/systemd/system/libvirtd.d/00gentoo.conf @@ -0,0 +1,10 @@ +# Uncomment the following three lines to start libvirtd with the '--listen' +# directive such that it listens for TCP/IP connections (honoring the +# listen_tls and listen_tcp settings in /etc/libvirt/libvirtd.conf). If +# libvirtd is started without the '--listen' parameter, network connection +# (for the daemon) is globally disabled: + +# [Service] +# ExecStart= +# ExecStart=/usr/sbin/libvirtd --listen + diff --git a/systemd/system/spamassassin.service.d/00gentoo.conf b/systemd/system/spamassassin.service.d/00gentoo.conf new file mode 100644 index 00000000..9fc1f629 --- /dev/null +++ b/systemd/system/spamassassin.service.d/00gentoo.conf @@ -0,0 +1,10 @@ +# Here you can append some options to spamd process, please +# double check that you make needed changes in service file if +# you use options requiring it +# Some options: +# +# -c to create a per user configuration file +# -H [dir] to switch home dirs for helper apps, dir optional + +[Service] +Environment="SPAMD_OPTS= -c -H" diff --git a/systemd/timesyncd.conf b/systemd/timesyncd.conf new file mode 100644 index 00000000..6e9ed9e9 --- /dev/null +++ b/systemd/timesyncd.conf @@ -0,0 +1,11 @@ +# This file is part of systemd. +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. +# +# See timesyncd.conf(5) for details + +[Time] +#Servers=0.gentoo.pool.ntp.org 1.gentoo.pool.ntp.org 2.gentoo.pool.ntp.org 3.gentoo.pool.ntp.org diff --git a/texmf/ls-R b/texmf/ls-R index 7c91452d..66ffaf37 100644 --- a/texmf/ls-R +++ b/texmf/ls-R @@ -66,8 +66,8 @@ language.texlive-langgerman.def 80jadetex.cnf ./updmap.d: -00updmap.cfg .keep_app-text_texlive-core-0 +00updmap.cfg texlive-basic.cfg texlive-context.cfg texlive-fontsextra.cfg @@ -85,8 +85,8 @@ texlive-pictures.cfg texlive-science.cfg ./web2c: -fmtutil.cnf .keep_app-text_texlive-core-0 +fmtutil.cnf texmf.cnf updmap.cfg diff --git a/udev/hwdb.bin b/udev/hwdb.bin index 7bea6fec..b57718aa 100644 Binary files a/udev/hwdb.bin and b/udev/hwdb.bin differ diff --git a/ulogd.conf b/ulogd.conf index b58522d7..313da0f9 100644 --- a/ulogd.conf +++ b/ulogd.conf @@ -197,7 +197,7 @@ sync=1 [pcap1] #default file is /var/log/ulogd/ulogd.pcap -#file=/var/log/ulogd/ulogd.pcap +#file="/var/log/ulogd/ulogd.pcap" sync=1 [mysql1] @@ -207,6 +207,13 @@ user="nupik" table="ulog" pass="changeme" procedure="INSERT_PACKET_FULL" +# backlog configuration: +# set backlog_memcap to the size of memory that will be +# allocated to store events in memory if data is temporary down +# and insert them when the database came back. +#backlog_memcap=1000000 +# number of events to insert at once when backlog is not empty +#backlog_oneshot_requests=10 [mysql2] db="nulog" @@ -224,6 +231,18 @@ table="ulog" #schema="public" pass="changeme" procedure="INSERT_PACKET_FULL" +# connstring can be used to define PostgreSQL connection string which +# contains all parameters of the connection. If set, this value has +# precedence on other variables used to build the connection string. +# See http://www.postgresql.org/docs/9.2/static/libpq-connect.html#LIBPQ-CONNSTRING +# for a complete description of options. +#connstring="host=localhost port=4321 dbname=nulog user=nupik password=changeme" +#backlog_memcap=1000000 +#backlog_oneshot_requests=10 +# If superior to 1 a thread dedicated to SQL request execution +# is created. The value stores the number of SQL request to keep +# in the ring buffer +#ring_buffer_size=1000 [pgsql2] db="nulog" diff --git a/wgetrc b/wgetrc index 70cf0528..bd4b6a2e 100644 --- a/wgetrc +++ b/wgetrc @@ -5,7 +5,10 @@ ## You can use this file to change the default behaviour of wget or to ## avoid having to type many many command-line options. This file does ## not contain a comprehensive list of commands -- look at the manual -## to find out what you can put into this file. +## to find out what you can put into this file. You can find this here: +## $ info wget.info 'Startup File' +## Or online here: +## https://www.gnu.org/software/wget/manual/wget.html#Startup-File ## ## Wget initialization file can reside in /etc/wgetrc ## (global, for all users) or $HOME/.wgetrc (for a single user). @@ -123,3 +126,9 @@ # Force the default remote server encoding #remoteencoding = UTF-8 + +# Turn on to prevent following non-HTTPS links when in recursive mode +#httpsonly = off + +# Tune HTTPS security (auto, SSLv2, SSLv3, TLSv1, PFS) +#secureprotocol = auto diff --git a/xdg/autostart/evolution-alarm-notify.desktop b/xdg/autostart/evolution-alarm-notify.desktop index da83b115..5f7dd065 100644 --- a/xdg/autostart/evolution-alarm-notify.desktop +++ b/xdg/autostart/evolution-alarm-notify.desktop @@ -11,7 +11,7 @@ Comment[en_GB]=Calendar event notifications Comment[ru]=Уведомления о календарных событиях Comment[vi]=Thông tin lịch Icon=appointment-soon -Exec=/usr/libexec/evolution/3.10/evolution-alarm-notify +Exec=/usr/libexec/evolution/3.12/evolution-alarm-notify Terminal=false Type=Application Categories= @@ -20,4 +20,4 @@ X-Meego-Priority=Low X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=evolution X-GNOME-Bugzilla-Component=calendar -X-GNOME-Bugzilla-Version=3.10.x +X-GNOME-Bugzilla-Version=3.12.x diff --git a/xdg/autostart/gnome-keyring-gpg.desktop b/xdg/autostart/gnome-keyring-gpg.desktop index 66619ed6..2f27d42a 100644 --- a/xdg/autostart/gnome-keyring-gpg.desktop +++ b/xdg/autostart/gnome-keyring-gpg.desktop @@ -18,4 +18,4 @@ X-GNOME-Autostart-Notify=true X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=gnome-keyring X-GNOME-Bugzilla-Component=general -X-GNOME-Bugzilla-Version=3.10.1 +X-GNOME-Bugzilla-Version=3.12.2 diff --git a/xdg/autostart/gnome-keyring-pkcs11.desktop b/xdg/autostart/gnome-keyring-pkcs11.desktop index 263fcbb3..cf0cb3ee 100644 --- a/xdg/autostart/gnome-keyring-pkcs11.desktop +++ b/xdg/autostart/gnome-keyring-pkcs11.desktop @@ -18,4 +18,4 @@ X-GNOME-Autostart-Notify=true X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=gnome-keyring X-GNOME-Bugzilla-Component=general -X-GNOME-Bugzilla-Version=3.10.1 +X-GNOME-Bugzilla-Version=3.12.2 diff --git a/xdg/autostart/gnome-keyring-secrets.desktop b/xdg/autostart/gnome-keyring-secrets.desktop index f1ca4785..71f504ce 100644 --- a/xdg/autostart/gnome-keyring-secrets.desktop +++ b/xdg/autostart/gnome-keyring-secrets.desktop @@ -18,4 +18,4 @@ X-GNOME-Autostart-Notify=true X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=gnome-keyring X-GNOME-Bugzilla-Component=general -X-GNOME-Bugzilla-Version=3.10.1 +X-GNOME-Bugzilla-Version=3.12.2 diff --git a/xdg/autostart/gnome-keyring-ssh.desktop b/xdg/autostart/gnome-keyring-ssh.desktop index 1ade422e..ec588e63 100644 --- a/xdg/autostart/gnome-keyring-ssh.desktop +++ b/xdg/autostart/gnome-keyring-ssh.desktop @@ -18,4 +18,4 @@ X-GNOME-Autostart-Notify=true X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=gnome-keyring X-GNOME-Bugzilla-Component=general -X-GNOME-Bugzilla-Version=3.10.1 +X-GNOME-Bugzilla-Version=3.12.2 diff --git a/xdg/autostart/tracker-extract.desktop b/xdg/autostart/tracker-extract.desktop new file mode 100644 index 00000000..f6e39037 --- /dev/null +++ b/xdg/autostart/tracker-extract.desktop @@ -0,0 +1,23 @@ +[Desktop Entry] +Name=Tracker Metadata Extractor +Name[de]=Tracker Metadaten-Entdecker +Name[ru]=Экстрактор метаданных +Comment=Extracts metadata from local files +Comment[de]=Liest Metadaten aus lokalen Dateien +Comment[ru]=Извлечь метаданные из локальных файлов +Icon= +Exec=/usr/libexec/tracker-extract +Terminal=false +Type=Application +Categories=Utility; +X-Meego-Priority=Late +X-GNOME-Autostart-enabled=true +X-KDE-autostart-after=panel +X-KDE-StartupNotify=false +X-KDE-UniqueApplet=true +NoDisplay=true +OnlyShowIn=GNOME;KDE;XFCE;X-MEEGO-HS;X-MEEGO-NB;X-IVI;Unity; +X-GNOME-Bugzilla-Bugzilla=GNOME +X-GNOME-Bugzilla-Product=tracker +X-GNOME-Bugzilla-Component=Extractor +X-GNOME-Bugzilla-Version=1.0.2 diff --git a/xdg/autostart/tracker-miner-fs.desktop b/xdg/autostart/tracker-miner-fs.desktop index 31dd6fd0..425385b9 100644 --- a/xdg/autostart/tracker-miner-fs.desktop +++ b/xdg/autostart/tracker-miner-fs.desktop @@ -22,4 +22,4 @@ OnlyShowIn=GNOME;KDE;XFCE;X-MEEGO-HS;X-MEEGO-NB;X-IVI;Unity; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=tracker X-GNOME-Bugzilla-Component=Miners -X-GNOME-Bugzilla-Version=0.16.4 +X-GNOME-Bugzilla-Version=1.0.2 diff --git a/xdg/autostart/tracker-store.desktop b/xdg/autostart/tracker-store.desktop index 5a13722f..afd9b3b1 100644 --- a/xdg/autostart/tracker-store.desktop +++ b/xdg/autostart/tracker-store.desktop @@ -8,7 +8,7 @@ Comment[de]=Verwaltung für Suche und Speicherung in einer Metadaten-Datenbank Comment[en_GB]=Metadata database store and lookup manager Comment[ru]=Хранилище базы метаданных и диспетчер поиска Icon= -Exec=/usr/libexec/tracker-store +Exec=gdbus call -e -d org.freedesktop.DBus -o /org/freedesktop/DBus -m org.freedesktop.DBus.StartServiceByName org.freedesktop.Tracker1 0 Terminal=false Type=Application Categories=Utility; @@ -21,4 +21,4 @@ OnlyShowIn=GNOME;KDE;XFCE;X-MEEGO-HS;X-MEEGO-NB;X-IVI;Unity; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=tracker X-GNOME-Bugzilla-Component=Store -X-GNOME-Bugzilla-Version=0.16.4 +X-GNOME-Bugzilla-Version=1.0.2 diff --git a/xml/catalog b/xml/catalog index 77d48a88..4278714a 100644 --- a/xml/catalog +++ b/xml/catalog @@ -16,7 +16,6 @@ - @@ -30,4 +29,5 @@ +