From: frank Date: Mon, 16 Jan 2012 14:16:16 +0000 (+0100) Subject: committing changes in /etc after emerge run X-Git-Url: https://git.uhu-banane.org/?a=commitdiff_plain;h=5d0b69e6a2b4c259babf770d12ba666d72c62db4;p=config%2Fbruni%2Fetc.git committing changes in /etc after emerge run Package changes: +dev-tex/chktex-1.6.4 --- diff --git a/.etckeeper b/.etckeeper index 2c71de45..4804bd1b 100755 --- a/.etckeeper +++ b/.etckeeper @@ -99,6 +99,7 @@ maybe chmod 0644 './bonobo-activation/bonobo-activation-config.xml' maybe chmod 0755 './ca-certificates' maybe chmod 0644 './ca-certificates.conf' maybe chmod 0755 './ca-certificates/update.d' +maybe chmod 0644 './chktexrc' maybe chmod 0644 './colordiffrc' maybe chmod 0644 './colordiffrc-lightbg' maybe chmod 0755 './conf.d' diff --git a/chktexrc b/chktexrc new file mode 100644 index 00000000..d6f288a6 --- /dev/null +++ b/chktexrc @@ -0,0 +1,678 @@ +## +## ChkTeX, example resource file for ChkTeX. +## Copyright (C) 1995-96 Jens T. Berger Thielemann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +## +## Contact the author at: +## Jens Berger +## Spektrumvn. 4 +## N-0666 Oslo +## Norway +## E-mail: +## + +##################################################################### +# +# Note: The format has changed slightly (again). The { ... } +# syntax does now mean case-sensitive comparing, while [ ... ] means +# case-insensitive comparing of the keywords. Case-insensitive +# comparing of the keywords is only supported on a few of the +# keywords (it's not meaningful in all contexts, and it slows ChkTeX +# down). Keywords supporting this are marked throughout the file. +# +# You may also reset a list by saying "KEYWORD = { ... }"; it will +# then be set equal to the contents of the list you specify. +# +# Comments begin with `#', and continues for the rest of the line. +# Blank lines plus leading and trailing spaces are of course ignored. +# +# The general format of this file is the following: +# +# KEYWORD { item item ...} [ item item ... ] /* Adds items */ +# +# KEYWORD [ item item ...] { item item ... } /* Adds items */ +# +# KEYWORD = item +# +# KEYWORD = { item item ... } /* Clears list before adding */ +# +# KEYWORD = [ item item ... ] /* Clears list before adding */ +# +# This does _not_ mean that you may alternate the forms; certain +# keywords demands a list, other a single value. You thus have to +# look at the examples of their use. +# +# Please also note that if you specify a list-keyword twice, we'll +# concatenate the lists. If you you specify a item-keyword twice, +# we'll kill the previous value. +# +# We are slightly context-sensitive when detecting tokens like "}" +# and "]"; they have to be preceded by a space. This generally makes +# life easier. +# +# Items are separated by spaces. Newlines are considered as spaces, +# but can't be escaped. You may surround items with quotes (`"') to +# easily put spaces into them. +# +# Escape sequences available: +# +# Sequence Resulting character +# ! A space (type `! ', not just a exclamation mark) +# !" " +# !# # +# !! ! +# !{ { +# !} } +# ![ [ +# !] ] +# != = +# !b Backspace +# !n New line +# !r Carriage return +# !t Tab +# !f Form feed +# !xNN NN must be a hexadecimal number (00 - ff), +# _both_ characters must be included. +# !dNNN DDD must be a decimal number (000 - 255), all +# three characters must be included. Unspecified +# results if DDD > 255. +# !NNN DDD must be a octal number (000 - 377), all +# three characters must be included. Unspecified +# results if DDD > 377. +# +# Minor note: As you can see, most of these escape sequences are +# equal to those in C (with some extensions); however, we use ! +# instead of \ as escape character for obvious reasons. +# +# +# Quick summary of keywords follows. Keywords marked with a * accept +# keywords accepting case-insensitive lists. +# +# Abbrev* - A list of abbreviations not automatically catched. +# CenterDots - Commands/characters which should have \cdots in +# between. +# CmdLine - Default commandline options. These will be +# processed before the ones you give on the command +# line. +# HyphDash \ +# NumDash - No. of dashes allowed in different contexts. +# WordDash / +# IJAccent - Commands which puts an accent _over_ their +# argument. +# Italic - Commands immediately turning on italic mode. +# ItalCmd - Commands putting their argument into italic. +# Linker - Commands which should have a non-breaking space in +# front. +# LowDots - Commands/characters which should have \ldots in +# between. +# MathEnvir - Environments which turn on math mode. +# MathRoman - Mathematical operators with LaTeX replacement +# defined. +# NoCharNext - Insists on that certain commands aren't followed by +# certain characters. +# NonItalic - Commands immediately turning off italic mode. +# NotPreSpaced- Commands which should not have a space in front of +# them. +# Primitives - Primitive TeX commands. +# PostLink - Commands which generates a page reference. +# OutFormat - Formats to use for output. See the -f & -v switch +# in the main doc. +# QuoteStyle - Either "Traditional" or "Logical". See main doc, +# warning 38. +# Silent - These commands do not produce any textual output; +# and are thus allowed to have a space after them. +# TabSize - Tab size you are using. +# TeXInputs - Paths to search \input and \include files for. +# UserWarn* - These strings will be searched for throughout the +# text. +# VerbEnvir - Environments which contents should be ignored. +# VerbClear - String we will overwrite unwanted data with. +# WipeArg - Commands (with arguments) which should be ignored +# in the checking. +# + + +##################################################################### +# +# Enter which type of quote-style you are using here. Currently, we +# support the following styles: +# +# Style Example of use +# Traditional "An example," he said, "would be great." +# Logical "An example", he said, "would be great". +# + +QuoteStyle = Logical + +##################################################################### +# +# Enter here what interval you have between your tabs. Only regular +# intervals are supported. +# + +TabSize = 8 + +##################################################################### +# +# Here, you can put default commandline options; most users would for +# instance like to put -v2 here. +# + +CmdLine +{ + +} + +##################################################################### +# +# These patterns will be searched for through the text; no matter +# whether they appear as normal text, commands or whatever. +# Currently case-sensitive. +# +# I usually define a special command like this: +# +# \def\unknown{\large\bf??} +# +# which I use whenever there is some information I don't have at the +# moment of writing. Thus, it makes sense to search for it. +# +# You should be able to develop your own uses for this. +# + +UserWarn +{ + + \unknown +### +# +# Another example; one should write \chktex or Chk\TeX - never ChkTeX. +# +### + + ChkTeX +} +[ + +### +# +# You may put case-insensitive patterns here. +# +### + +] + +##################################################################### +# +# Here you can list the path of where ChkTeX should look for files it +# \inputs. The // postfix is now supported; if you append a double +# path-separator we'll recursively search that directory directories. +# MS-DOS users must append \\ instead, e.g. "C:\EMTEX\\". +# +# If you under either MS-DOS or UNIX wish to search an entire +# partition or the complete directory tree, you must use *three* +# slashes, e.g. "c:\\\" or "///". This may be considered to be a bug. +# +# By default, we'll search the current directory (not recursively, +# put "//" in the list for this); any paths specified below will be +# searched in addition to this. +# + +TeXInputs +{ + +} + +##################################################################### +# +# Here you may specify more outputformats for use with the -v option, +# it simply indexes into this list. Remember to use ! instead of \, +# though. +# +# For explanation of how % fields expand; look at ChkTeX.{dvi,ps}. +# +# We will by default select entry number _two_ in this list (we count +# from 0), and -v without any parameter selects entry number _three_. +# + +OutFormat +{ + +# -v0; silent mode +%f%b%l%b%c%b%n%b%m!n + +# -v1; normal mode +"%k %n in %f line %l: %m!n%r%s%t!n%u!n" + +# -v2; fancy mode +"%k %n in %f line %l: %m!n%r%i%s%I%t!n!n" + +# -v3; lacheck mode +"!"%f!", line %l: %m!n" + +# -v4; verbose lacheck mode +"!"%f!", line %l: %m!n%r%s%t!n%u!n" + +# -v5; no line number, ease auto-test +"%k %n in %f: %m!n%r%s%t!n%u!n" + +} + + + +##################################################################### +# +# These commands should be ignored when detecting whether a command +# is ended by a space. +# + +Silent +{ + \rm \em \bf \it \sl \sf \sc \tt \selectfont + \rmfamily \sffamily \ttfamily \mdseries \bfseries + \slshape \scshape \relax + \vskip \pagebreak \nopagebreak + + \textrm \textem \textbf \textit \textsl \textsf \textsc \texttt + + \clearpage \ddots \dotfill \flushbottom \fussy \indent \linebreak + \onecolumn \pagebreak \pushtabs \poptabs \scriptsize \sloppy + \twocolumn \vdots + \today \kill \newline \thicklines \thinlines + + \columnsep \space \item \tiny \footnotesize \small \normalsize + \normal \large \Large \LARGE \huge \Huge \printindex + + \newpage \listoffigures \listoftables \tableofcontents + \maketitle \makeindex + + \hline \hrule \vrule + + \centering + + \bigskip \medskip \smallskip + + \noindent \expandafter + + \makeatletter \makeatother + + \columnseprule + + \textwidth \textheight \hsize \vsize + + \if \fi + + \csname \endcsname + + \z@ \p@ \@warning \typeout + + \dots \ldots \input \endinput \nextline \leavevmode \cdots +- \appendix \listfiles \and \quad + \vfill \vfil \hfill \hfil \topmargin \oddsidemargin + \frenchspacing \nonfrenchspacing + \begingroup \endgroup \par + + \vrefwarning \upshape \headheight \headsep \hoffset \voffset + \cdot \qquad + \left \right +} + +##################################################################### +# +# Here, you can specify the length of various dashes. We sort the +# dash according to which type of characters that are on the left and +# right of of it. We are only conclusive if they are the same. +# +# We associate as follows: +# +# Name Type of character on each side +# HyphDash Alphabetic (foo-bar) +# NumDash Numeric (2--3) +# WordDash Space (like this --- see?) +# +# Below you specify how many dashes which are legal in each case. We +# define 0 as an magic constant which always generates an error. You +# may specify more than one legal dash-length. +# +# Let's look at an example. You use the following dash-syntax: +# +# foo-bar +# 2--3 +# like this---see? +# +# +# HYPHDASH { 1 3 } # Either a hyphen, or inter-word +# NUMDASH { 2 } # Between words +# WORDDASH { 0 } # We never use this +# + +HyphDash +{ + 1 3 +} + +NumDash +{ + 2 +} + +WordDash +{ + 3 +} + +##################################################################### +# +# This keyword indicates commands which argument isn't LaTeX code, +# and which thus should be ignored. +# +# After the command, you may place arguments that you wish that +# should be wiped in the process; use [] for optional arguments, {} +# for required ones and * if the command supports an alternative +# variant. These should be separated from the command with a colon. +# +# For instance, if you would like to wipe the \newcommand command, +# you would declare it as \newcommand:*[][]{} +# +# These commands may be "executed" before they're wiped, so you will +# typically also wish to list filehandling commands and similar here. +# + +WipeArg +{ + \label:{} \ref:{} \vref:{} \pageref:{} \index:{} \cite:[]{} + \input:{} \verbatiminput:[]{} \listinginput:[]{}{} + \verbatimtabinput:[]{} \include:{} \includeonly:{} + \bibitem:[]{} +} + +##################################################################### +# +# These environments contains material which will be typeset as +# mathematics by LaTeX. This turns on/off some warnings. +# +# We will automagically append a * to each keyword. +# + +MathEnvir +{ + displaymath math eqnarray array equation + align alignat gather flalign multline +} + +##################################################################### +# +# These environments contains material which contents should be +# ignored. +# +# We will automagically append a * to each keyword. +# + +VerbEnvir +{ + verbatim comment listing verbatimtab rawhtml errexam picture texdraw +} + +##################################################################### +# +# ChkTeX does automagically catch most abbreviations; the ones we +# need to list here, are those which are most likely to be followed +# by a word with an upper-case letter (that is not the beginning of a +# new sentence). +# +# The case-insensitive abbreviations are not really case-insensitive, +# it seems to be more practical to only let the first character be +# case-insensitive, while the remaining are case-sensitive. +# +# To speed up the searching process somewhat, we require that these +# end in a `.', this should not be a problem. +# +# Much of this work (both the abbreviations below, and the regexps +# necessary to catch the remaining automatically) have been provided +# by Russ Bubley, . +# + + +Abbrev +{ +# Ordinals +1st. 2nd. 3rd. 4th. +# Titles +Mr. Mrs. Miss. Ms. Dr. Prof. St. + +# +# Days +# Mon. Tue. Wed. Thu. Fri. Sat. Sun. +# +# Months +# Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct. Nov. Dec. +# +# Letters +# Kt. Jr. +# +# Corporate +# Co. Ltd. +# +# Addresses +# Rd. Dr. St. Ave. Cres. Gdns. Sq. Circ. Terr. Pl. Arc. La. Clo. Ho. Est. Gn. +# +# Misc. +# oe. pbab. ps. rsvp. Tx. +} +[ +### +# +# The first letter is case-insensitive in the abbrevs in this +# list. Due to the nature of the checking algorithm used for +# this, entries consisting of only one character will be +# silently ignored. +# +## + +# Latin +# cf. "et al." etc. qed. qv. viz. +# +# Corporate +# inc. plc. +# +# Misc +# fax. pcs. qty. tel. misc. +] + +##################################################################### +# +# Commands which accent characters, meaning that \i or \j (\imath and +# \jmath in mathmode) should be used instead of `i' and `j' +# + +IJAccent +{ + \hat \check \breve \acute \grave \tilde \bar \vec \dot \ddot + + \' \` \^ \" \~ \= \. \u \v \H \t + +### +# +# The remaining accent commands (\c,\d,\b) put their accent _under_ +# the character, not above, and should thus be used with normal i's +# and j's. +# +### + +} + +##################################################################### +# +# Commands which, when the group is terminated, needs italic +# correction. +# + +Italic +{ + \it \em \sl + \itshape \slshape +} + +##################################################################### +# +# Commands which makes the font non-italic. +# + +NonItalic +{ + \bf \rm \sf \tt \sc + \upshape +} + +##################################################################### +# +# Commands which puts their argument into italic (and thus possibly +# needs italic correction in the end). +# +# This is currently empty, since \textit, \textsl and \emph do that +# automatically. +# + +ItalCmd +{ +} + +##################################################################### +# +# These commands all have in common that a pagebreak right in front +# of them is highly undesirable; thus there should be no space in +# front of them. +# + +PostLink +{ + \index \label +} + +##################################################################### +# +# These commands should not have a space in front of them for various +# reasons. I.e. much the same as POSTLINK, but produces another +# warning. +# + +NotPreSpaced +{ + \footnote \footnotemark \/ +} + +##################################################################### +# +# The commands listed here, should be prepended with a `~', as in +# "look in table~\ref{foo}", to avoid the references being split +# across lines. +# + +Linker +{ + \ref \vref \pageref \cite +} + +##################################################################### +# +# Commands/characters which should have \cdots in between, e.g. +# $1+2+3+\cdots+n$. +# + +CenterDots +{ + = + - \cdot \div & \times \geq \leq < > +} + +##################################################################### +# +# Commands/characters which should have \ldots in between, e.g. +# $1,2,3,\ldots,n$. +# + +LowDots +{ + . , ; +} + +##################################################################### +# +# In maths mode, there are certain aliases for mathematical operators +# like sin, cos, etc. Ignore the leading backslash in the commands, +# and so forth. You should list these below. +# + +MathRoman +{ + log lg ln lim limsup liminf sin arcsin sinh cos arccos cosh tan + arctan tanh cot coth sec csc max min sup inf arg ker dim hom det + exp Pr gcd deg bmod pmod mod +} + +##################################################################### +# +# These TeX commands have become unnecessary, as there are LaTeX cmds +# that does the same. Purists should thus avoid these in their code. +# +# (These are a spell-corrected version of those lacheck uses). +# + +Primitives +{ + \above \advance \catcode \chardef \closein \closeout \copy \count + \countdef \cr \crcr \csname \delcode \dimendef \dimen \divide + \expandafter \font \hskip \vskip \openout +} + +##################################################################### +# +# Format: \command:characters +# +# We'll emit a warning if any of characters are found after the +# command. +# + +NoCharNext +{ + \left:{}$ \right:{}$ +} + +##################################################################### +# +# We're killing \verb@...@ commands and the arguments of the commands +# listed above in WIPEARG by overwriting them with a string or a +# single character. +# +# This should not contain an alphabetic character (in case the user +# writes (\foo\verb@bar@), neither should it contain be one of LaTeX' +# reserved characters (`#$%&~_^\{}'), or any parenthesis character +# ('()[]{}'). If possible, don't use a punctuation character, +# either, or any spacing character. +# +# The asterix is also unsuitable, as some commands behave in another +# way if they are postpended with an asterix. Which more or less +# leaves us with the pipe. +# +# Please note that this may also be a _string_, which will be +# repeated until the proper length is reached. +# + +VerbClear = "|" + +# +# All for now - have fun. +# +##################################################################### +