From: Frank Brehm Date: Sun, 11 Oct 2015 18:11:46 +0000 (+0200) Subject: Current state X-Git-Url: https://git.uhu-banane.org/?a=commitdiff_plain;h=589bb22301e7e05f0aa2eb9d78c2790cc8befffa;p=config%2Fbruni%2Fetc.git Current state --- diff --git a/.java/deployment/deployment.properties b/.java/deployment/deployment.properties new file mode 100644 index 00000000..74571d74 --- /dev/null +++ b/.java/deployment/deployment.properties @@ -0,0 +1 @@ +deployment.jre.dir=/etc/java-config-2/current-icedtea-web-vm diff --git a/ImageMagick-6/delegates.xml b/ImageMagick-6/delegates.xml index f838a0e5..1bc935e6 100644 --- a/ImageMagick-6/delegates.xml +++ b/ImageMagick-6/delegates.xml @@ -100,7 +100,7 @@ - + @@ -113,7 +113,7 @@ - + diff --git a/at-spi2/accessibility.conf b/at-spi2/accessibility.conf index b9367d01..fc7d0f4e 100644 --- a/at-spi2/accessibility.conf +++ b/at-spi2/accessibility.conf @@ -3,8 +3,7 @@ accessibility - - +/usr/share/dbus-1/accessibility-services EXTERNAL unix:tmpdir=/tmp diff --git a/bluetooth/bluetooth.conf b/bluetooth/bluetooth.conf index 0ae606ee..d32eea4d 100644 --- a/bluetooth/bluetooth.conf +++ b/bluetooth/bluetooth.conf @@ -18,7 +18,10 @@ + + + diff --git a/bluetooth/main.conf b/bluetooth/main.conf index d4d6ab09..11db3831 100644 --- a/bluetooth/main.conf +++ b/bluetooth/main.conf @@ -52,6 +52,20 @@ # Possible values: "dual", "bredr", "le" #ControllerMode = dual +# Enables Multi Profile Specification support. This allows to specify if +# system supports only Multiple Profiles Single Device (MPSD) configuration +# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple +# Devices (MPMD) configurations. +# Possible values: "off", "single", "multiple" +#MultiProfile = off + +# Permanently enables the Fast Connectable setting for adapters that +# support it. When enabled other devices can connect faster to us, +# however the tradeoff is increased power consumptions. This feature +# will fully work only on kernel version 4.1 and newer. Defaults to +# 'false'. +#FastConnectable = false + #[Policy] # # The ReconnectUUIDs defines the set of remote services that should try @@ -59,4 +73,14 @@ # timeout). The policy plugin should contain a sane set of values by # default, but this list can be overridden here. By setting the list to # empty the reconnection feature gets disabled. -#ReconnectUUIDs= +#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb, 0000111f-0000-1000-8000-00805f9b34fb, 0000110a-0000-1000-8000-00805f9b34fb + +# ReconnectAttempts define the number of attempts to reconnect after a link +# lost. Setting the value to 0 disables reconnecting feature. +#ReconnectAttempts=7 + +# ReconnectIntervals define the set of intervals in seconds to use in between +# attempts. +# If the number of attempts defined in ReconnectAttempts is bigger than the +# set of intervals the last interval is repeated until the last attempt. +#ReconnectIntervals=1, 2, 4, 8, 16, 32, 64 diff --git a/conf.d/ebtables b/conf.d/ebtables new file mode 100644 index 00000000..645b26ed --- /dev/null +++ b/conf.d/ebtables @@ -0,0 +1,11 @@ +# /etc/conf.d/ebtables + +# Location in which ebtables initscript will save set rules on +# service shutdown +EBTABLES_SAVE="/var/lib/ebtables/rules-save" + +# Options to pass to ebtables-save and ebtables-restore +SAVE_RESTORE_OPTIONS="" + +# Save state on stopping ebtables +SAVE_ON_STOP="yes" diff --git a/conf.d/pydoc-2.7 b/conf.d/pydoc-2.7 index 50633cac..b5af52d6 100644 --- a/conf.d/pydoc-2.7 +++ b/conf.d/pydoc-2.7 @@ -1,5 +1,5 @@ # /etc/init.d/pydoc.conf -# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.conf,v 1.3 2011/10/27 13:56:55 neurogeek Exp $ +# $Id$ # This file contains the configuration for pydoc's internal webserver. diff --git a/conf.d/pydoc-3.4 b/conf.d/pydoc-3.4 index 7beefff8..e5e11495 100644 --- a/conf.d/pydoc-3.4 +++ b/conf.d/pydoc-3.4 @@ -1,5 +1,5 @@ # /etc/init.d/pydoc.conf -# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.conf,v 1.3 2011/10/27 13:56:55 neurogeek Exp $ +# $Id$ # This file contains the configuration for pydoc's internal webserver. diff --git a/conf.d/vde b/conf.d/vde new file mode 100644 index 00000000..d8794537 --- /dev/null +++ b/conf.d/vde @@ -0,0 +1,10 @@ +# load the tun module +VDE_MODPROBE_TUN="yes" +# virtual tap networking device to be used for vde +VDE_TAP="tap0" +# mode and group for the socket +VDE_SOCK_CHMOD="770" +VDE_SOCK_CHOWN=":qemu" + +# This is the actual options string passed to VDE. Change this at your own risk. +VDE_OPTS="-tap ${VDE_TAP} -daemon" diff --git a/config-archive/etc/libvirt/libvirtd.conf b/config-archive/etc/libvirt/libvirtd.conf new file mode 100644 index 00000000..a0f0bb4b --- /dev/null +++ b/config-archive/etc/libvirt/libvirtd.conf @@ -0,0 +1,434 @@ +# Master libvirt daemon configuration file +# +# For further information consult http://libvirt.org/format.html +# +# NOTE: the tests/daemon-conf regression test script requires +# that each "PARAMETER = VALUE" line in this file have the parameter +# name just after a leading "#". + +################################################################# +# +# Network connectivity controls +# + +# Flag listening for secure TLS connections on the public TCP/IP port. +# NB, must pass the --listen flag to the libvirtd process for this to +# have any effect. +# +# It is necessary to setup a CA and issue server certificates before +# using this capability. +# +# This is enabled by default, uncomment this to disable it +#listen_tls = 0 + +# Listen for unencrypted TCP connections on the public TCP/IP port. +# NB, must pass the --listen flag to the libvirtd process for this to +# have any effect. +# +# Using the TCP socket requires SASL authentication by default. Only +# SASL mechanisms which support data encryption are allowed. This is +# DIGEST_MD5 and GSSAPI (Kerberos5) +# +# This is disabled by default, uncomment this to enable it. +listen_tcp = 1 + + + +# Override the port for accepting secure TLS connections +# This can be a port number, or service name +# +#tls_port = "16514" + +# Override the port for accepting insecure TCP connections +# This can be a port number, or service name +# +tcp_port = "1611" + + +# Override the default configuration which binds to all network +# interfaces. This can be a numeric IPv4/6 address, or hostname +# +# If the libvirtd service is started in parallel with network +# startup (e.g. with systemd), binding to addresses other than +# the wildcards (0.0.0.0/::) might not be available yet. +# +#listen_addr = "192.168.0.1" +listen_addr = "127.0.0.1" + + +# Flag toggling mDNS advertizement of the libvirt service. +# +# Alternatively can disable for all services on a host by +# stopping the Avahi daemon +# +# This is disabled by default, uncomment this to enable it +#mdns_adv = 1 + +# Override the default mDNS advertizement name. This must be +# unique on the immediate broadcast network. +# +# The default is "Virtualization Host HOSTNAME", where HOSTNAME +# is substituted for the short hostname of the machine (without domain) +# +#mdns_name = "Virtualization Host Joe Demo" + + +################################################################# +# +# UNIX socket access controls +# + +# Beware that if you are changing *any* of these options, and you use +# socket activation with systemd, you need to adjust the settings in +# the libvirtd.socket file as well since it could impose a security +# risk if you rely on file permission checking only. + +# Set the UNIX domain socket group ownership. This can be used to +# allow a 'trusted' set of users access to management capabilities +# without becoming root. +# +# This is restricted to 'root' by default. +unix_sock_group = "libvirt" + +# Set the UNIX socket permissions for the R/O socket. This is used +# for monitoring VM status only +# +# Default allows any user. If setting group ownership, you may want to +# restrict this too. +#unix_sock_ro_perms = "0777" + +# Set the UNIX socket permissions for the R/W socket. This is used +# for full management of VMs +# +# Default allows only root. If PolicyKit is enabled on the socket, +# the default will change to allow everyone (eg, 0777) +# +# If not using PolicyKit and setting group ownership for access +# control, then you may want to relax this too. +#unix_sock_rw_perms = "0770" + +# Set the name of the directory in which sockets will be found/created. +#unix_sock_dir = "/var/run/libvirt" + +################################################################# +# +# Authentication. +# +# - none: do not perform auth checks. If you can connect to the +# socket you are allowed. This is suitable if there are +# restrictions on connecting to the socket (eg, UNIX +# socket permissions), or if there is a lower layer in +# the network providing auth (eg, TLS/x509 certificates) +# +# - sasl: use SASL infrastructure. The actual auth scheme is then +# controlled from /etc/sasl2/libvirt.conf. For the TCP +# socket only GSSAPI & DIGEST-MD5 mechanisms will be used. +# For non-TCP or TLS sockets, any scheme is allowed. +# +# - polkit: use PolicyKit to authenticate. This is only suitable +# for use on the UNIX sockets. The default policy will +# require a user to supply their own password to gain +# full read/write access (aka sudo like), while anyone +# is allowed read/only access. +# +# Set an authentication scheme for UNIX read-only sockets +# By default socket permissions allow anyone to connect +# +# To restrict monitoring of domains you may wish to enable +# an authentication mechanism here +#auth_unix_ro = "none" + +# Set an authentication scheme for UNIX read-write sockets +# By default socket permissions only allow root. If PolicyKit +# support was compiled into libvirt, the default will be to +# use 'polkit' auth. +# +# If the unix_sock_rw_perms are changed you may wish to enable +# an authentication mechanism here +#auth_unix_rw = "none" +auth_unix_rw = "polkit" +#auth_unix_rw = "sasl" + +# Change the authentication scheme for TCP sockets. +# +# If you don't enable SASL, then all TCP traffic is cleartext. +# Don't do this outside of a dev/test scenario. For real world +# use, always enable SASL and use the GSSAPI or DIGEST-MD5 +# mechanism in /etc/sasl2/libvirt.conf +#auth_tcp = "sasl" + +# Change the authentication scheme for TLS sockets. +# +# TLS sockets already have encryption provided by the TLS +# layer, and limited authentication is done by certificates +# +# It is possible to make use of any SASL authentication +# mechanism as well, by using 'sasl' for this option +#auth_tls = "none" + + +# Change the API access control scheme +# +# By default an authenticated user is allowed access +# to all APIs. Access drivers can place restrictions +# on this. By default the 'nop' driver is enabled, +# meaning no access control checks are done once a +# client has authenticated with libvirtd +# +#access_drivers = [ "polkit" ] + +################################################################# +# +# TLS x509 certificate configuration +# + + +# Override the default server key file path +# +#key_file = "/etc/pki/libvirt/private/serverkey.pem" + +# Override the default server certificate file path +# +#cert_file = "/etc/pki/libvirt/servercert.pem" + +# Override the default CA certificate path +# +#ca_file = "/etc/pki/CA/cacert.pem" + +# Specify a certificate revocation list. +# +# Defaults to not using a CRL, uncomment to enable it +#crl_file = "/etc/pki/CA/crl.pem" + + + +################################################################# +# +# Authorization controls +# + + +# Flag to disable verification of our own server certificates +# +# When libvirtd starts it performs some sanity checks against +# its own certificates. +# +# Default is to always run sanity checks. Uncommenting this +# will disable sanity checks which is not a good idea +#tls_no_sanity_certificate = 1 + +# Flag to disable verification of client certificates +# +# Client certificate verification is the primary authentication mechanism. +# Any client which does not present a certificate signed by the CA +# will be rejected. +# +# Default is to always verify. Uncommenting this will disable +# verification - make sure an IP whitelist is set +#tls_no_verify_certificate = 1 + + +# A whitelist of allowed x509 Distinguished Names +# This list may contain wildcards such as +# +# "C=GB,ST=London,L=London,O=Red Hat,CN=*" +# +# See the POSIX fnmatch function for the format of the wildcards. +# +# NB If this is an empty list, no client can connect, so comment out +# entirely rather than using empty list to disable these checks +# +# By default, no DN's are checked +#tls_allowed_dn_list = ["DN1", "DN2"] + + +# A whitelist of allowed SASL usernames. The format for usernames +# depends on the SASL authentication mechanism. Kerberos usernames +# look like username@REALM +# +# This list may contain wildcards such as +# +# "*@EXAMPLE.COM" +# +# See the POSIX fnmatch function for the format of the wildcards. +# +# NB If this is an empty list, no client can connect, so comment out +# entirely rather than using empty list to disable these checks +# +# By default, no Username's are checked +#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ] + + + +################################################################# +# +# Processing controls +# + +# The maximum number of concurrent client connections to allow +# over all sockets combined. +#max_clients = 5000 + +# The maximum length of queue of connections waiting to be +# accepted by the daemon. Note, that some protocols supporting +# retransmission may obey this so that a later reattempt at +# connection succeeds. +#max_queued_clients = 1000 + +# The maximum length of queue of accepted but not yet +# authenticated clients. The default value is zero, meaning +# the feature is disabled. +#max_anonymous_clients = 20 + +# The minimum limit sets the number of workers to start up +# initially. If the number of active clients exceeds this, +# then more threads are spawned, up to max_workers limit. +# Typically you'd want max_workers to equal maximum number +# of clients allowed +#min_workers = 5 +#max_workers = 20 + + +# The number of priority workers. If all workers from above +# pool are stuck, some calls marked as high priority +# (notably domainDestroy) can be executed in this pool. +#prio_workers = 5 + +# Total global limit on concurrent RPC calls. Should be +# at least as large as max_workers. Beyond this, RPC requests +# will be read into memory and queued. This directly impacts +# memory usage, currently each request requires 256 KB of +# memory. So by default up to 5 MB of memory is used +# +# XXX this isn't actually enforced yet, only the per-client +# limit is used so far +#max_requests = 20 + +# Limit on concurrent requests from a single client +# connection. To avoid one client monopolizing the server +# this should be a small fraction of the global max_requests +# and max_workers parameter +#max_client_requests = 5 + +################################################################# +# +# Logging controls +# + +# Logging level: 4 errors, 3 warnings, 2 information, 1 debug +# basically 1 will log everything possible +# Note: Journald may employ rate limiting of the messages logged +# and thus lock up the libvirt daemon. To use the debug level with +# journald you have to specify it explicitly in 'log_outputs', otherwise +# only information level messages will be logged. +log_level = 2 + +# Logging filters: +# A filter allows to select a different logging level for a given category +# of logs +# The format for a filter is one of: +# x:name +# x:+name +# where name is a string which is matched against source file name, +# e.g., "remote", "qemu", or "util/json", the optional "+" prefix +# tells libvirt to log stack trace for each message matching name, +# and x is the minimal level where matching messages should be logged: +# 1: DEBUG +# 2: INFO +# 3: WARNING +# 4: ERROR +# +# Multiple filters can be defined in a single @filters, they just need to be +# separated by spaces. +# +# e.g. to only get warning or errors from the remote layer and only errors +# from the event layer: +#log_filters="3:remote 4:event" + +# Logging outputs: +# An output is one of the places to save logging information +# The format for an output can be: +# x:stderr +# output goes to stderr +# x:syslog:name +# use syslog for the output and use the given name as the ident +# x:file:file_path +# output to a file, with the given filepath +# x:journald +# output to journald logging system +# In all case the x prefix is the minimal level, acting as a filter +# 1: DEBUG +# 2: INFO +# 3: WARNING +# 4: ERROR +# +# Multiple outputs can be defined, they just need to be separated by spaces. +# e.g. to log all warnings and errors to syslog under the libvirtd ident: +#log_outputs="3:syslog:libvirtd" +log_outputs="2:syslog:libvirtd" +# + +# Log debug buffer size: +# +# This configuration option is no longer used, since the global +# log buffer functionality has been removed. Please configure +# suitable log_outputs/log_filters settings to obtain logs. +#log_buffer_size = 64 + + +################################################################## +# +# Auditing +# +# This setting allows usage of the auditing subsystem to be altered: +# +# audit_level == 0 -> disable all auditing +# audit_level == 1 -> enable auditing, only if enabled on host (default) +# audit_level == 2 -> enable auditing, and exit if disabled on host +# +#audit_level = 2 +# +# If set to 1, then audit messages will also be sent +# via libvirt logging infrastructure. Defaults to 0 +# +#audit_logging = 1 + +################################################################### +# UUID of the host: +# Provide the UUID of the host here in case the command +# 'dmidecode -s system-uuid' does not provide a valid uuid. In case +# 'dmidecode' does not provide a valid UUID and none is provided here, a +# temporary UUID will be generated. +# Keep the format of the example UUID below. UUID must not have all digits +# be the same. + +# NB This default all-zeros UUID will not work. Replace +# it with the output of the 'uuidgen' command and then +# uncomment this entry +#host_uuid = "00000000-0000-0000-0000-000000000000" +host_uuid = "56a41aab-92b8-4840-b9ef-39a41c8d6b01" + +################################################################### +# Keepalive protocol: +# This allows libvirtd to detect broken client connections or even +# dead clients. A keepalive message is sent to a client after +# keepalive_interval seconds of inactivity to check if the client is +# still responding; keepalive_count is a maximum number of keepalive +# messages that are allowed to be sent to the client without getting +# any response before the connection is considered broken. In other +# words, the connection is automatically closed approximately after +# keepalive_interval * (keepalive_count + 1) seconds since the last +# message received from the client. If keepalive_interval is set to +# -1, libvirtd will never send keepalive requests; however clients +# can still send them and the daemon will send responses. When +# keepalive_count is set to 0, connections will be automatically +# closed after keepalive_interval seconds of inactivity without +# sending any keepalive messages. +# +#keepalive_interval = 5 +#keepalive_count = 5 +# +# If set to 1, libvirtd will refuse to talk to clients that do not +# support keepalive protocol. Defaults to 0. +# +#keepalive_required = 1 diff --git a/config-archive/etc/libvirt/libvirtd.conf.dist b/config-archive/etc/libvirt/libvirtd.conf.dist new file mode 100644 index 00000000..ac06cdd7 --- /dev/null +++ b/config-archive/etc/libvirt/libvirtd.conf.dist @@ -0,0 +1,453 @@ +# Master libvirt daemon configuration file +# +# For further information consult http://libvirt.org/format.html +# +# NOTE: the tests/daemon-conf regression test script requires +# that each "PARAMETER = VALUE" line in this file have the parameter +# name just after a leading "#". + +################################################################# +# +# Network connectivity controls +# + +# Flag listening for secure TLS connections on the public TCP/IP port. +# NB, must pass the --listen flag to the libvirtd process for this to +# have any effect. +# +# It is necessary to setup a CA and issue server certificates before +# using this capability. +# +# This is enabled by default, uncomment this to disable it +#listen_tls = 0 + +# Listen for unencrypted TCP connections on the public TCP/IP port. +# NB, must pass the --listen flag to the libvirtd process for this to +# have any effect. +# +# Using the TCP socket requires SASL authentication by default. Only +# SASL mechanisms which support data encryption are allowed. This is +# DIGEST_MD5 and GSSAPI (Kerberos5) +# +# This is disabled by default, uncomment this to enable it. +#listen_tcp = 1 + + + +# Override the port for accepting secure TLS connections +# This can be a port number, or service name +# +#tls_port = "16514" + +# Override the port for accepting insecure TCP connections +# This can be a port number, or service name +# +#tcp_port = "16509" + + +# Override the default configuration which binds to all network +# interfaces. This can be a numeric IPv4/6 address, or hostname +# +# If the libvirtd service is started in parallel with network +# startup (e.g. with systemd), binding to addresses other than +# the wildcards (0.0.0.0/::) might not be available yet. +# +#listen_addr = "192.168.0.1" + + +# Flag toggling mDNS advertizement of the libvirt service. +# +# Alternatively can disable for all services on a host by +# stopping the Avahi daemon +# +# This is disabled by default, uncomment this to enable it +#mdns_adv = 1 + +# Override the default mDNS advertizement name. This must be +# unique on the immediate broadcast network. +# +# The default is "Virtualization Host HOSTNAME", where HOSTNAME +# is substituted for the short hostname of the machine (without domain) +# +#mdns_name = "Virtualization Host Joe Demo" + + +################################################################# +# +# UNIX socket access controls +# + +# Beware that if you are changing *any* of these options, and you use +# socket activation with systemd, you need to adjust the settings in +# the libvirtd.socket file as well since it could impose a security +# risk if you rely on file permission checking only. + +# Set the UNIX domain socket group ownership. This can be used to +# allow a 'trusted' set of users access to management capabilities +# without becoming root. +# +# This is restricted to 'root' by default. +#unix_sock_group = "libvirt" + +# Set the UNIX socket permissions for the R/O socket. This is used +# for monitoring VM status only +# +# Default allows any user. If setting group ownership, you may want to +# restrict this too. +#unix_sock_ro_perms = "0777" + +# Set the UNIX socket permissions for the R/W socket. This is used +# for full management of VMs +# +# Default allows only root. If PolicyKit is enabled on the socket, +# the default will change to allow everyone (eg, 0777) +# +# If not using PolicyKit and setting group ownership for access +# control, then you may want to relax this too. +#unix_sock_rw_perms = "0770" + +# Set the UNIX socket permissions for the admin interface socket. +# +# Default allows only owner (root), do not change it unless you are +# sure to whom you are exposing the access to. +#unix_sock_admin_perms = "0700" + +# Set the name of the directory in which sockets will be found/created. +#unix_sock_dir = "/var/run/libvirt" + + + +################################################################# +# +# Authentication. +# +# - none: do not perform auth checks. If you can connect to the +# socket you are allowed. This is suitable if there are +# restrictions on connecting to the socket (eg, UNIX +# socket permissions), or if there is a lower layer in +# the network providing auth (eg, TLS/x509 certificates) +# +# - sasl: use SASL infrastructure. The actual auth scheme is then +# controlled from /etc/sasl2/libvirt.conf. For the TCP +# socket only GSSAPI & DIGEST-MD5 mechanisms will be used. +# For non-TCP or TLS sockets, any scheme is allowed. +# +# - polkit: use PolicyKit to authenticate. This is only suitable +# for use on the UNIX sockets. The default policy will +# require a user to supply their own password to gain +# full read/write access (aka sudo like), while anyone +# is allowed read/only access. +# +# Set an authentication scheme for UNIX read-only sockets +# By default socket permissions allow anyone to connect +# +# To restrict monitoring of domains you may wish to enable +# an authentication mechanism here +#auth_unix_ro = "none" + +# Set an authentication scheme for UNIX read-write sockets +# By default socket permissions only allow root. If PolicyKit +# support was compiled into libvirt, the default will be to +# use 'polkit' auth. +# +# If the unix_sock_rw_perms are changed you may wish to enable +# an authentication mechanism here +#auth_unix_rw = "none" + +# Change the authentication scheme for TCP sockets. +# +# If you don't enable SASL, then all TCP traffic is cleartext. +# Don't do this outside of a dev/test scenario. For real world +# use, always enable SASL and use the GSSAPI or DIGEST-MD5 +# mechanism in /etc/sasl2/libvirt.conf +#auth_tcp = "sasl" + +# Change the authentication scheme for TLS sockets. +# +# TLS sockets already have encryption provided by the TLS +# layer, and limited authentication is done by certificates +# +# It is possible to make use of any SASL authentication +# mechanism as well, by using 'sasl' for this option +#auth_tls = "none" + + +# Change the API access control scheme +# +# By default an authenticated user is allowed access +# to all APIs. Access drivers can place restrictions +# on this. By default the 'nop' driver is enabled, +# meaning no access control checks are done once a +# client has authenticated with libvirtd +# +#access_drivers = [ "polkit" ] + +################################################################# +# +# TLS x509 certificate configuration +# + + +# Override the default server key file path +# +#key_file = "/etc/pki/libvirt/private/serverkey.pem" + +# Override the default server certificate file path +# +#cert_file = "/etc/pki/libvirt/servercert.pem" + +# Override the default CA certificate path +# +#ca_file = "/etc/pki/CA/cacert.pem" + +# Specify a certificate revocation list. +# +# Defaults to not using a CRL, uncomment to enable it +#crl_file = "/etc/pki/CA/crl.pem" + + + +################################################################# +# +# Authorization controls +# + + +# Flag to disable verification of our own server certificates +# +# When libvirtd starts it performs some sanity checks against +# its own certificates. +# +# Default is to always run sanity checks. Uncommenting this +# will disable sanity checks which is not a good idea +#tls_no_sanity_certificate = 1 + +# Flag to disable verification of client certificates +# +# Client certificate verification is the primary authentication mechanism. +# Any client which does not present a certificate signed by the CA +# will be rejected. +# +# Default is to always verify. Uncommenting this will disable +# verification - make sure an IP whitelist is set +#tls_no_verify_certificate = 1 + + +# A whitelist of allowed x509 Distinguished Names +# This list may contain wildcards such as +# +# "C=GB,ST=London,L=London,O=Red Hat,CN=*" +# +# See the POSIX fnmatch function for the format of the wildcards. +# +# NB If this is an empty list, no client can connect, so comment out +# entirely rather than using empty list to disable these checks +# +# By default, no DN's are checked +#tls_allowed_dn_list = ["DN1", "DN2"] + + +# A whitelist of allowed SASL usernames. The format for usernames +# depends on the SASL authentication mechanism. Kerberos usernames +# look like username@REALM +# +# This list may contain wildcards such as +# +# "*@EXAMPLE.COM" +# +# See the POSIX fnmatch function for the format of the wildcards. +# +# NB If this is an empty list, no client can connect, so comment out +# entirely rather than using empty list to disable these checks +# +# By default, no Username's are checked +#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ] + + + +################################################################# +# +# Processing controls +# + +# The maximum number of concurrent client connections to allow +# over all sockets combined. +#max_clients = 5000 + +# The maximum length of queue of connections waiting to be +# accepted by the daemon. Note, that some protocols supporting +# retransmission may obey this so that a later reattempt at +# connection succeeds. +#max_queued_clients = 1000 + +# The maximum length of queue of accepted but not yet +# authenticated clients. The default value is zero, meaning +# the feature is disabled. +#max_anonymous_clients = 20 + +# The minimum limit sets the number of workers to start up +# initially. If the number of active clients exceeds this, +# then more threads are spawned, up to max_workers limit. +# Typically you'd want max_workers to equal maximum number +# of clients allowed +#min_workers = 5 +#max_workers = 20 + + +# The number of priority workers. If all workers from above +# pool are stuck, some calls marked as high priority +# (notably domainDestroy) can be executed in this pool. +#prio_workers = 5 + +# Total global limit on concurrent RPC calls. Should be +# at least as large as max_workers. Beyond this, RPC requests +# will be read into memory and queued. This directly impacts +# memory usage, currently each request requires 256 KB of +# memory. So by default up to 5 MB of memory is used +# +# XXX this isn't actually enforced yet, only the per-client +# limit is used so far +#max_requests = 20 + +# Limit on concurrent requests from a single client +# connection. To avoid one client monopolizing the server +# this should be a small fraction of the global max_requests +# and max_workers parameter +#max_client_requests = 5 + +# Same processing controls, but this time for the admin interface. +# For description of each option, be so kind to scroll few lines +# upwards. + +#admin_min_workers = 1 +#admin_max_workers = 5 +#admin_max_clients = 5 +#admin_max_queued_clients = 5 +#admin_max_client_requests = 5 + +################################################################# +# +# Logging controls +# + +# Logging level: 4 errors, 3 warnings, 2 information, 1 debug +# basically 1 will log everything possible +# Note: Journald may employ rate limiting of the messages logged +# and thus lock up the libvirt daemon. To use the debug level with +# journald you have to specify it explicitly in 'log_outputs', otherwise +# only information level messages will be logged. +#log_level = 3 + +# Logging filters: +# A filter allows to select a different logging level for a given category +# of logs +# The format for a filter is one of: +# x:name +# x:+name +# where name is a string which is matched against source file name, +# e.g., "remote", "qemu", or "util/json", the optional "+" prefix +# tells libvirt to log stack trace for each message matching name, +# and x is the minimal level where matching messages should be logged: +# 1: DEBUG +# 2: INFO +# 3: WARNING +# 4: ERROR +# +# Multiple filters can be defined in a single @filters, they just need to be +# separated by spaces. +# +# e.g. to only get warning or errors from the remote layer and only errors +# from the event layer: +#log_filters="3:remote 4:event" + +# Logging outputs: +# An output is one of the places to save logging information +# The format for an output can be: +# x:stderr +# output goes to stderr +# x:syslog:name +# use syslog for the output and use the given name as the ident +# x:file:file_path +# output to a file, with the given filepath +# x:journald +# output to journald logging system +# In all case the x prefix is the minimal level, acting as a filter +# 1: DEBUG +# 2: INFO +# 3: WARNING +# 4: ERROR +# +# Multiple outputs can be defined, they just need to be separated by spaces. +# e.g. to log all warnings and errors to syslog under the libvirtd ident: +#log_outputs="3:syslog:libvirtd" +# + +# Log debug buffer size: +# +# This configuration option is no longer used, since the global +# log buffer functionality has been removed. Please configure +# suitable log_outputs/log_filters settings to obtain logs. +#log_buffer_size = 64 + + +################################################################## +# +# Auditing +# +# This setting allows usage of the auditing subsystem to be altered: +# +# audit_level == 0 -> disable all auditing +# audit_level == 1 -> enable auditing, only if enabled on host (default) +# audit_level == 2 -> enable auditing, and exit if disabled on host +# +#audit_level = 2 +# +# If set to 1, then audit messages will also be sent +# via libvirt logging infrastructure. Defaults to 0 +# +#audit_logging = 1 + +################################################################### +# UUID of the host: +# Provide the UUID of the host here in case the command +# 'dmidecode -s system-uuid' does not provide a valid uuid. In case +# 'dmidecode' does not provide a valid UUID and none is provided here, a +# temporary UUID will be generated. +# Keep the format of the example UUID below. UUID must not have all digits +# be the same. + +# NB This default all-zeros UUID will not work. Replace +# it with the output of the 'uuidgen' command and then +# uncomment this entry +#host_uuid = "00000000-0000-0000-0000-000000000000" + +################################################################### +# Keepalive protocol: +# This allows libvirtd to detect broken client connections or even +# dead clients. A keepalive message is sent to a client after +# keepalive_interval seconds of inactivity to check if the client is +# still responding; keepalive_count is a maximum number of keepalive +# messages that are allowed to be sent to the client without getting +# any response before the connection is considered broken. In other +# words, the connection is automatically closed approximately after +# keepalive_interval * (keepalive_count + 1) seconds since the last +# message received from the client. If keepalive_interval is set to +# -1, libvirtd will never send keepalive requests; however clients +# can still send them and the daemon will send responses. When +# keepalive_count is set to 0, connections will be automatically +# closed after keepalive_interval seconds of inactivity without +# sending any keepalive messages. +# +#keepalive_interval = 5 +#keepalive_count = 5 +# +# If set to 1, libvirtd will refuse to talk to clients that do not +# support keepalive protocol. Defaults to 0. +# +#keepalive_required = 1 + +# Keepalive settings for the admin interface +#admin_keepalive_interval = 5 +#admin_keepalive_count = 5 +# +#admin_keepalive_required = 1 diff --git a/config-archive/etc/postfix/main.cf b/config-archive/etc/postfix/main.cf index 2da72a08..38714de1 100644 --- a/config-archive/etc/postfix/main.cf +++ b/config-archive/etc/postfix/main.cf @@ -664,7 +664,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-3.0.0/html +html_directory = /usr/share/doc/postfix-3.0.1-r1/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -677,7 +677,8 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-3.0.0/readme +readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme +# inet_protocols = ipv4 meta_directory = /etc/postfix shlib_directory = /usr/lib64/postfix/${mail_version} home_mailbox = .maildir/ diff --git a/config-archive/etc/postfix/main.cf.1 b/config-archive/etc/postfix/main.cf.1 index 6ffa90b0..2da72a08 100644 --- a/config-archive/etc/postfix/main.cf.1 +++ b/config-archive/etc/postfix/main.cf.1 @@ -10,6 +10,25 @@ # For best results, change no more than 2-3 parameters at a time, # and test if Postfix still works after every change. +# COMPATIBILITY +# +# The compatibility_level determines what default settings Postfix +# will use for main.cf and master.cf settings. These defaults will +# change over time. +# +# To avoid breaking things, Postfix will use backwards-compatible +# default settings and log where it uses those old backwards-compatible +# default settings, until the system administrator has determined +# if any backwards-compatible default settings need to be made +# permanent in main.cf or master.cf. +# +# When this review is complete, update the compatibility_level setting +# below as recommended in the RELEASE_NOTES file. +# +# The level below is what should be used with new (not upgrade) installs. +# +#compatibility_level = 2 + # SOFT BOUNCE # # The soft_bounce parameter provides a limited safety net for @@ -645,7 +664,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.11.3/html +html_directory = /usr/share/doc/postfix-3.0.0/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +677,9 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.11.3/readme +readme_directory = /usr/share/doc/postfix-3.0.0/readme +meta_directory = /etc/postfix +shlib_directory = /usr/lib64/postfix/${mail_version} home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.2 b/config-archive/etc/postfix/main.cf.2 index 5e3d60fd..6ffa90b0 100644 --- a/config-archive/etc/postfix/main.cf.2 +++ b/config-archive/etc/postfix/main.cf.2 @@ -5,7 +5,7 @@ # For common configuration examples, see BASIC_CONFIGURATION_README # and STANDARD_CONFIGURATION_README. To find these documents, use # the command "postconf html_directory readme_directory", or go to -# http://www.postfix.org/. +# http://www.postfix.org/BASIC_CONFIGURATION_README.html etc. # # For best results, change no more than 2-3 parameters at a time, # and test if Postfix still works after every change. @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.10.3/html +html_directory = /usr/share/doc/postfix-2.11.3/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.10.3/readme +readme_directory = /usr/share/doc/postfix-2.11.3/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.3 b/config-archive/etc/postfix/main.cf.3 index 0436c1c4..5e3d60fd 100644 --- a/config-archive/etc/postfix/main.cf.3 +++ b/config-archive/etc/postfix/main.cf.3 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.10.2/html +html_directory = /usr/share/doc/postfix-2.10.3/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.10.2/readme +readme_directory = /usr/share/doc/postfix-2.10.3/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.4 b/config-archive/etc/postfix/main.cf.4 index f7e2a6a6..0436c1c4 100644 --- a/config-archive/etc/postfix/main.cf.4 +++ b/config-archive/etc/postfix/main.cf.4 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.10.1/html +html_directory = /usr/share/doc/postfix-2.10.2/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.10.1/readme +readme_directory = /usr/share/doc/postfix-2.10.2/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.5 b/config-archive/etc/postfix/main.cf.5 index 1232f478..f7e2a6a6 100644 --- a/config-archive/etc/postfix/main.cf.5 +++ b/config-archive/etc/postfix/main.cf.5 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.10.0/html +html_directory = /usr/share/doc/postfix-2.10.1/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.10.0/readme +readme_directory = /usr/share/doc/postfix-2.10.1/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.6 b/config-archive/etc/postfix/main.cf.6 index c438ed09..1232f478 100644 --- a/config-archive/etc/postfix/main.cf.6 +++ b/config-archive/etc/postfix/main.cf.6 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.9.5/html +html_directory = /usr/share/doc/postfix-2.10.0/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.9.5/readme +readme_directory = /usr/share/doc/postfix-2.10.0/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.7 b/config-archive/etc/postfix/main.cf.7 index c1606d6e..c438ed09 100644 --- a/config-archive/etc/postfix/main.cf.7 +++ b/config-archive/etc/postfix/main.cf.7 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.9.4/html +html_directory = /usr/share/doc/postfix-2.9.5/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,11 +658,11 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.9.4/readme +readme_directory = /usr/share/doc/postfix-2.9.5/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes -smtpd_sasl2_auth_enable = yes +#smtpd_sasl2_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_sasl_local_domain = $myhostname diff --git a/config-archive/etc/postfix/main.cf.8 b/config-archive/etc/postfix/main.cf.8 index 22ce4373..c1606d6e 100644 --- a/config-archive/etc/postfix/main.cf.8 +++ b/config-archive/etc/postfix/main.cf.8 @@ -645,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.9.3/html +html_directory = /usr/share/doc/postfix-2.9.4/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -658,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.9.3/readme +readme_directory = /usr/share/doc/postfix-2.9.4/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.9 b/config-archive/etc/postfix/main.cf.9 index 03fb0bfa..22ce4373 100644 --- a/config-archive/etc/postfix/main.cf.9 +++ b/config-archive/etc/postfix/main.cf.9 @@ -39,7 +39,7 @@ command_directory = /usr/sbin # daemon programs (i.e. programs listed in the master.cf file). This # directory must be owned by root. # -daemon_directory = /usr/lib64/postfix +daemon_directory = /usr/libexec/postfix # The data_directory parameter specifies the location of Postfix-writable # data files (caches, random numbers). This directory must be owned @@ -463,7 +463,12 @@ mynetworks = 10.12.11.0/24, 127.0.0.0/8, [::1]/128, [2001:6f8:1db7::]/64 # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # -#mailbox_transport = lmtp:unix:/file/name +# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd" +# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf. +#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp +# +# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and +# subsequent line in master.cf. #mailbox_transport = cyrus # The fallback_transport specifies the optional transport in master.cf @@ -640,7 +645,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-2.8.9/html +html_directory = /usr/share/doc/postfix-2.9.3/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -653,7 +658,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.8.9/readme +readme_directory = /usr/share/doc/postfix-2.9.3/readme home_mailbox = .maildir/ smtpd_sasl_auth_enable = yes diff --git a/config-archive/etc/postfix/main.cf.dist b/config-archive/etc/postfix/main.cf.dist index b38876b5..ca960fe3 100644 --- a/config-archive/etc/postfix/main.cf.dist +++ b/config-archive/etc/postfix/main.cf.dist @@ -659,7 +659,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-3.0.1-r1/html +html_directory = /usr/share/doc/postfix-3.0.2/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -672,7 +672,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme +readme_directory = /usr/share/doc/postfix-3.0.2/readme inet_protocols = ipv4 meta_directory = /etc/postfix shlib_directory = /usr/lib64/postfix/${mail_version} diff --git a/csh.env b/csh.env index 94f2e1a4..3fd93d6b 100644 --- a/csh.env +++ b/csh.env @@ -12,8 +12,7 @@ setenv GCC_SPECS '' setenv GSETTINGS_BACKEND 'dconf' setenv GUILE_LOAD_PATH '/usr/share/guile/1.8' setenv HG '/usr/bin/hg' -setenv INFOPATH '/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.5/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/info' -setenv JAVACC_HOME '/usr/share/javacc/' +setenv INFOPATH '/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.9.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.25.1/info' setenv LANG 'de_DE.UTF-8' setenv LC_ADDRESS 'de_DE.utf8' setenv LC_COLLATE 'de_DE.utf8' @@ -30,16 +29,16 @@ setenv LC_TIME 'de_DE.utf8' setenv LESS '-R -M --shift 5' setenv LESSOPEN '|lesspipe %s' setenv LIBBLURAY_CP '/usr/share/libbluray/lib/libbluray.jar' -setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.5/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.6/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/' +setenv MANPATH '/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.9.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.25.1/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.6/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/' setenv MULTIOSDIRS '../lib64:../lib32' setenv OPENGL_PROFILE 'xorg-x11' setenv PAGER '/usr/bin/less' -setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.5:/usr/lib64/subversion/bin:/usr/games/bin' +setenv PATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.9.3:/usr/lib64/subversion/bin:/usr/games/bin' setenv PRELINK_PATH_MASK '/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so:/usr/lib32/libfreebl3.so:/usr/lib32/libnssdbm3.so:/usr/lib32/libsoftokn3.so:/usr/bin/evolution' setenv PYTHONDOCS_2_7 '/usr/share/doc/python-docs-2.7.8/html/library' setenv QT_GRAPHICSSYSTEM 'raster' setenv QT_PLUGIN_PATH '/usr/lib64/kde4/plugins' -setenv ROOTPATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.5:/usr/lib64/subversion/bin' +setenv ROOTPATH '/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.9.3:/usr/lib64/subversion/bin' setenv R_HOME '/usr/lib64/R' setenv VBOX_APP_HOME '/usr/lib64/virtualbox' setenv XDG_CONFIG_DIRS '/etc/xdg' diff --git a/cups/printers.conf b/cups/printers.conf index 0a80cd79..2d14e5a5 100644 --- a/cups/printers.conf +++ b/cups/printers.conf @@ -1,5 +1,5 @@ # Printer configuration file for CUPS v2.0.3 -# Written by cupsd on 2015-10-07 19:30 +# Written by cupsd on 2015-10-10 09:47 # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING UUID urn:uuid:37ccb9f9-f39f-3442-414c-7de19e42748d diff --git a/cups/subscriptions.conf b/cups/subscriptions.conf index 4716c62c..a311f1b0 100644 --- a/cups/subscriptions.conf +++ b/cups/subscriptions.conf @@ -1,11 +1,3 @@ # Subscription configuration file for CUPS v2.0.3 -# Written by cupsd on 2015-10-07 19:30 -NextSubscriptionId 231 - -Events printer-changed -Owner root -LeaseDuration 86400 -Interval 60 -ExpirationTime 1444325383 -NextEventId 1 - +# Written by cupsd on 2015-10-11 09:47 +NextSubscriptionId 232 diff --git a/dbus-1/system.d/bluetooth.conf b/dbus-1/system.d/bluetooth.conf index 0ae606ee..d32eea4d 100644 --- a/dbus-1/system.d/bluetooth.conf +++ b/dbus-1/system.d/bluetooth.conf @@ -18,7 +18,10 @@ + + + diff --git a/dbus-1/system.d/ofono.conf b/dbus-1/system.d/ofono.conf new file mode 100644 index 00000000..ed56d3bd --- /dev/null +++ b/dbus-1/system.d/ofono.conf @@ -0,0 +1,28 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/dbus-1/system.d/org.freedesktop.NetworkManager.conf b/dbus-1/system.d/org.freedesktop.NetworkManager.conf index bdfe3e67..afbcc720 100644 --- a/dbus-1/system.d/org.freedesktop.NetworkManager.conf +++ b/dbus-1/system.d/org.freedesktop.NetworkManager.conf @@ -25,6 +25,8 @@ + + @@ -120,5 +122,7 @@ + + 1024 diff --git a/dmtab b/dmtab index 5fc1d793..0f3f05a4 100644 --- a/dmtab +++ b/dmtab @@ -1,5 +1,5 @@ #/etc/dmraid: config file for adding device-mapper volumes at boot -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/dmtab,v 1.1 2009/04/09 23:00:10 caleb Exp $ +# $Id$ # Format: : # Example: isw0: 0 312602976 striped 2 128 /dev/sda 0 /dev/sdb 0 diff --git a/env.d/04gcc-x86_64-pc-linux-gnu b/env.d/04gcc-x86_64-pc-linux-gnu index f43f5873..529faa97 100644 --- a/env.d/04gcc-x86_64-pc-linux-gnu +++ b/env.d/04gcc-x86_64-pc-linux-gnu @@ -1,6 +1,6 @@ -PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.5" -ROOTPATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.5" +PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.9.3" +ROOTPATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.9.3" GCC_SPECS="" -MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.5/man" -INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.5/info" +MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.9.3/man" +INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.9.3/info" MULTIOSDIRS="../lib64:../lib32" diff --git a/env.d/05binutils b/env.d/05binutils index 6c9aa5a6..04fe88fd 100644 --- a/env.d/05binutils +++ b/env.d/05binutils @@ -1,2 +1,2 @@ -MANPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man -INFOPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/info +MANPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.25.1/man +INFOPATH=/usr/share/binutils-data/x86_64-pc-linux-gnu/2.25.1/info diff --git a/env.d/22javacc b/env.d/22javacc deleted file mode 100644 index 0dfd0906..00000000 --- a/env.d/22javacc +++ /dev/null @@ -1 +0,0 @@ -JAVACC_HOME=/usr/share/javacc/ diff --git a/env.d/binutils/config-x86_64-pc-linux-gnu b/env.d/binutils/config-x86_64-pc-linux-gnu index 77a1de26..41de2f35 100644 --- a/env.d/binutils/config-x86_64-pc-linux-gnu +++ b/env.d/binutils/config-x86_64-pc-linux-gnu @@ -1 +1 @@ -CURRENT=2.24 +CURRENT=2.25.1 diff --git a/env.d/binutils/x86_64-pc-linux-gnu-2.24 b/env.d/binutils/x86_64-pc-linux-gnu-2.24 deleted file mode 100644 index c57d3fe8..00000000 --- a/env.d/binutils/x86_64-pc-linux-gnu-2.24 +++ /dev/null @@ -1,4 +0,0 @@ -TARGET="x86_64-pc-linux-gnu" -VER="2.24" -LIBPATH="/usr/lib64/binutils/x86_64-pc-linux-gnu/2.24" -FAKE_TARGETS="x86_64-pc-linux-gnu" diff --git a/env.d/binutils/x86_64-pc-linux-gnu-2.25.1 b/env.d/binutils/x86_64-pc-linux-gnu-2.25.1 new file mode 100644 index 00000000..97a2a184 --- /dev/null +++ b/env.d/binutils/x86_64-pc-linux-gnu-2.25.1 @@ -0,0 +1,3 @@ +TARGET="x86_64-pc-linux-gnu" +VER="2.25.1" +LIBPATH="/usr/lib64/binutils/x86_64-pc-linux-gnu/2.25.1" diff --git a/env.d/gcc/.NATIVE b/env.d/gcc/.NATIVE index 106fefd3..0967d73a 120000 --- a/env.d/gcc/.NATIVE +++ b/env.d/gcc/.NATIVE @@ -1 +1 @@ -x86_64-pc-linux-gnu-4.8.5 \ No newline at end of file +x86_64-pc-linux-gnu-4.9.3 \ No newline at end of file diff --git a/env.d/gcc/config-x86_64-pc-linux-gnu b/env.d/gcc/config-x86_64-pc-linux-gnu index 4b9db179..5ef56a33 100644 --- a/env.d/gcc/config-x86_64-pc-linux-gnu +++ b/env.d/gcc/config-x86_64-pc-linux-gnu @@ -1 +1 @@ -CURRENT=x86_64-pc-linux-gnu-4.8.5 +CURRENT=x86_64-pc-linux-gnu-4.9.3 diff --git a/env.d/gcc/x86_64-pc-linux-gnu-4.8.5 b/env.d/gcc/x86_64-pc-linux-gnu-4.8.5 deleted file mode 100644 index 195d1d04..00000000 --- a/env.d/gcc/x86_64-pc-linux-gnu-4.8.5 +++ /dev/null @@ -1,8 +0,0 @@ -LDPATH="/usr/lib/gcc/x86_64-pc-linux-gnu/4.8.5:/usr/lib/gcc/x86_64-pc-linux-gnu/4.8.5/32" -MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.5/man" -INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.5/info" -STDCXX_INCDIR="g++-v4" -CTARGET="x86_64-pc-linux-gnu" -GCC_SPECS="" -MULTIOSDIRS="../lib64:../lib32" -GCC_PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.5" diff --git a/env.d/gcc/x86_64-pc-linux-gnu-4.9.3 b/env.d/gcc/x86_64-pc-linux-gnu-4.9.3 new file mode 100644 index 00000000..e6e03df5 --- /dev/null +++ b/env.d/gcc/x86_64-pc-linux-gnu-4.9.3 @@ -0,0 +1,8 @@ +LDPATH="/usr/lib/gcc/x86_64-pc-linux-gnu/4.9.3:/usr/lib/gcc/x86_64-pc-linux-gnu/4.9.3/32" +MANPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.9.3/man" +INFOPATH="/usr/share/gcc-data/x86_64-pc-linux-gnu/4.9.3/info" +STDCXX_INCDIR="g++-v4" +CTARGET="x86_64-pc-linux-gnu" +GCC_SPECS="" +MULTIOSDIRS="../lib64:../lib32" +GCC_PATH="/usr/x86_64-pc-linux-gnu/gcc-bin/4.9.3" diff --git a/ethertypes b/ethertypes new file mode 100644 index 00000000..5e700f66 --- /dev/null +++ b/ethertypes @@ -0,0 +1,37 @@ +# +# Ethernet frame types +# This file describes some of the various Ethernet +# protocol types that are used on Ethernet networks. +# +# This list could be found on: +# http://www.iana.org/assignments/ethernet-numbers +# +# ... #Comment +# +IPv4 0800 ip ip4 # Internet IP (IPv4) +X25 0805 +ARP 0806 ether-arp # +FR_ARP 0808 # Frame Relay ARP [RFC1701] +BPQ 08FF # G8BPQ AX.25 Ethernet Packet +DEC 6000 # DEC Assigned proto +DNA_DL 6001 # DEC DNA Dump/Load +DNA_RC 6002 # DEC DNA Remote Console +DNA_RT 6003 # DEC DNA Routing +LAT 6004 # DEC LAT +DIAG 6005 # DEC Diagnostics +CUST 6006 # DEC Customer use +SCA 6007 # DEC Systems Comms Arch +TEB 6558 # Trans Ether Bridging [RFC1701] +RAW_FR 6559 # Raw Frame Relay [RFC1701] +AARP 80F3 # Appletalk AARP +ATALK 809B # Appletalk +802_1Q 8100 8021q 1q 802.1q dot1q # 802.1Q Virtual LAN tagged frame +IPX 8137 # Novell IPX +NetBEUI 8191 # NetBEUI +IPv6 86DD ip6 # IP version 6 +PPP 880B # PPP +ATMMPOA 884C # MultiProtocol over ATM +PPP_DISC 8863 # PPPoE discovery messages +PPP_SES 8864 # PPPoE session messages +ATMFATE 8884 # Frame-based ATM Transport over Ethernet +LOOP 9000 loopback # loop proto diff --git a/gconf/gconf.xml.defaults/%gconf-tree.xml b/gconf/gconf.xml.defaults/%gconf-tree.xml index 8554247b..ed9b14c2 100644 --- a/gconf/gconf.xml.defaults/%gconf-tree.xml +++ b/gconf/gconf.xml.defaults/%gconf-tree.xml @@ -2950,39 +2950,39 @@ - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + @@ -3055,9 +3055,9 @@ - - - + + + @@ -20303,13 +20303,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20317,7 +20317,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "ymsgr" URLs, if enabled. - + True if the command specified in the "command" key should handle "ymsgr" URLs. @@ -20325,13 +20325,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20339,7 +20339,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "xmpp" URLs, if enabled. - + True if the command specified in the "command" key should handle "xmpp" URLs. @@ -20347,13 +20347,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20361,7 +20361,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "sip" URLs, if enabled. - + True if the command specified in the "command" key should handle "sip" URLs. @@ -20369,13 +20369,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20383,7 +20383,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "msnim" URLs, if enabled. - + True if the command specified in the "command" key should handle "msnim" URLs. @@ -20391,13 +20391,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20405,7 +20405,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "irc" URLs, if enabled. - + True if the command specified in the "command" key should handle "irc" URLs. @@ -20413,13 +20413,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20427,7 +20427,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "icq" URLs, if enabled. - + True if the command specified in the "command" key should handle "icq" URLs. @@ -20435,13 +20435,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20449,7 +20449,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "gg" URLs, if enabled. - + True if the command specified in the "command" key should handle "gg" URLs. @@ -20735,13 +20735,13 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati - + True if the command used to handle this type of URL should be run in a terminal. - + purple-url-handler "%s" @@ -20749,7 +20749,7 @@ The parser is fairly liberal and allows lower or upper case, and also abbreviati The command used to handle "aim" URLs, if enabled. - + True if the command specified in the "command" key should handle "aim" URLs. diff --git a/gdm/custom.conf b/gdm/custom.conf index 36591e31..c9e28648 100644 --- a/gdm/custom.conf +++ b/gdm/custom.conf @@ -1,6 +1,8 @@ # GDM configuration storage [daemon] +# Uncoment the line below to force the login screen to use Xorg +#WaylandEnable=false [security] @@ -11,4 +13,6 @@ [chooser] [debug] +# Uncomment the line below to turn on debugging +#Enable=true diff --git a/hosts b/hosts index 364bdff1..5c675dae 100644 --- a/hosts +++ b/hosts @@ -13,6 +13,8 @@ 2a01:238:4225:6e00:8f8c:808a:7fb8:88df helga-six.brehm-online.com helga-six 10.12.11.254 fritz.box fritzbox +2a02:8109:ae3f:fa04:a0bf:294e:7b9d:8e70 olga.home.brehm-online.com olga + #185.48.117.162 fratest.profitbricks.com # diff --git a/init.d/NetworkManager b/init.d/NetworkManager index 8465449d..bd828b78 100755 --- a/init.d/NetworkManager +++ b/init.d/NetworkManager @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright (c) 2008 Saleem Abdulrasool # Distributed under the terms of the GNU General Purpose License v2 -# $Header: /var/cvsroot/gentoo-x86/net-misc/networkmanager/files/init.d.NetworkManager,v 1.1 2013/01/28 07:05:05 tetromino Exp $ +# $Id$ description="NetworkManager daemon. The service is marked as started only \ when a network connection is established." diff --git a/init.d/bluetooth b/init.d/bluetooth index f97fdb2c..3b9569ee 100755 --- a/init.d/bluetooth +++ b/init.d/bluetooth @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/net-wireless/bluez/files/bluetooth-init.d-r3,v 1.2 2014/01/09 13:24:42 joker Exp $ +# $Id$ depend() { after coldplug diff --git a/init.d/device-mapper b/init.d/device-mapper index 56e75037..5e3669d0 100755 --- a/init.d/device-mapper +++ b/init.d/device-mapper @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/device-mapper.rc-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $ +# $Id$ depend() { # As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that diff --git a/init.d/dmeventd b/init.d/dmeventd index 3c2f5f32..7067391f 100755 --- a/init.d/dmeventd +++ b/init.d/dmeventd @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1,v 1.3 2014/02/08 21:17:46 robbat2 Exp $ +# $Id$ PIDFILE=/run/dmeventd.pid BIN=/sbin/dmeventd diff --git a/init.d/ebtables b/init.d/ebtables new file mode 100755 index 00000000..770dd435 --- /dev/null +++ b/init.d/ebtables @@ -0,0 +1,102 @@ +#!/sbin/runscript +# Copyright 1999-2012 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Id$ + +extra_commands="save panic" +extra_started_commands="reload" + +ebtables_bin="/sbin/ebtables" +ebtables_save=${EBTABLES_SAVE} + +depend() { + before net + use logger +} + +ebtables_tables() { + for table in filter nat broute; do + if ${ebtables_bin} -t ${table} -L > /dev/null 2>&1; then + echo -n "${table} " + fi + done +} + +set_table_policy() { + local chains table=$1 policy=$2 + case ${table} in + nat) chains="PREROUTING POSTROUTING OUTPUT";; + broute) chains="BROUTING";; + filter) chains="INPUT FORWARD OUTPUT";; + *) chains="";; + esac + local chain + for chain in ${chains} ; do + ${ebtables_bin} -t ${table} -P ${chain} ${policy} + done +} + +checkconfig() { + if [ ! -f ${ebtables_save} ] ; then + eerror "Not starting ebtables. First create some rules then run:" + eerror "/etc/init.d/ebtables save" + return 1 + fi + return 0 +} + +start() { + checkconfig || return 1 + ebegin "Loading ebtables state and starting bridge firewall" + ${ebtables_bin}-restore ${SAVE_RESTORE_OPTIONS} < "${ebtables_save}" + eend $? +} + +stop() { + if [ "${SAVE_ON_STOP}" = "yes" ] ; then + save || return 1 + fi + ebegin "Stopping bridge firewall" + local a + for a in $(ebtables_tables); do + set_table_policy $a ACCEPT + + ${ebtables_bin} -t $a -F + ${ebtables_bin} -t $a -X + done + eend $? +} + +reload() { + ebegin "Flushing bridge firewall" + local a + for a in $(ebtables_tables); do + ${ebtables_bin} -t $a -F + ${ebtables_bin} -t $a -X + done + eend $? + + start +} + +save() { + ebegin "Saving ebtables state" + touch "${ebtables_save}" + chmod 0600 "${ebtables_save}" + ${ebtables_bin}-save $(ebtables_tables) ${SAVE_RESTORE_OPTIONS} > "${ebtables_save}" + eend $? +} + +panic() { + service_started ebtables && svc_stop + + local a + ebegin "Dropping all packets forwarded on bridges" + for a in $(ebtables_tables); do + ${ebtables_bin} -t $a -F + ${ebtables_bin} -t $a -X + + set_table_policy $a DROP + done + eend $? +} diff --git a/init.d/fancontrol b/init.d/fancontrol index 51857a1f..0474d12b 100755 --- a/init.d/fancontrol +++ b/init.d/fancontrol @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2012 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/files/fancontrol-init.d-2,v 1.1 2012/12/28 00:00:03 flameeyes Exp $ +# $Id$ CONFIG=/etc/fancontrol diff --git a/init.d/lm_sensors b/init.d/lm_sensors index 18fb3537..b33814f6 100755 --- a/init.d/lm_sensors +++ b/init.d/lm_sensors @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2006 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/files/lm_sensors-3-init.d,v 1.1 2008/03/17 07:59:28 dberkholz Exp $ +# $Id$ checkconfig() { if [ ! -f /etc/conf.d/lm_sensors ]; then diff --git a/init.d/lvm b/init.d/lvm index 7fdf50e1..62ddac41 100755 --- a/init.d/lvm +++ b/init.d/lvm @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm.rc-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $ +# $Id$ depend() { before checkfs fsck diff --git a/init.d/lvm-monitoring b/init.d/lvm-monitoring index c53a6046..fd76d96d 100755 --- a/init.d/lvm-monitoring +++ b/init.d/lvm-monitoring @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm-monitoring.initd-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $ +# $Id$ # This script is based on upstream file # LVM2.2.02.67/scripts/lvm2_monitoring_init_red_hat.in diff --git a/init.d/lvmetad b/init.d/lvmetad index e16d55c4..abeca75f 100755 --- a/init.d/lvmetad +++ b/init.d/lvmetad @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvmetad.initd-2.02.105-r2,v 1.2 2014/02/08 21:17:46 robbat2 Exp $ +# $Id$ pidfile="/run/lvmetad.pid" command="/sbin/lvmetad" diff --git a/init.d/lxc b/init.d/lxc deleted file mode 100755 index c9ef9991..00000000 --- a/init.d/lxc +++ /dev/null @@ -1,139 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -CONTAINER=${SVCNAME#*.} - -LXC_PATH=`lxc-config lxc.lxcpath` - -lxc_get_configfile() { - if [ -f "${LXC_PATH}/${CONTAINER}.conf" ]; then - echo "${LXC_PATH}/${CONTAINER}.conf" - elif [ -f "${LXC_PATH}/${CONTAINER}/config" ]; then - echo "${LXC_PATH}/${CONTAINER}/config" - else - eerror "Unable to find a suitable configuration file." - eerror "If you set up the container in a non-standard" - eerror "location, please set the CONFIGFILE variable." - return 1 - fi -} - -[ $CONTAINER != $SVCNAME ] && CONFIGFILE=${CONFIGFILE:-$(lxc_get_configfile)} - -lxc_get_var() { - awk 'BEGIN { FS="[ \t]*=[ \t]*" } $1 == "'$1'" { print $2; exit }' ${CONFIGFILE} -} - -lxc_get_net_link_type() { - awk 'BEGIN { FS="[ \t]*=[ \t]*"; _link=""; _type="" } - $1 == "lxc.network.type" {_type=$2;} - $1 == "lxc.network.link" {_link=$2;} - {if(_link != "" && _type != ""){ - printf("%s:%s\n", _link, _type ); - _link=""; _type=""; - }; }' <${CONFIGFILE} -} - -checkconfig() { - if [ ${CONTAINER} = ${SVCNAME} ]; then - eerror "You have to create an init script for each container:" - eerror " ln -s lxc /etc/init.d/lxc.container" - return 1 - fi - - # no need to output anything, the function takes care of that. - [ -z "${CONFIGFILE}" ] && return 1 - - utsname=$(lxc_get_var lxc.utsname) - if [ ${CONTAINER} != ${utsname} ]; then - eerror "You should use the same name for the service and the" - eerror "container. Right now the container is called ${utsname}" - return 1 - fi -} - -depend() { - # be quiet, since we have to run depend() also for the - # non-muxed init script, unfortunately. - checkconfig 2>/dev/null || return 0 - - config ${CONFIGFILE} - need localmount - - local _x _if - for _x in $(lxc_get_net_link_type); do - _if=${_x%:*} - case "${_x##*:}" in - # when the network type is set to phys, we can make use of a - # network service (for instance to set it up before we disable - # the net_admin capability), but we might also not set it up - # at all on the host and leave the net_admin capable service - # to take care of it. - phys) use net.${_if} ;; - *) need net.${_if} ;; - esac - done -} - -start() { - checkconfig || return 1 - rm /var/log/lxc/${CONTAINER}.log - - rootpath=$(lxc_get_var lxc.rootfs) - - # Check the format of our init and the chroot's init, to see - # if we have to use linux32 or linux64; always use setarch - # when required, as that makes it easier to deal with - # x32-based containers. - case $(scanelf -BF '%a#f' ${rootpath}/sbin/init) in - EM_X86_64) setarch=linux64;; - EM_386) setarch=linux32;; - esac - - ebegin "Starting ${CONTAINER}" - env -i ${setarch} $(type -p lxc-start) -l WARN -n ${CONTAINER} -f ${CONFIGFILE} -d -o /var/log/lxc/${CONTAINER}.log - sleep 0.5 - - # lxc-start -d will _always_ report a correct startup, even if it - # failed, so rather than trust that, check that the cgroup exists. - [ -d /sys/fs/cgroup/cpuset/lxc/${CONTAINER} ] - eend $? -} - -stop() { - checkconfig || return 1 - - - if ! [ -d /sys/fs/cgroup/cpuset/lxc/${CONTAINER} ]; then - ewarn "${CONTAINER} doesn't seem to be started." - return 0 - fi - - init_pid=$(lxc-info -n ${CONTAINER} --pid | awk '{ print $2 }') - - if [ -z "${init_pid}" ]; then - ewarn "${CONTAINER} doesn't seem to be running." - return 0 - fi - - ebegin "Shutting down system in ${CONTAINER}" - kill -PWR ${init_pid} - eend $? - - TIMEOUT=${TIMEOUT:-30} - i=0 - while [ -n "$(pgrep -P ${init_pid})" -a $i -lt ${TIMEOUT} ]; do - sleep 1 - i=$(expr $i + 1) - done - - if [ -n "${missingprocs}" ]; then - ewarn "Something failed to properly shut down in ${CONTAINER}" - fi - - ebegin "Stopping ${CONTAINER}" - lxc-stop -n ${CONTAINER} - eend $? -} diff --git a/init.d/named b/init.d/named index a320d34f..14b5dd71 100755 --- a/init.d/named +++ b/init.d/named @@ -14,7 +14,7 @@ depend() { NAMED_CONF=${CHROOT}/etc/bind/named.conf -OPENSSL_LIBGOST=${OPENSSL_LIBGOST:-0} +OPENSSL_LIBGOST=${OPENSSL_LIBGOST:-1} MOUNT_CHECK_TIMEOUT=${MOUNT_CHECK_TIMEOUT:-60} _mount() { diff --git a/init.d/ofono b/init.d/ofono new file mode 100755 index 00000000..644d372e --- /dev/null +++ b/init.d/ofono @@ -0,0 +1,22 @@ +#!/sbin/runscript +# Copyright 1999-2009 Gentoo Foundation +# Distributed under the terms of the GNU General Purpose License v2 +# $Id$ + +depend() { + need dbus +} + +start() { + ebegin "Starting oFono" + start-stop-daemon --start --quiet --exec /usr/sbin/ofonod + eend $? +} + +stop() { + ebegin "Stopping oFono" + start-stop-daemon --stop --quiet --exec /usr/sbin/ofonod + eend $? +} + +# vim: set ft=gentoo-init-d ts=3 sw=3 et: diff --git a/init.d/postfix b/init.d/postfix index aecd8e71..d37981d0 100755 --- a/init.d/postfix +++ b/init.d/postfix @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2012 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/postfix.rc6.2.7,v 1.2 2012/03/07 10:27:37 eras Exp $ +# $Id$ extra_started_commands="reload abort flush" diff --git a/init.d/pydoc-2.7 b/init.d/pydoc-2.7 index 79c23742..4bc5545c 100755 --- a/init.d/pydoc-2.7 +++ b/init.d/pydoc-2.7 @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Technologies, Inc. # Distributed under the terms of the GNU General Public Licence v2 -# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.init,v 1.5 2014/10/12 12:37:07 djc Exp $ +# $Id$ start() { local pydoc_port="${PYDOC2_7_PORT-${PYDOC_PORT}}" diff --git a/init.d/pydoc-3.4 b/init.d/pydoc-3.4 index 0b51442e..26f67817 100755 --- a/init.d/pydoc-3.4 +++ b/init.d/pydoc-3.4 @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Technologies, Inc. # Distributed under the terms of the GNU General Public Licence v2 -# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/files/pydoc.init,v 1.5 2014/10/12 12:37:07 djc Exp $ +# $Id$ start() { local pydoc_port="${PYDOC3_4_PORT-${PYDOC_PORT}}" diff --git a/init.d/rfcomm b/init.d/rfcomm index c5640555..4a919169 100755 --- a/init.d/rfcomm +++ b/init.d/rfcomm @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/net-wireless/bluez/files/rfcomm-init.d-r2,v 1.1 2014/06/26 17:18:43 alonbl Exp $ +# $Id$ depend() { need bluetooth diff --git a/init.d/rsyslog b/init.d/rsyslog index ec831d7f..a74f218e 100755 --- a/init.d/rsyslog +++ b/init.d/rsyslog @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2014 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/app-admin/rsyslog/files/8-stable/rsyslog.initd,v 1.1 2014/09/30 13:09:39 polynomial-c Exp $ +# $Id$ RSYSLOG_CONFIGFILE=${RSYSLOG_CONFIGFILE:-"/etc/rsyslog.conf"} RSYSLOG_PIDFILE=${RSYSLOG_PIDFILE:-"/run/rsyslogd.pid"} diff --git a/init.d/ulogd b/init.d/ulogd index 38b0fa9d..47a0674c 100755 --- a/init.d/ulogd +++ b/init.d/ulogd @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2015 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/app-admin/ulogd/files/ulogd.init,v 1.1 2015/05/30 09:38:29 idella4 Exp $ +# $Id$ extra_started_commands="reload reopen" @@ -10,7 +10,7 @@ extra_started_commands="reload reopen" : ${ULOGD_OPTS:=--daemon --uid ulogd --pidfile ${ULOGD_PIDFILE}} depend() { - before iptables ip6tables ebtables firewall + before iptables ip6tables ebtables nftables firewall after mysql postgresql } diff --git a/init.d/unbound b/init.d/unbound index 90deb23e..f17d0720 100755 --- a/init.d/unbound +++ b/init.d/unbound @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2011 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/net-dns/unbound/files/unbound.initd,v 1.2 2011/09/13 15:14:49 matsuu Exp $ +# $Id$ name="unbound daemon" extra_commands="configtest" diff --git a/init.d/vde b/init.d/vde new file mode 100755 index 00000000..9a1500ee --- /dev/null +++ b/init.d/vde @@ -0,0 +1,26 @@ +#!/sbin/runscript +# Copyright 1999-2013 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Id$ + +depend() { + after net.${VDE_TAP} +} + + +start() { + ebegin "Starting vde" + [ "${VDE_MODPROBE_TUN}" = "yes" ] && modprobe tun + start-stop-daemon --start --quiet \ + --exec /usr/bin/vde_switch -- ${VDE_OPTS} + eend $? "Failed to start vde" + chmod -R ${VDE_SOCK_CHMOD} /var/run/vde.ctl + chown -R ${VDE_SOCK_CHOWN} /var/run/vde.ctl +} + +stop() { + ebegin "Stopping vde" + start-stop-daemon --stop --quiet --exec /usr/bin/vde_switch + [ "${VDE_MODPROBE_TUN}" = "yes" ] && modprobe -r tun + eend $? "Failed to stop vde" +} diff --git a/init.d/virtlockd b/init.d/virtlockd index bfa37a5a..396ab654 100755 --- a/init.d/virtlockd +++ b/init.d/virtlockd @@ -1,7 +1,7 @@ #!/sbin/runscript # Copyright 1999-2015 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/app-emulation/libvirt/files/virtlockd.init-r1,v 1.1 2015/05/24 21:05:42 tamiko Exp $ +# $Id$ description="libvirt virtual machine lock manager" command="/usr/sbin/virtlockd" diff --git a/ld.so.conf.d/05gcc-x86_64-pc-linux-gnu.conf b/ld.so.conf.d/05gcc-x86_64-pc-linux-gnu.conf index 0af24b8a..8bf4cbe0 100644 --- a/ld.so.conf.d/05gcc-x86_64-pc-linux-gnu.conf +++ b/ld.so.conf.d/05gcc-x86_64-pc-linux-gnu.conf @@ -1,2 +1,2 @@ -/usr/lib/gcc/x86_64-pc-linux-gnu/4.8.5/32 -/usr/lib/gcc/x86_64-pc-linux-gnu/4.8.5 +/usr/lib/gcc/x86_64-pc-linux-gnu/4.9.3/32 +/usr/lib/gcc/x86_64-pc-linux-gnu/4.9.3 diff --git a/libvirt/libvirtd.conf b/libvirt/libvirtd.conf index a0f0bb4b..3fd232d1 100644 --- a/libvirt/libvirtd.conf +++ b/libvirt/libvirtd.conf @@ -107,9 +107,17 @@ unix_sock_group = "libvirt" # control, then you may want to relax this too. #unix_sock_rw_perms = "0770" +# Set the UNIX socket permissions for the admin interface socket. +# +# Default allows only owner (root), do not change it unless you are +# sure to whom you are exposing the access to. +#unix_sock_admin_perms = "0700" + # Set the name of the directory in which sockets will be found/created. #unix_sock_dir = "/var/run/libvirt" + + ################################################################# # # Authentication. @@ -310,6 +318,16 @@ auth_unix_rw = "polkit" # and max_workers parameter #max_client_requests = 5 +# Same processing controls, but this time for the admin interface. +# For description of each option, be so kind to scroll few lines +# upwards. + +#admin_min_workers = 1 +#admin_max_workers = 5 +#admin_max_clients = 5 +#admin_max_queued_clients = 5 +#admin_max_client_requests = 5 + ################################################################# # # Logging controls @@ -432,3 +450,9 @@ host_uuid = "56a41aab-92b8-4840-b9ef-39a41c8d6b01" # support keepalive protocol. Defaults to 0. # #keepalive_required = 1 + +# Keepalive settings for the admin interface +#admin_keepalive_interval = 5 +#admin_keepalive_count = 5 +# +#admin_keepalive_required = 1 diff --git a/logrotate.d/libvirtd.libxl b/logrotate.d/libvirtd.libxl new file mode 100644 index 00000000..c531513e --- /dev/null +++ b/logrotate.d/libvirtd.libxl @@ -0,0 +1,9 @@ +/var/log/libvirt/libxl/*.log { + weekly + missingok + rotate 4 + compress + delaycompress + copytruncate + minsize 100k +} diff --git a/lvm/lvm.conf b/lvm/lvm.conf index b9041b10..7e2e648b 100644 --- a/lvm/lvm.conf +++ b/lvm/lvm.conf @@ -39,6 +39,22 @@ devices { # to use with LVM2. scan = [ "/dev" ] + # Select external device information source to use for further and more + # detailed device determination. Some information may already be available + # in the system and LVM2 can use this information to determine the exact + # type or use of the device it processes. Using existing external device + # information source can speed up device processing as LVM2 does not need + # to run its own native routines to acquire this information. For example, + # such information is used to drive LVM2 filtering like MD component + # detection, multipath component detection, partition detection and others. + # Possible options are: + # "none" - No external device information source is used. + # + # "udev" - Reuse existing udev database records. Applicable + # only if LVM is compiled with udev support. + # + external_device_info_source = "none" + # If set, the cache of block device nodes with all associated symlinks # will be constructed out of the existing udev database content. # This avoids using and opening any inapplicable non-block devices or @@ -166,6 +182,14 @@ devices { # 1 enables; 0 disables. md_component_detection = 1 + # By default, LVM2 will not ignore devices used as components of + # firmware RAID devices. Set to 1 to enable this detection. + # N.B. LVM2 itself is not detecting firmware RAID - an + # external_device_info_source other than "none" must + # be used for this detection to execute. + # 1 enables; 0 disables + fw_raid_component_detection = 0 + # By default, if a PV is placed directly upon an md device, LVM2 # will align its data blocks with the md device's stripe-width. # 1 enables; 0 disables. @@ -339,6 +363,15 @@ allocation { # range from 32(kiB) to 1048576 in multiples of 32. # cache_pool_chunk_size = 64 + # Specify the default cache mode used for new cache pools. + # Possible options are: + # "writethrough" - Data blocks are immediately written from + # the cache to disk. + # "writeback" - Data blocks are written from the cache + # back to disk after some delay to improve + # performance. + # cache_pool_cachemode = "writethrough" + # Set to 1 to guarantee that thin pool metadata will always # be placed on different PVs from the pool data. thin_pool_metadata_require_separate_pvs = 0 @@ -374,6 +407,9 @@ allocation { # first use. # N.B. zeroing larger thin pool chunk size degrades performance. # thin_pool_zero = 1 + + # Default physical extent size to use for newly created VGs (in KB). + # physical_extent_size = 4096 } # This section that allows you to configure the nature of the @@ -658,6 +694,24 @@ global { # setting. raid10_segtype_default = "raid10" + # 'sparse_segtype_default' defines which segtype will be used when the + # shorthand '-V and -L' option is used for sparse volume creation. + # + # "snapshot" - The original snapshot implementation provided by LVM2/DM. + # It is using old snashot that mixes data and metadata within + # a single COW storage volume and has poor performs when + # the size of stored data passes hundereds of MB. + # + # "thin" - Newer implementation leverages thin provisioning target. + # It has bigger minimal chunk size (64KiB) and uses separate volume + # for metadata. It has better performance especially in case of + # bigger data uses. This device type has also full snapshot support. + # + # Specify the '--type ' option to override this default + # setting. + sparse_segtype_default = "thin" + + # The default format for displaying LV names in lvdisplay was changed # in version 2.02.89 to show the LV name and path separately. # Previously this was always shown as /dev/vgname/lvname even when that @@ -680,26 +734,31 @@ global { # If lvmetad has been running while use_lvmetad was 0, it MUST be stopped # before changing use_lvmetad to 1 and started again afterwards. # - # If using lvmetad, the volume activation is also switched to automatic + # If using lvmetad, volume activation is also switched to automatic # event-based mode. In this mode, the volumes are activated based on - # incoming udev events that automatically inform lvmetad about new PVs - # that appear in the system. Once the VG is complete (all the PVs are - # present), it is auto-activated. The activation/auto_activation_volume_list - # setting controls which volumes are auto-activated (all by default). - # + # incoming udev events that automatically inform lvmetad about new PVs that + # appear in the system. Once a VG is complete (all the PVs are present), it + # is auto-activated. The activation/auto_activation_volume_list setting + # controls which volumes are auto-activated (all by default). + # A note about device filtering while lvmetad is used: - # When lvmetad is updated (either automatically based on udev events - # or directly by pvscan --cache call), the devices/filter - # is ignored and all devices are scanned by default. The lvmetad always - # keeps unfiltered information which is then provided to LVM commands - # and then each LVM command does the filtering based on devices/filter - # setting itself. - # To prevent scanning devices completely, even when using lvmetad, - # the devices/global_filter must be used. + + # When lvmetad is updated (either automatically based on udev events or + # directly by a pvscan --cache call), devices/filter is ignored and + # all devices are scanned by default -- lvmetad always keeps unfiltered + # information which is then provided to LVM commands and then each LVM + # command does the filtering based on devices/filter setting itself. This + # does not apply to non-regexp filters though: component filters such as + # multipath and MD are checked at pvscan --cache time. + + # In order to completely prevent LVM from scanning a device, even when using + # lvmetad, devices/global_filter must be used. + # N.B. Don't use lvmetad with locking type 3 as lvmetad is not yet # supported in clustered environment. If use_lvmetad=1 and locking_type=3 # is set at the same time, LVM always issues a warning message about this - # and then it automatically disables lvmetad use. + # and then it automatically disables use_lvmetad. + use_lvmetad = 1 # Full path of the utility called to check that a thin metadata device @@ -747,6 +806,7 @@ global { # external_origin # metadata_resize # external_origin_extend + # error_if_no_space # # thin_disabled_features = [ "discards", "block_size" ] @@ -907,6 +967,13 @@ activation { # enables or disables this automatic setting of the flag while LVs are created. # auto_set_activation_skip = 1 + # Control error behavior when provisioned device becomes full. This + # determines the default --errorwhenfull setting of new thin pools. + # The command line option --errorwhenfull takes precedence over this + # setting. error_when_full 0 means --errorwhenfull n. + # + # error_when_full = 0 + # For RAID or 'mirror' segment types, 'raid_region_size' is the # size (in KiB) of each: # - synchronization operation when initializing @@ -1074,6 +1141,11 @@ activation { # Report settings. # # report { + # If compact output is enabled, fields which don't have value + # set for any of the rows reported are skipped on output. Compact + # output is applicable only if report is buffered (report/buffered=1). + # compact_output=0 + # Align columns on report output. # aligned=1 diff --git a/lxc/.keep_app-emulation_lxc-0 b/lxc/.keep_app-emulation_lxc-0 deleted file mode 100644 index e69de29b..00000000 diff --git a/lxc/default.conf b/lxc/default.conf deleted file mode 100644 index 6c880103..00000000 --- a/lxc/default.conf +++ /dev/null @@ -1 +0,0 @@ -lxc.network.type = empty diff --git a/ofono/phonesim.conf b/ofono/phonesim.conf new file mode 100644 index 00000000..74bb645e --- /dev/null +++ b/ofono/phonesim.conf @@ -0,0 +1,14 @@ +# This is a sample file for the phonesim configuration +# +# It should be installed in your oFono system directory, +# e.g. /etc/ofono/phonesim.conf +# +# Each group is parsed as a modem device +# +# Each group shall at least define the address and port +# Address = +# Port = + +#[phonesim] +#Address=127.0.0.1 +#Port=12345 diff --git a/portage/make.conf b/portage/make.conf index f71b0bc9..1b3e5c6d 100644 --- a/portage/make.conf +++ b/portage/make.conf @@ -73,13 +73,13 @@ USE="3dnow 3dnowext X Xaw3d a52 aac aalib acl acpi ads aim alsa altnburgcards amr ao apache2 archive audiofile avahi bash-completion bazaar bluray branding bzip2 cairo caja calendar caps cdda cddb cdparanoia cdr cgi consolekit cpudetection cscope css ctype cups curl curlwrappers cvs dane dbase dbi dbus dga djvu doc dts dv dvb dvd dvdr dvdread eds examples - encode exif expat fam fastcgi ffmpeg fftw fits flac flatfile fltk fontconfig + encode exif expat fam fastcgi ffmpeg fftw fits flac flatfile flickr fltk fontconfig foomaticdb ftp gconf gd gd-external geoip ggi gif gimp git glade glib gmp gnome gnome-keyring - gnustep gphoto2 gpm graphviz gsl gsm gstreamer gtk gtk3 gtkhtml handbook hal hscolour html iconv icu id3 id3tag idea + gnustep gost gphoto2 gpm graphviz gsl gsm gstreamer gtk gtk3 gtkhtml handbook hal hscolour html iconv icu id3 id3tag idea idn ieee1394 imagemagick imap imlib inifile ithreads java javascript jabber jack java6 jbig jikes jingle jpeg jpeg2k json json-syck json-xs kde kdeenablefinal kdeprefix kerberos keyring kig-scripting kpathsea lame latex lcms ldap libcaca - libnotify libsamplerate libwww live lm_sensors log4j logrotate lua lxc lzma lzo mad meanwhile mercurial + libnotify libsamplerate libwww live lm_sensors log4j logrotate lua lxc lz4 lzma lzo mad meanwhile mercurial midi mhash mmx mmxext mng modperl modplug motif mp3 mp4 mpeg mplayer msn mtp musepack musicbrainz mysql mysqli nas nautilus ncurses next networkmanager nfs nis nptl nsplugin nss numpy odbc ogg openal openexr opengl openssl opus pango par pch pcntl pcre pdf perl diff --git a/portage/package.use b/portage/package.use index 0802829e..68675950 100644 --- a/portage/package.use +++ b/portage/package.use @@ -5,7 +5,7 @@ app-admin/gnome-system-tools nfs app-admin/keepass aot app-admin/rsyslog normalize omudpspoof relp rfc3195 rfc5424hmac snmp usertools zeromq app-admin/syslog-ng spoof-source sql -app-admin/ulogd dbi nfacct pcap +app-admin/ulogd -doc dbi nfacct pcap ulog app-arch/cabextract extra extra-tools app-arch/unzip natspec @@ -17,6 +17,7 @@ app-cdr/k3b css emovix app-crypt/johntheripper custom-cflags app-crypt/mit-krb5 -pkinit +app-crypt/pinentry clipboard app-crypt/qca gpg app-crypt/seahorse-plugins applet @@ -26,6 +27,8 @@ app-doc/doxygen clang dot app-editors/gedit -python_targets_python3_3 #app-editors/vim vim-pager vim-with-x #app-editors/gvim netbeans + +app-emulation/qemu kvm vde vte app-emulation/virtualbox extensions vnc # move app-admin/eselect-php app-eselect/eselect-php @@ -52,7 +55,7 @@ app-text/atril dvi t1lib xps app-text/djvu doc threads app-text/docbook-sgml-utils jadetex app-text/enchant aspell -zemberek -app-text/evince djvu dvi t1lib +app-text/evince djvu dvi -nsplugin t1lib app-text/texlive context cyrillic detex dvi2tty dvipdfm epspdf extra games graphics humanities jadetex metapost music omega pdfannotextractor pstricks publishers science tex4ht texi2html xetex xindy app-text/texlive-core xetex @@ -126,7 +129,7 @@ dev-scheme/guile deprecated discouraged networking regex dev-tex/chktex -doc dev-util/gtk-doc highlight vim -dev-util/strace aio +dev-util/strace aio unwind dev-vcs/git highlight tk dev-vcs/gitg -python_targets_python3_3 python_targets_python3_4 @@ -189,7 +192,7 @@ media-gfx/dcraw gimp media-gfx/exiv2 contrib xmp media-gfx/gimp gimpprint smp media-gfx/graphicsmagick fpx -media-gfx/graphviz pango +media-gfx/graphviz devil gdk-pixbuf gts pango media-gfx/imagemagick autotrace corefonts fftw fpx gs hdri lqr mpeg pango raw webp media-gfx/inkscape dia gs inkjar postscript media-gfx/pstoedit emf @@ -223,7 +226,7 @@ media-libs/xine-lib fusion vdr xvmc media-libs/xvid pic media-plugins/audacious-plugins adplug bs2b cue fluidsynth gtk -gtk3 icecast midi projectm scrobbler tta -media-plugins/grilo-plugins tracker upnp-av +media-plugins/grilo-plugins subtitles tracker upnp-av media-plugins/gst-plugins-meta http libvisual media-plugins/gst-plugins-meta:1.0 ffmpeg http libvisual @@ -233,7 +236,7 @@ media-sound/amarok cdaudio cdda daap ifp ipod mp3tunes mp4 njb visualization media-sound/audacious gtk -gtk3 chardet # media-sound/easytag wavpack media-sound/jack-audio-connection-kit jack-tmpfs netjack -media-sound/pulseaudio asyncns equalizer +media-sound/pulseaudio asyncns equalizer native-headset ofono-headset media-sound/sox amrnb amrwb media-video/dvdrip subtitles @@ -354,7 +357,7 @@ www-apps/egroupware gallery www-apps/syscp aps autoresponder billing bind domainkey fcgid mailquota www-client/elinks finger gopher -ruby -www-client/firefox mozdevelop system-jpeg system-sqlite wifi xforms +www-client/firefox egl mozdevelop system-jpeg system-sqlite wifi xforms www-client/opera -qt3 www-servers/apache sni suexec -threads diff --git a/postfix/main.cf b/postfix/main.cf index 38714de1..6b000688 100644 --- a/postfix/main.cf +++ b/postfix/main.cf @@ -664,7 +664,7 @@ setgid_group = postdrop # html_directory: The location of the Postfix HTML documentation. # -html_directory = /usr/share/doc/postfix-3.0.1-r1/html +html_directory = /usr/share/doc/postfix-3.0.2/html # manpage_directory: The location of the Postfix on-line manual pages. # @@ -677,7 +677,7 @@ sample_directory = /etc/postfix # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme +readme_directory = /usr/share/doc/postfix-3.0.2/readme # inet_protocols = ipv4 meta_directory = /etc/postfix shlib_directory = /usr/lib64/postfix/${mail_version} diff --git a/postfix/postfix-files b/postfix/postfix-files index 0520ce03..e80ff601 100644 --- a/postfix/postfix-files +++ b/postfix/postfix-files @@ -264,6 +264,7 @@ $readme_directory/BACKSCATTER_README:f:root:-:644 $readme_directory/BASIC_CONFIGURATION_README:f:root:-:644 $readme_directory/BUILTIN_FILTER_README:f:root:-:644 $readme_directory/CDB_README:f:root:-:644 +$readme_directory/COMPATIBILITY_README:f:root:-:644 $readme_directory/CONNECTION_CACHE_README:f:root:-:644 $readme_directory/CONTENT_INSPECTION_README:f:root:-:644 $readme_directory/DATABASE_README:f:root:-:644 @@ -321,6 +322,7 @@ $html_directory/BACKSCATTER_README.html:f:root:-:644 $html_directory/BASIC_CONFIGURATION_README.html:f:root:-:644 $html_directory/BUILTIN_FILTER_README.html:f:root:-:644 $html_directory/CDB_README.html:f:root:-:644 +$html_directory/COMPATIBILITY_README.html:f:root:-:644 $html_directory/CONNECTION_CACHE_README.html:f:root:-:644 $html_directory/CONTENT_INSPECTION_README.html:f:root:-:644 $html_directory/CYRUS_README.html:f:root:-:644:o diff --git a/postfix/saslpass b/postfix/saslpass index 3ccf36d8..cfa2d052 100644 --- a/postfix/saslpass +++ b/postfix/saslpass @@ -1,3 +1,3 @@ -# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/smtp.pass,v 1.2 2004/07/18 03:26:56 dragonheart Exp $ +# $Id$ # # remotehost user:password diff --git a/profile.d/vte-2.91.sh b/profile.d/vte-2.91.sh index 95d20c7d..2d211caa 100644 --- a/profile.d/vte-2.91.sh +++ b/profile.d/vte-2.91.sh @@ -46,7 +46,7 @@ __vte_ps1() { } __vte_osc7 () { - printf "\033]7;file://%s%s\a" "${HOSTNAME:-}" "$(__vte_urlencode "${PWD}")" + printf "\033]7;file://%s%s\007" "${HOSTNAME:-}" "$(__vte_urlencode "${PWD}")" } __vte_prompt_command() { @@ -57,7 +57,7 @@ __vte_prompt_command() { case "$TERM" in xterm*|vte*) - [ -n "$BASH_VERSION" ] && PROMPT_COMMAND="__vte_prompt_command" + [ -n "$BASH_VERSION" ] && PROMPT_COMMAND="__vte_prompt_command" [ -n "$ZSH_VERSION" ] && precmd_functions+=(__vte_osc7) ;; esac diff --git a/profile.env b/profile.env index cd9eb9b1..6fbe1e52 100644 --- a/profile.env +++ b/profile.env @@ -12,8 +12,7 @@ export GCC_SPECS='' export GSETTINGS_BACKEND='dconf' export GUILE_LOAD_PATH='/usr/share/guile/1.8' export HG='/usr/bin/hg' -export INFOPATH='/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.5/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/info' -export JAVACC_HOME='/usr/share/javacc/' +export INFOPATH='/usr/share/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.9.3/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.25.1/info' export LANG='de_DE.UTF-8' export LC_ADDRESS='de_DE.utf8' export LC_COLLATE='de_DE.utf8' @@ -30,16 +29,16 @@ export LC_TIME='de_DE.utf8' export LESS='-R -M --shift 5' export LESSOPEN='|lesspipe %s' export LIBBLURAY_CP='/usr/share/libbluray/lib/libbluray.jar' -export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.8.5/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.24/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.6/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/' +export MANPATH='/usr/local/share/man:/usr/share/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.9.3/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.25.1/man:/etc/java-config-2/current-system-vm/man/:/usr/lib64/php5.6/man/:/usr/share/postgresql/man/:/usr/share/postgresql-9.4/man/' export MULTIOSDIRS='../lib64:../lib32' export OPENGL_PROFILE='xorg-x11' export PAGER='/usr/bin/less' -export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.5:/usr/lib64/subversion/bin:/usr/games/bin' +export PATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.9.3:/usr/lib64/subversion/bin:/usr/games/bin' export PRELINK_PATH_MASK='/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so:/usr/lib32/libfreebl3.so:/usr/lib32/libnssdbm3.so:/usr/lib32/libsoftokn3.so:/usr/bin/evolution' export PYTHONDOCS_2_7='/usr/share/doc/python-docs-2.7.8/html/library' export QT_GRAPHICSSYSTEM='raster' export QT_PLUGIN_PATH='/usr/lib64/kde4/plugins' -export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.8.5:/usr/lib64/subversion/bin' +export ROOTPATH='/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.9.3:/usr/lib64/subversion/bin' export R_HOME='/usr/lib64/R' export VBOX_APP_HOME='/usr/lib64/virtualbox' export XDG_CONFIG_DIRS='/etc/xdg' diff --git a/pulse/client.conf b/pulse/client.conf index 342395d5..7a428f7e 100644 --- a/pulse/client.conf +++ b/pulse/client.conf @@ -11,9 +11,7 @@ # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 -# USA. +# along with PulseAudio; if not, see . ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for ## more information. Default values are commented out. Use either ; or # for diff --git a/pulse/daemon.conf b/pulse/daemon.conf index 27d85418..c04c3655 100644 --- a/pulse/daemon.conf +++ b/pulse/daemon.conf @@ -11,9 +11,7 @@ # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 -# USA. +# along with PulseAudio; if not, see . ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for @@ -71,7 +69,7 @@ ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 -; rlimit-rttime = 1000000 +; rlimit-rttime = 200000 ; default-sample-format = s16le ; default-sample-rate = 44100 diff --git a/pulse/default.pa b/pulse/default.pa index 46d45059..e53b5684 100644 --- a/pulse/default.pa +++ b/pulse/default.pa @@ -13,8 +13,7 @@ # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. +# along with PulseAudio; if not, see . # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) @@ -22,10 +21,10 @@ .nofail ### Load something into the sample cache -#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav -#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav -#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav -#load-sample-lazy pulse-access /usr/share/sounds/generic.wav +#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga +#load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga +#load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga +#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga .fail @@ -146,7 +145,7 @@ load-module module-filter-apply # can be shared by multiple sessions. ### Load X11 bell module -#load-module module-x11-bell sample=bell-windowing-system +#load-module module-x11-bell sample=x11-bell ### Register ourselves in the X11 session manager #load-module module-x11-xsmp diff --git a/pulse/system.pa b/pulse/system.pa index fd43f5ab..903aa390 100644 --- a/pulse/system.pa +++ b/pulse/system.pa @@ -13,8 +13,7 @@ # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. +# along with PulseAudio; if not, see . # This startup script is used only if PulseAudio is started in system # mode. diff --git a/qemu/target-x86_64.conf b/qemu/target-x86_64.conf deleted file mode 100644 index e69de29b..00000000 diff --git a/revdep-rebuild/61-icedtea-bin-6 b/revdep-rebuild/61-icedtea-bin-6 new file mode 100644 index 00000000..8634c3e3 --- /dev/null +++ b/revdep-rebuild/61-icedtea-bin-6 @@ -0,0 +1 @@ +SEARCH_DIRS_MASK="/opt/icedtea-bin-6.1.13.8" diff --git a/revdep-rebuild/61-icedtea-bin-7 b/revdep-rebuild/61-icedtea-bin-7 new file mode 100644 index 00000000..da9feb64 --- /dev/null +++ b/revdep-rebuild/61-icedtea-bin-7 @@ -0,0 +1 @@ +SEARCH_DIRS_MASK="/opt/icedtea-bin-7.2.6.1" diff --git a/sandbox.d/20icedtea-bin-6 b/sandbox.d/20icedtea-bin-6 new file mode 100644 index 00000000..3001f3cf --- /dev/null +++ b/sandbox.d/20icedtea-bin-6 @@ -0,0 +1 @@ +SANDBOX_PREDICT="/proc/self/coredump_filter" diff --git a/sandbox.d/20icedtea-bin-7 b/sandbox.d/20icedtea-bin-7 new file mode 100644 index 00000000..3001f3cf --- /dev/null +++ b/sandbox.d/20icedtea-bin-7 @@ -0,0 +1 @@ +SANDBOX_PREDICT="/proc/self/coredump_filter" diff --git a/sasl2/smtpd.conf b/sasl2/smtpd.conf index c5320e7e..e29b040c 100644 --- a/sasl2/smtpd.conf +++ b/sasl2/smtpd.conf @@ -1,3 +1,3 @@ -# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/smtp.sasl,v 1.3 2011/05/09 12:36:20 eras Exp $ +# $Id$ pwcheck_method:saslauthd mech_list: PLAIN diff --git a/security/capability.conf b/security/capability.conf index dd93ea74..09517f8e 100644 --- a/security/capability.conf +++ b/security/capability.conf @@ -8,7 +8,7 @@ # and thus you'll know about Linux's capability support. # [If you don't know about libcap, the sources for it are here: # -# http://linux.kernel.org/pub/linux/libs/security/linux-privs/ +# http://www.kernel.org/pub/linux/libs/security/linux-privs/ # # .] # diff --git a/security/pwquality.conf b/security/pwquality.conf index cec450f7..75e8db8b 100644 --- a/security/pwquality.conf +++ b/security/pwquality.conf @@ -3,31 +3,31 @@ # # Number of characters in the new password that must not be present in the # old password. -# difok = 5 +# difok = 1 # # Minimum acceptable size for the new password (plus one if # credits are not disabled which is the default). (See pam_cracklib manual.) # Cannot be set to lower value than 6. -# minlen = 9 +# minlen = 8 # # The maximum credit for having digits in the new password. If less than 0 # it is the minimum number of digits in the new password. -# dcredit = 1 +# dcredit = 0 # # The maximum credit for having uppercase characters in the new password. # If less than 0 it is the minimum number of uppercase characters in the new # password. -# ucredit = 1 +# ucredit = 0 # # The maximum credit for having lowercase characters in the new password. # If less than 0 it is the minimum number of lowercase characters in the new # password. -# lcredit = 1 +# lcredit = 0 # # The maximum credit for having other characters in the new password. # If less than 0 it is the minimum number of other characters in the new # password. -# ocredit = 1 +# ocredit = 0 # # The minimum number of required classes of characters for the new # password (digits, uppercase, lowercase, others). diff --git a/sgml/catalog b/sgml/catalog index ed6e8ebf..87000c83 100644 --- a/sgml/catalog +++ b/sgml/catalog @@ -15,4 +15,3 @@ CATALOG "/etc/sgml/sgml-docbook-4.0.cat" CATALOG "/etc/sgml/xml-simple-docbook-4.1.2.4.cat" CATALOG "/etc/sgml/xml-simple-docbook-1.0.cat" CATALOG "/etc/sgml/xhtml1.cat" -CATALOG "/etc/sgml/linuxdoc.cat" diff --git a/sgml/linuxdoc.cat b/sgml/linuxdoc.cat deleted file mode 100644 index fc0c94d0..00000000 --- a/sgml/linuxdoc.cat +++ /dev/null @@ -1 +0,0 @@ -CATALOG "/usr/share/linuxdoc-tools/linuxdoc-tools.catalog" diff --git a/udev/hwdb.bin b/udev/hwdb.bin index 9d75d10f..8973353c 100644 Binary files a/udev/hwdb.bin and b/udev/hwdb.bin differ diff --git a/vde2/libvdemgmt/asyncrecv.rc b/vde2/libvdemgmt/asyncrecv.rc new file mode 100644 index 00000000..8ad6d215 --- /dev/null +++ b/vde2/libvdemgmt/asyncrecv.rc @@ -0,0 +1,12 @@ +TIMEOUT 1000 +1 IN '\n' 100 +2 IF '30' 10 +3 GOTO 100 + +10 COPY +11 SKIP 2 +12 RVATOI 8 +13 EXITRV + +100 EXIT -1 + diff --git a/vde2/libvdemgmt/closemachine.rc b/vde2/libvdemgmt/closemachine.rc new file mode 100644 index 00000000..3cffc739 --- /dev/null +++ b/vde2/libvdemgmt/closemachine.rc @@ -0,0 +1,2 @@ +1 SEND 'logout\n' +2 EXIT 0 diff --git a/vde2/libvdemgmt/openmachine.rc b/vde2/libvdemgmt/openmachine.rc new file mode 100644 index 00000000..084605e5 --- /dev/null +++ b/vde2/libvdemgmt/openmachine.rc @@ -0,0 +1,6 @@ +TIMEOUT 1000 +1 IN '$ ' 100 +2 COPY +3 EXIT 0 + +100 EXIT -1 diff --git a/vde2/libvdemgmt/sendcmd.rc b/vde2/libvdemgmt/sendcmd.rc new file mode 100644 index 00000000..7b037b58 --- /dev/null +++ b/vde2/libvdemgmt/sendcmd.rc @@ -0,0 +1,40 @@ +TIMEOUT 1000 +1 SEND '$*\n' +2 THROW +3 IN '\n' 100 +4 IF '30' 10 +5 IF '10' 20 +6 IF '0000 DATA END WITH \'.\'' 30 +7 GOTO 2 + +10 SKIP 5 +11 COPY +13 OUTTAG 3 +14 OUTSHIFT +15 GOTO 2 + +20 SKIP 2 +21 RVATOI +22 THROW +23 IN '$ ' 100 +24 IF '30' 40 +25 EXITRV + +30 THROW +31 IN '\n' 100 +32 IF '.\n' 35 +33 COPY +34 GOTO 30 +35 OUTTAG 1 +36 OUTSHIFT +37 GOTO 2 + +40 SKIP 5 +41 COPY +42 OUTTAG 3 +43 OUTSHIFT +44 SKIP '\n' +45 GOTO 24 + +100 EXIT -1 + diff --git a/vde2/vdecmd b/vde2/vdecmd new file mode 100644 index 00000000..c588f307 --- /dev/null +++ b/vde2/vdecmd @@ -0,0 +1,17 @@ +TIMEOUT 1000 +1 IN '$ ' 100 +3 SEND '$*\n' +5 THROW +6 IN '\n' 100 +7 IF '0000 DATA END WITH \'.\'' 10 +8 IF '10' 20 +9 GOTO 100 +10 THROW +11 IN '\n' 100 +12 IF '.\n' 5 +13 COPY +14 GOTO 10 +20 SKIP 2 +21 SEND 'logout\n' +22 EXITATOI +100 EXIT -1 diff --git a/vhosts/webapp-config b/vhosts/webapp-config index b93c3143..da01bc65 100644 --- a/vhosts/webapp-config +++ b/vhosts/webapp-config @@ -69,6 +69,7 @@ vhost_hostname="localhost" # cherokee # nginx # gatling +# tracd # # you can override this setting by using the -s switch to webapp-config diff --git a/wgetrc b/wgetrc index bd4b6a2e..9a73ada1 100644 --- a/wgetrc +++ b/wgetrc @@ -16,6 +16,9 @@ ## To use the settings in this file, you will have to uncomment them, ## as well as change them, in most cases, as the values on the ## commented-out lines are the default values (e.g. "off"). +## +## Command are case-, underscore- and minus-insensitive. +## For example ftp_proxy, ftp-proxy and ftpproxy are the same. ## @@ -122,7 +125,7 @@ #iri = off # Force the default system encoding -#locale = UTF-8 +#localencoding = UTF-8 # Force the default remote server encoding #remoteencoding = UTF-8 diff --git a/xdg/autostart/evolution-alarm-notify.desktop b/xdg/autostart/evolution-alarm-notify.desktop index 3f510cf2..bf7734d7 100644 --- a/xdg/autostart/evolution-alarm-notify.desktop +++ b/xdg/autostart/evolution-alarm-notify.desktop @@ -11,7 +11,7 @@ Comment[en_GB]=Calendar event notifications Comment[ru]=Уведомления о календарных событиях Comment[vi]=Thông tin lịch Icon=appointment-soon -Exec=/usr/libexec/evolution/3.12/evolution-alarm-notify +Exec=/usr/libexec/evolution/evolution-alarm-notify Terminal=false Type=Application Categories= @@ -20,4 +20,4 @@ X-Meego-Priority=Low X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=evolution X-GNOME-Bugzilla-Component=calendar -X-GNOME-Bugzilla-Version=3.12.x +X-GNOME-Bugzilla-Version=3.16.x diff --git a/xdg/autostart/gnome-keyring-gpg.desktop b/xdg/autostart/gnome-keyring-gpg.desktop index 352f135d..206c6aa4 100644 --- a/xdg/autostart/gnome-keyring-gpg.desktop +++ b/xdg/autostart/gnome-keyring-gpg.desktop @@ -9,7 +9,7 @@ Comment=GNOME Keyring: GPG Agent Comment[de]=GNOME-Schlüsselbunddienst: GPG-Agent Comment[en_GB]=GNOME Keyring: GPG Agent Comment[ru]=Связка ключей GNOME: GPG-агент -Comment[vi]=Vòng Khoá GNOME: GPG Agent +Comment[vi]=Chùm chìa khóa GNOME: Đại diện GPG Exec=/usr/bin/gnome-keyring-daemon --start --components=gpg OnlyShowIn=GNOME;Unity;MATE; X-GNOME-Autostart-Phase=Initialization @@ -18,4 +18,4 @@ X-GNOME-Autostart-Notify=true X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=gnome-keyring X-GNOME-Bugzilla-Component=general -X-GNOME-Bugzilla-Version=3.14.0 +X-GNOME-Bugzilla-Version=3.16.0 diff --git a/xdg/autostart/gnome-keyring-pkcs11.desktop b/xdg/autostart/gnome-keyring-pkcs11.desktop index c39737a5..c97029dd 100644 --- a/xdg/autostart/gnome-keyring-pkcs11.desktop +++ b/xdg/autostart/gnome-keyring-pkcs11.desktop @@ -4,12 +4,12 @@ Name=Certificate and Key Storage Name[de]=Zertifikat-/Schlüsselverwahrung Name[en_GB]=Certificate and Key Storage Name[ru]=Хранилище сертификатов и ключей -Name[vi]=Lưu trữ Chứng nhận và Khoá +Name[vi]=Lưu trữ Chứng nhận và khóa Comment=GNOME Keyring: PKCS#11 Component Comment[de]=GNOME-Schlüsselbunddienst: PKCS#11-Komponente Comment[en_GB]=GNOME Keyring: PKCS#11 Component Comment[ru]=Связка ключей GNOME: компонент PKCS#11 -Comment[vi]=Vòng Khoá GNOME: thành phần PKCS#11 +Comment[vi]=Chùm chìa khóa GNOME: thành phần PKCS#11 Exec=/usr/bin/gnome-keyring-daemon --start --components=pkcs11 OnlyShowIn=GNOME;Unity;MATE; X-GNOME-Autostart-Phase=Initialization @@ -18,4 +18,4 @@ X-GNOME-Autostart-Notify=true X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=gnome-keyring X-GNOME-Bugzilla-Component=general -X-GNOME-Bugzilla-Version=3.14.0 +X-GNOME-Bugzilla-Version=3.16.0 diff --git a/xdg/autostart/gnome-keyring-secrets.desktop b/xdg/autostart/gnome-keyring-secrets.desktop index 29eb3b38..239535dd 100644 --- a/xdg/autostart/gnome-keyring-secrets.desktop +++ b/xdg/autostart/gnome-keyring-secrets.desktop @@ -4,12 +4,12 @@ Name=Secret Storage Service Name[de]=Sicherheitsdienst Name[en_GB]=Secret Storage Service Name[ru]=Служба безопасного хранения -Name[vi]=Dịch vụ lưu trữ mật +Name[vi]=Dịch vụ lưu trữ bảo mật Comment=GNOME Keyring: Secret Service Comment[de]=GNOME-Schlüsselbunddienst: Sicherheitsdienst Comment[en_GB]=GNOME Keyring: Secret Service Comment[ru]=Связка ключей GNOME: служба безопасности -Comment[vi]=Vòng Khoá GNOME: dịch vụ mật +Comment[vi]=Chùm chìa khóa GNOME: dịch vụ bảo mật Exec=/usr/bin/gnome-keyring-daemon --start --components=secrets OnlyShowIn=GNOME;Unity;MATE; X-GNOME-Autostart-Phase=Initialization @@ -18,4 +18,4 @@ X-GNOME-Autostart-Notify=true X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=gnome-keyring X-GNOME-Bugzilla-Component=general -X-GNOME-Bugzilla-Version=3.14.0 +X-GNOME-Bugzilla-Version=3.16.0 diff --git a/xdg/autostart/gnome-keyring-ssh.desktop b/xdg/autostart/gnome-keyring-ssh.desktop index bc01fa7d..3b540e20 100644 --- a/xdg/autostart/gnome-keyring-ssh.desktop +++ b/xdg/autostart/gnome-keyring-ssh.desktop @@ -4,12 +4,12 @@ Name=SSH Key Agent Name[de]=SSH-Schlüsselagent Name[en_GB]=SSH Key Agent Name[ru]=Агент ключей SSH -Name[vi]=Tác nhân khoá SSH +Name[vi]=Đại diện khóa SSH Comment=GNOME Keyring: SSH Agent Comment[de]=GNOME-Schlüsselbunddienst: SSH-Agent Comment[en_GB]=GNOME Keyring: SSH Agent Comment[ru]=Связка ключей GNOME: SSH-агент -Comment[vi]=Vòng Khoá GNOME: SSH Agent +Comment[vi]=Chùm chìa khóa GNOME: Đại diện SSH Exec=/usr/bin/gnome-keyring-daemon --start --components=ssh OnlyShowIn=GNOME;Unity;MATE; X-GNOME-Autostart-Phase=Initialization @@ -18,4 +18,4 @@ X-GNOME-Autostart-Notify=true X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=gnome-keyring X-GNOME-Bugzilla-Component=general -X-GNOME-Bugzilla-Version=3.14.0 +X-GNOME-Bugzilla-Version=3.16.0 diff --git a/xdg/autostart/gnome-settings-daemon.desktop b/xdg/autostart/gnome-settings-daemon.desktop index f5ece3e2..6bf02080 100644 --- a/xdg/autostart/gnome-settings-daemon.desktop +++ b/xdg/autostart/gnome-settings-daemon.desktop @@ -4,7 +4,7 @@ Name=GNOME Settings Daemon Name[de]=GNOME-Einstellungsdienst Name[en_GB]=GNOME Settings Daemon Name[ru]=Служба параметров GNOME -Name[vi]=Trình nền Thiết lập GNOME +Name[vi]=Trình nền cài đặt GNOME Exec=/usr/libexec/gnome-settings-daemon-localeexec OnlyShowIn=GNOME; NoDisplay=true diff --git a/xdg/autostart/pulseaudio-kde.desktop b/xdg/autostart/pulseaudio-kde.desktop deleted file mode 100644 index 7ebbd047..00000000 --- a/xdg/autostart/pulseaudio-kde.desktop +++ /dev/null @@ -1,12 +0,0 @@ -[Desktop Entry] -Version=1.0 -Name=PulseAudio Sound System KDE Routing Policy -Name[ru]=Звуковая система PulseAudio с маршрутизацией для KDE -Comment=Start the PulseAudio Sound System with KDE Routing Policy -Comment[ru]=Запуск звуковой системы PulseAudio с маршрутизацией для KDE -Exec=start-pulseaudio-kde -Terminal=false -Type=Application -Categories= -GenericName= -OnlyShowIn=KDE; diff --git a/xdg/autostart/pulseaudio.desktop b/xdg/autostart/pulseaudio.desktop index 2d8a79f6..51eeac86 100644 --- a/xdg/autostart/pulseaudio.desktop +++ b/xdg/autostart/pulseaudio.desktop @@ -12,3 +12,4 @@ Type=Application Categories= GenericName= X-GNOME-Autostart-Phase=Initialization +X-KDE-autostart-phase=1 diff --git a/xdg/autostart/tracker-extract.desktop b/xdg/autostart/tracker-extract.desktop index bd5b5f3f..6f44a062 100644 --- a/xdg/autostart/tracker-extract.desktop +++ b/xdg/autostart/tracker-extract.desktop @@ -20,4 +20,4 @@ OnlyShowIn=GNOME;KDE;XFCE;X-MEEGO-HS;X-MEEGO-NB;X-IVI;Unity; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=tracker X-GNOME-Bugzilla-Component=Extractor -X-GNOME-Bugzilla-Version=1.2.6 +X-GNOME-Bugzilla-Version=1.4.1 diff --git a/xdg/autostart/tracker-miner-apps.desktop b/xdg/autostart/tracker-miner-apps.desktop index af033b43..8ceb8f3c 100644 --- a/xdg/autostart/tracker-miner-apps.desktop +++ b/xdg/autostart/tracker-miner-apps.desktop @@ -20,4 +20,4 @@ OnlyShowIn=GNOME;KDE;XFCE;X-MEEGO-HS;X-MEEGO-NB;X-IVI;Unity; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=tracker X-GNOME-Bugzilla-Component=Miners -X-GNOME-Bugzilla-Version=1.2.6 +X-GNOME-Bugzilla-Version=1.4.1 diff --git a/xdg/autostart/tracker-miner-fs.desktop b/xdg/autostart/tracker-miner-fs.desktop index 80b4f25d..b5d3b050 100644 --- a/xdg/autostart/tracker-miner-fs.desktop +++ b/xdg/autostart/tracker-miner-fs.desktop @@ -22,4 +22,4 @@ OnlyShowIn=GNOME;KDE;XFCE;X-MEEGO-HS;X-MEEGO-NB;X-IVI;Unity; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=tracker X-GNOME-Bugzilla-Component=Miners -X-GNOME-Bugzilla-Version=1.2.6 +X-GNOME-Bugzilla-Version=1.4.1 diff --git a/xdg/autostart/tracker-miner-user-guides.desktop b/xdg/autostart/tracker-miner-user-guides.desktop index 8d967a3a..3ab7770d 100644 --- a/xdg/autostart/tracker-miner-user-guides.desktop +++ b/xdg/autostart/tracker-miner-user-guides.desktop @@ -20,4 +20,4 @@ OnlyShowIn=GNOME;KDE;XFCE;X-MEEGO-HS;X-MEEGO-NB;X-IVI;Unity; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=tracker X-GNOME-Bugzilla-Component=Miners -X-GNOME-Bugzilla-Version=1.2.6 +X-GNOME-Bugzilla-Version=1.4.1 diff --git a/xdg/autostart/tracker-store.desktop b/xdg/autostart/tracker-store.desktop index f2c294d6..43a64d9d 100644 --- a/xdg/autostart/tracker-store.desktop +++ b/xdg/autostart/tracker-store.desktop @@ -21,4 +21,4 @@ OnlyShowIn=GNOME;KDE;XFCE;X-MEEGO-HS;X-MEEGO-NB;X-IVI;Unity; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=tracker X-GNOME-Bugzilla-Component=Store -X-GNOME-Bugzilla-Version=1.2.6 +X-GNOME-Bugzilla-Version=1.4.1