From: Frank Brehm <frank@brehm-online.com>
Date: Mon, 7 May 2012 08:03:44 +0000 (+0200)
Subject: Current state
X-Git-Url: https://git.uhu-banane.org/?a=commitdiff_plain;h=544da6c77860a50f8cf84e116ae5cb144fa3b1d4;p=config%2Fbruni%2Fetc.git

Current state
---

diff --git a/conf.d/lm_sensors b/conf.d/lm_sensors
new file mode 100644
index 00000000..df481432
--- /dev/null
+++ b/conf.d/lm_sensors
@@ -0,0 +1,25 @@
+# Generated by sensors-detect on Wed May  2 22:46:28 2012
+# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
+# be loaded/unloaded.
+#
+# The format of this file is a shell script that simply defines variables:
+# HWMON_MODULES for hardware monitoring driver modules, and optionally
+# BUS_MODULES for any required bus driver module (for example for I2C or SPI).
+
+# Load modules at startup
+LOADMODULES=yes
+
+# Initialize sensors at startup
+INITSENSORS=yes
+
+HWMON_MODULES="it87"
+
+# For compatibility reasons, modules are also listed individually as variables
+#    MODULE_0, MODULE_1, MODULE_2, etc.
+# Please note that the numbers in MODULE_X must start at 0 and increase in
+# steps of 1. Any number that is missing will make the init script skip the
+# rest of the modules. Use MODULE_X_ARGS for arguments.
+#
+# You should use BUS_MODULES and HWMON_MODULES instead if possible.
+
+MODULE_0=it87
diff --git a/cups/printers.conf b/cups/printers.conf
index 485eaa0b..e69de29b 100644
--- a/cups/printers.conf
+++ b/cups/printers.conf
@@ -1,39 +0,0 @@
-# Printer configuration file for CUPS v1.4.8
-# Written by cupsd on 2012-04-25 08:27
-# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
-<DefaultPrinter FS-1020D>
-Info Kyocera FS-1020D
-Location bruni
-MakeModel Kyocera FS-1020D - CUPS+Gutenprint v5.2.7
-DeviceURI usb://Kyocera/FS-1020D
-State Idle
-StateTime 1326840725
-Type 4116
-Filter application/vnd.cups-raw 0 -
-Filter application/vnd.cups-raster 100 rastertogutenprint.5.2
-Accepting Yes
-Shared Yes
-JobSheets none none
-QuotaPeriod 0
-PageLimit 0
-KLimit 0
-OpPolicy default
-ErrorPolicy stop-printer
-</Printer>
-<Printer Virtual_Printer>
-Info PDF Printer
-Location Local Printer
-MakeModel Apple LaserWriter 4/600 Foomatic/Postscript (recommended)
-DeviceURI cups-pdf:/
-State Idle
-StateTime 1264666962
-Type 8388612
-Accepting Yes
-Shared Yes
-JobSheets none none
-QuotaPeriod 0
-PageLimit 0
-KLimit 0
-OpPolicy default
-ErrorPolicy stop-printer
-</Printer>
diff --git a/runlevels/default/lm_sensors b/runlevels/default/lm_sensors
new file mode 120000
index 00000000..46443253
--- /dev/null
+++ b/runlevels/default/lm_sensors
@@ -0,0 +1 @@
+/etc/init.d/lm_sensors
\ No newline at end of file