From: Frank Brehm Date: Thu, 12 Oct 2017 20:35:08 +0000 (+0200) Subject: saving uncommitted changes in /etc prior to emerge run X-Git-Url: https://git.uhu-banane.org/?a=commitdiff_plain;h=3a149d4c62e88555fbe1af392b7ad7f6617d6f0e;p=config%2Fbruni%2Fetc.git saving uncommitted changes in /etc prior to emerge run --- diff --git a/config-archive/etc/rc.conf b/config-archive/etc/rc.conf index 0f23b177..1b38d5c1 100644 --- a/config-archive/etc/rc.conf +++ b/config-archive/etc/rc.conf @@ -183,6 +183,11 @@ rc_local_after="mta" #rc_sys="" rc_sys="" +# if you use openrc-init, which is currently only available on Linux, +# this is the default runlevel to activate after "sysinit" and "boot" +# when booting. +#rc_default_runlevel="default" + # on Linux and Hurd, this is the number of ttys allocated for logins # It is used in the consolefont, keymaps, numlock and termencoding # service scripts. diff --git a/config-archive/etc/rc.conf.1 b/config-archive/etc/rc.conf.1 index d0b59855..0f23b177 100644 --- a/config-archive/etc/rc.conf.1 +++ b/config-archive/etc/rc.conf.1 @@ -7,8 +7,8 @@ # WARNING: whilst we have improved parallel, it can still potentially lock # the boot process. Don't file bugs about this unless you can supply # patches that fix it without breaking other things! +#rc_parallel="NO" rc_parallel="NO" -#rc_parallel="YES" # Set rc_interactive to "YES" and you'll be able to press the I key during # boot so you can choose to start specific services. Set to "NO" to disable @@ -119,6 +119,9 @@ unicode="YES" # Some daemons are started and stopped via start-stop-daemon. # We can set some things on a per service basis, like the nicelevel. #SSD_NICELEVEL="-19" +# Or the ionice level. The format is class[:data] , just like the +# --ionice start-stop-daemon parameter. +#SSD_IONICELEVEL="2:2" # Pass ulimit parameters # If you are using bash in POSIX mode for your shell, note that the @@ -150,36 +153,43 @@ unicode="YES" rc_local_after="mta" # You can also remove dependencies. -# This is mainly used for saying which servies do NOT provide net. +# This is mainly used for saying which services do NOT provide net. #rc_net_tap0_provide="!net" -############################################################################## -# LINUX SPECIFIC OPTIONS - -# This is the subsystem type. Valid options on Linux: +# This is the subsystem type. +# It is used to match against keywords set by the keyword call in the +# depend function of service scripts. +# +# It should be set to the value representing the environment this file is +# PRESENTLY in, not the virtualization the environment is capable of. +# If it is commented out, automatic detection will be used. +# +# The list below shows all possible settings as well as the host +# operating systems where they can be used and autodetected. +# # "" - nothing special -# "docker" - Docker container manager +# "docker" - Docker container manager (Linux) +# "jail" - Jail (DragonflyBSD or FreeBSD) # "lxc" - Linux Containers # "openvz" - Linux OpenVZ # "prefix" - Prefix -# "rkt" - CoreOS container management system +# "rkt" - CoreOS container management system (Linux) +# "subhurd" - Hurd subhurds (to be checked) +# "systemd-nspawn" - Container created by systemd-nspawn (Linux) # "uml" - Usermode Linux # "vserver" - Linux vserver -# "systemd-nspawn" - Container created by the systemd-nspawn utility -# "xen0" - Xen0 Domain -# "xenU" - XenU Domain -# If this is commented out, automatic detection will be used. -# -# This should be set to the value representing the environment this file is -# PRESENTLY in, not the virtualization the environment is capable of. +# "xen0" - Xen0 Domain (Linux and NetBSD) +# "xenU" - XenU Domain (Linux and NetBSD) +#rc_sys="" rc_sys="" -# This is the number of tty's used in most of the rc-scripts (like -# consolefont, numlock, etc ...) +# on Linux and Hurd, this is the number of ttys allocated for logins +# It is used in the consolefont, keymaps, numlock and termencoding +# service scripts. rc_tty_number=12 ############################################################################## -# CGROUPS RESOURCE MANAGEMENT +# LINUX CGROUPS RESOURCE MANAGEMENT # If you have cgroups turned on in your kernel, this switch controls # whether or not a group for each controller is mounted under @@ -234,7 +244,7 @@ rc_tty_number=12 # Set the pids controller settings for this service. #rc_cgroup_pids="" -# Set this to YES if yu want all of the processes in a service's cgroup +# Set this to YES if you want all of the processes in a service's cgroup # killed when the service is stopped or restarted. # This should not be set globally because it kills all of the service's # child processes, and most of the time this is undesirable. Please set diff --git a/config-archive/etc/rc.conf.2 b/config-archive/etc/rc.conf.2 index 09d38762..d0b59855 100644 --- a/config-archive/etc/rc.conf.2 +++ b/config-archive/etc/rc.conf.2 @@ -31,17 +31,20 @@ rc_shell=/sbin/sulogin # come up. #rc_depend_strict="YES" -# rc_hotplug is a list of services that we allow to be hotplugged. -# By default we do not allow hotplugging. +# rc_hotplug controls which services we allow to be hotplugged. # A hotplugged service is one started by a dynamic dev manager when a matching # hardware device is found. -# This service is intrinsically included in the boot runlevel. -# To disable services, prefix with a ! +# Hotplugged services appear in the "hotplugged" runlevel. +# If rc_hotplug is set to any value, we compare the name of this service +# to every pattern in the value, from left to right, and we allow the +# service to be hotplugged if it matches a pattern, or if it matches no +# patterns. Patterns can include shell wildcards. +# To disable services from being hotplugged, prefix patterns with "!". +#If rc_hotplug is not set or is empty, all hotplugging is disabled. # Example - rc_hotplug="net.wlan !net.*" -# This allows net.wlan and any service not matching net.* to be plugged. -# Example - rc_hotplug="*" -# This allows all services to be hotplugged -#rc_hotplug="*" +# This allows net.wlan and any service not matching net.* to be hotplugged. +# Example - rc_hotplug="!net.*" +# This allows services that do not match "net.*" to be hotplugged. # rc_logger launches a logging daemon to log the entire rc process to # /var/log/rc.log @@ -155,9 +158,11 @@ rc_local_after="mta" # This is the subsystem type. Valid options on Linux: # "" - nothing special +# "docker" - Docker container manager # "lxc" - Linux Containers # "openvz" - Linux OpenVZ # "prefix" - Prefix +# "rkt" - CoreOS container management system # "uml" - Usermode Linux # "vserver" - Linux vserver # "systemd-nspawn" - Container created by the systemd-nspawn utility diff --git a/config-archive/etc/rc.conf.3 b/config-archive/etc/rc.conf.3 index d75e57d6..09d38762 100644 --- a/config-archive/etc/rc.conf.3 +++ b/config-archive/etc/rc.conf.3 @@ -214,12 +214,21 @@ rc_tty_number=12 # Set the devices controller settings for this service. #rc_cgroup_devices="" +# Set the hugetlb controller settings for this service. +#rc_cgroup_hugetlb="" + # Set the memory controller settings for this service. #rc_cgroup_memory="" +# Set the net_cls controller settings for this service. +#rc_cgroup_net_cls="" + # Set the net_prio controller settings for this service. #rc_cgroup_net_prio="" +# Set the pids controller settings for this service. +#rc_cgroup_pids="" + # Set this to YES if yu want all of the processes in a service's cgroup # killed when the service is stopped or restarted. # This should not be set globally because it kills all of the service's diff --git a/config-archive/etc/rc.conf.4 b/config-archive/etc/rc.conf.4 index 07b2cf34..d75e57d6 100644 --- a/config-archive/etc/rc.conf.4 +++ b/config-archive/etc/rc.conf.4 @@ -118,6 +118,9 @@ unicode="YES" #SSD_NICELEVEL="-19" # Pass ulimit parameters +# If you are using bash in POSIX mode for your shell, note that the +# ulimit command uses a block size of 512 bytes for the -c and -f +# options #rc_ulimit="-u 30" # It's possible to define extra dependencies for services like so @@ -151,14 +154,15 @@ rc_local_after="mta" # LINUX SPECIFIC OPTIONS # This is the subsystem type. Valid options on Linux: -# "" - nothing special -# "lxc" - Linux Containers -# "openvz" - Linux OpenVZ -# "prefix" - Prefix -# "uml" - Usermode Linux -# "vserver" - Linux vserver -# "xen0" - Xen0 Domain -# "xenU" - XenU Domain +# "" - nothing special +# "lxc" - Linux Containers +# "openvz" - Linux OpenVZ +# "prefix" - Prefix +# "uml" - Usermode Linux +# "vserver" - Linux vserver +# "systemd-nspawn" - Container created by the systemd-nspawn utility +# "xen0" - Xen0 Domain +# "xenU" - XenU Domain # If this is commented out, automatic detection will be used. # # This should be set to the value representing the environment this file is diff --git a/config-archive/etc/rc.conf.5 b/config-archive/etc/rc.conf.5 index 8990bad0..07b2cf34 100644 --- a/config-archive/etc/rc.conf.5 +++ b/config-archive/etc/rc.conf.5 @@ -53,6 +53,10 @@ rc_logger="YES" # The default value is: /var/log/rc.log rc_log_path="/var/log/rc.log" +# If you want verbose output for OpenRC, set this to yes. If you want +# verbose output for service foo only, set it to yes in /etc/conf.d/foo. +#rc_verbose=no + # By default we filter the environment for our running scripts. To allow other # variables through, add them here. Use a * to allow all variables through. #rc_env_allow="VAR1 VAR2" @@ -75,6 +79,10 @@ rc_log_path="/var/log/rc.log" #rc_crashed_stop=NO #rc_crashed_start=YES +# Set rc_nocolor to yes if you do not want colors displayed in OpenRC +# output. +#rc_nocolor=NO + ############################################################################## # MISC CONFIGURATION VARIABLES # There variables are shared between many init scripts @@ -88,7 +96,7 @@ unicode="YES" # Below is the default list of network fstypes. # -# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs +# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs # nfs nfs4 ocfs2 shfs smbfs # # If you would like to add to this list, you can do so by adding your diff --git a/config-archive/etc/rc.conf.6 b/config-archive/etc/rc.conf.6 index 388d2e48..8990bad0 100644 --- a/config-archive/etc/rc.conf.6 +++ b/config-archive/etc/rc.conf.6 @@ -7,8 +7,8 @@ # WARNING: whilst we have improved parallel, it can still potentially lock # the boot process. Don't file bugs about this unless you can supply # patches that fix it without breaking other things! -#rc_parallel="NO" -rc_parallel="YES" +rc_parallel="NO" +#rc_parallel="YES" # Set rc_interactive to "YES" and you'll be able to press the I key during # boot so you can choose to start specific services. Set to "NO" to disable @@ -82,6 +82,10 @@ rc_log_path="/var/log/rc.log" # Set unicode to YES to turn on unicode support for keyboards and screens. unicode="YES" +# This is how long fuser should wait for a remote server to respond. The +# default is 60 seconds, but it can be adjusted here. +#rc_fuser_timeout=60 + # Below is the default list of network fstypes. # # afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs @@ -103,7 +107,7 @@ unicode="YES" # Some daemons are started and stopped via start-stop-daemon. # We can set some things on a per service basis, like the nicelevel. -#export SSD_NICELEVEL="-19" +#SSD_NICELEVEL="-19" # Pass ulimit parameters #rc_ulimit="-u 30" @@ -129,6 +133,8 @@ unicode="YES" #rc_foo_bar_need="openvpn" #rc_foo_bar_after="clock" +rc_local_after="mta" + # You can also remove dependencies. # This is mainly used for saying which servies do NOT provide net. #rc_net_tap0_provide="!net" @@ -155,10 +161,59 @@ rc_sys="" # consolefont, numlock, etc ...) rc_tty_number=12 +############################################################################## +# CGROUPS RESOURCE MANAGEMENT + # If you have cgroups turned on in your kernel, this switch controls # whether or not a group for each controller is mounted under # /sys/fs/cgroup. -# Support for process management by cgroups is planned in the future, -# so if you turn this off, be aware that you may not be able to use that -# feature. +# None of the other options in this section work if this is set to "NO". #rc_controller_cgroups="YES" + +# The following settings allow you to set up values for the cgroup +# controllers for your services. +# They can be set in this file;, however, if you do this, the settings +# will apply to all of your services. +# If you want different settings for each service, place the settings in +# /etc/conf.d/foo for service foo. +# The format is to specify the names of the settings followed by their +# values. Each variable can hold multiple settings. +# For example, you would use this to set the cpu.shares setting in the +# cpu controller to 512 for your service. +# rc_cgroup_cpu=" +# cpu.shares 512 +# " +# +#For more information about the adjustments that can be made with +#cgroups, see Documentation/cgroups/* in the linux kernel source tree. + +# Set the blkio controller settings for this service. +#rc_cgroup_blkio="" + +# Set the cpu controller settings for this service. +#rc_cgroup_cpu="" + +# Add this service to the cpuacct controller (any value means yes). +#rc_cgroup_cpuacct="" + +# Set the cpuset controller settings for this service. +#rc_cgroup_cpuset="" + +# Set the devices controller settings for this service. +#rc_cgroup_devices="" + +# Set the memory controller settings for this service. +#rc_cgroup_memory="" + +# Set the net_prio controller settings for this service. +#rc_cgroup_net_prio="" + +# Set this to YES if yu want all of the processes in a service's cgroup +# killed when the service is stopped or restarted. +# This should not be set globally because it kills all of the service's +# child processes, and most of the time this is undesirable. Please set +# it in /etc/conf.d/. +# To perform this cleanup manually for a stopped service, you can +# execute cgroup_cleanup with /etc/init.d/ cgroup_cleanup or +# rc-service cgroup_cleanup. +# rc_cgroup_cleanup="NO" diff --git a/config-archive/etc/rc.conf.7 b/config-archive/etc/rc.conf.7 index 722c40a0..388d2e48 100644 --- a/config-archive/etc/rc.conf.7 +++ b/config-archive/etc/rc.conf.7 @@ -156,7 +156,7 @@ rc_sys="" rc_tty_number=12 # If you have cgroups turned on in your kernel, this switch controls -# whether or not a group for each controler is mounted under +# whether or not a group for each controller is mounted under # /sys/fs/cgroup. # Support for process management by cgroups is planned in the future, # so if you turn this off, be aware that you may not be able to use that diff --git a/config-archive/etc/rc.conf.8 b/config-archive/etc/rc.conf.8 index 9d8afee3..722c40a0 100644 --- a/config-archive/etc/rc.conf.8 +++ b/config-archive/etc/rc.conf.8 @@ -96,6 +96,10 @@ unicode="YES" # These variables are documented here, but should be configured in # /etc/conf.d/foo for service foo and NOT enabled here unless you # really want them to work on a global basis. +# If your service has characters in its name which are not legal in +# shell variable names and you configure the variables for it in this +# file, those characters should be replaced with underscores in the +# variable names as shown below. # Some daemons are started and stopped via start-stop-daemon. # We can set some things on a per service basis, like the nicelevel. @@ -118,6 +122,13 @@ unicode="YES" #rc_foo_need="openvpn" #rc_foo_after="clock" +# Below is an example for service foo-bar. Note that the '-' is illegal +# in a shell variable name, so we convert it to an underscore. +# example for service foo-bar. +#rc_foo_bar_config="/etc/foo-bar" +#rc_foo_bar_need="openvpn" +#rc_foo_bar_after="clock" + # You can also remove dependencies. # This is mainly used for saying which servies do NOT provide net. #rc_net_tap0_provide="!net" @@ -134,9 +145,7 @@ unicode="YES" # "vserver" - Linux vserver # "xen0" - Xen0 Domain # "xenU" - XenU Domain -# If this is commented out, automatic detection will be attempted. -# Note that autodetection will not work in a prefix environment or in a -# linux container. +# If this is commented out, automatic detection will be used. # # This should be set to the value representing the environment this file is # PRESENTLY in, not the virtualization the environment is capable of. @@ -146,3 +155,10 @@ rc_sys="" # consolefont, numlock, etc ...) rc_tty_number=12 +# If you have cgroups turned on in your kernel, this switch controls +# whether or not a group for each controler is mounted under +# /sys/fs/cgroup. +# Support for process management by cgroups is planned in the future, +# so if you turn this off, be aware that you may not be able to use that +# feature. +#rc_controller_cgroups="YES" diff --git a/config-archive/etc/rc.conf.9 b/config-archive/etc/rc.conf.9 new file mode 100644 index 00000000..9d8afee3 --- /dev/null +++ b/config-archive/etc/rc.conf.9 @@ -0,0 +1,148 @@ +# Global OpenRC configuration settings + +# Set to "YES" if you want the rc system to try and start services +# in parallel for a slight speed improvement. When running in parallel we +# prefix the service output with its name as the output will get +# jumbled up. +# WARNING: whilst we have improved parallel, it can still potentially lock +# the boot process. Don't file bugs about this unless you can supply +# patches that fix it without breaking other things! +#rc_parallel="NO" +rc_parallel="YES" + +# Set rc_interactive to "YES" and you'll be able to press the I key during +# boot so you can choose to start specific services. Set to "NO" to disable +# this feature. This feature is automatically disabled if rc_parallel is +# set to YES. +#rc_interactive="YES" +rc_interactive="YES" + +# If we need to drop to a shell, you can specify it here. +# If not specified we use $SHELL, otherwise the one specified in /etc/passwd, +# otherwise /bin/sh +# Linux users could specify /sbin/sulogin +rc_shell=/sbin/sulogin + +# Do we allow any started service in the runlevel to satisfy the dependency +# or do we want all of them regardless of state? For example, if net.eth0 +# and net.eth1 are in the default runlevel then with rc_depend_strict="NO" +# both will be started, but services that depend on 'net' will work if either +# one comes up. With rc_depend_strict="YES" we would require them both to +# come up. +#rc_depend_strict="YES" + +# rc_hotplug is a list of services that we allow to be hotplugged. +# By default we do not allow hotplugging. +# A hotplugged service is one started by a dynamic dev manager when a matching +# hardware device is found. +# This service is intrinsically included in the boot runlevel. +# To disable services, prefix with a ! +# Example - rc_hotplug="net.wlan !net.*" +# This allows net.wlan and any service not matching net.* to be plugged. +# Example - rc_hotplug="*" +# This allows all services to be hotplugged +#rc_hotplug="*" + +# rc_logger launches a logging daemon to log the entire rc process to +# /var/log/rc.log +# NOTE: Linux systems require the devfs service to be started before +# logging can take place and as such cannot log the sysinit runlevel. +rc_logger="YES" + +# Through rc_log_path you can specify a custom log file. +# The default value is: /var/log/rc.log +rc_log_path="/var/log/rc.log" + +# By default we filter the environment for our running scripts. To allow other +# variables through, add them here. Use a * to allow all variables through. +#rc_env_allow="VAR1 VAR2" + +# By default we assume that all daemons will start correctly. +# However, some do not - a classic example is that they fork and return 0 AND +# then child barfs on a configuration error. Or the daemon has a bug and the +# child crashes. You can set the number of milliseconds start-stop-daemon +# waits to check that the daemon is still running after starting here. +# The default is 0 - no checking. +#rc_start_wait=100 + +# rc_nostop is a list of services which will not stop when changing runlevels. +# This still allows the service itself to be stopped when called directly. +#rc_nostop="" + +# rc will attempt to start crashed services by default. +# However, it will not stop them by default as that could bring down other +# critical services. +#rc_crashed_stop=NO +#rc_crashed_start=YES + +############################################################################## +# MISC CONFIGURATION VARIABLES +# There variables are shared between many init scripts + +# Set unicode to YES to turn on unicode support for keyboards and screens. +unicode="YES" + +# Below is the default list of network fstypes. +# +# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs +# nfs nfs4 ocfs2 shfs smbfs +# +# If you would like to add to this list, you can do so by adding your +# own fstypes to the following variable. +#extra_net_fs_list="" + +############################################################################## +# SERVICE CONFIGURATION VARIABLES +# These variables are documented here, but should be configured in +# /etc/conf.d/foo for service foo and NOT enabled here unless you +# really want them to work on a global basis. + +# Some daemons are started and stopped via start-stop-daemon. +# We can set some things on a per service basis, like the nicelevel. +#export SSD_NICELEVEL="-19" + +# Pass ulimit parameters +#rc_ulimit="-u 30" + +# It's possible to define extra dependencies for services like so +#rc_config="/etc/foo" +#rc_need="openvpn" +#rc_use="net.eth0" +#rc_after="clock" +#rc_before="local" +#rc_provide="!net" + +# You can also enable the above commands here for each service. Below is an +# example for service foo. +#rc_foo_config="/etc/foo" +#rc_foo_need="openvpn" +#rc_foo_after="clock" + +# You can also remove dependencies. +# This is mainly used for saying which servies do NOT provide net. +#rc_net_tap0_provide="!net" + +############################################################################## +# LINUX SPECIFIC OPTIONS + +# This is the subsystem type. Valid options on Linux: +# "" - nothing special +# "lxc" - Linux Containers +# "openvz" - Linux OpenVZ +# "prefix" - Prefix +# "uml" - Usermode Linux +# "vserver" - Linux vserver +# "xen0" - Xen0 Domain +# "xenU" - XenU Domain +# If this is commented out, automatic detection will be attempted. +# Note that autodetection will not work in a prefix environment or in a +# linux container. +# +# This should be set to the value representing the environment this file is +# PRESENTLY in, not the virtualization the environment is capable of. +rc_sys="" + +# This is the number of tty's used in most of the rc-scripts (like +# consolefont, numlock, etc ...) +rc_tty_number=12 + diff --git a/config-archive/etc/rc.conf.dist b/config-archive/etc/rc.conf.dist index beafd917..d066c8a9 100644 --- a/config-archive/etc/rc.conf.dist +++ b/config-archive/etc/rc.conf.dist @@ -191,13 +191,43 @@ rc_tty_number=12 ############################################################################## # LINUX CGROUPS RESOURCE MANAGEMENT -# If you have cgroups turned on in your kernel, this switch controls -# whether or not a group for each controller is mounted under -# /sys/fs/cgroup. -# None of the other options in this section work if this is set to "NO". +# This sets the mode used to mount cgroups. +# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and +# cgroups version 1 on /sys/fs/cgroup. +# "legacy" mounts cgroups version 1 on /sys/fs/cgroup +# "unified" mounts cgroups version 2 on /sys/fs/cgroup +#rc_cgroup_mode="hybrid" + +# This is a list of controllers which should be enabled for cgroups version 2. +# If hybrid mode is being used, controllers listed here will not be +# available for cgroups version 1. +# This is a global setting. +#rc_cgroup_controllers="" + +# This variable contains the cgroups version 2 settings for your services. +# If this is set in this file, the settings will apply to all services. +# If you want different settings for each service, place the settings in +# /etc/conf.d/foo for service foo. +# The format is to specify the setting and value followed by a newline. +# Multiple settings and values can be specified. +# For example, you would use this to set the maximum memory and maximum +# number of pids for a service. +#rc_cgroup_settings=" +#memory.max 10485760 +#pids.max max +#" +# +# For more information about the adjustments that can be made with +# cgroups version 2, see Documentation/cgroups-v2.txt in the linux kernel +# source tree. +#rc_cgroup_settings="" + +# This switch controls whether or not cgroups version 1 controllers are +# individually mounted under +# /sys/fs/cgroup in hybrid or legacy mode. #rc_controller_cgroups="YES" -# The following settings allow you to set up values for the cgroup +# The following settings allow you to set up values for the cgroups version 1 # controllers for your services. # They can be set in this file;, however, if you do this, the settings # will apply to all of your services. @@ -211,8 +241,9 @@ rc_tty_number=12 # cpu.shares 512 # " # -#For more information about the adjustments that can be made with -#cgroups, see Documentation/cgroups/* in the linux kernel source tree. +# For more information about the adjustments that can be made with +# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel +# source tree. # Set the blkio controller settings for this service. #rc_cgroup_blkio="" @@ -246,10 +277,33 @@ rc_tty_number=12 # Set this to YES if you want all of the processes in a service's cgroup # killed when the service is stopped or restarted. -# This should not be set globally because it kills all of the service's -# child processes, and most of the time this is undesirable. Please set -# it in /etc/conf.d/. +# Be aware that setting this to yes means all of a service's +# child processes will be killed. Keep this in mind if you set this to +# yes here instead of for the individual services in +# /etc/conf.d/. # To perform this cleanup manually for a stopped service, you can # execute cgroup_cleanup with /etc/init.d/ cgroup_cleanup or # rc-service cgroup_cleanup. +# The process followed in this cleanup is the following: +# 1. send stopsig (sigterm if it isn't set) to all processes left in the +# cgroup immediately followed by sigcont. +# 2. Send sighup to all processes in the cgroup if rc_send_sighup is +# yes. +# 3. delay for rc_timeout_stopsec seconds. +# 4. send sigkill to all processes in the cgroup unless disabled by +# setting rc_send_sigkill to no. # rc_cgroup_cleanup="NO" + +# If this is yes, we will send sighup to the processes in the cgroup +# immediately after stopsig and sigcont. +#rc_send_sighup="NO" + +# This is the amount of time in seconds that we delay after sending sigcont +# and optionally sighup, before we optionally send sigkill to all +# processes in the # cgroup. +# The default is 90 seconds. +#rc_timeout_stopsec="90" + +# If this is set to no, we do not send sigkill to all processes in the +# cgroup. +#rc_send_sigkill="YES" diff --git a/rc.conf b/rc.conf index 1b38d5c1..baf049cb 100644 --- a/rc.conf +++ b/rc.conf @@ -196,13 +196,43 @@ rc_tty_number=12 ############################################################################## # LINUX CGROUPS RESOURCE MANAGEMENT -# If you have cgroups turned on in your kernel, this switch controls -# whether or not a group for each controller is mounted under -# /sys/fs/cgroup. -# None of the other options in this section work if this is set to "NO". +# This sets the mode used to mount cgroups. +# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and +# cgroups version 1 on /sys/fs/cgroup. +# "legacy" mounts cgroups version 1 on /sys/fs/cgroup +# "unified" mounts cgroups version 2 on /sys/fs/cgroup +#rc_cgroup_mode="hybrid" + +# This is a list of controllers which should be enabled for cgroups version 2. +# If hybrid mode is being used, controllers listed here will not be +# available for cgroups version 1. +# This is a global setting. +#rc_cgroup_controllers="" + +# This variable contains the cgroups version 2 settings for your services. +# If this is set in this file, the settings will apply to all services. +# If you want different settings for each service, place the settings in +# /etc/conf.d/foo for service foo. +# The format is to specify the setting and value followed by a newline. +# Multiple settings and values can be specified. +# For example, you would use this to set the maximum memory and maximum +# number of pids for a service. +#rc_cgroup_settings=" +#memory.max 10485760 +#pids.max max +#" +# +# For more information about the adjustments that can be made with +# cgroups version 2, see Documentation/cgroups-v2.txt in the linux kernel +# source tree. +#rc_cgroup_settings="" + +# This switch controls whether or not cgroups version 1 controllers are +# individually mounted under +# /sys/fs/cgroup in hybrid or legacy mode. #rc_controller_cgroups="YES" -# The following settings allow you to set up values for the cgroup +# The following settings allow you to set up values for the cgroups version 1 # controllers for your services. # They can be set in this file;, however, if you do this, the settings # will apply to all of your services. @@ -216,8 +246,9 @@ rc_tty_number=12 # cpu.shares 512 # " # -#For more information about the adjustments that can be made with -#cgroups, see Documentation/cgroups/* in the linux kernel source tree. +# For more information about the adjustments that can be made with +# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel +# source tree. # Set the blkio controller settings for this service. #rc_cgroup_blkio="" @@ -251,10 +282,33 @@ rc_tty_number=12 # Set this to YES if you want all of the processes in a service's cgroup # killed when the service is stopped or restarted. -# This should not be set globally because it kills all of the service's -# child processes, and most of the time this is undesirable. Please set -# it in /etc/conf.d/. +# Be aware that setting this to yes means all of a service's +# child processes will be killed. Keep this in mind if you set this to +# yes here instead of for the individual services in +# /etc/conf.d/. # To perform this cleanup manually for a stopped service, you can # execute cgroup_cleanup with /etc/init.d/ cgroup_cleanup or # rc-service cgroup_cleanup. +# The process followed in this cleanup is the following: +# 1. send stopsig (sigterm if it isn't set) to all processes left in the +# cgroup immediately followed by sigcont. +# 2. Send sighup to all processes in the cgroup if rc_send_sighup is +# yes. +# 3. delay for rc_timeout_stopsec seconds. +# 4. send sigkill to all processes in the cgroup unless disabled by +# setting rc_send_sigkill to no. # rc_cgroup_cleanup="NO" + +# If this is yes, we will send sighup to the processes in the cgroup +# immediately after stopsig and sigcont. +#rc_send_sighup="NO" + +# This is the amount of time in seconds that we delay after sending sigcont +# and optionally sighup, before we optionally send sigkill to all +# processes in the # cgroup. +# The default is 90 seconds. +#rc_timeout_stopsec="90" + +# If this is set to no, we do not send sigkill to all processes in the +# cgroup. +#rc_send_sigkill="YES"