From: Frank Brehm Date: Mon, 18 Jan 2016 17:26:42 +0000 (+0100) Subject: Current state X-Git-Url: https://git.uhu-banane.org/?a=commitdiff_plain;h=1b61e24091b2200eb056b767c265cf78a5f6ce97;p=config%2Fhelga%2Fetc.git Current state --- diff --git a/.etckeeper b/.etckeeper index bc7f6d7..c3196a1 100755 --- a/.etckeeper +++ b/.etckeeper @@ -922,6 +922,7 @@ maybe chmod 0644 'config-archive/etc/rc.conf.2' maybe chmod 0644 'config-archive/etc/rc.conf.3' maybe chmod 0644 'config-archive/etc/rc.conf.4' maybe chmod 0644 'config-archive/etc/rc.conf.5' +maybe chmod 0644 'config-archive/etc/rc.conf.6' maybe chmod 0644 'config-archive/etc/rc.conf.dist' maybe chmod 0755 'config-archive/etc/reoback' maybe chmod 0644 'config-archive/etc/reoback/files.conf' diff --git a/config-archive/etc/rc.conf b/config-archive/etc/rc.conf index e9b3725..8593150 100644 --- a/config-archive/etc/rc.conf +++ b/config-archive/etc/rc.conf @@ -210,12 +210,21 @@ rc_tty_number=12 # Set the devices controller settings for this service. #rc_cgroup_devices="" +# Set the hugetlb controller settings for this service. +#rc_cgroup_hugetlb="" + # Set the memory controller settings for this service. #rc_cgroup_memory="" +# Set the net_cls controller settings for this service. +#rc_cgroup_net_cls="" + # Set the net_prio controller settings for this service. #rc_cgroup_net_prio="" +# Set the pids controller settings for this service. +#rc_cgroup_pids="" + # Set this to YES if yu want all of the processes in a service's cgroup # killed when the service is stopped or restarted. # This should not be set globally because it kills all of the service's diff --git a/config-archive/etc/rc.conf.1 b/config-archive/etc/rc.conf.1 index 118530b..e9b3725 100644 --- a/config-archive/etc/rc.conf.1 +++ b/config-archive/etc/rc.conf.1 @@ -116,6 +116,9 @@ unicode="YES" #SSD_NICELEVEL="-19" # Pass ulimit parameters +# If you are using bash in POSIX mode for your shell, note that the +# ulimit command uses a block size of 512 bytes for the -c and -f +# options #rc_ulimit="-u 30" # It's possible to define extra dependencies for services like so @@ -147,14 +150,15 @@ unicode="YES" # LINUX SPECIFIC OPTIONS # This is the subsystem type. Valid options on Linux: -# "" - nothing special -# "lxc" - Linux Containers -# "openvz" - Linux OpenVZ -# "prefix" - Prefix -# "uml" - Usermode Linux -# "vserver" - Linux vserver -# "xen0" - Xen0 Domain -# "xenU" - XenU Domain +# "" - nothing special +# "lxc" - Linux Containers +# "openvz" - Linux OpenVZ +# "prefix" - Prefix +# "uml" - Usermode Linux +# "vserver" - Linux vserver +# "systemd-nspawn" - Container created by the systemd-nspawn utility +# "xen0" - Xen0 Domain +# "xenU" - XenU Domain # If this is commented out, automatic detection will be used. # # This should be set to the value representing the environment this file is diff --git a/config-archive/etc/rc.conf.2 b/config-archive/etc/rc.conf.2 index 42b7dfd..118530b 100644 --- a/config-archive/etc/rc.conf.2 +++ b/config-archive/etc/rc.conf.2 @@ -51,6 +51,10 @@ rc_logger="YES" # The default value is: /var/log/rc.log rc_log_path="/var/log/rc.log" +# If you want verbose output for OpenRC, set this to yes. If you want +# verbose output for service foo only, set it to yes in /etc/conf.d/foo. +#rc_verbose=no + # By default we filter the environment for our running scripts. To allow other # variables through, add them here. Use a * to allow all variables through. #rc_env_allow="VAR1 VAR2" @@ -73,6 +77,10 @@ rc_log_path="/var/log/rc.log" #rc_crashed_stop=NO #rc_crashed_start=YES +# Set rc_nocolor to yes if you do not want colors displayed in OpenRC +# output. +#rc_nocolor=NO + ############################################################################## # MISC CONFIGURATION VARIABLES # There variables are shared between many init scripts @@ -86,7 +94,7 @@ unicode="YES" # Below is the default list of network fstypes. # -# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs +# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs # nfs nfs4 ocfs2 shfs smbfs # # If you would like to add to this list, you can do so by adding your diff --git a/config-archive/etc/rc.conf.3 b/config-archive/etc/rc.conf.3 index b9a9d6d..42b7dfd 100644 --- a/config-archive/etc/rc.conf.3 +++ b/config-archive/etc/rc.conf.3 @@ -80,6 +80,10 @@ rc_log_path="/var/log/rc.log" # Set unicode to YES to turn on unicode support for keyboards and screens. unicode="YES" +# This is how long fuser should wait for a remote server to respond. The +# default is 60 seconds, but it can be adjusted here. +#rc_fuser_timeout=60 + # Below is the default list of network fstypes. # # afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs @@ -101,7 +105,7 @@ unicode="YES" # Some daemons are started and stopped via start-stop-daemon. # We can set some things on a per service basis, like the nicelevel. -#export SSD_NICELEVEL="-19" +#SSD_NICELEVEL="-19" # Pass ulimit parameters #rc_ulimit="-u 30" @@ -153,10 +157,59 @@ rc_sys="" # consolefont, numlock, etc ...) rc_tty_number=12 +############################################################################## +# CGROUPS RESOURCE MANAGEMENT + # If you have cgroups turned on in your kernel, this switch controls # whether or not a group for each controller is mounted under # /sys/fs/cgroup. -# Support for process management by cgroups is planned in the future, -# so if you turn this off, be aware that you may not be able to use that -# feature. +# None of the other options in this section work if this is set to "NO". #rc_controller_cgroups="YES" + +# The following settings allow you to set up values for the cgroup +# controllers for your services. +# They can be set in this file;, however, if you do this, the settings +# will apply to all of your services. +# If you want different settings for each service, place the settings in +# /etc/conf.d/foo for service foo. +# The format is to specify the names of the settings followed by their +# values. Each variable can hold multiple settings. +# For example, you would use this to set the cpu.shares setting in the +# cpu controller to 512 for your service. +# rc_cgroup_cpu=" +# cpu.shares 512 +# " +# +#For more information about the adjustments that can be made with +#cgroups, see Documentation/cgroups/* in the linux kernel source tree. + +# Set the blkio controller settings for this service. +#rc_cgroup_blkio="" + +# Set the cpu controller settings for this service. +#rc_cgroup_cpu="" + +# Add this service to the cpuacct controller (any value means yes). +#rc_cgroup_cpuacct="" + +# Set the cpuset controller settings for this service. +#rc_cgroup_cpuset="" + +# Set the devices controller settings for this service. +#rc_cgroup_devices="" + +# Set the memory controller settings for this service. +#rc_cgroup_memory="" + +# Set the net_prio controller settings for this service. +#rc_cgroup_net_prio="" + +# Set this to YES if yu want all of the processes in a service's cgroup +# killed when the service is stopped or restarted. +# This should not be set globally because it kills all of the service's +# child processes, and most of the time this is undesirable. Please set +# it in /etc/conf.d/. +# To perform this cleanup manually for a stopped service, you can +# execute cgroup_cleanup with /etc/init.d/ cgroup_cleanup or +# rc-service cgroup_cleanup. +# rc_cgroup_cleanup="NO" diff --git a/config-archive/etc/rc.conf.4 b/config-archive/etc/rc.conf.4 index ae9e0cf..b9a9d6d 100644 --- a/config-archive/etc/rc.conf.4 +++ b/config-archive/etc/rc.conf.4 @@ -154,7 +154,7 @@ rc_sys="" rc_tty_number=12 # If you have cgroups turned on in your kernel, this switch controls -# whether or not a group for each controler is mounted under +# whether or not a group for each controller is mounted under # /sys/fs/cgroup. # Support for process management by cgroups is planned in the future, # so if you turn this off, be aware that you may not be able to use that diff --git a/config-archive/etc/rc.conf.5 b/config-archive/etc/rc.conf.5 index e0be8cb..ae9e0cf 100644 --- a/config-archive/etc/rc.conf.5 +++ b/config-archive/etc/rc.conf.5 @@ -1,8 +1,18 @@ # Global OpenRC configuration settings +# Set to "YES" if you want the rc system to try and start services +# in parallel for a slight speed improvement. When running in parallel we +# prefix the service output with its name as the output will get +# jumbled up. +# WARNING: whilst we have improved parallel, it can still potentially lock +# the boot process. Don't file bugs about this unless you can supply +# patches that fix it without breaking other things! +#rc_parallel="NO" + # Set rc_interactive to "YES" and you'll be able to press the I key during # boot so you can choose to start specific services. Set to "NO" to disable -# this feature. +# this feature. This feature is automatically disabled if rc_parallel is +# set to YES. #rc_interactive="YES" # If we need to drop to a shell, you can specify it here. @@ -84,6 +94,10 @@ unicode="YES" # These variables are documented here, but should be configured in # /etc/conf.d/foo for service foo and NOT enabled here unless you # really want them to work on a global basis. +# If your service has characters in its name which are not legal in +# shell variable names and you configure the variables for it in this +# file, those characters should be replaced with underscores in the +# variable names as shown below. # Some daemons are started and stopped via start-stop-daemon. # We can set some things on a per service basis, like the nicelevel. @@ -106,6 +120,13 @@ unicode="YES" #rc_foo_need="openvpn" #rc_foo_after="clock" +# Below is an example for service foo-bar. Note that the '-' is illegal +# in a shell variable name, so we convert it to an underscore. +# example for service foo-bar. +#rc_foo_bar_config="/etc/foo-bar" +#rc_foo_bar_need="openvpn" +#rc_foo_bar_after="clock" + # You can also remove dependencies. # This is mainly used for saying which servies do NOT provide net. #rc_net_tap0_provide="!net" @@ -122,9 +143,7 @@ unicode="YES" # "vserver" - Linux vserver # "xen0" - Xen0 Domain # "xenU" - XenU Domain -# If this is commented out, automatic detection will be attempted. -# Note that autodetection will not work in a prefix environment or in a -# linux container. +# If this is commented out, automatic detection will be used. # # This should be set to the value representing the environment this file is # PRESENTLY in, not the virtualization the environment is capable of. @@ -133,3 +152,11 @@ rc_sys="" # This is the number of tty's used in most of the rc-scripts (like # consolefont, numlock, etc ...) rc_tty_number=12 + +# If you have cgroups turned on in your kernel, this switch controls +# whether or not a group for each controler is mounted under +# /sys/fs/cgroup. +# Support for process management by cgroups is planned in the future, +# so if you turn this off, be aware that you may not be able to use that +# feature. +#rc_controller_cgroups="YES" diff --git a/config-archive/etc/rc.conf.6 b/config-archive/etc/rc.conf.6 new file mode 100644 index 0000000..e0be8cb --- /dev/null +++ b/config-archive/etc/rc.conf.6 @@ -0,0 +1,135 @@ +# Global OpenRC configuration settings + +# Set rc_interactive to "YES" and you'll be able to press the I key during +# boot so you can choose to start specific services. Set to "NO" to disable +# this feature. +#rc_interactive="YES" + +# If we need to drop to a shell, you can specify it here. +# If not specified we use $SHELL, otherwise the one specified in /etc/passwd, +# otherwise /bin/sh +# Linux users could specify /sbin/sulogin +rc_shell=/sbin/sulogin + +# Do we allow any started service in the runlevel to satisfy the dependency +# or do we want all of them regardless of state? For example, if net.eth0 +# and net.eth1 are in the default runlevel then with rc_depend_strict="NO" +# both will be started, but services that depend on 'net' will work if either +# one comes up. With rc_depend_strict="YES" we would require them both to +# come up. +#rc_depend_strict="YES" + +# rc_hotplug is a list of services that we allow to be hotplugged. +# By default we do not allow hotplugging. +# A hotplugged service is one started by a dynamic dev manager when a matching +# hardware device is found. +# This service is intrinsically included in the boot runlevel. +# To disable services, prefix with a ! +# Example - rc_hotplug="net.wlan !net.*" +# This allows net.wlan and any service not matching net.* to be plugged. +# Example - rc_hotplug="*" +# This allows all services to be hotplugged +#rc_hotplug="*" + +# rc_logger launches a logging daemon to log the entire rc process to +# /var/log/rc.log +# NOTE: Linux systems require the devfs service to be started before +# logging can take place and as such cannot log the sysinit runlevel. +rc_logger="YES" + +# Through rc_log_path you can specify a custom log file. +# The default value is: /var/log/rc.log +rc_log_path="/var/log/rc.log" + +# By default we filter the environment for our running scripts. To allow other +# variables through, add them here. Use a * to allow all variables through. +#rc_env_allow="VAR1 VAR2" + +# By default we assume that all daemons will start correctly. +# However, some do not - a classic example is that they fork and return 0 AND +# then child barfs on a configuration error. Or the daemon has a bug and the +# child crashes. You can set the number of milliseconds start-stop-daemon +# waits to check that the daemon is still running after starting here. +# The default is 0 - no checking. +#rc_start_wait=100 + +# rc_nostop is a list of services which will not stop when changing runlevels. +# This still allows the service itself to be stopped when called directly. +#rc_nostop="" + +# rc will attempt to start crashed services by default. +# However, it will not stop them by default as that could bring down other +# critical services. +#rc_crashed_stop=NO +#rc_crashed_start=YES + +############################################################################## +# MISC CONFIGURATION VARIABLES +# There variables are shared between many init scripts + +# Set unicode to YES to turn on unicode support for keyboards and screens. +unicode="YES" + +# Below is the default list of network fstypes. +# +# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs +# nfs nfs4 ocfs2 shfs smbfs +# +# If you would like to add to this list, you can do so by adding your +# own fstypes to the following variable. +#extra_net_fs_list="" + +############################################################################## +# SERVICE CONFIGURATION VARIABLES +# These variables are documented here, but should be configured in +# /etc/conf.d/foo for service foo and NOT enabled here unless you +# really want them to work on a global basis. + +# Some daemons are started and stopped via start-stop-daemon. +# We can set some things on a per service basis, like the nicelevel. +#export SSD_NICELEVEL="-19" + +# Pass ulimit parameters +#rc_ulimit="-u 30" + +# It's possible to define extra dependencies for services like so +#rc_config="/etc/foo" +#rc_need="openvpn" +#rc_use="net.eth0" +#rc_after="clock" +#rc_before="local" +#rc_provide="!net" + +# You can also enable the above commands here for each service. Below is an +# example for service foo. +#rc_foo_config="/etc/foo" +#rc_foo_need="openvpn" +#rc_foo_after="clock" + +# You can also remove dependencies. +# This is mainly used for saying which servies do NOT provide net. +#rc_net_tap0_provide="!net" + +############################################################################## +# LINUX SPECIFIC OPTIONS + +# This is the subsystem type. Valid options on Linux: +# "" - nothing special +# "lxc" - Linux Containers +# "openvz" - Linux OpenVZ +# "prefix" - Prefix +# "uml" - Usermode Linux +# "vserver" - Linux vserver +# "xen0" - Xen0 Domain +# "xenU" - XenU Domain +# If this is commented out, automatic detection will be attempted. +# Note that autodetection will not work in a prefix environment or in a +# linux container. +# +# This should be set to the value representing the environment this file is +# PRESENTLY in, not the virtualization the environment is capable of. +rc_sys="" + +# This is the number of tty's used in most of the rc-scripts (like +# consolefont, numlock, etc ...) +rc_tty_number=12 diff --git a/config-archive/etc/rc.conf.dist b/config-archive/etc/rc.conf.dist index 8eb5286..9209bc6 100644 --- a/config-archive/etc/rc.conf.dist +++ b/config-archive/etc/rc.conf.dist @@ -29,17 +29,20 @@ rc_shell=/sbin/sulogin # come up. #rc_depend_strict="YES" -# rc_hotplug is a list of services that we allow to be hotplugged. -# By default we do not allow hotplugging. +# rc_hotplug controls which services we allow to be hotplugged. # A hotplugged service is one started by a dynamic dev manager when a matching # hardware device is found. -# This service is intrinsically included in the boot runlevel. -# To disable services, prefix with a ! +# Hotplugged services appear in the "hotplugged" runlevel. +# If rc_hotplug is set to any value, we compare the name of this service +# to every pattern in the value, from left to right, and we allow the +# service to be hotplugged if it matches a pattern, or if it matches no +# patterns. Patterns can include shell wildcards. +# To disable services from being hotplugged, prefix patterns with "!". +#If rc_hotplug is not set or is empty, all hotplugging is disabled. # Example - rc_hotplug="net.wlan !net.*" -# This allows net.wlan and any service not matching net.* to be plugged. -# Example - rc_hotplug="*" -# This allows all services to be hotplugged -#rc_hotplug="*" +# This allows net.wlan and any service not matching net.* to be hotplugged. +# Example - rc_hotplug="!net.*" +# This allows services that do not match "net.*" to be hotplugged. # rc_logger launches a logging daemon to log the entire rc process to # /var/log/rc.log @@ -151,9 +154,11 @@ unicode="YES" # This is the subsystem type. Valid options on Linux: # "" - nothing special +# "docker" - Docker container manager # "lxc" - Linux Containers # "openvz" - Linux OpenVZ # "prefix" - Prefix +# "rkt" - CoreOS container management system # "uml" - Usermode Linux # "vserver" - Linux vserver # "systemd-nspawn" - Container created by the systemd-nspawn utility diff --git a/rc.conf b/rc.conf index 8593150..c3d7fea 100644 --- a/rc.conf +++ b/rc.conf @@ -29,17 +29,20 @@ rc_shell=/sbin/sulogin # come up. #rc_depend_strict="YES" -# rc_hotplug is a list of services that we allow to be hotplugged. -# By default we do not allow hotplugging. +# rc_hotplug controls which services we allow to be hotplugged. # A hotplugged service is one started by a dynamic dev manager when a matching # hardware device is found. -# This service is intrinsically included in the boot runlevel. -# To disable services, prefix with a ! +# Hotplugged services appear in the "hotplugged" runlevel. +# If rc_hotplug is set to any value, we compare the name of this service +# to every pattern in the value, from left to right, and we allow the +# service to be hotplugged if it matches a pattern, or if it matches no +# patterns. Patterns can include shell wildcards. +# To disable services from being hotplugged, prefix patterns with "!". +#If rc_hotplug is not set or is empty, all hotplugging is disabled. # Example - rc_hotplug="net.wlan !net.*" -# This allows net.wlan and any service not matching net.* to be plugged. -# Example - rc_hotplug="*" -# This allows all services to be hotplugged -#rc_hotplug="*" +# This allows net.wlan and any service not matching net.* to be hotplugged. +# Example - rc_hotplug="!net.*" +# This allows services that do not match "net.*" to be hotplugged. # rc_logger launches a logging daemon to log the entire rc process to # /var/log/rc.log @@ -151,9 +154,11 @@ unicode="YES" # This is the subsystem type. Valid options on Linux: # "" - nothing special +# "docker" - Docker container manager # "lxc" - Linux Containers # "openvz" - Linux OpenVZ # "prefix" - Prefix +# "rkt" - CoreOS container management system # "uml" - Usermode Linux # "vserver" - Linux vserver # "systemd-nspawn" - Container created by the systemd-nspawn utility