+++ /dev/null
-##### Primary configuration settings #####
-##########################################
-# This configuration file is used to manage the behavior of the Salt Minion.
-# With the exception of the location of the Salt Master Server, values that are
-# commented out but have an empty line after the comment are defaults that need
-# not be set in the config. If there is no blank line after the comment, the
-# value is presented as an example and is not the default.
-
-# Per default the minion will automatically include all config files
-# from minion.d/*.conf (minion.d is a directory in the same directory
-# as the main minion config file).
-#default_include: minion.d/*.conf
-
-# Set the location of the salt master server. If the master server cannot be
-# resolved, then the minion will fail to start.
-#master: salt
-
-# Set http proxy information for the minion when doing requests
-#proxy_host:
-#proxy_port:
-#proxy_username:
-#proxy_password:
-
-# If multiple masters are specified in the 'master' setting, the default behavior
-# is to always try to connect to them in the order they are listed. If random_master is
-# set to True, the order will be randomized instead. This can be helpful in distributing
-# the load of many minions executing salt-call requests, for example, from a cron job.
-# If only one master is listed, this setting is ignored and a warning will be logged.
-# NOTE: If master_type is set to failover, use master_shuffle instead.
-#random_master: False
-
-# Use if master_type is set to failover.
-#master_shuffle: False
-
-# Minions can connect to multiple masters simultaneously (all masters
-# are "hot"), or can be configured to failover if a master becomes
-# unavailable. Multiple hot masters are configured by setting this
-# value to "str". Failover masters can be requested by setting
-# to "failover". MAKE SURE TO SET master_alive_interval if you are
-# using failover.
-# Setting master_type to 'disable' let's you have a running minion (with engines and
-# beacons) without a master connection
-# master_type: str
-
-# Poll interval in seconds for checking if the master is still there. Only
-# respected if master_type above is "failover". To disable the interval entirely,
-# set the value to -1. (This may be necessary on machines which have high numbers
-# of TCP connections, such as load balancers.)
-# master_alive_interval: 30
-
-# If the minion is in multi-master mode and the master_type configuration option
-# is set to "failover", this setting can be set to "True" to force the minion
-# to fail back to the first master in the list if the first master is back online.
-#master_failback: False
-
-# If the minion is in multi-master mode, the "master_type" configuration is set to
-# "failover", and the "master_failback" option is enabled, the master failback
-# interval can be set to ping the top master with this interval, in seconds.
-#master_failback_interval: 0
-
-# Set whether the minion should connect to the master via IPv6:
-#ipv6: False
-
-# Set the number of seconds to wait before attempting to resolve
-# the master hostname if name resolution fails. Defaults to 30 seconds.
-# Set to zero if the minion should shutdown and not retry.
-# retry_dns: 30
-
-# Set the port used by the master reply and authentication server.
-#master_port: 4506
-
-# The user to run salt.
-#user: root
-
-# The user to run salt remote execution commands as via sudo. If this option is
-# enabled then sudo will be used to change the active user executing the remote
-# command. If enabled the user will need to be allowed access via the sudoers
-# file for the user that the salt minion is configured to run as. The most
-# common option would be to use the root user. If this option is set the user
-# option should also be set to a non-root user. If migrating from a root minion
-# to a non root minion the minion cache should be cleared and the minion pki
-# directory will need to be changed to the ownership of the new user.
-#sudo_user: root
-
-# Specify the location of the daemon process ID file.
-#pidfile: /var/run/salt-minion.pid
-
-# The root directory prepended to these options: pki_dir, cachedir, log_file,
-# sock_dir, pidfile.
-#root_dir: /
-
-# The path to the minion's configuration file.
-#conf_file: /etc/salt/minion
-
-# The directory to store the pki information in
-#pki_dir: /etc/salt/pki/minion
-
-# Explicitly declare the id for this minion to use, if left commented the id
-# will be the hostname as returned by the python call: socket.getfqdn()
-# Since salt uses detached ids it is possible to run multiple minions on the
-# same machine but with different ids, this can be useful for salt compute
-# clusters.
-#id:
-
-# Cache the minion id to a file when the minion's id is not statically defined
-# in the minion config. Defaults to "True". This setting prevents potential
-# problems when automatic minion id resolution changes, which can cause the
-# minion to lose connection with the master. To turn off minion id caching,
-# set this config to ``False``.
-#minion_id_caching: True
-
-# Append a domain to a hostname in the event that it does not exist. This is
-# useful for systems where socket.getfqdn() does not actually result in a
-# FQDN (for instance, Solaris).
-#append_domain:
-
-# Custom static grains for this minion can be specified here and used in SLS
-# files just like all other grains. This example sets 4 custom grains, with
-# the 'roles' grain having two values that can be matched against.
-#grains:
-# roles:
-# - webserver
-# - memcache
-# deployment: datacenter4
-# cabinet: 13
-# cab_u: 14-15
-#
-# Where cache data goes.
-# This data may contain sensitive data and should be protected accordingly.
-#cachedir: /var/cache/salt/minion
-
-# Append minion_id to these directories. Helps with
-# multiple proxies and minions running on the same machine.
-# Allowed elements in the list: pki_dir, cachedir, extension_modules
-# Normally not needed unless running several proxies and/or minions on the same machine
-# Defaults to ['cachedir'] for proxies, [] (empty list) for regular minions
-#append_minionid_config_dirs:
-
-# Verify and set permissions on configuration directories at startup.
-#verify_env: True
-
-# The minion can locally cache the return data from jobs sent to it, this
-# can be a good way to keep track of jobs the minion has executed
-# (on the minion side). By default this feature is disabled, to enable, set
-# cache_jobs to True.
-#cache_jobs: False
-
-# Set the directory used to hold unix sockets.
-#sock_dir: /var/run/salt/minion
-
-# Set the default outputter used by the salt-call command. The default is
-# "nested".
-#output: nested
-
-# To set a list of additional directories to search for salt outputters, set the
-# outputter_dirs option.
-#outputter_dirs: []
-
-# By default output is colored. To disable colored output, set the color value
-# to False.
-#color: True
-
-# Do not strip off the colored output from nested results and state outputs
-# (true by default).
-# strip_colors: False
-
-# Backup files that are replaced by file.managed and file.recurse under
-# 'cachedir'/file_backup relative to their original location and appended
-# with a timestamp. The only valid setting is "minion". Disabled by default.
-#
-# Alternatively this can be specified for each file in state files:
-# /etc/ssh/sshd_config:
-# file.managed:
-# - source: salt://ssh/sshd_config
-# - backup: minion
-#
-#backup_mode: minion
-
-# When waiting for a master to accept the minion's public key, salt will
-# continuously attempt to reconnect until successful. This is the time, in
-# seconds, between those reconnection attempts.
-#acceptance_wait_time: 10
-
-# If this is nonzero, the time between reconnection attempts will increase by
-# acceptance_wait_time seconds per iteration, up to this maximum. If this is
-# set to zero, the time between reconnection attempts will stay constant.
-#acceptance_wait_time_max: 0
-
-# If the master rejects the minion's public key, retry instead of exiting.
-# Rejected keys will be handled the same as waiting on acceptance.
-#rejected_retry: False
-
-# When the master key changes, the minion will try to re-auth itself to receive
-# the new master key. In larger environments this can cause a SYN flood on the
-# master because all minions try to re-auth immediately. To prevent this and
-# have a minion wait for a random amount of time, use this optional parameter.
-# The wait-time will be a random number of seconds between 0 and the defined value.
-#random_reauth_delay: 60
-
-
-# To avoid overloading a master when many minions startup at once, a randomized
-# delay may be set to tell the minions to wait before connecting to the master.
-# This value is the number of seconds to choose from for a random number. For
-# example, setting this value to 60 will choose a random number of seconds to delay
-# on startup between zero seconds and sixty seconds. Setting to '0' will disable
-# this feature.
-#random_startup_delay: 0
-
-# When waiting for a master to accept the minion's public key, salt will
-# continuously attempt to reconnect until successful. This is the timeout value,
-# in seconds, for each individual attempt. After this timeout expires, the minion
-# will wait for acceptance_wait_time seconds before trying again. Unless your master
-# is under unusually heavy load, this should be left at the default.
-#auth_timeout: 60
-
-# Number of consecutive SaltReqTimeoutError that are acceptable when trying to
-# authenticate.
-#auth_tries: 7
-
-# The number of attempts to connect to a master before giving up.
-# Set this to -1 for unlimited attempts. This allows for a master to have
-# downtime and the minion to reconnect to it later when it comes back up.
-# In 'failover' mode, it is the number of attempts for each set of masters.
-# In this mode, it will cycle through the list of masters for each attempt.
-#
-# This is different than auth_tries because auth_tries attempts to
-# retry auth attempts with a single master. auth_tries is under the
-# assumption that you can connect to the master but not gain
-# authorization from it. master_tries will still cycle through all
-# the masters in a given try, so it is appropriate if you expect
-# occasional downtime from the master(s).
-#master_tries: 1
-
-# If authentication fails due to SaltReqTimeoutError during a ping_interval,
-# cause sub minion process to restart.
-#auth_safemode: False
-
-# Ping Master to ensure connection is alive (minutes).
-#ping_interval: 0
-
-# To auto recover minions if master changes IP address (DDNS)
-# auth_tries: 10
-# auth_safemode: False
-# ping_interval: 2
-#
-# Minions won't know master is missing until a ping fails. After the ping fail,
-# the minion will attempt authentication and likely fails out and cause a restart.
-# When the minion restarts it will resolve the masters IP and attempt to reconnect.
-
-# If you don't have any problems with syn-floods, don't bother with the
-# three recon_* settings described below, just leave the defaults!
-#
-# The ZeroMQ pull-socket that binds to the masters publishing interface tries
-# to reconnect immediately, if the socket is disconnected (for example if
-# the master processes are restarted). In large setups this will have all
-# minions reconnect immediately which might flood the master (the ZeroMQ-default
-# is usually a 100ms delay). To prevent this, these three recon_* settings
-# can be used.
-# recon_default: the interval in milliseconds that the socket should wait before
-# trying to reconnect to the master (1000ms = 1 second)
-#
-# recon_max: the maximum time a socket should wait. each interval the time to wait
-# is calculated by doubling the previous time. if recon_max is reached,
-# it starts again at recon_default. Short example:
-#
-# reconnect 1: the socket will wait 'recon_default' milliseconds
-# reconnect 2: 'recon_default' * 2
-# reconnect 3: ('recon_default' * 2) * 2
-# reconnect 4: value from previous interval * 2
-# reconnect 5: value from previous interval * 2
-# reconnect x: if value >= recon_max, it starts again with recon_default
-#
-# recon_randomize: generate a random wait time on minion start. The wait time will
-# be a random value between recon_default and recon_default +
-# recon_max. Having all minions reconnect with the same recon_default
-# and recon_max value kind of defeats the purpose of being able to
-# change these settings. If all minions have the same values and your
-# setup is quite large (several thousand minions), they will still
-# flood the master. The desired behavior is to have timeframe within
-# all minions try to reconnect.
-#
-# Example on how to use these settings. The goal: have all minions reconnect within a
-# 60 second timeframe on a disconnect.
-# recon_default: 1000
-# recon_max: 59000
-# recon_randomize: True
-#
-# Each minion will have a randomized reconnect value between 'recon_default'
-# and 'recon_default + recon_max', which in this example means between 1000ms
-# 60000ms (or between 1 and 60 seconds). The generated random-value will be
-# doubled after each attempt to reconnect. Lets say the generated random
-# value is 11 seconds (or 11000ms).
-# reconnect 1: wait 11 seconds
-# reconnect 2: wait 22 seconds
-# reconnect 3: wait 33 seconds
-# reconnect 4: wait 44 seconds
-# reconnect 5: wait 55 seconds
-# reconnect 6: wait time is bigger than 60 seconds (recon_default + recon_max)
-# reconnect 7: wait 11 seconds
-# reconnect 8: wait 22 seconds
-# reconnect 9: wait 33 seconds
-# reconnect x: etc.
-#
-# In a setup with ~6000 thousand hosts these settings would average the reconnects
-# to about 100 per second and all hosts would be reconnected within 60 seconds.
-# recon_default: 100
-# recon_max: 5000
-# recon_randomize: False
-#
-#
-# The loop_interval sets how long in seconds the minion will wait between
-# evaluating the scheduler and running cleanup tasks. This defaults to 1
-# second on the minion scheduler.
-#loop_interval: 1
-
-# Some installations choose to start all job returns in a cache or a returner
-# and forgo sending the results back to a master. In this workflow, jobs
-# are most often executed with --async from the Salt CLI and then results
-# are evaluated by examining job caches on the minions or any configured returners.
-# WARNING: Setting this to False will **disable** returns back to the master.
-#pub_ret: True
-
-
-# The grains can be merged, instead of overridden, using this option.
-# This allows custom grains to defined different subvalues of a dictionary
-# grain. By default this feature is disabled, to enable set grains_deep_merge
-# to ``True``.
-#grains_deep_merge: False
-
-# The grains_refresh_every setting allows for a minion to periodically check
-# its grains to see if they have changed and, if so, to inform the master
-# of the new grains. This operation is moderately expensive, therefore
-# care should be taken not to set this value too low.
-#
-# Note: This value is expressed in __minutes__!
-#
-# A value of 10 minutes is a reasonable default.
-#
-# If the value is set to zero, this check is disabled.
-#grains_refresh_every: 1
-
-# Cache grains on the minion. Default is False.
-#grains_cache: False
-
-# Cache rendered pillar data on the minion. Default is False.
-# This may cause 'cachedir'/pillar to contain sensitive data that should be
-# protected accordingly.
-#minion_pillar_cache: False
-
-# Grains cache expiration, in seconds. If the cache file is older than this
-# number of seconds then the grains cache will be dumped and fully re-populated
-# with fresh data. Defaults to 5 minutes. Will have no effect if 'grains_cache'
-# is not enabled.
-# grains_cache_expiration: 300
-
-# Determines whether or not the salt minion should run scheduled mine updates.
-# Defaults to "True". Set to "False" to disable the scheduled mine updates
-# (this essentially just does not add the mine update function to the minion's
-# scheduler).
-#mine_enabled: True
-
-# Determines whether or not scheduled mine updates should be accompanied by a job
-# return for the job cache. Defaults to "False". Set to "True" to include job
-# returns in the job cache for mine updates.
-#mine_return_job: False
-
-# Example functions that can be run via the mine facility
-# NO mine functions are established by default.
-# Note these can be defined in the minion's pillar as well.
-#mine_functions:
-# test.ping: []
-# network.ip_addrs:
-# interface: eth0
-# cidr: '10.0.0.0/8'
-
-# The number of minutes between mine updates.
-#mine_interval: 60
-
-# Windows platforms lack posix IPC and must rely on slower TCP based inter-
-# process communications. Set ipc_mode to 'tcp' on such systems
-#ipc_mode: ipc
-
-# Overwrite the default tcp ports used by the minion when in tcp mode
-#tcp_pub_port: 4510
-#tcp_pull_port: 4511
-
-# Passing very large events can cause the minion to consume large amounts of
-# memory. This value tunes the maximum size of a message allowed onto the
-# minion event bus. The value is expressed in bytes.
-#max_event_size: 1048576
-
-# To detect failed master(s) and fire events on connect/disconnect, set
-# master_alive_interval to the number of seconds to poll the masters for
-# connection events.
-#
-#master_alive_interval: 30
-
-# The minion can include configuration from other files. To enable this,
-# pass a list of paths to this option. The paths can be either relative or
-# absolute; if relative, they are considered to be relative to the directory
-# the main minion configuration file lives in (this file). Paths can make use
-# of shell-style globbing. If no files are matched by a path passed to this
-# option then the minion will log a warning message.
-#
-# Include a config file from some other path:
-# include: /etc/salt/extra_config
-#
-# Include config from several files and directories:
-#include:
-# - /etc/salt/extra_config
-# - /etc/roles/webserver
-
-# The syndic minion can verify that it is talking to the correct master via the
-# key fingerprint of the higher-level master with the "syndic_finger" config.
-#syndic_finger: ''
-#
-#
-#
-##### Minion module management #####
-##########################################
-# Disable specific modules. This allows the admin to limit the level of
-# access the master has to the minion. The default here is the empty list,
-# below is an example of how this needs to be formatted in the config file
-#disable_modules:
-# - cmdmod
-# - test
-#disable_returners: []
-
-# This is the reverse of disable_modules. The default, like disable_modules, is the empty list,
-# but if this option is set to *anything* then *only* those modules will load.
-# Note that this is a very large hammer and it can be quite difficult to keep the minion working
-# the way you think it should since Salt uses many modules internally itself. At a bare minimum
-# you need the following enabled or else the minion won't start.
-#whitelist_modules:
-# - cmdmod
-# - test
-# - config
-
-# Modules can be loaded from arbitrary paths. This enables the easy deployment
-# of third party modules. Modules for returners and minions can be loaded.
-# Specify a list of extra directories to search for minion modules and
-# returners. These paths must be fully qualified!
-#module_dirs: []
-#returner_dirs: []
-#states_dirs: []
-#render_dirs: []
-#utils_dirs: []
-#
-# A module provider can be statically overwritten or extended for the minion
-# via the providers option, in this case the default module will be
-# overwritten by the specified module. In this example the pkg module will
-# be provided by the yumpkg5 module instead of the system default.
-#providers:
-# pkg: yumpkg5
-#
-# Enable Cython modules searching and loading. (Default: False)
-#cython_enable: False
-#
-# Specify a max size (in bytes) for modules on import. This feature is currently
-# only supported on *nix operating systems and requires psutil.
-# modules_max_memory: -1
-
-
-##### State Management Settings #####
-###########################################
-# The state management system executes all of the state templates on the minion
-# to enable more granular control of system state management. The type of
-# template and serialization used for state management needs to be configured
-# on the minion, the default renderer is yaml_jinja. This is a yaml file
-# rendered from a jinja template, the available options are:
-# yaml_jinja
-# yaml_mako
-# yaml_wempy
-# json_jinja
-# json_mako
-# json_wempy
-#
-#renderer: yaml_jinja
-#
-# The failhard option tells the minions to stop immediately after the first
-# failure detected in the state execution. Defaults to False.
-#failhard: False
-#
-# Reload the modules prior to a highstate run.
-#autoload_dynamic_modules: True
-#
-# clean_dynamic_modules keeps the dynamic modules on the minion in sync with
-# the dynamic modules on the master, this means that if a dynamic module is
-# not on the master it will be deleted from the minion. By default, this is
-# enabled and can be disabled by changing this value to False.
-#clean_dynamic_modules: True
-#
-# Normally, the minion is not isolated to any single environment on the master
-# when running states, but the environment can be isolated on the minion side
-# by statically setting it. Remember that the recommended way to manage
-# environments is to isolate via the top file.
-#environment: None
-#
-# Isolates the pillar environment on the minion side. This functions the same
-# as the environment setting, but for pillar instead of states.
-#pillarenv: None
-#
-# Set this option to True to force the pillarenv to be the same as the
-# effective saltenv when running states. Note that if pillarenv is specified,
-# this option will be ignored.
-#pillarenv_from_saltenv: False
-#
-# Set this option to 'True' to force a 'KeyError' to be raised whenever an
-# attempt to retrieve a named value from pillar fails. When this option is set
-# to 'False', the failed attempt returns an empty string. Default is 'False'.
-#pillar_raise_on_missing: False
-#
-# If using the local file directory, then the state top file name needs to be
-# defined, by default this is top.sls.
-#state_top: top.sls
-#
-# Run states when the minion daemon starts. To enable, set startup_states to:
-# 'highstate' -- Execute state.highstate
-# 'sls' -- Read in the sls_list option and execute the named sls files
-# 'top' -- Read top_file option and execute based on that file on the Master
-#startup_states: ''
-#
-# List of states to run when the minion starts up if startup_states is 'sls':
-#sls_list:
-# - edit.vim
-# - hyper
-#
-# Top file to execute if startup_states is 'top':
-#top_file: ''
-
-# Automatically aggregate all states that have support for mod_aggregate by
-# setting to True. Or pass a list of state module names to automatically
-# aggregate just those types.
-#
-# state_aggregate:
-# - pkg
-#
-#state_aggregate: False
-
-##### File Directory Settings #####
-##########################################
-# The Salt Minion can redirect all file server operations to a local directory,
-# this allows for the same state tree that is on the master to be used if
-# copied completely onto the minion. This is a literal copy of the settings on
-# the master but used to reference a local directory on the minion.
-
-# Set the file client. The client defaults to looking on the master server for
-# files, but can be directed to look at the local file directory setting
-# defined below by setting it to "local". Setting a local file_client runs the
-# minion in masterless mode.
-#file_client: remote
-
-# The file directory works on environments passed to the minion, each environment
-# can have multiple root directories, the subdirectories in the multiple file
-# roots cannot match, otherwise the downloaded files will not be able to be
-# reliably ensured. A base environment is required to house the top file.
-# Example:
-# file_roots:
-# base:
-# - /srv/salt/
-# dev:
-# - /srv/salt/dev/services
-# - /srv/salt/dev/states
-# prod:
-# - /srv/salt/prod/services
-# - /srv/salt/prod/states
-#
-#file_roots:
-# base:
-# - /srv/salt
-
-# Uncomment the line below if you do not want the file_server to follow
-# symlinks when walking the filesystem tree. This is set to True
-# by default. Currently this only applies to the default roots
-# fileserver_backend.
-#fileserver_followsymlinks: False
-#
-# Uncomment the line below if you do not want symlinks to be
-# treated as the files they are pointing to. By default this is set to
-# False. By uncommenting the line below, any detected symlink while listing
-# files on the Master will not be returned to the Minion.
-#fileserver_ignoresymlinks: True
-#
-# By default, the Salt fileserver recurses fully into all defined environments
-# to attempt to find files. To limit this behavior so that the fileserver only
-# traverses directories with SLS files and special Salt directories like _modules,
-# enable the option below. This might be useful for installations where a file root
-# has a very large number of files and performance is negatively impacted. Default
-# is False.
-#fileserver_limit_traversal: False
-
-# The hash_type is the hash to use when discovering the hash of a file on
-# the local fileserver. The default is sha256, but md5, sha1, sha224, sha384
-# and sha512 are also supported.
-#
-# WARNING: While md5 and sha1 are also supported, do not use them due to the
-# high chance of possible collisions and thus security breach.
-#
-# Warning: Prior to changing this value, the minion should be stopped and all
-# Salt caches should be cleared.
-#hash_type: sha256
-
-# The Salt pillar is searched for locally if file_client is set to local. If
-# this is the case, and pillar data is defined, then the pillar_roots need to
-# also be configured on the minion:
-#pillar_roots:
-# base:
-# - /srv/pillar
-
-# Set a hard-limit on the size of the files that can be pushed to the master.
-# It will be interpreted as megabytes. Default: 100
-#file_recv_max_size: 100
-#
-#
-###### Security settings #####
-###########################################
-# Enable "open mode", this mode still maintains encryption, but turns off
-# authentication, this is only intended for highly secure environments or for
-# the situation where your keys end up in a bad state. If you run in open mode
-# you do so at your own risk!
-#open_mode: False
-
-# The size of key that should be generated when creating new keys.
-#keysize: 2048
-
-# Enable permissive access to the salt keys. This allows you to run the
-# master or minion as root, but have a non-root group be given access to
-# your pki_dir. To make the access explicit, root must belong to the group
-# you've given access to. This is potentially quite insecure.
-#permissive_pki_access: False
-
-# The state_verbose and state_output settings can be used to change the way
-# state system data is printed to the display. By default all data is printed.
-# The state_verbose setting can be set to True or False, when set to False
-# all data that has a result of True and no changes will be suppressed.
-#state_verbose: True
-
-# The state_output setting changes if the output is the full multi line
-# output for each changed state if set to 'full', but if set to 'terse'
-# the output will be shortened to a single line.
-#state_output: full
-
-# The state_output_diff setting changes whether or not the output from
-# successful states is returned. Useful when even the terse output of these
-# states is cluttering the logs. Set it to True to ignore them.
-#state_output_diff: False
-
-# The state_output_profile setting changes whether profile information
-# will be shown for each state run.
-#state_output_profile: True
-
-# Fingerprint of the master public key to validate the identity of your Salt master
-# before the initial key exchange. The master fingerprint can be found by running
-# "salt-key -f master.pub" on the Salt master.
-#master_finger: ''
-
-# Use TLS/SSL encrypted connection between master and minion.
-# Can be set to a dictionary containing keyword arguments corresponding to Python's
-# 'ssl.wrap_socket' method.
-# Default is None.
-#ssl:
-# keyfile: <path_to_keyfile>
-# certfile: <path_to_certfile>
-# ssl_version: PROTOCOL_TLSv1_2
-
-
-###### Reactor Settings #####
-###########################################
-# Define a salt reactor. See https://docs.saltstack.com/en/latest/topics/reactor/
-#reactor: []
-
-#Set the TTL for the cache of the reactor configuration.
-#reactor_refresh_interval: 60
-
-#Configure the number of workers for the runner/wheel in the reactor.
-#reactor_worker_threads: 10
-
-#Define the queue size for workers in the reactor.
-#reactor_worker_hwm: 10000
-
-
-###### Thread settings #####
-###########################################
-# Disable multiprocessing support, by default when a minion receives a
-# publication a new process is spawned and the command is executed therein.
-#
-# WARNING: Disabling multiprocessing may result in substantial slowdowns
-# when processing large pillars. See https://github.com/saltstack/salt/issues/38758
-# for a full explanation.
-#multiprocessing: True
-
-
-##### Logging settings #####
-##########################################
-# The location of the minion log file
-# The minion log can be sent to a regular file, local path name, or network
-# location. Remote logging works best when configured to use rsyslogd(8) (e.g.:
-# ``file:///dev/log``), with rsyslogd(8) configured for network logging. The URI
-# format is: <file|udp|tcp>://<host|socketpath>:<port-if-required>/<log-facility>
-#log_file: /var/log/salt/minion
-#log_file: file:///dev/log
-#log_file: udp://loghost:10514
-#
-#log_file: /var/log/salt/minion
-#key_logfile: /var/log/salt/key
-
-# The level of messages to send to the console.
-# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
-#
-# The following log levels are considered INSECURE and may log sensitive data:
-# ['garbage', 'trace', 'debug']
-#
-# Default: 'warning'
-#log_level: warning
-
-# The level of messages to send to the log file.
-# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
-# If using 'log_granular_levels' this must be set to the highest desired level.
-# Default: 'warning'
-#log_level_logfile:
-
-# The date and time format used in log messages. Allowed date/time formatting
-# can be seen here: http://docs.python.org/library/time.html#time.strftime
-#log_datefmt: '%H:%M:%S'
-#log_datefmt_logfile: '%Y-%m-%d %H:%M:%S'
-
-# The format of the console logging messages. Allowed formatting options can
-# be seen here: http://docs.python.org/library/logging.html#logrecord-attributes
-#
-# Console log colors are specified by these additional formatters:
-#
-# %(colorlevel)s
-# %(colorname)s
-# %(colorprocess)s
-# %(colormsg)s
-#
-# Since it is desirable to include the surrounding brackets, '[' and ']', in
-# the coloring of the messages, these color formatters also include padding as
-# well. Color LogRecord attributes are only available for console logging.
-#
-#log_fmt_console: '%(colorlevel)s %(colormsg)s'
-#log_fmt_console: '[%(levelname)-8s] %(message)s'
-#
-#log_fmt_logfile: '%(asctime)s,%(msecs)03d [%(name)-17s][%(levelname)-8s] %(message)s'
-
-# This can be used to control logging levels more specificically. This
-# example sets the main salt library at the 'warning' level, but sets
-# 'salt.modules' to log at the 'debug' level:
-# log_granular_levels:
-# 'salt': 'warning'
-# 'salt.modules': 'debug'
-#
-#log_granular_levels: {}
-
-# To diagnose issues with minions disconnecting or missing returns, ZeroMQ
-# supports the use of monitor sockets to log connection events. This
-# feature requires ZeroMQ 4.0 or higher.
-#
-# To enable ZeroMQ monitor sockets, set 'zmq_monitor' to 'True' and log at a
-# debug level or higher.
-#
-# A sample log event is as follows:
-#
-# [DEBUG ] ZeroMQ event: {'endpoint': 'tcp://127.0.0.1:4505', 'event': 512,
-# 'value': 27, 'description': 'EVENT_DISCONNECTED'}
-#
-# All events logged will include the string 'ZeroMQ event'. A connection event
-# should be logged as the minion starts up and initially connects to the
-# master. If not, check for debug log level and that the necessary version of
-# ZeroMQ is installed.
-#
-#zmq_monitor: False
-
-# Number of times to try to authenticate with the salt master when reconnecting
-# to the master
-#tcp_authentication_retries: 5
-
-###### Module configuration #####
-###########################################
-# Salt allows for modules to be passed arbitrary configuration data, any data
-# passed here in valid yaml format will be passed on to the salt minion modules
-# for use. It is STRONGLY recommended that a naming convention be used in which
-# the module name is followed by a . and then the value. Also, all top level
-# data must be applied via the yaml dict construct, some examples:
-#
-# You can specify that all modules should run in test mode:
-#test: True
-#
-# A simple value for the test module:
-#test.foo: foo
-#
-# A list for the test module:
-#test.bar: [baz,quo]
-#
-# A dict for the test module:
-#test.baz: {spam: sausage, cheese: bread}
-#
-#
-###### Update settings ######
-###########################################
-# Using the features in Esky, a salt minion can both run as a frozen app and
-# be updated on the fly. These options control how the update process
-# (saltutil.update()) behaves.
-#
-# The url for finding and downloading updates. Disabled by default.
-#update_url: False
-#
-# The list of services to restart after a successful update. Empty by default.
-#update_restart_services: []
-
-
-###### Keepalive settings ######
-############################################
-# ZeroMQ now includes support for configuring SO_KEEPALIVE if supported by
-# the OS. If connections between the minion and the master pass through
-# a state tracking device such as a firewall or VPN gateway, there is
-# the risk that it could tear down the connection the master and minion
-# without informing either party that their connection has been taken away.
-# Enabling TCP Keepalives prevents this from happening.
-
-# Overall state of TCP Keepalives, enable (1 or True), disable (0 or False)
-# or leave to the OS defaults (-1), on Linux, typically disabled. Default True, enabled.
-#tcp_keepalive: True
-
-# How long before the first keepalive should be sent in seconds. Default 300
-# to send the first keepalive after 5 minutes, OS default (-1) is typically 7200 seconds
-# on Linux see /proc/sys/net/ipv4/tcp_keepalive_time.
-#tcp_keepalive_idle: 300
-
-# How many lost probes are needed to consider the connection lost. Default -1
-# to use OS defaults, typically 9 on Linux, see /proc/sys/net/ipv4/tcp_keepalive_probes.
-#tcp_keepalive_cnt: -1
-
-# How often, in seconds, to send keepalives after the first one. Default -1 to
-# use OS defaults, typically 75 seconds on Linux, see
-# /proc/sys/net/ipv4/tcp_keepalive_intvl.
-#tcp_keepalive_intvl: -1
-
-
-###### Windows Software settings ######
-############################################
-# Location of the repository cache file on the master:
-#win_repo_cachefile: 'salt://win/repo/winrepo.p'
-
-
-###### Returner settings ######
-############################################
-# Default Minion returners. Can be a comma delimited string or a list:
-#
-#return: mysql
-#
-#return: mysql,slack,redis
-#
-#return:
-# - mysql
-# - hipchat
-# - slack
-
-
-###### Miscellaneous settings ######
-############################################
-# Default match type for filtering events tags: startswith, endswith, find, regex, fnmatch
-#event_match_type: startswith
projects / config / vera / etc.git / commitdiff