# The documentation is always available at
# http://httpd.apache.org/docs/2.2/
<IfDefine MANUAL>
-AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apache-2.2.23/manual$1"
+AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br))?(/.*)?$ "/usr/share/doc/apache-2.2.24/manual$1"
-<Directory "/usr/share/doc/apache-2.2.23/manual">
+<Directory "/usr/share/doc/apache-2.2.24/manual">
Options Indexes
AllowOverride None
Order allow,deny
--- /dev/null
+#
+# /etc/inittab: This file describes how the INIT process should set up
+# the system in a certain run-level.
+#
+# Author: Miquel van Smoorenburg, <miquels@cistron.nl>
+# Modified by: Patrick J. Volkerding, <volkerdi@ftp.cdrom.com>
+# Modified by: Daniel Robbins, <drobbins@gentoo.org>
+# Modified by: Martin Schlemmer, <azarah@gentoo.org>
+# Modified by: Mike Frysinger, <vapier@gentoo.org>
+# Modified by: Robin H. Johnson, <robbat2@gentoo.org>
+#
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/sysvinit/files/inittab-2.87,v 1.1 2010/01/08 16:55:07 williamh Exp $
+
+# Default runlevel.
+id:3:initdefault:
+
+# System initialization, mount local filesystems, etc.
+si::sysinit:/sbin/rc sysinit
+
+# Further system initialization, brings up the boot runlevel.
+rc::bootwait:/sbin/rc boot
+
+l0:0:wait:/sbin/rc shutdown
+l0s:0:wait:/sbin/halt -dhp
+l1:1:wait:/sbin/rc single
+l2:2:wait:/sbin/rc nonetwork
+l3:3:wait:/sbin/rc default
+l4:4:wait:/sbin/rc default
+l5:5:wait:/sbin/rc default
+l6:6:wait:/sbin/rc reboot
+l6r:6:wait:/sbin/reboot -dk
+#z6:6:respawn:/sbin/sulogin
+
+# new-style single-user
+su0:S:wait:/sbin/rc single
+su1:S:wait:/sbin/sulogin
+
+# TERMINALS
+c1:12345:respawn:/sbin/agetty --noclear 38400 tty1 linux
+c2:2345:respawn:/sbin/agetty 38400 tty2 linux
+c3:2345:respawn:/sbin/agetty 38400 tty3 linux
+c4:2345:respawn:/sbin/agetty 38400 tty4 linux
+c5:2345:respawn:/sbin/agetty 38400 tty5 linux
+c6:2345:respawn:/sbin/agetty 38400 tty6 linux
+
+# SERIAL CONSOLES
+#s0:12345:respawn:/sbin/agetty 115200 ttyS0 vt100
+#s1:12345:respawn:/sbin/agetty 115200 ttyS1 vt100
+s0:12345:respawn:/sbin/agetty -L ttyS0 57600 vt100
+
+# What to do at the "Three Finger Salute".
+ca:12345:ctrlaltdel:/sbin/shutdown -r now
+
+# Used by /etc/init.d/xdm to control DM startup.
+# Read the comments in /etc/init.d/xdm for more
+# info. Do NOT remove, as this will start nothing
+# extra at boot if /etc/init.d/xdm is not added
+# to the "default" runlevel.
+x:a:once:/etc/X11/startDM.sh
+
c6:2345:respawn:/sbin/agetty 38400 tty6 linux
# SERIAL CONSOLES
-#s0:12345:respawn:/sbin/agetty 9600 ttyS0 vt100
-#s1:12345:respawn:/sbin/agetty 9600 ttyS1 vt100
+#s0:12345:respawn:/sbin/agetty 115200 ttyS0 vt100
+#s1:12345:respawn:/sbin/agetty 115200 ttyS1 vt100
# What to do at the "Three Finger Salute".
ca:12345:ctrlaltdel:/sbin/shutdown -r now
# LOG FACILITY
# The syslog facility that should be used for logging purposes.
-log_facility=daemon
+log_facility=local7
# number. The file is only written if the NRPE daemon is started by the root
# user and is running in standalone mode.
-pid_file=/var/run/nrpe/nrpe.pid
+pid_file=/var/run/nrpe.pid
# ALLOWED HOST ADDRESSES
# This is an optional comma-delimited list of IP address or hostnames
-# that are allowed to talk to the NRPE daemon.
+# that are allowed to talk to the NRPE daemon. Network addresses with a bit mask
+# (i.e. 192.168.1.0/24) are also supported. Hostname wildcards are not currently
+# supported.
#
# Note: The daemon only does rudimentary checking of the client's IP
# address. I would highly recommend adding entries in your /etc/hosts.allow
#
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-allowed_hosts=127.0.0.1
+allowed_hosts=127.0.0.1,46.16.73.147
#
# Values: 0=do not allow arguments, 1=allow command arguments
-dont_blame_nrpe=0
+dont_blame_nrpe=1
# The following examples use hardcoded command arguments...
-command[check_users]=/usr/lib64/nagios/plugins/check_users -w 5 -c 10
-command[check_load]=/usr/lib64/nagios/plugins/check_load -w 15,10,5 -c 30,25,20
-command[check_hda1]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1
-command[check_zombie_procs]=/usr/lib64/nagios/plugins/check_procs -w 5 -c 10 -s Z
-command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c 200
+#command[check_users]=/usr/lib64/nagios/plugins/check_users -w 5 -c 10
+#command[check_load]=/usr/lib64/nagios/plugins/check_load -w 15,10,5 -c 30,25,20
+#command[check_hda1]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1
+#command[check_zombie_procs]=/usr/lib64/nagios/plugins/check_procs -w 5 -c 10 -s Z
+#command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c 200
# The following examples allow user-supplied arguments and can
# config file is set to '1'. This poses a potential security risk, so
# make sure you read the SECURITY file before doing this.
-#command[check_users]=/usr/lib64/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
-#command[check_load]=/usr/lib64/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
-#command[check_disk]=/usr/lib64/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+command[check_users]=/usr/lib64/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
+command[check_load]=/usr/lib64/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
+command[check_disk]=/usr/lib64/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
#command[check_procs]=/usr/lib64/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+command[check_swap]=/usr/lib64/nagios/plugins/check_swap -w $ARG1$ -c $ARG2$
+
+command[check_procs]=/opt/icinga/bin/check-procs.pl -w $ARG1$ -c $ARG2$ -s $ARG3$
+command[check_proc_arg]=/opt/icinga/bin/check-procs.pl -w $ARG1$ -c $ARG2$ -a $ARG3$
+command[check_init_proc]=/opt/icinga/bin/check-procs.pl -i -w $ARG1$ -c $ARG2$ -a $ARG3$
+
--- /dev/null
+#############################################################################
+# Sample NRPE Config File
+# Written by: Ethan Galstad (nagios@nagios.org)
+#
+# Last Modified: 11-23-2007
+#
+# NOTES:
+# This is a sample configuration file for the NRPE daemon. It needs to be
+# located on the remote host that is running the NRPE daemon, not the host
+# from which the check_nrpe client is being executed.
+#############################################################################
+
+
+# LOG FACILITY
+# The syslog facility that should be used for logging purposes.
+
+log_facility=daemon
+
+
+
+# PID FILE
+# The name of the file in which the NRPE daemon should write it's process ID
+# number. The file is only written if the NRPE daemon is started by the root
+# user and is running in standalone mode.
+
+pid_file=/var/run/nrpe/nrpe.pid
+
+
+
+# PORT NUMBER
+# Port number we should wait for connections on.
+# NOTE: This must be a non-priviledged port (i.e. > 1024).
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+server_port=5666
+
+
+
+# SERVER ADDRESS
+# Address that nrpe should bind to in case there are more than one interface
+# and you do not want nrpe to bind on all interfaces.
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+#server_address=127.0.0.1
+
+
+
+# NRPE USER
+# This determines the effective user that the NRPE daemon should run as.
+# You can either supply a username or a UID.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_user=nagios
+
+
+
+# NRPE GROUP
+# This determines the effective group that the NRPE daemon should run as.
+# You can either supply a group name or a GID.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_group=nagios
+
+
+
+# ALLOWED HOST ADDRESSES
+# This is an optional comma-delimited list of IP address or hostnames
+# that are allowed to talk to the NRPE daemon.
+#
+# Note: The daemon only does rudimentary checking of the client's IP
+# address. I would highly recommend adding entries in your /etc/hosts.allow
+# file to allow only the specified host to connect to the port
+# you are running this daemon on.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+allowed_hosts=127.0.0.1
+
+
+
+# COMMAND ARGUMENT PROCESSING
+# This option determines whether or not the NRPE daemon will allow clients
+# to specify arguments to commands that are executed. This option only works
+# if the daemon was configured with the --enable-command-args configure script
+# option.
+#
+# *** ENABLING THIS OPTION IS A SECURITY RISK! ***
+# Read the SECURITY file for information on some of the security implications
+# of enabling this variable.
+#
+# Values: 0=do not allow arguments, 1=allow command arguments
+
+dont_blame_nrpe=0
+
+
+
+# COMMAND PREFIX
+# This option allows you to prefix all commands with a user-defined string.
+# A space is automatically added between the specified prefix string and the
+# command line from the command definition.
+#
+# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! ***
+# Usage scenario:
+# Execute restricted commmands using sudo. For this to work, you need to add
+# the nagios user to your /etc/sudoers. An example entry for alllowing
+# execution of the plugins from might be:
+#
+# nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/
+#
+# This lets the nagios user run all commands in that directory (and only them)
+# without asking for a password. If you do this, make sure you don't give
+# random users write access to that directory or its contents!
+
+# command_prefix=/usr/bin/sudo
+
+
+
+# DEBUGGING OPTION
+# This option determines whether or not debugging messages are logged to the
+# syslog facility.
+# Values: 0=debugging off, 1=debugging on
+
+debug=0
+
+
+
+# COMMAND TIMEOUT
+# This specifies the maximum number of seconds that the NRPE daemon will
+# allow plugins to finish executing before killing them off.
+
+command_timeout=60
+
+
+
+# CONNECTION TIMEOUT
+# This specifies the maximum number of seconds that the NRPE daemon will
+# wait for a connection to be established before exiting. This is sometimes
+# seen where a network problem stops the SSL being established even though
+# all network sessions are connected. This causes the nrpe daemons to
+# accumulate, eating system resources. Do not set this too low.
+
+connection_timeout=300
+
+
+
+# WEEK RANDOM SEED OPTION
+# This directive allows you to use SSL even if your system does not have
+# a /dev/random or /dev/urandom (on purpose or because the necessary patches
+# were not applied). The random number generator will be seeded from a file
+# which is either a file pointed to by the environment valiable $RANDFILE
+# or $HOME/.rnd. If neither exists, the pseudo random number generator will
+# be initialized and a warning will be issued.
+# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness
+
+#allow_weak_random_seed=1
+
+
+
+# INCLUDE CONFIG FILE
+# This directive allows you to include definitions from an external config file.
+
+#include=<somefile.cfg>
+
+
+
+# INCLUDE CONFIG DIRECTORY
+# This directive allows you to include definitions from config files (with a
+# .cfg extension) in one or more directories (with recursion).
+
+#include_dir=<somedirectory>
+#include_dir=<someotherdirectory>
+
+
+
+# COMMAND DEFINITIONS
+# Command definitions that this daemon will run. Definitions
+# are in the following format:
+#
+# command[<command_name>]=<command_line>
+#
+# When the daemon receives a request to return the results of <command_name>
+# it will execute the command specified by the <command_line> argument.
+#
+# Unlike Nagios, the command line cannot contain macros - it must be
+# typed exactly as it should be executed.
+#
+# Note: Any plugins that are used in the command lines must reside
+# on the machine that this daemon is running on! The examples below
+# assume that you have plugins installed in a /usr/local/nagios/libexec
+# directory. Also note that you will have to modify the definitions below
+# to match the argument format the plugins expect. Remember, these are
+# examples only!
+
+
+# The following examples use hardcoded command arguments...
+
+command[check_users]=/usr/lib64/nagios/plugins/check_users -w 5 -c 10
+command[check_load]=/usr/lib64/nagios/plugins/check_load -w 15,10,5 -c 30,25,20
+command[check_hda1]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1
+command[check_zombie_procs]=/usr/lib64/nagios/plugins/check_procs -w 5 -c 10 -s Z
+command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c 200
+
+
+# The following examples allow user-supplied arguments and can
+# only be used if the NRPE daemon was compiled with support for
+# command arguments *AND* the dont_blame_nrpe directive in this
+# config file is set to '1'. This poses a potential security risk, so
+# make sure you read the SECURITY file before doing this.
+
+#command[check_users]=/usr/lib64/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
+#command[check_load]=/usr/lib64/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
+#command[check_disk]=/usr/lib64/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+#command[check_procs]=/usr/lib64/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
# number. The file is only written if the NRPE daemon is started by the root
# user and is running in standalone mode.
-pid_file=/var/run/nrpe.pid
+pid_file=/run/nrpe.pid
+# BASH COMMAND SUBTITUTION
+# This option determines whether or not the NRPE daemon will allow clients
+# to specify arguments that contain bash command substitutions of the form
+# $(...). This option only works if the daemon was configured with both
+# the --enable-command-args and --enable-bash-command-substitution configure
+# script options.
+#
+# *** ENABLING THIS OPTION IS A HIGH SECURITY RISK! ***
+# Read the SECURITY file for information on some of the security implications
+# of enabling this variable.
+#
+# Values: 0=do not allow bash command substitutions,
+# 1=allow bash command substitutions
+
+allow_bash_command_substitution=0
+
+
+
# COMMAND PREFIX
# This option allows you to prefix all commands with a user-defined string.
# A space is automatically added between the specified prefix string and the
exec="/usr/sbin/kadmind"
depend() {
- need net mit-krb5kdc
+ need mit-krb5kdc
+ use net
}
start() {
exec="/usr/sbin/krb5kdc"
depend() {
- need net
+ use net
}
start() {
exec="/usr/sbin/kpropd"
depend() {
- need net
- use mit-krb5kdc mit-krb5kadmind
+ use net mit-krb5kdc mit-krb5kadmind
}
start() {
#!/sbin/runscript
-# Copyright 1999-2012 Gentoo Foundation
+# Copyright 1999-2013 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nrpe/files/nrpe.init,v 1.2 2012/10/22 02:35:52 flameeyes Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nrpe/files/nrpe.init,v 1.3 2013/01/25 17:43:36 flameeyes Exp $
: ${CFGFILE:=/etc/nagios/nrpe.cfg}
+# BASH COMMAND SUBTITUTION
+# This option determines whether or not the NRPE daemon will allow clients
+# to specify arguments that contain bash command substitutions of the form
+# $(...). This option only works if the daemon was configured with both
+# the --enable-command-args and --enable-bash-command-substitution configure
+# script options.
+#
+# *** ENABLING THIS OPTION IS A HIGH SECURITY RISK! ***
+# Read the SECURITY file for information on some of the security implications
+# of enabling this variable.
+#
+# Values: 0=do not allow bash command substitutions,
+# 1=allow bash command substitutions
+
+allow_bash_command_substitution=0
+
+
+
# COMMAND PREFIX
# This option allows you to prefix all commands with a user-defined string.
# A space is automatically added between the specified prefix string and the
SINGLE-VALUE)
+##### Policy attribute flags
+
+attributetype ( 1.2.840.113554.1.4.1.6.2
+ NAME 'krbPwdAttributes'
+ EQUALITY integerMatch
+ SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
+ SINGLE-VALUE)
+
+
+##### Policy maximum ticket lifetime
+
+attributetype ( 1.2.840.113554.1.4.1.6.3
+ NAME 'krbPwdMaxLife'
+ EQUALITY integerMatch
+ SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
+ SINGLE-VALUE)
+
+
+##### Policy maximum ticket renewable lifetime
+
+attributetype ( 1.2.840.113554.1.4.1.6.4
+ NAME 'krbPwdMaxRenewableLife'
+ EQUALITY integerMatch
+ SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
+ SINGLE-VALUE)
+
+
+##### Allowed enctype:salttype combinations for key changes
+
+attributetype ( 1.2.840.113554.1.4.1.6.5
+ NAME 'krbPwdAllowedKeysalts'
+ EQUALITY caseIgnoreIA5Match
+ SYNTAX 1.3.6.1.4.1.1466.115.121.1.26
+ SINGLE-VALUE)
+
+
##### FDN pointing to a Kerberos Password Policy object
attributetype ( 2.16.840.1.113719.1.301.4.36.1
NAME 'krbPwdPolicy'
SUP top
MUST ( cn )
- MAY ( krbMaxPwdLife $ krbMinPwdLife $ krbPwdMinDiffChars $ krbPwdMinLength $ krbPwdHistoryLength $ krbPwdMaxFailure $ krbPwdFailureCountInterval $ krbPwdLockoutDuration ) )
+ MAY ( krbMaxPwdLife $ krbMinPwdLife $ krbPwdMinDiffChars $ krbPwdMinLength $ krbPwdHistoryLength $ krbPwdMaxFailure $ krbPwdFailureCountInterval $ krbPwdLockoutDuration $ krbPwdAttributes $ krbPwdMaxLife $ krbPwdMaxRenewableLife $ krbPwdAllowedKeysalts ) )
##### The krbTicketPolicyAux holds Kerberos ticket policy attributes.
projects / config / helga / etc.git / commitdiff