--- /dev/null
+# davfs2 configuration file 2012-07-19
+# version 9
+# ------------------------------------
+
+# Copyright (C) 2006, 2007, 2008, 2009, 2012 Werner Baumann
+
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice
+# and this notice are preserved.
+
+
+# Please read the davfs2.conf (5) man page for a description of the
+# configuration options and syntax rules.
+
+
+# Available options and default values
+# ====================================
+
+# General Options
+# ---------------
+
+# dav_user davfs2 # system wide config file only
+# dav_group davfs2 # system wide config file only
+# kernel_fs fuse
+# buf_size 16 # KiByte
+
+# WebDAV Related Options
+# ----------------------
+
+# use_proxy 1 # system wide config file only
+# proxy # system wide config file only
+# servercert
+# clientcert
+# secrets ~/.davfs2/secrets # user config file only
+# ask_auth 1
+# use_locks 1
+# lock_owner <user-name>
+# lock_timeout 1800 # seconds
+# lock_refresh 60 # seconds
+# use_expect100 0
+# if_match_bug 0
+# drop_weak_etags 0
+# allow_cookie 0
+# precheck 1
+# ignore_dav_header 0
+# server_charset
+# connect_timeout 10 # seconds
+# read_timeout 30 # seconds
+# retry 30 # seconds
+# max_retry 300 # seconds
+# add_header
+
+# Cache Related Options
+# ---------------------
+
+# backup_dir lost+found
+# cache_dir /var/cache/davfs2 # system wide cache
+# ~/.davfs2/cache # per user cache
+# cache_size 50 # MiByte
+# table_size 1024
+# dir_refresh 60 # seconds
+# file_refresh 1 # second
+# delay_upload 10
+# gui_optimize 0
+
+# Debugging Options
+# -----------------
+
+# debug # possible values: config, kernel, cache, http, xml,
+ # httpauth, locks, ssl, httpbody, secrets, most
+
+[/mnt/hidrive]
+
+dav_user frank
+dav_group users
+ask_auth 0
+
--- /dev/null
+# davfs2 configuration file 2014-08-10
+# version 12
+# ------------------------------------
+
+# Copyright (C) 2006, 2007, 2008, 2009, 2012, 2013, 2014 Werner Baumann
+
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice
+# and this notice are preserved.
+
+
+# Please read the davfs2.conf (5) man page for a description of the
+# configuration options and syntax rules.
+
+
+# Available options and default values
+# ====================================
+
+# General Options
+# ---------------
+
+# dav_user davfs2 # system wide config file only
+# dav_group davfs2 # system wide config file only
+# kernel_fs fuse
+# buf_size 16 # KiByte
+
+# WebDAV Related Options
+# ----------------------
+
+# use_proxy 1 # system wide config file only
+# proxy # system wide config file only
+# trust_ca_cert
+# servercert # deprecated: use trust_ca_cert
+# trust_server_cert
+# clientcert
+# secrets ~/.davfs2/secrets # user config file only
+# ask_auth 1
+# use_locks 1
+# lock_owner <user-name>
+# lock_timeout 1800 # seconds
+# lock_refresh 60 # seconds
+# use_expect100 0
+# if_match_bug 0
+# drop_weak_etags 0
+# n_cookies 0
+# precheck 1
+# ignore_dav_header 0
+# use_compression 0
+# min_propset 0
+# follow_redirect 0
+# server_charset
+# connect_timeout 10 # seconds
+# read_timeout 30 # seconds
+# retry 30 # seconds
+# max_retry 300 # seconds
+# add_header
+
+# Cache Related Options
+# ---------------------
+
+# backup_dir lost+found
+# cache_dir /var/cache/davfs2 # system wide cache
+# ~/.davfs2/cache # per user cache
+# cache_size 50 # MiByte
+# table_size 1024
+# dir_refresh 60 # seconds
+# file_refresh 1 # second
+# delay_upload 10
+# gui_optimize 0
+# minimize_mem 0
+
+# Debugging Options
+# -----------------
+
+# debug # possible values: config, kernel, cache, http, xml,
+ # httpauth, locks, ssl, httpbody, secrets, most
+
--- /dev/null
+# davfs2 secrets file 2009-10-18
+# version 4
+# -------------------------------
+
+# Copyright (C) 2006, 2007, 2008, 2009 Werner Baumann
+
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice
+# and this notice are preserved.
+
+
+# # This file must be readable and writeable by the owner only (mode 0600).
+
+# This file contains user-name and password for the proxy, the
+# WebDAV resources and decryption passwords for client certificates.
+
+# Comments are indicated by a '#' character and the rest of the line
+# is ignored. Empty lines are ignored too.
+
+# Each line consists of two or three items separated by spaces or tabs.
+# If an item contains one of the characters space, tab, #, \ or ", this
+# character must be escaped by a preceding \. Alternatively, the item
+# may be enclosed in double quotes. (see also the davfs2.conf (5) man page)
+
+
+# Proxy Line
+# ----------
+# A proxy line consists of the fully qualified domain name of the proxy,
+# the user-name and the password. The proxy name must not contain a scheme
+# or path segment, but a port number should be added, separated by a colon.
+# The password my be omitted.
+# Instead of the name of the proxy, the keyword "proxy" may be used.
+
+# Examples
+# foo.bar:3245 otto my\ secret
+# foo.bar otto "my secret"
+# proxy otto "my secret"
+
+
+# Credential Line
+# ---------------
+# A credential line consists of the mount-point, the user-name and
+# the password. The mount-point must be an absolute path, starting
+# with /. The password may be omitted.
+# For compatibility with older versions, instead of the mount-point
+# the URL may be given. The URL must contain scheme, fully qualified
+# domain name and path. If the path segment is missing, / is assumed.
+
+# Examples
+# /home/otto/foo otto g3H\"x\ 7z\\
+# /media/dav/bar otto geheim
+# Old style
+# "http://foo.bar/my documents" otto "geh # heim"
+# https://foo.bar:333/dav otto geh\ \#\ heim
+
+/mnt/hidrive frank.brehm 5eZXG-Ec
+
+
+# Password for Client Certificate
+# -------------------------------
+# It must contain the name of the certificate file and the encryption
+# password. The name must be either absolute (starting with /) or the
+# file-name only. If it is not absolute, it is assumed to be in the
+# standard directory for client certificates.
+
+# Examples
+# /home/otto/.davfs2/certs/private/otto.crt geheim
+# otto_private.crt "this is extraordinary secret"
+# "otto private.crt" this\ is\ secret,\ too.
+
--- /dev/null
+# davfs2 secrets file 2009-10-18
+# version 4
+# -------------------------------
+
+# Copyright (C) 2006, 2007, 2008, 2009 Werner Baumann
+
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice
+# and this notice are preserved.
+
+
+# # This file must be readable and writeable by the owner only (mode 0600).
+
+# This file contains user-name and password for the proxy, the
+# WebDAV resources and decryption passwords for client certificates.
+
+# Comments are indicated by a '#' character and the rest of the line
+# is ignored. Empty lines are ignored too.
+
+# Each line consists of two or three items separated by spaces or tabs.
+# If an item contains one of the characters space, tab, #, \ or ", this
+# character must be escaped by a preceding \. Alternatively, the item
+# may be enclosed in double quotes. (see also the davfs2.conf (5) man page)
+
+
+# Proxy Line
+# ----------
+# A proxy line consists of the fully qualified domain name of the proxy,
+# the user-name and the password. The proxy name must not contain a scheme
+# or path segment, but a port number should be added, separated by a colon.
+# The password my be omitted.
+# Instead of the name of the proxy, the keyword "proxy" may be used.
+
+# Examples
+# foo.bar:3245 otto my\ secret
+# foo.bar otto "my secret"
+# proxy otto "my secret"
+
+
+# Credential Line
+# ---------------
+# A credential line consists of the mount-point, the user-name and
+# the password. The mount-point must be an absolute path, starting
+# with /. The password may be omitted.
+# For compatibility with older versions, instead of the mount-point
+# the URL may be given. The URL must contain scheme, fully qualified
+# domain name and path. If the path segment is missing, / is assumed.
+
+# Examples
+# /home/otto/foo otto g3H\"x\ 7z\\
+# /media/dav/bar otto geheim
+# Old style
+# "http://foo.bar/my documents" otto "geh # heim"
+# https://foo.bar:333/dav otto geh\ \#\ heim
+
+
+# Password for Client Certificate
+# -------------------------------
+# It must contain the name of the certificate file and the encryption
+# password. The name must be either absolute (starting with /) or the
+# file-name only. If it is not absolute, it is assumed to be in the
+# standard directory for client certificates.
+
+# Examples
+# /home/otto/.davfs2/certs/private/otto.crt geheim
+# otto_private.crt "this is extraordinary secret"
+# "otto private.crt" this\ is\ secret,\ too.
+
#SSD_NICELEVEL="-19"
# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
#rc_ulimit="-u 30"
# It's possible to define extra dependencies for services like so
# LINUX SPECIFIC OPTIONS
# This is the subsystem type. Valid options on Linux:
-# "" - nothing special
-# "lxc" - Linux Containers
-# "openvz" - Linux OpenVZ
-# "prefix" - Prefix
-# "uml" - Usermode Linux
-# "vserver" - Linux vserver
-# "xen0" - Xen0 Domain
-# "xenU" - XenU Domain
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "systemd-nspawn" - Container created by the systemd-nspawn utility
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# The default value is: /var/log/rc.log
rc_log_path="/var/log/rc.log"
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
# By default we filter the environment for our running scripts. To allow other
# variables through, add them here. Use a * to allow all variables through.
#rc_env_allow="VAR1 VAR2"
#rc_crashed_stop=NO
#rc_crashed_start=YES
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
##############################################################################
# MISC CONFIGURATION VARIABLES
# There variables are shared between many init scripts
# Below is the default list of network fstypes.
#
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# nfs nfs4 ocfs2 shfs smbfs
#
# If you would like to add to this list, you can do so by adding your
# WARNING: whilst we have improved parallel, it can still potentially lock
# the boot process. Don't file bugs about this unless you can supply
# patches that fix it without breaking other things!
-#rc_parallel="NO"
-rc_parallel="YES"
+rc_parallel="NO"
+#rc_parallel="YES"
# Set rc_interactive to "YES" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "NO" to disable
# Set unicode to YES to turn on unicode support for keyboards and screens.
unicode="YES"
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but it can be adjusted here.
+#rc_fuser_timeout=60
+
# Below is the default list of network fstypes.
#
# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
-#export SSD_NICELEVEL="-19"
+#SSD_NICELEVEL="-19"
# Pass ulimit parameters
#rc_ulimit="-u 30"
#rc_foo_bar_need="openvpn"
#rc_foo_bar_after="clock"
+rc_local_after="mta"
+
# You can also remove dependencies.
# This is mainly used for saying which servies do NOT provide net.
#rc_net_tap0_provide="!net"
# consolefont, numlock, etc ...)
rc_tty_number=12
+##############################################################################
+# CGROUPS RESOURCE MANAGEMENT
+
# If you have cgroups turned on in your kernel, this switch controls
# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
-# Support for process management by cgroups is planned in the future,
-# so if you turn this off, be aware that you may not be able to use that
-# feature.
+# None of the other options in this section work if this is set to "NO".
#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"
rc_tty_number=12
# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controler is mounted under
+# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
# Support for process management by cgroups is planned in the future,
# so if you turn this off, be aware that you may not be able to use that
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
#rc_foo_need="openvpn"
#rc_foo_after="clock"
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
# You can also remove dependencies.
# This is mainly used for saying which servies do NOT provide net.
#rc_net_tap0_provide="!net"
# "vserver" - Linux vserver
# "xen0" - Xen0 Domain
# "xenU" - XenU Domain
-# If this is commented out, automatic detection will be attempted.
-# Note that autodetection will not work in a prefix environment or in a
-# linux container.
+# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# PRESENTLY in, not the virtualization the environment is capable of.
# consolefont, numlock, etc ...)
rc_tty_number=12
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controler is mounted under
+# /sys/fs/cgroup.
+# Support for process management by cgroups is planned in the future,
+# so if you turn this off, be aware that you may not be able to use that
+# feature.
+#rc_controller_cgroups="YES"
--- /dev/null
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+rc_parallel="YES"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+rc_shell=/sbin/sulogin
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+rc_log_path="/var/log/rc.log"
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+unicode="YES"
+
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#export SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on Linux:
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
+# If this is commented out, automatic detection will be attempted.
+# Note that autodetection will not work in a prefix environment or in a
+# linux container.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+rc_sys=""
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+
# Set the devices controller settings for this service.
#rc_cgroup_devices=""
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
# Set the memory controller settings for this service.
#rc_cgroup_memory=""
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
# Set the net_prio controller settings for this service.
#rc_cgroup_net_prio=""
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
# Set this to YES if yu want all of the processes in a service's cgroup
# killed when the service is stopped or restarted.
# This should not be set globally because it kills all of the service's
-# davfs2 configuration file 2012-07-19
-# version 9
+# davfs2 configuration file 2014-08-10
+# version 12
# ------------------------------------
-# Copyright (C) 2006, 2007, 2008, 2009, 2012 Werner Baumann
+# Copyright (C) 2006, 2007, 2008, 2009, 2012, 2013, 2014 Werner Baumann
# Copying and distribution of this file, with or without modification, are
# permitted in any medium without royalty provided the copyright notice
# use_proxy 1 # system wide config file only
# proxy # system wide config file only
-# servercert
+# trust_ca_cert
+# servercert # deprecated: use trust_ca_cert
+# trust_server_cert
# clientcert
# secrets ~/.davfs2/secrets # user config file only
# ask_auth 1
# use_expect100 0
# if_match_bug 0
# drop_weak_etags 0
-# allow_cookie 0
+# n_cookies 0
# precheck 1
# ignore_dav_header 0
+# use_compression 0
+# min_propset 0
+# follow_redirect 0
# server_charset
# connect_timeout 10 # seconds
# read_timeout 30 # seconds
# file_refresh 1 # second
# delay_upload 10
# gui_optimize 0
+# minimize_mem 0
# Debugging Options
# -----------------
# Set the devices controller settings for this service.
#rc_cgroup_devices=""
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
# Set the memory controller settings for this service.
#rc_cgroup_memory=""
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
# Set the net_prio controller settings for this service.
#rc_cgroup_net_prio=""
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
# Set this to YES if yu want all of the processes in a service's cgroup
# killed when the service is stopped or restarted.
# This should not be set globally because it kills all of the service's
projects / config / bruni / etc.git / commitdiff