maybe chmod 0644 'config-archive/etc/logrotate.conf'
maybe chmod 0644 'config-archive/etc/logrotate.conf.dist.new'
maybe chmod 0755 'config-archive/etc/logrotate.d'
+maybe chmod 0644 'config-archive/etc/logrotate.d/rsyslog'
+maybe chmod 0644 'config-archive/etc/logrotate.d/rsyslog.dist.new'
maybe chmod 0644 'config-archive/etc/logrotate.d/syslog-ng'
maybe chmod 0644 'config-archive/etc/logrotate.d/syslog-ng.dist.new'
maybe chmod 0755 'config-archive/etc/lvm'
maybe chmod 0644 'config-archive/etc/rc.conf.5'
maybe chmod 0644 'config-archive/etc/rc.conf.6'
maybe chmod 0644 'config-archive/etc/rc.conf.dist'
+maybe chmod 0644 'config-archive/etc/rsyslog.conf'
+maybe chmod 0644 'config-archive/etc/rsyslog.conf.dist.new'
+maybe chmod 0755 'config-archive/etc/rsyslog.d'
+maybe chmod 0644 'config-archive/etc/rsyslog.d/50-default.conf'
+maybe chmod 0644 'config-archive/etc/rsyslog.d/50-default.conf.dist.new'
maybe chmod 0755 'config-archive/etc/salt'
maybe chmod 0644 'config-archive/etc/salt/master'
maybe chmod 0644 'config-archive/etc/salt/master.1'
--- /dev/null
+# Uncomment the following directive if you have re-enabled
+# "/var/log/syslog" in "/etc/rsyslog.d/50-default.conf"
+#/var/log/syslog
+#{
+# rotate 7
+# daily
+# missingok
+# notifempty
+# delaycompress
+# compress
+# postrotate
+# test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+# endscript
+#}
+
+#/var/log/auth.log
+#/var/log/cron.log
+#/var/log/daemon.log
+#/var/log/kern.log
+#/var/log/lpr.log
+#/var/log/mail.log
+#/var/log/news.log
+#/var/log/user.log
+#/var/log/debug.log
+#/var/log/messages
+#{
+# rotate 4
+# weekly
+# missingok
+# notifempty
+# compress
+# delaycompress
+# sharedscripts
+# postrotate
+# test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+# endscript
+#}
+
+/var/log/messages /var/log/syslog {
+ daily
+ missingok
+ olddir /var/log/.old
+ size 1024K
+ sharedscripts
+ postrotate
+ test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+ endscript
+}
+
+/var/log/syslog.d/*.log {
+ daily
+ missingok
+ olddir /var/log/syslog.d/.old
+ size 1024K
+ maxage 1y
+ sharedscripts
+ postrotate
+ test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+ endscript
+}
+
+/var/log/debug.log /var/log/debug /var/log/all /var/log/all.log {
+ daily
+ missingok
+ olddir /var/log/.old
+ size 4M
+ maxage 6m
+ sharedscripts
+ postrotate
+ test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+ endscript
+}
+
+
--- /dev/null
+# Uncomment the following directive if you have re-enabled
+# "/var/log/syslog" in "/etc/rsyslog.d/50-default.conf"
+#/var/log/syslog
+#{
+# rotate 7
+# daily
+# missingok
+# notifempty
+# delaycompress
+# compress
+# postrotate
+# test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+# endscript
+#}
+
+/var/log/auth.log
+/var/log/cron.log
+/var/log/daemon.log
+/var/log/kern.log
+/var/log/lpr.log
+/var/log/mail.log
+/var/log/news.log
+/var/log/user.log
+/var/log/debug.log
+/var/log/messages
+{
+ rotate 4
+ weekly
+ missingok
+ notifempty
+ compress
+ delaycompress
+ sharedscripts
+ postrotate
+ test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+ endscript
+}
--- /dev/null
+# /etc/rsyslog.conf
+#
+# This configuration is based on RainerScript, the new recommended syntax
+# for RSYSLOG. See http://www.rsyslog.com/doc/rainerscript.html for further
+# details.
+#
+# But if you don't want to learn something new at moment, don't worry: The
+# legacy syntax is still supported.
+#
+# You may want to use the new RSYSLOG configuration builder to create your
+# own more advanced configuration: http://www.rsyslog.com/rsyslog-configuration-builder/
+
+# Check config syntax on startup and abort if unclean (default: off)
+$AbortOnUncleanConfig on
+
+
+###############
+### MODULES ###
+###############
+
+# Read syslog messages from default Unix socket /dev/log (e.g. via logger command)
+module(load="imuxsock")
+
+# Read messages from the kernel log and submits them to the syslog engine
+module(load="imklog")
+
+# Inject "--MARK--" messages every $Interval (seconds)
+module(load="immark" Interval="3600")
+
+# Read syslog messages from UDP
+#module(load="imudp")
+#input(type="imudp" port="514")
+
+# Read syslog messages from TCP
+#module(load="imtcp")
+#input(type="imtcp" port="514")
+
+module(load="impstats"
+ interval="43200"
+ severity="7"
+ log.syslog="off"
+ /* need to turn log stream logging off! */
+ log.file="/var/log/syslog.d/stats.log")
+
+
+#########################
+### GLOBAL DIRECTIVES ###
+#########################
+
+# Where to place spool and state files
+$WorkDirectory /var/spool/rsyslog
+
+# Reduce repeating messages (default: off)
+#$RepeatedMsgReduction on
+
+# Set defaults for every output file
+$Umask 0022
+
+module(
+ load="builtin:omfile"
+ Template="RSYSLOG_FileFormat"
+ FileCreateMode="0644"
+ DirCreateMode="0755"
+ fileOwnerNum="0"
+ fileGroupNum="0"
+ dirOwnerNum="0"
+ dirGroupNum="0"
+)
+
+
+# Include all conf files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
--- /dev/null
+# /etc/rsyslog.conf
+#
+# This configuration is based on RainerScript, the new recommended syntax
+# for RSYSLOG. See http://www.rsyslog.com/doc/rainerscript.html for further
+# details.
+#
+# But if you don't want to learn something new at moment, don't worry: The
+# legacy syntax is still supported.
+#
+# You may want to use the new RSYSLOG configuration builder to create your
+# own more advanced configuration: http://www.rsyslog.com/rsyslog-configuration-builder/
+
+# Check config syntax on startup and abort if unclean (default: off)
+#$AbortOnUncleanConfig on
+
+
+###############
+### MODULES ###
+###############
+
+# Read syslog messages from default Unix socket /dev/log (e.g. via logger command)
+module(load="imuxsock")
+
+# Read messages from the kernel log and submits them to the syslog engine
+module(load="imklog")
+
+# Inject "--MARK--" messages every $Interval (seconds)
+#module(load="immark" Interval="600")
+
+# Read syslog messages from UDP
+#module(load="imudp")
+#input(type="imudp" port="514")
+
+# Read syslog messages from TCP
+#module(load="imtcp")
+#input(type="imtcp" port="514")
+
+
+#########################
+### GLOBAL DIRECTIVES ###
+#########################
+
+# Where to place spool and state files
+$WorkDirectory /var/spool/rsyslog
+
+# Reduce repeating messages (default: off)
+#$RepeatedMsgReduction on
+
+# Set defaults for every output file
+$Umask 0022
+
+module(
+ load="builtin:omfile"
+ Template="RSYSLOG_TraditionalFileFormat"
+ FileCreateMode="0644"
+ DirCreateMode="0755"
+)
+
+
+# Include all conf files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
--- /dev/null
+#######################
+### DEFAULT ACTIONS ###
+#######################
+
+#auth,authpriv.* action(
+# type="omfile"
+# File="/var/log/auth.log"
+# FileCreateMode="0600"
+# FileOwner="root"
+# FileGroup="adm"
+# Sync="off"
+#)
+
+#cron.* action(
+# type="omfile"
+# File="/var/log/cron.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#daemon.* action(
+# type="omfile"
+# File="/var/log/daemon.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#kern.* action(
+# type="omfile"
+# File="/var/log/kern.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#lpr.* action(
+# type="omfile"
+# File="/var/log/lpr.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#mail.* action(
+# type="omfile"
+# File="/var/log/mail.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#news.* action(
+# type="omfile"
+# File="/var/log/news.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+#user.* action(
+# type="omfile"
+# File="/var/log/user.log"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+*.=debug;auth,authpriv,news,mail.none action(
+ type="omfile"
+ File="/var/log/debug.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+*.info;auth,authpriv,cron,daemon,lpr,mail,news.none action(
+ type="omfile"
+ File="/var/log/messages"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+# Uncomment the following directive to re-enable the
+# deprecated "/var/log/syslog" log file (don't forget to re-enable log
+# rotation in "/etc/logrotate.d/rsyslog" if you do that!)
+#*.*;auth,authpriv.none action(
+# type="omfile"
+# File="/var/log/syslog"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+*.emerg action(
+ type="omusrmsg"
+ Users="*"
+ action.execOnlyOnceEveryInterval="10"
+)
+
+# Create an additional socket for the default chroot location
+# (used by net-misc/openssh[hpn], see https://bugs.gentoo.org/490744)
+input(type="imuxsock" Socket="/var/empty/dev/log")
--- /dev/null
+#######################
+### DEFAULT ACTIONS ###
+#######################
+
+auth,authpriv.* action(
+ type="omfile"
+ File="/var/log/auth.log"
+ FileCreateMode="0600"
+ FileOwner="root"
+ FileGroup="adm"
+ Sync="off"
+)
+
+cron.* action(
+ type="omfile"
+ File="/var/log/cron.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+daemon.* action(
+ type="omfile"
+ File="/var/log/daemon.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+kern.* action(
+ type="omfile"
+ File="/var/log/kern.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+lpr.* action(
+ type="omfile"
+ File="/var/log/lpr.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+mail.* action(
+ type="omfile"
+ File="/var/log/mail.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+news.* action(
+ type="omfile"
+ File="/var/log/news.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+user.* action(
+ type="omfile"
+ File="/var/log/user.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+*.=debug;auth,authpriv,news,mail.none action(
+ type="omfile"
+ File="/var/log/debug.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+*.info;auth,authpriv,cron,daemon,lpr,mail,news.none action(
+ type="omfile"
+ File="/var/log/messages"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+# Uncomment the following directive to re-enable the
+# deprecated "/var/log/syslog" log file (don't forget to re-enable log
+# rotation in "/etc/logrotate.d/rsyslog" if you do that!)
+#*.*;auth,authpriv.none action(
+# type="omfile"
+# File="/var/log/syslog"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+*.emerg action(
+ type="omusrmsg"
+ Users="*"
+ action.execOnlyOnceEveryInterval="10"
+)
+
+# Create an additional socket for the default chroot location
+# (used by net-misc/openssh[hpn], see https://bugs.gentoo.org/490744)
+input(type="imuxsock" Socket="/var/empty/dev/log")
projects / config / weimar / etc.git / commitdiff