--- /dev/null
+# Configuration file for genkernel
+
+# This file is sourced by genkernel at startup and determines which options
+# we will be using to compile our kernel. The order of precidence is simple,
+# with the internal settings being least important, configuration file
+# settings next, and command line options being most important.
+
+# =========Common Command Line Option Defaults=========
+
+# Should we install to $BOOTDIR? Default is "no" because genkernel is used in
+# catalyst and stage building.
+#INSTALL="yes"
+
+# Run 'make oldconfig' before compiling this kernel?
+OLDCONFIG="yes"
+
+# Run 'make menuconfig' before compiling this kernel?
+MENUCONFIG="no"
+
+# Run 'make nconfig' (ncurses 'menuconfig') before compiling this kernel?
+NCONFIG="no"
+
+# Note, that two previous lines are mutual exclusive (logically), while
+# MENUCONFIG has a higher priority if both them is enabled.
+
+# Run 'make clean' before compilation?
+# If set to NO, implies MRPROPER WILL NOT be run
+# Also, if clean is NO, it won't copy over any configuration
+# file, it will use what's there.
+CLEAN="yes"
+
+# Run 'make mrproper' before configuration/compilation?
+MRPROPER="yes"
+
+# Override the arch detection?
+#ARCH_OVERRIDE="x86"
+
+# Mount BOOTDIR automatically if it isn't mounted?
+MOUNTBOOT="yes"
+
+# Make symlinks in BOOTDIR automatically?
+#SYMLINK="no"
+
+# Save the new configuration in /etc/kernels upon
+# successfull compilation
+SAVE_CONFIG="yes"
+
+# Use Color output in Genkernel?
+USECOLOR="yes"
+
+# Clear build cache dir
+#CLEAR_CACHE_DIR="yes"
+
+# Clear all tmp files and caches after genkernel has run
+#POSTCLEAR="1"
+
+# Genkernel uses an independent configuration for MAKEOPTS, and does not source
+# /etc/make.conf . You can override the default setting by uncommenting and
+# tweaking the following line. Default setting is set up by
+# ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
+# argument is: <number of processors>*<number of cores per processor>+1
+#MAKEOPTS="-j2"
+
+# Add in LVM support from static binaries if they exist on the system, or
+# compile static LVM binaries if static ones do not exist.
+#LVM="no"
+
+# Add in Luks support. Needs sys-fs/cryptsetup with -dynamic installed.
+#LUKS="no"
+
+# Add in GnuPG support
+#GPG="no"
+
+# Add DMRAID support.
+#DMRAID="no"
+
+# Include (or suppresses the inclusion of) busybox in the initrd or initramfs.
+# If included, busybox is rebuilt if the cached copy is out of date.
+#BUSYBOX="yes"
+
+# Use udev instead of mdev as the default device manager for the initramfs.
+# If you use systemd and perhaps lvm, you _must_ keep this turned on.
+#UDEV="yes"
+
+# Includes mdadm/mdmon binaries in initramfs.
+# Without sys-fs/mdadm[static] installed, this will build a static mdadm.
+#MDADM="no"
+
+# Specify a custom mdadm.conf.
+# By default the ramdisk will be built *without* an mdadm.conf and will auto-detect
+# arrays during bootup. Usually, this should not be needed.
+#MDADM_CONFIG="/etc/mdadm.conf"
+
+# Add Multipath support.
+#MULTIPATH="no"
+
+# Add iSCSI support.
+#ISCSI="no"
+
+# Add e2fsprogs support.
+#E2FSPROGS="no"
+
+# Install firmware onto root filesystem
+# Will conflict with sys-kernel/linux-firmware package
+#FIRMWARE_INSTALL="no"
+
+# Enable copying of firmware into initramfs
+#FIRMWARE="no"
+# Specify directory to pull from
+# FIRMWARE_SRC="/lib/firmware"
+# Specify specific firmware files to include. This overrides FIRMWARE_SRC
+# FIRMWARE_FILES=""
+
+# Add new kernel to grub?
+#BOOTLOADER="grub"
+
+# Enable splashutils in early space (initrd). Default is "no".
+#SPLASH="yes"
+
+# Use this splash theme. If commented out - the "default" name theme is used.
+# Also, SPLASH="yes" needs to be enabled for this one to one work.
+# This supersedes the "SPLASH_THEME" option of /etc/conf.d/splash (in early space).
+#SPLASH_THEME="gentoo"
+
+# Installs, or not, plymouth into the initramfs. If "splash" will be
+# passed at boot, plymouth will be activated.
+# PLYMOUTH="yes"
+
+# Embeds the given plymouth theme into the initramfs.
+# PLYMOUTH_THEME="text"
+
+# =========Keymap Settings=========
+#
+# Force keymap selection at boot
+#DOKEYMAPAUTO="yes"
+
+
+# Disables keymap selection support
+#KEYMAP="0"
+
+
+# =========Low Level Compile Settings=========
+#
+# GNU Make to use for kernel. See also the --kernel-make command line option.
+#KERNEL_MAKE="make"
+
+# Compiler to use for the kernel (e.g. distcc). See also the --kernel-cc
+# command line option.
+#KERNEL_CC="gcc"
+
+# Assembler to use for the kernel. See also the --kernel-as command line
+# option.
+#KERNEL_AS="as"
+
+# Linker to use for the kernel. See also the --kernel-ld command line option.
+#KERNEL_LD="ld"
+
+# GNU Make to use for the utilities. See also the --utils-make command line
+# option.
+#UTILS_MAKE="make"
+
+# Compiler to use for the utilities (e.g. distcc). See also the --utils-cc
+# command line option.
+#UTILS_CC="gcc"
+
+# Assembler to use for the utilities. See also the --utils-as command line
+# option.
+#UTILS_AS="as"
+
+# Linker to use for the utilities. See also the --utils-ld command line
+# option.
+#UTILS_LD="ld"
+
+# =========GENKERNEL LOCATION CONFIGURATION============
+# Variables:
+# %%ARCH%% - Final determined architecture
+# %%CACHE%% - Final determined cache location
+
+# Set genkernel's temporary work directory. Default is /var/tmp/genkernel
+#TMPDIR="/var/tmp/genkernel"
+
+# Set the boot directory, default is /boot
+#BOOTDIR="/boot"
+
+# Default share directory location
+GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
+
+# Location of the default cache
+CACHE_DIR="/var/cache/genkernel"
+# Location of DISTDIR, where our source tarballs are stored
+DISTDIR="/var/lib/genkernel/src"
+# Log output file
+LOGFILE="/var/log/genkernel.log"
+# Debug Level
+LOGLEVEL=1
+
+# =========COMPILED UTILS CONFIGURATION============
+#
+# Default location of kernel source
+DEFAULT_KERNEL_SOURCE="/usr/src/linux"
+# Default kernel config (only use to override using
+# arch/%%ARCH%%/kernel-config-${VER}.${PAT} !)
+#DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-config"
+
+# Specifies a user created busybox config
+#BUSYBOX_CONFIG="/path/to/file"
+#BUSYBOX_APPLETS="[ ash sh mount uname echo cut cat"
+
+# NOTE: Since genkernel 3.4.41 the version of
+# busybox, lvm, mdadm, .. have been moved to
+# /usr/share/genkernel/defaults/software.sh in order to
+# reduce the merging you have to do during etc-update.
+# You can still override these settings in here.
+
+
+# =========MISC KERNEL CONFIGURATION============
+#
+# Tag the kernel and ramdisk with a name:
+# If not defined the option defaults to
+# 'genkernel'
+#KNAME="genkernel"
+
+# Append a text to the kernel/initrd's name,
+# usefull to add a unique key like the actual date
+#KAPPENDNAME="-$(date +%Y%m%d-%H%M%S)"
+
+
+# This option is only valid if kerncache is
+# defined. If there is a valid kerncache no checks
+# will be made against a kernel source tree
+#KERNEL_SOURCES="0"
+
+
+# Build a static (monolithic kernel)
+#BUILD_STATIC="1"
+
+
+# Make and install kernelz image (PowerPC)
+#GENZIMAGE="1"
+
+
+# File to output a .tar.bz2'd kernel contents
+# of /lib/modules/ and the kernel config
+# NOTE: This is created before the callbacks
+# are run!
+#KERNCACHE="/path/to/file"
+
+
+# Prefix to kernel module destination, modules
+# will be installed in <prefix>/lib/modules
+# (.conf equivalent of --module-prefix=<dir>)
+#INSTALL_MOD_PATH=""
+
+
+# =========MISC INITRD CONFIGURATION============
+#
+# Copy all kernel modules to the ramdisk
+#ALLRAMDISKMODULES="1"
+
+
+# Don't copy any modules to the ramdisk
+#RAMDISKMODULES="0"
+
+
+# File to output a .tar.bz2'd kernel and ramdisk:
+# No modules outside of the ramdisk will be
+# included...
+#MINKERNPACKAGE="/path/to/file.bz2"
+
+
+# File to output a .tar.bz2'd modules after the
+# callbacks have run
+#MODULESPACKAGE="/path/to/file.bz2"
+
+
+# Directory structure to include in the initramfs,
+# only available on >=2.6 kernels
+#INITRAMFS_OVERLAY=""
+
+
+# Build the generated initramfs into the kernel instead of
+# keeping it as a separate file
+#INTEGRATED_INITRAMFS="1"
+
+
+# Compress generated initramfs
+#COMPRESS_INITRD="yes"
+# Types of compression: best, xz, lzma, bzip2, gzip, lzop, fastest
+# "best" selects the best available compression method
+# "fastest" selects the fastest available compression method
+#COMPRESS_INITRD_TYPE="best"
+
+
+# Create a self-contained env in the initramfs
+#NETBOOT="1"
+
+
+# =========MISC BOOT CONFIGURATION============
+#
+# Specify a default for real_root=
+#REAL_ROOT="/dev/one/two/gentoo"
projects / config / berta / etc.git / commitdiff