--- /dev/null
+# Example configuration for ulogd
+# Adapted to Debian by Achilleas Kotsis <achille@debian.gr>
+
+[global]
+######################################################################
+# GLOBAL OPTIONS
+######################################################################
+
+
+# logfile for status messages
+logfile="/var/log/ulogd/ulogd.log"
+
+# loglevel: debug(1), info(3), notice(5), error(7) or fatal(8) (default 5)
+# loglevel=1
+
+######################################################################
+# PLUGIN OPTIONS
+######################################################################
+
+# We have to configure and load all the plugins we want to use
+
+# general rules:
+# 1. load the plugins _first_ from the global section
+# 2. options for each plugin in seperate section below
+
+
+plugin="/usr/lib64/ulogd/ulogd_inppkt_NFLOG.so"
+#plugin="/usr/lib64/ulogd/ulogd_inppkt_ULOG.so"
+#plugin="/usr/lib64/ulogd/ulogd_inppkt_UNIXSOCK.so"
+plugin="/usr/lib64/ulogd/ulogd_inpflow_NFCT.so"
+plugin="/usr/lib64/ulogd/ulogd_filter_IFINDEX.so"
+plugin="/usr/lib64/ulogd/ulogd_filter_IP2STR.so"
+plugin="/usr/lib64/ulogd/ulogd_filter_IP2BIN.so"
+#plugin="/usr/lib64/ulogd/ulogd_filter_IP2HBIN.so"
+plugin="/usr/lib64/ulogd/ulogd_filter_PRINTPKT.so"
+plugin="/usr/lib64/ulogd/ulogd_filter_HWHDR.so"
+plugin="/usr/lib64/ulogd/ulogd_filter_PRINTFLOW.so"
+#plugin="/usr/lib64/ulogd/ulogd_filter_MARK.so"
+plugin="/usr/lib64/ulogd/ulogd_output_LOGEMU.so"
+plugin="/usr/lib64/ulogd/ulogd_output_SYSLOG.so"
+plugin="/usr/lib64/ulogd/ulogd_output_XML.so"
+#plugin="/usr/lib64/ulogd/ulogd_output_SQLITE3.so"
+plugin="/usr/lib64/ulogd/ulogd_output_GPRINT.so"
+#plugin="/usr/lib64/ulogd/ulogd_output_NACCT.so"
+#plugin="/usr/lib64/ulogd/ulogd_output_PCAP.so"
+#plugin="/usr/lib64/ulogd/ulogd_output_PGSQL.so"
+#plugin="/usr/lib64/ulogd/ulogd_output_MYSQL.so"
+#plugin="/usr/lib64/ulogd/ulogd_output_DBI.so"
+plugin="/usr/lib64/ulogd/ulogd_raw2packet_BASE.so"
+plugin="/usr/lib64/ulogd/ulogd_inpflow_NFACCT.so"
+plugin="/usr/lib64/ulogd/ulogd_output_GRAPHITE.so"
+#plugin="/usr/lib64/ulogd/ulogd_output_JSON.so"
+
+# this is a stack for logging packet send by system via LOGEMU
+#stack=log1:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
+
+# this is a stack for packet-based logging via LOGEMU
+#stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
+
+# this is a stack for ULOG packet-based logging via LOGEMU
+#stack=ulog1:ULOG,base1:BASE,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
+
+# this is a stack for packet-based logging via LOGEMU with filtering on MARK
+#stack=log2:NFLOG,mark1:MARK,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,emu1:LOGEMU
+
+# this is a stack for packet-based logging via GPRINT
+#stack=log1:NFLOG,gp1:GPRINT
+
+# this is a stack for flow-based logging via LOGEMU
+#stack=ct1:NFCT,ip2str1:IP2STR,print1:PRINTFLOW,emu1:LOGEMU
+
+# this is a stack for flow-based logging via GPRINT
+#stack=ct1:NFCT,gp1:GPRINT
+
+# this is a stack for flow-based logging via XML
+#stack=ct1:NFCT,xml1:XML
+
+# this is a stack for logging in XML
+#stack=log1:NFLOG,xml1:XML
+
+# this is a stack for accounting-based logging via XML
+#stack=acct1:NFACCT,xml1:XML
+
+# this is a stack for accounting-based logging to a Graphite server
+#stack=acct1:NFACCT,graphite1:GRAPHITE
+
+# this is a stack for NFLOG packet-based logging to PCAP
+#stack=log2:NFLOG,base1:BASE,pcap1:PCAP
+
+# this is a stack for logging packet to MySQL
+#stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2bin1:IP2BIN,mac2str1:HWHDR,mysql1:MYSQL
+
+# this is a stack for logging packet to PGsql after a collect via NFLOG
+#stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,mac2str1:HWHDR,pgsql1:PGSQL
+
+# this is a stack for logging packet to JSON formatted file after a collect via NFLOG
+#stack=log2:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,mac2str1:HWHDR,json1:JSON
+
+# this is a stack for logging packets to syslog after a collect via NFLOG
+#stack=log3:NFLOG,base1:BASE,ifi1:IFINDEX,ip2str1:IP2STR,print1:PRINTPKT,sys1:SYSLOG
+
+# this is a stack for logging packets to syslog after a collect via NuFW
+#stack=nuauth1:UNIXSOCK,base1:BASE,ip2str1:IP2STR,print1:PRINTPKT,sys1:SYSLOG
+
+# this is a stack for flow-based logging to MySQL
+#stack=ct1:NFCT,ip2bin1:IP2BIN,mysql2:MYSQL
+
+# this is a stack for flow-based logging to PGSQL
+#stack=ct1:NFCT,ip2str1:IP2STR,pgsql2:PGSQL
+
+# this is a stack for flow-based logging to PGSQL without local hash
+#stack=ct1:NFCT,ip2str1:IP2STR,pgsql3:PGSQL
+
+# this is a stack for flow-based logging to SQLITE3
+#stack=ct1:NFCT,sqlite3_ct:SQLITE3
+
+# this is a stack for logging packet to SQLITE3
+#stack=log1:NFLOG,sqlite3_pkt:SQLITE3
+
+# this is a stack for flow-based logging in NACCT compatible format
+#stack=ct1:NFCT,ip2str1:IP2STR,nacct1:NACCT
+
+# this is a stack for accounting-based logging via GPRINT
+#stack=acct1:NFACCT,gp1:GPRINT
+
+[ct1]
+#netlink_socket_buffer_size=217088
+#netlink_socket_buffer_maxsize=1085440
+#netlink_resync_timeout=60 # seconds to wait to perform resynchronization
+#pollinterval=10 # use poll-based logging instead of event-driven
+# If pollinterval is not set, NFCT plugin will work in event mode
+# In this case, you can use the following filters on events:
+#accept_src_filter=192.168.1.0/24,1:2::/64 # source ip of connection must belong to these networks
+#accept_dst_filter=192.168.1.0/24 # destination ip of connection must belong to these networks
+#accept_proto_filter=tcp,sctp # layer 4 proto of connections
+
+[ct2]
+#netlink_socket_buffer_size=217088
+#netlink_socket_buffer_maxsize=1085440
+#reliable=1 # enable reliable flow-based logging (may drop packets)
+hash_enable=0
+
+# Logging of system packet through NFLOG
+[log1]
+# netlink multicast group (the same as the iptables --nflog-group param)
+# Group O is used by the kernel to log connection tracking invalid message
+group=0
+#netlink_socket_buffer_size=217088
+#netlink_socket_buffer_maxsize=1085440
+# set number of packet to queue inside kernel
+#netlink_qthreshold=1
+# set the delay before flushing packet in the queue inside kernel (in 10ms)
+#netlink_qtimeout=100
+
+# packet logging through NFLOG for group 1
+[log2]
+# netlink multicast group (the same as the iptables --nflog-group param)
+group=1 # Group has to be different from the one use in log1
+#netlink_socket_buffer_size=217088
+#netlink_socket_buffer_maxsize=1085440
+# If your kernel is older than 2.6.29 and if a NFLOG input plugin with
+# group 0 is not used by any stack, you need to have at least one NFLOG
+# input plugin with bind set to 1. If you don't do that you may not
+# receive any message from the kernel.
+#bind=1
+
+# packet logging through NFLOG for group 2, numeric_label is
+# set to 1
+[log3]
+# netlink multicast group (the same as the iptables --nflog-group param)
+group=2 # Group has to be different from the one use in log1/log2
+numeric_label=1 # you can label the log info based on the packet verdict
+#netlink_socket_buffer_size=217088
+#netlink_socket_buffer_maxsize=1085440
+#bind=1
+
+[ulog1]
+# netlink multicast group (the same as the iptables --ulog-nlgroup param)
+nlgroup=1
+#numeric_label=0 # optional argument
+
+[nuauth1]
+socket_path="/run/nuauth_ulogd2.sock"
+
+[emu1]
+file="/var/log/ulogd/ulogd_syslogemu.log"
+sync=1
+
+[op1]
+file="/var/log/ulogd/ulogd_oprint.log"
+sync=1
+
+[gp1]
+file="/var/log/ulogd/ulogd_gprint.log"
+sync=1
+timestamp=1
+
+[xml1]
+directory="/var/log/ulogd/"
+sync=1
+
+[json1]
+sync=1
+#file="/var/log/ulogd/ulogd.json"
+#timestamp=0
+# device name to be used in JSON message
+#device="My awesome Netfilter firewall"
+# If boolean_label is set to 1 then the numeric_label put on packet
+# by the input plugin is coding the action on packet: if 0, then
+# packet has been blocked and if non null it has been accepted.
+#boolean_label=1
+# Uncomment the following line to use JSON v1 event format that
+# can provide better compatility with some JSON file reader.
+#eventv1=1
+
+[pcap1]
+#default file is /var/log/ulogd/ulogd.pcap
+#file="/var/log/ulogd/ulogd.pcap"
+sync=1
+
+[mysql1]
+db="nulog"
+host="localhost"
+user="nupik"
+table="ulog"
+pass="changeme"
+procedure="INSERT_PACKET_FULL"
+# backlog configuration:
+# set backlog_memcap to the size of memory that will be
+# allocated to store events in memory if data is temporary down
+# and insert them when the database came back.
+#backlog_memcap=1000000
+# number of events to insert at once when backlog is not empty
+#backlog_oneshot_requests=10
+
+[mysql2]
+db="nulog"
+host="localhost"
+user="nupik"
+table="conntrack"
+pass="changeme"
+procedure="INSERT_CT"
+
+[pgsql1]
+db="nulog"
+host="localhost"
+user="nupik"
+table="ulog"
+#schema="public"
+pass="changeme"
+procedure="INSERT_PACKET_FULL"
+# connstring can be used to define PostgreSQL connection string which
+# contains all parameters of the connection. If set, this value has
+# precedence on other variables used to build the connection string.
+# See http://www.postgresql.org/docs/9.2/static/libpq-connect.html#LIBPQ-CONNSTRING
+# for a complete description of options.
+#connstring="host=localhost port=4321 dbname=nulog user=nupik password=changeme"
+#backlog_memcap=1000000
+#backlog_oneshot_requests=10
+# If superior to 1 a thread dedicated to SQL request execution
+# is created. The value stores the number of SQL request to keep
+# in the ring buffer
+#ring_buffer_size=1000
+
+[pgsql2]
+db="nulog"
+host="localhost"
+user="nupik"
+table="ulog2_ct"
+#schema="public"
+pass="changeme"
+procedure="INSERT_CT"
+
+[pgsql3]
+db="nulog"
+host="localhost"
+user="nupik"
+table="ulog2_ct"
+#schema="public"
+pass="changeme"
+procedure="INSERT_OR_REPLACE_CT"
+
+[pgsql4]
+db="nulog"
+host="localhost"
+user="nupik"
+table="nfacct"
+#schema="public"
+pass="changeme"
+procedure="INSERT_NFACCT"
+
+[dbi1]
+db="ulog2"
+dbtype="pgsql"
+host="localhost"
+user="ulog2"
+table="ulog"
+pass="ulog2"
+procedure="INSERT_PACKET_FULL"
+
+[sqlite3_ct]
+table="ulog_ct"
+db="/var/log/ulogd/ulogd.sqlite3db"
+
+[sqlite3_pkt]
+table="ulog_pkt"
+db="/var/log/ulogd/ulogd.sqlite3db"
+
+[sys2]
+facility=LOG_LOCAL2
+
+[nacct1]
+sync = 1
+#file = /var/log/ulogd/ulogd_nacct.log
+
+[mark1]
+mark = 1
+
+[acct1]
+pollinterval = 2
+# If set to 0, we don't reset the counters for each polling (default is 1).
+#zerocounter = 0
+# Set timestamp (default is 0, which means not set). This timestamp can be
+# interpreted by the output plugin.
+#timestamp = 1
+
+[graphite1]
+host="127.0.0.1"
+port="2003"
+# Prefix of data name sent to graphite server
+prefix="netfilter.nfacct"
projects / config / uhu1 / etc.git / commitdiff