*********************************************
-LSI Corp. MegaRAID StorCLI Release
+LSI Corp. MegaRAID StorCLI Release
*********************************************
-Release Date: 05/14/15
+Release Date: 07/13/15
========================
Supported Controllers
MegaRAID SAS 9341-4i
MegaRAID SAS 9380-8e
MegaRAID SAS 9380-4i4e
-MegaRAID SAS 9270-8i
-MegaRAID SAS 9271-4i
-MegaRAID SAS 9271-8i
-MegaRAID SAS 9271-8iCC
+MegaRAID SAS 9270-8i
+MegaRAID SAS 9271-4i
+MegaRAID SAS 9271-8i
+MegaRAID SAS 9271-8iCC
Syncro CS 9271-8i
-MegaRAID SAS 9286-8e
-MegaRAID SAS 9286CV-8e
+MegaRAID SAS 9286-8e
+MegaRAID SAS 9286CV-8e
MegaRAID SAS 9286CV-8eCC
Syncro CS 9286-8e
MegaRAID SAS 9265-8i
Component:
=========
SAS MegaRAID StorCLI
-Release Date: 05/14/15
+Release Date: 07/13/15
Version Numbers: StorCLI
-=============== ===========
-Current Version 1.15.12
+=============== ===========
+Current Version 1.16.06
Previous Versoin 1.15.05
VMware MN-NDS
Solaris x86
FreeBSD
-EFI
+EFI
Ubuntu
Use the StorCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
-SCGCQ00824392 - (Closed) - storclio set factorysettings status failure
-SCGCQ00834137 - (Closed) - Storclif reports failed status on personality mode change
-SCGCQ00846495 - (Resolved) - Not able to create volume with legacy syntax.
-SCGCQ00821520 - (Closed) - Upgrade from PKG 08 to pkg 009: The upgrade failed if not use nosigchk noverchk iMR and MR controllers.
-SCGCQ00826205 - (Closed) - Adding 2 drives (OCE) to to the PR11 by using Storclif failed.
-SCGCQ00831385 - (Resolved) - Creation of StorcliOEL64 and Storclio64 binary as RPM packages
-SCGCQ00844916 - (Implemented) - OEM requesting to do a WRITE VERIFY prior to flushing cache.
-SCGCQ00845603 - (Port_Complete) - Need Special TBolt FW / StorCLI builds to update SBRs on 9271 Tbolt cards in field, depots, and hubs
-SCGCQ00846181 - (Port_Complete) - StorCLI version 1.14.14 does not allow access to both expanders on Colusa
-SCGCQ00846213 - (Port_Complete) - Delete security key from StorCLI fails with invalide message
-SCGCQ00845598 - (Port_Complete) - Utilities and Libraries update to UDK 2010 to support EFI Shell 2.0
-SCGCQ00847952 - (Port_Complete) - storcli exits with legacy syntax for pdfwdownload
-SCGCQ00851337 - (Active) - StorCLI version 1.14.16 is not reporting command success for a storcli64 /c0 show events file=eventLog.txt command
-
-Installation Commands:
+SCGCQ00355536 - (Closed) - MegaCli and StorCli can not manage both Liberator (and prior) and TB controllers in the same system under FreeBSD with the mf
+SCGCQ00357948 - (Closed) - StorCLI does not display drive information behind the Blackjack (Alta) interposer correctly
+SCGCQ00359629 - (Closed) - In paged view the text " Press Enter to continue" should be changed to " Press any key to Continue"
+SCGCQ00359998 - (Closed) - Code clean up in libmods and sysefi files are added
+SCGCQ00360814 - (Closed) - StorCLI: Not able to set pr property includessds as onlymixed on Liberator cacheoffload controller
+SCGCQ00362216 - (Closed) - iMr_Fury_StorCli:4K Drive size shown wrong in Esxi4.1U3
+SCGCQ00362717 - (Closed) - storcli /c0/d0 show " in that legend missing for "Dgrd/pdgd/Onln/ofLn/Rbld"
+SCGCQ00363455 - (Closed) - The legend for the PD List table exceeds 80 char limit.
+SCGCQ00363522 - (Closed) - storcli query for displaying controller properties is showing status , as failure.
+SCGCQ00364248 - (Closed) - StorCLI failed to delete a VD that is just created under Windows 2008
+SCGCQ00364622 - (Closed) - Reports wrong diskgroup size while querying controller level properties
+SCGCQ00364735 - (Closed) - UEFI, the O/P of <storcli /c0 show all>"Current Controller Date/Time" & "Current System Date/time" are not in proper format
+SCGCQ00371445 - (Closed) - Vmware CLI fails to set the phy linkspeed
+SCGCQ00378828 - (Closed) - StorCLI-Legacy:'adpbootdrive get' fails to get bootdrive information.
+SCGCQ00381100 - (Closed) - MR: not able to create PRL11 using 96 drives.
+SCGCQ00408070 - (Closed) - StorCLI does not show both "Current Write Policy" and "Default Write Policy" for VD
+SCGCQ00413789 - (Closed) - storcli crashes on having a non PI drive and trying to create pi vd on all the drive
+SCGCQ00438350 - (Closed) - Megacli crashes after invoking any command in SGI system with one 9280-8e and 2 quad port qlogic FC cards.
+SCGCQ00475583 - (Closed) - Raptor_Galaxy_Tencent:Tencent Storcli detecting the card.
+SCGCQ00479843 - (Closed) - Storcli internal errors should return with 1001, but its coming as -1
+SCGCQ00481474 - (Closed) - Some Numeric values in CLI o/p comes in Hex format
+SCGCQ00484560 - (Closed) - Try to create a Exclusive VD, but after creation it still shows as Shared VD.
+SCGCQ00505771 - (Closed) - Wrong size of CacheCade VD is getting displayed after making one PD offline
+SCGCQ00518543 - (Closed) - PCLI Sparc(1.07.02):" Cli show all" command fails with error msg "Error! App exec failed in FW PCLIError! Internal".
+SCGCQ00568073 - (Closed) - Storclio_1.09.00:Fails to set SubOEMID on Solaris OS .
+SCGCQ00574835 - (Closed) - MR_Inv_6.3_PPC:Storcli- Retreiving LDBBM info through storcli is failing on SLES11 SP2 PPC64
+SCGCQ00579658 - (Closed) - PPC64 :: MR Liberator :: All commands of StorCli is failing with segmentation fault after creating a GlobalHotSpare
+SCGCQ00644123 - (Closed) - "/cx/ex show phyerrorcounters" gives core dump on freeBSD 32 and 64 bit.
+SCGCQ00653742 - (Closed) - Storlib header file checkin and make compatible changes in CLI code.
+SCGCQ00690355 - (Closed) - Storcli shows two controllers in the system though you have only one cotntroller in the system.
+SCGCQ00712982 - (Closed) - Verify StorCLI warns on destructive operations - R0 with 2 x SED drives Deleted with no warning.
+SCGCQ00716584 - (Closed) - /c0 show all page are having some incorrectness in controller information
+SCGCQ00725192 - (Closed) - H330: Firmware Crash is hit while creating the Raid1 vd without drives selected
+SCGCQ00730505 - (Closed) - After Rebuilding, DHS and Expand VD operations failed to update as per VD properties
+SCGCQ00756647 - (Closed) - 6.6_StorCli: StorCli lists all cascaded enclosures at position 0.
+SCGCQ00758770 - (Closed) - FW breaks in iMR when excluding VD's from CC
+SCGCQ00759183 - (Closed) - SED adapterOperation detailed is not shown in detailed show controller properties
+SCGCQ00759187 - (Closed) - Boot Volume details is shown in Megacli but not with storcli.
+SCGCQ00759969 - (Closed) - Adapters are not listed in sorted order.
+SCGCQ00760752 - (Closed) - /c0 show all does not list hwCfg information as compared to MegaCLI.
+SCGCQ00762663 - (Closed) - Storclio : Different error code is coming for 'set pcilinkspeed' in VMware 4.1U3
+SCGCQ00765712 - (Closed) - StorCLI is not updated with the error Message for all new MFI_STAT added in mfistat.h
+SCGCQ00765759 - (Closed) - StorCLI shows wrong "Number of blocks" for a 65.5TB VD size
+SCGCQ00765762 - (Closed) - StorCLI VMware Binary not displaying detailed description for phyerrorcounters of enclosures
+SCGCQ00772243 - (Closed) - StorCLI shows CacheBypass Size and CacheBypass Mode feature enabled against a VD which is associated with a CacheCade VD
+SCGCQ00779789 - (Closed) - Active operation(s) is coming as none when virtual drive erase is in progress.
+SCGCQ00779806 - (Closed) - ASO count mismatch in show ASO w.r.t ASO in storcli show all cmd
+SCGCQ00782882 - (Closed) - MR6.6:StorCLI shows incorrect information about "Cache Vault Flash Size"
+SCGCQ00784808 - (Closed) - "cpybck" help is not coming in Legends
+SCGCQ00792202 - (Closed) - Readability : Output string need to be updated for supportForceTo512e in show all command
+SCGCQ00792232 - (Closed) - MFCdefaults : DisableHII option needs to be include in getShowDefaults()
+SCGCQ00793374 - (Closed) - Comparing an array to null is not useful: "rawSmartData != NULL"
+SCGCQ00794394 - (Closed) - MR_6.7_STROCLI: Command "./storcli64 /c0/ex/sx reset phyerrorcounters" fails in RHEL6.6 PPC64
+SCGCQ00802031 - (Closed) - Deallocation of the same memory more than
+SCGCQ00804554 - (Closed) - emory not freed which can cause leak
+SCGCQ00804588 - (Closed) - Memory leak happening in failure case since not freeing before returning error code.
+SCGCQ00818653 - (Closed) - Copyright value still shows 2014
+SCGCQ00827049 - (Closed) - Storcli cannot create R10 in iMR with 6 or 8 drives per span.
+SCGCQ00827299 - (Closed) - Storcli crashes instead of showing error message on enabling caching on Source VDs and C
+SCGCQ00833223 - (Closed) - Not displaying the timePeriod for event MR_EVT_PD_DEGRADED_MEDIA_POOR_PERFORMANCE
+SCGCQ00833224 - (Closed) - setting vfmap with PF/wrong VF is throwing error
+SCGCQ00839797 - (Closed) - Segmentation Fault observed, when trying to create R1 CCVD using 3/5 drives
+SCGCQ00840948 - (Closed) - Storcli throws syntax error,when setting errorThreshold.
+SCGCQ00853174 - (Closed) - Storcli writes "no CC errors were logged " instead of "no pd events" in a file, when fire a command pdfailevents.
+SCGCQ00360040 - (Closed) - Storcli is returning error with show
+SCGCQ00362070 - (Closed) - iMr_Fury_StorCLi:SectorSize show as "512KB" for 512Bytes drives
+SCGCQ00362421 - (Closed) - StorCLI: Not able to detect Liberator Controller on FreeBSD 9.0(64-bit)
+SCGCQ00364097 - (Closed) - iMR_Inv_6.1:StoreCLI- StoreCLI reports wrong Emulation type for VDs
+SCGCQ00365632 - (Closed) - PCI Info for FreeBSD needs to be indicated as "N/A"
+SCGCQ00372155 - (Closed) - Certain controller features displayed under "show all" exceeds 80-char limit.
+SCGCQ00374735 - (Closed) - StorCLI crashed when run on a Windows 2008 64-bit with 24GB of RAM and 66 drives attached
+SCGCQ00374979 - (Closed) - Storcli ld info command displays R10 vd Span Depth to 1.
+SCGCQ00378135 - (Closed) - portings of AdpRestart command
+SCGCQ00379104 - (Closed) - Not able to get paged view of StorCLI output on VM-Ware Platform
+SCGCQ00396665 - (Closed) - StorcLi_5.7: Remove the description for "Ra=Read Ahead Adaptive" in VD show info.
+SCGCQ00424978 - (Closed) - MR6.1: Hamlin: Is VD Emulated=Yes when emulationType=1
+SCGCQ00442610 - (Closed) - Onfi_patch_6.0:Firmware crashed @Line 244 in ../../raid/1078int.c for entering into CTRL-R with Pinned cache in R60 and R6.
+SCGCQ00442652 - (Closed) - SWR_1.34 - Serial number field is blank in controller information and the same could be updated with N/A in StorCli
+SCGCQ00490620 - (Closed) - Unable to insert a drive after setting a drive as 'Missing' .
+SCGCQ00503981 - (Closed) - Command "./Storcli /call/eall/sx set offline" fails with ERRcode1001 and ERRmsg drive not found.
+SCGCQ00504585 - (Closed) - Some sparc structures missing for storcli.
+SCGCQ00567761 - (Closed) - MR Liberator : PPC SERVERGY Server : MonTask: line 541 in file ../../raid/raidpci.c
+SCGCQ00644545 - (Closed) - storecli reports wrong size on 3000MB VD
+SCGCQ00649324 - (Closed) - MR6.4_StorCLI_240VD: StorCLI crashes on issuing /c1 set cc=conc delay=10 starttime=2014/12/12 12 excludevd=0
+SCGCQ00649962 - (Closed) - Cannot create a VD smaller than 800MB with 4K drives
+SCGCQ00653672 - (Closed) - MR6.4: Storcli show command does not display all the controllers plugged into the server
+SCGCQ00757358 - (Closed) - Add adapterOperation support details in /c0 show all for cachebypassMode.
+SCGCQ00758101 - (Closed) - MR_6.6_Storcli: Storcli reports supercap state 'unknown' while learn is happening on the controller.
+SCGCQ00758924 - (Closed) - Exception with command /co show badblocks or "storcli /cx flasherase"
+SCGCQ00759178 - (Closed) - SupportMaxRate SATA is not listed in PD allowed operations.
+SCGCQ00759181 - (Closed) - Add adapterOperation support details in /c0 show all for Emulationtype.
+SCGCQ00759862 - (Closed) - OEMID is coming as "Unknown" for /c0 show all
+SCGCQ00759959 - (Closed) - Support details are not shown in /c0 show all for discard cache (stalling LD deletion)
+SCGCQ00760385 - (Closed) - MR_6.6: StorCLI showing incorrect value for next Schedule time for consistency check after disabling the CC
+SCGCQ00760398 - (Closed) - MR6.6: Segmentation fault (Core Dumped) in CLI when setting any invalid value for PR start time
+SCGCQ00761937 - (Closed) - MR 6.6 Prealpha2 Storcli:Similar PCI address(BDF number) is displayed for multiple controllers connected to FreeBSD 9.3.
+SCGCQ00764658 - (Closed) - StorCLI /c0 show all command does not reflect the discard vd delete filed
+SCGCQ00765714 - (Closed) - StorCLI shows CacheBypass Size and CacheBypass Mode feature enabled against a CacheCade VD
+SCGCQ00767363 - (Closed) - Showing wrong creation date for Autoconfigured virtual drives
+SCGCQ00771626 - (Closed) - Storcli errors are printing in a different line.
+SCGCQ00772302 - (Closed) - Storcli has option to set PR maxconcurrentpd but show is not present
+SCGCQ00772332 - (Closed) - vpdpage should be read from 4 bytes to get serial number of drive
+SCGCQ00778577 - (Closed) - GB scale to be added while showing CacheCade size in CLI
+SCGCQ00779800 - (Closed) - MR6.6_CLI_FreeBSD: Displaying incorrect Driver name
+SCGCQ00783357 - (Closed) - CTRL-R:2 iMR Card in same System hitting Montask
+SCGCQ00785918 - (Closed) - Reviewing the Code AdataMfi, RmDataMf and VdDataMf files.
+SCGCQ00792200 - (Closed) - supportCPLDUpdate support bit needs to be updated in contoller detailed information
+SCGCQ00793761 - (Closed) - The HDD firmware revision is shown blank for few drives connected.
+SCGCQ00794393 - (Closed) - MR_6.7_STROCLI: "./storcli64 /c0/ex show phyerrorcounters" gives segmentation fault in RHEL6.6 PPC64
+SCGCQ00795335 - (Closed) - Explicit null dereferenced in rmdatamf.cpp causing wrong result
+SCGCQ00796206 - (Closed) - fisResBuffer memory allocation is not considering the failure case
+SCGCQ00803420 - (Closed) - Storcli displays wrong native driver version on ESXi5.5 when quered .
+SCGCQ00804745 - (Closed) - Resource leak - Leak of memory or pointers to system resources
+SCGCQ00805547 - (Closed) - MR_6.7_ Storcli: "Storcli /cx/eall/sall show " gives no enclosure found if two enclosures are connected in multipath scenario
+SCGCQ00806966 - (Resolved) - IDA show incorrect RAID controller type information
+SCGCQ00814939 - (Closed) - MR_6.7: Storcli Command "./storcli /c0/v2 set accesspolicy=RmvBlkd " fails for a blocked source VD.
+SCGCQ00819880 - (Closed) - Gas Gauge Update + StorCLI ResetNow Op
+SCGCQ00837197 - (Closed) - MR_6.8_Storcli: Cachevault flash size shows differently for different commands in storcli under RHEL6.6 PPC64
+SCGCQ00837339 - (Closed) - "/c0/cv show all" shows "CacheVault Flash Size" as 0KB for TB.
+SCGCQ00837342 - (Closed) - New PD_Degraded media events are not logging correctly in PPC
+SCGCQ00840408 - (Closed) - Storcli gives wrong message for '/c1 /eall show phyerrorcounters' on IMR controller with no enclosures
+SCGCQ00357263 - (Closed) - MegaCLI adpgetpciinfo returns a static Bus Number value "17d0"
+SCGCQ00366000 - (Closed) - Storcli displays incomplete serial number for some SSDs
+SCGCQ00377364 - (Closed) - StorCli shows Power Saving Option as enabled, despite IBM Flatwood controller having power saving option completely disabled.
+SCGCQ00383043 - (Closed) - StorCLI-Invader : The "coercion" mode is not in sync with the legacy values.
+SCGCQ00454971 - (Closed) - storcli /c0 show is not listinf SWR controller
+SCGCQ00475562 - (Resolved) Storcli - DFF firmware download fails with config ID mismatch on ESXi5.1
+SCGCQ00475815 - (Closed) - debug prints are present when issuing /co/eall show
+SCGCQ00499067 - (Closed) - Storcli reports VD Type as "Rec1" during reconstruction on SPARC.
+SCGCQ00518579 - (Closed) - Unable to make R10 through Ctrl R using 4k drives
+SCGCQ00529763 - (Closed) - Some characters missing while querying for VD properties with having 64 VD's on a controller.
+SCGCQ00572800 - (Closed) - MR_Inv_6.3_PPC:Storcli-WWN is showing blank for SAS PDs on SLES11 SP2 PPC64
+SCGCQ00581416 - (Closed) - PPC64 :: MR Liberator :: ./storcli64 /c0 show dequeuelog file command failing with segmentation fault
+SCGCQ00601775 - (Closed) - MR : on querying PR status, storcli hits segmentation fault.
+SCGCQ00609942 - (Closed) - storelib header file changes porting
+SCGCQ00645195 - (Closed) - Storcli : unable to set patrol read delay
+SCGCQ00674023 - (Closed) - MR_6.4_StorCli_EFI: Storcli.efi crashes for iMR card.
+SCGCQ00674969 - (Closed) - Storcli doesn't show SN of Samsung SSD 200/400/800 in SWRAID version 1.32
+SCGCQ00695070 - (Closed) - storcli /c0 show all is not displaying "support vd hide" and "support HOQrebuild" feilds and legends are not displayed for HD
+SCGCQ00729691 - (Closed) - MR6.5alpha:Segmentation fault(coredump) observed on executing ./storcli /c1/v63 show all for 64th cachecade VD in ubuntu14.04
+SCGCQ00752000 - (Closed) - In Windows and Linux only controller grouping is working but not sorting
+SCGCQ00755063 - (Closed) - Add support bits for uneven-span and SSHA support
+SCGCQ00759290 - (Closed) - SSM-FLASh drives property is displayed for regular drives.
+SCGCQ00767347 - (Closed) - Patrol read delay is showing wrong value when set to continuous
+SCGCQ00785400 - (Closed) - VD level hide/unhide is not possible through storcli in PPC
+SCGCQ00792264 - (Closed) - Missing the Display of the property temperatureCtrl.
+SCGCQ00794760 - (Closed) - When Supercap SOH is reported bad, CLI still see the Supercap status as "Optimal"
+SCGCQ00799426 - (Closed) - Command /cx/ex show phyerrorcounters gives bus error in Orcale Enterprise Linux
+SCGCQ00804650 - (Closed) - Varailble need to be freed before returning in all failure case
+SCGCQ00809736 - (Closed) - FW hangs during SVD and CCVD migration based on DDR Size
+SCGCQ00830544 - (Closed) - Adpalilog is failing with storcli
+SCGCQ00838307 - (Closed) - Maintainer name being populated while querying for storcli version from OS
+SCGCQ00840372 - (Closed) - Read policy should be 'NORA' for IMR controller instead of 'none'
+SCGCQ00842237 - (Closed) - storcli exits with legacy syntax for pdfwdownload
+SCGCQ00357913 - (Closed) - Update VD emulation feature in StorCLI Libmods module to sync with latest APIs.
+SCGCQ00360745 - (Closed) - StorCLI does not provide command to set HSM or HCOE SCGCQ00358662
+SCGCQ00364332 - (Closed) - iMR_Inv_6.1:StoreCLI-StoreCLI does not give proper message while trying to create 33rd VD on iMR FURY controller
+SCGCQ00365950 - (Closed) - StorCLI cannot displays information for controller in Safe mode
+SCGCQ00374336 - (Closed) - System halts on issuing storcli commands in EFI Environment.
+SCGCQ00384644 - (Closed) - iMR_Inv_6.1:StorCLI- StorCLI does not show 'Unsupported/Blocked' state for 4K drives even though FW is not supporting 4K
+SCGCQ00396303 - (Resolved) - Cfgclr command fails without force option in Sparc OS
+SCGCQ00397663 - (Closed) - StorCli_MR: While creating VD using default values FW allows read policy as"Ra=Read Ahead Adaptive" as against PR-317400
+SCGCQ00465956 - (Closed) - No of blocks displayed for a VD remains same for all VD sizes.
+SCGCQ00467502 - (Closed) - State of the Shielded Drive is not displayed using storcli command
+SCGCQ00569935 - (Closed) - PPC64 :: MR Liberator :: Storcli Version 1.09.01 is showing wrong Creation Date and Time in VD properties
+SCGCQ00574287 - (Closed) - MR_Inv_6.3_PPC:Storcli- Storcli gives 'Segmentation fault' while retriving 'advanced software options' on SLES11 SP2 PPC64
+SCGCQ00627672 - (Closed) - MR6.4_StorCLI: c0 show controller health is failing
+SCGCQ00674131 - (Closed) - StorCLIO_1.09.09 : Not able to set subOEMid in Rhel 5.10 x64 bit.
+SCGCQ00712171 - (Closed) - While creating cachecade vd with one SAS-SSD;Raid 1 option is also enabled
+SCGCQ00787705 - (Closed) - CPLD - userCodeDefinition should be shown as part of /c0 show all command
+SCGCQ00792233 - (Closed) - CPLD UPDATE : cpld upgradableCPLD support bit need to add under hardware configuration
+SCGCQ00796227 - (Closed) - rlListPtr is not handled properly in failure case
+SCGCQ00804680 - (Closed) - Out-of-bounds access and array delete misuse
+SCGCQ00819603 - (Closed) - With command "/c0 start diag" duration should be an optional param.
+SCGCQ00820392 - (Closed) - Segmentation fault while querying for GHSP/DHSP while drive is going in shield-HSP state.
+SCGCQ00827192 - (Closed) - PD fail events are not logging into the file properly in EFI environment
+SCGCQ00830435 - (Closed) - LDViewMirror is giving segmentation fault
+SCGCQ00839321 - (Closed) - Storcli gives wrong error code with respect to FW state while converting JBOD to UG
+SCGCQ00423832 - (Closed) - EFI_ Storcli: Cannot set vpd file on controller, EFI hangs and cannot proceed for further operations until reboot
+SCGCQ00448094 - (Closed) - core dump while issuing storcli command ./storcli /c0/fall show
+SCGCQ00471116 - (Closed) - Pcli: Pcli crashes while try to set securitykey for controller.
+SCGCQ00493491 - (Closed) - Storcli /c0 show ASO fails and delay in displaying
+SCGCQ00521999 - (Closed) - CSET: storelib header file checkin for the latest changes done by storelib - (SCGCQ00521999)
+SCGCQ00523370 - (Closed) - StorCLI reports controller status as 'OK' when Arctrus controller(9361-8i) booted in safe mode
+SCGCQ00792211 - (Closed) - supportDrvActivityLEDSetting supported bit need to be update in Supported adapater Operations
+SCGCQ00793354 - (Closed) - Incorrect sizeof expression in dcmdprm
+SCGCQ00804663 - (Closed) - Variable going out of scope without freeing which causes memory leak
+SCGCQ00813314 - (Closed) - Not able add new VD in Drive Group
+SCGCQ00830269 - (Closed) - storcli /call show all fails with "command invalid"
+SCGCQ00835758 - (Closed) - Storcli shows caching is enabled on Source VD when CCVD is in offline state
+SCGCQ00348911 - (Closed) - Adapter 0: Failed to start SecureErase on Virtual Drive 0 in VMware_ESXi_5.1
+SCGCQ00394883 - (Closed) - StorCli_MR: While Creating RAID1 with four drives command facing the "C0:BAIL_OUT at line 1354" on Flatwood Board
+SCGCQ00436107 - (Closed) - The bootwithpinnedcache logic is backwards, both storcli and the FW are affected
+SCGCQ00518201 - (Closed) - MR6.2 : Storcli shows incorrect "Bus" information when "/c0 show all" is run
+SCGCQ00564008 - (Closed) - StorCli: Segmantation fault appearing in storcli when issuing /c0/fall show
+SCGCQ00622605 - (Closed) - CS2.0: Ctrl-R Domain Id is not showing in controller properties
+SCGCQ00789402 - (Closed) - Remove the code related to enableVCor feild this was used for ASD and now it is not used any more.
+SCGCQ00792205 - (Closed) - supportForceFlash needs to add under suported adapter operations
+SCGCQ00795334 - (Closed) - Operands don't affect result in pddatamf.cpp causing wrong result
+SCGCQ00811117 - (Closed) - LibMod changes for CTLR+R to read Disk Write Cache settings of PD.
+SCGCQ00477037 - (Closed) - CLI reporting Large VD (56TB) size slightly smaller than other apps (by .001)
+SCGCQ00603174 - (Closed) - /c0 set cc=conc command fails with iMR card.
+SCGCQ00795342 - (Closed) - Unchecked return value in rmdatamf.cpp (getControllerStatus)
+SCGCQ00801311 - (Closed) - MR_6.7_Storcli: Storcli reports wrong tmm and scap date of manufacture under scap properties in RHEL6.6 PPC64
+SCGCQ00853185 - (Closed) - Storcli fails to dump lastoneday pdfailevents in a file.
+SCGCQ00792085 - (Closed) - StorCLI :supportDisableImmediateIO adapter properties need to be added under show all command
+SCGCQ00792234 - (Closed) - Firmware error code status MFI_STAT_SECURE_SYSTEM_PD_EXISTS needs to be update in code
+SCGCQ00793361 - (Closed) - Non-array delete for objects in rmdatamf
+SCGCQ00793363 - (Closed) - Resource leak in VdDataMf scanPartitions
+SCGCQ00795336 - (Closed) - Explicit null dereferenced in vddatamf.cpp (getVdDetldInfo)
+SCGCQ00804672 - (Resolved) - Non-array delete for objects: destructors will not be called for objects in the array leading to unexpected beh
+SCGCQ00351234 - (Implemented) - Provide a way to enable or disable 512E using Applicaions
+SCGCQ00632240 - (Implemented) - SED/FDE changes for storcli Synchro
+SCGCQ00685007 - (Closed) - Added the library functions for the new MR API bits and LD operations.
+SCGCQ00685010 - (Closed) - Added the library functions for the new MR API bits and LD operations.
+SCGCQ00696872 - (Closed) - Consistent Sorting of Controllers for End Users in Customer Facing Tools
+SCGCQ00735171 - (Closed) - Implemented the storcli command to print SATA drive's phy error counters and reset them.
+SCGCQ00818101 - (Implemented) - Add set "Fail PD on SMARTer" property feature to StorCLI
+SCGCQ00829204 - (Implemented) - LibMods: Increase maximum cache size for Cachecade to 2048GB. This will be named CC 2.5
+SCGCQ00525321 - (Closed) - Implemented the diag results to print on console
+SCGCQ00564477 - (Implemented) - Display the NCQ enabled/disabled status of every SATA disk drive in the output of StorCLI and MegaCLI
+SCGCQ00642230 - (Closed) - Allow VMWARE version of STORCLI cannot be run from any directory
+SCGCQ00726019 - (Implemented) - Add set "Fail PD on SMARTer" property feature to StorCLI
+SCGCQ00755527 - (Closed) - Enable SED on JBOD
+SCGCQ00350668 - (Implemented) - Create Spanned R0 array (00) in StorCLI
+SCGCQ00369742 - (Implemented) - MWCLI. R10, R50, R60, R00 VD creation
+SCGCQ00558815 - (Closed) - MR 4.12: Big endian architecture support for MR Linux driver and StorCli
+SCGCQ00787923 - (Implemented) - OEL Support for SPARC
+SCGCQ00352120 - (Implemented) - MWCLI. Add HA support into storcli
+SCGCQ00564474 - (Implemented) - Request RAID CLI to display the Patrol Read Start Time
+SCGCQ00621287 - (Closed) - STORCLI will support MR controller management without UEFI BootServiceDriver Driver and also has retain functionality of existing see- adapter-through-driver functionality.
+SCGCQ00750164 - (Closed) - RRB 71 - enable SED support for iMR JBOB
+SCGCQ00757473 - (Closed) - LD Deletion stalling all IOs on 12.12.0-0178
+SCGCQ00818987 - (Closed) - LimMod changes related to CtrlH & MSM Mismatch on write-back options - UI Inconsistancy issue
+SCGCQ00828476 - (Closed) - Storcli Should display SAS Address N/A if its invalid and change Host interface type names from PCIX, PCIE to PCI-X, PCI-E
+SCGCQ00333209 - (Closed) - Implemented 128 drive support by using the new ENCL_INFO structures
+SCGCQ00349548 - (Closed) - Uneven span support is added in StorCLI.
+SCGCQ00349599 - (Implemented) - Refer attached design doc
+SCGCQ00433703 - (Implemented) - Megacli/storcli support for lmrc driver
+SCGCQ00467863 - (Implemented) - ASD- StorCLI - Libmod changes to support PD caching.
+SCGCQ00632051 - (Closed) - Added the OEM-NEC check for getting default disk-cache policy in Libmods as Disable.
+SCGCQ00827663 - (Closed) - Implemented the VD-VF mapping related commands in factory tool
+SCGCQ00827665 - (Closed) - Implemented the VD-VF mapping related commands in factory tool
+SCGCQ00381093 - (Implemented) - PR SCGCQ00319011: Rebuild time res
+SCGCQ00665081 - (Closed) - If any error that is returned as negative we return it s 0xFF from CLI to shell else FW returned error status will be returned to shell.
+SCGCQ00693042 - (Implemented) - Complete 240VD support for utilities
+SCGCQ00794841 - (Closed) - Functionality to extract field value from new API changes
+SCGCQ00795150 - (Opened) - UDK Support for EFI
+SCGCQ00816344 - (Implemented) - Utilities/Applications should not assume that expanders are enclosures as this is not always the case.
+SCGCQ00817977 - (Closed) - Monitoring Drive performance and predictive failure
+SCGCQ00817980 - (Closed) - Storcli: Monitoring Drive performance and predictive failure
+SCGCQ00342399 - (Implemented) - CSET: (Tbolt PR 211180) Punctured Block Logging Improvements
+SCGCQ00381311 - (Implemented) - dcmd path chagnes for supporting the new cachevault a
+
+Installation Commands:
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.
Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information. The User Guide can be found in the MegaRAID Documentation section of www.lsi.com.
=======================
Previous Releases
=======================
-
-
-
-Component:
-=========
SAS MegaRAID StorCLI
Release Date: 04/16/15
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.15.05
Previous Versoin 1.14.12
VMware MN-NDS
Solaris x86
FreeBSD
-EFI
+EFI
Ubuntu
Use the StorCLI components from the folder that matches your OS.
SCGCQ00490620 - (Closed) - Unable to insert a drive after setting a drive as 'Missing' .
SCGCQ00360040 - (Closed) - Storcli is returning error with show
SCGCQ00362070 - (Closed) - iMr_Fury_StorCLi:SectorSize show as "512KB" for 512Bytes drives
-SCGCQ00362421 - (Closed) - StorCLI: Not able to detect Liberator Controller on FreeBSD 9.0(64-bit?
+SCGCQ00362421 - (Closed) - StorCLI: Not able to detect Liberator Controller on FreeBSD 9.0(64-bit
SCGCQ00364097 - (Closed) - iMR_Inv_6.1:StoreCLI- StoreCLI reports wrong Emulation type for VDs
SCGCQ00365632 - (Closed) - PCI Info for FreeBSD needs to be indicated as "N/A"
SCGCQ00372155 - (Closed) - Certain controller features displayed under "show all" exceeds 80-char limit.
SCGCQ00674023 - (Closed) - MR_6.4_StorCli_EFI: Storcli.efi crashes for iMR card.
SCGCQ00645195 - (Closed) - Storcli : unable to set patrol read delay
SCGCQ00609942 - (Closed) - storelib header file changes porting
-SCGCQ00601775 - (Closed) - MR : on querying PR status, storcli hits segmentation fault?
+SCGCQ00601775 - (Closed) - MR : on querying PR status, storcli hits segmentation fault
SCGCQ00581416 - (Closed) - PPC64 :: MR Liberator :: ./storcli64 /c0 show dequeuelog file command failing with segmentation fault
SCGCQ00572800 - (Closed) - MR_Inv_6.3_PPC:Storcli-WWN is showing blank for SAS PDs on SLES11 SP2 PPC64
SCGCQ00529763 - (Closed) - Some characters missing while querying for VD properties with having 64 VD's on a controller.
SCGCQ00436107 - (Closed) - The bootwithpinnedcache logic is backwards, both storcli and the FW are affected
SCGCQ00793689 - (Closed) - Reading Supercap VPD information fails on RHEL 6.6 PPC64
SCGCQ00603174 - (Closed) - /c0 set cc=conc command fails with iMR card.
-SCGCQ00477037 - (Closed) - CLI reporting Large VD (56TB) size slightly smaller than other apps
+SCGCQ00477037 - (Closed) - CLI reporting Large VD (56TB) size slightly smaller than other apps
SCGCQ00796453 - (Implemented) - MR 6.7 - If execute delete CCVD force, StorCLI throws error code 0x3 MFI_STAT message but FW throws a proper message
SCGCQ00781004 - (Implemented) - Write-back caching support for non-RAID disks
SCGCQ00780967 - (Implemented) - Mechanism to set disk write cache on non-RAID disks - to enable / disable
SCGCQ00350668 - (Implemented) - Create Spanned R0 array (00) in StorCLI
SCGCQ00369742 - (Implemented) - MWCLI. R10, R50, R60, R00 VD creation
SCGCQ00762265 - (Implemented) - Online Capacity Expansion by adding spans to RAID 10.
-SCGCQ00757473 - (Closed) - LD Deletion stalling all IOs on Niwot HBA 12.12.0-0178
+SCGCQ00757473 - (Closed) - LD Deletion stalling all IOs on 12.12.0-0178
SCGCQ00750164 - (Closed) - RRB 71 - enable SED support for iMR JBOD
SCGCQ00621287 - (Closed) - STORCLI will support MR controller management without UEFI BootServiceDriver Driver and also has retain functionality of existing see- adapter-through-driver functionality.
SCGCQ00564474 - (Implemented) - Request RAID CLI to display the Patrol Read Start Time
SCGCQ00350668 - (Implemented) - Create Spanned R0 array (00) in StorCLI
SCGCQ00369742 - (Implemented) - MWCLI. R10, R50, R60, R00 VD creation
SCGCQ00762265 - (Implemented) - Online Capacity Expansion by adding spans to RAID 10.
-SCGCQ00757473 - (Closed) - LD Deletion stalling all IOs on Niwot HBA 12.12.0-0178
+SCGCQ00757473 - (Closed) - LD Deletion stalling all IOs on 12.12.0-0178
SCGCQ00750164 - (Closed) - RRB 71 - enable SED support for iMR JBOD
SCGCQ00621287 - (Closed) - STORCLI will support MR controller management without UEFI BootServiceDriver Driver and also has retain functionality of existing see- adapter-through-driver functionality.
SCGCQ00564474 - (Implemented) - Request RAID CLI to display the Patrol Read Start Time
SCGCQ00790077 - (Port_Complete) - "./storcli64 /c0 flasherase " fails in RHEL 6.6 PPC64
-Installation Commands:
+Installation Commands:
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.
Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information. The User Guide can be found in the MegaRAID Documentation section of www.lsi.com.
+
+
SAS MegaRAID StorCLI
Release Date: 01/14/15
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.14.12
Previous Versoin 1.13.06
VMware MN-NDS
Solaris x86
FreeBSD
-EFI
+EFI
Ubuntu
Use the StorCLI components from the folder that matches your OS.
SCGCQ00758079 (DFCT) - MR 6.6 Prealpha:Incorrect Storcli version is displayed for MR 6.6 FreeBSD binary.
SCGCQ00758739 (DFCT) - StorCLI while executing SED command the syntax fails with unsupported token
SCGCQ00758756 (DFCT) - Imporper detailed help command discription for set security JBOD command
-SCGCQ00757497 (ENHREQ) - LD Deletion stalling all IOs on Niwot HBA 12.12.0-0178
+SCGCQ00757497 (ENHREQ) - LD Deletion stalling all IOs on 12.12.0-0178
SCGCQ00725192 (DFCT) - H330: Firmware Crash is hit while creating the Raid1 vd without drives selected
SCGCQ00730505 (DFCT) - After Rebuilding, DHS and Expand VD operations failed to update as per VD properties
SCGCQ00752000 (DFCT) - In Windows and Linux only controller grouping is working but not sorting
SCGCQ00797068 (DFCT) - SATA SSD Model string is truncated to 8 bytes in StorCLI /cx/sx/ex show all Device Attributes section
SCGCQ00797277 (DFCT) - SuperCap Capacitance from same system is showed inconsistent in -adpbbucmd and /cv show
SCGCQ00797726 (DFCT) - EFI Storcli is not show the PD information on Grantley server
+
-
-Installation Commands:
+Installation Commands:
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.
Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information. The User Guide can be found in the MegaRAID Documentation section of www.lsi.com.
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.13.06
Previous Versoin 1.12.13
VMware MN-NDS
Solaris x86
FreeBSD
-EFI
+EFI
Ubuntu
Use the StorCLI components from the folder that matches your OS.
SCGCQ00720007 - (Closed) - Caching is not getting enabled on all SVD's at a time using StorCLI command
SCGCQ00735327 - (Closed) - using option 2 for join mirror performs the same operation as option 0
SCGCQ00686189 - (Closed) - Advance Software options is not displaying any value for MegaRAID CacheCade Pro2.0
-SCGCQ00705593 - (Closed) - Command "show autopdcache ?" is not working correctly
+SCGCQ00705593 - (Closed) - Command "show autopdcache " is not working correctly
SCGCQ00720446 - (Closed) - Show learn is not coming in Help File
SCGCQ00740182 - (Closed) - Showing incorrect VDs number after excluding the VDs from cc
SCGCQ00635336 - (Closed) - storcli /c0 set backplane mode=val if we give value 256 its taking as 0 and giving command as success.
SCGCQ00716639 - (Closed) - Storcli TMM and SCAP info shows wrong numbers
SCGCQ00606760 - (Closed) - "set perfmode" accepting wrong inputs
SCGCQ00642227 - (Closed) - Implement Head of Queue drive rebuild for MegaRAID controllers
-SCGCQ00656613 - (Closed) - Add ability to take a VD offline, bring back VD online
+SCGCQ00656613 - (Closed) - Add ability to take a VD offline, bring back VD online
SCGCQ00684957 - (Closed) - Need StorCLI-O for EFI
SCGCQ00707449 - (Implemented) - SSHA Licensing (PFK)
SCGCQ00709946 - (Active) - For iBBU battery typeiBBU09 the Next Learn time value is not correct in the output of storCLI command storcli64 /c0/bbu show
SCGCQ00691901 - (Port_Complete) - Not able to enable security on DG which are eligible for secured Drive Group
-Installation Commands:
+Installation Commands:
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.
Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information. The User Guide can be found in the MegaRAID Documentation section of www.lsi.com.
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.12.13
Previous Versoin 1.09.13
VMware MN
Solaris x86
FreeBSD
-EFI
+EFI
Ubuntu
Use the StorCLI components from the folder that matches your OS.
SCGCQ00691917 - (Closed) - on querying for backplane/controller PHY, errors get reported
SCGCQ00645141 - (Closed) - Storcli reports VD state as offline if pinned cache is generated through CC VD removal
SCGCQ00646223 - (Closed) - adding mirror by setting src value to 0 will start rebuild on online drive
-SCGCQ00649337 - (Closed) - Junk characters seen in storcli.efi –adpallinfo –a0 and storcli.efi /c0 show all
+SCGCQ00649337 - (Closed) - Junk characters seen in storcli.efi \96adpallinfo \96a0 and storcli.efi /c0 show all
SCGCQ00695247 - (Closed) - on querying the PHY info for the drive,storcli gives the junk data
SCGCQ00666644 - (Closed) - using option 2 i.e ./storcli /c0/d0 add mirror src=2 give success but no operation is performed
SCGCQ00694027 - (Closed) - on querying the phy error counter for controller, storcli dosent fail the cmd
SCGCQ00670863 - (Port_Complete) - Source VD association failed and Storcli application crashed while associating sourceVD to CCVD
-Installation Commands:
+Installation Commands:
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.
Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information. The User Guide can be found in the MegaRAID Documentation section of www.lsi.com.
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.09.13
Previous Versoin 1.09.08
VMware MN
Solaris x86
FreeBSD
-EFI
+EFI
Ubuntu
Use the StorCLI components from the folder that matches your OS.
SCGCQ00659836 - (Port_Complete) - StorCli Displays Incorrect Information for BatteryWarning versus MagaCli
-Installation Commands:
+Installation Commands:
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.
Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information. The User Guide can be found in the MegaRAID Documentation section of www.lsi.com.
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.09.08
Previous Versoin 1.07.07
VMware MN
Solaris x86
FreeBSD
-EFI
+EFI
Ubuntu
Use the StorCLI components from the folder that matches your OS.
SCGCQ00593568 - (Active) - Storcli doesnot prompt the user to reboot the host after changing the link speed of a TFF.
-Installation Commands:
+Installation Commands:
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.
Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information. The User Guide can be found in the MegaRAID Documentation section of www.lsi.com.
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.07.07
Previous Versoin 1.05.07
VMware MN
Solaris x86
FreeBSD
-EFI
+EFI
Ubuntu
Use the StorCLI components from the folder that matches your OS.
SCGCQ00501414 - (Closed) - Online firmware update is not triggered on flashing FW
SCGCQ00524047 - (Closed) - Segmentation fault occures while converting binary to text file of DQlogs
SCGCQ00526385 - (Closed) - Unable to create cachecade VD with WT property .
-SCGCQ00522666 - (Closed) - Command "cli /sall show all"
+SCGCQ00522666 - (Closed) - Command "cli /sall show all"
SCGCQ00524755 - (Closed) - Storcli- Gives incomplete message while clearing config when CC VD is present on the controller
SCGCQ00493544 - (Closed) - "Error! App exec failed in FW PCLIError! Internal" is displayed on executing "Cli /eall/sall spindown" command with 25 drives.
SCGCQ00501437 - (Closed) - StorCLI - MR 6.2 StorCLI help syntax is wrong
SCGCQ00469390 - (Port_Complete) - MR_Inv_6.1:StoreCLI- StorCLI reports retention time as 0 for supercap FBU02 and FBU03
-Installation Commands:
+Installation Commands:
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.
Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information. The User Guide can be found in the MegaRAID Documentation section of www.lsi.com.
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.05.07
Previous Versoin 1.04.07
VMware MN
Solaris x86
FreeBSD
-EFI
+EFI
Ubuntu
Use the StorCLI components from the folder that matches your OS.
SCGCQ00394952 - (Closed) - Segmentation fault hitting while executing the command "/c0 set bgi h "
SCGCQ00398246 - (Closed) - VD create syntax display improper output.
SCGCQ00398992 - (Closed) - Command displayed in the same line after "Press any key to continue".
-SCGCQ00402499 - (Closed) - Storecli /c0 show eventloginfo
+SCGCQ00402499 - (Closed) - Storecli /c0 show eventloginfo
SCGCQ00403335 - (Closed) - Mismatch of "Start Copyback " command in global help file and particular help file of copyback .
SCGCQ00436538 - (Closed) - pd version is not listing all if PDs are missing
SCGCQ00442610 - (Closed) - Onfi_patch_6.0:Firmware crashed @Line 244 in ../../raid/1078int.c for entering into CTRL-R with Pinned cache in R60 and R6.
SCGCQ00447972 - (Closed) - Storcli : adpgetprop command for enableeug/enableeghsp showing success and not getting reflected when we give wrong flag
-SCGCQ00451393 - (Closed) - Megascu adpm0flash command hangs for Dell controllers.
+SCGCQ00451393 - (Closed) - Megascu adpm0flash command hangs
SCGCQ00462885 - (Closed) - Need to remove storcli /cx show clusterenable and storcli /cx set clusterenable=<value> since FW did not support this in HA
SCGCQ00364097 - (Resolved) - iMR_Inv_6.1:StoreCLI- StoreCLI reports wrong Emulation type for VDs
SCGCQ00375625 - (Closed) - StorCLI : Displaying failure in the output for querying Dimmer switch information
SCGCQ00425263 - (Active) - storcli /c0 show all : did not have HA information+request to add additional info
-Installation Commands:
+Installation Commands:
=======================
Refer to the User's Guide included in the package.
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.04.07
Previous Versoin 1.03.11
VMware MN
Solaris
FreeBSD
-EFI
+EFI
Ubuntu
Use the StorCLI components from the folder that matches your OS.
SCGCQ00379169 - (Implemented) - Remove support for flashing firmware on PDs behind interposer
SCGCQ00375839 - (Active) - StorCLI: The legend for "phy Error Counters" exceeds the 80-char limit.
-Installation Commands:
+Installation Commands:
=======================
Refer to the User's Guide included in the package.
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.03.11
Previous Versoin 1.02.08
VMware MN
Solaris
FreeBSD
-EFI
+EFI
Use the StorCLI components from the folder that matches your OS.
SCGCQ00359141 - (Completed) - Fixing Linux Release 1.03.01
-Installation Commands:
+Installation Commands:
=======================
Refer to the User's Guide included in the package.
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.02.08 (Phase 3)
Previous Version 1.01.10 (Phase 2)
Enhancements and Bug Fixes
==========================
-There were few updates in command syntaxes.
+There were few updates in command syntaxes.
- See revision history in Rev E : available in Page 2 of user guide(StorCLI_Phase3_RefMan_.pdf)
- See revision history in appendix D: available in Page 76 of user guide(StorCLI_Phase3_RefMan_.pdf)
SCGCQ00295690 MWCLI. Solaris x86 support
SCGCQ00341481 StorCLI - after migration the last pd is getting displayed twice( when migrating from 4pd raid 5 to 6 pd r0 )
SCGCQ00341581 Set path to new library as "export LD_LIBRARY_PATH=/usr/local/lib" after installing libgcc-3.4.6-sol10-x86-local.pkg
SCGCQ00341585 fails to log the latest set of events to the file.
-SCGCQ00341991 StorCLI_EFI: Displaying "?" symbol under progress bar when PD Initialization is in progress
+SCGCQ00341991 StorCLI_EFI: Displaying "" symbol under progress bar when PD Initialization is in progress
SCGCQ00342017 StorCLI: After a controller FW flash from StorCLI, No pending Images are seen before a reboot as seen in the legacy builds.
SCGCQ00342072 FreeBSD - Adapter cache Flush is not working .
SCGCQ00342077 storecli_EFI.storecli.efi /c0/pall set linkspeed=val It is not displaying PHY info field .
SCGCQ00341595 StorCLI - Spelling mismatch "Alta" specified which should either be "SATA" or "ATA"
SCGCQ00342071 storcli help command with "Legacy" and "page" option doesnt display the paged help.
SCGCQ00342978 StorCli-"Phy linkspeed show all help" in description spelling mistake is their.
-SCGCQ00343142 StorCli-"eccbucketleakrate" , the value should be greater than ‘0’ and less than ‘65535’. Help is misleading.
+SCGCQ00343142 StorCli-"eccbucketleakrate" , the value should be greater than \910\92 and less than \9165535\92. Help is misleading.
SCGCQ00344136 Description for option [expandarray] in command storcli /cx/v(x|all) expand Size=<xx> is not clear
SCGCQ00344150 StorCLI - partial help ( Descripton ) for command "storcli /cx /bbu show properties h " is not there
SCGCQ00344171 StorCli-"Smartpollinterval"value need to be mention in the Description.
SCGCQ00359980 Code cleanup in Univ_viva_cli
SCGCQ00340241 StorCLI - " insert " command is not working
SCGCQ00338560 StorCLI : Driver version is not displayed correctly
-SCGCQ00339757 StorCLI_EFI : Progress field for drive erase operation is displaying "?' symbol if drive erase is in progress.
+SCGCQ00339757 StorCLI_EFI : Progress field for drive erase operation is displaying "' symbol if drive erase is in progress.
SCGCQ00342762 StorCli-"Driver Version" field is missing (Free BSD 7.3)
SCGCQ00343005 StorCLI: Stripe Size of the VD is shown incorrect after a PD missing operation is performed on the disk group.
SCGCQ00346251 storcli does not report ROC temperature in '/cX show all' in HW section
SCGCQ00348474 .\storCLI64.exe /c1 add vd type=r1 drives=47:1,2 ----> command is giving syntax error if using "comma" for vd creation.
SCGCQ00350579 StorCLI: The VD name cannot contain spaces as allowed in MSM.
SCGCQ00358917 EFI Shell StorCLI: Rebuild starts and does not make any progress in EFI env
-SCGCQ00375019 “StorCli64.exe /xd/wdall show” command reports that NytroXD license is absent even when the license is available
+SCGCQ00375019 \93StorCli64.exe /xd/wdall show\94 command reports that NytroXD license is absent even when the license is available
SCGCQ00318433 Porting of Vogel 1.0 PRs to storcli phase 2.5
SCGCQ00341607 Failing to display Driver Version in FreeBSd
SCGCQ00343664 Storcli-"Enclosure Slot No is mis matching "(DE1600-SAS )
==================
STORCLI PHASE 2.0 Specific Limitations:
1. User can use both 'raid0' and 'r0' for mentioning the raid level. And user can find both the forms in the help command.
-2. When passing parameter,'set' for CC mode is mandatory.
-3. The use of comma in between array no and row parameter in the syntax for making ‘pdreplacemissing’ should not be used.
-4. User would not be able to specify ROWs while creating ‘Dedicated Hot Spare’. Instead user needs to use ‘Drive Group ID’ as dgs=N
-5. In ‘Foreign Configuration show’, utility will display VD as ‘Foreign’ instead of showing the VD state.
+2. When passing parameter,'set' for CC mode is mandatory.
+3. The use of comma in between array no and row parameter in the syntax for making \91pdreplacemissing\92 should not be used.
+4. User would not be able to specify ROWs while creating \91Dedicated Hot Spare\92. Instead user needs to use \91Drive Group ID\92 as dgs=N
+5. In \91Foreign Configuration show\92, utility will display VD as \91Foreign\92 instead of showing the VD state.
6. The success code and description is printed only after complete processing of the command. Success will not be printed unless the entire log is displayed to the output. Hence the success code and description is printed at the end of the log for this particular command.
-7. Any command syntax is still valid, if user uses “-” instead of “/” for e.g. storcli.exe /c0-vall show.
-8. Show ‘Bus and PCI Slot type’ are not shown as part of the controller information.
-9. While creating a VD using non-Enc-ID Devices, user needs to provide inputs in the format ‘D:SlotID’ as syntax (for eg: Drives=D:1,2,3 where 1,2,3 are the slot ids of the non encID devices)
-10. Tape Drives will be listed only with /c0/sall show all command, /c0/sall show doesn’t list Tape drive but only display the direct attached drives if present or a blank table if none are connected.
+7. Any command syntax is still valid, if user uses \93-\94 instead of \93/\94 for e.g. storcli.exe /c0-vall show.
+8. Show \91Bus and PCI Slot type\92 are not shown as part of the controller information.
+9. While creating a VD using non-Enc-ID Devices, user needs to provide inputs in the format \91D:SlotID\92 as syntax (for eg: Drives=D:1,2,3 where 1,2,3 are the slot ids of the non encID devices)
+10. Tape Drives will be listed only with /c0/sall show all command, /c0/sall show doesn\92t list Tape drive but only display the direct attached drives if present or a blank table if none are connected.
11. Importing Foreign Configuration while Rebuild is in progress then query for Show fall the output would display multiple R60 VDs.
-12. Date and Time of controller is not displayed in proper format in EFI Environment
+12. Date and Time of controller is not displayed in proper format in EFI Environment
13. JSON is not required in EFI
-14. The sector size of the drives are displayed in “KB” instead of bytes under the PD List table. This is just display error in tabular format but it is displayed correctly in drive details.
-15. The “Eid:slot” column while importing a foreign config is not populated. StorCLI: The VD name cannot contain spaces as allowed in MSM.
+14. The sector size of the drives are displayed in \93KB\94 instead of bytes under the PD List table. This is just display error in tabular format but it is displayed correctly in drive details.
+15. The \93Eid:slot\94 column while importing a foreign config is not populated. StorCLI: The VD name cannot contain spaces as allowed in MSM.
16. Consistency Check cannot be scheduled beyond year-2037AD.
17. Flashing 9260CV low-level controller firmware is supported only through DOS version of CLI (MegaCLI) and not through EFI version of StorCLI. Flashing MegaRAID firmware does not have this issue.
Known Behavior:
-1. ‘All VD initialization’ command when run through StorCLI utility, shows the error message as failed for cachecaded VD. This is a generic limitation.
+1. \91All VD initialization\92 command when run through StorCLI utility, shows the error message as failed for cachecaded VD. This is a generic limitation.
2. While reconstruction is in progress, start of CC/Init/BGI operations on same VD throws an inappropriate error message. This is a generic limitation.
3. In controller show cc the field CC current state will change only when it meets the schedule CC parameters.
-4. All the unsupported commands for SWR controller if tried to execute may result in unknown behavior for example – system hang-up. For the list of unsupported commands refer to user guide Appendix C: Unsupported Commands in Embedded RAID.
-5. Output for controller information contains junk characters in VMware ESXi 4.1 update2.
+4. All the unsupported commands for SWR controller if tried to execute may result in unknown behavior for example \96 system hang-up. For the list of unsupported commands refer to user guide Appendix C: Unsupported Commands in Embedded RAID.
+5. Output for controller information contains junk characters in VMware ESXi 4.1 update2.
6. FDE drives are displayed as secured drives on SWR- SCU controller.
-7. There is no check to see whether user has entered different properties or the same property multiple times in StorCLI command. Hence StorCLI does not throw syntax error for the command “/c0/dall show all all all”. This issue is because of the implementation of accepting multiple properties in a single command line in some cases.
+7. There is no check to see whether user has entered different properties or the same property multiple times in StorCLI command. Hence StorCLI does not throw syntax error for the command \93/c0/dall show all all all\94. This issue is because of the implementation of accepting multiple properties in a single command line in some cases.
-Installation Commands:
+Installation Commands:
=======================
Refer to the User's Guide included in the package.
Version Numbers: StorCLI
-=============== ===========
+=============== ===========
Current Version 1.01.10
Important Notes:
==================
-1. User can use both ‘raid0’ and ‘r0’ for mentioning the raid level. And user can find both the forms in the help command.
-2. When passing parameter ‘set' for CC mode is mandatory.
-3. The use of comma in between array no and row parameter in the syntax for making ‘pdreplacemissing’ should not be used.
-4. User would not be able to specify ROWs while creating ‘Dedicated Hot Spare’. Instead user needs to use ‘Drive Group ID’ as dgs=N
-5. In ‘Foreign Configuration show’, utility will display VD as ‘Foreign’ instead of showing the VD state.
+1. User can use both \91raid0\92 and \91r0\92 for mentioning the raid level. And user can find both the forms in the help command.
+2. When passing parameter \91set' for CC mode is mandatory.
+3. The use of comma in between array no and row parameter in the syntax for making \91pdreplacemissing\92 should not be used.
+4. User would not be able to specify ROWs while creating \91Dedicated Hot Spare\92. Instead user needs to use \91Drive Group ID\92 as dgs=N
+5. In \91Foreign Configuration show\92, utility will display VD as \91Foreign\92 instead of showing the VD state.
6. The success code and description is printed only after complete processing of the command. Success will not be printed unless the entire log is displayed to the output. The success code and description is printed at the end of the log for this particular command.
-7. Any command syntax is still valid, if user uses “-” instead of “/” (e.g. storcli.exe /c0-vall show.)
-8. Show ‘Bus and PCI Slot type’ are not shown as part of the controller information.
-9. While creating a VD using non-Enc-ID Devices, user needs to provide inputs in the format ‘D:SlotID’ as syntax (e.g. Drives=D:1,2,3 where 1,2,3 are the slot ids of the non encID devices.)
-10. Tape Drives will be listed only with /c0/sall show all command. /c0/sall show doesn’t list Tape drive but only displays the direct attached drives if present or a blank table if none are connected.
+7. Any command syntax is still valid, if user uses \93-\94 instead of \93/\94 (e.g. storcli.exe /c0-vall show.)
+8. Show \91Bus and PCI Slot type\92 are not shown as part of the controller information.
+9. While creating a VD using non-Enc-ID Devices, user needs to provide inputs in the format \91D:SlotID\92 as syntax (e.g. Drives=D:1,2,3 where 1,2,3 are the slot ids of the non encID devices.)
+10. Tape Drives will be listed only with /c0/sall show all command. /c0/sall show doesn\92t list Tape drive but only displays the direct attached drives if present or a blank table if none are connected.
11. Importing Foreign Configuration while Rebuild is in progress then query for Show fall the output would display multiple R60 VDs.
-12. For any operation (Migrate/Init/BGI/CC) percentile completed in minutes is not displayed in StorCLI output.
-13. ‘All VD initialization’ command when run through StorCLI utility, shows the error message as failed for cachecaded VD.
+12. For any operation (Migrate/Init/BGI/CC) percentile completed in minutes is not displayed in StorCLI output.
+13. \91All VD initialization\92 command when run through StorCLI utility, shows the error message as failed for cachecaded VD.
14. While reconstruction is in progress, start of CC/Init/BGI operations on same VD throws an inappropriate error message.
15. In controller show cc the field CC current state will change only when it meets the schedule CC parameters.
-16. All the unsupported commands for SWR controller if tried to execute may result in unknown behavior for example – system hang-up. For the list of unsupported commands refer to user guide Appendix C: Unsupported Commands in Embedded RAID.
-17. Output for controller information contains junk characters in VMware ESXi 4.1 update2.
+16. All the unsupported commands for SWR controller if tried to execute may result in unknown behavior for example \96 system hang-up. For the list of unsupported commands refer to user guide Appendix C: Unsupported Commands in Embedded RAID.
+17. Output for controller information contains junk characters in VMware ESXi 4.1 update2.
18. FDE drives are displayed as secured drives on SWR- SCU controller.
-Installation Commands:
+Installation Commands:
=======================
Refer to the User's Guide included in the package.
projects / my-stuff / storcli.git / commitdiff