--- /dev/null
+.keep*
+*-
--- /dev/null
+This is the global configuration file for t1lib.
+Note that it is not of any use if not setup by the system administrator.
+
+For information on how to set up these things see the t1lib-manual.
+
+ENCODING=.
+AFM=.
+TYPE1=.
--- /dev/null
+machine_id=
+default_voice_port=9987
+voice_ip=0.0.0.0
+licensepath=/opt/teamspeak3-server/
+filetransfer_port=30033
+filetransfer_ip=0.0.0.0
+query_port=10011
+query_ip=0.0.0.0
+dbplugin=ts3db_sqlite3
+dbpluginparameter=
+dbsqlpath=/opt/teamspeak3-server/sql/
+dbsqlcreatepath=create_sqlite/
+logpath=/var/log/teamspeak3-server/
+logquerycommands=0
--- /dev/null
+vt220
\ No newline at end of file
--- /dev/null
+% config.ps - configuration file for dvips.
+% Tomas Rokicki, Thomas Esser, Karl Berry, et al., 1986ff, public domain.
+
+% Memory available. Download the three-line PostScript file:
+% %! Hey, we're PostScript
+% /Times-Roman findfont 30 scalefont setfont 144 432 moveto
+% vmstatus exch sub 40 string cvs show pop showpage
+% to determine this number. (It will be the only thing printed.)
+m 3500000
+
+% Run securely. z2 disables both shell command execution in
+% `\special' and config files (via the `E' option) and opening of any
+% absolute filenames. z1, the default, forbids shell escapes but
+% allows absolute filenames. z0 allows both. The corresponding
+% command line options are -R0|-R1|-R2
+z1
+
+% How to print, maybe with lp instead lpr, etc. If commented-out, output
+% will go into a file by default.
+%o |lpr
+
+% Default resolution of this device, in dots per inch.
+D 600
+X 600
+Y 600
+
+% Metafont mode. (This is completely different from the -M
+% command-line option, which controls whether mktexpk is invoked.)
+% See ../../metafont/misc/modes.mf for a list of mode names. This mode
+% and the D number above must agree, or mktexpk will get confused.
+M ljfour
+
+% Last resort bitmap sizes.
+R 300 600
+
+% Correct printer offset. You can use testpage.tex from the LaTeX
+% distribution to find these numbers.
+O 0pt,0pt
+
+% Bitmap font compression. Results in more compact output files, but
+% sometimes causes trouble. So the default is disabled. Set Z1 to enable
+% this feature.
+Z0
+
+% Partially download Type 1 fonts by default. Only reason not to do
+% this is if you encounter bugs. (Please report them to
+% @email{tex-k@tug.org} if you do.)
+j
+
+% This shows how to add your own map file.
+% Remove the comment and adjust the name:
+% p +myfonts.map
+
+% If we have setpagedevice, use that.
+% else if we have the a4 resp. letter operator, use that.
+% else do nothing to set the page size.
+%
+% In the past, the a4size and letterSize definitions did not set the
+% page size, but we want to set it if we can so that ps2pdf can work
+% properly. Here, a4 and a4size, and letter and letterSize, are
+% identical, and we prefer the a4/letter names -- texconfig uses them.
+
+% 0 0 595 842 is the right bounding box that applications expect
+% for A4. Since dvips always rounds up, choose something slightly
+% smaller for our paper size.
+
+@ a4 210mm 297mm
+@+ ! %%DocumentPaperSizes: a4
+@+ %%BeginPaperSize: a4
+@+ /setpagedevice where
+@+ { pop << /PageSize [595 842] >> setpagedevice }
+@+ { /a4 where { pop a4 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ letter 8.5in 11in
+@+ ! %%DocumentPaperSizes: Letter
+@+ %%BeginPaperSize: Letter
+@+ /setpagedevice where
+@+ { pop << /PageSize [612 792] >> setpagedevice }
+@+ { /letter where { pop letter } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ a4size 210mm 297mm
+@+ ! %%DocumentPaperSizes: a4
+@+ %%BeginPaperSize: a4
+@+ /setpagedevice where
+@+ { pop << /PageSize [595 842] >> setpagedevice }
+@+ { /a4 where { pop a4 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ letterSize 8.5in 11in
+@+ ! %%DocumentPaperSizes: Letter
+@+ %%BeginPaperSize: Letter
+@+ /setpagedevice where
+@+ { pop << /PageSize [612 792] >> setpagedevice }
+@+ { /letter where { pop letter } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+% The jacow paper size is the smaller of letter and a4 in both
+% dimensions, and can therefore hopefully be printed on either paper
+% size. As far as we know, Volker Schaa first used it for the JACOW
+% conference proceedings that he produced.
+@ jacow 210mm 11in
+@+ ! %%DocumentPaperSizes: jacow
+@+ %%BeginPaperSize: jacow
+@+ /setpagedevice where
+@+ { pop << /PageSize [595 792] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+% The smallbook paper size has been used by the Free Software Foundation
+% to print manuals for many years, and is part of Texinfo.
+@ smallbook 7in 9.25in
+@+ ! %%DocumentPaperSizes: smallbook
+@+ %%BeginPaperSize: smallbook
+@+ /setpagedevice where
+@+ { pop << /PageSize [504 666] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ halfexecutive 133mm 184mm
+@+ ! %%DocumentPaperSizes: halfexecutive
+@+ %%BeginPaperSize: halfexecutive
+@+ /setpagedevice where
+@+ { pop << /PageSize [378 522] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ halfletter 140mm 216mm
+@+ ! %%DocumentPaperSizes: halfletter
+@+ %%BeginPaperSize: halfletter
+@+ /setpagedevice where
+@+ { pop << /PageSize [396 612] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ statement 140mm 216mm
+@+ ! %%DocumentPaperSizes: statement
+@+ %%BeginPaperSize: statement
+@+ /setpagedevice where
+@+ { pop << /PageSize [396 612] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ executive 184mm 267mm
+@+ ! %%DocumentPaperSizes: executive
+@+ %%BeginPaperSize: executive
+@+ /setpagedevice where
+@+ { pop << /PageSize [522 756] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+% for powerdot
+@ screen 8.25in 11in
+@+ ! %%DocumentPaperSizes: Screen
+@+ %%BeginPaperSize: Screen
+@+ /setpagedevice where
+@+ { pop << /PageSize [594 792] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+% a common size for printers (in north america).
+@ sixbynine 6in 9in
+@+ ! %%DocumentPaperSizes: SixByNine
+@+ %%BeginPaperSize: SixByNine
+@+ /setpagedevice where
+@+ { pop << /PageSize [432 648] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ quarto 215mm 275mm
+@+ ! %%DocumentPaperSizes: quarto
+@+ %%BeginPaperSize: quarto
+@+ /setpagedevice where
+@+ { pop << /PageSize [610 780] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ note 216mm 279mm
+@+ ! %%DocumentPaperSizes: note
+@+ %%BeginPaperSize: note
+@+ /setpagedevice where
+@+ { pop << /PageSize [612 792] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ folio 216mm 330mm
+@+ ! %%DocumentPaperSizes: folio
+@+ %%BeginPaperSize: folio
+@+ /setpagedevice where
+@+ { pop << /PageSize [612 936] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ legal 8.5in 14in
+@+ ! %%DocumentPaperSizes: Legal
+@+ %%BeginPaperSize: Legal
+@+ /setpagedevice where
+@+ { pop << /PageSize [612 1008] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ 10x14 10in 14in
+@+ ! %%DocumentPaperSizes: 10x14
+@+ %%BeginPaperSize: 10x14
+@+ /setpagedevice where
+@+ { pop << /PageSize [720 1008] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ ledger 17in 11in
+@+ ! %%DocumentPaperSizes: Ledger
+@+ %%BeginPaperSize: Ledger
+@+ /setpagedevice where
+@+ { pop << /PageSize [1224 792] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ tabloid 11in 17in
+@+ ! %%DocumentPaperSizes: Tabloid
+@+ %%BeginPaperSize: Tabloid
+@+ /setpagedevice where
+@+ { pop << /PageSize [792 1224] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ 11x17 11in 17in
+@+ ! %%DocumentPaperSizes: 11x17
+@+ %%BeginPaperSize: 11x17
+@+ /setpagedevice where
+@+ { pop << /PageSize [792 1224] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ a0 841mm 1189mm
+@+ ! %%DocumentPaperSizes: a0
+@+ %%BeginPaperSize: a0
+@+ /setpagedevice where
+@+ { pop << /PageSize [2384 3370] >> setpagedevice }
+@+ { /a0 where { pop a0 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ a1 594mm 841mm
+@+ ! %%DocumentPaperSizes: a1
+@+ %%BeginPaperSize: a1
+@+ /setpagedevice where
+@+ { pop << /PageSize [1684 2384] >> setpagedevice }
+@+ { /a1 where { pop a1 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ a2 420mm 594mm
+@+ ! %%DocumentPaperSizes: a2
+@+ %%BeginPaperSize: a2
+@+ /setpagedevice where
+@+ { pop << /PageSize [1191 1684] >> setpagedevice }
+@+ { /a2 where { pop a2 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ a3 297mm 420mm
+@+ ! %%DocumentPaperSizes: a3
+@+ %%BeginPaperSize: a3
+@+ /setpagedevice where
+@+ { pop << /PageSize [842 1191] >> setpagedevice }
+@+ { /a3 where { pop a3 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ a5 148mm 210mm
+@+ ! %%DocumentPaperSizes: a5
+@+ %%BeginPaperSize: a5
+@+ /setpagedevice where
+@+ { pop << /PageSize [420 595] >> setpagedevice }
+@+ { /a5 where { pop a5 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ a6 105mm 148mm
+@+ ! %%DocumentPaperSizes: a6
+@+ %%BeginPaperSize: a6
+@+ /setpagedevice where
+@+ { pop << /PageSize [298 420] >> setpagedevice }
+@+ { /a6 where { pop a6 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ a7 74mm 105mm
+@+ ! %%DocumentPaperSizes: a7
+@+ %%BeginPaperSize: a7
+@+ /setpagedevice where
+@+ { pop << /PageSize [210 298] >> setpagedevice }
+@+ { /a7 where { pop a7 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ a8 52mm 74mm
+@+ ! %%DocumentPaperSizes: a8
+@+ %%BeginPaperSize: a8
+@+ /setpagedevice where
+@+ { pop << /PageSize [147 210] >> setpagedevice }
+@+ { /a8 where { pop a8 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ a9 37mm 52mm
+@+ ! %%DocumentPaperSizes: a9
+@+ %%BeginPaperSize: a9
+@+ /setpagedevice where
+@+ { pop << /PageSize [105 147] >> setpagedevice }
+@+ { /a9 where { pop a9 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ a10 26mm 37mm
+@+ ! %%DocumentPaperSizes: a10
+@+ %%BeginPaperSize: a10
+@+ /setpagedevice where
+@+ { pop << /PageSize [74 105] >> setpagedevice }
+@+ { /a10 where { pop a10 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ jisb0 1030mm 1456mm
+@+ ! %%DocumentPaperSizes: jisb0
+@+ %%BeginPaperSize: jisb0
+@+ /setpagedevice where
+@+ { pop << /PageSize [2920 4127] >> setpagedevice }
+@+ { /jisb0 where { pop jisb0 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ jisb1 728mm 1030mm
+@+ ! %%DocumentPaperSizes: jisb1
+@+ %%BeginPaperSize: jisb1
+@+ /setpagedevice where
+@+ { pop << /PageSize [2064 2920] >> setpagedevice }
+@+ { /jisb1 where { pop jisb1 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ jisb2 515mm 728mm
+@+ ! %%DocumentPaperSizes: jisb2
+@+ %%BeginPaperSize: jisb2
+@+ /setpagedevice where
+@+ { pop << /PageSize [1460 2064] >> setpagedevice }
+@+ { /jisb2 where { pop jisb2 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ jisb3 364mm 515mm
+@+ ! %%DocumentPaperSizes: jisb3
+@+ %%BeginPaperSize: jisb3
+@+ /setpagedevice where
+@+ { pop << /PageSize [1032 1460] >> setpagedevice }
+@+ { /jisb3 where { pop jisb3 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ jisb4 257mm 364mm
+@+ ! %%DocumentPaperSizes: jisb4
+@+ %%BeginPaperSize: jisb4
+@+ /setpagedevice where
+@+ { pop << /PageSize [729 1032] >> setpagedevice }
+@+ { /jisb4 where { pop jisb4 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ jisb5 182mm 257mm
+@+ ! %%DocumentPaperSizes: jisb5
+@+ %%BeginPaperSize: jisb5
+@+ /setpagedevice where
+@+ { pop << /PageSize [516 729] >> setpagedevice }
+@+ { /jisb5 where { pop jisb5 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ jisb6 128mm 182mm
+@+ ! %%DocumentPaperSizes: jisb6
+@+ %%BeginPaperSize: jisb6
+@+ /setpagedevice where
+@+ { pop << /PageSize [363 516] >> setpagedevice }
+@+ { /jisb6 where { pop jisb6 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ jisb7 91mm 128mm
+@+ ! %%DocumentPaperSizes: jisb7
+@+ %%BeginPaperSize: jisb7
+@+ /setpagedevice where
+@+ { pop << /PageSize [258 363] >> setpagedevice }
+@+ { /jisb7 where { pop jisb7 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ jisb8 64mm 91mm
+@+ ! %%DocumentPaperSizes: jisb8
+@+ %%BeginPaperSize: jisb8
+@+ /setpagedevice where
+@+ { pop << /PageSize [181 258] >> setpagedevice }
+@+ { /jisb8 where { pop jisb8 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ b0 1000mm 1414mm
+@+ ! %%DocumentPaperSizes: b0
+@+ %%BeginPaperSize: b0
+@+ /setpagedevice where
+@+ { pop << /PageSize [2835 4008] >> setpagedevice }
+@+ { /b0 where { pop b0 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ b1 707mm 1000mm
+@+ ! %%DocumentPaperSizes: b1
+@+ %%BeginPaperSize: b1
+@+ /setpagedevice where
+@+ { pop << /PageSize [2004 2835] >> setpagedevice }
+@+ { /b1 where { pop b1 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ b2 500mm 707mm
+@+ ! %%DocumentPaperSizes: b2
+@+ %%BeginPaperSize: b2
+@+ /setpagedevice where
+@+ { pop << /PageSize [1417 2004] >> setpagedevice }
+@+ { /b2 where { pop b2 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ b3 353mm 500mm
+@+ ! %%DocumentPaperSizes: b3
+@+ %%BeginPaperSize: b3
+@+ /setpagedevice where
+@+ { pop << /PageSize [1001 1417] >> setpagedevice }
+@+ { /b3 where { pop b3 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ b4 250mm 353mm
+@+ ! %%DocumentPaperSizes: b4
+@+ %%BeginPaperSize: b4
+@+ /setpagedevice where
+@+ { pop << /PageSize [709 1001] >> setpagedevice }
+@+ { /b4 where { pop b4 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ b5 176mm 250mm
+@+ ! %%DocumentPaperSizes: b5
+@+ %%BeginPaperSize: b5
+@+ /setpagedevice where
+@+ { pop << /PageSize [499 709] >> setpagedevice }
+@+ { /b5 where { pop b5 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ b6 125mm 176mm
+@+ ! %%DocumentPaperSizes: b6
+@+ %%BeginPaperSize: b6
+@+ /setpagedevice where
+@+ { pop << /PageSize [354 499] >> setpagedevice }
+@+ { /b6 where { pop b6 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ c5 162mm 229mm
+@+ ! %%DocumentPaperSizes: c5
+@+ %%BeginPaperSize: c5
+@+ /setpagedevice where
+@+ { pop << /PageSize [459 649] >> setpagedevice }
+@+ { /c5 where { pop c5 } if }
+@+ ifelse
+@+ %%EndPaperSize
+
+@ DL 110mm 220mm
+@+ ! %%DocumentPaperSizes: DL
+@+ %%BeginPaperSize: DL
+@+ /setpagedevice where
+@+ { pop << /PageSize [312 624] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ Comm10 105mm 241mm
+@+ ! %%DocumentPaperSizes: Comm10
+@+ %%BeginPaperSize: Comm10
+@+ /setpagedevice where
+@+ { pop << /PageSize [297 684] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ Monarch 98.4mm 190.5mm
+@+ ! %%DocumentPaperSizes: Monarch
+@+ %%BeginPaperSize: Monarch
+@+ /setpagedevice where
+@+ { pop << /PageSize [279 540] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ archE 36in 48in
+@+ ! %%DocumentPaperSizes: archE
+@+ %%BeginPaperSize: archE
+@+ /setpagedevice where
+@+ { pop << /PageSize [2592 3456] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ archD 24in 36in
+@+ ! %%DocumentPaperSizes: archD
+@+ %%BeginPaperSize: archD
+@+ /setpagedevice where
+@+ { pop << /PageSize [1728 2592] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ archC 18in 24in
+@+ ! %%DocumentPaperSizes: archC
+@+ %%BeginPaperSize: archC
+@+ /setpagedevice where
+@+ { pop << /PageSize [1296 1728] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ archB 12in 18in
+@+ ! %%DocumentPaperSizes: archB
+@+ %%BeginPaperSize: archB
+@+ /setpagedevice where
+@+ { pop << /PageSize [864 1296] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ archA 9in 12in
+@+ ! %%DocumentPaperSizes: archA
+@+ %%BeginPaperSize: archA
+@+ /setpagedevice where
+@+ { pop << /PageSize [648 864] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ flsa 216mm 330.2mm
+@+ ! %%DocumentPaperSizes: flsa
+@+ %%BeginPaperSize: flsa
+@+ /setpagedevice where
+@+ { pop << /PageSize [612 936] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ flse 216mm 330.2mm
+@+ ! %%DocumentPaperSizes: flse
+@+ %%BeginPaperSize: flse
+@+ /setpagedevice where
+@+ { pop << /PageSize [612 936] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ csheet 431.8mm 558.8mm
+@+ ! %%DocumentPaperSizes: csheet
+@+ %%BeginPaperSize: csheet
+@+ /setpagedevice where
+@+ { pop << /PageSize [1224 1584] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ dsheet 558.8mm 863.6mm
+@+ ! %%DocumentPaperSizes: dsheet
+@+ %%BeginPaperSize: dsheet
+@+ /setpagedevice where
+@+ { pop << /PageSize [1584 2448] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ esheet 863.6mm 1117.6mm
+@+ ! %%DocumentPaperSizes: esheet
+@+ %%BeginPaperSize: esheet
+@+ /setpagedevice where
+@+ { pop << /PageSize [2448 3168] >> setpagedevice }
+@+ if
+@+ %%EndPaperSize
+
+@ unknown 0in 0in
+@+ statusdict /setpageparams known { hsize vsize 0 1 statusdict begin {
+@+ setpageparams } stopped end } { true } ifelse { statusdict /setpage known
+@+ { hsize vsize 1 statusdict begin { setpage } stopped pop end } if } if
--- /dev/null
+# Generated for texlive-basic by texlive-module.eclass
+dviluatex luatex language.def,language.dat.lua dviluatex.ini
+luatex luatex language.def,language.dat.lua luatex.ini
+mf mf-nowin - -translate-file=cp227.tcx mf.ini
+etex pdftex language.def -translate-file=cp227.tcx *etex.ini
+pdfetex pdftex language.def -translate-file=cp227.tcx *pdfetex.ini
+pdftex pdftex language.def -translate-file=cp227.tcx *pdfetex.ini
+tex tex - tex.ini
--- /dev/null
+# Generated for texlive-latex by texlive-module.eclass
+dvilualatex luatex language.dat,language.dat.lua dvilualatex.ini
+latex pdftex language.dat -translate-file=cp227.tcx *latex.ini
+lualatex luatex language.dat,language.dat.lua lualatex.ini
+pdflatex pdftex language.dat -translate-file=cp227.tcx *pdflatex.ini
+mptopdf pdftex - -translate-file=cp227.tcx mptopdf.tex
--- /dev/null
+% ls-R -- filename database for kpathsea; do not change this line.
+./:
+.:
+dvipdfm
+dvips
+dvips.d
+fmtutil.d
+language.dat.d
+language.dat.lua.d
+language.def.d
+ls-R
+texdoc.d
+texmf.d
+updmap.d
+web2c
+
+./dvipdfm:
+config
+
+./dvipdfm/config:
+
+./dvips:
+config
+
+./dvips/config:
+config.ps
+
+./dvips.d:
+
+./fmtutil.d:
+format.texlive-basic.cnf
+format.texlive-latex.cnf
+
+./language.dat.d:
+.keep_app-text_texlive-core-0
+
+./language.dat.lua.d:
+.keep_app-text_texlive-core-0
+
+./language.def.d:
+.keep_app-text_texlive-core-0
+
+
+./texdoc.d:
+texdoc.cnf
+
+./texmf.d:
+00header.cnf
+05searchpaths.cnf
+10standardpaths.cnf
+15options.cnf
+20sizes.cnf
+
+./updmap.d:
+.keep_app-text_texlive-core-0
+00updmap.cfg
+texlive-basic.cfg
+texlive-fontsrecommended.cfg
+texlive-latex.cfg
+
+./web2c:
+.keep_app-text_texlive-core-0
+fmtutil.cnf
+texmf.cnf
+updmap.cfg
--- /dev/null
+# texdoc.cnf
+#
+# DO NOT edit this file!
+#
+# For your personal or local setting, if you are a normal user, run 'texdoc -f'
+# and use the file indicated by a star. You may need to create it. DO NOT copy
+# the present file, please create a new one (you may want to copy/paste/edit
+# portions of the present file however, or just read it for inspiration).
+#
+# For system-wide configuration or other uses, you may want to use the other
+# files listed, see the manual (texdoc texdoc) for details. The files are read
+# in the order they are printed. If a value is set multiple times, first wins.
+#
+# In those files, you can set your preferred viewer for various formats,
+# some nice names (alias) for specific documentation, and your preferred default
+# values of texdoc's configuration settings.
+#
+# Everything after a # on a line is ignored.
+# Spaces at the beginning/end of a line, as well as empty lines, are ignored.
+#
+# For more details, see the texdoc manual (try `texdoc texdoc').
+
+### Viewer settings ###
+
+# Defaults depend on what is available on you system, as well as you desktop
+# environment. Here are a few examples.
+#
+# %s is optional and stands for the filename.
+#
+# viewer_pdf = xpdf # works
+# viewer_pdf = xpdf %s & # works even better
+
+# If you want to enable support for zipped documentation (see below),
+# you may want to adapt viewer_* so that it starts a subshell:
+#
+# viewer_pdf = (xpdf %s) &
+#
+# Otherwise, the & will have no effect since the viewing command is followed by
+# some cleanup-commands for temporary files. For the same reason, %s must be the
+# last thing on your command line: (xpdf %s -option) will not work.
+#
+# WARNING: for zip support your viewer needs to be blocking, i.e. it must not
+# return immediately: otherwise the temporary file will be deleted too early.
+
+### Zipped documentation support ###
+
+# WARNING: support for zipped documents works only on Unix. Make sure that the
+# values of the associated options are adapted to your system. Read the above
+# warning concerning viewers.
+
+# Built-in defaults (for reference):
+#
+# zipext_list = # (empty list)
+# rm_file = rm -f
+# rm_dir = rmdir
+#
+# For each "ext" in zipext_list, you must define a "unzip_ext" unzipper.
+# The unzipped data must be printed on stdout. Example:
+#
+# zipext_list = gz
+# unzip_gz = gzip -d -c
+
+### Other settings ###
+
+# Built-in defaults (for reference):
+#
+# mode = view
+#
+# interact_switch = true
+# machine_switch = false
+#
+# verbosity_level = 2 # Print: 0 nothing, 1 errors, 2 warnings, 3: infos
+# debug_list = # the empty list
+#
+# ext_list = pdf, html, txt, ps, dvi, # Note: empty string at end
+# badext_list = txt, # Note: empty string at end
+# basename_list = readme
+# badbasename_list = readme
+
+## Known suffixes for documentation
+suffix_list = doc, -doc, _doc, .doc, /doc, manual, /manual, -manual, userguide, /user_guide, -guide, -user, -man, notes
+
+### Score ###
+
+# Only results with positive scores are displayed (unless mode is 'showall').
+# Results with score <= -100 are never displayed.
+#
+# You can adjust the score of results containing a pattern with adjscore,
+# either globally or only for specific keywords
+
+# Makefile's are never documentation, just as documents in src or source subdir
+# -1000 should be enough to kill them
+adjscore /Makefile = -1000
+adjscore /src/ = -1000
+adjscore /source/ = -1000
+
+# licence files aren't very likely to contain relevant documentation, but it
+# feels wrong to totally kill them...
+adjscore copying = -10
+adjscore license = -10
+adjscore gpl = -10
+
+# tex-virtual-academy provides a lot of fake matches
+adjscore /tex-virtual-academy-pl/ = -50
+
+# test and example files are not likely the best documentation
+adjscore test = -3
+adjscore example = -3
+adjscore sample = -3
+
+# readme's usually deserve a negative score because they have a bad extension,
+# but they're still slightly better than other results with negative scores...
+adjscore readme = 0.1
+
+# Uncomment this to make the man pages have a greater priority
+#adjscore .man1. = 5
+#adjscore .man5. = 5
+
+# 'texdoc' may look like "tex's documentation" but it isn't...
+adjscore(tex) texdoc = -10
+adjscore(tex) tex-gyre = -10
+adjscore(tex) tex-ps = -10
+
+# avoid too many results to be shown for 'latex'
+# package names
+adjscore(latex) guide-to-latex = -10 # only usefull with the book
+adjscore(latex) latex-web-companion = -10
+adjscore(latex) tufte-latex = -10
+adjscore(latex) cweb-latex = -10
+adjscore(latex) duerer-latex = -10
+adjscore(latex) cjw-latex = -10
+adjscore(latex) ocr-latex = -10
+# file names
+adjscore(latex) Content_LaTeX_Package_Demo = -10
+adjscore(latex) example_latex = -10
+adjscore(latex) test_latex = -10
+
+# beamer
+adjscore(beamer) beamer-tut-pt = -10
+adjscore(beamer) beamer-tut-pt/tutorialbeamer = +10
+adjscore(beamer) presentations = -10
+adjscore(beamer) beamer-FUBerlin = -3
+
+# context
+adjscore(context) circuitikz = -10
+
+# it is also possible to set the score directly in alias directives
+# eg, fontinstallationguide is related to fontinst:
+alias(0.1) fontinst = fontinstallationguide
+
+### Aliases ###
+
+## Essential documentation
+
+alias live = texlive-en
+alias texlive = texlive-en
+alias latex = latex-doc-ptr
+
+## various stuff
+
+# a few useful general documents
+alias faq-en = newfaq
+alias faq = newfaq
+adjscore(symbols) /staves/ = -5
+
+# various lshort translations
+adjscore(lshort) /lshort-english/ = +3 # original
+alias lshort-de = l2kurz # german
+alias lshort-pl = lshort-polish/lshort2e # polish
+alias lshort-pt = ptlshort # portuguese
+alias lshort-sk = slshorte # slovak
+alias lshort-es = lshort-spanish/lshort # spanish
+
+# *TeX engines reference manuals, man pages and related
+alias e-tex-ref = etex_man
+alias etex-ref = etex_man
+alias pdftex-ref = pdftex-a
+alias luatex-ref = luatexref-t
+alias etex-man = etex.man1
+alias pdftex-man = pdftex.man1
+#alias xetex-man = xetex.man1 # should exist...
+alias luatex-man = luatex.man1
+alias luatex-pkg = oberdiek/luatex.pdf
+
+# by default, <engine> = <engine>-ref (duplicated: no alias cascading)
+alias e-tex = etex_man
+alias etex = etex_man
+alias xetex = XeTeX-reference
+alias luatex = luatexref-t
+
+# latex/basic classes
+alias article = classes
+alias report = classes
+alias book = classes
+#alias ltxguide = ???
+#alias minimal = ???
+adjscore(minimal) europecv = -1000 # false positive
+
+# latex/basic packages, grouped by dtx
+alias bezier = latex209
+alias fleqn = latex209
+alias leqno = latex209
+alias openbib = latex209
+alias t1enc = latex209
+alias fix-cm = fixltx2e
+alias flafter = source2e
+alias tracefnt = source2e
+alias fontenc = source2e
+alias textcomp = source2e
+alias(20) fontenc = encguide
+alias(20) textcomp = encguide
+alias makeidx = makeindx
+alias showidx = makeindx
+alias letter = base/letter
+alias slides = base/slides
+alias shortvrb = base/doc
+alias doc = base/doc
+# TODO: try to avoid the huge amount of false positives for `doc' itself.
+
+# latex's required graphics bundle
+alias graphics = grfguide
+alias graphicx = grfguide
+alias color = grfguide
+alias epsfig = grfguide
+
+# latex's required psnfss2e bundle
+alias mathpazo = psnfss2e
+alias mathptmx = psnfss2e
+alias helvet = psnfss2e
+alias avant = psnfss2e
+alias courier = psnfss2e
+alias chancery = psnfss2e
+alias bookman = psnfss2e
+alias newcent = psnfss2e
+alias charter = psnfss2e
+alias times = psnfss2e
+alias palatino = psnfss2e
+alias mathptm = psnfss2e
+alias mathpple = psnfss2e
+alias utopia = psnfss2e
+
+# ams
+alias amsmath = amsldoc
+alias amsthm = amsthdoc
+alias amsfonts = amsfndoc
+alias amsrefs = amsrdoc
+alias amslatex2 = technote
+#
+alias amsmath-dev = amsmath
+alias amscls-dev = amsclass
+alias amsart-dev = amsclass
+alias amsproc-dev = amsclass
+alias amsbook-dev = amsclass
+
+# koma-script
+alias koma-script = scrguien
+alias koma = scrguien
+alias scrartcl = scrguien
+alias scrreprt = scrguien
+alias scrbook = scrguien
+alias typearea = scrguien
+alias koma-script-de = scrguide
+alias koma-de = scrguide
+alias scrartcl-de = scrguide
+alias scrreprt-de = scrguide
+alias scrbook-de = scrguide
+alias typearea-de = scrguide
+
+# tugboat package and classes
+alias tugboat = ltubguid
+
+# caption
+alias caption = caption-eng
+alias caption-dev = caption.pdf
+
+# misc
+alias hyperref = hyperref/manual.pdf
+alias hyperref-dev = hyperref.pdf
+alias bibtex = btxdoc
+alias metapost = mpman
+alias(5) metapost = mpintro
+alias(5) metapost = mpgraph
+alias iso = isoman
+alias pstricks = pstricks-doc
+alias xstring-fr = xstring_doc_fr
+alias isomath = isomath.sty.pdf
+alias elsarticle = elsdoc
+alias afoot = arabtex-doc
+alias vntex = vntex # umbrella document (manual comes first due to catalogue)
+alias asymptote = asymptote # not mentioned in the catalogue currently
+alias nonfloat = nonfloat-en
+alias nonfloat-de = nonfloat
+alias subdocs = bezos
+alias dotlessi = bezos
+alias checkend = bezos
+alias arabicfont = bezos
+alias cm-super = cm-super/README
+alias cmsuper = cm-super/README
+alias(5) cmsuper = cm-super/FAQ
+alias cyrillic = cyrillic/00readme.txt
+
+## a few easy patterns
+
+# egrep 'manual\.pdf\>'
+alias t-angles = t-manual
+alias tree-dvips = tree-manual
+
+# egrep 'user\.pdf\>'
+alias cweb-latex = cweb-user
+
+# egrep 'doc\.pdf\>'
+alias barcode = eandoc.pdf
+alias enctex-cz = encdoc
+alias jurabib-de = jbgerdoc
+alias ofs = ofsdoc-e
+alias ofs-cz = ofsdoc
+alias pst-geo = pst-map3d-doc
+alias german = gerdoc
+alias ngerman = gerdoc
+alias pst-eucl = pst-eucl/euclide_english
+alias pst-eucl-fr = pst-eucl/euclide
+
+## aliases basically borrowed from texdoctk.dat with some adaptations
+
+alias texguide = usrguide
+alias lehman = fontinstallationguide
+alias uktugfaq = newfaq
+alias datenumber-de = datenumber/docgerman
+alias index = ind
+alias psnfss = psnfss2e
+alias euro = eurosamp
+alias lmfonts = lm-info
+alias dutch = rapdoc
+alias montex = mlsquick
+alias(60) akademia = tex-virtual-academy-pl/index.html
+alias otibet = otibet/unidoc
+alias startex = startex/base/guide
+alias apmgraph = pmgraph
+alias tikz = pgfmanual
+alias treetex = tree_doc
+alias(5) xypic = xyrefer
+alias pbdiagram = pb-manual
+alias expressg = expeg
+alias arydshln = arydshln-man
+alias natbib2 = natnotes
+alias tangles = t-angles/t-manual
+alias mathenv = mdwtab
+alias gnlogic = gn-logic14
+alias labels(1) = envlab/elguide
+alias lineno = ulineno
+alias akletter = akletter/lettereng
+alias mltex = mltex/mltex.txt
+alias flcards = flashcards
+alias tex4ht = tex4ht/mn.html
+alias ppower4 = ppower4/report
+alias latex3 = ltx3info
+alias musictex = musicdoc
+alias kluwer = kluwer/usrman
+alias cv = curve/curve
+alias preprint = preprint/00readme.txt
+alias onrannual = onrannual/README
+
+## packages from ctan/macros/latex/contrib/misc or with doc in .sty only
+
+# the score used is 4.1 because:
+# - it is less than 4.5, the default score of foobar/foobar.pdf for name foobar
+# - it is greater than the worse false positive here (.../VERSION for version)
+#
+# Anyway, this is a hopefully a temporary measure, since work is going on to
+# produce suitable documentation for all these packages (thanks to Philipp
+# Stephani and Robin Fairbairns mostly).
+
+alias(4.1) 3parttable = 3parttable.sty
+alias(4.1) bibcheck = bibcheck.sty
+alias(4.1) concrete = concrete.sty
+alias(4.1) linsys = linsys.sty
+alias(4.1) mitpress = mitpress.sty
+alias(4.1) morefloats = morefloats.sty
+alias(4.1) nextpage = nextpage.sty
+alias(4.1) parskip = parskip.sty
+alias(4.1) path = path.sty
+alias(4.1) printlen = printlen.sty
+alias(4.1) relsize = relsize.sty
+alias(4.1) romanneg = romanneg.sty
+alias(4.1) secdot = secdot.sty
+alias(4.1) section = section.sty
+alias(4.1) selectp = selectp.sty
+alias(4.1) sepnum = sepnum.sty
+alias(4.1) shadow = shadow.sty
+alias(4.1) showtags = showtags.sty
+alias(4.1) sphack = sphack.sty
+alias(4.1) statex2 = statex2.sty
+alias(4.1) statex = statex.sty
+alias(4.1) subfigmat = subfigmat.sty
+alias(4.1) texilikecover = texilikecover.sty
+alias(4.1) thrmappendix = thrmappendix.sty
+alias(4.1) topcapt = topcapt.sty
+alias(4.1) varwidth = varwidth.sty
+alias(4.1) verbasef = verbasef.sty
+alias(4.1) version = version.sty
+alias(4.1) vertbars = vertbars.sty
+alias(4.1) vrbexin = vrbexin.sty
+alias(4.1) wrapfig = wrapfig.sty
+alias(0) theoremref = theoremref.sty
+alias(0) shadethm = shadethm.sty
+
+# The next line has no effect when this file is installed as the last
+# configuration file (default) but is useful when you install it as the "tricky"
+# configuration file (usually TEXMFHOME/texdoc/texdoc-dist.cnf) whose mere
+# existence is a hack to make it easier to run the the development version, see
+# <http://tug.org/texdoc/dev/>.
+#
+# It is strongly recommended NOT to use it in any other circumstance.
+lastfile_switch = true
--- /dev/null
+% original texmf.cnf -- runtime path configuration file for kpathsea.
+% Public domain.
+%
+% If you modify this original file, YOUR CHANGES WILL BE LOST when it is
+% updated. Instead, put your changes -- and only your changes, not an
+% entire copy of the full texmf.cnf! -- in ../../texmf.cnf. That is, if
+% this file is installed in /some/path/to/texlive/2011/texmf/web2c/texmf.cnf,
+% add your custom settings to /some/path/to/texlive/2011/texmf.cnf.
+%
+% What follows is a super-summary of what this .cnf file can
+% contain. Please read the Kpathsea manual for more information.
+%
+% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
+% The `=' (and surrounding spaces) is optional.
+% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
+% Long lines can be continued with a \.
+%
+% Earlier entries (in the same or another file) override later ones, and
+% an environment variable foo overrides any texmf.cnf definition of foo.
+%
+% All definitions are read before anything is expanded, so you can use
+% variables before they are defined.
+%
+% If a variable assignment is qualified with `.PROGRAM', it is ignored
+% unless the current executable (last filename component of argv[0]) is
+% named PROGRAM. This foo.PROGRAM construct is not recognized on the
+% right-hand side. For environment variables, use FOO_PROGRAM.
+%
+% Which file formats use which paths for searches is described in the
+% various programs' and the Kpathsea documentation (http://tug.org/kpathsea).
+%
+% // means to search subdirectories (recursively).
+% A leading !! means to look only in the ls-R db, never on the disk.
+% In this file, either ; or : can be used to separate path components.
+% A leading/trailing/doubled path separator in the paths will be
+% expanded into the compile-time default. Probably not what you want.
+%
+% Brace notation is supported, for example: /usr/local/{mytex,othertex}
+% expands to /usr/local/mytex:/usr/local/othertex. We make extensive
+% use of this.
+
+
--- /dev/null
+% \f Part 1: Search paths and directories.
+
+% This is the parent directory of our several trees, i.e.,
+% /usr/local/texlive/YYYY in the original TeX Live distribution.
+%
+% All trees must be organized according to the TeX Directory Structure
+% (http://tug.org/tds), or files may not be found.
+%
+% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share.
+TEXMFROOT = $SELFAUTODIR/share
+
+% The tree containing runtime files related to the specific
+% distribution and version.
+TEXMFMAIN = $TEXMFROOT/texmf
+
+% The main tree of packages, distribution-agnostic:
+TEXMFDIST = $TEXMFROOT/texmf-dist
+
+% The Gentoo site tree
+TEXMFSITE = $TEXMFROOT/texmf-site
+
+% Local additions to the distribution trees.
+TEXMFLOCAL = $TEXMFROOT/../local/share/texmf
+
+% TEXMFSYSVAR, where *-sys store cached runtime data.
+TEXMFSYSVAR = $SELFAUTOPARENT/var/lib/texmf
+
+% TEXMFSYSCONFIG, where *-sys store configuration data.
+TEXMFSYSCONFIG = $SELFAUTOPARENT/etc/texmf
+
+% Per-user texmf tree(s) -- organized per the TDS, as usual. To define
+% more than one per-user tree, set this to a list of directories in
+% braces, as described above. (This used to be HOMETEXMF.) ~ expands
+% to %USERPROFILE% on Windows, $HOME otherwise.
+TEXMFHOME = ~/texmf
+
+% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data.
+TEXMFVAR = ~/.texlive/texmf-var
+
+% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data.
+TEXMFCONFIG = ~/.texlive/texmf-config
+
+% List all the texmf trees.
+%
+% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named
+% explicitly and before all other trees.
+%
+% TEXMFLOCAL follows TEXMFMAIN (and precedes TEXMFDIST) because the
+% files in TEXMFMAIN are tightly coupled with the particular version of
+% the distribution, such as configuration files. Overriding them would
+% be more likely to cause trouble than help. On the other hand, the
+% bulk of packages and fonts are in TEXMFDIST, and locally-installed
+% versions should take precedence over those -- although it is generally
+% a source of confusion to have different versions of a package
+% installed, whatever the trees, so try to avoid it.
+TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFSITE,!!$TEXMFDIST}
+
+% Where to look for ls-R files. There need not be an ls-R in the
+% directories in this path, but if there is one, Kpathsea will use it.
+% By default, this is only the !! elements of TEXMF, so that mktexlsr
+% does not create ls-R files in the non-!! elements -- because if an
+% ls-R is present, it will be used, and the disk will not be searched.
+% This is arguably a bug in kpathsea.
+TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFSITE,!!$TEXMFDIST}
+
+% The system trees. These are the trees that are shared by all users.
+% If a tree appears in this list, the mktex* scripts will use
+% VARTEXFONTS for generated files, if the original tree isn't writable;
+% otherwise the current working directory is used.
+SYSTEXMF = $TEXMFSYSVAR;$TEXMFMAIN;$TEXMFLOCAL;$TEXMFSITE;$TEXMFDIST
+
+% We use GLOBALVARTEXFONTS in order to always be able to search in the global
+% font cache even if VARTEXFONTS is overridden.
+GLOBALVARTEXFONTS = $SELFAUTOPARENT/var/cache/fonts
+
+% Where generated fonts may be written. This tree is used when the sources
+% were found in a system tree and either that tree wasn't writable, or the
+% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
+VARTEXFONTS = $GLOBALVARTEXFONTS
+
+% On some systems, there will be a system tree which contains all the font
+% files that may be created as well as the formats. For example
+% TEXMFVAR = /var/lib/texmf
+% is used in many distros. In this case, set VARTEXFONTS like this
+%VARTEXFONTS = $TEXMFVAR/fonts
+% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR).
+%
+% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
+% one of the TEXMF directories (avoids overlapping ls-R files).
+
+
--- /dev/null
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Usually you will not need to edit any of the following variables.
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% WEB2C is for Web2C specific files. The current directory may not be
+% a good place to look for them.
+WEB2C = $TEXMF/web2c
+
+% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
+% or \openin, including .sty, .eps, etc. We specify paths for all known
+% formats, past or present. Not all of them are built these days.
+
+% Plain TeX. Have the command tex check all directories as a last
+% resort, we may have plain-compatible stuff anywhere.
+TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}//
+
+% Fontinst needs to read afm files.
+TEXINPUTS.fontinst = .;$TEXMF/{tex,fonts/afm}//
+
+% Other plain-based formats.
+TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}//
+TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.eplain = .;$TEXMF/tex/{eplain,plain,generic,}//
+TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}//
+TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
+
+% LaTeX 2e specific macros are stored in latex/, macros that can only be
+% used with 2.09 in latex209/. In addition, we look in the directory
+% latex209, useful for macros that were written for 2.09 and do not
+% mention 2e at all, but can be used with 2e.
+TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}//
+TEXINPUTS.olatex = .;$TEXMF/tex/{latex,generic,}//
+
+% MLTeX.
+TEXINPUTS.frlatex = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frtex = .;$TEXMF/tex/{french,plain,generic,}//
+TEXINPUTS.mllatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.mltex = .;$TEXMF/tex/{plain,generic,}//
+
+% e-TeX.
+TEXINPUTS.elatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.etex = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfTeX.
+TEXINPUTS.pdfcslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.pdfcsplain = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.pdflatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfmex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.utf8mex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.pdftex = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.pdftexinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
+TEXINPUTS.pdfamstex = .;$TEXMF/tex/{amstex,plain,generic,}//
+
+% pdfeTeX.
+TEXINPUTS.pdfelatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfetex = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfxTeX.
+TEXINPUTS.pdfxlatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfxmex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.pdfxtex = .;$TEXMF/tex/{plain,generic,}//
+
+% LuaTeX.
+TEXINPUTS.lualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+TEXINPUTS.luatex = .;$TEXMF/tex/{luatex,plain,generic,}//
+TEXINPUTS.dvilualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+TEXINPUTS.dviluatex = .;$TEXMF/tex/{luatex,plain,generic,}//
+
+% XeTeX.
+TEXINPUTS.xelatex = .;$TEXMF/tex/{xelatex,latex,xetex,generic,}//
+TEXINPUTS.xeplain = .;$TEXMF/tex/{xeplain,eplain,plain,xetex,generic,}//
+TEXINPUTS.xetex = .;$TEXMF/tex/{xetex,plain,generic,}//
+
+% Omega / Aleph.
+TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.elambda = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.eomega = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.lamed = .;$TEXMF/tex/{lamed,lambda,latex,generic,}//
+TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}//
+
+% p(La)TeX.
+TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
+TEXINPUTS.platex = .;$TEXMF/tex/{platex,ptexgeneric,latex,generic,}//
+
+% epTeX.
+TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
+
+% pBibTeX bibliographies and style files.
+BIBINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bib//
+BSTINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bst//
+
+% ConTeXt.
+TEXINPUTS.context = .;$TEXMF/tex/{context,plain,generic}//
+
+% jadetex.
+TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,latex,generic,}//
+TEXINPUTS.pdfjadetex = .;$TEXMF/tex/{jadetex,latex,generic,}//
+
+% XMLTeX.
+TEXINPUTS.xmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
+TEXINPUTS.pdfxmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
+
+% Miscellany, no longer built.
+TEXINPUTS.lamstex = .;$TEXMF/tex/{lamstex,plain,generic,}//
+TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}//
+TEXINPUTS.frpdflatex = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frpdftex = .;$TEXMF/tex/{french,plain,generic,}//
+
+% Earlier entries override later ones, so put this generic one last.
+TEXINPUTS = .;$TEXMF/tex/{$progname,generic,}//
+
+% ttf2tfm.
+TTF2TFMINPUTS = .;$TEXMF/ttf2pk//
+
+% Metafont, MetaPost inputs.
+MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/source//
+MPINPUTS = .;$TEXMF/metapost//
+
+% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read.
+% We want to find the engine-specific file, e.g., cont-en.fmt can
+% exist under both pdftex/ and xetex/. But just in case some formats
+% end up without an engine directory, look directly in web2c/ too.
+% We repeat the same definition three times because of the way fmtutil
+% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats
+% will not be found.
+TEXFORMATS = .;$TEXMF/web2c{/$engine,}
+MFBASES = .;$TEXMF/web2c{/$engine,}
+MPMEMS = .;$TEXMF/web2c{/$engine,}
+%
+% As of 2008, pool files don't exist any more (the strings are compiled
+% into the binaries), but just in case something expects to find these:
+TEXPOOL = .;$TEXMF/web2c
+MFPOOL = ${TEXPOOL}
+MPPOOL = ${TEXPOOL}
+
+% support the original xdvi. Must come before the generic settings.
+PKFONTS.XDvi = .;$TEXMF/%s;{$GLOBALVARTEXFONTS,$VARTEXFONTS}/pk/{%m,modeless}//
+VFFONTS.XDvi = .;$TEXMF/%s
+PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}//
+TEXPICTS.XDvi = .;$TEXMF/%q{dvips,tex}//
+
+% Device-independent font metric files.
+VFFONTS = .;$TEXMF/fonts/vf//
+TFMFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/tfm//
+
+% The $MAKETEX_MODE below means the drivers will not use a cx font when
+% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init
+% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual.
+% The modeless part guarantees that bitmaps for PostScript fonts are found.
+PKFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
+
+% Similarly for the GF format, which only remains in existence because
+% Metafont outputs it (and MF isn't going to change).
+GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//
+
+% A backup for PKFONTS and GFFONTS. Not used for anything.
+GLYPHFONTS = .;$TEXMF/fonts
+
+% A place to puth everything that doesn't fit the other font categories.
+MISCFONTS = .;$TEXMF/fonts/misc//
+
+% font name map files. This isn't just fonts/map// because ConTeXt
+% wants support for having files with the same name in the different
+% subdirs. Maybe if the programs ever get unified to accepting the same
+% map file syntax the definition can be simplified again.
+TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//
+
+% BibTeX bibliographies and style files. bibtex8 also uses these.
+BIBINPUTS = .;$TEXMF/bibtex/bib//
+BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}//
+
+% MlBibTeX.
+MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}//
+MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}//
+
+% MFT style files.
+MFTINPUTS = .;$TEXMF/mft//
+
+% PostScript headers and prologues (.pro); unfortunately, some programs
+% also use this for acessing font files (enc, type1, truetype)
+TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}//
+TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}//
+
+% OSFONTDIR is to provide a convenient hook for allowing TeX to find
+% fonts installed on the system (outside of TeX). An empty default
+% value would add "//" to the search paths, so we give it a dummy value.
+OSFONTDIR = /please/set/osfontdir/in/the/environment
+
+% PostScript Type 1 outline fonts.
+T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR//
+
+% PostScript AFM metric files.
+AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR//
+
+% TrueType outline fonts.
+TTFONTS = .;$TEXMF/fonts/{truetype,opentype}//;$OSFONTDIR//
+
+% OpenType outline fonts.
+OPENTYPEFONTS = .;$TEXMF/fonts/{opentype,truetype}//;$OSFONTDIR//
+
+% Type 42 outline fonts.
+T42FONTS = .;$TEXMF/fonts/type42//
+
+% Ligature definition files.
+LIGFONTS = .;$TEXMF/fonts/lig//
+
+% Dvips' config.* files (this name should not start with `TEX'!).
+TEXCONFIG = $TEXMF/dvips//
+
+% Makeindex style (.ist) files.
+INDEXSTYLE = .;$TEXMF/makeindex//
+
+% Font encoding files (.enc).
+ENCFONTS = .;$TEXMF/fonts/enc//
+
+% CMap files.
+CMAPFONTS = .;$TEXMF/fonts/cmap//
+
+% Subfont definition files.
+SFDFONTS = .;$TEXMF/fonts/sfd//
+
+% OpenType feature files (.fea).
+FONTFEATURES=.;$TEXMF/fonts/fea//
+
+% .cid and .cidmap
+FONTCIDMAPS=.;$TEXMF/fonts/cid//
+
+% pdftex config files:
+PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}//
+
+% Used by DMP (ditroff-to-mpx), called by makempx -troff.
+TRFONTS = $SELFAUTODIR{/local,}/share/groff/{current/font,site-font}/devps
+MPSUPPORT = .;$TEXMF/metapost/support
+
+% For xdvi to find mime.types and .mailcap, if they do not exist in
+% ~. These are single directories, not paths.
+% (But the default mime.types, at least, may well suffice.)
+MIMELIBDIR = $SELFAUTOPARENT/etc
+MAILCAPLIBDIR = $SELFAUTOPARENT/etc
+
+% Default settings for fontconfig library, used by Windows versions of
+% xetex/xdvipdfmx. On Unixish systems, fontconfig ignores this.
+FONTCONFIG_FILE=fonts.conf
+FONTCONFIG_PATH=$TEXMFSYSVAR/fonts/conf
+FC_CACHEDIR=$TEXMFSYSVAR/fonts/cache
+
+% TeX documentation and source files, for use with texdoc and kpsewhich.
+TEXDOCS = $TEXMF/doc//
+TEXSOURCES = .;$TEXMF/source//
+
+% Web and CWeb input paths.
+WEBINPUTS = .;$TEXMF/web//
+CWEBINPUTS = .;$TEXMF/cweb//
+
+% Omega-related fonts and other files.
+OFMFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/{ofm,tfm}//
+OPLFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/opl//
+OVFFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/{ovf,vf}//
+OVPFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/ovp//
+OTPINPUTS = .;$TEXMF/omega/otp//
+OCPINPUTS = .;$TEXMF/omega/ocp//
+
+% Some additional input variables for several programs. If you add
+% a program that uses the `other text files' or `other binary files'
+% search formats, you'll want to add their variables here as well.
+T4HTINPUTS = .;$TEXMF/tex4ht//
+
+%% t4ht utility, sharing files with TeX4ht
+TEX4HTFONTSET=alias,iso8859,unicode
+TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}//
+
+% TeXworks editor configuration and settings
+TW_LIBPATH = $TEXMFCONFIG/texworks
+TW_INIPATH = $TW_LIBPATH
+
+% For security, do not look in . for dvipdfmx.cfg, since the D option
+% would allow command execution.
+DVIPDFMXINPUTS = $TEXMF/dvipdfmx
+
+% Find scripts that are distributed/installed in the texmf tree.
+
+% Lua needs to look in TEXINPUTS for lua scripts distributed with packages.
+LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXINPUTS
+
+% Lua needs to look for binary lua libraries distributed with packages.
+CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua//
+
+% Architecture independent executables.
+TEXMFSCRIPTS = $TEXMF/scripts/{$progname,$engine,}//
+
+% Other languages.
+JAVAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/java//
+PERLINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/perl//
+PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python//
+RUBYINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/ruby//
+
+
+%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
+% KPSE_DOT = .
+
+% This definition isn't used from this .cnf file itself (that would be
+% paradoxical), but the compile-time default in paths.h is built from it.
+% The SELFAUTO* variables are set automatically from the location of
+% argv[0], in kpse_set_program_name.
+%
+% This main texmf.cnf file is installed, for a release YYYY, in a
+% directory such as /usr/local/texlive/YYYY/texmf/web2c/texmf.cnf.
+% Since this file is subject to future updates, the TeX Live installer
+% or human administrator may also create a file
+% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file
+% will take precedence over the distributed one under texmf/web2c.
+%
+% For security reasons, it is better not to include . in this path.
+%
+TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
+
+% kpathsea 3.5.3 and later sets these at runtime. To avoid empty
+% expansions from binaries linked against an earlier version of the
+% library, we set $progname and $engine to something non-empty:
+progname = unsetprogname
+engine = unsetengine
+
+
+
+
--- /dev/null
+% \f Part 2: Options.
+
+% If this option is set to true, `tex a.b' will look first for a.b.tex
+% (within each path element), and then for a.b, i.e., we try standard
+% extensions first. If this is false, we first look for a.b and then
+% a.b.tex, i.e., we try the name as-is first.
+%
+% Both names are always tried; the difference is the order in which they
+% are tried. The setting applies to all searches, not just .tex.
+%
+% This setting only affects names being looked up which *already* have
+% an extension. A name without an extension (e.g., `tex story') will
+% always have an extension added first.
+%
+% The default is true, because we already avoid adding the standard
+% extension(s) in the usual cases. E.g., babel.sty will only look for
+% babel.sty, not babel.sty.tex, regardless of this setting.
+try_std_extension_first = t
+
+% Enable system commands via \write18{...}. When enabled fully (set to
+% t), obviously insecure. When enabled partially (set to p), only the
+% commands listed in shell_escape_commands are allowed. Although this
+% is not fully secure either, it is much better, and so useful that we
+% enable it for everything but bare tex.
+shell_escape = p
+
+% No spaces in this command list.
+%
+% The programs listed here are as safe as any we know: they either do
+% not write any output files, respect openout_any, or have hard-coded
+% restrictions similar or higher to openout_any=p. They also have no
+% features to invoke arbitrary other programs, and no known exploitable
+% bugs. All to the best of our knowledge. They also have practical use
+% for being called from TeX.
+%
+shell_escape_commands = \
+bibtex,bibtex8,\
+kpsewhich,\
+makeindex,\
+repstopdf,\
+
+% we'd like to allow:
+% dvips - but external commands can be executed, need at least -R1.
+% epspdf, ps2pdf, pstopdf - need to respect openout_any,
+% and gs -dSAFER must be used and check for shell injection with filenames.
+% (img)convert (ImageMagick) - delegates.mgk possible misconfig, besides,
+% without Unix convert it hardly seems worth it, and Windows convert
+% is something completely different that destroys filesystems, so skip.
+% pygmentize - but is the filter feature insecure?
+% ps4pdf - but it calls an unrestricted latex.
+% rpdfcrop - maybe ok, but let's get experience with repstopdf first.
+% texindy,xindy - but is the module feature insecure?
+% ulqda - but requires optional SHA1.pm, so why bother.
+% tex, latex, etc. - need to forbid --shell-escape, and inherit openout_any.
+
+% plain TeX should remain unenhanced.
+shell_escape.tex = f
+shell_escape.initex = f
+
+% This is used by the Windows script wrapper for restricting searching
+% for the purportedly safe shell_escape_commands above to system
+% directories.
+TEXMF_RESTRICTED_SCRIPTS = \
+ {!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}/scripts/{$progname,$engine,}//
+
+% Allow TeX \openin, \openout, or \input on filenames starting with `.'
+% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
+% a (any) : any file can be opened.
+% r (restricted) : disallow opening "dotfiles".
+% p (paranoid) : as `r' and disallow going to parent directories, and
+% restrict absolute paths to be under $TEXMFOUTPUT.
+openout_any = p
+openin_any = a
+
+% Write .log/.dvi/etc. files here, if the current directory is unwritable.
+%TEXMFOUTPUT = /tmp
+
+% If a dynamic file creation fails, log the command to this file, in
+% either the current directory or TEXMFOUTPUT. Set to the
+% empty string or 0 to avoid logging.
+MISSFONT_LOG = missfont.log
+
+% Set to a colon-separated list of words specifying warnings to suppress.
+% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
+% TEX_HUSH = checksum:lostchar:readable:special
+% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
+TEX_HUSH = none
+
+% Allow TeX, and MF to parse the first line of an input file for
+% the %&format construct.
+parse_first_line = t
+
+% But don't parse the first line if invoked as "tex", since we want that
+% to remain Knuth-compatible. The src_specials and
+% file_line_error_style settings, as well as the options -enctex,
+% -mltex, -8bit, etc., also affect this, but they are all off by default.
+parse_first_line.tex = f
+parse_first_line.initex = f
+
+% Control file:line:error style messages.
+file_line_error_style = f
+
+% Enable the mktex... scripts by default? These must be set to 0 or 1.
+% Particular programs can and do override these settings, for example
+% dvips's -M option. Your first chance to specify whether the scripts
+% are invoked by default is at configure time.
+%
+% These values are ignored if the script names are changed; e.g., if you
+% set DVIPSMAKEPK to `foo', what counts is the value of the environment
+% variable/config value `FOO', not the `MKTEXPK' value.
+%
+%MKTEXTEX = 0
+%MKTEXPK = 0
+%MKTEXMF = 0
+%MKTEXTFM = 0
+%MKTEXFMT = 0
+%MKOCP = 0
+%MKOFM = 0
+
+% Used by makempx to run TeX. We use "etex" because MetaPost is
+% expecting DVI, and not "tex" because we want first line parsing.
+TEX = etex
+
+% These variables specify the external program called for the
+% interactive `e' option. %d is replaced by the line number and %s by
+% the current filename. The default is specified at compile-time, and
+% we let that stay in place since different platforms like different values.
+%TEXEDIT = vi +%d '%s' % default for Unix
+%TEXEDIT = texworks --position=+%d "%s" % default for Windows
+%MFEDIT = ${TEXEDIT}
+%MPEDIT = ${TEXEDIT}
+
+% The default `codepage and sort order' file for BibTeX8, when none is
+% given as command line option or environment variable.
+BIBTEX_CSFILE = 88591lat.csf
+
+% This variable is specific to Windows. It must be set to 0 or 1. The
+% default is 0. Setting it to 1 tells the Windows script wrappers to
+% use an already installed Perl interpreter if one is found on the
+% search path, in preference to the Perl shipped with TeX Live. Thus,
+% it may be useful if you both (a) installed a full Perl distribution
+% for general use, and (b) need to run Perl programs from TL that use
+% additional modules we don't provide. The TL Perl does provide all the
+% standard Perl modules.
+%
+%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0
+
+
+
--- /dev/null
+% \f Part 3: Array and other sizes for TeX (and Metafont).
+%
+% If you want to change some of these sizes only for a certain TeX
+% variant, the usual dot notation works, e.g.,
+% main_memory.hugetex = 20000000
+%
+% If a change here appears to be ignored, try redumping the format file.
+
+% Memory. Must be less than 8,000,000 total.
+%
+% main_memory is relevant only to initex, extra_mem_* only to non-ini.
+% Thus, have to redump the .fmt file after changing main_memory; to add
+% to existing fmt files, increase extra_mem_*. (To get an idea of how
+% much, try \tracingstats=2 in your TeX source file;
+% web2c/tests/memtest.tex might also be interesting.)
+%
+% To increase space for boxes (as might be needed by, e.g., PiCTeX),
+% increase extra_mem_bot.
+%
+% For some xy-pic samples, you may need as much as 700000 words of memory.
+% For the vast majority of documents, 60000 or less will do.
+%
+main_memory = 3000000 % words of inimemory available; also applies to inimf&mp
+extra_mem_top = 0 % extra high memory for chars, tokens, etc.
+extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc.
+
+% ConTeXt needs lots of memory.
+extra_mem_top.context = 2000000
+extra_mem_bot.context = 4000000
+
+% Words of font info for TeX (total size of all TFM files, approximately).
+% Must be >= 20000 and <= 147483647 (without tex.ch changes).
+font_mem_size = 3000000
+
+% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes).
+font_max = 9000
+
+% Extra space for the hash table of control sequences.
+hash_extra = 200000
+
+% Max number of characters in all strings, including all error messages,
+% help texts, font names, control sequences. These values apply to TeX.
+pool_size = 3250000
+% Minimum pool space after TeX's own strings; must be at least
+% 25000 less than pool_size, but doesn't need to be nearly that large.
+string_vacancies = 90000
+% Maximum number of strings.
+max_strings = 500000
+% min pool space left after loading .fmt
+pool_free = 47500
+
+% Buffer size. TeX uses the buffer to contain input lines, but macro
+% expansion works by writing material into the buffer and reparsing the
+% line. As a consequence, certain constructs require the buffer to be
+% very large, even though most documents can be handled with a small value.
+buf_size = 200000
+
+% Hyphenation trie. The maximum possible is 4194303 (ssup_trie_size in
+% the sources), but we don't need that much. The value here suffices
+% for all known free hyphenation patterns to be loaded simultaneously
+% (as TeX Live does).
+%
+trie_size = 1000000
+
+hyph_size = 8191 % prime number of hyphenation exceptions, >610, <32767.
+ % http://primes.utm.edu/curios/page.php/8191.html
+nest_size = 500 % simultaneous semantic levels (e.g., groups)
+max_in_open = 15 % simultaneous input files and error insertions,
+ % also applies to MetaPost
+param_size = 10000 % simultaneous macro parameters, also applies to MP
+save_size = 50000 % for saving values outside current group
+stack_size = 5000 % simultaneous input sources
+
+% These are Omega-specific.
+ocp_buf_size = 500000 % character buffers for ocp filters.
+ocp_stack_size = 10000 % stacks for ocp computations.
+ocp_list_size = 1000 % control for multiple ocps.
+
+% These work best if they are the same as the I/O buffer size, but it
+% doesn't matter much. Must be a multiple of 8.
+dvi_buf_size = 16384 % TeX
+gf_buf_size = 16384 % MF
+
+% It's probably inadvisable to change these. At any rate, we must have:
+% 45 < error_line < 255;
+% 30 < half_error_line < error_line - 15;
+% 60 <= max_print_line;
+% These apply to TeX, Metafont, and MetaPost.
+error_line = 79
+half_error_line = 50
+max_print_line = 79
+
+% Metafont only.
+screen_width.mf = 1664
+screen_depth.mf = 1200
+
+% BibTeX only (max_strings also determines hash_size and hash_prime).
+ent_str_size = 250
+glob_str_size = 5000
+max_strings.bibtex = 35307
+max_strings.bibtex8 = 35307
+max_strings.bibtexu = 35307
+max_strings.pbibtex = 35307
+
+% GFtype only.
+line_length.gftype = 500
+max_rows.gftype = 8191
+max_cols.gftype = 8191
--- /dev/null
+# Generated by /home/texlive/karl/Master/bin/i386-linux/tlmgr on Sun Oct 3 04:04:52 2010
+# $Id: updmap-hdr.cfg 11382 2008-11-20 18:59:26Z karl $
+#
+# The full updmap.cfg is generated by concatenating updmap-hdr.cfg with
+# all the Map and MixedMap lines from an installation, possibly
+# appending a local configuration file.
+#
+# To make local customizations to the map files, please use of the
+# following methods:
+#
+# 1) call
+# updmap-sys --enable Map=foo.map
+# for each map file. (Or MixedMap instead of Map, if your font has
+# both Metafont and outline definitions.) See the updmap --help
+# documentation.
+#
+# 2) add your local map entries to the file
+# TEXMFLOCAL/web2c/updmap-local.cfg
+# and then call
+# tlmgr generate updmap
+# which will concatenate updmap-local.cfg to the end of the final
+# updmap.cfg. (You can override the local.cfg file location with the
+# --localcfg option; see tlmgr --help.)
+#
+# If you use either of these methods, your local adaptations will be
+# preserved when tlmgr updates the installation or this config file.
+# Manual edits to updmap.cfg may be lost on update.
+
+
+################################################################
+# OPTIONS
+################################################################
+
+#
+# dvipsPreferOutline
+#
+# Should dvips (by default) prefer bitmap fonts or outline fonts
+# if both are available? Independent of this setting, outlines
+# can be forced by putting "p psfonts_t1.map" into a config file
+# that dvips reads. Bitmaps (for the fonts in question) can
+# be forced by putting "p psfonts_pk.map" into a config file.
+# We provide such config files which can be enabled via
+# dvips -Poutline ... resp. dvips -Ppk ...
+#
+# Valid settings for dvipsPreferOutline are true / false:
+dvipsPreferOutline true
+
+#
+# LW35
+#
+# Which fonts for the "Basic 35 Laserwriter Fonts" do you want to use and
+# how are the filenames chosen? Valid settings:
+# URW: URW fonts with "vendor" filenames (e.g. n019064l.pfb)
+# URWkb: URW fonts with "berry" filenames (e.g. uhvbo8ac.pfb)
+# ADOBE: Adobe fonts with "vendor" filenames (e.g. hvnbo___.pfb)
+# ADOBEkb: Adobe fonts with "berry" filenames (e.g. phvbo8an.pfb)
+LW35 URWkb
+
+#
+# dvipsDownloadBase35
+#
+# Should dvips (by default) download the standard 35 LaserWriter fonts
+# with the document (then set dvipsDownloadBase35 true) or should these
+# fonts be used from the ps interpreter / printer?
+# Whatever the default is, the user can override it by specifying
+# dvips -Pdownload35 ... resp. dvips -Pbuiltin35 ... to either download
+# the LW35 fonts resp. use the built-in fonts.
+#
+# Valid settings are true / false:
+dvipsDownloadBase35 false
+
+#
+# pdftexDownloadBase14
+#
+# Should pdftex download the base 14 pdf fonts? Since some configurations
+# (ps / pdf tools / printers) use bad default fonts, it is safer to download
+# the fonts. The pdf files will get bigger, though.
+# Valid settings are true (download the fonts) or false (don't download
+# the fonts). Adobe recommends embedding all fonts.
+pdftexDownloadBase14 true
+
+#
+# dvipdfmDownloadBase14
+#
+# Should dvipdfm download the base 14 pdf fonts? Since some configurations
+# (ps / pdf tools / printers) use bad default fonts, it is safer to download
+# the fonts. The pdf files will get bigger, though.
+# Valid settings are true (download the fonts) or false (don't download
+# the fonts).
+dvipdfmDownloadBase14 true
+
+################################################################
+# Map files.
+################################################################
+#
+# There are two possible entries: Map and MixedMap. Both have one additional
+# argument: the filename of the map file. MixedMap ("mixed" means that
+# the font is available as bitmap and as outline) lines will not be used
+# in the default map of dvips if dvipsPreferOutline is false. Inactive
+# Map files should be marked by "#! " (without the quotes), not just #.
+#
+
+#! Map OrnementsADF.map
+#! Map ArrowsADF.map
+#! Map BulletsADF.map
+#! MixedMap allrunes.map
+#! Map euler.map
+#! MixedMap cm.map
+#! MixedMap cmextra.map
+#! MixedMap cyrillic.map
+#! MixedMap latxfont.map
+#! MixedMap symbols.map
+#! Map uaq.map
+#! Map antt.map
+#! Map arabi.map
+#! MixedMap arabtex.map
+#! Map archaicprw.map
+#! Map arev.map
+#! Map bkaiu.map
+#! Map bsmiu.map
+#! Map gbsnu.map
+#! Map gkaiu.map
+#! Map ascii.map
+#! Map augie.map
+#! Map auncial.map
+#! Map aurical.map
+#! Map ybv.map
+#! Map belleek.map
+#! Map bera.map
+#! Map ybd.map
+#! Map pbsi.map
+#! Map burmese.map
+#! Map cmin.map
+#! MixedMap cbgreek-full.map
+#! MixedMap ccpl.map
+#! Map ccicons.map
+#! Map clm.map
+#! Map chemarrow.map
+#! Map cjhebrew.map
+#! MixedMap cmtext-bsr-interpolated.map
+#! Map cm-lgc.map
+#! MixedMap cm-super-t1.map
+#! MixedMap cm-super-t2a.map
+#! MixedMap cm-super-t2b.map
+#! MixedMap cm-super-t2c.map
+#! MixedMap cm-super-ts1.map
+#! MixedMap cm-super-x2.map
+#! Map cmcyr.map
+#! MixedMap cmll.map
+#! MixedMap csother.map
+#! MixedMap cstext.map
+#! Map cyklop.map
+#! Map dictsym.map
+#! Map dstroke.map
+#! Map yes.map
+#! Map epigrafica.map
+#! Map epiolmec.map
+#! MixedMap esint.map
+#! Map esvect.map
+#! MixedMap ethiop.map
+#! Map zpeu.map
+#! MixedMap eurosym.map
+#! Map fge.map
+#! Map foekfont.map
+#! Map fonetika.map
+#! Map fourier-utopia-expert.map
+#! Map fourier.map
+#! Map garuda-c90.map
+#! Map gfsartemisia.map
+#! Map gfsbaskerville.map
+#! Map gfsbodoni.map
+#! Map gfscomplutum.map
+#! Map gfsdidot.map
+#! Map gfsneohellenic.map
+#! Map gfsporson.map
+#! Map gfssolomos.map
+#! Map yfrak.map
+#! Map troff-updmap.map
+#! Map ugq.map
+#! Map grverb.map
+#! MixedMap hfbright.map
+#! MixedMap iby.map
+#! Map fi4.map
+#! Map Acorn.map
+#! Map AnnSton.map
+#! Map ArtNouv.map
+#! Map ArtNouvc.map
+#! Map Carrickc.map
+#! Map Eichenla.map
+#! Map Eileen.map
+#! Map EileenBl.map
+#! Map Elzevier.map
+#! Map GotIn.map
+#! Map GoudyIn.map
+#! Map Kinigcap.map
+#! Map Konanur.map
+#! Map Kramer.map
+#! Map MorrisIn.map
+#! Map Nouveaud.map
+#! Map Romantik.map
+#! Map Rothdn.map
+#! Map RoyalIn.map
+#! Map Sanremo.map
+#! Map Starburst.map
+#! Map Typocaps.map
+#! Map Zallman.map
+#! Map iwona.map
+#! Map kerkis.map
+#! Map knitfont.map
+#! Map kpfonts.map
+#! Map kurier.map
+#! Map libertine.map
+#! Map yly.map
+#! Map linearA.map
+#! Map l7x-urwvn.map
+#! Map lm.map
+#! MixedMap lxfonts.map
+#! MixedMap manfnt.map
+#! Map marvosym.map
+#! Map mdbch.map
+#! Map mdput.map
+#! Map mdugm.map
+#! MixedMap mflogo.map
+#! Map MnSymbol.map
+#! MixedMap mongolian.map
+#! MixedMap musix.map
+#! Map norasi-c90.map
+#! Map cherokee.map
+#! Map oinuit.map
+#! Map omega.map
+#! Map phaistos.map
+#! MixedMap pigpen.map
+#! MixedMap plother.map
+#! MixedMap pltext.map
+#! Map ap.map
+#! Map charter.map
+#! Map fpls.map
+#! Map pazo.map
+#! Map utopia.map
+#! Map pxfonts.map
+#! Map recycle.map
+#! Map yrd.map
+#! MixedMap rsfs.map
+#! Map skt.map
+#! MixedMap semaf.map
+#! Map SkakNew.map
+#! Map starfont.map
+#! Map icelandic.map
+#! MixedMap stmaryrd.map
+#! Map tabvar.map
+#! Map qag.map
+#! Map qbk.map
+#! Map qcr.map
+#! Map qcs.map
+#! Map qhv.map
+#! Map qpl.map
+#! Map qtm.map
+#! Map qzc.map
+#! MixedMap tipa.map
+#! MixedMap trajan.map
+#! Map txfonts.map
+#! Map gptimes.map
+#! Map umj.map
+#! MixedMap dvng.map
+#! Map yv1.map
+#! Map yv2.map
+#! Map yv3.map
+#! Map yvo.map
+#! Map yvt.map
+#! Map arevvn.map
+#! Map chartervn.map
+#! Map cmbrightvn.map
+#! Map concretevn.map
+#! Map grotesqvn.map
+#! Map txttvn.map
+#! Map urwvn.map
+#! MixedMap vnrother.map
+#! MixedMap vnrtext.map
+#! Map vntopia.map
+#! Map dgj.map
+#! Map dmj.map
+#! Map mc2j.map
+#! Map mcj.map
+#! Map mr2j.map
+#! Map mrj.map
+#! MixedMap wasy.map
+#! MixedMap xypic.map
+#! MixedMap yhmath.map
+#! Map slantcm.map
--- /dev/null
+Map euler.map
+MixedMap cmextra.map
+MixedMap cm.map
+MixedMap cyrillic.map
+MixedMap latxfont.map
+MixedMap symbols.map
+MixedMap cmtext-bsr-interpolated.map
+MixedMap mflogo.map
--- /dev/null
+MixedMap cm-super-t1.map
+MixedMap cm-super-t2a.map
+MixedMap cm-super-t2b.map
+MixedMap cm-super-t2c.map
+MixedMap cm-super-ts1.map
+MixedMap cm-super-x2.map
+Map zpeu.map
+MixedMap eurosym.map
+Map lm.map
+Map marvosym.map
+Map pxfonts.map
+MixedMap rsfs.map
+Map qag.map
+Map qbk.map
+Map qcr.map
+Map qcs.map
+Map qhv.map
+Map qpl.map
+Map qtm.map
+Map qzc.map
+MixedMap tipa.map
+Map txfonts.map
+MixedMap wasy.map
--- /dev/null
+Map charter.map
+Map fpls.map
+Map pazo.map
+Map utopia.map
--- /dev/null
+# Generated for texlive-basic by texlive-module.eclass
+dviluatex luatex language.def,language.dat.lua dviluatex.ini
+luatex luatex language.def,language.dat.lua luatex.ini
+mf mf-nowin - -translate-file=cp227.tcx mf.ini
+etex pdftex language.def -translate-file=cp227.tcx *etex.ini
+pdfetex pdftex language.def -translate-file=cp227.tcx *pdfetex.ini
+pdftex pdftex language.def -translate-file=cp227.tcx *pdfetex.ini
+tex tex - tex.ini
+# Generated for texlive-latex by texlive-module.eclass
+dvilualatex luatex language.dat,language.dat.lua dvilualatex.ini
+latex pdftex language.dat -translate-file=cp227.tcx *latex.ini
+lualatex luatex language.dat,language.dat.lua lualatex.ini
+pdflatex pdftex language.dat -translate-file=cp227.tcx *pdflatex.ini
+mptopdf pdftex - -translate-file=cp227.tcx mptopdf.tex
--- /dev/null
+% original texmf.cnf -- runtime path configuration file for kpathsea.
+% Public domain.
+%
+% If you modify this original file, YOUR CHANGES WILL BE LOST when it is
+% updated. Instead, put your changes -- and only your changes, not an
+% entire copy of the full texmf.cnf! -- in ../../texmf.cnf. That is, if
+% this file is installed in /some/path/to/texlive/2011/texmf/web2c/texmf.cnf,
+% add your custom settings to /some/path/to/texlive/2011/texmf.cnf.
+%
+% What follows is a super-summary of what this .cnf file can
+% contain. Please read the Kpathsea manual for more information.
+%
+% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
+% The `=' (and surrounding spaces) is optional.
+% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
+% Long lines can be continued with a \.
+%
+% Earlier entries (in the same or another file) override later ones, and
+% an environment variable foo overrides any texmf.cnf definition of foo.
+%
+% All definitions are read before anything is expanded, so you can use
+% variables before they are defined.
+%
+% If a variable assignment is qualified with `.PROGRAM', it is ignored
+% unless the current executable (last filename component of argv[0]) is
+% named PROGRAM. This foo.PROGRAM construct is not recognized on the
+% right-hand side. For environment variables, use FOO_PROGRAM.
+%
+% Which file formats use which paths for searches is described in the
+% various programs' and the Kpathsea documentation (http://tug.org/kpathsea).
+%
+% // means to search subdirectories (recursively).
+% A leading !! means to look only in the ls-R db, never on the disk.
+% In this file, either ; or : can be used to separate path components.
+% A leading/trailing/doubled path separator in the paths will be
+% expanded into the compile-time default. Probably not what you want.
+%
+% Brace notation is supported, for example: /usr/local/{mytex,othertex}
+% expands to /usr/local/mytex:/usr/local/othertex. We make extensive
+% use of this.
+
+
+% \f Part 1: Search paths and directories.
+
+% This is the parent directory of our several trees, i.e.,
+% /usr/local/texlive/YYYY in the original TeX Live distribution.
+%
+% All trees must be organized according to the TeX Directory Structure
+% (http://tug.org/tds), or files may not be found.
+%
+% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share.
+TEXMFROOT = $SELFAUTODIR/share
+
+% The tree containing runtime files related to the specific
+% distribution and version.
+TEXMFMAIN = $TEXMFROOT/texmf
+
+% The main tree of packages, distribution-agnostic:
+TEXMFDIST = $TEXMFROOT/texmf-dist
+
+% The Gentoo site tree
+TEXMFSITE = $TEXMFROOT/texmf-site
+
+% Local additions to the distribution trees.
+TEXMFLOCAL = $TEXMFROOT/../local/share/texmf
+
+% TEXMFSYSVAR, where *-sys store cached runtime data.
+TEXMFSYSVAR = $SELFAUTOPARENT/var/lib/texmf
+
+% TEXMFSYSCONFIG, where *-sys store configuration data.
+TEXMFSYSCONFIG = $SELFAUTOPARENT/etc/texmf
+
+% Per-user texmf tree(s) -- organized per the TDS, as usual. To define
+% more than one per-user tree, set this to a list of directories in
+% braces, as described above. (This used to be HOMETEXMF.) ~ expands
+% to %USERPROFILE% on Windows, $HOME otherwise.
+TEXMFHOME = ~/texmf
+
+% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data.
+TEXMFVAR = ~/.texlive/texmf-var
+
+% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data.
+TEXMFCONFIG = ~/.texlive/texmf-config
+
+% List all the texmf trees.
+%
+% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named
+% explicitly and before all other trees.
+%
+% TEXMFLOCAL follows TEXMFMAIN (and precedes TEXMFDIST) because the
+% files in TEXMFMAIN are tightly coupled with the particular version of
+% the distribution, such as configuration files. Overriding them would
+% be more likely to cause trouble than help. On the other hand, the
+% bulk of packages and fonts are in TEXMFDIST, and locally-installed
+% versions should take precedence over those -- although it is generally
+% a source of confusion to have different versions of a package
+% installed, whatever the trees, so try to avoid it.
+TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFSITE,!!$TEXMFDIST}
+
+% Where to look for ls-R files. There need not be an ls-R in the
+% directories in this path, but if there is one, Kpathsea will use it.
+% By default, this is only the !! elements of TEXMF, so that mktexlsr
+% does not create ls-R files in the non-!! elements -- because if an
+% ls-R is present, it will be used, and the disk will not be searched.
+% This is arguably a bug in kpathsea.
+TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFSITE,!!$TEXMFDIST}
+
+% The system trees. These are the trees that are shared by all users.
+% If a tree appears in this list, the mktex* scripts will use
+% VARTEXFONTS for generated files, if the original tree isn't writable;
+% otherwise the current working directory is used.
+SYSTEXMF = $TEXMFSYSVAR;$TEXMFMAIN;$TEXMFLOCAL;$TEXMFSITE;$TEXMFDIST
+
+% We use GLOBALVARTEXFONTS in order to always be able to search in the global
+% font cache even if VARTEXFONTS is overridden.
+GLOBALVARTEXFONTS = $SELFAUTOPARENT/var/cache/fonts
+
+% Where generated fonts may be written. This tree is used when the sources
+% were found in a system tree and either that tree wasn't writable, or the
+% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
+VARTEXFONTS = $GLOBALVARTEXFONTS
+
+% On some systems, there will be a system tree which contains all the font
+% files that may be created as well as the formats. For example
+% TEXMFVAR = /var/lib/texmf
+% is used in many distros. In this case, set VARTEXFONTS like this
+%VARTEXFONTS = $TEXMFVAR/fonts
+% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR).
+%
+% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
+% one of the TEXMF directories (avoids overlapping ls-R files).
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Usually you will not need to edit any of the following variables.
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% WEB2C is for Web2C specific files. The current directory may not be
+% a good place to look for them.
+WEB2C = $TEXMF/web2c
+
+% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
+% or \openin, including .sty, .eps, etc. We specify paths for all known
+% formats, past or present. Not all of them are built these days.
+
+% Plain TeX. Have the command tex check all directories as a last
+% resort, we may have plain-compatible stuff anywhere.
+TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}//
+
+% Fontinst needs to read afm files.
+TEXINPUTS.fontinst = .;$TEXMF/{tex,fonts/afm}//
+
+% Other plain-based formats.
+TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}//
+TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.eplain = .;$TEXMF/tex/{eplain,plain,generic,}//
+TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}//
+TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
+
+% LaTeX 2e specific macros are stored in latex/, macros that can only be
+% used with 2.09 in latex209/. In addition, we look in the directory
+% latex209, useful for macros that were written for 2.09 and do not
+% mention 2e at all, but can be used with 2e.
+TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}//
+TEXINPUTS.olatex = .;$TEXMF/tex/{latex,generic,}//
+
+% MLTeX.
+TEXINPUTS.frlatex = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frtex = .;$TEXMF/tex/{french,plain,generic,}//
+TEXINPUTS.mllatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.mltex = .;$TEXMF/tex/{plain,generic,}//
+
+% e-TeX.
+TEXINPUTS.elatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.etex = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfTeX.
+TEXINPUTS.pdfcslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.pdfcsplain = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.pdflatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfmex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.utf8mex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.pdftex = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.pdftexinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
+TEXINPUTS.pdfamstex = .;$TEXMF/tex/{amstex,plain,generic,}//
+
+% pdfeTeX.
+TEXINPUTS.pdfelatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfetex = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfxTeX.
+TEXINPUTS.pdfxlatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfxmex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.pdfxtex = .;$TEXMF/tex/{plain,generic,}//
+
+% LuaTeX.
+TEXINPUTS.lualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+TEXINPUTS.luatex = .;$TEXMF/tex/{luatex,plain,generic,}//
+TEXINPUTS.dvilualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+TEXINPUTS.dviluatex = .;$TEXMF/tex/{luatex,plain,generic,}//
+
+% XeTeX.
+TEXINPUTS.xelatex = .;$TEXMF/tex/{xelatex,latex,xetex,generic,}//
+TEXINPUTS.xeplain = .;$TEXMF/tex/{xeplain,eplain,plain,xetex,generic,}//
+TEXINPUTS.xetex = .;$TEXMF/tex/{xetex,plain,generic,}//
+
+% Omega / Aleph.
+TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.elambda = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.eomega = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.lamed = .;$TEXMF/tex/{lamed,lambda,latex,generic,}//
+TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}//
+
+% p(La)TeX.
+TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
+TEXINPUTS.platex = .;$TEXMF/tex/{platex,ptexgeneric,latex,generic,}//
+
+% epTeX.
+TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
+
+% pBibTeX bibliographies and style files.
+BIBINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bib//
+BSTINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bst//
+
+% ConTeXt.
+TEXINPUTS.context = .;$TEXMF/tex/{context,plain,generic}//
+
+% jadetex.
+TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,latex,generic,}//
+TEXINPUTS.pdfjadetex = .;$TEXMF/tex/{jadetex,latex,generic,}//
+
+% XMLTeX.
+TEXINPUTS.xmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
+TEXINPUTS.pdfxmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
+
+% Miscellany, no longer built.
+TEXINPUTS.lamstex = .;$TEXMF/tex/{lamstex,plain,generic,}//
+TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}//
+TEXINPUTS.frpdflatex = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frpdftex = .;$TEXMF/tex/{french,plain,generic,}//
+
+% Earlier entries override later ones, so put this generic one last.
+TEXINPUTS = .;$TEXMF/tex/{$progname,generic,}//
+
+% ttf2tfm.
+TTF2TFMINPUTS = .;$TEXMF/ttf2pk//
+
+% Metafont, MetaPost inputs.
+MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/source//
+MPINPUTS = .;$TEXMF/metapost//
+
+% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read.
+% We want to find the engine-specific file, e.g., cont-en.fmt can
+% exist under both pdftex/ and xetex/. But just in case some formats
+% end up without an engine directory, look directly in web2c/ too.
+% We repeat the same definition three times because of the way fmtutil
+% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats
+% will not be found.
+TEXFORMATS = .;$TEXMF/web2c{/$engine,}
+MFBASES = .;$TEXMF/web2c{/$engine,}
+MPMEMS = .;$TEXMF/web2c{/$engine,}
+%
+% As of 2008, pool files don't exist any more (the strings are compiled
+% into the binaries), but just in case something expects to find these:
+TEXPOOL = .;$TEXMF/web2c
+MFPOOL = ${TEXPOOL}
+MPPOOL = ${TEXPOOL}
+
+% support the original xdvi. Must come before the generic settings.
+PKFONTS.XDvi = .;$TEXMF/%s;{$GLOBALVARTEXFONTS,$VARTEXFONTS}/pk/{%m,modeless}//
+VFFONTS.XDvi = .;$TEXMF/%s
+PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}//
+TEXPICTS.XDvi = .;$TEXMF/%q{dvips,tex}//
+
+% Device-independent font metric files.
+VFFONTS = .;$TEXMF/fonts/vf//
+TFMFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/tfm//
+
+% The $MAKETEX_MODE below means the drivers will not use a cx font when
+% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init
+% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual.
+% The modeless part guarantees that bitmaps for PostScript fonts are found.
+PKFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
+
+% Similarly for the GF format, which only remains in existence because
+% Metafont outputs it (and MF isn't going to change).
+GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//
+
+% A backup for PKFONTS and GFFONTS. Not used for anything.
+GLYPHFONTS = .;$TEXMF/fonts
+
+% A place to puth everything that doesn't fit the other font categories.
+MISCFONTS = .;$TEXMF/fonts/misc//
+
+% font name map files. This isn't just fonts/map// because ConTeXt
+% wants support for having files with the same name in the different
+% subdirs. Maybe if the programs ever get unified to accepting the same
+% map file syntax the definition can be simplified again.
+TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//
+
+% BibTeX bibliographies and style files. bibtex8 also uses these.
+BIBINPUTS = .;$TEXMF/bibtex/bib//
+BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}//
+
+% MlBibTeX.
+MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}//
+MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}//
+
+% MFT style files.
+MFTINPUTS = .;$TEXMF/mft//
+
+% PostScript headers and prologues (.pro); unfortunately, some programs
+% also use this for acessing font files (enc, type1, truetype)
+TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}//
+TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}//
+
+% OSFONTDIR is to provide a convenient hook for allowing TeX to find
+% fonts installed on the system (outside of TeX). An empty default
+% value would add "//" to the search paths, so we give it a dummy value.
+OSFONTDIR = /please/set/osfontdir/in/the/environment
+
+% PostScript Type 1 outline fonts.
+T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR//
+
+% PostScript AFM metric files.
+AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR//
+
+% TrueType outline fonts.
+TTFONTS = .;$TEXMF/fonts/{truetype,opentype}//;$OSFONTDIR//
+
+% OpenType outline fonts.
+OPENTYPEFONTS = .;$TEXMF/fonts/{opentype,truetype}//;$OSFONTDIR//
+
+% Type 42 outline fonts.
+T42FONTS = .;$TEXMF/fonts/type42//
+
+% Ligature definition files.
+LIGFONTS = .;$TEXMF/fonts/lig//
+
+% Dvips' config.* files (this name should not start with `TEX'!).
+TEXCONFIG = $TEXMF/dvips//
+
+% Makeindex style (.ist) files.
+INDEXSTYLE = .;$TEXMF/makeindex//
+
+% Font encoding files (.enc).
+ENCFONTS = .;$TEXMF/fonts/enc//
+
+% CMap files.
+CMAPFONTS = .;$TEXMF/fonts/cmap//
+
+% Subfont definition files.
+SFDFONTS = .;$TEXMF/fonts/sfd//
+
+% OpenType feature files (.fea).
+FONTFEATURES=.;$TEXMF/fonts/fea//
+
+% .cid and .cidmap
+FONTCIDMAPS=.;$TEXMF/fonts/cid//
+
+% pdftex config files:
+PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}//
+
+% Used by DMP (ditroff-to-mpx), called by makempx -troff.
+TRFONTS = $SELFAUTODIR{/local,}/share/groff/{current/font,site-font}/devps
+MPSUPPORT = .;$TEXMF/metapost/support
+
+% For xdvi to find mime.types and .mailcap, if they do not exist in
+% ~. These are single directories, not paths.
+% (But the default mime.types, at least, may well suffice.)
+MIMELIBDIR = $SELFAUTOPARENT/etc
+MAILCAPLIBDIR = $SELFAUTOPARENT/etc
+
+% Default settings for fontconfig library, used by Windows versions of
+% xetex/xdvipdfmx. On Unixish systems, fontconfig ignores this.
+FONTCONFIG_FILE=fonts.conf
+FONTCONFIG_PATH=$TEXMFSYSVAR/fonts/conf
+FC_CACHEDIR=$TEXMFSYSVAR/fonts/cache
+
+% TeX documentation and source files, for use with texdoc and kpsewhich.
+TEXDOCS = $TEXMF/doc//
+TEXSOURCES = .;$TEXMF/source//
+
+% Web and CWeb input paths.
+WEBINPUTS = .;$TEXMF/web//
+CWEBINPUTS = .;$TEXMF/cweb//
+
+% Omega-related fonts and other files.
+OFMFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/{ofm,tfm}//
+OPLFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/opl//
+OVFFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/{ovf,vf}//
+OVPFONTS = .;{$TEXMF/fonts,$GLOBALVARTEXFONTS,$VARTEXFONTS}/ovp//
+OTPINPUTS = .;$TEXMF/omega/otp//
+OCPINPUTS = .;$TEXMF/omega/ocp//
+
+% Some additional input variables for several programs. If you add
+% a program that uses the `other text files' or `other binary files'
+% search formats, you'll want to add their variables here as well.
+T4HTINPUTS = .;$TEXMF/tex4ht//
+
+%% t4ht utility, sharing files with TeX4ht
+TEX4HTFONTSET=alias,iso8859,unicode
+TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}//
+
+% TeXworks editor configuration and settings
+TW_LIBPATH = $TEXMFCONFIG/texworks
+TW_INIPATH = $TW_LIBPATH
+
+% For security, do not look in . for dvipdfmx.cfg, since the D option
+% would allow command execution.
+DVIPDFMXINPUTS = $TEXMF/dvipdfmx
+
+% Find scripts that are distributed/installed in the texmf tree.
+
+% Lua needs to look in TEXINPUTS for lua scripts distributed with packages.
+LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXINPUTS
+
+% Lua needs to look for binary lua libraries distributed with packages.
+CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua//
+
+% Architecture independent executables.
+TEXMFSCRIPTS = $TEXMF/scripts/{$progname,$engine,}//
+
+% Other languages.
+JAVAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/java//
+PERLINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/perl//
+PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python//
+RUBYINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/ruby//
+
+
+%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
+% KPSE_DOT = .
+
+% This definition isn't used from this .cnf file itself (that would be
+% paradoxical), but the compile-time default in paths.h is built from it.
+% The SELFAUTO* variables are set automatically from the location of
+% argv[0], in kpse_set_program_name.
+%
+% This main texmf.cnf file is installed, for a release YYYY, in a
+% directory such as /usr/local/texlive/YYYY/texmf/web2c/texmf.cnf.
+% Since this file is subject to future updates, the TeX Live installer
+% or human administrator may also create a file
+% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file
+% will take precedence over the distributed one under texmf/web2c.
+%
+% For security reasons, it is better not to include . in this path.
+%
+TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
+
+% kpathsea 3.5.3 and later sets these at runtime. To avoid empty
+% expansions from binaries linked against an earlier version of the
+% library, we set $progname and $engine to something non-empty:
+progname = unsetprogname
+engine = unsetengine
+
+
+
+
+% \f Part 2: Options.
+
+% If this option is set to true, `tex a.b' will look first for a.b.tex
+% (within each path element), and then for a.b, i.e., we try standard
+% extensions first. If this is false, we first look for a.b and then
+% a.b.tex, i.e., we try the name as-is first.
+%
+% Both names are always tried; the difference is the order in which they
+% are tried. The setting applies to all searches, not just .tex.
+%
+% This setting only affects names being looked up which *already* have
+% an extension. A name without an extension (e.g., `tex story') will
+% always have an extension added first.
+%
+% The default is true, because we already avoid adding the standard
+% extension(s) in the usual cases. E.g., babel.sty will only look for
+% babel.sty, not babel.sty.tex, regardless of this setting.
+try_std_extension_first = t
+
+% Enable system commands via \write18{...}. When enabled fully (set to
+% t), obviously insecure. When enabled partially (set to p), only the
+% commands listed in shell_escape_commands are allowed. Although this
+% is not fully secure either, it is much better, and so useful that we
+% enable it for everything but bare tex.
+shell_escape = p
+
+% No spaces in this command list.
+%
+% The programs listed here are as safe as any we know: they either do
+% not write any output files, respect openout_any, or have hard-coded
+% restrictions similar or higher to openout_any=p. They also have no
+% features to invoke arbitrary other programs, and no known exploitable
+% bugs. All to the best of our knowledge. They also have practical use
+% for being called from TeX.
+%
+shell_escape_commands = \
+bibtex,bibtex8,\
+kpsewhich,\
+makeindex,\
+repstopdf,\
+
+% we'd like to allow:
+% dvips - but external commands can be executed, need at least -R1.
+% epspdf, ps2pdf, pstopdf - need to respect openout_any,
+% and gs -dSAFER must be used and check for shell injection with filenames.
+% (img)convert (ImageMagick) - delegates.mgk possible misconfig, besides,
+% without Unix convert it hardly seems worth it, and Windows convert
+% is something completely different that destroys filesystems, so skip.
+% pygmentize - but is the filter feature insecure?
+% ps4pdf - but it calls an unrestricted latex.
+% rpdfcrop - maybe ok, but let's get experience with repstopdf first.
+% texindy,xindy - but is the module feature insecure?
+% ulqda - but requires optional SHA1.pm, so why bother.
+% tex, latex, etc. - need to forbid --shell-escape, and inherit openout_any.
+
+% plain TeX should remain unenhanced.
+shell_escape.tex = f
+shell_escape.initex = f
+
+% This is used by the Windows script wrapper for restricting searching
+% for the purportedly safe shell_escape_commands above to system
+% directories.
+TEXMF_RESTRICTED_SCRIPTS = \
+ {!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}/scripts/{$progname,$engine,}//
+
+% Allow TeX \openin, \openout, or \input on filenames starting with `.'
+% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
+% a (any) : any file can be opened.
+% r (restricted) : disallow opening "dotfiles".
+% p (paranoid) : as `r' and disallow going to parent directories, and
+% restrict absolute paths to be under $TEXMFOUTPUT.
+openout_any = p
+openin_any = a
+
+% Write .log/.dvi/etc. files here, if the current directory is unwritable.
+%TEXMFOUTPUT = /tmp
+
+% If a dynamic file creation fails, log the command to this file, in
+% either the current directory or TEXMFOUTPUT. Set to the
+% empty string or 0 to avoid logging.
+MISSFONT_LOG = missfont.log
+
+% Set to a colon-separated list of words specifying warnings to suppress.
+% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
+% TEX_HUSH = checksum:lostchar:readable:special
+% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
+TEX_HUSH = none
+
+% Allow TeX, and MF to parse the first line of an input file for
+% the %&format construct.
+parse_first_line = t
+
+% But don't parse the first line if invoked as "tex", since we want that
+% to remain Knuth-compatible. The src_specials and
+% file_line_error_style settings, as well as the options -enctex,
+% -mltex, -8bit, etc., also affect this, but they are all off by default.
+parse_first_line.tex = f
+parse_first_line.initex = f
+
+% Control file:line:error style messages.
+file_line_error_style = f
+
+% Enable the mktex... scripts by default? These must be set to 0 or 1.
+% Particular programs can and do override these settings, for example
+% dvips's -M option. Your first chance to specify whether the scripts
+% are invoked by default is at configure time.
+%
+% These values are ignored if the script names are changed; e.g., if you
+% set DVIPSMAKEPK to `foo', what counts is the value of the environment
+% variable/config value `FOO', not the `MKTEXPK' value.
+%
+%MKTEXTEX = 0
+%MKTEXPK = 0
+%MKTEXMF = 0
+%MKTEXTFM = 0
+%MKTEXFMT = 0
+%MKOCP = 0
+%MKOFM = 0
+
+% Used by makempx to run TeX. We use "etex" because MetaPost is
+% expecting DVI, and not "tex" because we want first line parsing.
+TEX = etex
+
+% These variables specify the external program called for the
+% interactive `e' option. %d is replaced by the line number and %s by
+% the current filename. The default is specified at compile-time, and
+% we let that stay in place since different platforms like different values.
+%TEXEDIT = vi +%d '%s' % default for Unix
+%TEXEDIT = texworks --position=+%d "%s" % default for Windows
+%MFEDIT = ${TEXEDIT}
+%MPEDIT = ${TEXEDIT}
+
+% The default `codepage and sort order' file for BibTeX8, when none is
+% given as command line option or environment variable.
+BIBTEX_CSFILE = 88591lat.csf
+
+% This variable is specific to Windows. It must be set to 0 or 1. The
+% default is 0. Setting it to 1 tells the Windows script wrappers to
+% use an already installed Perl interpreter if one is found on the
+% search path, in preference to the Perl shipped with TeX Live. Thus,
+% it may be useful if you both (a) installed a full Perl distribution
+% for general use, and (b) need to run Perl programs from TL that use
+% additional modules we don't provide. The TL Perl does provide all the
+% standard Perl modules.
+%
+%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0
+
+
+
+% \f Part 3: Array and other sizes for TeX (and Metafont).
+%
+% If you want to change some of these sizes only for a certain TeX
+% variant, the usual dot notation works, e.g.,
+% main_memory.hugetex = 20000000
+%
+% If a change here appears to be ignored, try redumping the format file.
+
+% Memory. Must be less than 8,000,000 total.
+%
+% main_memory is relevant only to initex, extra_mem_* only to non-ini.
+% Thus, have to redump the .fmt file after changing main_memory; to add
+% to existing fmt files, increase extra_mem_*. (To get an idea of how
+% much, try \tracingstats=2 in your TeX source file;
+% web2c/tests/memtest.tex might also be interesting.)
+%
+% To increase space for boxes (as might be needed by, e.g., PiCTeX),
+% increase extra_mem_bot.
+%
+% For some xy-pic samples, you may need as much as 700000 words of memory.
+% For the vast majority of documents, 60000 or less will do.
+%
+main_memory = 3000000 % words of inimemory available; also applies to inimf&mp
+extra_mem_top = 0 % extra high memory for chars, tokens, etc.
+extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc.
+
+% ConTeXt needs lots of memory.
+extra_mem_top.context = 2000000
+extra_mem_bot.context = 4000000
+
+% Words of font info for TeX (total size of all TFM files, approximately).
+% Must be >= 20000 and <= 147483647 (without tex.ch changes).
+font_mem_size = 3000000
+
+% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes).
+font_max = 9000
+
+% Extra space for the hash table of control sequences.
+hash_extra = 200000
+
+% Max number of characters in all strings, including all error messages,
+% help texts, font names, control sequences. These values apply to TeX.
+pool_size = 3250000
+% Minimum pool space after TeX's own strings; must be at least
+% 25000 less than pool_size, but doesn't need to be nearly that large.
+string_vacancies = 90000
+% Maximum number of strings.
+max_strings = 500000
+% min pool space left after loading .fmt
+pool_free = 47500
+
+% Buffer size. TeX uses the buffer to contain input lines, but macro
+% expansion works by writing material into the buffer and reparsing the
+% line. As a consequence, certain constructs require the buffer to be
+% very large, even though most documents can be handled with a small value.
+buf_size = 200000
+
+% Hyphenation trie. The maximum possible is 4194303 (ssup_trie_size in
+% the sources), but we don't need that much. The value here suffices
+% for all known free hyphenation patterns to be loaded simultaneously
+% (as TeX Live does).
+%
+trie_size = 1000000
+
+hyph_size = 8191 % prime number of hyphenation exceptions, >610, <32767.
+ % http://primes.utm.edu/curios/page.php/8191.html
+nest_size = 500 % simultaneous semantic levels (e.g., groups)
+max_in_open = 15 % simultaneous input files and error insertions,
+ % also applies to MetaPost
+param_size = 10000 % simultaneous macro parameters, also applies to MP
+save_size = 50000 % for saving values outside current group
+stack_size = 5000 % simultaneous input sources
+
+% These are Omega-specific.
+ocp_buf_size = 500000 % character buffers for ocp filters.
+ocp_stack_size = 10000 % stacks for ocp computations.
+ocp_list_size = 1000 % control for multiple ocps.
+
+% These work best if they are the same as the I/O buffer size, but it
+% doesn't matter much. Must be a multiple of 8.
+dvi_buf_size = 16384 % TeX
+gf_buf_size = 16384 % MF
+
+% It's probably inadvisable to change these. At any rate, we must have:
+% 45 < error_line < 255;
+% 30 < half_error_line < error_line - 15;
+% 60 <= max_print_line;
+% These apply to TeX, Metafont, and MetaPost.
+error_line = 79
+half_error_line = 50
+max_print_line = 79
+
+% Metafont only.
+screen_width.mf = 1664
+screen_depth.mf = 1200
+
+% BibTeX only (max_strings also determines hash_size and hash_prime).
+ent_str_size = 250
+glob_str_size = 5000
+max_strings.bibtex = 35307
+max_strings.bibtex8 = 35307
+max_strings.bibtexu = 35307
+max_strings.pbibtex = 35307
+
+% GFtype only.
+line_length.gftype = 500
+max_rows.gftype = 8191
+max_cols.gftype = 8191
--- /dev/null
+# Generated by /home/texlive/karl/Master/bin/i386-linux/tlmgr on Sun Oct 3 04:04:52 2010
+# $Id: updmap-hdr.cfg 11382 2008-11-20 18:59:26Z karl $
+#
+# The full updmap.cfg is generated by concatenating updmap-hdr.cfg with
+# all the Map and MixedMap lines from an installation, possibly
+# appending a local configuration file.
+#
+# To make local customizations to the map files, please use of the
+# following methods:
+#
+# 1) call
+# updmap-sys --enable Map=foo.map
+# for each map file. (Or MixedMap instead of Map, if your font has
+# both Metafont and outline definitions.) See the updmap --help
+# documentation.
+#
+# 2) add your local map entries to the file
+# TEXMFLOCAL/web2c/updmap-local.cfg
+# and then call
+# tlmgr generate updmap
+# which will concatenate updmap-local.cfg to the end of the final
+# updmap.cfg. (You can override the local.cfg file location with the
+# --localcfg option; see tlmgr --help.)
+#
+# If you use either of these methods, your local adaptations will be
+# preserved when tlmgr updates the installation or this config file.
+# Manual edits to updmap.cfg may be lost on update.
+
+
+################################################################
+# OPTIONS
+################################################################
+
+#
+# dvipsPreferOutline
+#
+# Should dvips (by default) prefer bitmap fonts or outline fonts
+# if both are available? Independent of this setting, outlines
+# can be forced by putting "p psfonts_t1.map" into a config file
+# that dvips reads. Bitmaps (for the fonts in question) can
+# be forced by putting "p psfonts_pk.map" into a config file.
+# We provide such config files which can be enabled via
+# dvips -Poutline ... resp. dvips -Ppk ...
+#
+# Valid settings for dvipsPreferOutline are true / false:
+dvipsPreferOutline true
+
+#
+# LW35
+#
+# Which fonts for the "Basic 35 Laserwriter Fonts" do you want to use and
+# how are the filenames chosen? Valid settings:
+# URW: URW fonts with "vendor" filenames (e.g. n019064l.pfb)
+# URWkb: URW fonts with "berry" filenames (e.g. uhvbo8ac.pfb)
+# ADOBE: Adobe fonts with "vendor" filenames (e.g. hvnbo___.pfb)
+# ADOBEkb: Adobe fonts with "berry" filenames (e.g. phvbo8an.pfb)
+LW35 URWkb
+
+#
+# dvipsDownloadBase35
+#
+# Should dvips (by default) download the standard 35 LaserWriter fonts
+# with the document (then set dvipsDownloadBase35 true) or should these
+# fonts be used from the ps interpreter / printer?
+# Whatever the default is, the user can override it by specifying
+# dvips -Pdownload35 ... resp. dvips -Pbuiltin35 ... to either download
+# the LW35 fonts resp. use the built-in fonts.
+#
+# Valid settings are true / false:
+dvipsDownloadBase35 false
+
+#
+# pdftexDownloadBase14
+#
+# Should pdftex download the base 14 pdf fonts? Since some configurations
+# (ps / pdf tools / printers) use bad default fonts, it is safer to download
+# the fonts. The pdf files will get bigger, though.
+# Valid settings are true (download the fonts) or false (don't download
+# the fonts). Adobe recommends embedding all fonts.
+pdftexDownloadBase14 true
+
+#
+# dvipdfmDownloadBase14
+#
+# Should dvipdfm download the base 14 pdf fonts? Since some configurations
+# (ps / pdf tools / printers) use bad default fonts, it is safer to download
+# the fonts. The pdf files will get bigger, though.
+# Valid settings are true (download the fonts) or false (don't download
+# the fonts).
+dvipdfmDownloadBase14 true
+
+################################################################
+# Map files.
+################################################################
+#
+# There are two possible entries: Map and MixedMap. Both have one additional
+# argument: the filename of the map file. MixedMap ("mixed" means that
+# the font is available as bitmap and as outline) lines will not be used
+# in the default map of dvips if dvipsPreferOutline is false. Inactive
+# Map files should be marked by "#! " (without the quotes), not just #.
+#
+
+#! Map OrnementsADF.map
+#! Map ArrowsADF.map
+#! Map BulletsADF.map
+#! MixedMap allrunes.map
+#! Map euler.map
+#! MixedMap cm.map
+#! MixedMap cmextra.map
+#! MixedMap cyrillic.map
+#! MixedMap latxfont.map
+#! MixedMap symbols.map
+#! Map uaq.map
+#! Map antt.map
+#! Map arabi.map
+#! MixedMap arabtex.map
+#! Map archaicprw.map
+#! Map arev.map
+#! Map bkaiu.map
+#! Map bsmiu.map
+#! Map gbsnu.map
+#! Map gkaiu.map
+#! Map ascii.map
+#! Map augie.map
+#! Map auncial.map
+#! Map aurical.map
+#! Map ybv.map
+#! Map belleek.map
+#! Map bera.map
+#! Map ybd.map
+#! Map pbsi.map
+#! Map burmese.map
+#! Map cmin.map
+#! MixedMap cbgreek-full.map
+#! MixedMap ccpl.map
+#! Map ccicons.map
+#! Map clm.map
+#! Map chemarrow.map
+#! Map cjhebrew.map
+#! MixedMap cmtext-bsr-interpolated.map
+#! Map cm-lgc.map
+#! MixedMap cm-super-t1.map
+#! MixedMap cm-super-t2a.map
+#! MixedMap cm-super-t2b.map
+#! MixedMap cm-super-t2c.map
+#! MixedMap cm-super-ts1.map
+#! MixedMap cm-super-x2.map
+#! Map cmcyr.map
+#! MixedMap cmll.map
+#! MixedMap csother.map
+#! MixedMap cstext.map
+#! Map cyklop.map
+#! Map dictsym.map
+#! Map dstroke.map
+#! Map yes.map
+#! Map epigrafica.map
+#! Map epiolmec.map
+#! MixedMap esint.map
+#! Map esvect.map
+#! MixedMap ethiop.map
+#! Map zpeu.map
+#! MixedMap eurosym.map
+#! Map fge.map
+#! Map foekfont.map
+#! Map fonetika.map
+#! Map fourier-utopia-expert.map
+#! Map fourier.map
+#! Map garuda-c90.map
+#! Map gfsartemisia.map
+#! Map gfsbaskerville.map
+#! Map gfsbodoni.map
+#! Map gfscomplutum.map
+#! Map gfsdidot.map
+#! Map gfsneohellenic.map
+#! Map gfsporson.map
+#! Map gfssolomos.map
+#! Map yfrak.map
+#! Map troff-updmap.map
+#! Map ugq.map
+#! Map grverb.map
+#! MixedMap hfbright.map
+#! MixedMap iby.map
+#! Map fi4.map
+#! Map Acorn.map
+#! Map AnnSton.map
+#! Map ArtNouv.map
+#! Map ArtNouvc.map
+#! Map Carrickc.map
+#! Map Eichenla.map
+#! Map Eileen.map
+#! Map EileenBl.map
+#! Map Elzevier.map
+#! Map GotIn.map
+#! Map GoudyIn.map
+#! Map Kinigcap.map
+#! Map Konanur.map
+#! Map Kramer.map
+#! Map MorrisIn.map
+#! Map Nouveaud.map
+#! Map Romantik.map
+#! Map Rothdn.map
+#! Map RoyalIn.map
+#! Map Sanremo.map
+#! Map Starburst.map
+#! Map Typocaps.map
+#! Map Zallman.map
+#! Map iwona.map
+#! Map kerkis.map
+#! Map knitfont.map
+#! Map kpfonts.map
+#! Map kurier.map
+#! Map libertine.map
+#! Map yly.map
+#! Map linearA.map
+#! Map l7x-urwvn.map
+#! Map lm.map
+#! MixedMap lxfonts.map
+#! MixedMap manfnt.map
+#! Map marvosym.map
+#! Map mdbch.map
+#! Map mdput.map
+#! Map mdugm.map
+#! MixedMap mflogo.map
+#! Map MnSymbol.map
+#! MixedMap mongolian.map
+#! MixedMap musix.map
+#! Map norasi-c90.map
+#! Map cherokee.map
+#! Map oinuit.map
+#! Map omega.map
+#! Map phaistos.map
+#! MixedMap pigpen.map
+#! MixedMap plother.map
+#! MixedMap pltext.map
+#! Map ap.map
+#! Map charter.map
+#! Map fpls.map
+#! Map pazo.map
+#! Map utopia.map
+#! Map pxfonts.map
+#! Map recycle.map
+#! Map yrd.map
+#! MixedMap rsfs.map
+#! Map skt.map
+#! MixedMap semaf.map
+#! Map SkakNew.map
+#! Map starfont.map
+#! Map icelandic.map
+#! MixedMap stmaryrd.map
+#! Map tabvar.map
+#! Map qag.map
+#! Map qbk.map
+#! Map qcr.map
+#! Map qcs.map
+#! Map qhv.map
+#! Map qpl.map
+#! Map qtm.map
+#! Map qzc.map
+#! MixedMap tipa.map
+#! MixedMap trajan.map
+#! Map txfonts.map
+#! Map gptimes.map
+#! Map umj.map
+#! MixedMap dvng.map
+#! Map yv1.map
+#! Map yv2.map
+#! Map yv3.map
+#! Map yvo.map
+#! Map yvt.map
+#! Map arevvn.map
+#! Map chartervn.map
+#! Map cmbrightvn.map
+#! Map concretevn.map
+#! Map grotesqvn.map
+#! Map txttvn.map
+#! Map urwvn.map
+#! MixedMap vnrother.map
+#! MixedMap vnrtext.map
+#! Map vntopia.map
+#! Map dgj.map
+#! Map dmj.map
+#! Map mc2j.map
+#! Map mcj.map
+#! Map mr2j.map
+#! Map mrj.map
+#! MixedMap wasy.map
+#! MixedMap xypic.map
+#! MixedMap yhmath.map
+#! Map slantcm.map
+Map euler.map
+MixedMap cmextra.map
+MixedMap cm.map
+MixedMap cyrillic.map
+MixedMap latxfont.map
+MixedMap symbols.map
+MixedMap cmtext-bsr-interpolated.map
+MixedMap mflogo.map
+MixedMap cm-super-t1.map
+MixedMap cm-super-t2a.map
+MixedMap cm-super-t2b.map
+MixedMap cm-super-t2c.map
+MixedMap cm-super-ts1.map
+MixedMap cm-super-x2.map
+Map zpeu.map
+MixedMap eurosym.map
+Map lm.map
+Map marvosym.map
+Map pxfonts.map
+MixedMap rsfs.map
+Map qag.map
+Map qbk.map
+Map qcr.map
+Map qcs.map
+Map qhv.map
+Map qpl.map
+Map qtm.map
+Map qzc.map
+MixedMap tipa.map
+Map txfonts.map
+MixedMap wasy.map
+Map charter.map
+Map fpls.map
+Map pazo.map
+Map utopia.map
--- /dev/null
+# This file was automatically generated by the /lib64/udev/write_net_rules
+# program, run by the persistent-net-generator.rules rules file.
+#
+# You can modify it, as long as you keep each rule on a single
+# line, and change only the value of the NAME= key.
+
+# PCI device 0x8086:0x109a (e1000e)
+SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="40:61:86:ee:e4:64", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
+
+# PCI device 0x8086:0x109a (e1000e)
+SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="40:61:86:ee:e4:65", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
--- /dev/null
+# The initial syslog(3) priority: "err", "info", "debug" or its
+# numerical equivalent. For runtime debugging, the daemons internal
+# state can be changed with: "udevadm control --log-priority=<value>".
+udev_log="err"
+# If you need to change mount-options, do it in /etc/fstab
--- /dev/null
+# /etc/vhosts/webapp-config
+# Some default variables that are shared between the
+# webapp-config utility, and the webapp eclass
+#
+# Part of the Gentoo Linux distribution
+#
+# Copyright (c) 1999-2005 Gentoo Foundation
+# Released under v2 of the GNU GPL
+#
+# Author(s) Stuart Herbert <stuart@gentoo.org>
+# Renat Lumpau <rl03@gentoo.org>
+# Gunnar Wrobel <php@gunnarwrobel.de>
+#
+# ========================================================================
+
+# ========================================================================
+#
+# USER-EDITABLE SETTINGS
+#
+# Feel free to edit these settings to suit your local needs
+#
+# ========================================================================
+
+# vhost_root is the directory where virtual host websites are added
+# so, if your server is hosting (say)
+#
+# www.gentoo.org
+# bugs.gentoo.org
+#
+# then the htdocs directory for each of these would be
+#
+# /var/www/www.gentoo.org/htdocs
+# /var/www/bugs.gentoo.org/htdocs
+#
+# Change this setting *only* if you need your websites installed in
+# a different physical location
+#
+# If you prefer to use Gentoo's optional support for the /srv service
+# home file hierarchy, uncomment the second version of vhost_root
+# (this should have been done for you if you installed webapp-config
+# with the srvdir USE flag enabled)
+# If you want to have fine grained control over the location the web
+# applications get installed, you can use the third setting
+
+vhost_root="/var/www/${vhost_hostname}"
+#vhost_root="/srv/${vhost_hostname}/www"
+#vhost_root="/var/www/${vhost_subdomain_1}/${vhost_subdomain_2}/${vhost_subdomain_3}"
+
+# some web applications need to know what host they are serving up pages
+# for. this information is configured when the application is installed
+# by the webapp-config script
+#
+# changing this value *after* the application has been installed has
+# no effect!!
+#
+# you can override this setting by using the -h switch to webapp-config
+#
+# IMPORTANT: If you comment this setting and provide no explicit hostname
+# with the command line -h switch, webapp-config will try to determine
+# the fully qualified domain name by itself
+
+vhost_hostname="localhost"
+
+# what web server are you using?
+# your choices are:
+#
+# apache
+# aolserver
+# lighttpd
+# cherokee
+#
+# you can override this setting by using the -s switch to webapp-config
+
+vhost_server="apache"
+
+# which user should own config files?
+# the default is the user currently running webapp-config (which is
+# normally the root user). You may either use the numerical uid or the
+# user name. The internal default is "0" to accomodate for BSD style
+# systems.
+#
+# you can override this setting by using the -u switch to webapp-config
+
+#vhost_config_uid="root"
+
+# which group should own config files?
+# the default is the group of the user currently running webapp-config
+# (which is normally the root group). You may either use the numerical
+# gid or the group name. The internal default is "0" to accomodate for
+# BSD style systems.
+#
+# you can override this setting by using the -g switch to webapp-config
+
+#vhost_config_gid="root"
+
+# what type of shared directories should be created?
+# the default is 'default-owned', which means that each install of the app
+# gets a copy of the directory
+#
+# permitted values are: server-owned, config-owned, default-owned
+#
+# you can override this setting by using the --default-dirs switch to
+# webapp-config
+
+vhost_config_default_dirs="default-owned"
+
+# what type of shared files should be created?
+# the default is 'virtual', which means that each install of the app
+# does NOT get a unique copy of the files
+#
+# permitted values are: server-owned, config-owned, virtual
+#
+# you can override this setting by using the --virtual-files switch to
+# webapp-config
+
+vhost_config_virtual_files="virtual"
+
+# where should drop-in config files for webservers go?
+#
+# these files will be called <server>-<app>.conf. They are quite rare,
+# but are needed from time to time by the odd application or two
+
+vhost_config_dir="${vhost_root}/conf"
+
+# which user & group should own the files by default?
+#
+# the default is for files to be owned by the superuser root, so that
+# they cannot be tampered with by other users
+#
+# this setting affects the files and directories installed by the ebuild,
+# and it affects some directories created by webapp-config. It does not
+# affect any of the files installed by webapp-config at this time.
+
+vhost_default_uid="root"
+vhost_default_gid="root"
+
+# what type of links do you want to use?
+#
+# starting with webapp-config v1.10, the default behaviour is to attempt
+# to hardlink a file from /usr/share/webapps/* first. If the hardlink
+# fails (normally because /usr and /var | /srv are on different filesystems)
+# webapp-config will fall back to making a physical copy of the file
+# instead
+#
+# NOTE:
+# we have moved to hardlinks because not all web-based packages work
+# when their files are symlinked in
+#
+# please do not raise bugs about packages that do not work when
+# symlinked
+#
+# vhost_link_type="soft"
+
+# what are the names of your document directories?
+#
+# by default, your website lives in /var/www/<hostname>/htdocs. If you
+# run webapp-config with the --secure switch, your website instead lives
+# in /var/www/<hostname>/htdocs-secure.
+#
+# you can change the default names of 'htdocs' and 'htdocs-secure' by
+# editing these two variables
+
+vhost_htdocs_insecure="htdocs"
+vhost_htdocs_secure="htdocs-secure"
+
+# what permissions do you want the files to have?
+#
+# by default, webapp-config installs directories and files with these
+# permissions. You can change them here to comply with your local
+# security policies.
+# You need to specify octal values ("0nnn") or you can use the encoding
+# used by chmod ("[ugoa]{1,3}[+-=]{rwx]{1,3}" elements as a comma
+# seperated list)
+
+vhost_perms_serverowned_dir="0775"
+vhost_perms_serverowned_file="0664"
+
+vhost_perms_configowned_dir="0755"
+vhost_perms_configowned_file="0644"
+
+vhost_perms_defaultowned_dir="0755"
+vhost_perms_virtualowned_file="o-w"
+
+vhost_perms_installdir="0755"
+
+
+# ========================================================================
+# END OF USER-EDITABLE SETTINGS
+# ========================================================================
+
+# ========================================================================
+# EDIT THE VARIABLES BELOW THIS LINE AT YOUR OWN RISK
+#
+# These variables are used by the webapp.eclass component of Portage,
+# and by /usr/sbin/webapp-config.
+#
+# If you break your Gentoo installation by changing these settings, then
+# re-emerge the webapps-config package to restore the default values
+#
+# When webapp-config is upgraded, it may add to and/or change the value of
+# variables listed here. If you do not merge in these changes, you will
+# probably find that webapp-config will break in horrible ways.
+#
+# etc-update is NOT optional ;-)
+#
+# ========================================================================
+
+# which version of webapp-config is this file for?
+#
+# we have a problem when users upgrade webapp-config. It turns out that
+# they don't explicitly upgrade webapp-config ... instead, webapp-config
+# gets because it is a dependency for a web-based package.
+#
+# unfortunately, this means that any changes to this config file do not
+# get installed (through etc-update or equivalent) until after the web-
+# based package has been installed. We end up trying to install the
+# package using a partial install of webapp-config
+#
+# how can we work around this?
+#
+# the only way to work around this is to put some sort of version-control
+# marker in this config file. webapp-config and this file must agree on
+# what this marker is, otherwise webapp-config will refuse to work
+
+WA_CONF_VERSION="7"
+
+# ========================================================================
+# END OF CONFIG FILE
+# ========================================================================
--- /dev/null
+scriptencoding utf-8
+" ^^ Please leave the above line at the start of the file.
+
+" Default configuration file for Vim
+" $Header: /var/cvsroot/gentoo-x86/app-editors/vim-core/files/vimrc-r4,v 1.3 2010/04/15 19:30:32 darkside Exp $
+
+" Written by Aron Griffis <agriffis@gentoo.org>
+" Modified by Ryan Phillips <rphillips@gentoo.org>
+" Modified some more by Ciaran McCreesh <ciaranm@gentoo.org>
+" Added Redhat's vimrc info by Seemant Kulleen <seemant@gentoo.org>
+
+" You can override any of these settings on a global basis via the
+" "/etc/vim/vimrc.local" file, and on a per-user basis via "~/.vimrc". You may
+" need to create these.
+
+" {{{ General settings
+" The following are some sensible defaults for Vim for most users.
+" We attempt to change as little as possible from Vim's defaults,
+" deviating only where it makes sense
+set nocompatible " Use Vim defaults (much better!)
+set bs=2 " Allow backspacing over everything in insert mode
+set ai " Always set auto-indenting on
+set history=50 " keep 50 lines of command history
+set ruler " Show the cursor position all the time
+
+set viminfo='20,\"500 " Keep a .viminfo file.
+
+" Don't use Ex mode, use Q for formatting
+map Q gq
+
+" When doing tab completion, give the following files lower priority. You may
+" wish to set 'wildignore' to completely ignore files, and 'wildmenu' to enable
+" enhanced tab completion. These can be done in the user vimrc file.
+set suffixes+=.info,.aux,.log,.dvi,.bbl,.out,.o,.lo
+
+" When displaying line numbers, don't use an annoyingly wide number column. This
+" doesn't enable line numbers -- :set number will do that. The value given is a
+" minimum width to use for the number column, not a fixed size.
+if v:version >= 700
+ set numberwidth=3
+endif
+" }}}
+
+" {{{ Modeline settings
+" We don't allow modelines by default. See bug #14088 and bug #73715.
+" If you're not concerned about these, you can enable them on a per-user
+" basis by adding "set modeline" to your ~/.vimrc file.
+set nomodeline
+" }}}
+
+" {{{ Locale settings
+" Try to come up with some nice sane GUI fonts. Also try to set a sensible
+" value for fileencodings based upon locale. These can all be overridden in
+" the user vimrc file.
+if v:lang =~? "^ko"
+ set fileencodings=euc-kr
+ set guifontset=-*-*-medium-r-normal--16-*-*-*-*-*-*-*
+elseif v:lang =~? "^ja_JP"
+ set fileencodings=euc-jp
+ set guifontset=-misc-fixed-medium-r-normal--14-*-*-*-*-*-*-*
+elseif v:lang =~? "^zh_TW"
+ set fileencodings=big5
+ set guifontset=-sony-fixed-medium-r-normal--16-150-75-75-c-80-iso8859-1,-taipei-fixed-medium-r-normal--16-150-75-75-c-160-big5-0
+elseif v:lang =~? "^zh_CN"
+ set fileencodings=gb2312
+ set guifontset=*-r-*
+endif
+
+" If we have a BOM, always honour that rather than trying to guess.
+if &fileencodings !~? "ucs-bom"
+ set fileencodings^=ucs-bom
+endif
+
+" Always check for UTF-8 when trying to determine encodings.
+if &fileencodings !~? "utf-8"
+ " If we have to add this, the default encoding is not Unicode.
+ " We use this fact later to revert to the default encoding in plaintext/empty
+ " files.
+ let g:added_fenc_utf8 = 1
+ set fileencodings+=utf-8
+endif
+
+" Make sure we have a sane fallback for encoding detection
+if &fileencodings !~? "default"
+ set fileencodings+=default
+endif
+" }}}
+
+" {{{ Syntax highlighting settings
+" Switch syntax highlighting on, when the terminal has colors
+" Also switch on highlighting the last used search pattern.
+if &t_Co > 2 || has("gui_running")
+ syntax on
+ set hlsearch
+endif
+" }}}
+
+" {{{ Terminal fixes
+if &term ==? "xterm"
+ set t_Sb=^[4%dm
+ set t_Sf=^[3%dm
+ set ttymouse=xterm2
+endif
+
+if &term ==? "gnome" && has("eval")
+ " Set useful keys that vim doesn't discover via termcap but are in the
+ " builtin xterm termcap. See bug #122562. We use exec to avoid having to
+ " include raw escapes in the file.
+ exec "set <C-Left>=\eO5D"
+ exec "set <C-Right>=\eO5C"
+endif
+" }}}
+
+" {{{ Filetype plugin settings
+" Enable plugin-provided filetype settings, but only if the ftplugin
+" directory exists (which it won't on livecds, for example).
+if isdirectory(expand("$VIMRUNTIME/ftplugin"))
+ filetype plugin on
+
+ " Uncomment the next line (or copy to your ~/.vimrc) for plugin-provided
+ " indent settings. Some people don't like these, so we won't turn them on by
+ " default.
+ " filetype indent on
+endif
+" }}}
+
+" {{{ Fix &shell, see bug #101665.
+if "" == &shell
+ if executable("/bin/bash")
+ set shell=/bin/bash
+ elseif executable("/bin/sh")
+ set shell=/bin/sh
+ endif
+endif
+"}}}
+
+" {{{ Our default /bin/sh is bash, not ksh, so syntax highlighting for .sh
+" files should default to bash. See :help sh-syntax and bug #101819.
+if has("eval")
+ let is_bash=1
+endif
+" }}}
+
+" {{{ Autocommands
+if has("autocmd")
+
+augroup gentoo
+ au!
+
+ " Gentoo-specific settings for ebuilds. These are the federally-mandated
+ " required tab settings. See the following for more information:
+ " http://www.gentoo.org/proj/en/devrel/handbook/handbook.xml
+ " Note that the rules below are very minimal and don't cover everything.
+ " Better to emerge app-vim/gentoo-syntax, which provides full syntax,
+ " filetype and indent settings for all things Gentoo.
+ au BufRead,BufNewFile *.e{build,class} let is_bash=1|setfiletype sh
+ au BufRead,BufNewFile *.e{build,class} set ts=4 sw=4 noexpandtab
+
+ " In text files, limit the width of text to 78 characters, but be careful
+ " that we don't override the user's setting.
+ autocmd BufNewFile,BufRead *.txt
+ \ if &tw == 0 && ! exists("g:leave_my_textwidth_alone") |
+ \ setlocal textwidth=78 |
+ \ endif
+
+ " When editing a file, always jump to the last cursor position
+ autocmd BufReadPost *
+ \ if ! exists("g:leave_my_cursor_position_alone") |
+ \ if line("'\"") > 0 && line ("'\"") <= line("$") |
+ \ exe "normal g'\"" |
+ \ endif |
+ \ endif
+
+ " When editing a crontab file, set backupcopy to yes rather than auto. See
+ " :help crontab and bug #53437.
+ autocmd FileType crontab set backupcopy=yes
+
+ " If we previously detected that the default encoding is not UTF-8
+ " (g:added_fenc_utf8), assume that a file with only ASCII characters (or no
+ " characters at all) isn't a Unicode file, but is in the default encoding.
+ " Except of course if a byte-order mark is in effect.
+ autocmd BufReadPost *
+ \ if exists("g:added_fenc_utf8") && &fileencoding == "utf-8" &&
+ \ ! &bomb && search('[\x80-\xFF]','nw') == 0 && &modifiable |
+ \ set fileencoding= |
+ \ endif
+
+augroup END
+
+endif " has("autocmd")
+" }}}
+
+" {{{ vimrc.local
+if filereadable("/etc/vim/vimrc.local")
+ source /etc/vim/vimrc.local
+endif
+" }}}
+
+" vim: set fenc=utf-8 tw=80 sw=2 sts=2 et foldmethod=marker :
+
--- /dev/null
+set noai
+set nohlsearch
+set fo="tcq"
+set modeline
+set showmatch
+
+if has("multi_byte")
+ set encoding=utf-8
+ setglobal fileencoding=utf-8
+" set bomb
+" set termencoding=iso-8859-15
+" set fileencodings=ucs-bom,iso-8859-15,iso-8859-3,utf-8
+else
+ echoerr "Sorry, this version of (g)vim was not compiled with +multi_byte"
+endif
+
+
+filetype plugin off
+:runtime! ftplugin/man.vim
+
+color delek
+
--- /dev/null
+service cvspserver
+{
+ disable = yes
+ socket_type = stream
+ wait = no
+ user = root
+ log_type = FILE /var/log/cvspserver
+ protocol = tcp
+ env = HOME=/var/cvsroot
+ log_on_failure += USERID
+ port = 2401
+ server = /usr/bin/cvs
+ server_args = -f --allow-root=/var/cvsroot pserver
+}
--- /dev/null
+service rsync
+{
+ socket_type = stream
+ protocol = tcp
+ wait = no
+ user = root
+ server = /usr/bin/rsync
+ server_args = --daemon
+ disable = yes
+}
--- /dev/null
+service svn
+{
+ socket_type = stream
+ wait = no
+ user = apache
+ group = apache
+ umask = 002
+ protocol = tcp
+ log_on_failure += USERID HOST
+ port = 3690
+ server = /usr/bin/svnserve
+ server_args = -i
+ disable = yes
+}
--- /dev/null
+<?xml version="1.0"?>
+<!DOCTYPE catalog PUBLIC "-//OASIS//DTD Entity Resolution XML Catalog V1.0//EN" "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd">
+<catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
+ <public publicId="-//OMF//DTD Scrollkeeper OMF Variant V1.0//EN" uri="/usr/share/xml/scrollkeeper/dtds/scrollkeeper-omf.dtd"/>
+ <system systemId="http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd" uri="/usr/share/xml/scrollkeeper/dtds/scrollkeeper-omf.dtd"/>
+ <system systemId="http://glade.gnome.org/glade-2.0.dtd" uri="/usr/share/xml/libglade/glade-2.0.dtd"/>
+ <delegatePublic publicIdStartString="-//OASIS//ENTITIES DocBook XML" catalog="file:///etc/xml/docbook"/>
+ <delegatePublic publicIdStartString="-//OASIS//DTD DocBook XML" catalog="file:///etc/xml/docbook"/>
+ <delegateSystem systemIdStartString="http://www.oasis-open.org/docbook/" catalog="file:///etc/xml/docbook"/>
+ <delegateURI uriStartString="http://www.oasis-open.org/docbook/" catalog="file:///etc/xml/docbook"/>
+ <delegatePublic publicIdStartString="ISO 8879:1986" catalog="file:///etc/xml/docbook"/>
+ <delegateSystem systemIdStartString="http://docbook.sourceforge.net/release/xsl/" catalog="file:///etc/xml/docbook"/>
+ <delegateURI uriStartString="http://docbook.sourceforge.net/release/xsl/" catalog="file:///etc/xml/docbook"/>
+</catalog>
--- /dev/null
+<?xml version="1.0"?>
+<!DOCTYPE catalog PUBLIC "-//OASIS//DTD Entity Resolution XML Catalog V1.0//EN" "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd">
+<catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
+ <rewriteSystem systemIdStartString="http://docbook.sourceforge.net/release/xsl/current" rewritePrefix="file:///usr/share/sgml/docbook/xsl-stylesheets"/>
+ <rewriteURI uriStartString="http://docbook.sourceforge.net/release/xsl/current" rewritePrefix="file:///usr/share/sgml/docbook/xsl-stylesheets"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Information Pool V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbpoolx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/docbookx.dtd"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Character Entities V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbcentx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Notations V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbnotnx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Additional General Entities V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbgenent.mod"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Document Hierarchy V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/dbhierx.mod"/>
+ <public publicId="-//OASIS//DTD XML Exchange Table Model 19990315//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/soextblx.dtd"/>
+ <public publicId="-//OASIS//DTD DocBook XML CALS Table Model V4.3//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/calstblx.dtd"/>
+ <rewriteSystem systemIdStartString="http://www.oasis-open.org/docbook/xml/4.3" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.3"/>
+ <rewriteURI uriStartString="http://www.oasis-open.org/docbook/xml/4.3" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.3"/>
+ <public publicId="ISO 8879:1986//ENTITIES Added Math Symbols: Arrow Relations//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-amsa.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Added Math Symbols: Binary Operators//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-amsb.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Added Math Symbols: Delimiters//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-amsc.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Added Math Symbols: Negated Relations//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-amsn.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Added Math Symbols: Ordinary//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-amso.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Added Math Symbols: Relations//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-amsr.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Box and Line Drawing//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-box.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Russian Cyrillic//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-cyr1.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Non-Russian Cyrillic//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-cyr2.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Diacritical Marks//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-dia.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Greek Letters//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-grk1.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Monotoniko Greek//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-grk2.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Greek Symbols//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-grk3.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Alternative Greek Symbols//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-grk4.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Added Latin 1//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-lat1.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Added Latin 2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-lat2.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Numeric and Special Graphic//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-num.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES Publishing//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-pub.ent"/>
+ <public publicId="ISO 8879:1986//ENTITIES General Technical//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.3/ent/iso-tech.ent"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Information Pool V4.1.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.1.2/dbpoolx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML V4.1.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.1.2/docbookx.dtd"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Character Entities V4.1.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.1.2/dbcentx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Notations V4.1.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.1.2/dbnotnx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Additional General Entities V4.1.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.1.2/dbgenent.mod"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Document Hierarchy V4.1.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.1.2/dbhierx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML CALS Table Model V4.1.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.1.2/calstblx.dtd"/>
+ <rewriteSystem systemIdStartString="http://www.oasis-open.org/docbook/xml/4.1.2" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.1.2"/>
+ <rewriteURI uriStartString="http://www.oasis-open.org/docbook/xml/4.1.2" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.1.2"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Information Pool V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbpoolx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/docbookx.dtd"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Character Entities V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbcentx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Notations V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbnotnx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Additional General Entities V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbgenent.mod"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Document Hierarchy V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/dbhierx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML CALS Table Model V4.2//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.2/calstblx.dtd"/>
+ <rewriteSystem systemIdStartString="http://www.oasis-open.org/docbook/xml/4.2" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.2"/>
+ <rewriteURI uriStartString="http://www.oasis-open.org/docbook/xml/4.2" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.2"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Information Pool V4.4//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.4/dbpoolx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML V4.4//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.4/docbookx.dtd"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Character Entities V4.4//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.4/dbcentx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Notations V4.4//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.4/dbnotnx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Additional General Entities V4.4//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.4/dbgenent.mod"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Document Hierarchy V4.4//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.4/dbhierx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML CALS Table Model V4.4//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.4/calstblx.dtd"/>
+ <rewriteSystem systemIdStartString="http://www.oasis-open.org/docbook/xml/4.4" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.4"/>
+ <rewriteURI uriStartString="http://www.oasis-open.org/docbook/xml/4.4" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.4"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Information Pool V4.5//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.5/dbpoolx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML V4.5//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.5/docbookx.dtd"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Character Entities V4.5//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.5/dbcentx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Notations V4.5//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.5/dbnotnx.mod"/>
+ <public publicId="-//OASIS//ENTITIES DocBook XML Additional General Entities V4.5//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.5/dbgenent.mod"/>
+ <public publicId="-//OASIS//ELEMENTS DocBook XML Document Hierarchy V4.5//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.5/dbhierx.mod"/>
+ <public publicId="-//OASIS//DTD DocBook XML CALS Table Model V4.5//EN" uri="file:///usr/share/sgml/docbook/xml-dtd-4.5/calstblx.dtd"/>
+ <rewriteSystem systemIdStartString="http://www.oasis-open.org/docbook/xml/4.5" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.5"/>
+ <rewriteURI uriStartString="http://www.oasis-open.org/docbook/xml/4.5" rewritePrefix="file:///usr/share/sgml/docbook/xml-dtd-4.5"/>
+</catalog>
projects / config / helga / etc.git / commitdiff