+++ /dev/null
-##
-## ChkTeX, example resource file for ChkTeX.
-## Copyright (C) 1995-96 Jens T. Berger Thielemann
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-##
-## Contact the author at:
-## Jens Berger
-## Spektrumvn. 4
-## N-0666 Oslo
-## Norway
-## E-mail: <jensthi@ifi.uio.no>
-##
-
-#####################################################################
-#
-# Note: The format has changed slightly (again). The { ... }
-# syntax does now mean case-sensitive comparing, while [ ... ] means
-# case-insensitive comparing of the keywords. Case-insensitive
-# comparing of the keywords is only supported on a few of the
-# keywords (it's not meaningful in all contexts, and it slows ChkTeX
-# down). Keywords supporting this are marked throughout the file.
-#
-# You may also reset a list by saying "KEYWORD = { ... }"; it will
-# then be set equal to the contents of the list you specify.
-#
-# Comments begin with `#', and continues for the rest of the line.
-# Blank lines plus leading and trailing spaces are of course ignored.
-#
-# The general format of this file is the following:
-#
-# KEYWORD { item item ...} [ item item ... ] /* Adds items */
-#
-# KEYWORD [ item item ...] { item item ... } /* Adds items */
-#
-# KEYWORD = item
-#
-# KEYWORD = { item item ... } /* Clears list before adding */
-#
-# KEYWORD = [ item item ... ] /* Clears list before adding */
-#
-# This does _not_ mean that you may alternate the forms; certain
-# keywords demands a list, other a single value. You thus have to
-# look at the examples of their use.
-#
-# Please also note that if you specify a list-keyword twice, we'll
-# concatenate the lists. If you specify a item-keyword twice, we'll
-# kill the previous value.
-#
-# We are slightly context-sensitive when detecting tokens like "}"
-# and "]"; they have to be preceded by a space. This generally makes
-# life easier.
-#
-# Items are separated by spaces. Newlines are considered as spaces,
-# but can't be escaped. You may surround items with quotes (`"') to
-# easily put spaces into them.
-#
-# Escape sequences available:
-#
-# Sequence Resulting character
-# ! A space (type `! ', not just a exclamation mark)
-# !" "
-# !# #
-# !! !
-# !{ {
-# !} }
-# ![ [
-# !] ]
-# != =
-# !b Backspace
-# !n New line
-# !r Carriage return
-# !t Tab
-# !f Form feed
-# !xNN NN must be a hexadecimal number (00 - ff),
-# _both_ characters must be included.
-# !dNNN DDD must be a decimal number (000 - 255), all
-# three characters must be included. Unspecified
-# results if DDD > 255.
-# !NNN DDD must be a octal number (000 - 377), all
-# three characters must be included. Unspecified
-# results if DDD > 377.
-#
-# Minor note: As you can see, most of these escape sequences are
-# equal to those in C (with some extensions); however, we use !
-# instead of \ as escape character for obvious reasons.
-#
-#
-# Quick summary of keywords follows. Keywords marked with a * accept
-# keywords accepting case-insensitive lists.
-#
-# Abbrev* - A list of abbreviations not automatically caught.
-# CenterDots - Commands/characters which should have \cdots in
-# between.
-# CmdLine - Default commandline options. These will be
-# processed before the ones you give on the command
-# line.
-# HyphDash \
-# NumDash - Number of dashes allowed in different contexts.
-# WordDash /
-# IJAccent - Commands which puts an accent _over_ their
-# argument.
-# Italic - Commands immediately turning on italic mode.
-# ItalCmd - Commands putting their argument into italic.
-# Linker - Commands which should have a non-breaking space in
-# front.
-# LowDots - Commands/characters which should have \ldots in
-# between.
-# MathEnvir - Environments which turn on math mode.
-# MathCmd - Commands which turn on math mode.
-# TextCmd - Commands which turn off math mode.
-# MathRoman - Mathematical operators with LaTeX replacement
-# defined.
-# NoCharNext - Insists on that certain commands aren't followed by
-# certain characters.
-# NonItalic - Commands immediately turning off italic mode.
-# NotPreSpaced- Commands which should not have a space in front of
-# them.
-# Primitives - Primitive TeX commands.
-# PostLink - Commands which generates a page reference.
-# OutFormat - Formats to use for output. See the -f & -v switch
-# in the main doc.
-# QuoteStyle - Either "Traditional" or "Logical". See main doc,
-# warning 38.
-# Silent - These commands do not produce any textual output;
-# and are thus allowed to have a space after them.
-# TabSize - Tab size you are using.
-# TeXInputs - Paths to search \input and \include files for.
-# UserWarn* - These strings will be searched for throughout the
-# text.
-# VerbEnvir - Environments which contents should be ignored.
-# VerbClear - String we will overwrite unwanted data with.
-# WipeArg - Commands (with arguments) which should be ignored
-# in the checking.
-#
-
-
-#####################################################################
-#
-# Enter which type of quote-style you are using here. Currently, we
-# support the following styles:
-#
-# Style Example of use
-# Traditional "An example," he said, "would be great."
-# Logical "An example", he said, "would be great".
-#
-
-QuoteStyle = Logical
-
-#####################################################################
-#
-# Enter here what interval you have between your tabs. Only regular
-# intervals are supported.
-#
-
-TabSize = 8
-
-#####################################################################
-#
-# Here, you can put default commandline options; most users would for
-# instance like to put -v2 here.
-#
-
-CmdLine
-{
-
-}
-
-#####################################################################
-#
-# These patterns will be searched for through the text; no matter
-# whether they appear as normal text, commands or whatever.
-# Currently case-sensitive. They are not found in comments.
-#
-# I usually define a special command like this:
-#
-# \def\unknown{\large\bf??}
-#
-# which I use whenever there is some information I don't have at the
-# moment of writing. Thus, it makes sense to search for it.
-#
-# You should be able to develop your own uses for this.
-#
-
-UserWarn
-{
-
- \unknown
-###
-#
-# Another example; one should write \chktex or Chk\TeX - never ChkTeX.
-#
-###
-
- ChkTeX
-}
-[
-
-###
-#
-# You may put case-insensitive patterns here.
-#
-###
-
-]
-
-
-###
-#
-# These patterns will be searched for, no matter whether they appear
-# as normal text, commands or arguments. However, they will _not_
-# match in verbatim environments.
-#
-# Remember that you have to escape (with a !) the following
-# characters: "#!= as well as spaces and {}[] if they are proceeded by
-# a space.
-#
-# Since these are PCRE regular expressions, you can use (?i) to make
-# the expression case insensitive. See the man pages (man pcresyntax)
-# or the nicely formatted http://perldoc.perl.org/perlre.html for
-# documentation on the regular expression syntax. Note however that
-# some the features of perl regular expression are not available such
-# as running code (callouts), and replacing.
-#
-# An initial PCRE comment (?# ... ) can be used change what is
-# displayed, thereby reminding yourself how to fix the problem.
-#
-###
-UserWarnRegex
-{
-
- (?!#Always! use! \nmid)\\not! *(\||\\mid)
-
- # capitalize section when saying Section 6.
- (?!#-1:Capitalize! before! references)PCRE:\b(chapter|(sub)?section|theorem|lemma|proposition|corollary|appendix)~\\ref
- (?!#1:Capitalize! before! references)POSIX:([^[:alnum:]]|^)(chapter|(sub)?section|theorem|lemma|proposition|corollary|appendix)~\\ref
-
- # spell it out.
- PCRE:(?i)\bintro\b(?!#Spell! it! out.! This! comment! is! not! used.)
- POSIX:([^[:alnum:]]|^)intro([^[:alnum:]]|$)
-
- # Pretty tables--see http://texdoc.net/texmf-dist/doc/latex/booktabs/booktabs.pdf
- (?!#-2:Use! \toprule,! midrule,! or! \bottomrule! from! booktabs)\\hline
- # This relies on it being on a single line, and not having anything
- # else on that line. With PCRE we could match balanced [] and {},
- # but I wonder if it's worth the complexity...
- (?!#-2:Vertical! rules! in! tables! are! ugly)\\begin\{(array|tabularx?\*?)\}(\[.*\])?\{.*\|.*\}
-
-}
-
-
-#####################################################################
-#
-# Here you can list the path of where ChkTeX should look for files it
-# \inputs. The // postfix is now supported; if you append a double
-# path-separator we'll recursively search that directory directories.
-# MS-DOS users must append \\ instead, e.g. "C:\EMTEX\\".
-#
-# If you under either MS-DOS or UNIX wish to search an entire
-# partition or the complete directory tree, you must use *three*
-# slashes, e.g. "c:\\\" or "///". This may be considered to be a bug.
-#
-# By default, we'll search the current directory (not recursively,
-# put "//" in the list for this); any paths specified below will be
-# searched in addition to this.
-#
-
-TeXInputs
-{
-
-}
-
-#####################################################################
-#
-# Here you may specify more output formats for use with the -v option,
-# it simply indexes into this list. Remember to use ! instead of \,
-# though.
-#
-# For explanation of how % fields expand; look at ChkTeX.{dvi,ps,pdf}.
-#
-# We will by default select entry number _two_ in this list (we count
-# from 0), and -v without any parameter selects entry number _three_.
-#
-
-OutFormat
-{
-
-# -v0; silent mode
-%f%b%l%b%c%b%n%b%m!n
-
-# -v1; normal mode
-"%k %n in %f line %l: %m!n%r%s%t!n%u!n"
-
-# -v2; fancy mode
-"%k %n in %f line %l: %m!n%r%i%s%I%t!n!n"
-
-# -v3; lacheck mode
-"!"%f!", line %l: %m!n"
-
-# -v4; verbose lacheck mode
-"!"%f!", line %l: %m!n%r%s%t!n%u!n"
-
-# -v5; no line number, ease auto-test
-"%k %n in %f: %m!n%r%s%t!n%u!n"
-
-# -v6; emacs compilation mode
-"!"%f!", line %l.%c:(#%n) %m!n"
-
-}
-
-
-
-#####################################################################
-#
-# These commands should be ignored when detecting whether a command
-# is ended by a space. You can specify regular expressions in the []
-# section in case you have many custom macros that can be safely
-# terminated with a space.
-#
-
-Silent
-{
- \rm \em \bf \it \sl \sf \sc \tt \selectfont
- \rmfamily \sffamily \ttfamily \mdseries \bfseries
- \slshape \scshape \relax
- \vskip \pagebreak \nopagebreak
-
- \textrm \textem \textbf \textit \textsl \textsf \textsc \texttt
-
- \clearpage \ddots \dotfill \flushbottom \fussy \indent \linebreak
- \onecolumn \pagebreak \pushtabs \poptabs \scriptsize \sloppy
- \twocolumn \vdots
- \today \kill \newline \thicklines \thinlines
-
- \columnsep \space \item \tiny \footnotesize \small \normalsize
- \normal \large \Large \LARGE \huge \Huge \printindex
-
- \newpage \listoffigures \listoftables \tableofcontents
- \maketitle \makeindex
-
- \hline \hrule \vrule
-
- \centering
-
- \bigskip \medskip \smallskip
-
- \noindent \expandafter
-
- \makeatletter \makeatother
-
- \columnseprule
-
- \textwidth \textheight \hsize \vsize
-
- \if \fi \else
-
- \csname \endcsname
-
- \z@ \p@ \@warning \typeout
-
- \dots \ldots \input \endinput \nextline \leavevmode \cdots
- \appendix \listfiles \and \quad
- \hskip \vfill \vfil \hfill \hfil \topmargin \oddsidemargin
- \frenchspacing \nonfrenchspacing
- \begingroup \endgroup \par
-
- \vrefwarning \upshape \headheight \headsep \hoffset \voffset
- \cdot \qquad
- \left \right
- \qedhere
-
- \xspace
-
- \addlinespace \cr \fill \frontmatter
- \toprule \midrule \bottomrule
-
-}[
-# Here you can put regular expressions to match Silent macros. It was
-# designed for the case where you have many custom macros sharing a
-# common prefix, but can of course be used for other things.
-
-# \\my.*
-]
-
-#####################################################################
-#
-# Here, you can specify the length of various dashes. We sort the
-# dash according to which type of characters that are on the left and
-# right of it. We are only conclusive if they are the same.
-#
-# We associate as follows:
-#
-# Name Type of character on each side
-# HyphDash Alphabetic (foo-bar)
-# NumDash Numeric (2--3)
-# WordDash Space (like this --- see?)
-#
-# Below you specify how many dashes which are legal in each case. We
-# define 0 as a magic constant which always generates an error. You
-# may specify more than one legal dash-length.
-#
-# Let's look at an example. You use the following dash-syntax:
-#
-# foo-bar
-# 2--3
-# like this---see?
-#
-#
-# HYPHDASH { 1 3 } # Either a hyphen, or inter-word
-# NUMDASH { 2 } # Between words
-# WORDDASH { 0 } # We never use this
-#
-
-HyphDash
-{
- 1 3
-}
-
-NumDash
-{
- 2
-}
-
-WordDash
-{
- 3
-}
-
-#####################################################################
-#
-# This keyword indicates commands whose argument isn't LaTeX code,
-# and thus should be ignored.
-#
-# After the command, you may place arguments that you wish that
-# should be wiped in the process; use [] for optional arguments, {}
-# for required ones and * if the command supports an alternative
-# variant. These should be separated from the command with a colon.
-# Some commands (e.g. \cmidrule) use () to delimit and optional
-# argument and so this syntax is supported as well.
-#
-# For instance, if you would like to wipe the \newcommand command,
-# you would declare it as \newcommand:*[][]{}
-#
-# These commands may be "executed" before they're wiped, so you will
-# typically also wish to list filehandling commands and similar here.
-#
-
-WipeArg
-{
- \label:{} \ref:{} \eqref:{} \vref:{} \pageref:{} \index:[]{}
- \cite:[]{} \nocite:{}
- \input:{} \verbatiminput:[]{} \listinginput:[]{}{}
- \verbatimtabinput:[]{} \include:{} \includeonly:{}
- \bibitem:[]{}
- \cline:{} \cmidrule:[](){}
- \href:{}{}
- # Cleveref -- there are many others that could be here as well...
- \cref:*{} \cpageref:*{} \crefrange:*{}{} \cpagerefrange:*{}{}
- \Cref:*{} \Cpageref:*{} \Crefrange:*{}{} \Cpagerefrange:*{}{}
- # natbib
- \citet:*[][]{} \citep:*[][]{} \citealt:*{} \citealp:*[]{} \citeauthor:*{}
- \Citet:*[][]{} \Citep:*[][]{} \Citealt:*{} \Citealp:*[]{} \Citeauthor:{}
- \citetext:{} \citeyear:*{} \citeyearpar:{}
-}
-
-#####################################################################
-#
-# These environments contain material which will be typeset as
-# mathematics by LaTeX. This turns on/off some warnings.
-#
-# We will automagically append a * to each keyword.
-#
-
-MathEnvir
-{
- displaymath math eqnarray array equation
- align alignat gather flalign multline
-}
-
-#####################################################################
-#
-# These commands contain material which will be typeset as mathematics
-# by LaTeX. The commands are assumed to have one mandatory argument
-# which is in math mode. This turns on/off some warnings.
-#
-
-MathCmd
-{
- \ensuremath
-}
-
-#####################################################################
-#
-# These commands contain material which will _not_ be typeset as
-# mathematics by LaTeX even if it would otherwise be in mathmode. The
-# commands are assumed to have one mandatory argument which is in text
-# mode. This turns on/off some warnings.
-#
-
-TextCmd
-{
- \text \intertext \shortintertext \mbox
-}
-
-#####################################################################
-#
-# These environments contains material which contents should be
-# ignored.
-#
-# We will automagically append a * to each keyword.
-#
-
-VerbEnvir
-{
- verbatim comment listing verbatimtab rawhtml errexam picture texdraw
- filecontents pgfpicture tikzpicture
-}
-
-#####################################################################
-#
-# ChkTeX does automagically catch most abbreviations; the ones we
-# need to list here, are those which are most likely to be followed
-# by a word with an upper-case letter (that is not the beginning of a
-# new sentence).
-#
-# The case-insensitive abbreviations are not really case-insensitive,
-# it seems to be more practical to only let the first character be
-# case-insensitive, while the remaining are case-sensitive.
-#
-# To speed up the searching process somewhat, we require that these
-# end in a `.', this should not be a problem.
-#
-# Much of this work (both the abbreviations below, and the regexps
-# necessary to catch the remaining automatically) have been provided
-# by Russ Bubley, <russ@scs.leeds.ac.uk>.
-#
-
-Abbrev
-{
-# Ordinals
-1st. 2nd. 3rd. 4th.
-# Titles
-Mr. Mrs. Miss. Ms. Dr. Prof. St.
-
-#
-# Days
-# Mon. Tue. Wed. Thu. Fri. Sat. Sun.
-#
-# Months
-# Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct. Nov. Dec.
-#
-# Letters
-# Kt. Jr.
-#
-# Corporate
-# Co. Ltd.
-#
-# Addresses
-# Rd. Dr. St. Ave. Cres. Gdns. Sq. Circ. Terr. Pl. Arc. La. Clo. Ho. Est. Gn.
-#
-# Misc.
-# oe. pbab. ps. rsvp. Tx.
-}
-[
-###
-#
-# The first letter is case-insensitive in the abbrevs in this
-# list. Due to the nature of the checking algorithm used for
-# this, entries consisting of only one character will be
-# silently ignored.
-#
-##
-
-# Latin
-# cf. "et al." etc. qed. qv. viz.
-#
-# Corporate
-# inc. plc.
-#
-# Misc
-# fax. pcs. qty. tel. misc.
-]
-
-#####################################################################
-#
-# Commands which accent characters, meaning that \i or \j (\imath and
-# \jmath in mathmode) should be used instead of `i' and `j'
-#
-
-IJAccent
-{
- \hat \check \breve \acute \grave \tilde \bar \vec \dot \ddot
-
- \' \` \^ \" \~ \= \. \u \v \H \t
-
-###
-#
-# The remaining accent commands (\c,\d,\b) put their accent _under_
-# the character, not above, and should thus be used with normal i's
-# and j's.
-#
-###
-
-}
-
-#####################################################################
-#
-# Commands which, when the group is terminated, needs italic
-# correction.
-#
-
-Italic
-{
- \it \em \sl
- \itshape \slshape
-}
-
-#####################################################################
-#
-# Commands which makes the font non-italic.
-#
-
-NonItalic
-{
- \bf \rm \sf \tt \sc
- \upshape
-}
-
-#####################################################################
-#
-# Commands which put their argument into italic (and thus possibly
-# needs italic correction in the end).
-#
-# This is currently empty, since \textit, \textsl and \emph do that
-# automatically.
-#
-
-ItalCmd
-{
-}
-
-#####################################################################
-#
-# These commands all have in common that a pagebreak right in front
-# of them is highly undesirable; thus there should be no space in
-# front of them.
-#
-
-PostLink
-{
- \index \label
-}
-
-#####################################################################
-#
-# These commands should not have a space in front of them for various
-# reasons. I.e. much the same as POSTLINK, but produces another
-# warning.
-#
-
-NotPreSpaced
-{
- \footnote \footnotemark \/
-}
-
-#####################################################################
-#
-# The commands listed here, should be prepended with a `~', as in
-# "look in table~\ref{foo}", to avoid the references being split
-# across lines.
-#
-
-Linker
-{
- \ref \vref \pageref \eqref \cite
-}
-
-#####################################################################
-#
-# Commands/characters which should have \cdots in between, e.g.
-# $1+2+3+\cdots+n$.
-#
-
-CenterDots
-{
- = + - \cdot \div & \times \geq \leq < >
-}
-
-#####################################################################
-#
-# Commands/characters which should have \ldots in between, e.g.
-# $1,2,3,\ldots,n$.
-#
-
-LowDots
-{
- . , ;
-}
-
-#####################################################################
-#
-# In maths mode, there are certain aliases for mathematical operators
-# like sin, cos, etc. Ignore the leading backslash in the commands,
-# and so forth. You should list these below.
-#
-
-MathRoman
-{
- log lg ln lim limsup liminf sin arcsin sinh cos arccos cosh tan
- arctan tanh cot coth sec csc max min sup inf arg ker dim hom det
- exp Pr gcd deg bmod pmod mod
-}
-
-#####################################################################
-#
-# These TeX commands have become unnecessary, as there are LaTeX
-# commands that does the same. Purists should thus avoid these in
-# their code.
-#
-# (These are a spell-corrected version of those lacheck uses).
-#
-
-Primitives
-{
- \above \advance \catcode \chardef \closein \closeout \copy \count
- \countdef \cr \crcr \csname \delcode \dimendef \dimen \divide
- \expandafter \font \hskip \vskip \openout
-}
-
-#####################################################################
-#
-# Format: \command:characters
-#
-# We'll emit a warning if any of characters are found after the
-# command.
-#
-
-NoCharNext
-{
- \left:{}$ \right:{}$
-}
-
-#####################################################################
-#
-# We're killing \verb@...@ commands and the arguments of the commands
-# listed above in WipeArg by overwriting them with a string or a
-# single character.
-#
-# This should not contain an alphabetic character (in case the user
-# writes (\foo\verb@bar@), neither should it contain be one of
-# LaTeX's reserved characters (`#$%&~_^\{}'), or any parenthesis
-# character ('()[]{}'). If possible, don't use a punctuation
-# character, either, or any spacing character.
-#
-# The asterisk is also unsuitable, as some commands behave in another
-# way if they are appended with an asterisk. Which more or less
-# leaves us with the pipe.
-#
-# Please note that this may also be a _string_, which will be
-# repeated until the proper length is reached.
-#
-
-VerbClear = "|"
-
-#
-# All for now - have fun.
-#
-#####################################################################
projects / config / helga / etc.git / commitdiff