--- /dev/null
+##
+## ChkTeX, example resource file for ChkTeX.
+## Copyright (C) 1995-96 Jens T. Berger Thielemann
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+##
+## Contact the author at:
+## Jens Berger
+## Spektrumvn. 4
+## N-0666 Oslo
+## Norway
+## E-mail: <jensthi@ifi.uio.no>
+##
+
+#####################################################################
+#
+# Note: The format has changed slightly (again). The { ... }
+# syntax does now mean case-sensitive comparing, while [ ... ] means
+# case-insensitive comparing of the keywords. Case-insensitive
+# comparing of the keywords is only supported on a few of the
+# keywords (it's not meaningful in all contexts, and it slows ChkTeX
+# down). Keywords supporting this are marked throughout the file.
+#
+# You may also reset a list by saying "KEYWORD = { ... }"; it will
+# then be set equal to the contents of the list you specify.
+#
+# Comments begin with `#', and continues for the rest of the line.
+# Blank lines plus leading and trailing spaces are of course ignored.
+#
+# The general format of this file is the following:
+#
+# KEYWORD { item item ...} [ item item ... ] /* Adds items */
+#
+# KEYWORD [ item item ...] { item item ... } /* Adds items */
+#
+# KEYWORD = item
+#
+# KEYWORD = { item item ... } /* Clears list before adding */
+#
+# KEYWORD = [ item item ... ] /* Clears list before adding */
+#
+# This does _not_ mean that you may alternate the forms; certain
+# keywords demands a list, other a single value. You thus have to
+# look at the examples of their use.
+#
+# Please also note that if you specify a list-keyword twice, we'll
+# concatenate the lists. If you you specify a item-keyword twice,
+# we'll kill the previous value.
+#
+# We are slightly context-sensitive when detecting tokens like "}"
+# and "]"; they have to be preceded by a space. This generally makes
+# life easier.
+#
+# Items are separated by spaces. Newlines are considered as spaces,
+# but can't be escaped. You may surround items with quotes (`"') to
+# easily put spaces into them.
+#
+# Escape sequences available:
+#
+# Sequence Resulting character
+# ! A space (type `! ', not just a exclamation mark)
+# !" "
+# !# #
+# !! !
+# !{ {
+# !} }
+# ![ [
+# !] ]
+# != =
+# !b Backspace
+# !n New line
+# !r Carriage return
+# !t Tab
+# !f Form feed
+# !xNN NN must be a hexadecimal number (00 - ff),
+# _both_ characters must be included.
+# !dNNN DDD must be a decimal number (000 - 255), all
+# three characters must be included. Unspecified
+# results if DDD > 255.
+# !NNN DDD must be a octal number (000 - 377), all
+# three characters must be included. Unspecified
+# results if DDD > 377.
+#
+# Minor note: As you can see, most of these escape sequences are
+# equal to those in C (with some extensions); however, we use !
+# instead of \ as escape character for obvious reasons.
+#
+#
+# Quick summary of keywords follows. Keywords marked with a * accept
+# keywords accepting case-insensitive lists.
+#
+# Abbrev* - A list of abbreviations not automatically catched.
+# CenterDots - Commands/characters which should have \cdots in
+# between.
+# CmdLine - Default commandline options. These will be
+# processed before the ones you give on the command
+# line.
+# HyphDash \
+# NumDash - No. of dashes allowed in different contexts.
+# WordDash /
+# IJAccent - Commands which puts an accent _over_ their
+# argument.
+# Italic - Commands immediately turning on italic mode.
+# ItalCmd - Commands putting their argument into italic.
+# Linker - Commands which should have a non-breaking space in
+# front.
+# LowDots - Commands/characters which should have \ldots in
+# between.
+# MathEnvir - Environments which turn on math mode.
+# MathRoman - Mathematical operators with LaTeX replacement
+# defined.
+# NoCharNext - Insists on that certain commands aren't followed by
+# certain characters.
+# NonItalic - Commands immediately turning off italic mode.
+# NotPreSpaced- Commands which should not have a space in front of
+# them.
+# Primitives - Primitive TeX commands.
+# PostLink - Commands which generates a page reference.
+# OutFormat - Formats to use for output. See the -f & -v switch
+# in the main doc.
+# QuoteStyle - Either "Traditional" or "Logical". See main doc,
+# warning 38.
+# Silent - These commands do not produce any textual output;
+# and are thus allowed to have a space after them.
+# TabSize - Tab size you are using.
+# TeXInputs - Paths to search \input and \include files for.
+# UserWarn* - These strings will be searched for throughout the
+# text.
+# VerbEnvir - Environments which contents should be ignored.
+# VerbClear - String we will overwrite unwanted data with.
+# WipeArg - Commands (with arguments) which should be ignored
+# in the checking.
+#
+
+
+#####################################################################
+#
+# Enter which type of quote-style you are using here. Currently, we
+# support the following styles:
+#
+# Style Example of use
+# Traditional "An example," he said, "would be great."
+# Logical "An example", he said, "would be great".
+#
+
+QuoteStyle = Logical
+
+#####################################################################
+#
+# Enter here what interval you have between your tabs. Only regular
+# intervals are supported.
+#
+
+TabSize = 8
+
+#####################################################################
+#
+# Here, you can put default commandline options; most users would for
+# instance like to put -v2 here.
+#
+
+CmdLine
+{
+
+}
+
+#####################################################################
+#
+# These patterns will be searched for through the text; no matter
+# whether they appear as normal text, commands or whatever.
+# Currently case-sensitive.
+#
+# I usually define a special command like this:
+#
+# \def\unknown{\large\bf??}
+#
+# which I use whenever there is some information I don't have at the
+# moment of writing. Thus, it makes sense to search for it.
+#
+# You should be able to develop your own uses for this.
+#
+
+UserWarn
+{
+
+ \unknown
+###
+#
+# Another example; one should write \chktex or Chk\TeX - never ChkTeX.
+#
+###
+
+ ChkTeX
+}
+[
+
+###
+#
+# You may put case-insensitive patterns here.
+#
+###
+
+]
+
+#####################################################################
+#
+# Here you can list the path of where ChkTeX should look for files it
+# \inputs. The // postfix is now supported; if you append a double
+# path-separator we'll recursively search that directory directories.
+# MS-DOS users must append \\ instead, e.g. "C:\EMTEX\\".
+#
+# If you under either MS-DOS or UNIX wish to search an entire
+# partition or the complete directory tree, you must use *three*
+# slashes, e.g. "c:\\\" or "///". This may be considered to be a bug.
+#
+# By default, we'll search the current directory (not recursively,
+# put "//" in the list for this); any paths specified below will be
+# searched in addition to this.
+#
+
+TeXInputs
+{
+
+}
+
+#####################################################################
+#
+# Here you may specify more outputformats for use with the -v option,
+# it simply indexes into this list. Remember to use ! instead of \,
+# though.
+#
+# For explanation of how % fields expand; look at ChkTeX.{dvi,ps}.
+#
+# We will by default select entry number _two_ in this list (we count
+# from 0), and -v without any parameter selects entry number _three_.
+#
+
+OutFormat
+{
+
+# -v0; silent mode
+%f%b%l%b%c%b%n%b%m!n
+
+# -v1; normal mode
+"%k %n in %f line %l: %m!n%r%s%t!n%u!n"
+
+# -v2; fancy mode
+"%k %n in %f line %l: %m!n%r%i%s%I%t!n!n"
+
+# -v3; lacheck mode
+"!"%f!", line %l: %m!n"
+
+# -v4; verbose lacheck mode
+"!"%f!", line %l: %m!n%r%s%t!n%u!n"
+
+# -v5; no line number, ease auto-test
+"%k %n in %f: %m!n%r%s%t!n%u!n"
+
+}
+
+
+
+#####################################################################
+#
+# These commands should be ignored when detecting whether a command
+# is ended by a space.
+#
+
+Silent
+{
+ \rm \em \bf \it \sl \sf \sc \tt \selectfont
+ \rmfamily \sffamily \ttfamily \mdseries \bfseries
+ \slshape \scshape \relax
+ \vskip \pagebreak \nopagebreak
+
+ \textrm \textem \textbf \textit \textsl \textsf \textsc \texttt
+
+ \clearpage \ddots \dotfill \flushbottom \fussy \indent \linebreak
+ \onecolumn \pagebreak \pushtabs \poptabs \scriptsize \sloppy
+ \twocolumn \vdots
+ \today \kill \newline \thicklines \thinlines
+
+ \columnsep \space \item \tiny \footnotesize \small \normalsize
+ \normal \large \Large \LARGE \huge \Huge \printindex
+
+ \newpage \listoffigures \listoftables \tableofcontents
+ \maketitle \makeindex
+
+ \hline \hrule \vrule
+
+ \centering
+
+ \bigskip \medskip \smallskip
+
+ \noindent \expandafter
+
+ \makeatletter \makeatother
+
+ \columnseprule
+
+ \textwidth \textheight \hsize \vsize
+
+ \if \fi
+
+ \csname \endcsname
+
+ \z@ \p@ \@warning \typeout
+
+ \dots \ldots \input \endinput \nextline \leavevmode \cdots
+- \appendix \listfiles \and \quad
+ \vfill \vfil \hfill \hfil \topmargin \oddsidemargin
+ \frenchspacing \nonfrenchspacing
+ \begingroup \endgroup \par
+
+ \vrefwarning \upshape \headheight \headsep \hoffset \voffset
+ \cdot \qquad
+ \left \right
+}
+
+#####################################################################
+#
+# Here, you can specify the length of various dashes. We sort the
+# dash according to which type of characters that are on the left and
+# right of of it. We are only conclusive if they are the same.
+#
+# We associate as follows:
+#
+# Name Type of character on each side
+# HyphDash Alphabetic (foo-bar)
+# NumDash Numeric (2--3)
+# WordDash Space (like this --- see?)
+#
+# Below you specify how many dashes which are legal in each case. We
+# define 0 as an magic constant which always generates an error. You
+# may specify more than one legal dash-length.
+#
+# Let's look at an example. You use the following dash-syntax:
+#
+# foo-bar
+# 2--3
+# like this---see?
+#
+#
+# HYPHDASH { 1 3 } # Either a hyphen, or inter-word
+# NUMDASH { 2 } # Between words
+# WORDDASH { 0 } # We never use this
+#
+
+HyphDash
+{
+ 1 3
+}
+
+NumDash
+{
+ 2
+}
+
+WordDash
+{
+ 3
+}
+
+#####################################################################
+#
+# This keyword indicates commands which argument isn't LaTeX code,
+# and which thus should be ignored.
+#
+# After the command, you may place arguments that you wish that
+# should be wiped in the process; use [] for optional arguments, {}
+# for required ones and * if the command supports an alternative
+# variant. These should be separated from the command with a colon.
+#
+# For instance, if you would like to wipe the \newcommand command,
+# you would declare it as \newcommand:*[][]{}
+#
+# These commands may be "executed" before they're wiped, so you will
+# typically also wish to list filehandling commands and similar here.
+#
+
+WipeArg
+{
+ \label:{} \ref:{} \vref:{} \pageref:{} \index:{} \cite:[]{}
+ \input:{} \verbatiminput:[]{} \listinginput:[]{}{}
+ \verbatimtabinput:[]{} \include:{} \includeonly:{}
+ \bibitem:[]{}
+}
+
+#####################################################################
+#
+# These environments contains material which will be typeset as
+# mathematics by LaTeX. This turns on/off some warnings.
+#
+# We will automagically append a * to each keyword.
+#
+
+MathEnvir
+{
+ displaymath math eqnarray array equation
+ align alignat gather flalign multline
+}
+
+#####################################################################
+#
+# These environments contains material which contents should be
+# ignored.
+#
+# We will automagically append a * to each keyword.
+#
+
+VerbEnvir
+{
+ verbatim comment listing verbatimtab rawhtml errexam picture texdraw
+}
+
+#####################################################################
+#
+# ChkTeX does automagically catch most abbreviations; the ones we
+# need to list here, are those which are most likely to be followed
+# by a word with an upper-case letter (that is not the beginning of a
+# new sentence).
+#
+# The case-insensitive abbreviations are not really case-insensitive,
+# it seems to be more practical to only let the first character be
+# case-insensitive, while the remaining are case-sensitive.
+#
+# To speed up the searching process somewhat, we require that these
+# end in a `.', this should not be a problem.
+#
+# Much of this work (both the abbreviations below, and the regexps
+# necessary to catch the remaining automatically) have been provided
+# by Russ Bubley, <russ@scs.leeds.ac.uk>.
+#
+
+
+Abbrev
+{
+# Ordinals
+1st. 2nd. 3rd. 4th.
+# Titles
+Mr. Mrs. Miss. Ms. Dr. Prof. St.
+
+#
+# Days
+# Mon. Tue. Wed. Thu. Fri. Sat. Sun.
+#
+# Months
+# Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct. Nov. Dec.
+#
+# Letters
+# Kt. Jr.
+#
+# Corporate
+# Co. Ltd.
+#
+# Addresses
+# Rd. Dr. St. Ave. Cres. Gdns. Sq. Circ. Terr. Pl. Arc. La. Clo. Ho. Est. Gn.
+#
+# Misc.
+# oe. pbab. ps. rsvp. Tx.
+}
+[
+###
+#
+# The first letter is case-insensitive in the abbrevs in this
+# list. Due to the nature of the checking algorithm used for
+# this, entries consisting of only one character will be
+# silently ignored.
+#
+##
+
+# Latin
+# cf. "et al." etc. qed. qv. viz.
+#
+# Corporate
+# inc. plc.
+#
+# Misc
+# fax. pcs. qty. tel. misc.
+]
+
+#####################################################################
+#
+# Commands which accent characters, meaning that \i or \j (\imath and
+# \jmath in mathmode) should be used instead of `i' and `j'
+#
+
+IJAccent
+{
+ \hat \check \breve \acute \grave \tilde \bar \vec \dot \ddot
+
+ \' \` \^ \" \~ \= \. \u \v \H \t
+
+###
+#
+# The remaining accent commands (\c,\d,\b) put their accent _under_
+# the character, not above, and should thus be used with normal i's
+# and j's.
+#
+###
+
+}
+
+#####################################################################
+#
+# Commands which, when the group is terminated, needs italic
+# correction.
+#
+
+Italic
+{
+ \it \em \sl
+ \itshape \slshape
+}
+
+#####################################################################
+#
+# Commands which makes the font non-italic.
+#
+
+NonItalic
+{
+ \bf \rm \sf \tt \sc
+ \upshape
+}
+
+#####################################################################
+#
+# Commands which puts their argument into italic (and thus possibly
+# needs italic correction in the end).
+#
+# This is currently empty, since \textit, \textsl and \emph do that
+# automatically.
+#
+
+ItalCmd
+{
+}
+
+#####################################################################
+#
+# These commands all have in common that a pagebreak right in front
+# of them is highly undesirable; thus there should be no space in
+# front of them.
+#
+
+PostLink
+{
+ \index \label
+}
+
+#####################################################################
+#
+# These commands should not have a space in front of them for various
+# reasons. I.e. much the same as POSTLINK, but produces another
+# warning.
+#
+
+NotPreSpaced
+{
+ \footnote \footnotemark \/
+}
+
+#####################################################################
+#
+# The commands listed here, should be prepended with a `~', as in
+# "look in table~\ref{foo}", to avoid the references being split
+# across lines.
+#
+
+Linker
+{
+ \ref \vref \pageref \cite
+}
+
+#####################################################################
+#
+# Commands/characters which should have \cdots in between, e.g.
+# $1+2+3+\cdots+n$.
+#
+
+CenterDots
+{
+ = + - \cdot \div & \times \geq \leq < >
+}
+
+#####################################################################
+#
+# Commands/characters which should have \ldots in between, e.g.
+# $1,2,3,\ldots,n$.
+#
+
+LowDots
+{
+ . , ;
+}
+
+#####################################################################
+#
+# In maths mode, there are certain aliases for mathematical operators
+# like sin, cos, etc. Ignore the leading backslash in the commands,
+# and so forth. You should list these below.
+#
+
+MathRoman
+{
+ log lg ln lim limsup liminf sin arcsin sinh cos arccos cosh tan
+ arctan tanh cot coth sec csc max min sup inf arg ker dim hom det
+ exp Pr gcd deg bmod pmod mod
+}
+
+#####################################################################
+#
+# These TeX commands have become unnecessary, as there are LaTeX cmds
+# that does the same. Purists should thus avoid these in their code.
+#
+# (These are a spell-corrected version of those lacheck uses).
+#
+
+Primitives
+{
+ \above \advance \catcode \chardef \closein \closeout \copy \count
+ \countdef \cr \crcr \csname \delcode \dimendef \dimen \divide
+ \expandafter \font \hskip \vskip \openout
+}
+
+#####################################################################
+#
+# Format: \command:characters
+#
+# We'll emit a warning if any of characters are found after the
+# command.
+#
+
+NoCharNext
+{
+ \left:{}$ \right:{}$
+}
+
+#####################################################################
+#
+# We're killing \verb@...@ commands and the arguments of the commands
+# listed above in WIPEARG by overwriting them with a string or a
+# single character.
+#
+# This should not contain an alphabetic character (in case the user
+# writes (\foo\verb@bar@), neither should it contain be one of LaTeX'
+# reserved characters (`#$%&~_^\{}'), or any parenthesis character
+# ('()[]{}'). If possible, don't use a punctuation character,
+# either, or any spacing character.
+#
+# The asterix is also unsuitable, as some commands behave in another
+# way if they are postpended with an asterix. Which more or less
+# leaves us with the pipe.
+#
+# Please note that this may also be a _string_, which will be
+# repeated until the proper length is reached.
+#
+
+VerbClear = "|"
+
+#
+# All for now - have fun.
+#
+#####################################################################
+
projects / config / bruni / etc.git / commitdiff