maybe chmod 0644 'dbus-1/system.d/org.mate.CPUFreqSelector.conf'
maybe chmod 0644 'dbus-1/system.d/org.mate.SettingsDaemon.DateTimeMechanism.conf'
maybe chmod 0644 'dbus-1/system.d/org.opensuse.CupsPkHelper.Mechanism.conf'
-maybe chmod 0644 'dbus-1/system.d/pulseaudio-system.conf'
maybe chmod 0644 'dbus-1/system.d/smart-notifier.conf'
maybe chmod 0644 'dbus-1/system.d/xpra.conf'
maybe chmod 0755 'dconf'
maybe chmod 0755 'init.d/plymouth-log'
maybe chmod 0755 'init.d/postgresql'
maybe chmod 0755 'init.d/procps'
-maybe chmod 0755 'init.d/pulseaudio-enable-autospawn'
maybe chmod 0755 'init.d/rpcbind'
maybe chmod 0755 'init.d/rsync'
maybe chmod 0755 'init.d/samba-ad-dc'
maybe chmod 0755 'pulse'
maybe chmod 0644 'pulse/client.conf'
maybe chmod 0755 'pulse/client.conf.d'
-maybe chmod 0644 'pulse/daemon.conf'
-maybe chmod 0644 'pulse/default.pa'
-maybe chmod 0644 'pulse/system.pa'
maybe chmod 0755 'python3'
maybe chmod 0755 'python3.12'
maybe chmod 0644 'python3.12/sitecustomize.py'
maybe chmod 0755 'xdg'
maybe chmod 0755 'xdg/Xwayland-session.d'
maybe chmod 0755 'xdg/Xwayland-session.d/00-at-spi'
-maybe chmod 0755 'xdg/Xwayland-session.d/00-pulseaudio-x11'
maybe chmod 0755 'xdg/Xwayland-session.d/00-xrdb'
maybe chmod 0755 'xdg/Xwayland-session.d/10-ibus-x11'
maybe chmod 0644 'xdg/accept-languages.codes'
maybe chmod 0644 'xdg/autostart/polkit-gnome-authentication-agent-1.desktop'
maybe chmod 0644 'xdg/autostart/polkit-mate-authentication-agent-1.desktop'
maybe chmod 0644 'xdg/autostart/print-applet.desktop'
-maybe chmod 0644 'xdg/autostart/pulseaudio.desktop'
maybe chmod 0644 'xdg/autostart/smart-notifier.desktop'
maybe chmod 0644 'xdg/autostart/snap-userd-autostart.desktop'
maybe chmod 0644 'xdg/autostart/sticky.desktop'
+++ /dev/null
-<?xml version="1.0"?><!--*-nxml-*-->
-<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
- "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
-
-<!--
-This file is part of PulseAudio.
-
-PulseAudio is free software; you can redistribute it and/or modify it
-under the terms of the GNU Lesser General Public License as
-published by the Free Software Foundation; either version 2.1 of the
-License, or (at your option) any later version.
-
-PulseAudio is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
-Public License for more details.
-
-You should have received a copy of the GNU Lesser General Public
-License along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
--->
-
-<busconfig>
-
- <!-- System-wide PulseAudio runs as 'pulse' user. This fragment is
- not necessary for user PulseAudio instances. -->
-
- <policy user="pulse">
- <allow own="org.pulseaudio.Server"/>
- </policy>
-
-</busconfig>
floppy:x:25:frank
tape:x:26:frank
sudo:x:27:frank
-audio:x:29:pulse,frank,tobias,doris
+audio:x:29:frank,tobias,doris
dip:x:30:frank
www-data:x:33:
backup:x:34:
nm-openvpn:x:123:
avahi:x:124:
colord:x:125:
-pulse:x:126:
-pulse-access:x:127:
geoclue:x:128:
sambashare:x:129:frank,tobias,doris
bind:x:130:
floppy:x:25:frank
tape:x:26:frank
sudo:x:27:frank
-audio:x:29:pulse,frank,tobias,doris
+audio:x:29:frank,tobias,doris
dip:x:30:frank
www-data:x:33:
backup:x:34:
nm-openvpn:x:123:
avahi:x:124:
colord:x:125:
-pulse:x:126:
pulse-access:x:127:
geoclue:x:128:
sambashare:x:129:frank,tobias,doris
bind:x:130:
-postdrop:x:132:
plex:x:963:frank
kvm:x:133:
rdma:x:134:
floppy:*::frank
tape:*::frank
sudo:*::frank
-audio:*::pulse,frank,tobias,doris
+audio:*::frank,tobias,doris
dip:*::frank
www-data:*::
backup:*::
nm-openvpn:!::
avahi:!::
colord:!::
-pulse:!::
-pulse-access:!::
geoclue:!::
sambashare:!::frank,tobias,doris
bind:!::
floppy:*::frank
tape:*::frank
sudo:*::frank
-audio:*::pulse,frank,tobias,doris
+audio:*::frank,tobias,doris
dip:*::frank
www-data:*::
backup:*::
nm-openvpn:!::
avahi:!::
colord:!::
-pulse:!::
pulse-access:!::
geoclue:!::
sambashare:!::frank,tobias,doris
bind:!::
-postdrop:!::
plex:!::frank
kvm:!::
rdma:!::
+++ /dev/null
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides: pulseaudio-enable-autospawn
-# Required-Start: $local_fs
-# Required-Stop: umountfs
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: Enable pulseaudio autospawn
-# Description: Enables autospawn for the pulseaudio daemon
-### END INIT INFO
-
-
-set -e
-
-. /lib/lsb/init-functions
-
-
-case "$1" in
- start|reload|restart|force-reload)
- echo "autospawn=yes" > /run/pulseaudio-enable-autospawn
- ;;
- stop|status)
- ;;
-esac
avahi:x:117:124:Avahi mDNS daemon,,,:/var/run/avahi-daemon:/usr/sbin/nologin
colord:x:118:125:colord colour management daemon,,,:/var/lib/colord:/usr/sbin/nologin
speech-dispatcher:x:119:29:Speech Dispatcher,,,:/var/run/speech-dispatcher:/bin/false
-pulse:x:120:126:PulseAudio daemon,,,:/var/run/pulse:/usr/sbin/nologin
hplip:x:121:7:HPLIP system user,,,:/var/run/hplip:/bin/false
geoclue:x:122:128::/var/lib/geoclue:/usr/sbin/nologin
frank:x:1000:100:Frank Brehm,,,:/home/frank:/bin/bash
frank:x:1000:100:Frank Brehm,,,:/home/frank:/bin/bash
sshd:x:123:65534::/run/sshd:/usr/sbin/nologin
bind:x:124:130::/var/cache/bind:/usr/sbin/nologin
-postfix:x:125:131::/var/spool/postfix:/usr/sbin/nologin
doris:x:1003:100:Doris Hennig:/home/doris:/bin/sh
davis:x:1123:100:Davis Musterer:/home/davis:/bin/sh
heiko:x:1005:100:Heiko Hennig:/home/heiko:/bin/sh
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## more information. Default values are commented out. Use either ; or # for
-## commenting.
-
-; daemonize = no
-; fail = yes
-; allow-module-loading = yes
-; allow-exit = yes
-; use-pid-file = yes
-; system-instance = no
-; local-server-type = user
-; enable-shm = yes
-; enable-memfd = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
-; lock-memory = no
-; cpu-limit = no
-
-; high-priority = yes
-; nice-level = -11
-
-; realtime-scheduling = yes
-; realtime-priority = 5
-
-; exit-idle-time = 20
-; scache-idle-time = 20
-
-; dl-search-path = (depends on architecture)
-
-; load-default-script-file = yes
-; default-script-file = /etc/pulse/default.pa
-
-; log-target = auto
-; log-level = notice
-; log-meta = no
-; log-time = no
-; log-backtrace = 0
-
-; resample-method = speex-float-1
-; avoid-resampling = false
-; enable-remixing = yes
-; remixing-use-all-sink-channels = yes
-; remixing-produce-lfe = no
-; remixing-consume-lfe = no
-; lfe-crossover-freq = 0
-
-; flat-volumes = no
-
-; rescue-streams = yes
-
-; rlimit-fsize = -1
-; rlimit-data = -1
-; rlimit-stack = -1
-; rlimit-core = -1
-; rlimit-as = -1
-; rlimit-rss = -1
-; rlimit-nproc = -1
-; rlimit-nofile = 256
-; rlimit-memlock = -1
-; rlimit-locks = -1
-; rlimit-sigpending = -1
-; rlimit-msgqueue = -1
-; rlimit-nice = 31
-; rlimit-rtprio = 9
-; rlimit-rttime = 200000
-
-; default-sample-format = s16le
-; default-sample-rate = 44100
-; alternate-sample-rate = 48000
-; default-sample-channels = 2
-; default-channel-map = front-left,front-right
-
-; default-fragments = 4
-; default-fragment-size-msec = 25
-
-; enable-deferred-volume = yes
-deferred-volume-safety-margin-usec = 1
-; deferred-volume-extra-delay-usec = 0
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Should be after module-*-restore but before module-*-detect
-load-module module-switch-on-port-available
-
-### Use hot-plugged devices like Bluetooth or USB automatically (LP: #1702794)
-.ifexists module-switch-on-connect.so
-load-module module-switch-on-connect
-.endif
-
-### Load audio drivers statically
-### (it's probably better to not load these drivers manually, but instead
-### use module-udev-detect -- see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
-#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-load-module module-udev-detect
-.else
-### Use the static hardware detection module (for systems that lack udev support)
-load-module module-detect
-.endif
-
-### Automatically connect sink and source if JACK server is present
-.ifexists module-jackdbus-detect.so
-.nofail
-load-module module-jackdbus-detect channels=2
-.fail
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-policy.so
-load-module module-bluetooth-policy
-.endif
-
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-#load-module module-zeroconf-publish
-
-### Load the RTP receiver module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GSettings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gsettings.so
-.nofail
-load-module module-gsettings
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-.ifexists module-console-kit.so
-load-module module-console-kit
-.endif
-.ifexists module-systemd-login.so
-load-module module-systemd-login
-.endif
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music/video streams when a phone stream is active
-load-module module-role-cork
-
-### Block audio recording for snap confined packages unless they have
-### the "pulseaudio" or "audio-record" interfaces plugged.
-.ifexists module-snap-policy.so
-load-module module-snap-policy
-.endif
-
-### Modules to allow autoloading of filters (such as echo cancellation)
-### on demand. module-filter-heuristics tries to determine what filters
-### make sense, and module-filter-apply does the heavy-lifting of
-### loading modules and rerouting streams.
-load-module module-filter-heuristics
-load-module module-filter-apply
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input
-
-### Allow including a default.pa.d directory, which if present, can be used
-### for additional configuration snippets.
-### Note that those snippet files must have a .pa file extension, not .conf
-.nofail
-.include /etc/pulse/default.pa.d
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-# This startup script is used only if PulseAudio is started in system
-# mode.
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-load-module module-udev-detect
-.else
-### Use the static hardware detection module (for systems that lack udev/hal support)
-load-module module-detect
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Allow including a system.pa.d directory, which if present, can be used
-### for additional configuration snippets.
-### Note that those snippet files must have a .pa file extension, not .conf
-.nofail
-.include /etc/pulse/system.pa.d
+++ /dev/null
-../init.d/pulseaudio-enable-autospawn
\ No newline at end of file
+++ /dev/null
-../init.d/pulseaudio-enable-autospawn
\ No newline at end of file
+++ /dev/null
-../init.d/pulseaudio-enable-autospawn
\ No newline at end of file
+++ /dev/null
-../init.d/pulseaudio-enable-autospawn
\ No newline at end of file
+++ /dev/null
-../init.d/pulseaudio-enable-autospawn
\ No newline at end of file
+++ /dev/null
-../init.d/pulseaudio-enable-autospawn
\ No newline at end of file
+++ /dev/null
-../init.d/pulseaudio-enable-autospawn
\ No newline at end of file
avahi:*:18246:0:99999:7:::
colord:*:18246:0:99999:7:::
speech-dispatcher:!:18246:0:99999:7:::
-pulse:*:18246:0:99999:7:::
hplip:*:18246:0:99999:7:::
geoclue:*:18246:0:99999:7:::
frank:$6$B9vdOwg3$FGETupX4vQ3JAcN4IKoEeA5ITcdU6PHu421SKsgINS4Hg51vksMoDw58HorDtzJntBufSaB/cQIFT2s7O6Scp.:18383:0:99999:7:::
frank:$6$B9vdOwg3$FGETupX4vQ3JAcN4IKoEeA5ITcdU6PHu421SKsgINS4Hg51vksMoDw58HorDtzJntBufSaB/cQIFT2s7O6Scp.:18383:0:99999:7:::
sshd:*:18383:0:99999:7:::
bind:*:18383:0:99999:7:::
-postfix:*:18384:0:99999:7:::
doris:$y$j9T$AZOlxONjkPQpF4fKNni1p0$U28PgTvsoDdp1fT.ZeaXgeRPcXRXU6qInwxhCc9votB:19881:0:99999:7:::
davis:$6$LGOGpMo7$IEac4EA0nNsTr7OeyFGgDkPm3QNmCX.oB43aVgnwWPFGItGxCY1zD2XlHWEy3fBYziCXI.vbwElYnwYzltzlt1:18008:0:99999:7:::
heiko:$6$H4HqXLQP$C8z9qeK1thF1pEN.ABVIghuRwNU4eIVBLbEo3N7RcnEebwNevoulYo.mGH/tXcEfnE2WsVTILMpPH1FHKD5AK/:15590:0:99999:7:::
+++ /dev/null
-/usr/lib/systemd/user/pulseaudio.service
\ No newline at end of file
+++ /dev/null
-/dev/null
\ No newline at end of file
+++ /dev/null
-/dev/null
\ No newline at end of file
+++ /dev/null
-/usr/lib/systemd/user/pulseaudio.socket
\ No newline at end of file
+++ /dev/null
-#!/bin/sh
-
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-set -e
-
-if [ -n "$1" ] ; then
- case $1 in
- stop)
- /usr/bin/pactl unload-module module-x11-publish > /dev/null
- /usr/bin/pactl unload-module module-x11-cork-request > /dev/null
- /usr/bin/pactl unload-module module-device-manager > /dev/null
- /usr/bin/pactl unload-module module-x11-xsmp > /dev/null
- exit 0
- ;;
- start)
- # Let it continue further down
- ;;
- *)
- echo "Unknown argument $1"
- exit 1
- ;;
- esac
-fi
-
-if [ x"$DISPLAY" != x ] ; then
-
- /usr/bin/pactl load-module module-x11-publish "display=$DISPLAY xauthority=$XAUTHORITY" > /dev/null
- /usr/bin/pactl load-module module-x11-cork-request "display=$DISPLAY xauthority=$XAUTHORITY" > /dev/null
-
- # KDE plasma versions older than 5.17.0 use module-device-manager's routing API.
- # Check for current plasma version and load module if it's necessary.
- if [ x"$KDE_FULL_SESSION" = x"true" ]; then
- plasmaversion="$(plasmashell -v 2>/dev/null | sed -n 's/^plasmashell \([0-9][0-9]*\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\)/\1*1000000+\2*1000+\3/p' | head -1)"
- if [ -n "$plasmaversion" ] && [ "$(($plasmaversion))" -lt "5017000" ]; then
- /usr/bin/pactl load-module module-device-manager "do_routing=1" > /dev/null
- fi
- fi
-
- if [ x"$SESSION_MANAGER" != x ] ; then
- /usr/bin/pactl load-module module-x11-xsmp "display=$DISPLAY xauthority=$XAUTHORITY session_manager=$SESSION_MANAGER" > /dev/null
- fi
-fi
+++ /dev/null
-[Desktop Entry]
-Version=1.0
-Name[af]=PulseAudio-klankstelsel
-Name[as]=PulseAudio শব্দ ব্যৱস্থা
-Name[be]=Гукавая сістэма PulseAudio
-Name[bn_IN]=PulseAudio শব্দ ব্যবস্থা
-Name[ca]=Sistema de so PulseAudio
-Name[cs]=Zvukový systém PulseAudio
-Name[da]=PulseAudio-lydsystem
-Name[de_CH]=PulseAudio Sound System
-Name[de]=PulseAudio Soundsystem
-Name[el]=Σύστημα ήχου PulseAudio
-Name[es]=Sistema de Sonido PulseAudio
-Name[fi]=PulseAudio-äänijärjestelmä
-Name[fr]=Système de son PulseAudio
-Name[gl]=Sistema de son PulseAudio
-Name[gu]=PulseAudio સાઉન્ડ સિસ્ટમ
-Name[he]=מערכת הקול PulseAudio
-Name[hi]=पल्सऑडियो ध्वनि तंत्र
-Name[hr]=PulseAudio zvučni sustav
-Name[hu]=PulseAudio hangrendszer
-Name[id]=Sistem Suara PulseAudio
-Name[it]=Sistema sonoro PulseAudio
-Name[ja]=PulseAudio サウンドシステム
-Name[kk]=PulseAudio дыбыс жүйесі
-Name[kn]=PulseAudio ಧ್ವನಿ ವ್ಯವಸ್ಥೆ
-Name[ko]=펄스오디오 사운드 시스템
-Name[lt]=PulseAudio garso sistema
-Name[ml]=PulseAudio സൌണ്ട് സിസ്റ്റം
-Name[mr]=PulseAudio आवाज प्रणाली
-Name[nl]=PulseAudio geluidssysteem
-Name[nn]=PulseAudio lydsystem
-Name[oc]=Sistèma de son PulseAudio
-Name[or]=PulseAudio ଧ୍ୱନି ତନ୍ତ୍ର
-Name[pa]=ਪਲਸਆਡੀਓ ਸਾਊਂਡ ਸਿਸਟਮ
-Name[pl]=System dźwięku PulseAudio
-Name[pt_BR]=Sistema de som PulseAudio
-Name[pt]=Sistema de Som PulseAudio
-Name[ru]=Звуковая система PulseAudio
-Name[sk]=Zvukový systém PulseAudio
-Name[sr@latin]=PulseAudio zvučni sistem
-Name[sr]=PulseAudio звучни систем
-Name[sv]=PulseAudio ljudsystem
-Name[ta]=பள்ஸ் ஆடியோ ஒலி கணினி
-Name[te]=PulseAudio శబ్దపు సిస్టమ్
-Name[tr]=PulseAudio Ses Sistemi
-Name[uk]=Звукова система PulseAudio
-Name[zh_CN]=PulseAudio 声音系统
-Name[zh_TW]=PulseAudio 音效系統
-Name[eo]=PulseAudio-sonsistemo
-Name=PulseAudio Sound System
-Comment[af]=Begin die PulseAudio-klankstelsel
-Comment[as]=PulseAudio শব্দ ব্যৱস্থা আৰম্ভ কৰা হ'ব
-Comment[be]=Запуск гукавой сістэмы PulseAudio
-Comment[bn_IN]=PulseAudio শব্দ ব্যবস্থা আরম্ভ করা হবে
-Comment[ca]=Inicialitza el sistema de so PulseAudio
-Comment[cs]=Spustit zvukový systém PulseAudio
-Comment[da]=Start PulseAudio-lydsystemet
-Comment[de_CH]=Das PulseAudio Sound System starten
-Comment[de]=Das PulseAudio Soundsystem starten
-Comment[el]=Έναρξη του συστήματος ήχου PulseAudio
-Comment[es]=Iniciar el Sistema de Sonido PulseAudio
-Comment[fi]=Käynnistä PulseAudio-äänijärjestelmä
-Comment[fr]=Démarrer le système de son PulseAudio
-Comment[gl]=Iniciar o Sistema de son PulseAudio
-Comment[gu]=PulseAudio સાઉન્ડ સિસ્ટમને શરૂ કરો
-Comment[he]=הפעלת מערכת הקול PulseAudio
-Comment[hi]=पल्सऑडियो ध्वनि तंत्र प्रारंभ करें
-Comment[hr]=Pokreni PulseAudio zvučni sustav
-Comment[hu]=A PulseAudio hangrendszer elindítása
-Comment[id]=Memulai Sistem Suara PulseAudio
-Comment[it]=Avvia il sistema sonoro PulseAudio
-Comment[ja]=PulseAudio サウンドシステムを開始
-Comment[kk]=PulseAudio дыбыс жүйесін іске қосу
-Comment[kn]=PulseAudio ಧ್ವನಿ ವ್ಯವಸ್ಥೆಯನ್ನು ಆರಂಭಿಸಿ
-Comment[ko]=펄스오디오 사운드 시스템을 시작합니다
-Comment[lt]=Paleisti PulseAudio garso sistemą
-Comment[ml]=PulseAudio സൌണ്ട് സിസ്റ്റം ആരംഭിക്കുക
-Comment[mr]=PulseAudio आवाज प्रणाली सुरू करा
-Comment[nl]=Start het PulseAudio geluidssysteem
-Comment[nn]=Start PulseAudio-lydsystemet
-Comment[oc]=Aviar lo sistèma de son PulseAudio
-Comment[or]=PulseAudio ଧ୍ୱନି ତନ୍ତ୍ରକୁ ଆରମ୍ଭ କରନ୍ତୁ
-Comment[pa]=ਪਲਸਆਡੀਓ ਸਾਊਂਡ ਸਿਸਟਮ ਚਲਾਓ
-Comment[pl]=Uruchomienie systemu dźwięku PulseAudio
-Comment[pt_BR]=Inicie o sistema de som PulseAudio
-Comment[pt]=Inciar o Sistema de Som PulseAudio
-Comment[ru]=Запуск звуковой системы PulseAudio
-Comment[sk]=Spustenie zvukového systému PulseAudio
-Comment[sr@latin]=Pokreni PulseAudio zvučni sistem
-Comment[sr]=Покрени PulseAudio звучни систем
-Comment[sv]=Starta ljudsystemet PulseAudio
-Comment[ta]=பள்ஸ் ஆடியோ ஒலி கணினியை துவக்கவும
-Comment[te]=PulseAudio శబ్దపు సిస్టమ్ను ప్రారంభించుము
-Comment[tr]=PulseAudio Ses Sistemini Başlat
-Comment[uk]=Запустити звукову систему PulseAudio
-Comment[zh_CN]=启动 PulseAudio 声音系统
-Comment[zh_TW]=啟動 PulseAudio 音效系統
-Comment[eo]=Startigi la PulseAudio-sonsistemon
-Comment=Start the PulseAudio Sound System
-Exec=start-pulseaudio-x11
-Terminal=false
-Type=Application
-X-GNOME-Autostart-Phase=Initialization
-X-GNOME-HiddenUnderSystemd=true
-X-KDE-autostart-phase=1
-NoDisplay=true
projects / config / bruni / etc-mint-new1.git / commitdiff