maybe chmod 0644 'config-archive/etc/mysql/my.cnf.1'
maybe chmod 0644 'config-archive/etc/mysql/my.cnf.2'
maybe chmod 0644 'config-archive/etc/mysql/my.cnf.3'
+maybe chmod 0644 'config-archive/etc/mysql/my.cnf.4'
maybe chmod 0644 'config-archive/etc/mysql/my.cnf.dist'
maybe chmod 0755 'config-archive/etc/nagios'
maybe chmod 0644 'config-archive/etc/nagios/cgi.cfg,v'
maybe chmod 0644 'config-archive/etc/rc.conf.5'
maybe chmod 0644 'config-archive/etc/rc.conf.6'
maybe chmod 0644 'config-archive/etc/rc.conf.7'
+maybe chmod 0644 'config-archive/etc/rc.conf.8'
maybe chmod 0644 'config-archive/etc/rc.conf.dist'
+maybe chmod 0644 'config-archive/etc/rc.conf.dist.new'
maybe chmod 0755 'config-archive/etc/reoback'
maybe chmod 0644 'config-archive/etc/reoback/files.conf'
maybe chmod 0644 'config-archive/etc/reoback/files.conf.dist'
# /etc/mysql/my.cnf: The global mysql configuration file.
-# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.6,v 1.2 2015/03/15 17:31:35 grknight Exp $
+# $Id$
# The following options will be passed to all MySQL clients
[client]
# and upstream wants things to be under /var/lib/mysql/, so that's the route
# we have to take for the moment
#innodb_data_home_dir = /var/lib/mysql/
+#innodb_log_arch_dir = /var/lib/mysql/
#innodb_log_group_home_dir = /var/lib/mysql/
# you may wish to change this size to be more suitable for your system
# the max is there to avoid run-away growth on your machine
[mysqlhotcopy]
interactive-timeout
+
+[mariadb]
# /etc/mysql/my.cnf: The global mysql configuration file.
-# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.6,v 1.1 2014/10/08 16:42:41 grknight Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.6,v 1.2 2015/03/15 17:31:35 grknight Exp $
# The following options will be passed to all MySQL clients
[client]
# and upstream wants things to be under /var/lib/mysql/, so that's the route
# we have to take for the moment
#innodb_data_home_dir = /var/lib/mysql/
-#innodb_log_arch_dir = /var/lib/mysql/
#innodb_log_group_home_dir = /var/lib/mysql/
# you may wish to change this size to be more suitable for your system
# the max is there to avoid run-away growth on your machine
# /etc/mysql/my.cnf: The global mysql configuration file.
-# $Header: /etc/mysql/.rcs/my.cnf,v 1.5 2010/11/30 08:33:13 root Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-5.6,v 1.1 2014/10/08 16:42:41 grknight Exp $
# The following options will be passed to all MySQL clients
[client]
skip-external-locking
key_buffer = 32M
max_allowed_packet = 4M
-table_cache = 64
+table_open_cache = 400
sort_buffer_size = 2M
net_buffer_length = 8K
read_buffer_size = 2M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 32M
#language = /usr/share/mysql/english
-language = /usr/share/mysql/german
+#language = /usr/share/mysql/german
+lc_messages_dir = /usr/share/mysql
+lc_messages = de_DE
# security:
# using "localhost" in connects uses sockets by default
#log-update = /path-to-dedicated-directory/hostname
# you need the debug USE flag enabled to use the following directives,
-# if needed, uncomment them, start the server and issue
+# if needed, uncomment them, start the server and issue
# #tail -f /tmp/mysqld.sql /tmp/mysqld.trace
# this will show you *exactly* what's happening in your server ;)
#debug = d:t:i:o,/tmp/mysqld.trace
#one-thread
-# uncomment the following directives if you are using BDB tables
-#bdb_cache_size = 4M
-#bdb_max_lock = 10000
-
-# the following is the InnoDB configuration
-# if you wish to disable innodb instead
-# uncomment just the next line
-#skip-innodb
-#
# the rest of the innodb config follows:
# don't eat too much memory, we're trying to be safe on 64Mb boxes
# you might want to bump this up a bit on boxes with more RAM
#safe-updates
[isamchk]
-key_buffer = 20M
+key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
# add a section [mysqld-4.1] or [mysqld-5.0] for specific configurations
[mysqld]
character-set-server = utf8
-#default-character-set = utf8
user = mysql
port = 3306
socket = /var/run/mysqld/mysqld.sock
--- /dev/null
+# /etc/mysql/my.cnf: The global mysql configuration file.
+# $Header: /etc/mysql/.rcs/my.cnf,v 1.5 2010/11/30 08:33:13 root Exp $
+
+# The following options will be passed to all MySQL clients
+[client]
+#password = your_password
+port = 3306
+socket = /var/run/mysqld/mysqld.sock
+
+[mysql]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+prompt=MySQL \u@\h:\d >\_
+
+[mysqladmin]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+
+[mysqlcheck]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+
+[mysqldump]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+
+[mysqlimport]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+
+[mysqlshow]
+character-sets-dir=/usr/share/mysql/charsets
+default-character-set=utf8
+
+[myisamchk]
+character-sets-dir=/usr/share/mysql/charsets
+
+[myisampack]
+character-sets-dir=/usr/share/mysql/charsets
+
+# use [safe_mysqld] with mysql-3
+[mysqld_safe]
+err-log = /var/log/mysql/mysql.err
+
+# add a section [mysqld-4.1] or [mysqld-5.0] for specific configurations
+[mysqld]
+character-set-server = utf8
+#default-character-set = utf8
+user = mysql
+port = 3306
+socket = /var/run/mysqld/mysqld.sock
+pid-file = /var/run/mysqld/mysqld.pid
+log-error = /var/log/mysql/mysqld.err
+basedir = /usr
+datadir = /var/lib/mysql
+skip-external-locking
+key_buffer = 32M
+max_allowed_packet = 4M
+table_cache = 64
+sort_buffer_size = 2M
+net_buffer_length = 8K
+read_buffer_size = 2M
+read_rnd_buffer_size = 4M
+myisam_sort_buffer_size = 32M
+#language = /usr/share/mysql/english
+language = /usr/share/mysql/german
+
+# security:
+# using "localhost" in connects uses sockets by default
+# skip-networking
+#bind-address = 127.0.0.1
+
+#log-bin = helga-mysql-bin
+server-id = 2
+
+#auto_increment_increment = 2
+#auto_increment_offset = 2
+
+#master-host = sarah.brehm-online.com
+#master-port = 3306
+#master-user = replication
+#master-password = uhu
+#master-connect-retry = 60
+#report-host = helga.brehm-online.com
+
+# point the following paths to different dedicated disks
+tmpdir = /tmp/
+#log-update = /path-to-dedicated-directory/hostname
+
+# you need the debug USE flag enabled to use the following directives,
+# if needed, uncomment them, start the server and issue
+# #tail -f /tmp/mysqld.sql /tmp/mysqld.trace
+# this will show you *exactly* what's happening in your server ;)
+
+#log = /tmp/mysqld.sql
+#gdb
+#debug = d:t:i:o,/tmp/mysqld.trace
+#one-thread
+
+# uncomment the following directives if you are using BDB tables
+#bdb_cache_size = 4M
+#bdb_max_lock = 10000
+
+# the following is the InnoDB configuration
+# if you wish to disable innodb instead
+# uncomment just the next line
+#skip-innodb
+#
+# the rest of the innodb config follows:
+# don't eat too much memory, we're trying to be safe on 64Mb boxes
+# you might want to bump this up a bit on boxes with more RAM
+innodb_buffer_pool_size = 64M
+# this is the default, increase it if you have lots of tables
+innodb_additional_mem_pool_size = 4M
+#
+# i'd like to use /var/lib/mysql/innodb, but that is seen as a database :-(
+# and upstream wants things to be under /var/lib/mysql/, so that's the route
+# we have to take for the moment
+#innodb_data_home_dir = /var/lib/mysql/
+#innodb_log_arch_dir = /var/lib/mysql/
+#innodb_log_group_home_dir = /var/lib/mysql/
+# you may wish to change this size to be more suitable for your system
+# the max is there to avoid run-away growth on your machine
+innodb_data_file_path = ibdata1:10M:autoextend:max:128M
+# we keep this at around 25% of of innodb_buffer_pool_size
+# sensible values range from 1MB to (1/innodb_log_files_in_group*innodb_buffer_pool_size)
+innodb_log_file_size = 5M
+# this is the default, increase it if you have very large transactions going on
+innodb_log_buffer_size = 8M
+# this is the default and won't hurt you
+# you shouldn't need to tweak it
+innodb_log_files_in_group=2
+# see the innodb config docs, the other options are not always safe
+innodb_flush_log_at_trx_commit = 1
+innodb_lock_wait_timeout = 50
+innodb_file_per_table
+sync_binlog = 1
+
+[mysqldump]
+quick
+max_allowed_packet = 64M
+
+[mysql]
+# uncomment the next directive if you are not familiar with SQL
+#safe-updates
+
+[isamchk]
+key_buffer = 20M
+sort_buffer_size = 20M
+read_buffer = 2M
+write_buffer = 2M
+
+[myisamchk]
+key_buffer = 40M
+sort_buffer_size = 40M
+read_buffer = 4M
+write_buffer = 4M
+
+[mysqlhotcopy]
+interactive-timeout
# /etc/mysql/my.cnf: The global mysql configuration file.
-# $Id$
# The following options will be passed to all MySQL clients
[client]
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
#SSD_NICELEVEL="-19"
+# Or the ionice level. The format is class[:data] , just like the
+# --ionice start-stop-daemon parameter.
+#SSD_IONICELEVEL="2:2"
# Pass ulimit parameters
# If you are using bash in POSIX mode for your shell, note that the
#rc_foo_bar_after="clock"
# You can also remove dependencies.
-# This is mainly used for saying which servies do NOT provide net.
+# This is mainly used for saying which services do NOT provide net.
#rc_net_tap0_provide="!net"
-##############################################################################
-# LINUX SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on Linux:
+# This is the subsystem type.
+# It is used to match against keywords set by the keyword call in the
+# depend function of service scripts.
+#
+# It should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+# If it is commented out, automatic detection will be used.
+#
+# The list below shows all possible settings as well as the host
+# operating systems where they can be used and autodetected.
+#
# "" - nothing special
-# "docker" - Docker container manager
+# "docker" - Docker container manager (Linux)
+# "jail" - Jail (DragonflyBSD or FreeBSD)
# "lxc" - Linux Containers
# "openvz" - Linux OpenVZ
# "prefix" - Prefix
-# "rkt" - CoreOS container management system
+# "rkt" - CoreOS container management system (Linux)
+# "subhurd" - Hurd subhurds (to be checked)
+# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
# "uml" - Usermode Linux
# "vserver" - Linux vserver
-# "systemd-nspawn" - Container created by the systemd-nspawn utility
-# "xen0" - Xen0 Domain
-# "xenU" - XenU Domain
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
+# "xen0" - Xen0 Domain (Linux and NetBSD)
+# "xenU" - XenU Domain (Linux and NetBSD)
rc_sys=""
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
+# on Linux and Hurd, this is the number of ttys allocated for logins
+# It is used in the consolefont, keymaps, numlock and termencoding
+# service scripts.
rc_tty_number=12
##############################################################################
-# CGROUPS RESOURCE MANAGEMENT
+# LINUX CGROUPS RESOURCE MANAGEMENT
# If you have cgroups turned on in your kernel, this switch controls
# whether or not a group for each controller is mounted under
# Set the pids controller settings for this service.
#rc_cgroup_pids=""
-# Set this to YES if yu want all of the processes in a service's cgroup
+# Set this to YES if you want all of the processes in a service's cgroup
# killed when the service is stopped or restarted.
# This should not be set globally because it kills all of the service's
# child processes, and most of the time this is undesirable. Please set
# come up.
#rc_depend_strict="YES"
-# rc_hotplug is a list of services that we allow to be hotplugged.
-# By default we do not allow hotplugging.
+# rc_hotplug controls which services we allow to be hotplugged.
# A hotplugged service is one started by a dynamic dev manager when a matching
# hardware device is found.
-# This service is intrinsically included in the boot runlevel.
-# To disable services, prefix with a !
+# Hotplugged services appear in the "hotplugged" runlevel.
+# If rc_hotplug is set to any value, we compare the name of this service
+# to every pattern in the value, from left to right, and we allow the
+# service to be hotplugged if it matches a pattern, or if it matches no
+# patterns. Patterns can include shell wildcards.
+# To disable services from being hotplugged, prefix patterns with "!".
+#If rc_hotplug is not set or is empty, all hotplugging is disabled.
# Example - rc_hotplug="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be plugged.
-# Example - rc_hotplug="*"
-# This allows all services to be hotplugged
-#rc_hotplug="*"
+# This allows net.wlan and any service not matching net.* to be hotplugged.
+# Example - rc_hotplug="!net.*"
+# This allows services that do not match "net.*" to be hotplugged.
# rc_logger launches a logging daemon to log the entire rc process to
# /var/log/rc.log
# This is the subsystem type. Valid options on Linux:
# "" - nothing special
+# "docker" - Docker container manager
# "lxc" - Linux Containers
# "openvz" - Linux OpenVZ
# "prefix" - Prefix
+# "rkt" - CoreOS container management system
# "uml" - Usermode Linux
# "vserver" - Linux vserver
# "systemd-nspawn" - Container created by the systemd-nspawn utility
# Set the devices controller settings for this service.
#rc_cgroup_devices=""
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
# Set the memory controller settings for this service.
#rc_cgroup_memory=""
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
# Set the net_prio controller settings for this service.
#rc_cgroup_net_prio=""
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
# Set this to YES if yu want all of the processes in a service's cgroup
# killed when the service is stopped or restarted.
# This should not be set globally because it kills all of the service's
#SSD_NICELEVEL="-19"
# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
#rc_ulimit="-u 30"
# It's possible to define extra dependencies for services like so
# LINUX SPECIFIC OPTIONS
# This is the subsystem type. Valid options on Linux:
-# "" - nothing special
-# "lxc" - Linux Containers
-# "openvz" - Linux OpenVZ
-# "prefix" - Prefix
-# "uml" - Usermode Linux
-# "vserver" - Linux vserver
-# "xen0" - Xen0 Domain
-# "xenU" - XenU Domain
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "systemd-nspawn" - Container created by the systemd-nspawn utility
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# The default value is: /var/log/rc.log
rc_log_path="/var/log/rc.log"
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
# By default we filter the environment for our running scripts. To allow other
# variables through, add them here. Use a * to allow all variables through.
#rc_env_allow="VAR1 VAR2"
#rc_crashed_stop=NO
#rc_crashed_start=YES
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
##############################################################################
# MISC CONFIGURATION VARIABLES
# There variables are shared between many init scripts
# Below is the default list of network fstypes.
#
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# nfs nfs4 ocfs2 shfs smbfs
#
# If you would like to add to this list, you can do so by adding your
# Set unicode to YES to turn on unicode support for keyboards and screens.
unicode="YES"
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but it can be adjusted here.
+#rc_fuser_timeout=60
+
# Below is the default list of network fstypes.
#
# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
-#export SSD_NICELEVEL="-19"
+#SSD_NICELEVEL="-19"
# Pass ulimit parameters
#rc_ulimit="-u 30"
# consolefont, numlock, etc ...)
rc_tty_number=12
+##############################################################################
+# CGROUPS RESOURCE MANAGEMENT
+
# If you have cgroups turned on in your kernel, this switch controls
# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
-# Support for process management by cgroups is planned in the future,
-# so if you turn this off, be aware that you may not be able to use that
-# feature.
+# None of the other options in this section work if this is set to "NO".
#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"
rc_tty_number=12
# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controler is mounted under
+# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
# Support for process management by cgroups is planned in the future,
# so if you turn this off, be aware that you may not be able to use that
# Global OpenRC configuration settings
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+
# Set rc_interactive to "YES" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "NO" to disable
-# this feature.
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
#rc_interactive="YES"
# If we need to drop to a shell, you can specify it here.
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
#rc_foo_need="openvpn"
#rc_foo_after="clock"
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
# You can also remove dependencies.
# This is mainly used for saying which servies do NOT provide net.
#rc_net_tap0_provide="!net"
# "vserver" - Linux vserver
# "xen0" - Xen0 Domain
# "xenU" - XenU Domain
-# If this is commented out, automatic detection will be attempted.
-# Note that autodetection will not work in a prefix environment or in a
-# linux container.
+# If this is commented out, automatic detection will be used.
#
# This should be set to the value representing the environment this file is
# PRESENTLY in, not the virtualization the environment is capable of.
# This is the number of tty's used in most of the rc-scripts (like
# consolefont, numlock, etc ...)
rc_tty_number=12
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controler is mounted under
+# /sys/fs/cgroup.
+# Support for process management by cgroups is planned in the future,
+# so if you turn this off, be aware that you may not be able to use that
+# feature.
+#rc_controller_cgroups="YES"
--- /dev/null
+# Global OpenRC configuration settings
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature.
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+rc_shell=/sbin/sulogin
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+rc_log_path="/var/log/rc.log"
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+unicode="YES"
+
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#export SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on Linux:
+# "" - nothing special
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0" - Xen0 Domain
+# "xenU" - XenU Domain
+# If this is commented out, automatic detection will be attempted.
+# Note that autodetection will not work in a prefix environment or in a
+# linux container.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+rc_sys=""
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
--- /dev/null
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+rc_shell=/sbin/sulogin
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug controls which services we allow to be hotplugged.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# Hotplugged services appear in the "hotplugged" runlevel.
+# If rc_hotplug is set to any value, we compare the name of this service
+# to every pattern in the value, from left to right, and we allow the
+# service to be hotplugged if it matches a pattern, or if it matches no
+# patterns. Patterns can include shell wildcards.
+# To disable services from being hotplugged, prefix patterns with "!".
+#If rc_hotplug is not set or is empty, all hotplugging is disabled.
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be hotplugged.
+# Example - rc_hotplug="!net.*"
+# This allows services that do not match "net.*" to be hotplugged.
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="NO"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+unicode="YES"
+
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but it can be adjusted here.
+#rc_fuser_timeout=60
+
+# Below is the default list of network fstypes.
+#
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#SSD_NICELEVEL="-19"
+# Or the ionice level. The format is class[:data] , just like the
+# --ionice start-stop-daemon parameter.
+#SSD_IONICELEVEL="2:2"
+
+# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which services do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+# This is the subsystem type.
+# It is used to match against keywords set by the keyword call in the
+# depend function of service scripts.
+#
+# It should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+# If it is commented out, automatic detection will be used.
+#
+# The list below shows all possible settings as well as the host
+# operating systems where they can be used and autodetected.
+#
+# "" - nothing special
+# "docker" - Docker container manager (Linux)
+# "jail" - Jail (DragonflyBSD or FreeBSD)
+# "lxc" - Linux Containers
+# "openvz" - Linux OpenVZ
+# "prefix" - Prefix
+# "rkt" - CoreOS container management system (Linux)
+# "subhurd" - Hurd subhurds (to be checked)
+# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
+# "uml" - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0" - Xen0 Domain (Linux and NetBSD)
+# "xenU" - XenU Domain (Linux and NetBSD)
+#rc_sys=""
+
+# on Linux and Hurd, this is the number of ttys allocated for logins
+# It is used in the consolefont, keymaps, numlock and termencoding
+# service scripts.
+rc_tty_number=12
+
+##############################################################################
+# LINUX CGROUPS RESOURCE MANAGEMENT
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controller is mounted under
+# /sys/fs/cgroup.
+# None of the other options in this section work if this is set to "NO".
+#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
+# Set this to YES if you want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"
# /etc/mysql/my.cnf: The global mysql configuration file.
-# $Id$
# The following options will be passed to all MySQL clients
[client]
projects / config / helga / etc.git / commitdiff