--- /dev/null
+# Check for interactive bash and that we haven't already been sourced.
+if [ -n "$BASH_VERSION" -a -n "$PS1" -a -z "$BASH_COMPLETION_COMPAT_DIR" ]; then
+
+ # Check for recent enough version of bash.
+ if [ ${BASH_VERSINFO[0]} -gt 4 ] || \
+ [ ${BASH_VERSINFO[0]} -eq 4 -a ${BASH_VERSINFO[1]} -ge 1 ]; then
+ [ -r "${XDG_CONFIG_HOME:-$HOME/.config}/bash_completion" ] && \
+ . "${XDG_CONFIG_HOME:-$HOME/.config}/bash_completion"
+ if shopt -q progcomp && [ -r /usr/share/bash-completion/bash_completion ]; then
+ # Source completion code.
+ BASH_COMPLETION_COMPAT_DIR=/usr/share/bash-completion/completions
+ . /usr/share/bash-completion/bash_completion
+ fi
+ fi
+
+fi
--- /dev/null
+# Check for interactive bash and that we haven't already been sourced.
+if [ -n "$BASH_VERSION" -a -n "$PS1" -a -z "$BASH_COMPLETION_COMPAT_DIR" ]; then
+
+ # Check for recent enough version of bash.
+ if [ ${BASH_VERSINFO[0]} -gt 4 ] || \
+ [ ${BASH_VERSINFO[0]} -eq 4 -a ${BASH_VERSINFO[1]} -ge 1 ]; then
+ [ -r "${XDG_CONFIG_HOME:-$HOME/.config}/bash_completion" ] && \
+ . "${XDG_CONFIG_HOME:-$HOME/.config}/bash_completion"
+ if shopt -q progcomp && [ -r /usr/share/bash-completion/bash_completion ]; then
+ # Source completion code.
+ . /usr/share/bash-completion/bash_completion
+ fi
+ fi
+
+fi
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.1-r1/html
+html_directory = /usr/share/doc/postfix-3.0.2/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme
+readme_directory = /usr/share/doc/postfix-3.0.2/readme
# inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.0/html
+html_directory = /usr/share/doc/postfix-3.0.1-r1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.0/readme
+readme_directory = /usr/share/doc/postfix-3.0.1-r1/readme
+# inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
home_mailbox = .maildir/
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
+# COMPATIBILITY
+#
+# The compatibility_level determines what default settings Postfix
+# will use for main.cf and master.cf settings. These defaults will
+# change over time.
+#
+# To avoid breaking things, Postfix will use backwards-compatible
+# default settings and log where it uses those old backwards-compatible
+# default settings, until the system administrator has determined
+# if any backwards-compatible default settings need to be made
+# permanent in main.cf or master.cf.
+#
+# When this review is complete, update the compatibility_level setting
+# below as recommended in the RELEASE_NOTES file.
+#
+# The level below is what should be used with new (not upgrade) installs.
+#
+#compatibility_level = 2
+
# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.11.3/html
+html_directory = /usr/share/doc/postfix-3.0.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.11.3/readme
+readme_directory = /usr/share/doc/postfix-3.0.0/readme
+meta_directory = /etc/postfix
+shlib_directory = /usr/lib64/postfix/${mail_version}
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
-# http://www.postfix.org/.
+# http://www.postfix.org/BASIC_CONFIGURATION_README.html etc.
#
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.3/html
+html_directory = /usr/share/doc/postfix-2.11.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.3/readme
+readme_directory = /usr/share/doc/postfix-2.11.3/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.2/html
+html_directory = /usr/share/doc/postfix-2.10.3/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.2/readme
+readme_directory = /usr/share/doc/postfix-2.10.3/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.1/html
+html_directory = /usr/share/doc/postfix-2.10.2/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.1/readme
+readme_directory = /usr/share/doc/postfix-2.10.2/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.10.0/html
+html_directory = /usr/share/doc/postfix-2.10.1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.10.0/readme
+readme_directory = /usr/share/doc/postfix-2.10.1/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.5/html
+html_directory = /usr/share/doc/postfix-2.10.0/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.5/readme
+readme_directory = /usr/share/doc/postfix-2.10.0/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.4/html
+html_directory = /usr/share/doc/postfix-2.9.5/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.4/readme
+readme_directory = /usr/share/doc/postfix-2.9.5/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
-smtpd_sasl2_auth_enable = yes
+#smtpd_sasl2_auth_enable = yes
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_sasl_local_domain = $myhostname
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-2.9.3/html
+html_directory = /usr/share/doc/postfix-2.9.4/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-2.9.3/readme
+readme_directory = /usr/share/doc/postfix-2.9.4/readme
home_mailbox = .maildir/
smtpd_sasl_auth_enable = yes
--- /dev/null
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = /usr/lib64/postfix
+
+# The data_directory parameter specifies the location of Postfix-writable
+# data files (caches, random numbers). This directory must be owned
+# by the mail_owner account (see below).
+#
+data_directory = /var/lib/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user@that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+#mydestination = $myhostname, localhost.$mydomain, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user@domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user@domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+#alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+#alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+#recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#mailbox_transport = lmtp:unix:/file/name
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/file/name
+#fallback_transport = cyrus
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user@other.host
+#luser_relay = $local@other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ ddd $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = /usr/share/doc/postfix-2.8.7/html
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /etc/postfix
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = /usr/share/doc/postfix-2.8.7/readme
+home_mailbox = .maildir/
--- /dev/null
+# DO NOT EDIT THIS FILE. EDIT THE MAIN.CF FILE INSTEAD. THE
+# TEXT HERE JUST SHOWS DEFAULT SETTINGS BUILT INTO POSTFIX.
+#
+2bounce_notice_recipient = postmaster
+access_map_defer_code = 450
+access_map_reject_code = 554
+address_verify_cache_cleanup_interval = 12h
+address_verify_default_transport = $default_transport
+address_verify_local_transport = $local_transport
+address_verify_map = btree:$data_directory/verify_cache
+address_verify_negative_cache = yes
+address_verify_negative_expire_time = 3d
+address_verify_negative_refresh_time = 3h
+address_verify_poll_count = ${stress?{1}:{3}}
+address_verify_poll_delay = 3s
+address_verify_positive_expire_time = 31d
+address_verify_positive_refresh_time = 7d
+address_verify_relay_transport = $relay_transport
+address_verify_relayhost = $relayhost
+address_verify_sender = $double_bounce_sender
+address_verify_sender_dependent_default_transport_maps = $sender_dependent_default_transport_maps
+address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
+address_verify_sender_ttl = 0s
+address_verify_service_name = verify
+address_verify_transport_maps = $transport_maps
+address_verify_virtual_transport = $virtual_transport
+alias_database = hash:/etc/mail/aliases
+alias_maps = hash:/etc/mail/aliases, nis:mail.aliases
+allow_mail_to_commands = alias, forward
+allow_mail_to_files = alias, forward
+allow_min_user = no
+allow_percent_hack = yes
+allow_untrusted_routing = no
+alternate_config_directories =
+always_add_missing_headers = no
+always_bcc =
+anvil_rate_time_unit = 60s
+anvil_status_update_time = 600s
+append_at_myorigin = yes
+append_dot_mydomain = ${{$compatibility_level} < {1} ? {yes} : {no}}
+application_event_drain_time = 100s
+authorized_flush_users = static:anyone
+authorized_mailq_users = static:anyone
+authorized_submit_users = static:anyone
+backwards_bounce_logfile_compatibility = yes
+berkeley_db_create_buffer_size = 16777216
+berkeley_db_read_buffer_size = 131072
+best_mx_transport =
+biff = yes
+body_checks =
+body_checks_size_limit = 51200
+bounce_notice_recipient = postmaster
+bounce_queue_lifetime = 5d
+bounce_service_name = bounce
+bounce_size_limit = 50000
+bounce_template_file =
+broken_sasl_auth_clients = no
+canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
+canonical_maps =
+cleanup_service_name = cleanup
+command_directory = /usr/sbin
+command_execution_directory =
+command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
+command_time_limit = 1000s
+compatibility_level = 0
+config_directory = /etc/postfix
+confirm_delay_cleared = no
+connection_cache_protocol_timeout = 5s
+connection_cache_service_name = scache
+connection_cache_status_update_time = 600s
+connection_cache_ttl_limit = 2s
+content_filter =
+cyrus_sasl_config_path =
+daemon_directory = /usr/libexec/postfix
+daemon_table_open_error_is_fatal = no
+daemon_timeout = 18000s
+data_directory = /var/lib/postfix
+debug_peer_level = 2
+debug_peer_list =
+debugger_command =
+default_database_type = hash
+default_delivery_slot_cost = 5
+default_delivery_slot_discount = 50
+default_delivery_slot_loan = 3
+default_delivery_status_filter =
+default_destination_concurrency_failed_cohort_limit = 1
+default_destination_concurrency_limit = 20
+default_destination_concurrency_negative_feedback = 1
+default_destination_concurrency_positive_feedback = 1
+default_destination_rate_delay = 0s
+default_destination_recipient_limit = 50
+default_extra_recipient_limit = 1000
+default_filter_nexthop =
+default_minimum_delivery_slots = 3
+default_privs = nobody
+default_process_limit = 100
+default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
+default_recipient_limit = 20000
+default_recipient_refill_delay = 5s
+default_recipient_refill_limit = 100
+default_transport = smtp
+default_verp_delimiters = +=
+defer_code = 450
+defer_service_name = defer
+defer_transports =
+delay_logging_resolution_limit = 2
+delay_notice_recipient = postmaster
+delay_warning_time = 0h
+deliver_lock_attempts = 20
+deliver_lock_delay = 1s
+destination_concurrency_feedback_debug = no
+detect_8bit_encoding_header = yes
+disable_dns_lookups = no
+disable_mime_input_processing = no
+disable_mime_output_conversion = no
+disable_verp_bounces = no
+disable_vrfy_command = no
+dnsblog_reply_delay = 0s
+dnsblog_service_name = dnsblog
+dont_remove = 0
+double_bounce_sender = double-bounce
+duplicate_filter_limit = 1000
+empty_address_default_transport_maps_lookup_key = <>
+empty_address_recipient = MAILER-DAEMON
+empty_address_relayhost_maps_lookup_key = <>
+enable_long_queue_ids = no
+enable_original_recipient = yes
+error_delivery_slot_cost = $default_delivery_slot_cost
+error_delivery_slot_discount = $default_delivery_slot_discount
+error_delivery_slot_loan = $default_delivery_slot_loan
+error_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+error_destination_concurrency_limit = $default_destination_concurrency_limit
+error_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+error_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+error_destination_rate_delay = $default_destination_rate_delay
+error_destination_recipient_limit = $default_destination_recipient_limit
+error_extra_recipient_limit = $default_extra_recipient_limit
+error_initial_destination_concurrency = $initial_destination_concurrency
+error_minimum_delivery_slots = $default_minimum_delivery_slots
+error_notice_recipient = postmaster
+error_recipient_limit = $default_recipient_limit
+error_recipient_refill_delay = $default_recipient_refill_delay
+error_recipient_refill_limit = $default_recipient_refill_limit
+error_service_name = error
+execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
+expand_owner_alias = no
+export_environment = TZ MAIL_CONFIG LANG
+fallback_transport =
+fallback_transport_maps =
+fast_flush_domains = $relay_domains
+fast_flush_purge_time = 7d
+fast_flush_refresh_time = 12h
+fault_injection_code = 0
+flush_service_name = flush
+fork_attempts = 5
+fork_delay = 1s
+forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
+forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
+frozen_delivered_to = yes
+hash_queue_depth = 1
+hash_queue_names = deferred, defer
+header_address_token_limit = 10240
+header_checks =
+header_size_limit = 102400
+helpful_warnings = yes
+home_mailbox =
+hopcount_limit = 50
+html_directory = no
+ignore_mx_lookup_error = no
+import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
+in_flow_delay = 1s
+inet_interfaces = all
+inet_protocols = all
+initial_destination_concurrency = 5
+internal_mail_filter_classes =
+invalid_hostname_reject_code = 501
+ipc_idle = 5s
+ipc_timeout = 3600s
+ipc_ttl = 1000s
+line_length_limit = 2048
+lmdb_map_size = 16777216
+lmtp_address_preference = any
+lmtp_address_verify_target = rcpt
+lmtp_assume_final = no
+lmtp_bind_address =
+lmtp_bind_address6 =
+lmtp_body_checks =
+lmtp_cname_overrides_servername = no
+lmtp_connect_timeout = 0s
+lmtp_connection_cache_destinations =
+lmtp_connection_cache_on_demand = yes
+lmtp_connection_cache_time_limit = 2s
+lmtp_connection_reuse_count_limit = 0
+lmtp_connection_reuse_time_limit = 300s
+lmtp_data_done_timeout = 600s
+lmtp_data_init_timeout = 120s
+lmtp_data_xfer_timeout = 180s
+lmtp_defer_if_no_mx_address_found = no
+lmtp_delivery_slot_cost = $default_delivery_slot_cost
+lmtp_delivery_slot_discount = $default_delivery_slot_discount
+lmtp_delivery_slot_loan = $default_delivery_slot_loan
+lmtp_delivery_status_filter = $default_delivery_status_filter
+lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
+lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+lmtp_destination_rate_delay = $default_destination_rate_delay
+lmtp_destination_recipient_limit = $default_destination_recipient_limit
+lmtp_discard_lhlo_keyword_address_maps =
+lmtp_discard_lhlo_keywords =
+lmtp_dns_reply_filter =
+lmtp_dns_resolver_options =
+lmtp_dns_support_level =
+lmtp_enforce_tls = no
+lmtp_extra_recipient_limit = $default_extra_recipient_limit
+lmtp_generic_maps =
+lmtp_header_checks =
+lmtp_host_lookup = dns
+lmtp_initial_destination_concurrency = $initial_destination_concurrency
+lmtp_lhlo_name = $myhostname
+lmtp_lhlo_timeout = 300s
+lmtp_line_length_limit = 998
+lmtp_mail_timeout = 300s
+lmtp_mime_header_checks =
+lmtp_minimum_delivery_slots = $default_minimum_delivery_slots
+lmtp_mx_address_limit = 5
+lmtp_mx_session_limit = 2
+lmtp_nested_header_checks =
+lmtp_per_record_deadline = no
+lmtp_pix_workaround_delay_time = 10s
+lmtp_pix_workaround_maps =
+lmtp_pix_workaround_threshold_time = 500s
+lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
+lmtp_quit_timeout = 300s
+lmtp_quote_rfc821_envelope = yes
+lmtp_randomize_addresses = yes
+lmtp_rcpt_timeout = 300s
+lmtp_recipient_limit = $default_recipient_limit
+lmtp_recipient_refill_delay = $default_recipient_refill_delay
+lmtp_recipient_refill_limit = $default_recipient_refill_limit
+lmtp_reply_filter =
+lmtp_rset_timeout = 20s
+lmtp_sasl_auth_cache_name =
+lmtp_sasl_auth_cache_time = 90d
+lmtp_sasl_auth_enable = no
+lmtp_sasl_auth_soft_bounce = yes
+lmtp_sasl_mechanism_filter =
+lmtp_sasl_password_maps =
+lmtp_sasl_path =
+lmtp_sasl_security_options = noplaintext, noanonymous
+lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
+lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
+lmtp_sasl_type = cyrus
+lmtp_send_dummy_mail_auth = no
+lmtp_send_xforward_command = no
+lmtp_sender_dependent_authentication = no
+lmtp_skip_5xx_greeting = yes
+lmtp_skip_quit_response = no
+lmtp_starttls_timeout = 300s
+lmtp_tcp_port = 24
+lmtp_tls_CAfile =
+lmtp_tls_CApath =
+lmtp_tls_block_early_mail_reply = no
+lmtp_tls_cert_file =
+lmtp_tls_ciphers = medium
+lmtp_tls_dcert_file =
+lmtp_tls_dkey_file = $lmtp_tls_dcert_file
+lmtp_tls_eccert_file =
+lmtp_tls_eckey_file = $lmtp_tls_eccert_file
+lmtp_tls_enforce_peername = yes
+lmtp_tls_exclude_ciphers =
+lmtp_tls_fingerprint_cert_match =
+lmtp_tls_fingerprint_digest = md5
+lmtp_tls_force_insecure_host_tlsa_lookup = no
+lmtp_tls_key_file = $lmtp_tls_cert_file
+lmtp_tls_loglevel = 0
+lmtp_tls_mandatory_ciphers = medium
+lmtp_tls_mandatory_exclude_ciphers =
+lmtp_tls_mandatory_protocols = !SSLv2, !SSLv3
+lmtp_tls_note_starttls_offer = no
+lmtp_tls_per_site =
+lmtp_tls_policy_maps =
+lmtp_tls_protocols = !SSLv2, !SSLv3
+lmtp_tls_scert_verifydepth = 9
+lmtp_tls_secure_cert_match = nexthop
+lmtp_tls_security_level =
+lmtp_tls_session_cache_database =
+lmtp_tls_session_cache_timeout = 3600s
+lmtp_tls_trust_anchor_file =
+lmtp_tls_verify_cert_match = hostname
+lmtp_tls_wrappermode = no
+lmtp_use_tls = no
+lmtp_xforward_timeout = 300s
+local_command_shell =
+local_delivery_slot_cost = $default_delivery_slot_cost
+local_delivery_slot_discount = $default_delivery_slot_discount
+local_delivery_slot_loan = $default_delivery_slot_loan
+local_delivery_status_filter = $default_delivery_status_filter
+local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+local_destination_concurrency_limit = 2
+local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+local_destination_rate_delay = $default_destination_rate_delay
+local_destination_recipient_limit = 1
+local_extra_recipient_limit = $default_extra_recipient_limit
+local_header_rewrite_clients = permit_inet_interfaces
+local_initial_destination_concurrency = $initial_destination_concurrency
+local_minimum_delivery_slots = $default_minimum_delivery_slots
+local_recipient_limit = $default_recipient_limit
+local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+local_recipient_refill_delay = $default_recipient_refill_delay
+local_recipient_refill_limit = $default_recipient_refill_limit
+local_transport = local:$myhostname
+luser_relay =
+mail_name = Postfix
+mail_owner = postfix
+mail_release_date = 20151010
+mail_spool_directory = /var/mail
+mail_version = 3.0.3
+mailbox_command =
+mailbox_command_maps =
+mailbox_delivery_lock = fcntl, dotlock
+mailbox_size_limit = 51200000
+mailbox_transport =
+mailbox_transport_maps =
+mailq_path = /usr/bin/mailq
+manpage_directory = /usr/local/man
+maps_rbl_domains =
+maps_rbl_reject_code = 554
+masquerade_classes = envelope_sender, header_sender, header_recipient
+masquerade_domains =
+masquerade_exceptions =
+master_service_disable =
+max_idle = 100s
+max_use = 100
+maximal_backoff_time = 4000s
+maximal_queue_lifetime = 5d
+message_drop_headers = bcc, content-length, resent-bcc, return-path
+message_reject_characters =
+message_size_limit = 10240000
+message_strip_characters =
+meta_directory = /etc/postfix
+milter_command_timeout = 30s
+milter_connect_macros = j {daemon_name} v
+milter_connect_timeout = 30s
+milter_content_timeout = 300s
+milter_data_macros = i
+milter_default_action = tempfail
+milter_end_of_data_macros = i
+milter_end_of_header_macros = i
+milter_header_checks =
+milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
+milter_macro_daemon_name = $myhostname
+milter_macro_v = $mail_name $mail_version
+milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr} {mail_host} {mail_mailer}
+milter_protocol = 6
+milter_rcpt_macros = i {rcpt_addr} {rcpt_host} {rcpt_mailer}
+milter_unknown_command_macros =
+mime_boundary_length_limit = 2048
+mime_header_checks = $header_checks
+mime_nesting_limit = 100
+minimal_backoff_time = 300s
+multi_instance_directories =
+multi_instance_enable = no
+multi_instance_group =
+multi_instance_name =
+multi_instance_wrapper =
+multi_recipient_bounce_reject_code = 550
+mydestination = $myhostname, localhost.$mydomain, localhost
+mynetworks_style = ${{$compatibility_level} < {2} ? {subnet} : {host}}
+myorigin = $myhostname
+nested_header_checks = $header_checks
+newaliases_path = /usr/bin/newaliases
+non_fqdn_reject_code = 504
+non_smtpd_milters =
+notify_classes = resource, software
+owner_request_special = yes
+parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_authorized_clients,relay_domains,smtpd_access_maps
+permit_mx_backup_networks =
+pickup_service_name = pickup
+pipe_delivery_status_filter = $default_delivery_status_filter
+plaintext_reject_code = 450
+postmulti_control_commands = reload flush
+postmulti_start_commands = start
+postmulti_stop_commands = stop abort drain quick-stop
+postscreen_access_list = permit_mynetworks
+postscreen_bare_newline_action = ignore
+postscreen_bare_newline_enable = no
+postscreen_bare_newline_ttl = 30d
+postscreen_blacklist_action = ignore
+postscreen_cache_cleanup_interval = 12h
+postscreen_cache_map = btree:$data_directory/postscreen_cache
+postscreen_cache_retention_time = 7d
+postscreen_client_connection_count_limit = $smtpd_client_connection_count_limit
+postscreen_command_count_limit = 20
+postscreen_command_filter =
+postscreen_command_time_limit = ${stress?{10}:{300}}s
+postscreen_disable_vrfy_command = $disable_vrfy_command
+postscreen_discard_ehlo_keyword_address_maps = $smtpd_discard_ehlo_keyword_address_maps
+postscreen_discard_ehlo_keywords = $smtpd_discard_ehlo_keywords
+postscreen_dnsbl_action = ignore
+postscreen_dnsbl_reply_map =
+postscreen_dnsbl_sites =
+postscreen_dnsbl_threshold = 1
+postscreen_dnsbl_timeout = 10s
+postscreen_dnsbl_ttl = 1h
+postscreen_dnsbl_whitelist_threshold = 0
+postscreen_enforce_tls = $smtpd_enforce_tls
+postscreen_expansion_filter = $smtpd_expansion_filter
+postscreen_forbidden_commands = $smtpd_forbidden_commands
+postscreen_greet_action = ignore
+postscreen_greet_banner = $smtpd_banner
+postscreen_greet_ttl = 1d
+postscreen_greet_wait = ${stress?{2}:{6}}s
+postscreen_helo_required = $smtpd_helo_required
+postscreen_non_smtp_command_action = drop
+postscreen_non_smtp_command_enable = no
+postscreen_non_smtp_command_ttl = 30d
+postscreen_pipelining_action = enforce
+postscreen_pipelining_enable = no
+postscreen_pipelining_ttl = 30d
+postscreen_post_queue_limit = $default_process_limit
+postscreen_pre_queue_limit = $default_process_limit
+postscreen_reject_footer = $smtpd_reject_footer
+postscreen_tls_security_level = $smtpd_tls_security_level
+postscreen_upstream_proxy_protocol =
+postscreen_upstream_proxy_timeout = 5s
+postscreen_use_tls = $smtpd_use_tls
+postscreen_watchdog_timeout = 10s
+postscreen_whitelist_interfaces = static:all
+prepend_delivered_header = command, file, forward
+process_id_directory = pid
+propagate_unmatched_extensions = canonical, virtual
+proxy_interfaces =
+proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $smtpd_sender_login_maps $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps $alias_maps $smtpd_client_restrictions $smtpd_helo_restrictions $smtpd_sender_restrictions $smtpd_relay_restrictions $smtpd_recipient_restrictions
+proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name $address_verify_map $postscreen_cache_map
+proxymap_service_name = proxymap
+proxywrite_service_name = proxywrite
+qmgr_clog_warn_time = 300s
+qmgr_daemon_timeout = 1000s
+qmgr_fudge_factor = 100
+qmgr_ipc_timeout = 60s
+qmgr_message_active_limit = 20000
+qmgr_message_recipient_limit = 20000
+qmgr_message_recipient_minimum = 10
+qmqpd_authorized_clients =
+qmqpd_client_port_logging = no
+qmqpd_error_delay = 1s
+qmqpd_timeout = 300s
+queue_directory = /var/spool/postfix
+queue_file_attribute_count_limit = 100
+queue_minfree = 0
+queue_run_delay = 300s
+queue_service_name = qmgr
+rbl_reply_maps =
+readme_directory = no
+receive_override_options =
+recipient_bcc_maps =
+recipient_canonical_classes = envelope_recipient, header_recipient
+recipient_canonical_maps =
+recipient_delimiter =
+reject_code = 554
+reject_tempfail_action = defer_if_permit
+relay_clientcerts =
+relay_delivery_slot_cost = $default_delivery_slot_cost
+relay_delivery_slot_discount = $default_delivery_slot_discount
+relay_delivery_slot_loan = $default_delivery_slot_loan
+relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+relay_destination_concurrency_limit = $default_destination_concurrency_limit
+relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+relay_destination_rate_delay = $default_destination_rate_delay
+relay_destination_recipient_limit = $default_destination_recipient_limit
+relay_domains = ${{$compatibility_level} < {2} ? {$mydestination} : {}}
+relay_domains_reject_code = 554
+relay_extra_recipient_limit = $default_extra_recipient_limit
+relay_initial_destination_concurrency = $initial_destination_concurrency
+relay_minimum_delivery_slots = $default_minimum_delivery_slots
+relay_recipient_limit = $default_recipient_limit
+relay_recipient_maps =
+relay_recipient_refill_delay = $default_recipient_refill_delay
+relay_recipient_refill_limit = $default_recipient_refill_limit
+relay_transport = relay
+relayhost =
+relocated_maps =
+remote_header_rewrite_domain =
+require_home_directory = no
+reset_owner_alias = no
+resolve_dequoted_address = yes
+resolve_null_domain = no
+resolve_numeric_domain = no
+retry_delivery_slot_cost = $default_delivery_slot_cost
+retry_delivery_slot_discount = $default_delivery_slot_discount
+retry_delivery_slot_loan = $default_delivery_slot_loan
+retry_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+retry_destination_concurrency_limit = $default_destination_concurrency_limit
+retry_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+retry_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+retry_destination_rate_delay = $default_destination_rate_delay
+retry_destination_recipient_limit = $default_destination_recipient_limit
+retry_extra_recipient_limit = $default_extra_recipient_limit
+retry_initial_destination_concurrency = $initial_destination_concurrency
+retry_minimum_delivery_slots = $default_minimum_delivery_slots
+retry_recipient_limit = $default_recipient_limit
+retry_recipient_refill_delay = $default_recipient_refill_delay
+retry_recipient_refill_limit = $default_recipient_refill_limit
+rewrite_service_name = rewrite
+sample_directory = /etc/postfix
+send_cyrus_sasl_authzid = no
+sender_bcc_maps =
+sender_canonical_classes = envelope_sender, header_sender
+sender_canonical_maps =
+sender_dependent_default_transport_maps =
+sender_dependent_relayhost_maps =
+sendmail_fix_line_endings = always
+sendmail_path = /usr/sbin/sendmail
+service_throttle_time = 60s
+setgid_group = postdrop
+shlib_directory = /usr/lib64/postfix/${mail_version}
+show_user_unknown_table_name = yes
+showq_service_name = showq
+smtp_address_preference = any
+smtp_address_verify_target = rcpt
+smtp_always_send_ehlo = yes
+smtp_bind_address =
+smtp_bind_address6 =
+smtp_body_checks =
+smtp_cname_overrides_servername = no
+smtp_connect_timeout = 30s
+smtp_connection_cache_destinations =
+smtp_connection_cache_on_demand = yes
+smtp_connection_cache_time_limit = 2s
+smtp_connection_reuse_count_limit = 0
+smtp_connection_reuse_time_limit = 300s
+smtp_data_done_timeout = 600s
+smtp_data_init_timeout = 120s
+smtp_data_xfer_timeout = 180s
+smtp_defer_if_no_mx_address_found = no
+smtp_delivery_slot_cost = $default_delivery_slot_cost
+smtp_delivery_slot_discount = $default_delivery_slot_discount
+smtp_delivery_slot_loan = $default_delivery_slot_loan
+smtp_delivery_status_filter = $default_delivery_status_filter
+smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+smtp_destination_concurrency_limit = $default_destination_concurrency_limit
+smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+smtp_destination_rate_delay = $default_destination_rate_delay
+smtp_destination_recipient_limit = $default_destination_recipient_limit
+smtp_discard_ehlo_keyword_address_maps =
+smtp_discard_ehlo_keywords =
+smtp_dns_reply_filter =
+smtp_dns_resolver_options =
+smtp_dns_support_level =
+smtp_enforce_tls = no
+smtp_extra_recipient_limit = $default_extra_recipient_limit
+smtp_fallback_relay = $fallback_relay
+smtp_generic_maps =
+smtp_header_checks =
+smtp_helo_name = $myhostname
+smtp_helo_timeout = 300s
+smtp_host_lookup = dns
+smtp_initial_destination_concurrency = $initial_destination_concurrency
+smtp_line_length_limit = 998
+smtp_mail_timeout = 300s
+smtp_mime_header_checks =
+smtp_minimum_delivery_slots = $default_minimum_delivery_slots
+smtp_mx_address_limit = 5
+smtp_mx_session_limit = 2
+smtp_nested_header_checks =
+smtp_never_send_ehlo = no
+smtp_per_record_deadline = no
+smtp_pix_workaround_delay_time = 10s
+smtp_pix_workaround_maps =
+smtp_pix_workaround_threshold_time = 500s
+smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
+smtp_quit_timeout = 300s
+smtp_quote_rfc821_envelope = yes
+smtp_randomize_addresses = yes
+smtp_rcpt_timeout = 300s
+smtp_recipient_limit = $default_recipient_limit
+smtp_recipient_refill_delay = $default_recipient_refill_delay
+smtp_recipient_refill_limit = $default_recipient_refill_limit
+smtp_reply_filter =
+smtp_rset_timeout = 20s
+smtp_sasl_auth_cache_name =
+smtp_sasl_auth_cache_time = 90d
+smtp_sasl_auth_enable = no
+smtp_sasl_auth_soft_bounce = yes
+smtp_sasl_mechanism_filter =
+smtp_sasl_password_maps =
+smtp_sasl_path =
+smtp_sasl_security_options = noplaintext, noanonymous
+smtp_sasl_tls_security_options = $smtp_sasl_security_options
+smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
+smtp_sasl_type = cyrus
+smtp_send_dummy_mail_auth = no
+smtp_send_xforward_command = no
+smtp_sender_dependent_authentication = no
+smtp_skip_5xx_greeting = yes
+smtp_skip_quit_response = yes
+smtp_starttls_timeout = 300s
+smtp_tls_CAfile =
+smtp_tls_CApath =
+smtp_tls_block_early_mail_reply = no
+smtp_tls_cert_file =
+smtp_tls_ciphers = medium
+smtp_tls_dcert_file =
+smtp_tls_dkey_file = $smtp_tls_dcert_file
+smtp_tls_eccert_file =
+smtp_tls_eckey_file = $smtp_tls_eccert_file
+smtp_tls_enforce_peername = yes
+smtp_tls_exclude_ciphers =
+smtp_tls_fingerprint_cert_match =
+smtp_tls_fingerprint_digest = md5
+smtp_tls_force_insecure_host_tlsa_lookup = no
+smtp_tls_key_file = $smtp_tls_cert_file
+smtp_tls_loglevel = 0
+smtp_tls_mandatory_ciphers = medium
+smtp_tls_mandatory_exclude_ciphers =
+smtp_tls_mandatory_protocols = !SSLv2, !SSLv3
+smtp_tls_note_starttls_offer = no
+smtp_tls_per_site =
+smtp_tls_policy_maps =
+smtp_tls_protocols = !SSLv2, !SSLv3
+smtp_tls_scert_verifydepth = 9
+smtp_tls_secure_cert_match = nexthop, dot-nexthop
+smtp_tls_security_level =
+smtp_tls_session_cache_database =
+smtp_tls_session_cache_timeout = 3600s
+smtp_tls_trust_anchor_file =
+smtp_tls_verify_cert_match = hostname
+smtp_tls_wrappermode = no
+smtp_use_tls = no
+smtp_xforward_timeout = 300s
+smtpd_authorized_verp_clients = $authorized_verp_clients
+smtpd_authorized_xclient_hosts =
+smtpd_authorized_xforward_hosts =
+smtpd_banner = $myhostname ESMTP $mail_name
+smtpd_client_connection_count_limit = 50
+smtpd_client_connection_rate_limit = 0
+smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
+smtpd_client_message_rate_limit = 0
+smtpd_client_new_tls_session_rate_limit = 0
+smtpd_client_port_logging = no
+smtpd_client_recipient_rate_limit = 0
+smtpd_client_restrictions =
+smtpd_command_filter =
+smtpd_data_restrictions =
+smtpd_delay_open_until_valid_rcpt = yes
+smtpd_delay_reject = yes
+smtpd_discard_ehlo_keyword_address_maps =
+smtpd_discard_ehlo_keywords =
+smtpd_dns_reply_filter =
+smtpd_end_of_data_restrictions =
+smtpd_enforce_tls = no
+smtpd_error_sleep_time = 1s
+smtpd_etrn_restrictions =
+smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~
+smtpd_forbidden_commands = CONNECT GET POST
+smtpd_hard_error_limit = ${stress?{1}:{20}}
+smtpd_helo_required = no
+smtpd_helo_restrictions =
+smtpd_history_flush_threshold = 100
+smtpd_junk_command_limit = ${stress?{1}:{100}}
+smtpd_log_access_permit_actions =
+smtpd_milters =
+smtpd_noop_commands =
+smtpd_null_access_lookup_key = <>
+smtpd_peername_lookup = yes
+smtpd_per_record_deadline = ${stress?{yes}:{no}}
+smtpd_policy_service_default_action = 451 4.3.5 Server configuration problem
+smtpd_policy_service_max_idle = 300s
+smtpd_policy_service_max_ttl = 1000s
+smtpd_policy_service_request_limit = 0
+smtpd_policy_service_retry_delay = 1s
+smtpd_policy_service_timeout = 100s
+smtpd_policy_service_try_limit = 2
+smtpd_proxy_ehlo = $myhostname
+smtpd_proxy_filter =
+smtpd_proxy_options =
+smtpd_proxy_timeout = 100s
+smtpd_recipient_limit = 1000
+smtpd_recipient_overshoot_limit = 1000
+smtpd_recipient_restrictions =
+smtpd_reject_footer =
+smtpd_reject_unlisted_recipient = yes
+smtpd_reject_unlisted_sender = no
+smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, defer_unauth_destination
+smtpd_restriction_classes =
+smtpd_sasl_auth_enable = no
+smtpd_sasl_authenticated_header = no
+smtpd_sasl_exceptions_networks =
+smtpd_sasl_local_domain =
+smtpd_sasl_path = smtpd
+smtpd_sasl_security_options = noanonymous
+smtpd_sasl_service = smtp
+smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
+smtpd_sasl_type = cyrus
+smtpd_sender_login_maps =
+smtpd_sender_restrictions =
+smtpd_service_name = smtpd
+smtpd_soft_error_limit = 10
+smtpd_starttls_timeout = ${stress?{10}:{300}}s
+smtpd_timeout = ${stress?{10}:{300}}s
+smtpd_tls_CAfile =
+smtpd_tls_CApath =
+smtpd_tls_always_issue_session_ids = yes
+smtpd_tls_ask_ccert = no
+smtpd_tls_auth_only = no
+smtpd_tls_ccert_verifydepth = 9
+smtpd_tls_cert_file =
+smtpd_tls_ciphers = medium
+smtpd_tls_dcert_file =
+smtpd_tls_dh1024_param_file =
+smtpd_tls_dh512_param_file =
+smtpd_tls_dkey_file = $smtpd_tls_dcert_file
+smtpd_tls_eccert_file =
+smtpd_tls_eckey_file = $smtpd_tls_eccert_file
+smtpd_tls_eecdh_grade = strong
+smtpd_tls_exclude_ciphers =
+smtpd_tls_fingerprint_digest = md5
+smtpd_tls_key_file = $smtpd_tls_cert_file
+smtpd_tls_loglevel = 0
+smtpd_tls_mandatory_ciphers = medium
+smtpd_tls_mandatory_exclude_ciphers =
+smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3
+smtpd_tls_protocols = !SSLv2, !SSLv3
+smtpd_tls_received_header = no
+smtpd_tls_req_ccert = no
+smtpd_tls_security_level =
+smtpd_tls_session_cache_database =
+smtpd_tls_session_cache_timeout = 3600s
+smtpd_tls_wrappermode = no
+smtpd_upstream_proxy_protocol =
+smtpd_upstream_proxy_timeout = 5s
+smtpd_use_tls = no
+smtputf8_autodetect_classes = sendmail, verify
+smtputf8_enable = ${{$compatibility_level} < {1} ? {no} : {yes}}
+soft_bounce = no
+stale_lock_time = 500s
+stress =
+strict_7bit_headers = no
+strict_8bitmime = no
+strict_8bitmime_body = no
+strict_mailbox_ownership = yes
+strict_mime_encoding_domain = no
+strict_rfc821_envelopes = no
+strict_smtputf8 = no
+sun_mailtool_compatibility = no
+swap_bangpath = yes
+syslog_facility = mail
+syslog_name = ${multi_instance_name?{$multi_instance_name}:{postfix}}
+tcp_windowsize = 0
+tls_append_default_CA = no
+tls_daemon_random_bytes = 32
+tls_dane_digest_agility = on
+tls_dane_digests = sha512 sha256
+tls_dane_trust_anchor_digest_enable = yes
+tls_disable_workarounds =
+tls_eecdh_strong_curve = prime256v1
+tls_eecdh_ultra_curve = secp384r1
+tls_export_cipherlist = aNULL:-aNULL:ALL:+RC4:@STRENGTH
+tls_high_cipherlist = aNULL:-aNULL:ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
+tls_legacy_public_key_fingerprints = no
+tls_low_cipherlist = aNULL:-aNULL:ALL:!EXPORT:+RC4:@STRENGTH
+tls_medium_cipherlist = aNULL:-aNULL:ALL:!EXPORT:!LOW:+RC4:@STRENGTH
+tls_null_cipherlist = eNULL:!aNULL
+tls_preempt_cipherlist = no
+tls_random_bytes = 32
+tls_random_exchange_name = ${data_directory}/prng_exch
+tls_random_prng_update_period = 3600s
+tls_random_reseed_period = 3600s
+tls_random_source = dev:/dev/urandom
+tls_session_ticket_cipher = aes-128-cbc
+tls_ssl_options =
+tls_wildcard_matches_multiple_labels = yes
+tlsmgr_service_name = tlsmgr
+tlsproxy_enforce_tls = $smtpd_enforce_tls
+tlsproxy_service_name = tlsproxy
+tlsproxy_tls_CAfile = $smtpd_tls_CAfile
+tlsproxy_tls_CApath = $smtpd_tls_CApath
+tlsproxy_tls_always_issue_session_ids = $smtpd_tls_always_issue_session_ids
+tlsproxy_tls_ask_ccert = $smtpd_tls_ask_ccert
+tlsproxy_tls_ccert_verifydepth = $smtpd_tls_ccert_verifydepth
+tlsproxy_tls_cert_file = $smtpd_tls_cert_file
+tlsproxy_tls_ciphers = $smtpd_tls_ciphers
+tlsproxy_tls_dcert_file = $smtpd_tls_dcert_file
+tlsproxy_tls_dh1024_param_file = $smtpd_tls_dh1024_param_file
+tlsproxy_tls_dh512_param_file = $smtpd_tls_dh512_param_file
+tlsproxy_tls_dkey_file = $smtpd_tls_dkey_file
+tlsproxy_tls_eccert_file = $smtpd_tls_eccert_file
+tlsproxy_tls_eckey_file = $smtpd_tls_eckey_file
+tlsproxy_tls_eecdh_grade = $smtpd_tls_eecdh_grade
+tlsproxy_tls_exclude_ciphers = $smtpd_tls_exclude_ciphers
+tlsproxy_tls_fingerprint_digest = $smtpd_tls_fingerprint_digest
+tlsproxy_tls_key_file = $smtpd_tls_key_file
+tlsproxy_tls_loglevel = $smtpd_tls_loglevel
+tlsproxy_tls_mandatory_ciphers = $smtpd_tls_mandatory_ciphers
+tlsproxy_tls_mandatory_exclude_ciphers = $smtpd_tls_mandatory_exclude_ciphers
+tlsproxy_tls_mandatory_protocols = $smtpd_tls_mandatory_protocols
+tlsproxy_tls_protocols = $smtpd_tls_protocols
+tlsproxy_tls_req_ccert = $smtpd_tls_req_ccert
+tlsproxy_tls_security_level = $smtpd_tls_security_level
+tlsproxy_use_tls = $smtpd_use_tls
+tlsproxy_watchdog_timeout = 10s
+trace_service_name = trace
+transport_maps =
+transport_retry_time = 60s
+trigger_timeout = 10s
+undisclosed_recipients_header =
+unknown_address_reject_code = 450
+unknown_address_tempfail_action = $reject_tempfail_action
+unknown_client_reject_code = 450
+unknown_helo_hostname_tempfail_action = $reject_tempfail_action
+unknown_hostname_reject_code = 450
+unknown_local_recipient_reject_code = 550
+unknown_relay_recipient_reject_code = 550
+unknown_virtual_alias_reject_code = 550
+unknown_virtual_mailbox_reject_code = 550
+unverified_recipient_defer_code = 450
+unverified_recipient_reject_code = 450
+unverified_recipient_reject_reason =
+unverified_recipient_tempfail_action = $reject_tempfail_action
+unverified_sender_defer_code = 450
+unverified_sender_reject_code = 450
+unverified_sender_reject_reason =
+unverified_sender_tempfail_action = $reject_tempfail_action
+verp_delimiter_filter = -=+
+virtual_alias_address_length_limit = 1000
+virtual_alias_domains = $virtual_alias_maps
+virtual_alias_expansion_limit = 1000
+virtual_alias_maps = $virtual_maps
+virtual_alias_recursion_limit = 1000
+virtual_delivery_slot_cost = $default_delivery_slot_cost
+virtual_delivery_slot_discount = $default_delivery_slot_discount
+virtual_delivery_slot_loan = $default_delivery_slot_loan
+virtual_delivery_status_filter = $default_delivery_status_filter
+virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+virtual_destination_concurrency_limit = $default_destination_concurrency_limit
+virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+virtual_destination_rate_delay = $default_destination_rate_delay
+virtual_destination_recipient_limit = $default_destination_recipient_limit
+virtual_extra_recipient_limit = $default_extra_recipient_limit
+virtual_gid_maps =
+virtual_initial_destination_concurrency = $initial_destination_concurrency
+virtual_mailbox_base =
+virtual_mailbox_domains = $virtual_mailbox_maps
+virtual_mailbox_limit = 51200000
+virtual_mailbox_lock = fcntl, dotlock
+virtual_mailbox_maps =
+virtual_minimum_delivery_slots = $default_minimum_delivery_slots
+virtual_minimum_uid = 100
+virtual_recipient_limit = $default_recipient_limit
+virtual_recipient_refill_delay = $default_recipient_refill_delay
+virtual_recipient_refill_limit = $default_recipient_refill_limit
+virtual_transport = virtual
+virtual_uid_maps =
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.2/html
+html_directory = /usr/share/doc/postfix-3.0.3-r1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.2/readme
+readme_directory = /usr/share/doc/postfix-3.0.3-r1/readme
inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
# Subscription configuration file for CUPS v2.0.3
-# Written by cupsd on 2016-02-09 19:42
+# Written by cupsd on 2016-02-10 08:45
NextSubscriptionId 248
<Subscription 246>
Events all
Recipient dbus://
LeaseDuration 86400
Interval 0
-ExpirationTime 1455090330
+ExpirationTime 1455176670
NextEventId 177
</Subscription>
# html_directory: The location of the Postfix HTML documentation.
#
-html_directory = /usr/share/doc/postfix-3.0.2/html
+html_directory = /usr/share/doc/postfix-3.0.3-r1/html
# manpage_directory: The location of the Postfix on-line manual pages.
#
# readme_directory: The location of the Postfix README files.
#
-readme_directory = /usr/share/doc/postfix-3.0.2/readme
+readme_directory = /usr/share/doc/postfix-3.0.3-r1/readme
+
# inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib64/postfix/${mail_version}
-# Global Postfix configuration file. This file lists only a subset
-# of all parameters. For the syntax, and for a complete parameter
-# list, see the postconf(5) manual page (command: "man 5 postconf").
-#
-# For common configuration examples, see BASIC_CONFIGURATION_README
-# and STANDARD_CONFIGURATION_README. To find these documents, use
-# the command "postconf html_directory readme_directory", or go to
-# http://www.postfix.org/.
-#
-# For best results, change no more than 2-3 parameters at a time,
-# and test if Postfix still works after every change.
-
-# SOFT BOUNCE
-#
-# The soft_bounce parameter provides a limited safety net for
-# testing. When soft_bounce is enabled, mail will remain queued that
-# would otherwise bounce. This parameter disables locally-generated
-# bounces, and prevents the SMTP server from rejecting mail permanently
-# (by changing 5xx replies into 4xx replies). However, soft_bounce
-# is no cure for address rewriting mistakes or mail routing mistakes.
-#
-#soft_bounce = no
-
-# LOCAL PATHNAME INFORMATION
-#
-# The queue_directory specifies the location of the Postfix queue.
-# This is also the root directory of Postfix daemons that run chrooted.
-# See the files in examples/chroot-setup for setting up Postfix chroot
-# environments on different UNIX systems.
-#
-queue_directory = /var/spool/postfix
-
-# The command_directory parameter specifies the location of all
-# postXXX commands.
-#
+# DO NOT EDIT THIS FILE. EDIT THE MAIN.CF FILE INSTEAD. THE
+# TEXT HERE JUST SHOWS DEFAULT SETTINGS BUILT INTO POSTFIX.
+#
+2bounce_notice_recipient = postmaster
+access_map_defer_code = 450
+access_map_reject_code = 554
+address_verify_cache_cleanup_interval = 12h
+address_verify_default_transport = $default_transport
+address_verify_local_transport = $local_transport
+address_verify_map = btree:$data_directory/verify_cache
+address_verify_negative_cache = yes
+address_verify_negative_expire_time = 3d
+address_verify_negative_refresh_time = 3h
+address_verify_poll_count = ${stress?{1}:{3}}
+address_verify_poll_delay = 3s
+address_verify_positive_expire_time = 31d
+address_verify_positive_refresh_time = 7d
+address_verify_relay_transport = $relay_transport
+address_verify_relayhost = $relayhost
+address_verify_sender = $double_bounce_sender
+address_verify_sender_dependent_default_transport_maps = $sender_dependent_default_transport_maps
+address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
+address_verify_sender_ttl = 0s
+address_verify_service_name = verify
+address_verify_transport_maps = $transport_maps
+address_verify_virtual_transport = $virtual_transport
+alias_database = hash:/etc/mail/aliases
+alias_maps = hash:/etc/mail/aliases, nis:mail.aliases
+allow_mail_to_commands = alias, forward
+allow_mail_to_files = alias, forward
+allow_min_user = no
+allow_percent_hack = yes
+allow_untrusted_routing = no
+alternate_config_directories =
+always_add_missing_headers = no
+always_bcc =
+anvil_rate_time_unit = 60s
+anvil_status_update_time = 600s
+append_at_myorigin = yes
+append_dot_mydomain = ${{$compatibility_level} < {1} ? {yes} : {no}}
+application_event_drain_time = 100s
+authorized_flush_users = static:anyone
+authorized_mailq_users = static:anyone
+authorized_submit_users = static:anyone
+backwards_bounce_logfile_compatibility = yes
+berkeley_db_create_buffer_size = 16777216
+berkeley_db_read_buffer_size = 131072
+best_mx_transport =
+biff = yes
+body_checks =
+body_checks_size_limit = 51200
+bounce_notice_recipient = postmaster
+bounce_queue_lifetime = 5d
+bounce_service_name = bounce
+bounce_size_limit = 50000
+bounce_template_file =
+broken_sasl_auth_clients = no
+canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
+canonical_maps =
+cleanup_service_name = cleanup
command_directory = /usr/sbin
-
-# The daemon_directory parameter specifies the location of all Postfix
-# daemon programs (i.e. programs listed in the master.cf file). This
-# directory must be owned by root.
-#
-daemon_directory = /usr/lib64/postfix
-
-# The data_directory parameter specifies the location of Postfix-writable
-# data files (caches, random numbers). This directory must be owned
-# by the mail_owner account (see below).
-#
+command_execution_directory =
+command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
+command_time_limit = 1000s
+compatibility_level = 0
+config_directory = /etc/postfix
+confirm_delay_cleared = no
+connection_cache_protocol_timeout = 5s
+connection_cache_service_name = scache
+connection_cache_status_update_time = 600s
+connection_cache_ttl_limit = 2s
+content_filter =
+cyrus_sasl_config_path =
+daemon_directory = /usr/libexec/postfix
+daemon_table_open_error_is_fatal = no
+daemon_timeout = 18000s
data_directory = /var/lib/postfix
-
-# QUEUE AND PROCESS OWNERSHIP
-#
-# The mail_owner parameter specifies the owner of the Postfix queue
-# and of most Postfix daemon processes. Specify the name of a user
-# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
-# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
-# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
-# USER.
-#
-mail_owner = postfix
-
-# The default_privs parameter specifies the default rights used by
-# the local delivery agent for delivery to external file or command.
-# These rights are used in the absence of a recipient user context.
-# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
-#
-#default_privs = nobody
-
-# INTERNET HOST AND DOMAIN NAMES
-#
-# The myhostname parameter specifies the internet hostname of this
-# mail system. The default is to use the fully-qualified domain name
-# from gethostname(). $myhostname is used as a default value for many
-# other configuration parameters.
-#
-#myhostname = host.domain.tld
-#myhostname = virtual.domain.tld
-
-# The mydomain parameter specifies the local internet domain name.
-# The default is to use $myhostname minus the first component.
-# $mydomain is used as a default value for many other configuration
-# parameters.
-#
-#mydomain = domain.tld
-
-# SENDING MAIL
-#
-# The myorigin parameter specifies the domain that locally-posted
-# mail appears to come from. The default is to append $myhostname,
-# which is fine for small sites. If you run a domain with multiple
-# machines, you should (1) change this to $mydomain and (2) set up
-# a domain-wide alias database that aliases each user to
-# user@that.users.mailhost.
-#
-# For the sake of consistency between sender and recipient addresses,
-# myorigin also specifies the default domain name that is appended
-# to recipient addresses that have no @domain part.
-#
-#myorigin = $myhostname
-#myorigin = $mydomain
-
-# RECEIVING MAIL
-
-# The inet_interfaces parameter specifies the network interface
-# addresses that this mail system receives mail on. By default,
-# the software claims all active interfaces on the machine. The
-# parameter also controls delivery of mail to user@[ip.address].
-#
-# See also the proxy_interfaces parameter, for network addresses that
-# are forwarded to us via a proxy or network address translator.
-#
-# Note: you need to stop/start Postfix when this parameter changes.
-#
-#inet_interfaces = all
-#inet_interfaces = $myhostname
-#inet_interfaces = $myhostname, localhost
-
-# The proxy_interfaces parameter specifies the network interface
-# addresses that this mail system receives mail on by way of a
-# proxy or network address translation unit. This setting extends
-# the address list specified with the inet_interfaces parameter.
-#
-# You must specify your proxy/NAT addresses when your system is a
-# backup MX host for other domains, otherwise mail delivery loops
-# will happen when the primary MX host is down.
-#
-#proxy_interfaces =
-#proxy_interfaces = 1.2.3.4
-
-# The mydestination parameter specifies the list of domains that this
-# machine considers itself the final destination for.
-#
-# These domains are routed to the delivery agent specified with the
-# local_transport parameter setting. By default, that is the UNIX
-# compatible delivery agent that lookups all recipients in /etc/passwd
-# and /etc/aliases or their equivalent.
-#
-# The default is $myhostname + localhost.$mydomain. On a mail domain
-# gateway, you should also include $mydomain.
-#
-# Do not specify the names of virtual domains - those domains are
-# specified elsewhere (see VIRTUAL_README).
-#
-# Do not specify the names of domains that this machine is backup MX
-# host for. Specify those names via the relay_domains settings for
-# the SMTP server, or use permit_mx_backup if you are lazy (see
-# STANDARD_CONFIGURATION_README).
-#
-# The local machine is always the final destination for mail addressed
-# to user@[the.net.work.address] of an interface that the mail system
-# receives mail on (see the inet_interfaces parameter).
-#
-# Specify a list of host or domain names, /file/name or type:table
-# patterns, separated by commas and/or whitespace. A /file/name
-# pattern is replaced by its contents; a type:table is matched when
-# a name matches a lookup key (the right-hand side is ignored).
-# Continue long lines by starting the next line with whitespace.
-#
-# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
-#
-#mydestination = $myhostname, localhost.$mydomain, localhost
-#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
-#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
-# mail.$mydomain, www.$mydomain, ftp.$mydomain
-
-# REJECTING MAIL FOR UNKNOWN LOCAL USERS
-#
-# The local_recipient_maps parameter specifies optional lookup tables
-# with all names or addresses of users that are local with respect
-# to $mydestination, $inet_interfaces or $proxy_interfaces.
-#
-# If this parameter is defined, then the SMTP server will reject
-# mail for unknown local users. This parameter is defined by default.
-#
-# To turn off local recipient checking in the SMTP server, specify
-# local_recipient_maps = (i.e. empty).
-#
-# The default setting assumes that you use the default Postfix local
-# delivery agent for local delivery. You need to update the
-# local_recipient_maps setting if:
-#
-# - You define $mydestination domain recipients in files other than
-# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
-# For example, you define $mydestination domain recipients in
-# the $virtual_mailbox_maps files.
-#
-# - You redefine the local delivery agent in master.cf.
-#
-# - You redefine the "local_transport" setting in main.cf.
-#
-# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
-# feature of the Postfix local delivery agent (see local(8)).
-#
-# Details are described in the LOCAL_RECIPIENT_README file.
-#
-# Beware: if the Postfix SMTP server runs chrooted, you probably have
-# to access the passwd file via the proxymap service, in order to
-# overcome chroot restrictions. The alternative, having a copy of
-# the system passwd file in the chroot jail is just not practical.
-#
-# The right-hand side of the lookup tables is conveniently ignored.
-# In the left-hand side, specify a bare username, an @domain.tld
-# wild-card, or specify a user@domain.tld address.
-#
-#local_recipient_maps = unix:passwd.byname $alias_maps
-#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
-#local_recipient_maps =
-
-# The unknown_local_recipient_reject_code specifies the SMTP server
-# response code when a recipient domain matches $mydestination or
-# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
-# and the recipient address or address local-part is not found.
-#
-# The default setting is 550 (reject mail) but it is safer to start
-# with 450 (try again later) until you are certain that your
-# local_recipient_maps settings are OK.
-#
-unknown_local_recipient_reject_code = 550
-
-# TRUST AND RELAY CONTROL
-
-# The mynetworks parameter specifies the list of "trusted" SMTP
-# clients that have more privileges than "strangers".
-#
-# In particular, "trusted" SMTP clients are allowed to relay mail
-# through Postfix. See the smtpd_recipient_restrictions parameter
-# in postconf(5).
-#
-# You can specify the list of "trusted" network addresses by hand
-# or you can let Postfix do it for you (which is the default).
-#
-# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
-# clients in the same IP subnetworks as the local machine.
-# On Linux, this does works correctly only with interfaces specified
-# with the "ifconfig" command.
-#
-# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
-# clients in the same IP class A/B/C networks as the local machine.
-# Don't do this with a dialup site - it would cause Postfix to "trust"
-# your entire provider's network. Instead, specify an explicit
-# mynetworks list by hand, as described below.
-#
-# Specify "mynetworks_style = host" when Postfix should "trust"
-# only the local machine.
-#
-#mynetworks_style = class
-#mynetworks_style = subnet
-#mynetworks_style = host
-
-# Alternatively, you can specify the mynetworks list by hand, in
-# which case Postfix ignores the mynetworks_style setting.
-#
-# Specify an explicit list of network/netmask patterns, where the
-# mask specifies the number of bits in the network part of a host
-# address.
-#
-# You can also specify the absolute pathname of a pattern file instead
-# of listing the patterns here. Specify type:table for table-based lookups
-# (the value on the table right-hand side is not used).
-#
-#mynetworks = 168.100.189.0/28, 127.0.0.0/8
-#mynetworks = $config_directory/mynetworks
-#mynetworks = hash:/etc/postfix/network_table
-
-# The relay_domains parameter restricts what destinations this system will
-# relay mail to. See the smtpd_recipient_restrictions description in
-# postconf(5) for detailed information.
-#
-# By default, Postfix relays mail
-# - from "trusted" clients (IP address matches $mynetworks) to any destination,
-# - from "untrusted" clients to destinations that match $relay_domains or
-# subdomains thereof, except addresses with sender-specified routing.
-# The default relay_domains value is $mydestination.
-#
-# In addition to the above, the Postfix SMTP server by default accepts mail
-# that Postfix is final destination for:
-# - destinations that match $inet_interfaces or $proxy_interfaces,
-# - destinations that match $mydestination
-# - destinations that match $virtual_alias_domains,
-# - destinations that match $virtual_mailbox_domains.
-# These destinations do not need to be listed in $relay_domains.
-#
-# Specify a list of hosts or domains, /file/name patterns or type:name
-# lookup tables, separated by commas and/or whitespace. Continue
-# long lines by starting the next line with whitespace. A file name
-# is replaced by its contents; a type:name table is matched when a
-# (parent) domain appears as lookup key.
-#
-# NOTE: Postfix will not automatically forward mail for domains that
-# list this system as their primary or backup MX host. See the
-# permit_mx_backup restriction description in postconf(5).
-#
-#relay_domains = $mydestination
-
-# INTERNET OR INTRANET
-
-# The relayhost parameter specifies the default host to send mail to
-# when no entry is matched in the optional transport(5) table. When
-# no relayhost is given, mail is routed directly to the destination.
-#
-# On an intranet, specify the organizational domain name. If your
-# internal DNS uses no MX records, specify the name of the intranet
-# gateway host instead.
-#
-# In the case of SMTP, specify a domain, host, host:port, [host]:port,
-# [address] or [address]:port; the form [host] turns off MX lookups.
-#
-# If you're connected via UUCP, see also the default_transport parameter.
-#
-#relayhost = $mydomain
-#relayhost = [gateway.my.domain]
-#relayhost = [mailserver.isp.tld]
-#relayhost = uucphost
-#relayhost = [an.ip.add.ress]
-
-# REJECTING UNKNOWN RELAY USERS
-#
-# The relay_recipient_maps parameter specifies optional lookup tables
-# with all addresses in the domains that match $relay_domains.
-#
-# If this parameter is defined, then the SMTP server will reject
-# mail for unknown relay users. This feature is off by default.
-#
-# The right-hand side of the lookup tables is conveniently ignored.
-# In the left-hand side, specify an @domain.tld wild-card, or specify
-# a user@domain.tld address.
-#
-#relay_recipient_maps = hash:/etc/postfix/relay_recipients
-
-# INPUT RATE CONTROL
-#
-# The in_flow_delay configuration parameter implements mail input
-# flow control. This feature is turned on by default, although it
-# still needs further development (it's disabled on SCO UNIX due
-# to an SCO bug).
-#
-# A Postfix process will pause for $in_flow_delay seconds before
-# accepting a new message, when the message arrival rate exceeds the
-# message delivery rate. With the default 100 SMTP server process
-# limit, this limits the mail inflow to 100 messages a second more
-# than the number of messages delivered per second.
-#
-# Specify 0 to disable the feature. Valid delays are 0..10.
-#
-#in_flow_delay = 1s
-
-# ADDRESS REWRITING
-#
-# The ADDRESS_REWRITING_README document gives information about
-# address masquerading or other forms of address rewriting including
-# username->Firstname.Lastname mapping.
-
-# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
-#
-# The VIRTUAL_README document gives information about the many forms
-# of domain hosting that Postfix supports.
-
-# "USER HAS MOVED" BOUNCE MESSAGES
-#
-# See the discussion in the ADDRESS_REWRITING_README document.
-
-# TRANSPORT MAP
-#
-# See the discussion in the ADDRESS_REWRITING_README document.
-
-# ALIAS DATABASE
-#
-# The alias_maps parameter specifies the list of alias databases used
-# by the local delivery agent. The default list is system dependent.
-#
-# On systems with NIS, the default is to search the local alias
-# database, then the NIS alias database. See aliases(5) for syntax
-# details.
-#
-# If you change the alias database, run "postalias /etc/aliases" (or
-# wherever your system stores the mail alias file), or simply run
-# "newaliases" to build the necessary DBM or DB file.
-#
-# It will take a minute or so before changes become visible. Use
-# "postfix reload" to eliminate the delay.
-#
-#alias_maps = dbm:/etc/aliases
-#alias_maps = hash:/etc/aliases
-#alias_maps = hash:/etc/aliases, nis:mail.aliases
-#alias_maps = netinfo:/aliases
-
-# The alias_database parameter specifies the alias database(s) that
-# are built with "newaliases" or "sendmail -bi". This is a separate
-# configuration parameter, because alias_maps (see above) may specify
-# tables that are not necessarily all under control by Postfix.
-#
-#alias_database = dbm:/etc/aliases
-#alias_database = dbm:/etc/mail/aliases
-#alias_database = hash:/etc/aliases
-#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
-
-# ADDRESS EXTENSIONS (e.g., user+foo)
-#
-# The recipient_delimiter parameter specifies the separator between
-# user names and address extensions (user+foo). See canonical(5),
-# local(8), relocated(5) and virtual(5) for the effects this has on
-# aliases, canonical, virtual, relocated and .forward file lookups.
-# Basically, the software tries user+foo and .forward+foo before
-# trying user and .forward.
-#
-#recipient_delimiter = +
-
-# DELIVERY TO MAILBOX
-#
-# The home_mailbox parameter specifies the optional pathname of a
-# mailbox file relative to a user's home directory. The default
-# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
-# "Maildir/" for qmail-style delivery (the / is required).
-#
-#home_mailbox = Mailbox
-#home_mailbox = Maildir/
-
-# The mail_spool_directory parameter specifies the directory where
-# UNIX-style mailboxes are kept. The default setting depends on the
-# system type.
-#
-#mail_spool_directory = /var/mail
-#mail_spool_directory = /var/spool/mail
-
-# The mailbox_command parameter specifies the optional external
-# command to use instead of mailbox delivery. The command is run as
-# the recipient with proper HOME, SHELL and LOGNAME environment settings.
-# Exception: delivery for root is done as $default_user.
-#
-# Other environment variables of interest: USER (recipient username),
-# EXTENSION (address extension), DOMAIN (domain part of address),
-# and LOCAL (the address localpart).
-#
-# Unlike other Postfix configuration parameters, the mailbox_command
-# parameter is not subjected to $parameter substitutions. This is to
-# make it easier to specify shell syntax (see example below).
-#
-# Avoid shell meta characters because they will force Postfix to run
-# an expensive shell process. Procmail alone is expensive enough.
-#
-# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
-# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
-#
-#mailbox_command = /some/where/procmail
-#mailbox_command = /some/where/procmail -a "$EXTENSION"
-
-# The mailbox_transport specifies the optional transport in master.cf
-# to use after processing aliases and .forward files. This parameter
-# has precedence over the mailbox_command, fallback_transport and
-# luser_relay parameters.
-#
-# Specify a string of the form transport:nexthop, where transport is
-# the name of a mail delivery transport defined in master.cf. The
-# :nexthop part is optional. For more details see the sample transport
-# configuration file.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must update the "local_recipient_maps" setting in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#mailbox_transport = lmtp:unix:/file/name
-#mailbox_transport = cyrus
-
-# The fallback_transport specifies the optional transport in master.cf
-# to use for recipients that are not found in the UNIX passwd database.
-# This parameter has precedence over the luser_relay parameter.
-#
-# Specify a string of the form transport:nexthop, where transport is
-# the name of a mail delivery transport defined in master.cf. The
-# :nexthop part is optional. For more details see the sample transport
-# configuration file.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must update the "local_recipient_maps" setting in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#fallback_transport = lmtp:unix:/file/name
-#fallback_transport = cyrus
-#fallback_transport =
-
-# The luser_relay parameter specifies an optional destination address
-# for unknown recipients. By default, mail for unknown@$mydestination,
-# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
-# as undeliverable.
-#
-# The following expansions are done on luser_relay: $user (recipient
-# username), $shell (recipient shell), $home (recipient home directory),
-# $recipient (full recipient address), $extension (recipient address
-# extension), $domain (recipient domain), $local (entire recipient
-# localpart), $recipient_delimiter. Specify ${name?value} or
-# ${name:value} to expand value only when $name does (does not) exist.
-#
-# luser_relay works only for the default Postfix local delivery agent.
-#
-# NOTE: if you use this feature for accounts not in the UNIX password
-# file, then you must specify "local_recipient_maps =" (i.e. empty) in
-# the main.cf file, otherwise the SMTP server will reject mail for
-# non-UNIX accounts with "User unknown in local recipient table".
-#
-#luser_relay = $user@other.host
-#luser_relay = $local@other.host
-#luser_relay = admin+$local
-
-# JUNK MAIL CONTROLS
-#
-# The controls listed here are only a very small subset. The file
-# SMTPD_ACCESS_README provides an overview.
-
-# The header_checks parameter specifies an optional table with patterns
-# that each logical message header is matched against, including
-# headers that span multiple physical lines.
-#
-# By default, these patterns also apply to MIME headers and to the
-# headers of attached messages. With older Postfix versions, MIME and
-# attached message headers were treated as body text.
-#
-# For details, see "man header_checks".
-#
-#header_checks = regexp:/etc/postfix/header_checks
-
-# FAST ETRN SERVICE
-#
-# Postfix maintains per-destination logfiles with information about
-# deferred mail, so that mail can be flushed quickly with the SMTP
-# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
-# See the ETRN_README document for a detailed description.
-#
-# The fast_flush_domains parameter controls what destinations are
-# eligible for this service. By default, they are all domains that
-# this server is willing to relay mail to.
-#
-#fast_flush_domains = $relay_domains
-
-# SHOW SOFTWARE VERSION OR NOT
-#
-# The smtpd_banner parameter specifies the text that follows the 220
-# code in the SMTP server's greeting banner. Some people like to see
-# the mail version advertised. By default, Postfix shows no version.
-#
-# You MUST specify $myhostname at the start of the text. That is an
-# RFC requirement. Postfix itself does not care.
-#
-#smtpd_banner = $myhostname ESMTP $mail_name
-#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
-
-# PARALLEL DELIVERY TO THE SAME DESTINATION
-#
-# How many parallel deliveries to the same user or domain? With local
-# delivery, it does not make sense to do massively parallel delivery
-# to the same user, because mailbox updates must happen sequentially,
-# and expensive pipelines in .forward files can cause disasters when
-# too many are run at the same time. With SMTP deliveries, 10
-# simultaneous connections to the same domain could be sufficient to
-# raise eyebrows.
-#
-# Each message delivery transport has its XXX_destination_concurrency_limit
-# parameter. The default is $default_destination_concurrency_limit for
-# most delivery transports. For the local delivery agent the default is 2.
-
-#local_destination_concurrency_limit = 2
-#default_destination_concurrency_limit = 20
-
-# DEBUGGING CONTROL
-#
-# The debug_peer_level parameter specifies the increment in verbose
-# logging level when an SMTP client or server host name or address
-# matches a pattern in the debug_peer_list parameter.
-#
debug_peer_level = 2
-
-# The debug_peer_list parameter specifies an optional list of domain
-# or network patterns, /file/name patterns or type:name tables. When
-# an SMTP client or server host name or address matches a pattern,
-# increase the verbose logging level by the amount specified in the
-# debug_peer_level parameter.
-#
-#debug_peer_list = 127.0.0.1
-#debug_peer_list = some.domain
-
-# The debugger_command specifies the external command that is executed
-# when a Postfix daemon program is run with the -D option.
-#
-# Use "command .. & sleep 5" so that the debugger can attach before
-# the process marches on. If you use an X-based debugger, be sure to
-# set up your XAUTHORITY environment variable before starting Postfix.
-#
+debug_peer_list =
debugger_command =
- PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
- ddd $daemon_directory/$process_name $process_id & sleep 5
-
-# If you can't use X, use this to capture the call stack when a
-# daemon crashes. The result is in a file in the configuration
-# directory, and is named after the process name and the process ID.
-#
-# debugger_command =
-# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
-# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
-# >$config_directory/$process_name.$process_id.log & sleep 5
-#
-# Another possibility is to run gdb under a detached screen session.
-# To attach to the screen sesssion, su root and run "screen -r
-# <id_string>" where <id_string> uniquely matches one of the detached
-# sessions (from "screen -list").
-#
-# debugger_command =
-# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
-# -dmS $process_name gdb $daemon_directory/$process_name
-# $process_id & sleep 1
-
-# INSTALL-TIME CONFIGURATION INFORMATION
-#
-# The following parameters are used when installing a new Postfix version.
-#
-# sendmail_path: The full pathname of the Postfix sendmail command.
-# This is the Sendmail-compatible mail posting interface.
-#
-sendmail_path = /usr/sbin/sendmail
-
-# newaliases_path: The full pathname of the Postfix newaliases command.
-# This is the Sendmail-compatible command to build alias databases.
-#
-newaliases_path = /usr/bin/newaliases
-
-# mailq_path: The full pathname of the Postfix mailq command. This
-# is the Sendmail-compatible mail queue listing command.
-#
+default_database_type = hash
+default_delivery_slot_cost = 5
+default_delivery_slot_discount = 50
+default_delivery_slot_loan = 3
+default_delivery_status_filter =
+default_destination_concurrency_failed_cohort_limit = 1
+default_destination_concurrency_limit = 20
+default_destination_concurrency_negative_feedback = 1
+default_destination_concurrency_positive_feedback = 1
+default_destination_rate_delay = 0s
+default_destination_recipient_limit = 50
+default_extra_recipient_limit = 1000
+default_filter_nexthop =
+default_minimum_delivery_slots = 3
+default_privs = nobody
+default_process_limit = 100
+default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
+default_recipient_limit = 20000
+default_recipient_refill_delay = 5s
+default_recipient_refill_limit = 100
+default_transport = smtp
+default_verp_delimiters = +=
+defer_code = 450
+defer_service_name = defer
+defer_transports =
+delay_logging_resolution_limit = 2
+delay_notice_recipient = postmaster
+delay_warning_time = 0h
+deliver_lock_attempts = 20
+deliver_lock_delay = 1s
+destination_concurrency_feedback_debug = no
+detect_8bit_encoding_header = yes
+disable_dns_lookups = no
+disable_mime_input_processing = no
+disable_mime_output_conversion = no
+disable_verp_bounces = no
+disable_vrfy_command = no
+dnsblog_reply_delay = 0s
+dnsblog_service_name = dnsblog
+dont_remove = 0
+double_bounce_sender = double-bounce
+duplicate_filter_limit = 1000
+empty_address_default_transport_maps_lookup_key = <>
+empty_address_recipient = MAILER-DAEMON
+empty_address_relayhost_maps_lookup_key = <>
+enable_long_queue_ids = no
+enable_original_recipient = yes
+error_delivery_slot_cost = $default_delivery_slot_cost
+error_delivery_slot_discount = $default_delivery_slot_discount
+error_delivery_slot_loan = $default_delivery_slot_loan
+error_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+error_destination_concurrency_limit = $default_destination_concurrency_limit
+error_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+error_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+error_destination_rate_delay = $default_destination_rate_delay
+error_destination_recipient_limit = $default_destination_recipient_limit
+error_extra_recipient_limit = $default_extra_recipient_limit
+error_initial_destination_concurrency = $initial_destination_concurrency
+error_minimum_delivery_slots = $default_minimum_delivery_slots
+error_notice_recipient = postmaster
+error_recipient_limit = $default_recipient_limit
+error_recipient_refill_delay = $default_recipient_refill_delay
+error_recipient_refill_limit = $default_recipient_refill_limit
+error_service_name = error
+execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
+expand_owner_alias = no
+export_environment = TZ MAIL_CONFIG LANG
+fallback_transport =
+fallback_transport_maps =
+fast_flush_domains = $relay_domains
+fast_flush_purge_time = 7d
+fast_flush_refresh_time = 12h
+fault_injection_code = 0
+flush_service_name = flush
+fork_attempts = 5
+fork_delay = 1s
+forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
+forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
+frozen_delivered_to = yes
+hash_queue_depth = 1
+hash_queue_names = deferred, defer
+header_address_token_limit = 10240
+header_checks =
+header_size_limit = 102400
+helpful_warnings = yes
+home_mailbox =
+hopcount_limit = 50
+html_directory = no
+ignore_mx_lookup_error = no
+import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
+in_flow_delay = 1s
+inet_interfaces = all
+inet_protocols = all
+initial_destination_concurrency = 5
+internal_mail_filter_classes =
+invalid_hostname_reject_code = 501
+ipc_idle = 5s
+ipc_timeout = 3600s
+ipc_ttl = 1000s
+line_length_limit = 2048
+lmdb_map_size = 16777216
+lmtp_address_preference = any
+lmtp_address_verify_target = rcpt
+lmtp_assume_final = no
+lmtp_bind_address =
+lmtp_bind_address6 =
+lmtp_body_checks =
+lmtp_cname_overrides_servername = no
+lmtp_connect_timeout = 0s
+lmtp_connection_cache_destinations =
+lmtp_connection_cache_on_demand = yes
+lmtp_connection_cache_time_limit = 2s
+lmtp_connection_reuse_count_limit = 0
+lmtp_connection_reuse_time_limit = 300s
+lmtp_data_done_timeout = 600s
+lmtp_data_init_timeout = 120s
+lmtp_data_xfer_timeout = 180s
+lmtp_defer_if_no_mx_address_found = no
+lmtp_delivery_slot_cost = $default_delivery_slot_cost
+lmtp_delivery_slot_discount = $default_delivery_slot_discount
+lmtp_delivery_slot_loan = $default_delivery_slot_loan
+lmtp_delivery_status_filter = $default_delivery_status_filter
+lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
+lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+lmtp_destination_rate_delay = $default_destination_rate_delay
+lmtp_destination_recipient_limit = $default_destination_recipient_limit
+lmtp_discard_lhlo_keyword_address_maps =
+lmtp_discard_lhlo_keywords =
+lmtp_dns_reply_filter =
+lmtp_dns_resolver_options =
+lmtp_dns_support_level =
+lmtp_enforce_tls = no
+lmtp_extra_recipient_limit = $default_extra_recipient_limit
+lmtp_generic_maps =
+lmtp_header_checks =
+lmtp_host_lookup = dns
+lmtp_initial_destination_concurrency = $initial_destination_concurrency
+lmtp_lhlo_name = $myhostname
+lmtp_lhlo_timeout = 300s
+lmtp_line_length_limit = 998
+lmtp_mail_timeout = 300s
+lmtp_mime_header_checks =
+lmtp_minimum_delivery_slots = $default_minimum_delivery_slots
+lmtp_mx_address_limit = 5
+lmtp_mx_session_limit = 2
+lmtp_nested_header_checks =
+lmtp_per_record_deadline = no
+lmtp_pix_workaround_delay_time = 10s
+lmtp_pix_workaround_maps =
+lmtp_pix_workaround_threshold_time = 500s
+lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
+lmtp_quit_timeout = 300s
+lmtp_quote_rfc821_envelope = yes
+lmtp_randomize_addresses = yes
+lmtp_rcpt_timeout = 300s
+lmtp_recipient_limit = $default_recipient_limit
+lmtp_recipient_refill_delay = $default_recipient_refill_delay
+lmtp_recipient_refill_limit = $default_recipient_refill_limit
+lmtp_reply_filter =
+lmtp_rset_timeout = 20s
+lmtp_sasl_auth_cache_name =
+lmtp_sasl_auth_cache_time = 90d
+lmtp_sasl_auth_enable = no
+lmtp_sasl_auth_soft_bounce = yes
+lmtp_sasl_mechanism_filter =
+lmtp_sasl_password_maps =
+lmtp_sasl_path =
+lmtp_sasl_security_options = noplaintext, noanonymous
+lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
+lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
+lmtp_sasl_type = cyrus
+lmtp_send_dummy_mail_auth = no
+lmtp_send_xforward_command = no
+lmtp_sender_dependent_authentication = no
+lmtp_skip_5xx_greeting = yes
+lmtp_skip_quit_response = no
+lmtp_starttls_timeout = 300s
+lmtp_tcp_port = 24
+lmtp_tls_CAfile =
+lmtp_tls_CApath =
+lmtp_tls_block_early_mail_reply = no
+lmtp_tls_cert_file =
+lmtp_tls_ciphers = medium
+lmtp_tls_dcert_file =
+lmtp_tls_dkey_file = $lmtp_tls_dcert_file
+lmtp_tls_eccert_file =
+lmtp_tls_eckey_file = $lmtp_tls_eccert_file
+lmtp_tls_enforce_peername = yes
+lmtp_tls_exclude_ciphers =
+lmtp_tls_fingerprint_cert_match =
+lmtp_tls_fingerprint_digest = md5
+lmtp_tls_force_insecure_host_tlsa_lookup = no
+lmtp_tls_key_file = $lmtp_tls_cert_file
+lmtp_tls_loglevel = 0
+lmtp_tls_mandatory_ciphers = medium
+lmtp_tls_mandatory_exclude_ciphers =
+lmtp_tls_mandatory_protocols = !SSLv2, !SSLv3
+lmtp_tls_note_starttls_offer = no
+lmtp_tls_per_site =
+lmtp_tls_policy_maps =
+lmtp_tls_protocols = !SSLv2, !SSLv3
+lmtp_tls_scert_verifydepth = 9
+lmtp_tls_secure_cert_match = nexthop
+lmtp_tls_security_level =
+lmtp_tls_session_cache_database =
+lmtp_tls_session_cache_timeout = 3600s
+lmtp_tls_trust_anchor_file =
+lmtp_tls_verify_cert_match = hostname
+lmtp_tls_wrappermode = no
+lmtp_use_tls = no
+lmtp_xforward_timeout = 300s
+local_command_shell =
+local_delivery_slot_cost = $default_delivery_slot_cost
+local_delivery_slot_discount = $default_delivery_slot_discount
+local_delivery_slot_loan = $default_delivery_slot_loan
+local_delivery_status_filter = $default_delivery_status_filter
+local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+local_destination_concurrency_limit = 2
+local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+local_destination_rate_delay = $default_destination_rate_delay
+local_destination_recipient_limit = 1
+local_extra_recipient_limit = $default_extra_recipient_limit
+local_header_rewrite_clients = permit_inet_interfaces
+local_initial_destination_concurrency = $initial_destination_concurrency
+local_minimum_delivery_slots = $default_minimum_delivery_slots
+local_recipient_limit = $default_recipient_limit
+local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+local_recipient_refill_delay = $default_recipient_refill_delay
+local_recipient_refill_limit = $default_recipient_refill_limit
+local_transport = local:$myhostname
+luser_relay =
+mail_name = Postfix
+mail_owner = postfix
+mail_release_date = 20151010
+mail_spool_directory = /var/mail
+mail_version = 3.0.3
+mailbox_command =
+mailbox_command_maps =
+mailbox_delivery_lock = fcntl, dotlock
+mailbox_size_limit = 51200000
+mailbox_transport =
+mailbox_transport_maps =
mailq_path = /usr/bin/mailq
-
-# setgid_group: The group for mail submission and queue management
-# commands. This must be a group name with a numerical group ID that
-# is not shared with other accounts, not even with the Postfix account.
-#
-setgid_group = postdrop
-
-# html_directory: The location of the Postfix HTML documentation.
-#
-html_directory = /usr/share/doc/postfix-2.8.7/html
-
-# manpage_directory: The location of the Postfix on-line manual pages.
-#
-manpage_directory = /usr/share/man
-
-# sample_directory: The location of the Postfix sample configuration files.
-# This parameter is obsolete as of Postfix 2.1.
-#
+manpage_directory = /usr/local/man
+maps_rbl_domains =
+maps_rbl_reject_code = 554
+masquerade_classes = envelope_sender, header_sender, header_recipient
+masquerade_domains =
+masquerade_exceptions =
+master_service_disable =
+max_idle = 100s
+max_use = 100
+maximal_backoff_time = 4000s
+maximal_queue_lifetime = 5d
+message_drop_headers = bcc, content-length, resent-bcc, return-path
+message_reject_characters =
+message_size_limit = 10240000
+message_strip_characters =
+meta_directory = /etc/postfix
+milter_command_timeout = 30s
+milter_connect_macros = j {daemon_name} v
+milter_connect_timeout = 30s
+milter_content_timeout = 300s
+milter_data_macros = i
+milter_default_action = tempfail
+milter_end_of_data_macros = i
+milter_end_of_header_macros = i
+milter_header_checks =
+milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
+milter_macro_daemon_name = $myhostname
+milter_macro_v = $mail_name $mail_version
+milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr} {mail_host} {mail_mailer}
+milter_protocol = 6
+milter_rcpt_macros = i {rcpt_addr} {rcpt_host} {rcpt_mailer}
+milter_unknown_command_macros =
+mime_boundary_length_limit = 2048
+mime_header_checks = $header_checks
+mime_nesting_limit = 100
+minimal_backoff_time = 300s
+multi_instance_directories =
+multi_instance_enable = no
+multi_instance_group =
+multi_instance_name =
+multi_instance_wrapper =
+multi_recipient_bounce_reject_code = 550
+mydestination = $myhostname, localhost.$mydomain, localhost
+mynetworks_style = ${{$compatibility_level} < {2} ? {subnet} : {host}}
+myorigin = $myhostname
+nested_header_checks = $header_checks
+newaliases_path = /usr/bin/newaliases
+non_fqdn_reject_code = 504
+non_smtpd_milters =
+notify_classes = resource, software
+owner_request_special = yes
+parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_authorized_clients,relay_domains,smtpd_access_maps
+permit_mx_backup_networks =
+pickup_service_name = pickup
+pipe_delivery_status_filter = $default_delivery_status_filter
+plaintext_reject_code = 450
+postmulti_control_commands = reload flush
+postmulti_start_commands = start
+postmulti_stop_commands = stop abort drain quick-stop
+postscreen_access_list = permit_mynetworks
+postscreen_bare_newline_action = ignore
+postscreen_bare_newline_enable = no
+postscreen_bare_newline_ttl = 30d
+postscreen_blacklist_action = ignore
+postscreen_cache_cleanup_interval = 12h
+postscreen_cache_map = btree:$data_directory/postscreen_cache
+postscreen_cache_retention_time = 7d
+postscreen_client_connection_count_limit = $smtpd_client_connection_count_limit
+postscreen_command_count_limit = 20
+postscreen_command_filter =
+postscreen_command_time_limit = ${stress?{10}:{300}}s
+postscreen_disable_vrfy_command = $disable_vrfy_command
+postscreen_discard_ehlo_keyword_address_maps = $smtpd_discard_ehlo_keyword_address_maps
+postscreen_discard_ehlo_keywords = $smtpd_discard_ehlo_keywords
+postscreen_dnsbl_action = ignore
+postscreen_dnsbl_reply_map =
+postscreen_dnsbl_sites =
+postscreen_dnsbl_threshold = 1
+postscreen_dnsbl_timeout = 10s
+postscreen_dnsbl_ttl = 1h
+postscreen_dnsbl_whitelist_threshold = 0
+postscreen_enforce_tls = $smtpd_enforce_tls
+postscreen_expansion_filter = $smtpd_expansion_filter
+postscreen_forbidden_commands = $smtpd_forbidden_commands
+postscreen_greet_action = ignore
+postscreen_greet_banner = $smtpd_banner
+postscreen_greet_ttl = 1d
+postscreen_greet_wait = ${stress?{2}:{6}}s
+postscreen_helo_required = $smtpd_helo_required
+postscreen_non_smtp_command_action = drop
+postscreen_non_smtp_command_enable = no
+postscreen_non_smtp_command_ttl = 30d
+postscreen_pipelining_action = enforce
+postscreen_pipelining_enable = no
+postscreen_pipelining_ttl = 30d
+postscreen_post_queue_limit = $default_process_limit
+postscreen_pre_queue_limit = $default_process_limit
+postscreen_reject_footer = $smtpd_reject_footer
+postscreen_tls_security_level = $smtpd_tls_security_level
+postscreen_upstream_proxy_protocol =
+postscreen_upstream_proxy_timeout = 5s
+postscreen_use_tls = $smtpd_use_tls
+postscreen_watchdog_timeout = 10s
+postscreen_whitelist_interfaces = static:all
+prepend_delivered_header = command, file, forward
+process_id_directory = pid
+propagate_unmatched_extensions = canonical, virtual
+proxy_interfaces =
+proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $smtpd_sender_login_maps $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps $alias_maps $smtpd_client_restrictions $smtpd_helo_restrictions $smtpd_sender_restrictions $smtpd_relay_restrictions $smtpd_recipient_restrictions
+proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name $address_verify_map $postscreen_cache_map
+proxymap_service_name = proxymap
+proxywrite_service_name = proxywrite
+qmgr_clog_warn_time = 300s
+qmgr_daemon_timeout = 1000s
+qmgr_fudge_factor = 100
+qmgr_ipc_timeout = 60s
+qmgr_message_active_limit = 20000
+qmgr_message_recipient_limit = 20000
+qmgr_message_recipient_minimum = 10
+qmqpd_authorized_clients =
+qmqpd_client_port_logging = no
+qmqpd_error_delay = 1s
+qmqpd_timeout = 300s
+queue_directory = /var/spool/postfix
+queue_file_attribute_count_limit = 100
+queue_minfree = 0
+queue_run_delay = 300s
+queue_service_name = qmgr
+rbl_reply_maps =
+readme_directory = no
+receive_override_options =
+recipient_bcc_maps =
+recipient_canonical_classes = envelope_recipient, header_recipient
+recipient_canonical_maps =
+recipient_delimiter =
+reject_code = 554
+reject_tempfail_action = defer_if_permit
+relay_clientcerts =
+relay_delivery_slot_cost = $default_delivery_slot_cost
+relay_delivery_slot_discount = $default_delivery_slot_discount
+relay_delivery_slot_loan = $default_delivery_slot_loan
+relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+relay_destination_concurrency_limit = $default_destination_concurrency_limit
+relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+relay_destination_rate_delay = $default_destination_rate_delay
+relay_destination_recipient_limit = $default_destination_recipient_limit
+relay_domains = ${{$compatibility_level} < {2} ? {$mydestination} : {}}
+relay_domains_reject_code = 554
+relay_extra_recipient_limit = $default_extra_recipient_limit
+relay_initial_destination_concurrency = $initial_destination_concurrency
+relay_minimum_delivery_slots = $default_minimum_delivery_slots
+relay_recipient_limit = $default_recipient_limit
+relay_recipient_maps =
+relay_recipient_refill_delay = $default_recipient_refill_delay
+relay_recipient_refill_limit = $default_recipient_refill_limit
+relay_transport = relay
+relayhost =
+relocated_maps =
+remote_header_rewrite_domain =
+require_home_directory = no
+reset_owner_alias = no
+resolve_dequoted_address = yes
+resolve_null_domain = no
+resolve_numeric_domain = no
+retry_delivery_slot_cost = $default_delivery_slot_cost
+retry_delivery_slot_discount = $default_delivery_slot_discount
+retry_delivery_slot_loan = $default_delivery_slot_loan
+retry_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+retry_destination_concurrency_limit = $default_destination_concurrency_limit
+retry_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+retry_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+retry_destination_rate_delay = $default_destination_rate_delay
+retry_destination_recipient_limit = $default_destination_recipient_limit
+retry_extra_recipient_limit = $default_extra_recipient_limit
+retry_initial_destination_concurrency = $initial_destination_concurrency
+retry_minimum_delivery_slots = $default_minimum_delivery_slots
+retry_recipient_limit = $default_recipient_limit
+retry_recipient_refill_delay = $default_recipient_refill_delay
+retry_recipient_refill_limit = $default_recipient_refill_limit
+rewrite_service_name = rewrite
sample_directory = /etc/postfix
-
-# readme_directory: The location of the Postfix README files.
-#
-readme_directory = /usr/share/doc/postfix-2.8.7/readme
-home_mailbox = .maildir/
+send_cyrus_sasl_authzid = no
+sender_bcc_maps =
+sender_canonical_classes = envelope_sender, header_sender
+sender_canonical_maps =
+sender_dependent_default_transport_maps =
+sender_dependent_relayhost_maps =
+sendmail_fix_line_endings = always
+sendmail_path = /usr/sbin/sendmail
+service_throttle_time = 60s
+setgid_group = postdrop
+shlib_directory = /usr/lib64/postfix/${mail_version}
+show_user_unknown_table_name = yes
+showq_service_name = showq
+smtp_address_preference = any
+smtp_address_verify_target = rcpt
+smtp_always_send_ehlo = yes
+smtp_bind_address =
+smtp_bind_address6 =
+smtp_body_checks =
+smtp_cname_overrides_servername = no
+smtp_connect_timeout = 30s
+smtp_connection_cache_destinations =
+smtp_connection_cache_on_demand = yes
+smtp_connection_cache_time_limit = 2s
+smtp_connection_reuse_count_limit = 0
+smtp_connection_reuse_time_limit = 300s
+smtp_data_done_timeout = 600s
+smtp_data_init_timeout = 120s
+smtp_data_xfer_timeout = 180s
+smtp_defer_if_no_mx_address_found = no
+smtp_delivery_slot_cost = $default_delivery_slot_cost
+smtp_delivery_slot_discount = $default_delivery_slot_discount
+smtp_delivery_slot_loan = $default_delivery_slot_loan
+smtp_delivery_status_filter = $default_delivery_status_filter
+smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+smtp_destination_concurrency_limit = $default_destination_concurrency_limit
+smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+smtp_destination_rate_delay = $default_destination_rate_delay
+smtp_destination_recipient_limit = $default_destination_recipient_limit
+smtp_discard_ehlo_keyword_address_maps =
+smtp_discard_ehlo_keywords =
+smtp_dns_reply_filter =
+smtp_dns_resolver_options =
+smtp_dns_support_level =
+smtp_enforce_tls = no
+smtp_extra_recipient_limit = $default_extra_recipient_limit
+smtp_fallback_relay = $fallback_relay
+smtp_generic_maps =
+smtp_header_checks =
+smtp_helo_name = $myhostname
+smtp_helo_timeout = 300s
+smtp_host_lookup = dns
+smtp_initial_destination_concurrency = $initial_destination_concurrency
+smtp_line_length_limit = 998
+smtp_mail_timeout = 300s
+smtp_mime_header_checks =
+smtp_minimum_delivery_slots = $default_minimum_delivery_slots
+smtp_mx_address_limit = 5
+smtp_mx_session_limit = 2
+smtp_nested_header_checks =
+smtp_never_send_ehlo = no
+smtp_per_record_deadline = no
+smtp_pix_workaround_delay_time = 10s
+smtp_pix_workaround_maps =
+smtp_pix_workaround_threshold_time = 500s
+smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
+smtp_quit_timeout = 300s
+smtp_quote_rfc821_envelope = yes
+smtp_randomize_addresses = yes
+smtp_rcpt_timeout = 300s
+smtp_recipient_limit = $default_recipient_limit
+smtp_recipient_refill_delay = $default_recipient_refill_delay
+smtp_recipient_refill_limit = $default_recipient_refill_limit
+smtp_reply_filter =
+smtp_rset_timeout = 20s
+smtp_sasl_auth_cache_name =
+smtp_sasl_auth_cache_time = 90d
+smtp_sasl_auth_enable = no
+smtp_sasl_auth_soft_bounce = yes
+smtp_sasl_mechanism_filter =
+smtp_sasl_password_maps =
+smtp_sasl_path =
+smtp_sasl_security_options = noplaintext, noanonymous
+smtp_sasl_tls_security_options = $smtp_sasl_security_options
+smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
+smtp_sasl_type = cyrus
+smtp_send_dummy_mail_auth = no
+smtp_send_xforward_command = no
+smtp_sender_dependent_authentication = no
+smtp_skip_5xx_greeting = yes
+smtp_skip_quit_response = yes
+smtp_starttls_timeout = 300s
+smtp_tls_CAfile =
+smtp_tls_CApath =
+smtp_tls_block_early_mail_reply = no
+smtp_tls_cert_file =
+smtp_tls_ciphers = medium
+smtp_tls_dcert_file =
+smtp_tls_dkey_file = $smtp_tls_dcert_file
+smtp_tls_eccert_file =
+smtp_tls_eckey_file = $smtp_tls_eccert_file
+smtp_tls_enforce_peername = yes
+smtp_tls_exclude_ciphers =
+smtp_tls_fingerprint_cert_match =
+smtp_tls_fingerprint_digest = md5
+smtp_tls_force_insecure_host_tlsa_lookup = no
+smtp_tls_key_file = $smtp_tls_cert_file
+smtp_tls_loglevel = 0
+smtp_tls_mandatory_ciphers = medium
+smtp_tls_mandatory_exclude_ciphers =
+smtp_tls_mandatory_protocols = !SSLv2, !SSLv3
+smtp_tls_note_starttls_offer = no
+smtp_tls_per_site =
+smtp_tls_policy_maps =
+smtp_tls_protocols = !SSLv2, !SSLv3
+smtp_tls_scert_verifydepth = 9
+smtp_tls_secure_cert_match = nexthop, dot-nexthop
+smtp_tls_security_level =
+smtp_tls_session_cache_database =
+smtp_tls_session_cache_timeout = 3600s
+smtp_tls_trust_anchor_file =
+smtp_tls_verify_cert_match = hostname
+smtp_tls_wrappermode = no
+smtp_use_tls = no
+smtp_xforward_timeout = 300s
+smtpd_authorized_verp_clients = $authorized_verp_clients
+smtpd_authorized_xclient_hosts =
+smtpd_authorized_xforward_hosts =
+smtpd_banner = $myhostname ESMTP $mail_name
+smtpd_client_connection_count_limit = 50
+smtpd_client_connection_rate_limit = 0
+smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
+smtpd_client_message_rate_limit = 0
+smtpd_client_new_tls_session_rate_limit = 0
+smtpd_client_port_logging = no
+smtpd_client_recipient_rate_limit = 0
+smtpd_client_restrictions =
+smtpd_command_filter =
+smtpd_data_restrictions =
+smtpd_delay_open_until_valid_rcpt = yes
+smtpd_delay_reject = yes
+smtpd_discard_ehlo_keyword_address_maps =
+smtpd_discard_ehlo_keywords =
+smtpd_dns_reply_filter =
+smtpd_end_of_data_restrictions =
+smtpd_enforce_tls = no
+smtpd_error_sleep_time = 1s
+smtpd_etrn_restrictions =
+smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~
+smtpd_forbidden_commands = CONNECT GET POST
+smtpd_hard_error_limit = ${stress?{1}:{20}}
+smtpd_helo_required = no
+smtpd_helo_restrictions =
+smtpd_history_flush_threshold = 100
+smtpd_junk_command_limit = ${stress?{1}:{100}}
+smtpd_log_access_permit_actions =
+smtpd_milters =
+smtpd_noop_commands =
+smtpd_null_access_lookup_key = <>
+smtpd_peername_lookup = yes
+smtpd_per_record_deadline = ${stress?{yes}:{no}}
+smtpd_policy_service_default_action = 451 4.3.5 Server configuration problem
+smtpd_policy_service_max_idle = 300s
+smtpd_policy_service_max_ttl = 1000s
+smtpd_policy_service_request_limit = 0
+smtpd_policy_service_retry_delay = 1s
+smtpd_policy_service_timeout = 100s
+smtpd_policy_service_try_limit = 2
+smtpd_proxy_ehlo = $myhostname
+smtpd_proxy_filter =
+smtpd_proxy_options =
+smtpd_proxy_timeout = 100s
+smtpd_recipient_limit = 1000
+smtpd_recipient_overshoot_limit = 1000
+smtpd_recipient_restrictions =
+smtpd_reject_footer =
+smtpd_reject_unlisted_recipient = yes
+smtpd_reject_unlisted_sender = no
+smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, defer_unauth_destination
+smtpd_restriction_classes =
+smtpd_sasl_auth_enable = no
+smtpd_sasl_authenticated_header = no
+smtpd_sasl_exceptions_networks =
+smtpd_sasl_local_domain =
+smtpd_sasl_path = smtpd
+smtpd_sasl_security_options = noanonymous
+smtpd_sasl_service = smtp
+smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
+smtpd_sasl_type = cyrus
+smtpd_sender_login_maps =
+smtpd_sender_restrictions =
+smtpd_service_name = smtpd
+smtpd_soft_error_limit = 10
+smtpd_starttls_timeout = ${stress?{10}:{300}}s
+smtpd_timeout = ${stress?{10}:{300}}s
+smtpd_tls_CAfile =
+smtpd_tls_CApath =
+smtpd_tls_always_issue_session_ids = yes
+smtpd_tls_ask_ccert = no
+smtpd_tls_auth_only = no
+smtpd_tls_ccert_verifydepth = 9
+smtpd_tls_cert_file =
+smtpd_tls_ciphers = medium
+smtpd_tls_dcert_file =
+smtpd_tls_dh1024_param_file =
+smtpd_tls_dh512_param_file =
+smtpd_tls_dkey_file = $smtpd_tls_dcert_file
+smtpd_tls_eccert_file =
+smtpd_tls_eckey_file = $smtpd_tls_eccert_file
+smtpd_tls_eecdh_grade = strong
+smtpd_tls_exclude_ciphers =
+smtpd_tls_fingerprint_digest = md5
+smtpd_tls_key_file = $smtpd_tls_cert_file
+smtpd_tls_loglevel = 0
+smtpd_tls_mandatory_ciphers = medium
+smtpd_tls_mandatory_exclude_ciphers =
+smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3
+smtpd_tls_protocols = !SSLv2, !SSLv3
+smtpd_tls_received_header = no
+smtpd_tls_req_ccert = no
+smtpd_tls_security_level =
+smtpd_tls_session_cache_database =
+smtpd_tls_session_cache_timeout = 3600s
+smtpd_tls_wrappermode = no
+smtpd_upstream_proxy_protocol =
+smtpd_upstream_proxy_timeout = 5s
+smtpd_use_tls = no
+smtputf8_autodetect_classes = sendmail, verify
+smtputf8_enable = ${{$compatibility_level} < {1} ? {no} : {yes}}
+soft_bounce = no
+stale_lock_time = 500s
+stress =
+strict_7bit_headers = no
+strict_8bitmime = no
+strict_8bitmime_body = no
+strict_mailbox_ownership = yes
+strict_mime_encoding_domain = no
+strict_rfc821_envelopes = no
+strict_smtputf8 = no
+sun_mailtool_compatibility = no
+swap_bangpath = yes
+syslog_facility = mail
+syslog_name = ${multi_instance_name?{$multi_instance_name}:{postfix}}
+tcp_windowsize = 0
+tls_append_default_CA = no
+tls_daemon_random_bytes = 32
+tls_dane_digest_agility = on
+tls_dane_digests = sha512 sha256
+tls_dane_trust_anchor_digest_enable = yes
+tls_disable_workarounds =
+tls_eecdh_strong_curve = prime256v1
+tls_eecdh_ultra_curve = secp384r1
+tls_export_cipherlist = aNULL:-aNULL:ALL:+RC4:@STRENGTH
+tls_high_cipherlist = aNULL:-aNULL:ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
+tls_legacy_public_key_fingerprints = no
+tls_low_cipherlist = aNULL:-aNULL:ALL:!EXPORT:+RC4:@STRENGTH
+tls_medium_cipherlist = aNULL:-aNULL:ALL:!EXPORT:!LOW:+RC4:@STRENGTH
+tls_null_cipherlist = eNULL:!aNULL
+tls_preempt_cipherlist = no
+tls_random_bytes = 32
+tls_random_exchange_name = ${data_directory}/prng_exch
+tls_random_prng_update_period = 3600s
+tls_random_reseed_period = 3600s
+tls_random_source = dev:/dev/urandom
+tls_session_ticket_cipher = aes-128-cbc
+tls_ssl_options =
+tls_wildcard_matches_multiple_labels = yes
+tlsmgr_service_name = tlsmgr
+tlsproxy_enforce_tls = $smtpd_enforce_tls
+tlsproxy_service_name = tlsproxy
+tlsproxy_tls_CAfile = $smtpd_tls_CAfile
+tlsproxy_tls_CApath = $smtpd_tls_CApath
+tlsproxy_tls_always_issue_session_ids = $smtpd_tls_always_issue_session_ids
+tlsproxy_tls_ask_ccert = $smtpd_tls_ask_ccert
+tlsproxy_tls_ccert_verifydepth = $smtpd_tls_ccert_verifydepth
+tlsproxy_tls_cert_file = $smtpd_tls_cert_file
+tlsproxy_tls_ciphers = $smtpd_tls_ciphers
+tlsproxy_tls_dcert_file = $smtpd_tls_dcert_file
+tlsproxy_tls_dh1024_param_file = $smtpd_tls_dh1024_param_file
+tlsproxy_tls_dh512_param_file = $smtpd_tls_dh512_param_file
+tlsproxy_tls_dkey_file = $smtpd_tls_dkey_file
+tlsproxy_tls_eccert_file = $smtpd_tls_eccert_file
+tlsproxy_tls_eckey_file = $smtpd_tls_eckey_file
+tlsproxy_tls_eecdh_grade = $smtpd_tls_eecdh_grade
+tlsproxy_tls_exclude_ciphers = $smtpd_tls_exclude_ciphers
+tlsproxy_tls_fingerprint_digest = $smtpd_tls_fingerprint_digest
+tlsproxy_tls_key_file = $smtpd_tls_key_file
+tlsproxy_tls_loglevel = $smtpd_tls_loglevel
+tlsproxy_tls_mandatory_ciphers = $smtpd_tls_mandatory_ciphers
+tlsproxy_tls_mandatory_exclude_ciphers = $smtpd_tls_mandatory_exclude_ciphers
+tlsproxy_tls_mandatory_protocols = $smtpd_tls_mandatory_protocols
+tlsproxy_tls_protocols = $smtpd_tls_protocols
+tlsproxy_tls_req_ccert = $smtpd_tls_req_ccert
+tlsproxy_tls_security_level = $smtpd_tls_security_level
+tlsproxy_use_tls = $smtpd_use_tls
+tlsproxy_watchdog_timeout = 10s
+trace_service_name = trace
+transport_maps =
+transport_retry_time = 60s
+trigger_timeout = 10s
+undisclosed_recipients_header =
+unknown_address_reject_code = 450
+unknown_address_tempfail_action = $reject_tempfail_action
+unknown_client_reject_code = 450
+unknown_helo_hostname_tempfail_action = $reject_tempfail_action
+unknown_hostname_reject_code = 450
+unknown_local_recipient_reject_code = 550
+unknown_relay_recipient_reject_code = 550
+unknown_virtual_alias_reject_code = 550
+unknown_virtual_mailbox_reject_code = 550
+unverified_recipient_defer_code = 450
+unverified_recipient_reject_code = 450
+unverified_recipient_reject_reason =
+unverified_recipient_tempfail_action = $reject_tempfail_action
+unverified_sender_defer_code = 450
+unverified_sender_reject_code = 450
+unverified_sender_reject_reason =
+unverified_sender_tempfail_action = $reject_tempfail_action
+verp_delimiter_filter = -=+
+virtual_alias_address_length_limit = 1000
+virtual_alias_domains = $virtual_alias_maps
+virtual_alias_expansion_limit = 1000
+virtual_alias_maps = $virtual_maps
+virtual_alias_recursion_limit = 1000
+virtual_delivery_slot_cost = $default_delivery_slot_cost
+virtual_delivery_slot_discount = $default_delivery_slot_discount
+virtual_delivery_slot_loan = $default_delivery_slot_loan
+virtual_delivery_status_filter = $default_delivery_status_filter
+virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
+virtual_destination_concurrency_limit = $default_destination_concurrency_limit
+virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
+virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
+virtual_destination_rate_delay = $default_destination_rate_delay
+virtual_destination_recipient_limit = $default_destination_recipient_limit
+virtual_extra_recipient_limit = $default_extra_recipient_limit
+virtual_gid_maps =
+virtual_initial_destination_concurrency = $initial_destination_concurrency
+virtual_mailbox_base =
+virtual_mailbox_domains = $virtual_mailbox_maps
+virtual_mailbox_limit = 51200000
+virtual_mailbox_lock = fcntl, dotlock
+virtual_mailbox_maps =
+virtual_minimum_delivery_slots = $default_minimum_delivery_slots
+virtual_minimum_uid = 100
+virtual_recipient_limit = $default_recipient_limit
+virtual_recipient_refill_delay = $default_recipient_refill_delay
+virtual_recipient_refill_limit = $default_recipient_refill_limit
+virtual_transport = virtual
+virtual_uid_maps =
--- /dev/null
+# Global Postfix configuration file. This file lists only a subset
+# of all parameters. For the syntax, and for a complete parameter
+# list, see the postconf(5) manual page (command: "man 5 postconf").
+#
+# For common configuration examples, see BASIC_CONFIGURATION_README
+# and STANDARD_CONFIGURATION_README. To find these documents, use
+# the command "postconf html_directory readme_directory", or go to
+# http://www.postfix.org/.
+#
+# For best results, change no more than 2-3 parameters at a time,
+# and test if Postfix still works after every change.
+
+# SOFT BOUNCE
+#
+# The soft_bounce parameter provides a limited safety net for
+# testing. When soft_bounce is enabled, mail will remain queued that
+# would otherwise bounce. This parameter disables locally-generated
+# bounces, and prevents the SMTP server from rejecting mail permanently
+# (by changing 5xx replies into 4xx replies). However, soft_bounce
+# is no cure for address rewriting mistakes or mail routing mistakes.
+#
+#soft_bounce = no
+
+# LOCAL PATHNAME INFORMATION
+#
+# The queue_directory specifies the location of the Postfix queue.
+# This is also the root directory of Postfix daemons that run chrooted.
+# See the files in examples/chroot-setup for setting up Postfix chroot
+# environments on different UNIX systems.
+#
+queue_directory = /var/spool/postfix
+
+# The command_directory parameter specifies the location of all
+# postXXX commands.
+#
+command_directory = /usr/sbin
+
+# The daemon_directory parameter specifies the location of all Postfix
+# daemon programs (i.e. programs listed in the master.cf file). This
+# directory must be owned by root.
+#
+daemon_directory = /usr/lib64/postfix
+
+# The data_directory parameter specifies the location of Postfix-writable
+# data files (caches, random numbers). This directory must be owned
+# by the mail_owner account (see below).
+#
+data_directory = /var/lib/postfix
+
+# QUEUE AND PROCESS OWNERSHIP
+#
+# The mail_owner parameter specifies the owner of the Postfix queue
+# and of most Postfix daemon processes. Specify the name of a user
+# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
+# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
+# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
+# USER.
+#
+mail_owner = postfix
+
+# The default_privs parameter specifies the default rights used by
+# the local delivery agent for delivery to external file or command.
+# These rights are used in the absence of a recipient user context.
+# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
+#
+#default_privs = nobody
+
+# INTERNET HOST AND DOMAIN NAMES
+#
+# The myhostname parameter specifies the internet hostname of this
+# mail system. The default is to use the fully-qualified domain name
+# from gethostname(). $myhostname is used as a default value for many
+# other configuration parameters.
+#
+#myhostname = host.domain.tld
+#myhostname = virtual.domain.tld
+
+# The mydomain parameter specifies the local internet domain name.
+# The default is to use $myhostname minus the first component.
+# $mydomain is used as a default value for many other configuration
+# parameters.
+#
+#mydomain = domain.tld
+
+# SENDING MAIL
+#
+# The myorigin parameter specifies the domain that locally-posted
+# mail appears to come from. The default is to append $myhostname,
+# which is fine for small sites. If you run a domain with multiple
+# machines, you should (1) change this to $mydomain and (2) set up
+# a domain-wide alias database that aliases each user to
+# user@that.users.mailhost.
+#
+# For the sake of consistency between sender and recipient addresses,
+# myorigin also specifies the default domain name that is appended
+# to recipient addresses that have no @domain part.
+#
+#myorigin = $myhostname
+#myorigin = $mydomain
+
+# RECEIVING MAIL
+
+# The inet_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on. By default,
+# the software claims all active interfaces on the machine. The
+# parameter also controls delivery of mail to user@[ip.address].
+#
+# See also the proxy_interfaces parameter, for network addresses that
+# are forwarded to us via a proxy or network address translator.
+#
+# Note: you need to stop/start Postfix when this parameter changes.
+#
+#inet_interfaces = all
+#inet_interfaces = $myhostname
+#inet_interfaces = $myhostname, localhost
+
+# The proxy_interfaces parameter specifies the network interface
+# addresses that this mail system receives mail on by way of a
+# proxy or network address translation unit. This setting extends
+# the address list specified with the inet_interfaces parameter.
+#
+# You must specify your proxy/NAT addresses when your system is a
+# backup MX host for other domains, otherwise mail delivery loops
+# will happen when the primary MX host is down.
+#
+#proxy_interfaces =
+#proxy_interfaces = 1.2.3.4
+
+# The mydestination parameter specifies the list of domains that this
+# machine considers itself the final destination for.
+#
+# These domains are routed to the delivery agent specified with the
+# local_transport parameter setting. By default, that is the UNIX
+# compatible delivery agent that lookups all recipients in /etc/passwd
+# and /etc/aliases or their equivalent.
+#
+# The default is $myhostname + localhost.$mydomain. On a mail domain
+# gateway, you should also include $mydomain.
+#
+# Do not specify the names of virtual domains - those domains are
+# specified elsewhere (see VIRTUAL_README).
+#
+# Do not specify the names of domains that this machine is backup MX
+# host for. Specify those names via the relay_domains settings for
+# the SMTP server, or use permit_mx_backup if you are lazy (see
+# STANDARD_CONFIGURATION_README).
+#
+# The local machine is always the final destination for mail addressed
+# to user@[the.net.work.address] of an interface that the mail system
+# receives mail on (see the inet_interfaces parameter).
+#
+# Specify a list of host or domain names, /file/name or type:table
+# patterns, separated by commas and/or whitespace. A /file/name
+# pattern is replaced by its contents; a type:table is matched when
+# a name matches a lookup key (the right-hand side is ignored).
+# Continue long lines by starting the next line with whitespace.
+#
+# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
+#
+#mydestination = $myhostname, localhost.$mydomain, localhost
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
+#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
+# mail.$mydomain, www.$mydomain, ftp.$mydomain
+
+# REJECTING MAIL FOR UNKNOWN LOCAL USERS
+#
+# The local_recipient_maps parameter specifies optional lookup tables
+# with all names or addresses of users that are local with respect
+# to $mydestination, $inet_interfaces or $proxy_interfaces.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown local users. This parameter is defined by default.
+#
+# To turn off local recipient checking in the SMTP server, specify
+# local_recipient_maps = (i.e. empty).
+#
+# The default setting assumes that you use the default Postfix local
+# delivery agent for local delivery. You need to update the
+# local_recipient_maps setting if:
+#
+# - You define $mydestination domain recipients in files other than
+# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
+# For example, you define $mydestination domain recipients in
+# the $virtual_mailbox_maps files.
+#
+# - You redefine the local delivery agent in master.cf.
+#
+# - You redefine the "local_transport" setting in main.cf.
+#
+# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
+# feature of the Postfix local delivery agent (see local(8)).
+#
+# Details are described in the LOCAL_RECIPIENT_README file.
+#
+# Beware: if the Postfix SMTP server runs chrooted, you probably have
+# to access the passwd file via the proxymap service, in order to
+# overcome chroot restrictions. The alternative, having a copy of
+# the system passwd file in the chroot jail is just not practical.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify a bare username, an @domain.tld
+# wild-card, or specify a user@domain.tld address.
+#
+#local_recipient_maps = unix:passwd.byname $alias_maps
+#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
+#local_recipient_maps =
+
+# The unknown_local_recipient_reject_code specifies the SMTP server
+# response code when a recipient domain matches $mydestination or
+# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
+# and the recipient address or address local-part is not found.
+#
+# The default setting is 550 (reject mail) but it is safer to start
+# with 450 (try again later) until you are certain that your
+# local_recipient_maps settings are OK.
+#
+unknown_local_recipient_reject_code = 550
+
+# TRUST AND RELAY CONTROL
+
+# The mynetworks parameter specifies the list of "trusted" SMTP
+# clients that have more privileges than "strangers".
+#
+# In particular, "trusted" SMTP clients are allowed to relay mail
+# through Postfix. See the smtpd_recipient_restrictions parameter
+# in postconf(5).
+#
+# You can specify the list of "trusted" network addresses by hand
+# or you can let Postfix do it for you (which is the default).
+#
+# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
+# clients in the same IP subnetworks as the local machine.
+# On Linux, this does works correctly only with interfaces specified
+# with the "ifconfig" command.
+#
+# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
+# clients in the same IP class A/B/C networks as the local machine.
+# Don't do this with a dialup site - it would cause Postfix to "trust"
+# your entire provider's network. Instead, specify an explicit
+# mynetworks list by hand, as described below.
+#
+# Specify "mynetworks_style = host" when Postfix should "trust"
+# only the local machine.
+#
+#mynetworks_style = class
+#mynetworks_style = subnet
+#mynetworks_style = host
+
+# Alternatively, you can specify the mynetworks list by hand, in
+# which case Postfix ignores the mynetworks_style setting.
+#
+# Specify an explicit list of network/netmask patterns, where the
+# mask specifies the number of bits in the network part of a host
+# address.
+#
+# You can also specify the absolute pathname of a pattern file instead
+# of listing the patterns here. Specify type:table for table-based lookups
+# (the value on the table right-hand side is not used).
+#
+#mynetworks = 168.100.189.0/28, 127.0.0.0/8
+#mynetworks = $config_directory/mynetworks
+#mynetworks = hash:/etc/postfix/network_table
+
+# The relay_domains parameter restricts what destinations this system will
+# relay mail to. See the smtpd_recipient_restrictions description in
+# postconf(5) for detailed information.
+#
+# By default, Postfix relays mail
+# - from "trusted" clients (IP address matches $mynetworks) to any destination,
+# - from "untrusted" clients to destinations that match $relay_domains or
+# subdomains thereof, except addresses with sender-specified routing.
+# The default relay_domains value is $mydestination.
+#
+# In addition to the above, the Postfix SMTP server by default accepts mail
+# that Postfix is final destination for:
+# - destinations that match $inet_interfaces or $proxy_interfaces,
+# - destinations that match $mydestination
+# - destinations that match $virtual_alias_domains,
+# - destinations that match $virtual_mailbox_domains.
+# These destinations do not need to be listed in $relay_domains.
+#
+# Specify a list of hosts or domains, /file/name patterns or type:name
+# lookup tables, separated by commas and/or whitespace. Continue
+# long lines by starting the next line with whitespace. A file name
+# is replaced by its contents; a type:name table is matched when a
+# (parent) domain appears as lookup key.
+#
+# NOTE: Postfix will not automatically forward mail for domains that
+# list this system as their primary or backup MX host. See the
+# permit_mx_backup restriction description in postconf(5).
+#
+#relay_domains = $mydestination
+
+# INTERNET OR INTRANET
+
+# The relayhost parameter specifies the default host to send mail to
+# when no entry is matched in the optional transport(5) table. When
+# no relayhost is given, mail is routed directly to the destination.
+#
+# On an intranet, specify the organizational domain name. If your
+# internal DNS uses no MX records, specify the name of the intranet
+# gateway host instead.
+#
+# In the case of SMTP, specify a domain, host, host:port, [host]:port,
+# [address] or [address]:port; the form [host] turns off MX lookups.
+#
+# If you're connected via UUCP, see also the default_transport parameter.
+#
+#relayhost = $mydomain
+#relayhost = [gateway.my.domain]
+#relayhost = [mailserver.isp.tld]
+#relayhost = uucphost
+#relayhost = [an.ip.add.ress]
+
+# REJECTING UNKNOWN RELAY USERS
+#
+# The relay_recipient_maps parameter specifies optional lookup tables
+# with all addresses in the domains that match $relay_domains.
+#
+# If this parameter is defined, then the SMTP server will reject
+# mail for unknown relay users. This feature is off by default.
+#
+# The right-hand side of the lookup tables is conveniently ignored.
+# In the left-hand side, specify an @domain.tld wild-card, or specify
+# a user@domain.tld address.
+#
+#relay_recipient_maps = hash:/etc/postfix/relay_recipients
+
+# INPUT RATE CONTROL
+#
+# The in_flow_delay configuration parameter implements mail input
+# flow control. This feature is turned on by default, although it
+# still needs further development (it's disabled on SCO UNIX due
+# to an SCO bug).
+#
+# A Postfix process will pause for $in_flow_delay seconds before
+# accepting a new message, when the message arrival rate exceeds the
+# message delivery rate. With the default 100 SMTP server process
+# limit, this limits the mail inflow to 100 messages a second more
+# than the number of messages delivered per second.
+#
+# Specify 0 to disable the feature. Valid delays are 0..10.
+#
+#in_flow_delay = 1s
+
+# ADDRESS REWRITING
+#
+# The ADDRESS_REWRITING_README document gives information about
+# address masquerading or other forms of address rewriting including
+# username->Firstname.Lastname mapping.
+
+# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
+#
+# The VIRTUAL_README document gives information about the many forms
+# of domain hosting that Postfix supports.
+
+# "USER HAS MOVED" BOUNCE MESSAGES
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# TRANSPORT MAP
+#
+# See the discussion in the ADDRESS_REWRITING_README document.
+
+# ALIAS DATABASE
+#
+# The alias_maps parameter specifies the list of alias databases used
+# by the local delivery agent. The default list is system dependent.
+#
+# On systems with NIS, the default is to search the local alias
+# database, then the NIS alias database. See aliases(5) for syntax
+# details.
+#
+# If you change the alias database, run "postalias /etc/aliases" (or
+# wherever your system stores the mail alias file), or simply run
+# "newaliases" to build the necessary DBM or DB file.
+#
+# It will take a minute or so before changes become visible. Use
+# "postfix reload" to eliminate the delay.
+#
+#alias_maps = dbm:/etc/aliases
+#alias_maps = hash:/etc/aliases
+#alias_maps = hash:/etc/aliases, nis:mail.aliases
+#alias_maps = netinfo:/aliases
+
+# The alias_database parameter specifies the alias database(s) that
+# are built with "newaliases" or "sendmail -bi". This is a separate
+# configuration parameter, because alias_maps (see above) may specify
+# tables that are not necessarily all under control by Postfix.
+#
+#alias_database = dbm:/etc/aliases
+#alias_database = dbm:/etc/mail/aliases
+#alias_database = hash:/etc/aliases
+#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
+
+# ADDRESS EXTENSIONS (e.g., user+foo)
+#
+# The recipient_delimiter parameter specifies the separator between
+# user names and address extensions (user+foo). See canonical(5),
+# local(8), relocated(5) and virtual(5) for the effects this has on
+# aliases, canonical, virtual, relocated and .forward file lookups.
+# Basically, the software tries user+foo and .forward+foo before
+# trying user and .forward.
+#
+#recipient_delimiter = +
+
+# DELIVERY TO MAILBOX
+#
+# The home_mailbox parameter specifies the optional pathname of a
+# mailbox file relative to a user's home directory. The default
+# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
+# "Maildir/" for qmail-style delivery (the / is required).
+#
+#home_mailbox = Mailbox
+#home_mailbox = Maildir/
+
+# The mail_spool_directory parameter specifies the directory where
+# UNIX-style mailboxes are kept. The default setting depends on the
+# system type.
+#
+#mail_spool_directory = /var/mail
+#mail_spool_directory = /var/spool/mail
+
+# The mailbox_command parameter specifies the optional external
+# command to use instead of mailbox delivery. The command is run as
+# the recipient with proper HOME, SHELL and LOGNAME environment settings.
+# Exception: delivery for root is done as $default_user.
+#
+# Other environment variables of interest: USER (recipient username),
+# EXTENSION (address extension), DOMAIN (domain part of address),
+# and LOCAL (the address localpart).
+#
+# Unlike other Postfix configuration parameters, the mailbox_command
+# parameter is not subjected to $parameter substitutions. This is to
+# make it easier to specify shell syntax (see example below).
+#
+# Avoid shell meta characters because they will force Postfix to run
+# an expensive shell process. Procmail alone is expensive enough.
+#
+# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
+# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
+#
+#mailbox_command = /some/where/procmail
+#mailbox_command = /some/where/procmail -a "$EXTENSION"
+
+# The mailbox_transport specifies the optional transport in master.cf
+# to use after processing aliases and .forward files. This parameter
+# has precedence over the mailbox_command, fallback_transport and
+# luser_relay parameters.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#mailbox_transport = lmtp:unix:/file/name
+#mailbox_transport = cyrus
+
+# The fallback_transport specifies the optional transport in master.cf
+# to use for recipients that are not found in the UNIX passwd database.
+# This parameter has precedence over the luser_relay parameter.
+#
+# Specify a string of the form transport:nexthop, where transport is
+# the name of a mail delivery transport defined in master.cf. The
+# :nexthop part is optional. For more details see the sample transport
+# configuration file.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must update the "local_recipient_maps" setting in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#fallback_transport = lmtp:unix:/file/name
+#fallback_transport = cyrus
+#fallback_transport =
+
+# The luser_relay parameter specifies an optional destination address
+# for unknown recipients. By default, mail for unknown@$mydestination,
+# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
+# as undeliverable.
+#
+# The following expansions are done on luser_relay: $user (recipient
+# username), $shell (recipient shell), $home (recipient home directory),
+# $recipient (full recipient address), $extension (recipient address
+# extension), $domain (recipient domain), $local (entire recipient
+# localpart), $recipient_delimiter. Specify ${name?value} or
+# ${name:value} to expand value only when $name does (does not) exist.
+#
+# luser_relay works only for the default Postfix local delivery agent.
+#
+# NOTE: if you use this feature for accounts not in the UNIX password
+# file, then you must specify "local_recipient_maps =" (i.e. empty) in
+# the main.cf file, otherwise the SMTP server will reject mail for
+# non-UNIX accounts with "User unknown in local recipient table".
+#
+#luser_relay = $user@other.host
+#luser_relay = $local@other.host
+#luser_relay = admin+$local
+
+# JUNK MAIL CONTROLS
+#
+# The controls listed here are only a very small subset. The file
+# SMTPD_ACCESS_README provides an overview.
+
+# The header_checks parameter specifies an optional table with patterns
+# that each logical message header is matched against, including
+# headers that span multiple physical lines.
+#
+# By default, these patterns also apply to MIME headers and to the
+# headers of attached messages. With older Postfix versions, MIME and
+# attached message headers were treated as body text.
+#
+# For details, see "man header_checks".
+#
+#header_checks = regexp:/etc/postfix/header_checks
+
+# FAST ETRN SERVICE
+#
+# Postfix maintains per-destination logfiles with information about
+# deferred mail, so that mail can be flushed quickly with the SMTP
+# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
+# See the ETRN_README document for a detailed description.
+#
+# The fast_flush_domains parameter controls what destinations are
+# eligible for this service. By default, they are all domains that
+# this server is willing to relay mail to.
+#
+#fast_flush_domains = $relay_domains
+
+# SHOW SOFTWARE VERSION OR NOT
+#
+# The smtpd_banner parameter specifies the text that follows the 220
+# code in the SMTP server's greeting banner. Some people like to see
+# the mail version advertised. By default, Postfix shows no version.
+#
+# You MUST specify $myhostname at the start of the text. That is an
+# RFC requirement. Postfix itself does not care.
+#
+#smtpd_banner = $myhostname ESMTP $mail_name
+#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
+
+# PARALLEL DELIVERY TO THE SAME DESTINATION
+#
+# How many parallel deliveries to the same user or domain? With local
+# delivery, it does not make sense to do massively parallel delivery
+# to the same user, because mailbox updates must happen sequentially,
+# and expensive pipelines in .forward files can cause disasters when
+# too many are run at the same time. With SMTP deliveries, 10
+# simultaneous connections to the same domain could be sufficient to
+# raise eyebrows.
+#
+# Each message delivery transport has its XXX_destination_concurrency_limit
+# parameter. The default is $default_destination_concurrency_limit for
+# most delivery transports. For the local delivery agent the default is 2.
+
+#local_destination_concurrency_limit = 2
+#default_destination_concurrency_limit = 20
+
+# DEBUGGING CONTROL
+#
+# The debug_peer_level parameter specifies the increment in verbose
+# logging level when an SMTP client or server host name or address
+# matches a pattern in the debug_peer_list parameter.
+#
+debug_peer_level = 2
+
+# The debug_peer_list parameter specifies an optional list of domain
+# or network patterns, /file/name patterns or type:name tables. When
+# an SMTP client or server host name or address matches a pattern,
+# increase the verbose logging level by the amount specified in the
+# debug_peer_level parameter.
+#
+#debug_peer_list = 127.0.0.1
+#debug_peer_list = some.domain
+
+# The debugger_command specifies the external command that is executed
+# when a Postfix daemon program is run with the -D option.
+#
+# Use "command .. & sleep 5" so that the debugger can attach before
+# the process marches on. If you use an X-based debugger, be sure to
+# set up your XAUTHORITY environment variable before starting Postfix.
+#
+debugger_command =
+ PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
+ ddd $daemon_directory/$process_name $process_id & sleep 5
+
+# If you can't use X, use this to capture the call stack when a
+# daemon crashes. The result is in a file in the configuration
+# directory, and is named after the process name and the process ID.
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
+# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
+# >$config_directory/$process_name.$process_id.log & sleep 5
+#
+# Another possibility is to run gdb under a detached screen session.
+# To attach to the screen sesssion, su root and run "screen -r
+# <id_string>" where <id_string> uniquely matches one of the detached
+# sessions (from "screen -list").
+#
+# debugger_command =
+# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
+# -dmS $process_name gdb $daemon_directory/$process_name
+# $process_id & sleep 1
+
+# INSTALL-TIME CONFIGURATION INFORMATION
+#
+# The following parameters are used when installing a new Postfix version.
+#
+# sendmail_path: The full pathname of the Postfix sendmail command.
+# This is the Sendmail-compatible mail posting interface.
+#
+sendmail_path = /usr/sbin/sendmail
+
+# newaliases_path: The full pathname of the Postfix newaliases command.
+# This is the Sendmail-compatible command to build alias databases.
+#
+newaliases_path = /usr/bin/newaliases
+
+# mailq_path: The full pathname of the Postfix mailq command. This
+# is the Sendmail-compatible mail queue listing command.
+#
+mailq_path = /usr/bin/mailq
+
+# setgid_group: The group for mail submission and queue management
+# commands. This must be a group name with a numerical group ID that
+# is not shared with other accounts, not even with the Postfix account.
+#
+setgid_group = postdrop
+
+# html_directory: The location of the Postfix HTML documentation.
+#
+html_directory = /usr/share/doc/postfix-2.8.7/html
+
+# manpage_directory: The location of the Postfix on-line manual pages.
+#
+manpage_directory = /usr/share/man
+
+# sample_directory: The location of the Postfix sample configuration files.
+# This parameter is obsolete as of Postfix 2.1.
+#
+sample_directory = /etc/postfix
+
+# readme_directory: The location of the Postfix README files.
+#
+readme_directory = /usr/share/doc/postfix-2.8.7/readme
+home_mailbox = .maildir/
projects / config / bruni / etc.git / commitdiff