+++ /dev/null
-*********************************************\r
-\r
-LSI Corp. MegaRAID MegaCLI Release \r
-\r
-*********************************************\r
-\r
-Release Date: 03/02/13\r
-========================\r
-\r
-Supported Controllers\r
-==================\r
-\r
-MegaRAID SAS 9270-8i \r
-MegaRAID SAS 9271-4i \r
-MegaRAID SAS 9271-8i \r
-MegaRAID SAS 9271-8iCC \r
-MegaRAID SAS 9286-8e \r
-MegaRAID SAS 9286CV-8e \r
-MegaRAID SAS 9286CV-8eCC\r
-MegaRAID SAS 9265-8i\r
-MegaRAID SAS 9285-8e\r
-MegaRAID SAS 9240-4i\r
-MegaRAID SAS 9240-8i\r
-MegaRAID SAS 9260-4i\r
-MegaRAID SAS 9260CV-4i\r
-MegaRAID SAS 9260-8i\r
-MegaRAID SAS 9260CV-8i\r
-MegaRAID SAS 9260DE-8i\r
-MegaRAID SAS 9261-8i\r
-MegaRAID SAS 9280-4i4e\r
-MegaRAID SAS 9280-8e\r
-MegaRAID SAS 9280DE-8e\r
-MegaRAID SAS 9280-24i4e\r
-MegaRAID SAS 9280-16i4e\r
-MegaRAID SAS 9260-16i\r
-MegaRAID SAS 9266-4i\r
-MegaRAID SAS 9266-8i\r
-MegaRAID SAS 9285CV-8e\r
-MegaRAID SAS 8704ELP\r
-MegaRAID SAS 8704EM2\r
-MegaRAID SAS 8708ELP\r
-MegaRAID SAS 8708EM2 \r
-MegaRAID SAS 8880EM2\r
-MegaRAID SAS 8888ELP\r
-MegaRAID SAS 8308ELP*\r
-MegaRAID SAS 8344ELP*\r
-MegaRAID SAS 84016E*\r
-MegaRAID SAS 8408E*\r
-MegaRAID SAS 8480E*\r
-MegaRAID SATA 300-8ELP*\r
-\r
-*These older controllers should work but have not been tested.\r
-\r
-\r
-Component:\r
-=========\r
-SAS MegaRAID MegaCLI\r
-Release Date: 03/02/13\r
-\r
-\r
-Version Numbers: MegaCLI\r
-=============== =========== \r
-Current Version 8.07.07\r
-Previous Version 8.07.06\r
-\r
-\r
-Contents:\r
-=========\r
-This package contains MegaCLI for the following OSes:\r
-DOS (version 8.07.06)\r
-FreeBSD\r
-Linux\r
-Solaris\r
-VMware\r
-VMwareMN\r
-Windows\r
-EFI (version 8.07.06)\r
-\r
-Use the MegaCLI components from the folder that matches your OS.\r
-\r
-\r
-Enhancements and Bug Fixes\r
-==========================\r
-\r
-SCGCQ00332212 (DFCT) - libsysfs custom implementation issue.\r
-SCGCQ00345839 (DFCT) - While the BBU is fully charged, megacli adpbbucmd reports that it is both discharging and not discharging\r
-SCGCQ00355536 (DFCT) - MegaCli and StorCli can not manage both controllers of different types n the same system under FreeBSD\r
-SCGCQ00362808 (DFCT) - MegaCli 32 Crashes in Windows in specific system\r
-SCGCQ00364411 (DFCT) - Segmentation Fault while running discard preserved cache in megacli\r
-\r
-\r
-Installation Commands: \r
-=======================\r
-Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
-\r
-\r
-\r
-=====================================\r
-=====================================\r
-Previous Releases:\r
-=====================================\r
-=====================================\r
-\r
-Component:\r
-=========\r
-SAS MegaRAID MegaCLI\r
-Release Date: 12/28/12\r
-\r
-\r
-Version Numbers: MegaCLI\r
-=============== =========== \r
-Current Version 8.07.06\r
-Previous Version 8.05.06\r
-\r
-\r
-Contents:\r
-=========\r
-This package contains MegaCLI for the following OSes:\r
-DOS\r
-FreeBSD\r
-Linux\r
-Solaris\r
-VMware\r
-Windows\r
-EFI\r
-\r
-Use the MegaCLI components from the folder that matches your OS.\r
-\r
-\r
-Enhancements and Bug Fixes\r
-==========================\r
-\r
-SCGCQ00289583 Defect CLI CfgLDAdd reports invalid token when -Force and -enblPI are used together\r
-SCGCQ00289585 Defect Command line generated along with press any key in help file operation\r
-SCGCQ00315805 Defect Change the UI fro "adpBBucmd getbbumodes a0" command\r
-SCGCQ00317547 Defect MegaCLI misspell the word "transparent" in bbu mode display\r
-SCGCQ00318648 Defect VD creation on regular drives fails for older firmware where 4K sector is not supported\r
-SCGCQ00319423 Defect FreeBSD MegaCLI v8.05.02 does not detect controller when driver 5.504.05.00 is loaded\r
-SCGCQ00324031 Defect MegaCLI 8.04.07 output typos\r
-SCGCQ00324525 Defect MegaCLI: MFI_STAT_NOT_FOUND returns when retrieving the FW event log.\r
-SCGCQ00325890 Defect CLI/Segmentation fault while running pdlist and cfgdsply in CentOS\r
-SCGCQ00326673 Defect 5.5 CLI Version 8.07.00/Unable to flash the controller's FW using CLI\r
-SCGCQ00327929 Defect Command to enable Patrol Read on SSDs controller property is not shown in Help\r
-SCGCQ00331576 Defect LSI MegaCLI EncInfo (Enclosure Info) duplicates the first power supply status data to both power supplies\r
-SCGCQ00333070 Defect make files updates\r
-SCGCQ00333590 Defect MegaCLI 8.04.07 output typos\r
-SCGCQ00336434 Defect MegaCli reports wrong properties for VD.\r
-SCGCQ00337213 Defect FW reports exit code 0x3d (Unsupported HWR) when getting bbu capacity info for Supercap\r
-SCGCQ00337810 Defect 37 drives shown as unconfigured good in MegaCLI when "enable JBOD=0"\r
-SCGCQ00339405 Defect MegaCLI does not display correct adpBIOS mode using "adpBIOS dsply" command\r
-SCGCQ00341724 Defect FW allows a firmware to be flashed through Online FW Update method in DOS and then breaks into montask\r
-SCGCQ00342848 Defect Add Adapter restart support in CLI\r
-SCGCQ00342993 Defect Add Adapter restart support in CLI\r
-SCGCQ00343308 Defect MegaCLI online help display for "adpBIOS" is not align correctly\r
-SCGCQ00343310 Defect MegaCLI "adpBIOS dsply" command does not display correct information when set to BE or SOE\r
-SCGCQ00344574 Defect MegaCLI does not prompt user to reboot after update firmware\r
-SCGCQ00352210 Defect MegaCli pdFwDownload fails on a SATA drive with an interposer\r
-SCGCQ00353584 Defect CLI has to refresh the MR_CTRL_INFO after the MR_DCMD_CTRL_FLASH_FW_DOWNLOAD for OFU.\r
-SCGCQ00356037 Defect CLI Crashes When Running ADP FW Flash Command\r
-SCGCQ00356190 Defect No controller properties for Online FW Update in MegaCLi\r
-SCGCQ00318641 EnhancementRequest True Online Firmware Update\r
-SCGCQ00322216 EnhancementRequest Help files for Perfmode in adp(set/get)prop are added.\r
-SCGCQ00322234 EnhancementRequest Utilities to show logical block size [AF512e, 512n, 4Kn,..]\r
-SCGCQ00322257 EnhancementRequest Implemented support for 4K sector drives in CLI.\r
-SCGCQ00322317 EnhancementRequest 4k sector support in LIBMODS\r
-SCGCQ00334377 EnhancementRequest Resurrect ARA option in CLI\r
-SCGCQ00338696 EnhancementRequest powershell support for MegaCli\r
-\r
-\r
-Installation Commands: \r
-=======================\r
-Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
-\r
-\r
-\r
-\r
-Component:\r
-=========\r
-SAS MegaRAID MegaCLI\r
-Release Date: 10/08/12\r
-\r
-\r
-Version Numbers: MegaCLI\r
-=============== =========== \r
-Current Version 8.05.06\r
-Previous Version 8.04.07\r
-\r
-\r
-Contents:\r
-=========\r
-This package contains MegaCLI for the following OSes:\r
-DOS\r
-FreeBSD\r
-Linux\r
-Solaris\r
-VMware\r
-Windows\r
-EFI\r
-\r
-Use the MegaCLI components from the folder that matches your OS.\r
-\r
-\r
-Enhancements and Bug Fixes\r
-==========================\r
-LSIP200233163 (DFCT) improve the manner and customer experience of transitioning from MR mode to iMR \r
-LSIP200233100 (DFCT) MR5.4 MegaCli - does not recognize the adapter \r
-LSIP200233107 (DFCT) Error message displayed while creating VD in SLESS 11 SP2 \r
-LSIP200245985 (DFCT) Load address change for PCLI \r
-LSIP200233342 (DFCT) Error message displayed while deleting all ld's in MegaCLI, SLESS11 sp2 \r
-LSIP200232922 (DFCT) MegaCLI misspell the word "package" as "pakage" under ctrl version and it does not displays firmware version \r
-LSIP200232921 (DFCT) MegaCLI displays version for PD in unclear format and the data is not aligned correctly \r
-LSIP200232954 (DFCT) Need to Support all the MFC default values in the command AdpSettings. \r
-LSIP200245968 (DFCT) In EFICLI not able to flash latest firmware to controller without using -nosigchk -noverchk option. \r
-LSIP200233079 (DFCT) Redesign battery changes \r
-LSIP200232955 (DFCT) Porting CLI MR5.3 defect (LSIP200232645) \r
-LSIP200233047 (DFCT) Throwing exception while erasing VD with user given patterns \r
-LSIP200245889 (DFCT) Battery Changes \r
-LSIP200232929 (DFCT) LSIP200211349 (PR NO)- MegaCLI for uEFI \r
-LSIP200233314 (DFCT) Pcilinkspeedset and adpdowngrade cmds are not working and Need to update Help page \r
-LSIP200232870 (DFCT) Add a Gen2 to Gen3 toggle function and a check for the PCI speed to MegaSCU/CLI [ PR : LSIP200231423 ] \r
-LSIP200232927 (DFCT) Port PR 198414 to MR5.4 (Headless Boot) to TB [ PR: LSIP200229508] \r
-LSIP200232044 (DFCT) MegaCli causes "unexpected sense" and "illegal request" on HDDs \r
-LSIP200233041 (DFCT) MegaCli -ShowSummary display incorrect LD info \r
-LSIP200232675 (DFCT) (RP LSIP200232646) "Disk Cache Policy" default setting is set to "Unchanged" needs to be set to "Disabled" \r
-LSIP200232713 (DFCT) CLI is displaying the message to Use Force option when using cfglddel to try to delete a CC VD. \r
-LSIP200232645 (DFCT) Cannot clear a CC Drive Group using MegaCli64.exe in Windows \r
-LSIP200246111 (DFCT) Megacli tool stops working while executing adpeventlog commands. \r
-LSIP200246081 (DFCT) Any junk character after the help command executes with an incomplete output and exits with no error. \r
-LSIP200246117 (DFCT) Output correction required for BBU status. \r
-LSIP200246078 (DFCT) Enclosure information not displayed.\r
-SCGCQ00317021 (DFCT) MegaCLI ldinfo does not display correct information under FreeBSD\r
-SCGCQ00317547 (DFCT) MegaCLI misspell the word "transparent" in bbu mode display\r
-SCGCQ00319423 (DFCT) FreeBSD MegaCLI v8.05.02 does not detect controller when driver 5.504.05.00 is loaded\r
-\r
-\r
-Installation Commands: \r
-=======================\r
-Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
-\r
-\r
-\r
-\r
-\r
-Component:\r
-=========\r
-SAS MegaRAID MegaCLI\r
-Release Date: 06/18/12\r
-\r
-\r
-Version Numbers: MegaCLI\r
-=============== =========== \r
-Current Version 8.04.07\r
-Previous Version 8.02.21\r
-\r
-\r
-Contents:\r
-=========\r
-This package contains MegaCLI for the following OSes:\r
-DOS\r
-FreeBSD\r
-Linux\r
-Solaris\r
-VMware\r
-Windows\r
-\r
-Use the MegaCLI components from the folder that matches your OS.\r
-\r
-\r
-Enhancements and Bug Fixes\r
-==========================\r
-LSIP200223580 (CO) EfiHostCli.efi should be able to save raid configuration to a file, similar to MegaCli \r
-LSIP200210362 (CO) Update CacheCade product names in all utilities and user manuals \r
-LSIP200212698 (CO) MR: MegaCLI should warn user that they should reboot immediately after flashing \r
-LSIP200212693 (CO) Real Time Scheduler for Relearn \r
-LSIP200199668 (CO) End to End Data Protection (EEDP) \r
-LSIP200210405 (CO) Enable copy back on SMART - TB \r
-LSIP200209945 (CO) Generally available support of selected battery modes for iBBU08. \r
-LSIP200230177 (DFCT) battery operational status is not proper \r
-LSIP200231521 (DFCT) forward porting of defect id:LSIP200230223 and LSIP200230629 \r
-LSIP200232675 (DFCT) (RP LSIP200232646) "Disk Cache Policy" default setting is set to "Unchanged" needs to be set to "Disabled" \r
-LSIP200223837 (DFCT) Time/Date stamp does not match with the respective CDB's displayed in Drive Performance Monitor(DPM) command. \r
-LSIP200230994 (DFCT) (Defer LSIP200230558) CLI/Emergency hotspare status is being displayed for UG drives when UG for Emergency is disabled \r
-LSIP200231392 (DFCT) FW broke at MonTask: line 278 in file ../../raid/1078int.c while running EFI CLI "adpallinfo -a0 page" \r
-LSIP200232089 (DFCT) Uefi cli help does not show commad adpget/set patrolread rate in help file which is supported on SWR controller. \r
-LSIP200232282 (DFCT) 512E drive Support Changes is ported from MR 5.2 to MR 5.3 \r
-LSIP200232497 (DFCT) Discard Cache command should remove the blocked access on an Virtual Drive \r
-LSIP200232713 (DFCT) CLI is displaying the message to Use Force option when using cfglddel to try to delete a CC VD. \r
-LSIP200232645 (DFCT) Cannot clear a CC Drive Group using MegaCli64.exe in Windows \r
-LSIP200230035 (DFCT) move MegaCli changes for CCoH to 5.3 stream \r
-LSIP200229563 (DFCT) The Exit code displayed for the command \93MegaCli64 ccoh adcdev \94 is not correct. \r
-LSIP200231249 (DFCT) Resolve MegaCli compilation issues \r
-LSIP200229476 (DFCT) Rename all external references to CCoH to new marketing name \r
-LSIP200230456 (DFCT) Handle review comments for MegaCli merged code \r
-LSIP200231215 (DFCT) RHel5.7: trying to add vd having lvm configuration to cachegroup throws internal error \r
-LSIP200231532 (DFCT) Display dev busy while adding vd when storelib returns busy and fix MegaOEM compilation issue \r
-LSIP200231655 (DFCT) Sprint5-Build14- Name of the Cache Group has to be changed \r
-LSIP200231658 (DFCT) Remove CCoH referemnce in warpdriveinfo command (CCoH License) \r
-LSIP200231805 (DFCT) check in latest linux storelib library build to MegaCli \r
-LSIP200231838 (DFCT) check in ccoh readme file to MegaCli \r
-LSIP200232318 (DFCT) Update the SLIR2 point release 5 binary in MegaCLI stream \r
-LSIP200232229 (DFCT) In the Linux MegaCLI readme file mention that lib_Utils2-1.xxx.rpm but I don\92t find this file along with megaCLI. \r
-LSIP200230107 (DFCT) AdpHWdevice command is unsupported in DOS MegaOEM \r
-LSIP200231053 (DFCT) MegaCLI help for "perfmon" command contains mispell word "minuts" \r
-LSIP200230224 (DFCT) PDlist command is removing in between lines while printing \r
-LSIP200230506 (DFCT) ProgDsply option is not working in VMWare MegaCli \r
-LSIP200210421 (DFCT) Cannot flash the 16MB FW file in Dos based Megacli \r
-LSIP200212540 (DFCT) (RW LSIP200187758) Installation of MegaSCU failed dependencies error-RH6x64bit OS \r
-LSIP200223206 (DFCT) Porting from 11M08 to MR 5.2 \r
-LSIP200224089 (DFCT) AdpNvram clear command is not working for IMR controller \r
-LSIP200223716 (DFCT) (RW LSIP200222444) CLI getbbumodes returns Failed \r
-LSIP200223718 (DFCT) (RW LSIP200222444) CLI getbbumodes returns Failed \r
-LSIP200224510 (DFCT) MegaCLI online help need to format with only 80 characters per line \r
-LSIP200231426 (DFCT) MegaSCU AdpSettings can't program controller with an init file \r
-LSIP200224890 (DFCT) MegaCLI64-bit does not detect TB controller on RHEL 6.1 64-bit [ issue fixed in 11M08 porting to MR 5.2 ] \r
-LSIP200222839 (DFCT) MegaCli BBUStatus cmd shows inconsistent values for different BBU types \r
-LSIP200209267 (DFCT) MegaCli does not show correct capacity information for SuperCap \r
-LSIP200210113 (DFCT) Naming convention for CacheCade (Instead of IR using Defect) \r
-LSIP200210861 (DFCT) This defect for forward porting and backward porting of PR-LSIP200187637\r
-LSIP200210741 (DFCT) help file not updated with method to set the bbumode \r
-LSIP200210670 (DFCT) CLI sees characters "\n" in adpbbucmd command before Transparent Learn string for supercap \r
-LSIP200098881 (DFCT) (RW LSIP200086230) Different TimeStamps values in MegaCLI Ctrl Eventlog \r
-LSIP200212405 (DFCT) Online help for MegaCLI displays "PreventPIImport" as "PeventPIImport" \r
-LSIP200223256 (DFCT) Due to PR:LSIP200122939 scoping has been changed, need to take off the old chagnes. \r
-LSIP200223574 (DFCT) Cannot set BBU modes using "adpbbucmd SetBbuProperties" command \r
-LSIP200224091 (DFCT) PR:LSIP200122939:Real Time Scheduler for Relearn : Scoping has been changed, changing the code accordingly. \r
-LSIP200224227 (DFCT) CLI setting some other day of the week instead of particular Day \r
-LSIP200224179 (DFCT) Memory violation for day value(DDD) is diffrent from days of week. \r
-LSIP200224241 (DFCT) Show battery capacity info (runTimeToEmpty,averageTimeToEmpty and averageTimeToFull) in human read able form. \r
-LSIP200224119 (DFCT) Need to block Set BBU properties command for TMMC battery type with transparent Learn. \r
-LSIP200224394 (DFCT) CLI not showing 'none' for 'next learn time' when 'auto learn mode' is 'Warn via Event' or 'Disabled' in bbu proeprties \r
-LSIP200224697 (DFCT) When fire "AdpBBucmd schedulelearn DSbl a0" command then showing improper message "Controller not supported" \r
-LSIP200224836 (DFCT) Installation Linux VMWare : missing libraries \r
-LSIP200224515 (DFCT) MegaCLI displays schedule time in a strange format \r
-LSIP200225004 (DFCT) In CLI For DST zone "adpbbucmd schedulelearn setstarttime mon 7 a0" command setting it on 5 AM not 7 AM \r
-LSIP200224937 (DFCT) ADRA(Adaptive Read Aead) is stil supported in CLI that not supported in FW. Remove it from all supported commands. \r
-LSIP200229523 (DFCT) (RW LSIP200224515) MegaCLI displays schedule time in a strange format \r
-LSIP200229697 (DFCT) CLI setting DiskCachePolicy as unchanged instead of Disabled for OEM. \r
-LSIP200212808 (DFCT) Porting of defect changes done in 11M02 to PERC 8.1 \r
-LSIP200211426 (DFCT) Using Megacli able to create a VD with MAX Powersave policy when disablePowerSavings set to 14 \r
-LSIP200212401 (DFCT) Execute MegaCli64 in FreeBSD 8.2x64bit got Permission denied \r
-LSIP200212887 (DFCT) Creating VD using MegaCli/MegaCli64 in FreeBSD return "No match" error \r
-LSIP200221351 (DFCT) Defect to check-in the file changes done for building a vib package of VMware_MN \r
-LSIP200076838 (DFCT) "Invalid Key:CHTIMER\94 While we were changed only BGI, Stripsize. Flush time. \r
-LSIP200223800 (DFCT) Change the word "Spun" to "Spin" to correct grammar for default response text \r
-LSIP200223832 (DFCT) MWCLI: Syntax to Set property for needs to be changed AutoSnapshotSpace. \r
-LSIP200223830 (DFCT) MWCLI: Syntax to Set property for needs to be changed DefaultSnapshotSpace. \r
-LSIP200224773 (DFCT) MegaCLI:BBU Information is not alligned properly \r
-LSIP200224837 (DFCT) Windows_VMWare_KL: Driver version not available \r
-LSIP200211840 (DFCT) Portings from 11M08 \r
-LSIP200211838 (DFCT) New PCLI with new load addresss for 1_TB support \r
-LSIP200212583 (DFCT) 11M08 portings \r
-LSIP200222609 (DFCT) adpbbucmd getbbumodes does not displays any information as indicated on the help \r
-LSIP200230220 (DFCT) FreeBSD MegaCli no 64bit available - both are 32 bit \r
-LSIP200221349 (DFCT) CfgAllFreeDrv command detailed online help is not updated properly \r
-LSIP200221568 (DFCT) MegaCLI help for adpbbucmd contains multiple misspell words \r
-LSIP200196784 (DFCT) MegaCli : Unable to create Cachecade VD using Megacli \r
-LSIP200209883 (DFCT) Issue in verifying CC2.0 feature support bit in CLI. \r
-LSIP200209882 (DFCT) Add CtrlId information as part AdpAllInfo command. \r
-LSIP200070255 (DFCT) (RW LSIP200055580) MegaCli 80015 for Sparc missing OS version number \r
-LSIP200199421 (DFCT) MegaCli Online help need to provide more information for commands with a "filename" input \r
-LSIP200167604 (DFCT) After unzipping VMWare MegaCLI and executing it reports "Permission Denied" \r
-LSIP200199125 (DFCT) Macon MegaDCli : MegaDcli application hangs after creating the any VD. \r
-LSIP200199605 (DFCT) SW-Macon : Could not create multiple VDs in same array with DOSCLI \r
-LSIP200200420 (DFCT) SCU DCLI: DCLI fails to display temparature of SATA drives, however, OS level apps( CLI and MSM) show the same \r
-LSIP200200257 (DFCT) Not able to set the link speed to 6GB/s as per the information given in the help using MegaCli. \r
-LSIP200209972 (DFCT) M0flashing is not working with Dos based Megascu \r
-LSIP200200461 (DFCT) Enhanced Import option fails to be enabled \r
-\r
-\r
-Installation Commands: \r
-=======================\r
-Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
-\r
-\r
-\r
-\r
-Component:\r
-=========\r
-SAS MegaRAID MegaCLI\r
-Release Date: 03/30/12\r
-\r
-\r
-Version Numbers: MegaCLI\r
-=============== =========== \r
-Current Version 8.02.21\r
-Previous Version 8.02.16\r
-\r
-\r
-Contents:\r
-=========\r
-This package contains MegaCLI for the following OSes:\r
-DOS\r
-FreeBSD\r
-Linux\r
-Solaris\r
-VMware\r
-Windows\r
-\r
-Use the MegaCLI components from the folder that matches your OS.\r
-\r
-\r
-Enhancements and Bug Fixes\r
-==========================\r
-LSIP200149500 (DFCT) Macon:SCU:System hangs during DCLI/ESRT2 commanad execution when both the controllers(AHCI and SCU) are enabled in bios. \r
-LSIP200185414 (DFCT) MegaCLI does not return any value for Driver version. \r
-LSIP200151500 (DFCT) MegaCli packages for both SPARC and x86 do not verify architecture ty \r
-LSIP200185426 (DFCT) Enclosure info gives segmentation fault in cli \r
-LSIP200149492 (DFCT) Help for Drive Performance Monitoring commands is not available. \r
-LSIP200186064 (DFCT) There is no return message in EFI if you try to create more than 8 VD \r
-LSIP200151323 (DFCT) Remaining Capacity Alarm is set to Yes for iBBU08 as displayed by MegaCli but it should not. \r
-LSIP200149845 (DFCT) "Inquiry Data" info differs from SPARC with SSDs attached \r
-LSIP200186189 (DFCT) Need the ability to deselect through MegaCLI bootable drives from boot list \r
-LSIP200184706 (DFCT) When checking rebuild state of PD using progdsply in EFI, screen keeps on running though esc key pressed \r
-LSIP200185859 (DFCT) CLI BBU design information does not show correct values with supercap present. \r
-LSIP200148605 (CR) Ability to get settings for delaySOD paramaters using MegaOEM or MegaCLI \r
-LSIP200151127 (CR) Add Ubuntu support to MegaCLI \r
-LSIP200082222 (CR) MR port to Invader \r
-LSIP200082262 (CR) 12 Gb/s functionality \r
-LSIP200083522 (CR) Need the ability to deselect through MegaCLI bootable drives from boot list \r
-LSIP200188010 (DFCT) Various commands failed on MegaCLI 8.02.18 when running BST - See below \r
-LSIP200196726 (DFCT) In AdpBbuCmd -SetBbuProperties command AutoLearnMode can set even transparentLearns field is non zero \r
-LSIP200166747 (CR) Add SGPIO for Medusa \r
-LSIP200185421 (CR) Request to include Megascu read of BMU version \r
-LSIP200199347 (DFCT) MegaCli online help for -AdpSetProp -DisableLdPS is not very helpful \r
-LSIP200199754 (DFCT) MegaCli -AdpbbuCmd -SetBbuProperties command does not check for valid input file \r
-LSIP200199689 (DFCT) MegaCli online help does not show RAID60 \r
-LSIP200209267 (DFCT) MegaCli does not show correct capacity information for SuperCap \r
-LSIP200199605 (DFCT) SW-Macon : Could not create multiple VDs in same array with DOSCLI \r
-LSIP200199197 (DFCT) MegaCLI online help report duplicate entry for PDInstantSecureErase \r
-LSIP200199860 (DFCT) MegaCli -PDCpyBk online help is not clear which could lead to data lost \r
-LSIP200209465 (DFCT) Porting of MegaSCU64 Linux \r
-LSIP200199316 (DFCT) MegaCLI online help does not show the value for "perfmode" \r
-LSIP200209270 (DFCT) Can not flash FW ( microcode fw for Cacheoffload controller) using MegaCLI 8.02.15 \r
-LSIP200200420 (DFCT) SCU DCLI: DCLI fails to display temparature of SATA drives, however, OS level apps( CLI and MSM) show the same \r
-LSIP200199345 (DFCT) MegaCli online help for "adpsetprop" missing some commands \r
-LSIP200198611 (DFCT) While installing RWC2_linux_64(11.08.02.01),CmdTool install asks for dependencies \r
-LSIP200199125 (DFCT) Macon MegaDCli : MegaDcli application hangs after creating the any VD. \r
-LSIP200199213 (DFCT) MegaCLI help should not have a separate section for array create and controller "get and set" features for PI \r
-LSIP200196784 (DFCT) MegaCli : Unable to create Cachecade VD using Megacli \r
-LSIP200209883 (DFCT) Issue in verifying CC2.0 feature support bit in CLI. \r
-LSIP200209882 (DFCT) Add CtrlId information as part AdpAllInfo command. \r
-LSIP200167604 (DFCT) After unzipping VMWare MegaCLI and executing it reports "Permission Denied" \r
-LSIP200199421 (DFCT) MegaCli Online help need to provide more information for commands with a "filename" input \r
-LSIP200200461 (DFCT) Enhanced Import option fails to be enabled \r
-LSIP200210113 (DFCT) Naming convention for CacheCade (Instead of IR using Defect) \r
-LSIP200186909 (CR) Enable copy back on SMART - TB \r
-LSIP200187637 (CR) Generally available support of selected battery modes for iBBU08. \r
-LSIP200187669 (CR) Update CacheCade product names in all utilities and user manuals \r
-\r
-\r
-Known Restrictions\r
-================\r
-1. NONE\r
-\r
-\r
-Known Bugs\r
-==========\r
-1. NONE\r
-\r
-\r
-Installation Commands: \r
-=======================\r
-\r
-Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
-\r
-\r
-\r
-\r
-\r
-Component:\r
-=========\r
-SAS MegaRAID MegaCLI\r
-Release Date: 08/11/2011\r
-\r
-\r
-Version Numbers: MegaCLI\r
-=============== =========== \r
-Current Version 8.02.16\r
-Previous Version 8.01.06\r
-\r
-\r
-Contents:\r
-=========\r
-This package contains MegaCLI for the following OSes:\r
-DOS\r
-FreeBSD\r
-Linux\r
-Solaris\r
-VMware\r
-Windows\r
-\r
-Use the MegaCLI components from the folder that matches your OS.\r
-\r
-\r
-\r
-Enhancements and Bug Fixes\r
-==========================\r
-LSIP200148740 (CO) (auto4comp UNIV_VIVA_Cli) MegaSCU (DOS4GW) change request to support OEM iBBU calibration process \r
-LSIP200148762 (CO) (auto4comp UNIV_VIVA_Cli) TB FW: Do not let WebBIOS to display "BBU Retention Time" and "Estimated Time To Recharge". \r
-LSIP200184338 (CO) (auto4comp UNIV_VIVA_Cli) TB FW Re-activate the user option to enable Patrol Read on SSD. \r
-LSIP200099745 (CO) (auto4comp UNIV_VIVA_Cli) Enclosure related CLI improvements \r
-LSIP200099746 (CO) (auto4comp UNIV_VIVA_PCLI) Enclosure related CLI improvements \r
-LSIP200099762 (CO) (auto4comp UNIV_VIVA_Cli) PD diag state - Shield State \r
-LSIP200099768 (CO) (auto4comp UNIV_VIVA_Cli) Shield state properties \r
-LSIP200099803 (CO) (auto4comp UNIV_VIVA_Cli) PD status commands under CLI \r
-LSIP200099804 (CO) (auto4comp UNIV_VIVA_PCLI) PD status commands under CLI \r
-LSIP200173292 (CO) (auto4comp UNIV_VIVA_Cli) FW to take PCI IDs & SAS Address out of SBR or TSOC (OEM selectable per value) \r
-LSIP200153885 (CO) (auto4comp UNIV_VIVA_Cli) Update MR SAS LSI applications for VMWare ESXi MN Release \r
-LSIP200099807 (CO) (auto4comp UNIV_VIVA_Cli) additional MR diags \r
-LSIP200099771 (CO) (auto4comp UNIV_VIVA_Cli) CLI battery commands \r
-LSIP200100159 (CO) (auto4comp UNIV_VIVA_Cli) CLI version command \r
-LSIP200154735 (CO) (auto4comp UNIV_VIVA_Cli) FreeBSD x64 support for 6Gb/s (TBolt) MegaRAID line \r
-LSIP200099844 (CO) (auto4comp UNIV_VIVA_Cli) Request to use Unconfigured Good Drives for a HotSpare if no spare defined. \r
-LSIP200099855 (CO) (auto4comp UNIV_VIVA_Cli) Emergency spare may ignore mixing policies \r
-LSIP200099877 (CO) (auto4comp UNIV_VIVA_Cli) DGs revertible HSP attributes sticky on adoption. \r
-LSIP200099896 (CO) (auto4comp UNIV_VIVA_Cli) Suspend / resume background tasks \r
-LSIP200088557 (CO) (auto4comp UNIV_VIVA_Cli) Need ability to RESET expander from behind MegaSAS \r
-LSIP200135217 (CO) (auto4comp UNIV_VIVA_Cli) SW licensing. Support FoD for PF activations on MegaRAID \r
-LSIP200150237 (CO) (auto4comp UNIV_VIVA_Cli) Need MFC bit for CacheCade 2.0 \r
-LSIP200150509 (CO) (auto4comp UNIV_VIVA_Cli) Need MFC bit for CacheCade 2.0 \r
-LSIP200099823 (CO) (auto4comp UNIV_VIVA_Cli) erase vd function \r
-LSIP200135617 (CO) (LSIP200106069) CLI. Add performance monitor related functions to MegaOEM \r
-LSIP200101547 (CO) (auto4comp UNIV_VIVA_Cli) iMR unconfigured disks naming for JBOD disks \r
-LSIP200101549 (CO) (auto4comp UNIV_VIVA_PCLI) iMR unconfigured disks naming for JBOD disks \r
-LSIP200112561 (DFCT) DIF: MegaSCU CMD adpsettings -read -f settings.txt a0 does not work \r
-LSIP200118922 (DFCT) Battery state option not available in CLI \r
-LSIP200121822 (DFCT) CLI version commands are not added in help file. \r
-LSIP200146132 (DFCT) MegaSCU needs to have a PR to set Mfg name & Mfg Date of StingRay ibbu \r
-LSIP200154218 (DFCT) MegaCli vague message displayed when SpinDownTime value is too big \r
-LSIP200168791 (DFCT) This defect is created to check-in files for Defects:LSIP200167601& LSIP200167602 \r
-LSIP200169584 (DFCT) Unable to flash 16mb file using adpM0flash on TB(MR controller) using CMDTOOL \r
-LSIP200171972 (DFCT) Enclosure temperatures are reported 20 deg C higher than actual temperature. \r
-LSIP200060991 (DFCT) DSIII: MegaCLI -adpgetprop defaultldpolicy -a0 return incorrect info \r
-LSIP200141543 (DFCT) DIF cli mixing nonPI and Pi pds found cfgalldreedrv command failed to create R0 Pi VD \r
-LSIP200147521 (DFCT) No syntax for VD erase operation on a VD in MegaCLI 8.02.07 \r
-LSIP200147590 (DFCT) MEGASCU Progdsply/showprog command displays the progress of REBUILD and PDCPYBK event even after suspended. \r
-LSIP200147591 (DFCT) MEGASCU-Patrol read info displays the state as "unknown" when the process is suspended . \r
-LSIP200173919 (DFCT) (Defer LSIP200168402) Patrol read info displays the state as "unknown" when the process is suspended . \r
-LSIP200173920 (DFCT) (Defer LSIP200168399) VD numbering in CLI using command ldpdinfo . \r
-LSIP200148211 (DFCT) Physical Disk information missing in command CFGDSPLY \r
-LSIP200148112 (DFCT) (RW LSIP200141543) DIF cli mixing nonPI and Pi pds found cfgalldreedrv command failed to create R0 Pi VD \r
-LSIP200149139 (DFCT) (RW LSIP200148112) (RW LSIP200141543) DIF cli mixing nonPI and Pi pds found cfgalldreedrv command failed to create R0 Pi \r
-LSIP200147977 (DFCT) add AdpGetPciInfo command options in CLI (help menu, DOS support) \r
-LSIP200148550 (DFCT) (RW LSIP200148211) Physical Disk information missing in command CFGDSPLY \r
-LSIP200147562 (DFCT) 8.00.41 on ESXi and ESX 4.1 gives "Permission Denied" after installing MegaCLI \r
-LSIP200149997 (DFCT) (7040217) (Defer LSIP200148994) MegaCli packages for both SPARC and x86 do not verify architecture type \r
-LSIP200184682 (DFCT) Dos MegaCli doesn't show AdpFWFlash command syntax in the help menu. \r
-LSIP200112950 (DFCT) MegaCli command CfgEachDskRaid0 -enblPI -a1 returns 0x01 error \r
-LSIP200113677 (DFCT) Enclosure serial number is not displaying in CLI and PCLI \r
-LSIP200114042 (DFCT) Enclosure FRU number and part number is not displaying in CLI \r
-LSIP200119731 (DFCT) Enclosure type option is not available in CLI \r
-LSIP200121825 (DFCT) Driver version command is not working in linux CLI \r
-LSIP200166294 (DFCT) Unable to flash 16mb file using adpM0flash on TB(MR controller) \r
-LSIP200174078 (DFCT) MegaCLI crashes during Advance Event Capture command \r
-LSIP200148073 (DFCT) Defect to deliver changes for PR LSIP200072686. \r
-LSIP200148459 (DFCT) CLI should not provide "Default" option in "Adpsetprop defaultldpspolicy" command. \r
-LSIP200148495 (DFCT) (Defer LSIP200147731) DSIII: Failed to Set Adapter Properties when run MegaCli -AdpSetProp -DefaultLdPSPolicy -Default - \r
-LSIP200148545 (DFCT) (RW LSIP200148495) (Defer LSIP200147731) DSIII: Failed to Set Adapter Properties when run MegaCli -AdpSetProp -DefaultLd \r
-LSIP200148300 (DFCT) PR LSIP200072686 requires release of CmdTool2 for MN \r
-LSIP200148511 (DFCT) VMware ESXi5.0 - MegaCLI does not work without export the library paths \r
-LSIP200148515 (DFCT) VMware ESXi 5.0 - CmdTool2 returns Segmentation Fault \r
-LSIP200151201 (DFCT) WB:Data not getting generated while trying to capture information through Megacli with IO running in background. \r
-LSIP200119733 (DFCT) Driver version not shown in CLI using "Megacli version driver" command. \r
-LSIP200113675 (DFCT) CLI version commands are not added in help page. \r
-LSIP200114029 (DFCT) Battery backup charge time is not as per scopping in CLI \r
-LSIP200111844 (DFCT) Remove unsupport DIF CMD in MegaCLI \r
-LSIP200119430 (DFCT) (RW LSIP200113679) MegaCLI "ldinfo" page Mirror data size is shown as reduntant data size \r
-LSIP200119788 (DFCT) Junk character display for SATA WWN field in CLI. \r
-LSIP200114071 (DFCT) Bad Block table information is not shown when execute the cli command with - lall. \r
-LSIP200121864 (DFCT) Enclosure FRU number and part number is not displaying in PCLI \r
-LSIP200123173 (DFCT) Getbbtentries command gives some corrected and uncorrected entries in PCLI eventhough no bad blocks exists \r
-LSIP200124552 (DFCT) MegaSCU: No help file for DIF support feature \r
-LSIP200138571 (DFCT) Defect to port PR-LSIP200100398 : Provide the chip version/revision for MegaRAID controllers thru MegaCLI \r
-LSIP200119187 (DFCT) (7002618) Unable to download disk f/w through MegaCLI \r
-LSIP200147898 (DFCT) SWR: Macon:SCU: Efi cli pdinfo for SATA drives shows junk value for Enquiry data . \r
-LSIP200148634 (DFCT) SWR:Macon:SCU-Cli shows max LD per array as 16. \r
-LSIP200150590 (DFCT) (RW LSIP200148634) SWR:Macon:SCU-Cli shows max LD per array as 16. \r
-LSIP200147485 (DFCT) Macon: In EFI environment CC cannot be started on a VD after performing Fast Init \r
-LSIP200151366 (DFCT) SWR:Macon:CLI versions are different as displayed when queried and in release notes \r
-LSIP200105726 (DFCT) Dummy defect for 11M02 PR \r
-LSIP200105748 (DFCT) Dummy Defect for Removing Comments from files \r
-LSIP200110822 (DFCT) MegaCli PdFWdown missing "-" before EncdevId \r
-LSIP200110789 (DFCT) MegaCli PD FW download to multiple devices not supported, command output needs to be changed \r
-LSIP200099006 (DFCT) For ibbu08, MegaCLI -GetBbuCapacityInfo returns zero for max error, remainging capacity alarm, and remaining time alarm \r
-LSIP200111893 (DFCT) Porting the defect LSIP200099006. \r
-LSIP200111888 (DFCT) Porting the defect LSIP200077064. (PreBootCli - AdpEventLog fails with exit code 0x01.) \r
-LSIP200113872 (DFCT) Diff PR Merging in 11m02 \r
-LSIP200113364 (DFCT) Suspend/Resume fails to work on windows Cli for CC \r
-LSIP200113851 (DFCT) CLI version commands are not working in PCLI \r
-LSIP200114598 (DFCT) PCli fails to work. \r
-LSIP200119427 (DFCT) Cli shows wrong information about Emergency spare \r
-LSIP200119254 (DFCT) FW crashes when execute "adpbbucmd" command in PCLI \r
-LSIP200120059 (DFCT) MegaCli fails to print the operation strings. \r
-LSIP200120725 (DFCT) Battery backup charge time is not as per scopping in CLI \r
-LSIP200114553 (DFCT) In Solaris and SPARC, Un installation time not removing MegaRAID directory. \r
-LSIP200122180 (DFCT) Name change for iBBU08 for TB. \r
-LSIP200152862 (DFCT) Need to CheckIn PR(LSIP200137246) (Univ_Viva_Cli)tools to address latency\r
-LSIP200154233 (DFCT) Battery type need to update \r
-LSIP200156117 (DFCT) MegaCli ShowSummary does not display system info \r
-LSIP200158424 (DFCT) OEM Enclosure PR need to be complete(49251) \r
-LSIP200168903 (DFCT) Progdsply/showprog command displays the progress of rebuild event even after it is suspended. \r
-LSIP200172526 (DFCT) The command showsummary doesnot display system information . \r
-LSIP200147689 (DFCT) Porting of CC2 PR \r
-LSIP200147743 (DFCT) need some extra changes for CC2 \r
-LSIP200148065 (DFCT) Porting Cache-offload PR \r
-LSIP200148087 (DFCT) UNIV_VIVA_Cli crashes when spanned array is created . \r
-LSIP200148138 (DFCT) Unable to capture performance data with Megacli64 \r
-LSIP200148231 (DFCT) Need to update perf mon cmd code \r
-LSIP200148465 (DFCT) CLI does not show if CahceCade 2 is enabled on the controller \r
-LSIP200148688 (DFCT) (RW LSIP200148465) CLI does not show if CahceCade 2 is enabled on the controller \r
-LSIP200144918 (DFCT) Line CacheOffload equals 0 causes Pre-Man to fail\r
-LSIP200148710 (DFCT) AdpHwDevice read command not working properly \r
-LSIP200148711 (DFCT) Porting the Pr-97510 \r
-LSIP200148835 (DFCT) Porting PR-55434 \r
-LSIP200149728 (DFCT) UNIV_VIVA_cli fails to create Virtual Drives using latest cachecade firmware . \r
-LSIP200150311 (DFCT) WB:Megacli crashes while trying to capture information when IO is running in background. \r
-LSIP200150662 (DFCT) Name changeing for Cache cade feature \r
-LSIP200104408 (DFCT) LSIP200049226, LSIP200049215 PD/VD secure erase \r
-LSIP200105750 (DFCT) Dummy defect to check in secure erase changes \r
-LSIP200111056 (DFCT) MegaCLI 8.01.01 enable/disables PI command does not work \r
-LSIP200111338 (DFCT) Megacli Ver 8.01.01-DIF does not show VD properties if PI is enable or disabled \r
-LSIP200111846 (DFCT) MegaCLI should not allow to enable DIF with Liberator controller \r
-LSIP200112378 (DFCT) improvement needed for output of ./MegaCli LdGetProp -dsblpi -l0 -a2 and ldinfo \r
-LSIP200119591 (DFCT) MegaCli fails to work \r
-LSIP200119449 (DFCT) CLI : After aborting VD erase on a VD, veifying prog dsply , shows as Check Consistency on VD not in progress. \r
-LSIP200121826 (DFCT) In CLI help file "UEFI" command is not added in version commands. \r
-LSIP200121841 (DFCT) "Version uefi a0" failed to show UEFI version in EFI host CLI \r
-LSIP200124586 (DFCT) (RW LSIP200121841) "Version uefi a0" failed to show UEFI version in EFI host CLI \r
-LSIP200124588 (DFCT) (RW LSIP200121826) In CLI help file "UEFI" command is not added in version commands. \r
-LSIP200173918 (DFCT) EFI CLI- Driver seperation changes \r
-LSIP200170447 (DFCT) efiHostCli does not work with 2208 products \r
-LSIP200148615 (DFCT) SWR:Macon:DCLI: DCLI does not support 8 drives. \r
-LSIP200148613 (DFCT) SWR:Macon:DCLI:Appropriate error messgae should be displayed for Background operation not supported \r
-LSIP200155836 (DFCT) Megacli ldgetprop consistency lx aN gives invalid output \r
-LSIP200156087 (DFCT) CLI command to enable DPM is not shown in help file but it works. \r
-LSIP200166715 (DFCT) (RW LSIP200159708) CLI does not read entire package version during flashing, causing FW upgrade to report error \r
-LSIP200148921 (DFCT) Forward Porting the changes \r
-LSIP200100106 (DFCT) Assgning the VD numbering issue in Cli after deletion of VDs \r
-LSIP200121545 (DFCT) VD Numbering issue in CLI after deletion of VD. \r
-LSIP200122430 (DFCT) By typing MegaOem commands like v,help.. It shows all MegaSCU commands, and working like MegaSCU \r
-LSIP200123575 (DFCT) (CL LSIP200123543) Fahrenheit values are not shown for SATA and SSD drives in CLI drive temperature field. \r
-LSIP200099360 (DFCT) Porting 10M08 changes to 10M09 and 10M12 \r
-LSIP200100910 (DFCT) FW reports more than 1 enclosures in enclosure list while connect only 1 enclosure with multi path \r
-LSIP200113012 (DFCT) Using MegaCLI to create a RAID1 array under FreeBSD 8.1 result in an error message: No match \r
-LSIP200123317 (DFCT) MegaCli is unable to create VD with power policy settings. \r
-LSIP200105052 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted \r
-LSIP200105743 (DFCT) cfgeachdskraid0 command fails \r
-LSIP200106000 (DFCT) Dummy defect to modify PCLI flash address \r
-LSIP200120037 (DFCT) Mode 0 flash support for TB controllers with 32MB flash \r
-\r
-\r
-\r
-Known Restrictions\r
-================\r
-1. NONE\r
-\r
-\r
-Known Bugs\r
-==========\r
-1. NONE\r
-\r
-\r
-Installation Commands: \r
-=======================\r
-\r
-Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
-\r
-\r
-\r
-\r
-SAS MegaRAID MegaCLI\r
-Release Date: 02/28/2011\r
-\r
-\r
-Version Numbers: MegaCLI\r
-=============== =========== \r
-Current Version 8.01.06\r
-Previous Version 8.00.40\r
-\r
-\r
-Enhancements and Bug Fixes\r
-==========================\r
-Added support for 9265-8i and 9285-8e controllers\r
-LSIP200101547 (CO) iMR unconfigured disks naming for JBOD disks \r
-LSIP200101549 (CO) iMR unconfigured disks naming for JBOD disks \r
-LSIP200072536 (CO) Phy Info (Direct Attached) reporting \r
-LSIP200072543 (CO) Phy Settings (Direct Attached) \r
-LSIP200072524 (CO) Advanced Event Capture \r
-LSIP200089240 (DFCT) We need to Set Permission while executing the CLI in Linux (SLES 11-64bit) \r
-LSIP200084303 (DFCT) Can not flash FW using MegaCLI on 9265 Controller. Works in MSM. \r
-LSIP200095215 (DFCT) Megaware makefile changes \r
-LSIP200099543 (DFCT) Windows Megacli for Vmware unable to detect the Vmware Server Host controller iMR 9285 \r
-LSIP200100106 (DFCT) Assgning the VD numbering issue in Cli after deletion of VDs \r
-LSIP200121545 (DFCT) VD Numbering issue in CLI after deletion of VD. \r
-LSIP200122430 (DFCT) By typing MegaOem commands like v,help., it shows wrong commands\r
-LSIP200123575 (DFCT) (CL LSIP200123543) Fahrenheit values are not shown for SATA and SSD drives in CLI drive temperature field. \r
-LSIP200099360 (DFCT) Porting 10M08 changes to 10M09 and 10M12 \r
-LSIP200100910 (DFCT) FW reports more than 1 enclosures in enclosure list while connect only 1 enclosure with multi path \r
-LSIP200113012 (DFCT) Using MegaCLI to create a RAID1 array under FreeBSD 8.1 result in an error message: No match \r
-LSIP200123317 (DFCT) MegaCli is unable to create VD with power policy settings. \r
-LSIP200085810 (DFCT) MegaCli PdFwDownload output missing a dash \r
-LSIP200089295 (DFCT) -adpsettings command is not expecting "s" on end of "EnableLedHeaders" setting \r
-LSIP200089930 (DFCT) Junk character in the help message for \93encinfo\94 command \r
-LSIP200095273 (DFCT) MegaCLI 8.00.30 crashed during a -adpallinfo command to an iMR controller. \r
-LSIP200110822 (DFCT) MegaCli PdFWdown missing "-" before EncdevId \r
-LSIP200110789 (DFCT) MegaCli PD FW download to multiple devices not supported, command output needs to be changed \r
-LSIP200099006 (DFCT) For ibbu08, MegaCLI -GetBbuCapacityInfo returns zero for max error, remainging capacity alarm, and remaining time alarm \r
-LSIP200111893 (DFCT) Porting the defect LSIP200099006. \r
-LSIP200111888 (DFCT) Porting the defect LSIP200077064. (PreBootCli - AdpEventLog fails with exit code 0x01.) \r
-LSIP200122180 (DFCT) Name change for iBBU08 for 9265 \r
-LSIP200081963 (DFCT) Cannot clear DPM data using the -clear option \r
-LSIP200077322 (DFCT) CLI displays incorrect information when DPM lct command is issue \r
-LSIP200077324 (DFCT) CLI displays data from DPM histogram command incorrectly \r
-LSIP200077326 (DFCT) Latest CLI reports error when issue any AEC command (All AEC commands are not working) \r
-LSIP200083390 (DFCT) Defect to accomodate API changes in MegaWare1.2 boxcar \r
-LSIP200085172 (DFCT) MegaCLI output for DPM ext command does not align correctly \r
-LSIP200094822 (DFCT) Porting defect fixes from 10M09 to 10M12 \r
-LSIP200097425 (DFCT) DIF syntax errors AdpSetprop -preventPiImport \r
-LSIP200105052 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted \r
-LSIP200105743 (DFCT) cfgeachdskraid0 command fails \r
-LSIP200106000 (DFCT) Dummy defect to modify PCLI flash address \r
-LSIP200120037 (DFCT) Mode 0 flash support for TB controllers with 32MB flash \r
-LSIP200083430 (DFCT) Implementation of MegaWare 1.1 in MegaPCLI \r
-LSIP200084039 (DFCT) MegaWare support code changes \r
-LSIP200075421 (DFCT) SWR: MegaDcli takes too much to execute command \r
-LSIP200087724 (DFCT) Intermittent issue seen while Clearing Configuraton through MegaCLI in RHEL 6 B2 64bit \r
-LSIP200097535 (DFCT) Dummy defect to update version of DCLI \r
-LSIP200097793 (DFCT) EFI Cli is displaying "Created VD0" even for 2nd VD \r
-LSIP200097811 (DFCT) To check in EFI CLI binary \r
-LSIP200089369 (DFCT) (#33990.1) Incorrect Display View Mirror Infos for all VD's in Windows CLI \r
-LSIP200096227 (DFCT) By pressing Ctrl-Y(PCLI) in POST message, its going to megamon in fw and also not getting pcli command promot . \r
-LSIP200096792 (DFCT) CLI crashes when using "\96snapshot \96info" command on the repository VD \r
-LSIP200097032 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted \r
-\r
-\r
-\r
-\r
-\r
-\r
-\r
-Release Date: 12/10/2010\r
-\r
-\r
-Version Numbers: MegaCLI\r
-=============== =========== \r
-Current Version 8.00.40\r
-Previous Version 8.00.29\r
-\r
-\r
-Enhancements and Bug Fixes\r
-==========================\r
-LSIP200097574 (DFCT) MegaCliKL is not able to access the Host Machine \r
-LSIP200063469 (CO) Check internal backplane SES page for Backplane Bay ID and display in mgmt tools \r
-LSIP200063410/LSIP200063415 (CO) Break R1 Mirror \r
-LSIP200063457 (CO) Support for variable rate HDDs \r
-LSIP200075203 (CO) RAID Firmware to read controller thermal sensors to get chip and board temps \r
-LSIP200070634 (CO) Customer requested these EFI:CLI commands are required for their testing \r
-LSIP200073881 (CO) Provide PCI bus and device id for a selected controller thru MegaCLI \r
-LSIP200072376 (CO) SWRAID. Develop CLI for uEFI 2.2 \r
-LSIP200083287 (CO) SW licensing. Verbiage changes in MegaRAID management tools \r
-LSIP200076197 (DFCT) \93No more interfaces\94 on executing most of the CLI command \r
-LSIP200075420 (DFCT) SWR: MegaDCli does not detect the PDs \r
-LSIP200076437 (DFCT) SWR5: Unable to create Raid 5 thru DCLI \r
-LSIP200087722 (DFCT) DCLI -After creating R5, we can\92t delete the VD or clear the config. \r
-LSIP200084490 (DFCT) Porting 10M08 chnages to 10M09 \r
-LSIP200085665 (DFCT) "MegaCli pdfwdownload" command is not flashing PD Firmware for Multiple PD's at a time. \r
-LSIP200087720 (DFCT) DCLI - Version Info showing wrong Date. \r
-LSIP200085497 (DFCT) SWR5: Cannot create config and clear config using EFI CLI \r
-LSIP200087729 (DFCT) DCLI/EFI CLI - "pdfwdownload" command is not exists in the help file of DCLI and EFI CLI. \r
-LSIP200075421 (DFCT) SWR: MegaDcli takes too much to execute command \r
-LSIP200087724 (DFCT) Intermittent issue seen while Clearing Configuraton through MegaCLI in RHEL 6 B2 64bit \r
-LSIP200097793 (DFCT) EFI Cli is displaying "Created VD0" even for 2nd VD \r
-LSIP200082937 (DFCT) Defect to merge DSW-3 code \r
-LSIP200084314 (DFCT) AutoDeleteOldestSnapshot doesn\92t work in the CLI \r
-LSIP200018606/LSIP200018607 (DFCT) "./MegaCli64 adpeventlog getlatest n ax" fails when ldbi is running on the controllers \r
-LSIP200087587 (DFCT) Defect to accomodate for non-availablity of DSW-3 feature on iMR controllers \r
-LSIP200089369 (DFCT) (#33990.1) Incorrect Display View Mirror Infos for all VD's in Windows CLI \r
-LSIP200096227 (DFCT) By pressing Ctrl-Y(PCLI) in POST message, its going to megamon in fw and also not getting pcli command promot . \r
-LSIP200096792 (DFCT) CLI crashes when using "\96snapshot \96info" command on the repository VD \r
-LSIP200097032 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted \r
-LSIP200085810 (DFCT) MegaCli PdFwDownload output missing a dash \r
-LSIP200089295 (DFCT) -adpsettings command is not expecting "s" on end of "EnableLedHeaders" setting \r
-LSIP200089930 (DFCT) Junk character in the help message for \93encinfo\94 command \r
-LSIP200095273 (DFCT) MegaCLI 8.00.30 crashed during a -adpallinfo command to a iMR controller. \r
-LSIP200076406 (DFCT) CLI displays 'Stripe' size instead of displaying 'Strip' size in adpallinfo info page \r
-LSIP200082223 (DFCT) "MegaCli -AdpAliLog a0" command showing wrong Adapter values in the adapterinfo field. \r
-LSIP200018511 (DFCT) Linux "MegaCli adpalilog a0" displays garbage, also missing key data comparing to Windows output. \r
-LSIP200082785 (DFCT) Support of AdpGetPciInfo command for recent stream \r
-LSIP200083564 (DFCT) Megacli-8.00.28 : Megacli does not give any progress value for initialization on LD with progdsply \r
-LSIP200086230 (DFCT) Different TimeStamps values in MegaCLI Ctrl Eventlog \r
-LSIP200075258 (DFCT) Create separate binary to configure VMware ESXi through MegaCLI. \r
-LSIP200082000 (DFCT) Help file needs to be updated for MegaCliKL. \r
-LSIP200082431 (DFCT) PFK - MFT_STAT Support \r
-LSIP200077081 (DFCT) Information For Command Parameters is missing in HELP file for the ADPBBUCMD command \r
-LSIP200073835 (DFCT) MegaCLI Enclosure Inquiry returns irrelevant in Vendor Specific Information field \r
-LSIP200076725 (DFCT) Spelling mistake in one of the output of CLI command \r
-\r
--- /dev/null
+*********************************************\r
+\r
+LSI Corp. MegaRAID MegaCLI Release \r
+\r
+*********************************************\r
+\r
+Release Date: 01/20/14\r
+========================\r
+\r
+Supported Controllers\r
+==================\r
+\r
+MegaRAID SAS 9270-8i \r
+MegaRAID SAS 9271-4i \r
+MegaRAID SAS 9271-8i \r
+MegaRAID SAS 9271-8iCC \r
+MegaRAID SAS 9286-8e \r
+MegaRAID SAS 9286CV-8e \r
+MegaRAID SAS 9286CV-8eCC\r
+MegaRAID SAS 9265-8i\r
+MegaRAID SAS 9285-8e\r
+MegaRAID SAS 9240-4i\r
+MegaRAID SAS 9240-8i\r
+MegaRAID SAS 9260-4i\r
+MegaRAID SAS 9260CV-4i\r
+MegaRAID SAS 9260-8i\r
+MegaRAID SAS 9260CV-8i\r
+MegaRAID SAS 9260DE-8i\r
+MegaRAID SAS 9261-8i\r
+MegaRAID SAS 9280-4i4e\r
+MegaRAID SAS 9280-8e\r
+MegaRAID SAS 9280DE-8e\r
+MegaRAID SAS 9280-24i4e\r
+MegaRAID SAS 9280-16i4e\r
+MegaRAID SAS 9260-16i\r
+MegaRAID SAS 9266-4i\r
+MegaRAID SAS 9266-8i\r
+MegaRAID SAS 9285CV-8e\r
+MegaRAID SAS 8704ELP\r
+MegaRAID SAS 8704EM2\r
+MegaRAID SAS 8708ELP\r
+MegaRAID SAS 8708EM2 \r
+MegaRAID SAS 8880EM2\r
+MegaRAID SAS 8888ELP\r
+MegaRAID SAS 8308ELP*\r
+MegaRAID SAS 8344ELP*\r
+MegaRAID SAS 84016E*\r
+MegaRAID SAS 8408E*\r
+MegaRAID SAS 8480E*\r
+MegaRAID SATA 300-8ELP*\r
+\r
+*These older controllers should work but have not been tested.\r
+\r
+\r
+Component:\r
+=========\r
+SAS MegaRAID MegaCLI\r
+Release Date: 01/20/14\r
+\r
+\r
+Version Numbers: MegaCLI\r
+=============== =========== \r
+Current Version 8.07.14\r
+Previous Version 8.07.07\r
+\r
+\r
+Contents:\r
+=========\r
+This package contains MegaCLI for the following OSes:\r
+DOS\r
+FreeBSD\r
+Linux\r
+Solaris\r
+Windows\r
+\r
+Use the MegaCLI components from the folder that matches your OS.\r
+\r
+\r
+Enhancements and Bug Fixes\r
+==========================\r
+SCGCQ00393585 (DFCT) - VD creation from MegaCli fails on Solaris Sparc 10u9 operating system.\r
+SCGCQ00413883 (DFCT) - "megacli -version -pd -a0" Segmentation Faults if PDs are missing\r
+SCGCQ00445356 (CSET) - Megacli crashes after invoking any command in SGI system with one 9280-8e and 2 quad port qlogic FC cards.\r
+SCGCQ00452383 (CSET) - New version MegaCli did not show iBBU06 over temperature as old when temperature is high\r
+SCGCQ00454980 (CSET) - storcli /c0 show is not listinf SWR controller\r
+SCGCQ00459022 (DFCT) - System crashes when tried to issue command exceeding around 90- 100 characters in EFI Environment.\r
+SCGCQ00470761 (DFCT) - Megacli wrongly reports PCI bus number for 2208 based controllers.\r
+SCGCQ00471745 (DFCT) - Same NVRAM log event IDs with different messages\r
+SCGCQ00475159 (DFCT) - While printing the ldinfo, there are some tabs instead of spaces for indentation so replaced all tabs with spaces.\r
+SCGCQ00531245 (ENHREQ) - Display the NCQ enabled/disabled status of every SATA disk drive in output of StorCLI and MegaCLI\r
+SCGCQ00552754 (ENHREQ) - RAID CLI to display the Patrol Read Start Time\r
+SCGCQ00564123 (ENHREQ) - LIBMODS : Request RAID CLI to display the Patrol Read Start Time\r
+SCGCQ00521386 (DFCT) - Megacli : ADRA is still mentioned in help file, eventhough it is not supported\r
+SCGCQ00572235 (DFCT) - No description for "setdelay" with help file of adppr.\r
+SCGCQ00572270 (DFCT) - adpallinfo is not showing information regarding "NCQ"\r
+SCGCQ00573053 (DFCT) - ncq settings for sata pd is showing disabled\r
+SCGCQ00573091 (DFCT) - NCQ setting for SATA pd is showing disabled with TB fW.\r
+SCGCQ00576028 (DFCT) - No description for "setdelay" with help file of adppr.\r
+\r
+\r
+Installation Commands: \r
+=======================\r
+Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
+\r
+\r
+\r
+=====================================\r
+=====================================\r
+Previous Releases:\r
+=====================================\r
+=====================================\r
+\r
+\r
+Component:\r
+=========\r
+SAS MegaRAID MegaCLI\r
+Release Date: 03/02/13\r
+\r
+\r
+Version Numbers: MegaCLI\r
+=============== =========== \r
+Current Version 8.07.07\r
+Previous Version 8.07.06\r
+\r
+\r
+Contents:\r
+=========\r
+This package contains MegaCLI for the following OSes:\r
+DOS (version 8.07.06)\r
+FreeBSD\r
+Linux\r
+Solaris\r
+VMware\r
+VMwareMN\r
+Windows\r
+EFI (version 8.07.06)\r
+\r
+Use the MegaCLI components from the folder that matches your OS.\r
+\r
+\r
+Enhancements and Bug Fixes\r
+==========================\r
+\r
+SCGCQ00332212 (DFCT) - libsysfs custom implementation issue.\r
+SCGCQ00345839 (DFCT) - While the BBU is fully charged, megacli adpbbucmd reports that it is both discharging and not discharging\r
+SCGCQ00355536 (DFCT) - MegaCli and StorCli can not manage both controllers of different types n the same system under FreeBSD\r
+SCGCQ00362808 (DFCT) - MegaCli 32 Crashes in Windows in specific system\r
+SCGCQ00364411 (DFCT) - Segmentation Fault while running discard preserved cache in megacli\r
+\r
+\r
+Installation Commands: \r
+=======================\r
+Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+Component:\r
+=========\r
+SAS MegaRAID MegaCLI\r
+Release Date: 12/28/12\r
+\r
+\r
+Version Numbers: MegaCLI\r
+=============== =========== \r
+Current Version 8.07.06\r
+Previous Version 8.05.06\r
+\r
+\r
+Contents:\r
+=========\r
+This package contains MegaCLI for the following OSes:\r
+DOS\r
+FreeBSD\r
+Linux\r
+Solaris\r
+VMware\r
+Windows\r
+EFI\r
+\r
+Use the MegaCLI components from the folder that matches your OS.\r
+\r
+\r
+Enhancements and Bug Fixes\r
+==========================\r
+\r
+SCGCQ00289583 Defect CLI CfgLDAdd reports invalid token when -Force and -enblPI are used together\r
+SCGCQ00289585 Defect Command line generated along with press any key in help file operation\r
+SCGCQ00315805 Defect Change the UI fro "adpBBucmd getbbumodes a0" command\r
+SCGCQ00317547 Defect MegaCLI misspell the word "transparent" in bbu mode display\r
+SCGCQ00318648 Defect VD creation on regular drives fails for older firmware where 4K sector is not supported\r
+SCGCQ00319423 Defect FreeBSD MegaCLI v8.05.02 does not detect controller when driver 5.504.05.00 is loaded\r
+SCGCQ00324031 Defect MegaCLI 8.04.07 output typos\r
+SCGCQ00324525 Defect MegaCLI: MFI_STAT_NOT_FOUND returns when retrieving the FW event log.\r
+SCGCQ00325890 Defect CLI/Segmentation fault while running pdlist and cfgdsply in CentOS\r
+SCGCQ00326673 Defect 5.5 CLI Version 8.07.00/Unable to flash the controller's FW using CLI\r
+SCGCQ00327929 Defect Command to enable Patrol Read on SSDs controller property is not shown in Help\r
+SCGCQ00331576 Defect LSI MegaCLI EncInfo (Enclosure Info) duplicates the first power supply status data to both power supplies\r
+SCGCQ00333070 Defect make files updates\r
+SCGCQ00333590 Defect MegaCLI 8.04.07 output typos\r
+SCGCQ00336434 Defect MegaCli reports wrong properties for VD.\r
+SCGCQ00337213 Defect FW reports exit code 0x3d (Unsupported HWR) when getting bbu capacity info for Supercap\r
+SCGCQ00337810 Defect 37 drives shown as unconfigured good in MegaCLI when "enable JBOD=0"\r
+SCGCQ00339405 Defect MegaCLI does not display correct adpBIOS mode using "adpBIOS dsply" command\r
+SCGCQ00341724 Defect FW allows a firmware to be flashed through Online FW Update method in DOS and then breaks into montask\r
+SCGCQ00342848 Defect Add Adapter restart support in CLI\r
+SCGCQ00342993 Defect Add Adapter restart support in CLI\r
+SCGCQ00343308 Defect MegaCLI online help display for "adpBIOS" is not align correctly\r
+SCGCQ00343310 Defect MegaCLI "adpBIOS dsply" command does not display correct information when set to BE or SOE\r
+SCGCQ00344574 Defect MegaCLI does not prompt user to reboot after update firmware\r
+SCGCQ00352210 Defect MegaCli pdFwDownload fails on a SATA drive with an interposer\r
+SCGCQ00353584 Defect CLI has to refresh the MR_CTRL_INFO after the MR_DCMD_CTRL_FLASH_FW_DOWNLOAD for OFU.\r
+SCGCQ00356037 Defect CLI Crashes When Running ADP FW Flash Command\r
+SCGCQ00356190 Defect No controller properties for Online FW Update in MegaCLi\r
+SCGCQ00318641 EnhancementRequest True Online Firmware Update\r
+SCGCQ00322216 EnhancementRequest Help files for Perfmode in adp(set/get)prop are added.\r
+SCGCQ00322234 EnhancementRequest Utilities to show logical block size [AF512e, 512n, 4Kn,..]\r
+SCGCQ00322257 EnhancementRequest Implemented support for 4K sector drives in CLI.\r
+SCGCQ00322317 EnhancementRequest 4k sector support in LIBMODS\r
+SCGCQ00334377 EnhancementRequest Resurrect ARA option in CLI\r
+SCGCQ00338696 EnhancementRequest powershell support for MegaCli\r
+\r
+\r
+Installation Commands: \r
+=======================\r
+Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
+\r
+\r
+\r
+\r
+Component:\r
+=========\r
+SAS MegaRAID MegaCLI\r
+Release Date: 10/08/12\r
+\r
+\r
+Version Numbers: MegaCLI\r
+=============== =========== \r
+Current Version 8.05.06\r
+Previous Version 8.04.07\r
+\r
+\r
+Contents:\r
+=========\r
+This package contains MegaCLI for the following OSes:\r
+DOS\r
+FreeBSD\r
+Linux\r
+Solaris\r
+VMware\r
+Windows\r
+EFI\r
+\r
+Use the MegaCLI components from the folder that matches your OS.\r
+\r
+\r
+Enhancements and Bug Fixes\r
+==========================\r
+LSIP200233163 (DFCT) improve the manner and customer experience of transitioning from MR mode to iMR \r
+LSIP200233100 (DFCT) MR5.4 MegaCli - does not recognize the adapter \r
+LSIP200233107 (DFCT) Error message displayed while creating VD in SLESS 11 SP2 \r
+LSIP200245985 (DFCT) Load address change for PCLI \r
+LSIP200233342 (DFCT) Error message displayed while deleting all ld's in MegaCLI, SLESS11 sp2 \r
+LSIP200232922 (DFCT) MegaCLI misspell the word "package" as "pakage" under ctrl version and it does not displays firmware version \r
+LSIP200232921 (DFCT) MegaCLI displays version for PD in unclear format and the data is not aligned correctly \r
+LSIP200232954 (DFCT) Need to Support all the MFC default values in the command AdpSettings. \r
+LSIP200245968 (DFCT) In EFICLI not able to flash latest firmware to controller without using -nosigchk -noverchk option. \r
+LSIP200233079 (DFCT) Redesign battery changes \r
+LSIP200232955 (DFCT) Porting CLI MR5.3 defect (LSIP200232645) \r
+LSIP200233047 (DFCT) Throwing exception while erasing VD with user given patterns \r
+LSIP200245889 (DFCT) Battery Changes \r
+LSIP200232929 (DFCT) LSIP200211349 (PR NO)- MegaCLI for uEFI \r
+LSIP200233314 (DFCT) Pcilinkspeedset and adpdowngrade cmds are not working and Need to update Help page \r
+LSIP200232870 (DFCT) Add a Gen2 to Gen3 toggle function and a check for the PCI speed to MegaSCU/CLI [ PR : LSIP200231423 ] \r
+LSIP200232927 (DFCT) Port PR 198414 to MR5.4 (Headless Boot) to TB [ PR: LSIP200229508] \r
+LSIP200232044 (DFCT) MegaCli causes "unexpected sense" and "illegal request" on HDDs \r
+LSIP200233041 (DFCT) MegaCli -ShowSummary display incorrect LD info \r
+LSIP200232675 (DFCT) (RP LSIP200232646) "Disk Cache Policy" default setting is set to "Unchanged" needs to be set to "Disabled" \r
+LSIP200232713 (DFCT) CLI is displaying the message to Use Force option when using cfglddel to try to delete a CC VD. \r
+LSIP200232645 (DFCT) Cannot clear a CC Drive Group using MegaCli64.exe in Windows \r
+LSIP200246111 (DFCT) Megacli tool stops working while executing adpeventlog commands. \r
+LSIP200246081 (DFCT) Any junk character after the help command executes with an incomplete output and exits with no error. \r
+LSIP200246117 (DFCT) Output correction required for BBU status. \r
+LSIP200246078 (DFCT) Enclosure information not displayed.\r
+SCGCQ00317021 (DFCT) MegaCLI ldinfo does not display correct information under FreeBSD\r
+SCGCQ00317547 (DFCT) MegaCLI misspell the word "transparent" in bbu mode display\r
+SCGCQ00319423 (DFCT) FreeBSD MegaCLI v8.05.02 does not detect controller when driver 5.504.05.00 is loaded\r
+\r
+\r
+Installation Commands: \r
+=======================\r
+Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
+\r
+\r
+\r
+\r
+\r
+Component:\r
+=========\r
+SAS MegaRAID MegaCLI\r
+Release Date: 06/18/12\r
+\r
+\r
+Version Numbers: MegaCLI\r
+=============== =========== \r
+Current Version 8.04.07\r
+Previous Version 8.02.21\r
+\r
+\r
+Contents:\r
+=========\r
+This package contains MegaCLI for the following OSes:\r
+DOS\r
+FreeBSD\r
+Linux\r
+Solaris\r
+VMware\r
+Windows\r
+\r
+Use the MegaCLI components from the folder that matches your OS.\r
+\r
+\r
+Enhancements and Bug Fixes\r
+==========================\r
+LSIP200223580 (CO) EfiHostCli.efi should be able to save raid configuration to a file, similar to MegaCli \r
+LSIP200210362 (CO) Update CacheCade product names in all utilities and user manuals \r
+LSIP200212698 (CO) MR: MegaCLI should warn user that they should reboot immediately after flashing \r
+LSIP200212693 (CO) Real Time Scheduler for Relearn \r
+LSIP200199668 (CO) End to End Data Protection (EEDP) \r
+LSIP200210405 (CO) Enable copy back on SMART - TB \r
+LSIP200209945 (CO) Generally available support of selected battery modes for iBBU08. \r
+LSIP200230177 (DFCT) battery operational status is not proper \r
+LSIP200231521 (DFCT) forward porting of defect id:LSIP200230223 and LSIP200230629 \r
+LSIP200232675 (DFCT) (RP LSIP200232646) "Disk Cache Policy" default setting is set to "Unchanged" needs to be set to "Disabled" \r
+LSIP200223837 (DFCT) Time/Date stamp does not match with the respective CDB's displayed in Drive Performance Monitor(DPM) command. \r
+LSIP200230994 (DFCT) (Defer LSIP200230558) CLI/Emergency hotspare status is being displayed for UG drives when UG for Emergency is disabled \r
+LSIP200231392 (DFCT) FW broke at MonTask: line 278 in file ../../raid/1078int.c while running EFI CLI "adpallinfo -a0 page" \r
+LSIP200232089 (DFCT) Uefi cli help does not show commad adpget/set patrolread rate in help file which is supported on SWR controller. \r
+LSIP200232282 (DFCT) 512E drive Support Changes is ported from MR 5.2 to MR 5.3 \r
+LSIP200232497 (DFCT) Discard Cache command should remove the blocked access on an Virtual Drive \r
+LSIP200232713 (DFCT) CLI is displaying the message to Use Force option when using cfglddel to try to delete a CC VD. \r
+LSIP200232645 (DFCT) Cannot clear a CC Drive Group using MegaCli64.exe in Windows \r
+LSIP200230035 (DFCT) move MegaCli changes for CCoH to 5.3 stream \r
+LSIP200229563 (DFCT) The Exit code displayed for the command \93MegaCli64 ccoh adcdev \94 is not correct. \r
+LSIP200231249 (DFCT) Resolve MegaCli compilation issues \r
+LSIP200229476 (DFCT) Rename all external references to CCoH to new marketing name \r
+LSIP200230456 (DFCT) Handle review comments for MegaCli merged code \r
+LSIP200231215 (DFCT) RHel5.7: trying to add vd having lvm configuration to cachegroup throws internal error \r
+LSIP200231532 (DFCT) Display dev busy while adding vd when storelib returns busy and fix MegaOEM compilation issue \r
+LSIP200231655 (DFCT) Sprint5-Build14- Name of the Cache Group has to be changed \r
+LSIP200231658 (DFCT) Remove CCoH referemnce in warpdriveinfo command (CCoH License) \r
+LSIP200231805 (DFCT) check in latest linux storelib library build to MegaCli \r
+LSIP200231838 (DFCT) check in ccoh readme file to MegaCli \r
+LSIP200232318 (DFCT) Update the SLIR2 point release 5 binary in MegaCLI stream \r
+LSIP200232229 (DFCT) In the Linux MegaCLI readme file mention that lib_Utils2-1.xxx.rpm but I don\92t find this file along with megaCLI. \r
+LSIP200230107 (DFCT) AdpHWdevice command is unsupported in DOS MegaOEM \r
+LSIP200231053 (DFCT) MegaCLI help for "perfmon" command contains mispell word "minuts" \r
+LSIP200230224 (DFCT) PDlist command is removing in between lines while printing \r
+LSIP200230506 (DFCT) ProgDsply option is not working in VMWare MegaCli \r
+LSIP200210421 (DFCT) Cannot flash the 16MB FW file in Dos based Megacli \r
+LSIP200212540 (DFCT) (RW LSIP200187758) Installation of MegaSCU failed dependencies error-RH6x64bit OS \r
+LSIP200223206 (DFCT) Porting from 11M08 to MR 5.2 \r
+LSIP200224089 (DFCT) AdpNvram clear command is not working for IMR controller \r
+LSIP200223716 (DFCT) (RW LSIP200222444) CLI getbbumodes returns Failed \r
+LSIP200223718 (DFCT) (RW LSIP200222444) CLI getbbumodes returns Failed \r
+LSIP200224510 (DFCT) MegaCLI online help need to format with only 80 characters per line \r
+LSIP200231426 (DFCT) MegaSCU AdpSettings can't program controller with an init file \r
+LSIP200224890 (DFCT) MegaCLI64-bit does not detect TB controller on RHEL 6.1 64-bit [ issue fixed in 11M08 porting to MR 5.2 ] \r
+LSIP200222839 (DFCT) MegaCli BBUStatus cmd shows inconsistent values for different BBU types \r
+LSIP200209267 (DFCT) MegaCli does not show correct capacity information for SuperCap \r
+LSIP200210113 (DFCT) Naming convention for CacheCade (Instead of IR using Defect) \r
+LSIP200210861 (DFCT) This defect for forward porting and backward porting of PR-LSIP200187637\r
+LSIP200210741 (DFCT) help file not updated with method to set the bbumode \r
+LSIP200210670 (DFCT) CLI sees characters "\n" in adpbbucmd command before Transparent Learn string for supercap \r
+LSIP200098881 (DFCT) (RW LSIP200086230) Different TimeStamps values in MegaCLI Ctrl Eventlog \r
+LSIP200212405 (DFCT) Online help for MegaCLI displays "PreventPIImport" as "PeventPIImport" \r
+LSIP200223256 (DFCT) Due to PR:LSIP200122939 scoping has been changed, need to take off the old chagnes. \r
+LSIP200223574 (DFCT) Cannot set BBU modes using "adpbbucmd SetBbuProperties" command \r
+LSIP200224091 (DFCT) PR:LSIP200122939:Real Time Scheduler for Relearn : Scoping has been changed, changing the code accordingly. \r
+LSIP200224227 (DFCT) CLI setting some other day of the week instead of particular Day \r
+LSIP200224179 (DFCT) Memory violation for day value(DDD) is diffrent from days of week. \r
+LSIP200224241 (DFCT) Show battery capacity info (runTimeToEmpty,averageTimeToEmpty and averageTimeToFull) in human read able form. \r
+LSIP200224119 (DFCT) Need to block Set BBU properties command for TMMC battery type with transparent Learn. \r
+LSIP200224394 (DFCT) CLI not showing 'none' for 'next learn time' when 'auto learn mode' is 'Warn via Event' or 'Disabled' in bbu proeprties \r
+LSIP200224697 (DFCT) When fire "AdpBBucmd schedulelearn DSbl a0" command then showing improper message "Controller not supported" \r
+LSIP200224836 (DFCT) Installation Linux VMWare : missing libraries \r
+LSIP200224515 (DFCT) MegaCLI displays schedule time in a strange format \r
+LSIP200225004 (DFCT) In CLI For DST zone "adpbbucmd schedulelearn setstarttime mon 7 a0" command setting it on 5 AM not 7 AM \r
+LSIP200224937 (DFCT) ADRA(Adaptive Read Aead) is stil supported in CLI that not supported in FW. Remove it from all supported commands. \r
+LSIP200229523 (DFCT) (RW LSIP200224515) MegaCLI displays schedule time in a strange format \r
+LSIP200229697 (DFCT) CLI setting DiskCachePolicy as unchanged instead of Disabled for OEM. \r
+LSIP200212808 (DFCT) Porting of defect changes done in 11M02 to PERC 8.1 \r
+LSIP200211426 (DFCT) Using Megacli able to create a VD with MAX Powersave policy when disablePowerSavings set to 14 \r
+LSIP200212401 (DFCT) Execute MegaCli64 in FreeBSD 8.2x64bit got Permission denied \r
+LSIP200212887 (DFCT) Creating VD using MegaCli/MegaCli64 in FreeBSD return "No match" error \r
+LSIP200221351 (DFCT) Defect to check-in the file changes done for building a vib package of VMware_MN \r
+LSIP200076838 (DFCT) "Invalid Key:CHTIMER\94 While we were changed only BGI, Stripsize. Flush time. \r
+LSIP200223800 (DFCT) Change the word "Spun" to "Spin" to correct grammar for default response text \r
+LSIP200223832 (DFCT) MWCLI: Syntax to Set property for needs to be changed AutoSnapshotSpace. \r
+LSIP200223830 (DFCT) MWCLI: Syntax to Set property for needs to be changed DefaultSnapshotSpace. \r
+LSIP200224773 (DFCT) MegaCLI:BBU Information is not alligned properly \r
+LSIP200224837 (DFCT) Windows_VMWare_KL: Driver version not available \r
+LSIP200211840 (DFCT) Portings from 11M08 \r
+LSIP200211838 (DFCT) New PCLI with new load addresss for 1_TB support \r
+LSIP200212583 (DFCT) 11M08 portings \r
+LSIP200222609 (DFCT) adpbbucmd getbbumodes does not displays any information as indicated on the help \r
+LSIP200230220 (DFCT) FreeBSD MegaCli no 64bit available - both are 32 bit \r
+LSIP200221349 (DFCT) CfgAllFreeDrv command detailed online help is not updated properly \r
+LSIP200221568 (DFCT) MegaCLI help for adpbbucmd contains multiple misspell words \r
+LSIP200196784 (DFCT) MegaCli : Unable to create Cachecade VD using Megacli \r
+LSIP200209883 (DFCT) Issue in verifying CC2.0 feature support bit in CLI. \r
+LSIP200209882 (DFCT) Add CtrlId information as part AdpAllInfo command. \r
+LSIP200070255 (DFCT) (RW LSIP200055580) MegaCli 80015 for Sparc missing OS version number \r
+LSIP200199421 (DFCT) MegaCli Online help need to provide more information for commands with a "filename" input \r
+LSIP200167604 (DFCT) After unzipping VMWare MegaCLI and executing it reports "Permission Denied" \r
+LSIP200199125 (DFCT) Macon MegaDCli : MegaDcli application hangs after creating the any VD. \r
+LSIP200199605 (DFCT) SW-Macon : Could not create multiple VDs in same array with DOSCLI \r
+LSIP200200420 (DFCT) SCU DCLI: DCLI fails to display temparature of SATA drives, however, OS level apps( CLI and MSM) show the same \r
+LSIP200200257 (DFCT) Not able to set the link speed to 6GB/s as per the information given in the help using MegaCli. \r
+LSIP200209972 (DFCT) M0flashing is not working with Dos based Megascu \r
+LSIP200200461 (DFCT) Enhanced Import option fails to be enabled \r
+\r
+\r
+Installation Commands: \r
+=======================\r
+Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
+\r
+\r
+\r
+\r
+Component:\r
+=========\r
+SAS MegaRAID MegaCLI\r
+Release Date: 03/30/12\r
+\r
+\r
+Version Numbers: MegaCLI\r
+=============== =========== \r
+Current Version 8.02.21\r
+Previous Version 8.02.16\r
+\r
+\r
+Contents:\r
+=========\r
+This package contains MegaCLI for the following OSes:\r
+DOS\r
+FreeBSD\r
+Linux\r
+Solaris\r
+VMware\r
+Windows\r
+\r
+Use the MegaCLI components from the folder that matches your OS.\r
+\r
+\r
+Enhancements and Bug Fixes\r
+==========================\r
+LSIP200149500 (DFCT) Macon:SCU:System hangs during DCLI/ESRT2 commanad execution when both the controllers(AHCI and SCU) are enabled in bios. \r
+LSIP200185414 (DFCT) MegaCLI does not return any value for Driver version. \r
+LSIP200151500 (DFCT) MegaCli packages for both SPARC and x86 do not verify architecture ty \r
+LSIP200185426 (DFCT) Enclosure info gives segmentation fault in cli \r
+LSIP200149492 (DFCT) Help for Drive Performance Monitoring commands is not available. \r
+LSIP200186064 (DFCT) There is no return message in EFI if you try to create more than 8 VD \r
+LSIP200151323 (DFCT) Remaining Capacity Alarm is set to Yes for iBBU08 as displayed by MegaCli but it should not. \r
+LSIP200149845 (DFCT) "Inquiry Data" info differs from SPARC with SSDs attached \r
+LSIP200186189 (DFCT) Need the ability to deselect through MegaCLI bootable drives from boot list \r
+LSIP200184706 (DFCT) When checking rebuild state of PD using progdsply in EFI, screen keeps on running though esc key pressed \r
+LSIP200185859 (DFCT) CLI BBU design information does not show correct values with supercap present. \r
+LSIP200148605 (CR) Ability to get settings for delaySOD paramaters using MegaOEM or MegaCLI \r
+LSIP200151127 (CR) Add Ubuntu support to MegaCLI \r
+LSIP200082222 (CR) MR port to Invader \r
+LSIP200082262 (CR) 12 Gb/s functionality \r
+LSIP200083522 (CR) Need the ability to deselect through MegaCLI bootable drives from boot list \r
+LSIP200188010 (DFCT) Various commands failed on MegaCLI 8.02.18 when running BST - See below \r
+LSIP200196726 (DFCT) In AdpBbuCmd -SetBbuProperties command AutoLearnMode can set even transparentLearns field is non zero \r
+LSIP200166747 (CR) Add SGPIO for Medusa \r
+LSIP200185421 (CR) Request to include Megascu read of BMU version \r
+LSIP200199347 (DFCT) MegaCli online help for -AdpSetProp -DisableLdPS is not very helpful \r
+LSIP200199754 (DFCT) MegaCli -AdpbbuCmd -SetBbuProperties command does not check for valid input file \r
+LSIP200199689 (DFCT) MegaCli online help does not show RAID60 \r
+LSIP200209267 (DFCT) MegaCli does not show correct capacity information for SuperCap \r
+LSIP200199605 (DFCT) SW-Macon : Could not create multiple VDs in same array with DOSCLI \r
+LSIP200199197 (DFCT) MegaCLI online help report duplicate entry for PDInstantSecureErase \r
+LSIP200199860 (DFCT) MegaCli -PDCpyBk online help is not clear which could lead to data lost \r
+LSIP200209465 (DFCT) Porting of MegaSCU64 Linux \r
+LSIP200199316 (DFCT) MegaCLI online help does not show the value for "perfmode" \r
+LSIP200209270 (DFCT) Can not flash FW ( microcode fw for Cacheoffload controller) using MegaCLI 8.02.15 \r
+LSIP200200420 (DFCT) SCU DCLI: DCLI fails to display temparature of SATA drives, however, OS level apps( CLI and MSM) show the same \r
+LSIP200199345 (DFCT) MegaCli online help for "adpsetprop" missing some commands \r
+LSIP200198611 (DFCT) While installing RWC2_linux_64(11.08.02.01),CmdTool install asks for dependencies \r
+LSIP200199125 (DFCT) Macon MegaDCli : MegaDcli application hangs after creating the any VD. \r
+LSIP200199213 (DFCT) MegaCLI help should not have a separate section for array create and controller "get and set" features for PI \r
+LSIP200196784 (DFCT) MegaCli : Unable to create Cachecade VD using Megacli \r
+LSIP200209883 (DFCT) Issue in verifying CC2.0 feature support bit in CLI. \r
+LSIP200209882 (DFCT) Add CtrlId information as part AdpAllInfo command. \r
+LSIP200167604 (DFCT) After unzipping VMWare MegaCLI and executing it reports "Permission Denied" \r
+LSIP200199421 (DFCT) MegaCli Online help need to provide more information for commands with a "filename" input \r
+LSIP200200461 (DFCT) Enhanced Import option fails to be enabled \r
+LSIP200210113 (DFCT) Naming convention for CacheCade (Instead of IR using Defect) \r
+LSIP200186909 (CR) Enable copy back on SMART - TB \r
+LSIP200187637 (CR) Generally available support of selected battery modes for iBBU08. \r
+LSIP200187669 (CR) Update CacheCade product names in all utilities and user manuals \r
+\r
+\r
+Known Restrictions\r
+================\r
+1. NONE\r
+\r
+\r
+Known Bugs\r
+==========\r
+1. NONE\r
+\r
+\r
+Installation Commands: \r
+=======================\r
+\r
+Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
+\r
+\r
+\r
+\r
+\r
+Component:\r
+=========\r
+SAS MegaRAID MegaCLI\r
+Release Date: 08/11/2011\r
+\r
+\r
+Version Numbers: MegaCLI\r
+=============== =========== \r
+Current Version 8.02.16\r
+Previous Version 8.01.06\r
+\r
+\r
+Contents:\r
+=========\r
+This package contains MegaCLI for the following OSes:\r
+DOS\r
+FreeBSD\r
+Linux\r
+Solaris\r
+VMware\r
+Windows\r
+\r
+Use the MegaCLI components from the folder that matches your OS.\r
+\r
+\r
+\r
+Enhancements and Bug Fixes\r
+==========================\r
+LSIP200148740 (CO) (auto4comp UNIV_VIVA_Cli) MegaSCU (DOS4GW) change request to support OEM iBBU calibration process \r
+LSIP200148762 (CO) (auto4comp UNIV_VIVA_Cli) TB FW: Do not let WebBIOS to display "BBU Retention Time" and "Estimated Time To Recharge". \r
+LSIP200184338 (CO) (auto4comp UNIV_VIVA_Cli) TB FW Re-activate the user option to enable Patrol Read on SSD. \r
+LSIP200099745 (CO) (auto4comp UNIV_VIVA_Cli) Enclosure related CLI improvements \r
+LSIP200099746 (CO) (auto4comp UNIV_VIVA_PCLI) Enclosure related CLI improvements \r
+LSIP200099762 (CO) (auto4comp UNIV_VIVA_Cli) PD diag state - Shield State \r
+LSIP200099768 (CO) (auto4comp UNIV_VIVA_Cli) Shield state properties \r
+LSIP200099803 (CO) (auto4comp UNIV_VIVA_Cli) PD status commands under CLI \r
+LSIP200099804 (CO) (auto4comp UNIV_VIVA_PCLI) PD status commands under CLI \r
+LSIP200173292 (CO) (auto4comp UNIV_VIVA_Cli) FW to take PCI IDs & SAS Address out of SBR or TSOC (OEM selectable per value) \r
+LSIP200153885 (CO) (auto4comp UNIV_VIVA_Cli) Update MR SAS LSI applications for VMWare ESXi MN Release \r
+LSIP200099807 (CO) (auto4comp UNIV_VIVA_Cli) additional MR diags \r
+LSIP200099771 (CO) (auto4comp UNIV_VIVA_Cli) CLI battery commands \r
+LSIP200100159 (CO) (auto4comp UNIV_VIVA_Cli) CLI version command \r
+LSIP200154735 (CO) (auto4comp UNIV_VIVA_Cli) FreeBSD x64 support for 6Gb/s (TBolt) MegaRAID line \r
+LSIP200099844 (CO) (auto4comp UNIV_VIVA_Cli) Request to use Unconfigured Good Drives for a HotSpare if no spare defined. \r
+LSIP200099855 (CO) (auto4comp UNIV_VIVA_Cli) Emergency spare may ignore mixing policies \r
+LSIP200099877 (CO) (auto4comp UNIV_VIVA_Cli) DGs revertible HSP attributes sticky on adoption. \r
+LSIP200099896 (CO) (auto4comp UNIV_VIVA_Cli) Suspend / resume background tasks \r
+LSIP200088557 (CO) (auto4comp UNIV_VIVA_Cli) Need ability to RESET expander from behind MegaSAS \r
+LSIP200135217 (CO) (auto4comp UNIV_VIVA_Cli) SW licensing. Support FoD for PF activations on MegaRAID \r
+LSIP200150237 (CO) (auto4comp UNIV_VIVA_Cli) Need MFC bit for CacheCade 2.0 \r
+LSIP200150509 (CO) (auto4comp UNIV_VIVA_Cli) Need MFC bit for CacheCade 2.0 \r
+LSIP200099823 (CO) (auto4comp UNIV_VIVA_Cli) erase vd function \r
+LSIP200135617 (CO) (LSIP200106069) CLI. Add performance monitor related functions to MegaOEM \r
+LSIP200101547 (CO) (auto4comp UNIV_VIVA_Cli) iMR unconfigured disks naming for JBOD disks \r
+LSIP200101549 (CO) (auto4comp UNIV_VIVA_PCLI) iMR unconfigured disks naming for JBOD disks \r
+LSIP200112561 (DFCT) DIF: MegaSCU CMD adpsettings -read -f settings.txt a0 does not work \r
+LSIP200118922 (DFCT) Battery state option not available in CLI \r
+LSIP200121822 (DFCT) CLI version commands are not added in help file. \r
+LSIP200146132 (DFCT) MegaSCU needs to have a PR to set Mfg name & Mfg Date of StingRay ibbu \r
+LSIP200154218 (DFCT) MegaCli vague message displayed when SpinDownTime value is too big \r
+LSIP200168791 (DFCT) This defect is created to check-in files for Defects:LSIP200167601& LSIP200167602 \r
+LSIP200169584 (DFCT) Unable to flash 16mb file using adpM0flash on TB(MR controller) using CMDTOOL \r
+LSIP200171972 (DFCT) Enclosure temperatures are reported 20 deg C higher than actual temperature. \r
+LSIP200060991 (DFCT) DSIII: MegaCLI -adpgetprop defaultldpolicy -a0 return incorrect info \r
+LSIP200141543 (DFCT) DIF cli mixing nonPI and Pi pds found cfgalldreedrv command failed to create R0 Pi VD \r
+LSIP200147521 (DFCT) No syntax for VD erase operation on a VD in MegaCLI 8.02.07 \r
+LSIP200147590 (DFCT) MEGASCU Progdsply/showprog command displays the progress of REBUILD and PDCPYBK event even after suspended. \r
+LSIP200147591 (DFCT) MEGASCU-Patrol read info displays the state as "unknown" when the process is suspended . \r
+LSIP200173919 (DFCT) (Defer LSIP200168402) Patrol read info displays the state as "unknown" when the process is suspended . \r
+LSIP200173920 (DFCT) (Defer LSIP200168399) VD numbering in CLI using command ldpdinfo . \r
+LSIP200148211 (DFCT) Physical Disk information missing in command CFGDSPLY \r
+LSIP200148112 (DFCT) (RW LSIP200141543) DIF cli mixing nonPI and Pi pds found cfgalldreedrv command failed to create R0 Pi VD \r
+LSIP200149139 (DFCT) (RW LSIP200148112) (RW LSIP200141543) DIF cli mixing nonPI and Pi pds found cfgalldreedrv command failed to create R0 Pi \r
+LSIP200147977 (DFCT) add AdpGetPciInfo command options in CLI (help menu, DOS support) \r
+LSIP200148550 (DFCT) (RW LSIP200148211) Physical Disk information missing in command CFGDSPLY \r
+LSIP200147562 (DFCT) 8.00.41 on ESXi and ESX 4.1 gives "Permission Denied" after installing MegaCLI \r
+LSIP200149997 (DFCT) (7040217) (Defer LSIP200148994) MegaCli packages for both SPARC and x86 do not verify architecture type \r
+LSIP200184682 (DFCT) Dos MegaCli doesn't show AdpFWFlash command syntax in the help menu. \r
+LSIP200112950 (DFCT) MegaCli command CfgEachDskRaid0 -enblPI -a1 returns 0x01 error \r
+LSIP200113677 (DFCT) Enclosure serial number is not displaying in CLI and PCLI \r
+LSIP200114042 (DFCT) Enclosure FRU number and part number is not displaying in CLI \r
+LSIP200119731 (DFCT) Enclosure type option is not available in CLI \r
+LSIP200121825 (DFCT) Driver version command is not working in linux CLI \r
+LSIP200166294 (DFCT) Unable to flash 16mb file using adpM0flash on TB(MR controller) \r
+LSIP200174078 (DFCT) MegaCLI crashes during Advance Event Capture command \r
+LSIP200148073 (DFCT) Defect to deliver changes for PR LSIP200072686. \r
+LSIP200148459 (DFCT) CLI should not provide "Default" option in "Adpsetprop defaultldpspolicy" command. \r
+LSIP200148495 (DFCT) (Defer LSIP200147731) DSIII: Failed to Set Adapter Properties when run MegaCli -AdpSetProp -DefaultLdPSPolicy -Default - \r
+LSIP200148545 (DFCT) (RW LSIP200148495) (Defer LSIP200147731) DSIII: Failed to Set Adapter Properties when run MegaCli -AdpSetProp -DefaultLd \r
+LSIP200148300 (DFCT) PR LSIP200072686 requires release of CmdTool2 for MN \r
+LSIP200148511 (DFCT) VMware ESXi5.0 - MegaCLI does not work without export the library paths \r
+LSIP200148515 (DFCT) VMware ESXi 5.0 - CmdTool2 returns Segmentation Fault \r
+LSIP200151201 (DFCT) WB:Data not getting generated while trying to capture information through Megacli with IO running in background. \r
+LSIP200119733 (DFCT) Driver version not shown in CLI using "Megacli version driver" command. \r
+LSIP200113675 (DFCT) CLI version commands are not added in help page. \r
+LSIP200114029 (DFCT) Battery backup charge time is not as per scopping in CLI \r
+LSIP200111844 (DFCT) Remove unsupport DIF CMD in MegaCLI \r
+LSIP200119430 (DFCT) (RW LSIP200113679) MegaCLI "ldinfo" page Mirror data size is shown as reduntant data size \r
+LSIP200119788 (DFCT) Junk character display for SATA WWN field in CLI. \r
+LSIP200114071 (DFCT) Bad Block table information is not shown when execute the cli command with - lall. \r
+LSIP200121864 (DFCT) Enclosure FRU number and part number is not displaying in PCLI \r
+LSIP200123173 (DFCT) Getbbtentries command gives some corrected and uncorrected entries in PCLI eventhough no bad blocks exists \r
+LSIP200124552 (DFCT) MegaSCU: No help file for DIF support feature \r
+LSIP200138571 (DFCT) Defect to port PR-LSIP200100398 : Provide the chip version/revision for MegaRAID controllers thru MegaCLI \r
+LSIP200119187 (DFCT) (7002618) Unable to download disk f/w through MegaCLI \r
+LSIP200147898 (DFCT) SWR: Macon:SCU: Efi cli pdinfo for SATA drives shows junk value for Enquiry data . \r
+LSIP200148634 (DFCT) SWR:Macon:SCU-Cli shows max LD per array as 16. \r
+LSIP200150590 (DFCT) (RW LSIP200148634) SWR:Macon:SCU-Cli shows max LD per array as 16. \r
+LSIP200147485 (DFCT) Macon: In EFI environment CC cannot be started on a VD after performing Fast Init \r
+LSIP200151366 (DFCT) SWR:Macon:CLI versions are different as displayed when queried and in release notes \r
+LSIP200105726 (DFCT) Dummy defect for 11M02 PR \r
+LSIP200105748 (DFCT) Dummy Defect for Removing Comments from files \r
+LSIP200110822 (DFCT) MegaCli PdFWdown missing "-" before EncdevId \r
+LSIP200110789 (DFCT) MegaCli PD FW download to multiple devices not supported, command output needs to be changed \r
+LSIP200099006 (DFCT) For ibbu08, MegaCLI -GetBbuCapacityInfo returns zero for max error, remainging capacity alarm, and remaining time alarm \r
+LSIP200111893 (DFCT) Porting the defect LSIP200099006. \r
+LSIP200111888 (DFCT) Porting the defect LSIP200077064. (PreBootCli - AdpEventLog fails with exit code 0x01.) \r
+LSIP200113872 (DFCT) Diff PR Merging in 11m02 \r
+LSIP200113364 (DFCT) Suspend/Resume fails to work on windows Cli for CC \r
+LSIP200113851 (DFCT) CLI version commands are not working in PCLI \r
+LSIP200114598 (DFCT) PCli fails to work. \r
+LSIP200119427 (DFCT) Cli shows wrong information about Emergency spare \r
+LSIP200119254 (DFCT) FW crashes when execute "adpbbucmd" command in PCLI \r
+LSIP200120059 (DFCT) MegaCli fails to print the operation strings. \r
+LSIP200120725 (DFCT) Battery backup charge time is not as per scopping in CLI \r
+LSIP200114553 (DFCT) In Solaris and SPARC, Un installation time not removing MegaRAID directory. \r
+LSIP200122180 (DFCT) Name change for iBBU08 for TB. \r
+LSIP200152862 (DFCT) Need to CheckIn PR(LSIP200137246) (Univ_Viva_Cli)tools to address latency\r
+LSIP200154233 (DFCT) Battery type need to update \r
+LSIP200156117 (DFCT) MegaCli ShowSummary does not display system info \r
+LSIP200158424 (DFCT) OEM Enclosure PR need to be complete(49251) \r
+LSIP200168903 (DFCT) Progdsply/showprog command displays the progress of rebuild event even after it is suspended. \r
+LSIP200172526 (DFCT) The command showsummary doesnot display system information . \r
+LSIP200147689 (DFCT) Porting of CC2 PR \r
+LSIP200147743 (DFCT) need some extra changes for CC2 \r
+LSIP200148065 (DFCT) Porting Cache-offload PR \r
+LSIP200148087 (DFCT) UNIV_VIVA_Cli crashes when spanned array is created . \r
+LSIP200148138 (DFCT) Unable to capture performance data with Megacli64 \r
+LSIP200148231 (DFCT) Need to update perf mon cmd code \r
+LSIP200148465 (DFCT) CLI does not show if CahceCade 2 is enabled on the controller \r
+LSIP200148688 (DFCT) (RW LSIP200148465) CLI does not show if CahceCade 2 is enabled on the controller \r
+LSIP200144918 (DFCT) Line CacheOffload equals 0 causes Pre-Man to fail\r
+LSIP200148710 (DFCT) AdpHwDevice read command not working properly \r
+LSIP200148711 (DFCT) Porting the Pr-97510 \r
+LSIP200148835 (DFCT) Porting PR-55434 \r
+LSIP200149728 (DFCT) UNIV_VIVA_cli fails to create Virtual Drives using latest cachecade firmware . \r
+LSIP200150311 (DFCT) WB:Megacli crashes while trying to capture information when IO is running in background. \r
+LSIP200150662 (DFCT) Name changeing for Cache cade feature \r
+LSIP200104408 (DFCT) LSIP200049226, LSIP200049215 PD/VD secure erase \r
+LSIP200105750 (DFCT) Dummy defect to check in secure erase changes \r
+LSIP200111056 (DFCT) MegaCLI 8.01.01 enable/disables PI command does not work \r
+LSIP200111338 (DFCT) Megacli Ver 8.01.01-DIF does not show VD properties if PI is enable or disabled \r
+LSIP200111846 (DFCT) MegaCLI should not allow to enable DIF with Liberator controller \r
+LSIP200112378 (DFCT) improvement needed for output of ./MegaCli LdGetProp -dsblpi -l0 -a2 and ldinfo \r
+LSIP200119591 (DFCT) MegaCli fails to work \r
+LSIP200119449 (DFCT) CLI : After aborting VD erase on a VD, veifying prog dsply , shows as Check Consistency on VD not in progress. \r
+LSIP200121826 (DFCT) In CLI help file "UEFI" command is not added in version commands. \r
+LSIP200121841 (DFCT) "Version uefi a0" failed to show UEFI version in EFI host CLI \r
+LSIP200124586 (DFCT) (RW LSIP200121841) "Version uefi a0" failed to show UEFI version in EFI host CLI \r
+LSIP200124588 (DFCT) (RW LSIP200121826) In CLI help file "UEFI" command is not added in version commands. \r
+LSIP200173918 (DFCT) EFI CLI- Driver seperation changes \r
+LSIP200170447 (DFCT) efiHostCli does not work with 2208 products \r
+LSIP200148615 (DFCT) SWR:Macon:DCLI: DCLI does not support 8 drives. \r
+LSIP200148613 (DFCT) SWR:Macon:DCLI:Appropriate error messgae should be displayed for Background operation not supported \r
+LSIP200155836 (DFCT) Megacli ldgetprop consistency lx aN gives invalid output \r
+LSIP200156087 (DFCT) CLI command to enable DPM is not shown in help file but it works. \r
+LSIP200166715 (DFCT) (RW LSIP200159708) CLI does not read entire package version during flashing, causing FW upgrade to report error \r
+LSIP200148921 (DFCT) Forward Porting the changes \r
+LSIP200100106 (DFCT) Assgning the VD numbering issue in Cli after deletion of VDs \r
+LSIP200121545 (DFCT) VD Numbering issue in CLI after deletion of VD. \r
+LSIP200122430 (DFCT) By typing MegaOem commands like v,help.. It shows all MegaSCU commands, and working like MegaSCU \r
+LSIP200123575 (DFCT) (CL LSIP200123543) Fahrenheit values are not shown for SATA and SSD drives in CLI drive temperature field. \r
+LSIP200099360 (DFCT) Porting 10M08 changes to 10M09 and 10M12 \r
+LSIP200100910 (DFCT) FW reports more than 1 enclosures in enclosure list while connect only 1 enclosure with multi path \r
+LSIP200113012 (DFCT) Using MegaCLI to create a RAID1 array under FreeBSD 8.1 result in an error message: No match \r
+LSIP200123317 (DFCT) MegaCli is unable to create VD with power policy settings. \r
+LSIP200105052 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted \r
+LSIP200105743 (DFCT) cfgeachdskraid0 command fails \r
+LSIP200106000 (DFCT) Dummy defect to modify PCLI flash address \r
+LSIP200120037 (DFCT) Mode 0 flash support for TB controllers with 32MB flash \r
+\r
+\r
+\r
+Known Restrictions\r
+================\r
+1. NONE\r
+\r
+\r
+Known Bugs\r
+==========\r
+1. NONE\r
+\r
+\r
+Installation Commands: \r
+=======================\r
+\r
+Run MegaCli from the Command Prompt. Use -h option to see help menu.\r
+\r
+\r
+\r
+\r
+SAS MegaRAID MegaCLI\r
+Release Date: 02/28/2011\r
+\r
+\r
+Version Numbers: MegaCLI\r
+=============== =========== \r
+Current Version 8.01.06\r
+Previous Version 8.00.40\r
+\r
+\r
+Enhancements and Bug Fixes\r
+==========================\r
+Added support for 9265-8i and 9285-8e controllers\r
+LSIP200101547 (CO) iMR unconfigured disks naming for JBOD disks \r
+LSIP200101549 (CO) iMR unconfigured disks naming for JBOD disks \r
+LSIP200072536 (CO) Phy Info (Direct Attached) reporting \r
+LSIP200072543 (CO) Phy Settings (Direct Attached) \r
+LSIP200072524 (CO) Advanced Event Capture \r
+LSIP200089240 (DFCT) We need to Set Permission while executing the CLI in Linux (SLES 11-64bit) \r
+LSIP200084303 (DFCT) Can not flash FW using MegaCLI on 9265 Controller. Works in MSM. \r
+LSIP200095215 (DFCT) Megaware makefile changes \r
+LSIP200099543 (DFCT) Windows Megacli for Vmware unable to detect the Vmware Server Host controller iMR 9285 \r
+LSIP200100106 (DFCT) Assgning the VD numbering issue in Cli after deletion of VDs \r
+LSIP200121545 (DFCT) VD Numbering issue in CLI after deletion of VD. \r
+LSIP200122430 (DFCT) By typing MegaOem commands like v,help., it shows wrong commands\r
+LSIP200123575 (DFCT) (CL LSIP200123543) Fahrenheit values are not shown for SATA and SSD drives in CLI drive temperature field. \r
+LSIP200099360 (DFCT) Porting 10M08 changes to 10M09 and 10M12 \r
+LSIP200100910 (DFCT) FW reports more than 1 enclosures in enclosure list while connect only 1 enclosure with multi path \r
+LSIP200113012 (DFCT) Using MegaCLI to create a RAID1 array under FreeBSD 8.1 result in an error message: No match \r
+LSIP200123317 (DFCT) MegaCli is unable to create VD with power policy settings. \r
+LSIP200085810 (DFCT) MegaCli PdFwDownload output missing a dash \r
+LSIP200089295 (DFCT) -adpsettings command is not expecting "s" on end of "EnableLedHeaders" setting \r
+LSIP200089930 (DFCT) Junk character in the help message for \93encinfo\94 command \r
+LSIP200095273 (DFCT) MegaCLI 8.00.30 crashed during a -adpallinfo command to an iMR controller. \r
+LSIP200110822 (DFCT) MegaCli PdFWdown missing "-" before EncdevId \r
+LSIP200110789 (DFCT) MegaCli PD FW download to multiple devices not supported, command output needs to be changed \r
+LSIP200099006 (DFCT) For ibbu08, MegaCLI -GetBbuCapacityInfo returns zero for max error, remainging capacity alarm, and remaining time alarm \r
+LSIP200111893 (DFCT) Porting the defect LSIP200099006. \r
+LSIP200111888 (DFCT) Porting the defect LSIP200077064. (PreBootCli - AdpEventLog fails with exit code 0x01.) \r
+LSIP200122180 (DFCT) Name change for iBBU08 for 9265 \r
+LSIP200081963 (DFCT) Cannot clear DPM data using the -clear option \r
+LSIP200077322 (DFCT) CLI displays incorrect information when DPM lct command is issue \r
+LSIP200077324 (DFCT) CLI displays data from DPM histogram command incorrectly \r
+LSIP200077326 (DFCT) Latest CLI reports error when issue any AEC command (All AEC commands are not working) \r
+LSIP200083390 (DFCT) Defect to accomodate API changes in MegaWare1.2 boxcar \r
+LSIP200085172 (DFCT) MegaCLI output for DPM ext command does not align correctly \r
+LSIP200094822 (DFCT) Porting defect fixes from 10M09 to 10M12 \r
+LSIP200097425 (DFCT) DIF syntax errors AdpSetprop -preventPiImport \r
+LSIP200105052 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted \r
+LSIP200105743 (DFCT) cfgeachdskraid0 command fails \r
+LSIP200106000 (DFCT) Dummy defect to modify PCLI flash address \r
+LSIP200120037 (DFCT) Mode 0 flash support for TB controllers with 32MB flash \r
+LSIP200083430 (DFCT) Implementation of MegaWare 1.1 in MegaPCLI \r
+LSIP200084039 (DFCT) MegaWare support code changes \r
+LSIP200075421 (DFCT) SWR: MegaDcli takes too much to execute command \r
+LSIP200087724 (DFCT) Intermittent issue seen while Clearing Configuraton through MegaCLI in RHEL 6 B2 64bit \r
+LSIP200097535 (DFCT) Dummy defect to update version of DCLI \r
+LSIP200097793 (DFCT) EFI Cli is displaying "Created VD0" even for 2nd VD \r
+LSIP200097811 (DFCT) To check in EFI CLI binary \r
+LSIP200089369 (DFCT) (#33990.1) Incorrect Display View Mirror Infos for all VD's in Windows CLI \r
+LSIP200096227 (DFCT) By pressing Ctrl-Y(PCLI) in POST message, its going to megamon in fw and also not getting pcli command promot . \r
+LSIP200096792 (DFCT) CLI crashes when using "\96snapshot \96info" command on the repository VD \r
+LSIP200097032 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted \r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+Release Date: 12/10/2010\r
+\r
+\r
+Version Numbers: MegaCLI\r
+=============== =========== \r
+Current Version 8.00.40\r
+Previous Version 8.00.29\r
+\r
+\r
+Enhancements and Bug Fixes\r
+==========================\r
+LSIP200097574 (DFCT) MegaCliKL is not able to access the Host Machine \r
+LSIP200063469 (CO) Check internal backplane SES page for Backplane Bay ID and display in mgmt tools \r
+LSIP200063410/LSIP200063415 (CO) Break R1 Mirror \r
+LSIP200063457 (CO) Support for variable rate HDDs \r
+LSIP200075203 (CO) RAID Firmware to read controller thermal sensors to get chip and board temps \r
+LSIP200070634 (CO) Customer requested these EFI:CLI commands are required for their testing \r
+LSIP200073881 (CO) Provide PCI bus and device id for a selected controller thru MegaCLI \r
+LSIP200072376 (CO) SWRAID. Develop CLI for uEFI 2.2 \r
+LSIP200083287 (CO) SW licensing. Verbiage changes in MegaRAID management tools \r
+LSIP200076197 (DFCT) \93No more interfaces\94 on executing most of the CLI command \r
+LSIP200075420 (DFCT) SWR: MegaDCli does not detect the PDs \r
+LSIP200076437 (DFCT) SWR5: Unable to create Raid 5 thru DCLI \r
+LSIP200087722 (DFCT) DCLI -After creating R5, we can\92t delete the VD or clear the config. \r
+LSIP200084490 (DFCT) Porting 10M08 chnages to 10M09 \r
+LSIP200085665 (DFCT) "MegaCli pdfwdownload" command is not flashing PD Firmware for Multiple PD's at a time. \r
+LSIP200087720 (DFCT) DCLI - Version Info showing wrong Date. \r
+LSIP200085497 (DFCT) SWR5: Cannot create config and clear config using EFI CLI \r
+LSIP200087729 (DFCT) DCLI/EFI CLI - "pdfwdownload" command is not exists in the help file of DCLI and EFI CLI. \r
+LSIP200075421 (DFCT) SWR: MegaDcli takes too much to execute command \r
+LSIP200087724 (DFCT) Intermittent issue seen while Clearing Configuraton through MegaCLI in RHEL 6 B2 64bit \r
+LSIP200097793 (DFCT) EFI Cli is displaying "Created VD0" even for 2nd VD \r
+LSIP200082937 (DFCT) Defect to merge DSW-3 code \r
+LSIP200084314 (DFCT) AutoDeleteOldestSnapshot doesn\92t work in the CLI \r
+LSIP200018606/LSIP200018607 (DFCT) "./MegaCli64 adpeventlog getlatest n ax" fails when ldbi is running on the controllers \r
+LSIP200087587 (DFCT) Defect to accomodate for non-availablity of DSW-3 feature on iMR controllers \r
+LSIP200089369 (DFCT) (#33990.1) Incorrect Display View Mirror Infos for all VD's in Windows CLI \r
+LSIP200096227 (DFCT) By pressing Ctrl-Y(PCLI) in POST message, its going to megamon in fw and also not getting pcli command promot . \r
+LSIP200096792 (DFCT) CLI crashes when using "\96snapshot \96info" command on the repository VD \r
+LSIP200097032 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted \r
+LSIP200085810 (DFCT) MegaCli PdFwDownload output missing a dash \r
+LSIP200089295 (DFCT) -adpsettings command is not expecting "s" on end of "EnableLedHeaders" setting \r
+LSIP200089930 (DFCT) Junk character in the help message for \93encinfo\94 command \r
+LSIP200095273 (DFCT) MegaCLI 8.00.30 crashed during a -adpallinfo command to a iMR controller. \r
+LSIP200076406 (DFCT) CLI displays 'Stripe' size instead of displaying 'Strip' size in adpallinfo info page \r
+LSIP200082223 (DFCT) "MegaCli -AdpAliLog a0" command showing wrong Adapter values in the adapterinfo field. \r
+LSIP200018511 (DFCT) Linux "MegaCli adpalilog a0" displays garbage, also missing key data comparing to Windows output. \r
+LSIP200082785 (DFCT) Support of AdpGetPciInfo command for recent stream \r
+LSIP200083564 (DFCT) Megacli-8.00.28 : Megacli does not give any progress value for initialization on LD with progdsply \r
+LSIP200086230 (DFCT) Different TimeStamps values in MegaCLI Ctrl Eventlog \r
+LSIP200075258 (DFCT) Create separate binary to configure VMware ESXi through MegaCLI. \r
+LSIP200082000 (DFCT) Help file needs to be updated for MegaCliKL. \r
+LSIP200082431 (DFCT) PFK - MFT_STAT Support \r
+LSIP200077081 (DFCT) Information For Command Parameters is missing in HELP file for the ADPBBUCMD command \r
+LSIP200073835 (DFCT) MegaCLI Enclosure Inquiry returns irrelevant in Vendor Specific Information field \r
+LSIP200076725 (DFCT) Spelling mistake in one of the output of CLI command \r
+\r
projects / my-stuff / megacli.git / commitdiff