maybe chmod 0644 'conf.d/pydoc-2.7'
maybe chmod 0644 'conf.d/pydoc-3.4'
maybe chmod 0644 'conf.d/rsyncd'
+maybe chmod 0644 'conf.d/rsyslog'
maybe chmod 0644 'conf.d/salt-api'
maybe chmod 0644 'conf.d/salt-master'
maybe chmod 0644 'conf.d/salt-minion'
maybe chmod 0755 'init.d/reboot.sh'
maybe chmod 0755 'init.d/root'
maybe chmod 0755 'init.d/rsyncd'
+maybe chmod 0755 'init.d/rsyslog'
maybe chmod 0755 'init.d/s6-svscan'
maybe chmod 0755 'init.d/salt-api'
maybe chmod 0755 'init.d/salt-master'
maybe chmod 0644 'logrotate.d/openrc'
maybe chmod 0644 'logrotate.d/ppd'
maybe chmod 0644 'logrotate.d/rsyncd'
+maybe chmod 0644 'logrotate.d/rsyslog'
maybe chmod 0644 'logrotate.d/salt'
maybe chmod 0644 'logrotate.d/syslog-ng'
maybe chmod 0644 'lsb-release'
maybe chmod 0755 'rmt'
maybe chmod 0644 'rpc'
maybe chmod 0644 'rsyncd.conf'
+maybe chmod 0644 'rsyslog.conf'
+maybe chmod 0755 'rsyslog.d'
+maybe chmod 0644 'rsyslog.d/.keep_app-admin_rsyslog-0'
+maybe chmod 0644 'rsyslog.d/50-default.conf'
maybe chmod 0755 'runlevels'
maybe chmod 0755 'runlevels/boot'
maybe chmod 0755 'runlevels/default'
maybe chmod 0644 'ssl/openssl.cnf'
maybe chmod 0700 'ssl/private'
maybe chmod 0644 'ssl/private/.keep_dev-libs_openssl-0'
+maybe chmod 0755 'ssl/rsyslog'
+maybe chmod 0644 'ssl/rsyslog/.keep_app-admin_rsyslog-0'
maybe chmod 0755 'ssmtp'
maybe chmod 0644 'ssmtp/revaliases'
maybe chgrp 'ssmtp' 'ssmtp/ssmtp.conf'
--- /dev/null
+# /etc/conf.d/rsyslog
+
+# Configuration file
+RSYSLOG_CONFIGFILE="/etc/rsyslog.conf"
+
+# PID file
+# If you should ever change this, remember to update
+# "/etc/logrotate.d/rsyslog", too.
+RSYSLOG_PIDFILE="/run/rsyslogd.pid"
+
+# You can use this configuration option to pass additional options to the
+# start-stop-daemon, see start-stop-daemon(8) for more details.
+# Per default we wait 1000ms after we have started the service to ensure
+# that the daemon is really up and running.
+RSYSLOG_SSDARGS="--wait 1000"
+
+# The termination timeout (start-stop-daemon parameter "retry") ensures
+# that the service will be terminated within a given time (60 + 5 seconds
+# per default) when you are stopping the service.
+# You need to increase the value when you are working with a large queue.
+# See http://www.rsyslog.com/doc/queues.html for further information.
+RSYSLOG_TERMTIMEOUT="TERM/60/KILL/5"
+
+
+# Options to rsyslogd
+# See rsyslogd(8) for more details
+# Notes:
+# * Do not specify another PIDFILE but use the variable above to change the location
+# * Do not specify another CONFIGFILE but use the variable above to change the location
+RSYSLOG_OPTS=""
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+RSYSLOG_CONFIGFILE=${RSYSLOG_CONFIGFILE:-"/etc/rsyslog.conf"}
+RSYSLOG_PIDFILE=${RSYSLOG_PIDFILE:-"/run/rsyslogd.pid"}
+
+command="/usr/sbin/rsyslogd"
+command_args="${RSYSLOG_OPTS} -f ${RSYSLOG_CONFIGFILE} -i ${RSYSLOG_PIDFILE}"
+start_stop_daemon_args="${RSYSLOG_SSDARGS}"
+pidfile="${RSYSLOG_PIDFILE}"
+retry="${RSYSLOG_TERMTIMEOUT}"
+
+required_files="${RSYSLOG_CONFIGFILE}"
+
+description="RSYSLOG is the rocket-fast system for log processing (syslog replacement)."
+
+extra_commands="configtest"
+extra_started_commands="rotate"
+
+description_configtest="Run rsyslogd's internal config check."
+
+description_rotate="Sends rsyslogd a signal to re-open its log files."
+
+depend() {
+ need clock hostname localmount
+ provide logger
+}
+
+start_pre() {
+ if [ "${RC_CMD}" != "restart" ]; then
+ configtest || return 1
+ fi
+}
+
+stop_pre() {
+ if [ "${RC_CMD}" = "restart" ]; then
+ configtest || return 1
+ fi
+}
+
+stop_post() {
+ rm -f ${RSYSLOG_PIDFILE}
+}
+
+configtest() {
+ # This will currently only detect fatal errors
+ # See https://github.com/rsyslog/rsyslog/issues/79
+
+ local _test_command="${command} -N 999 -f ${RSYSLOG_CONFIGFILE}"
+ local _retval=0
+
+ ebegin "Checking rsyslogd's configuration"
+ ${_test_command} >/dev/null 2>&1
+ _retval=$?
+
+ if [ ${_retval} -ne 0 ]; then
+ ${_test_command}
+ fi
+
+ eend ${_retval} "failed, please correct errors above"
+}
+
+rotate() {
+ ebegin "Re-opening rsyslogd logs"
+ start-stop-daemon --signal SIGHUP --pidfile "${RSYSLOG_PIDFILE}"
+ eend $?
+}
--- /dev/null
+# Uncomment the following directive if you have re-enabled
+# "/var/log/syslog" in "/etc/rsyslog.d/50-default.conf"
+#/var/log/syslog
+#{
+# rotate 7
+# daily
+# missingok
+# notifempty
+# delaycompress
+# compress
+# postrotate
+# test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+# endscript
+#}
+
+/var/log/auth.log
+/var/log/cron.log
+/var/log/daemon.log
+/var/log/kern.log
+/var/log/lpr.log
+/var/log/mail.log
+/var/log/news.log
+/var/log/user.log
+/var/log/debug.log
+/var/log/messages
+{
+ rotate 4
+ weekly
+ missingok
+ notifempty
+ compress
+ delaycompress
+ sharedscripts
+ postrotate
+ test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
+ endscript
+}
--- /dev/null
+# /etc/rsyslog.conf
+#
+# This configuration is based on RainerScript, the new recommended syntax
+# for RSYSLOG. See http://www.rsyslog.com/doc/rainerscript.html for further
+# details.
+#
+# But if you don't want to learn something new at moment, don't worry: The
+# legacy syntax is still supported.
+#
+# You may want to use the new RSYSLOG configuration builder to create your
+# own more advanced configuration: http://www.rsyslog.com/rsyslog-configuration-builder/
+
+# Check config syntax on startup and abort if unclean (default: off)
+#$AbortOnUncleanConfig on
+
+
+###############
+### MODULES ###
+###############
+
+# Read syslog messages from default Unix socket /dev/log (e.g. via logger command)
+module(load="imuxsock")
+
+# Read messages from the kernel log and submits them to the syslog engine
+module(load="imklog")
+
+# Inject "--MARK--" messages every $Interval (seconds)
+#module(load="immark" Interval="600")
+
+# Read syslog messages from UDP
+#module(load="imudp")
+#input(type="imudp" port="514")
+
+# Read syslog messages from TCP
+#module(load="imtcp")
+#input(type="imtcp" port="514")
+
+
+#########################
+### GLOBAL DIRECTIVES ###
+#########################
+
+# Where to place spool and state files
+$WorkDirectory /var/spool/rsyslog
+
+# Reduce repeating messages (default: off)
+#$RepeatedMsgReduction on
+
+# Set defaults for every output file
+$Umask 0022
+
+module(
+ load="builtin:omfile"
+ Template="RSYSLOG_TraditionalFileFormat"
+ FileCreateMode="0644"
+ DirCreateMode="0755"
+)
+
+
+# Include all conf files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
--- /dev/null
+#######################
+### DEFAULT ACTIONS ###
+#######################
+
+auth,authpriv.* action(
+ type="omfile"
+ File="/var/log/auth.log"
+ FileCreateMode="0600"
+ FileOwner="root"
+ FileGroup="adm"
+ Sync="off"
+)
+
+cron.* action(
+ type="omfile"
+ File="/var/log/cron.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+daemon.* action(
+ type="omfile"
+ File="/var/log/daemon.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+kern.* action(
+ type="omfile"
+ File="/var/log/kern.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+lpr.* action(
+ type="omfile"
+ File="/var/log/lpr.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+mail.* action(
+ type="omfile"
+ File="/var/log/mail.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+news.* action(
+ type="omfile"
+ File="/var/log/news.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+user.* action(
+ type="omfile"
+ File="/var/log/user.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+*.=debug;auth,authpriv,news,mail.none action(
+ type="omfile"
+ File="/var/log/debug.log"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+*.info;auth,authpriv,cron,daemon,lpr,mail,news.none action(
+ type="omfile"
+ File="/var/log/messages"
+ FileOwner="root"
+ FileGroup="adm"
+)
+
+# Uncomment the following directive to re-enable the
+# deprecated "/var/log/syslog" log file (don't forget to re-enable log
+# rotation in "/etc/logrotate.d/rsyslog" if you do that!)
+#*.*;auth,authpriv.none action(
+# type="omfile"
+# File="/var/log/syslog"
+# FileOwner="root"
+# FileGroup="adm"
+#)
+
+*.emerg action(
+ type="omusrmsg"
+ Users="*"
+ action.execOnlyOnceEveryInterval="10"
+)
+
+# Create an additional socket for the default chroot location
+# (used by net-misc/openssh[hpn], see https://bugs.gentoo.org/490744)
+input(type="imuxsock" Socket="/var/empty/dev/log")